summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/wl12xx/ps.c
AgeCommit message (Collapse)AuthorFilesLines
2012-04-12wireless/wl12xx/wl1251: move TI WLAN modules to a common ti subdirectoryLuciano Coelho1-304/+0
Move wl12xx and wl1251 modules into a new drivers/net/wireless/ti directory. Add a TI WLAN Kconfig option and Makefile to support this change. Signed-off-by: Luciano Coelho <coelho@ti.com> Cc: John W. Linville <linville@tuxdriver.com>
2012-02-28wl12xx: set the ELP entry delay to the FW dyn-ps timeoutArik Nemtsov1-3/+1
With PSM handled in FW, the checks in wl1271_elp_work() are always true. Thus during active traffic we constantly enter and exit ELP (many times per second). As each ELP exit takes ~10ms, this can have an adverse effect on throughput and interactivity. Set the ELP timeout to the dyn-ps timeout. This period is longer and avoids the above problem. It also makes sense to stay out of ELP while we are awake on the network, to minimize delays in Tx/Rx. The same thing was done by the mac80211 dynamic-ps mechanism before the FW DPS changes. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-15wl12xx: add forced_ps modeEyal Shapira1-5/+5
For certain WiFi certification tests forcing PS is necessary. Since DPS is now enabled in the FW and this can't be achieved by using netlatency this required a new config option. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-15wl12xx: Set different wake up conditions in case of suspendEyal Shapira1-1/+3
Added ability to set different wake up conditions for suspend/resume. Set default values to wake up every 3 DTIMs while suspended and every 1 DTIM while resumed Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-15wl12xx: change WLVIF_FLAG_PSM name and remove WLVIF_FLAG_PSM_REQUESTEDEyal Shapira1-4/+4
WLVIF_FLAG_PSM turned to WLVIF_FLAG_IN_AUTO_PS which marks that this vif is in AUTO PS. WLVIF_FLAG_PSM_REQUESTED is not required as mac80211 calls op_config with CONF_PS after association. wl12xx_config_vif() handling of CONF_PS was simplified and cleaned up. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-15wl12xx: enable/disable BET with AUTO_PS/ACTIVEEyal Shapira1-0/+7
While the FW with dynamic PS controls BET when going to PSM and back internally within the FW, there's still a need to enable it from the driver at least once (so enable on every entry to AUTO_PS) and disable it once we explicitly go back to STATION_ACTIVE_MODE. BET isn't relevant for 5GHz Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-15wl12xx: remove 2 unused parameters in wl1271_ps_set_mode()Eyal Shapira1-1/+1
cleanup 2 unused parameters of wl1271_ps_set_mode Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-02-15wl12xx: add support for HW dynamic PSEyal Shapira1-5/+10
FW now supports dynamic PS so we don't need to use mac80211 support. FW will go to PSM after a specified timeout with no Rx/Tx traffic. - Changed FW API to include new PS mode (AUTO_MODE) and including timeout parameter - The default PS mode would be dynamic PS - Default timeout is 100ms (same as it used to be in mac80211) - Avoid using mac80211 APIs to disable/enable dynamic PS as we're not using mac80211 PS control anymore. - COEX is handled by the FW while in dynamic PS so removed handling of SOFT_GEMINI Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-12-21wl12xx: make WL1271_FLAG_IDLE flag per-vifEliad Peller1-2/+8
This flag should be set per-vif, rather than globally. Rename the flag to indicate IN_USE (rather than IDLE), as in the default configuration (i.e. flag is clear) the vif should be idle. Change all the bit operations (and elp conditions) appropriately. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-11-08wl12xx: keep beacon-filtering enabled during STA operationArik Nemtsov1-5/+0
Enable beacon filtering on STA init, and don't disable it when entering active mode. Otherwise dynamic-PS supports means we receive beacons from the current AP during any Tx/Rx performed by the driver. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11wl12xx: move debugging definitions to a separate fileLuciano Coelho1-0/+1
Separate the debugging macros and other definitions to a new debug.h file. This is be needed because the sdio and spi modules don't need to depend on the wl12xx module anymore, but still need to include wl12xx.h. Currently they do depend on it, because of the debugging global that wl12xx exports. A future patch will remove this dependency. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11wl12xx: replace all remaining wl->vif referencesEliad Peller1-4/+7
wl->vif is appropriate only when a single vif is being used. Instead, pass wlvif as parameter or iterate through all the vifs (e.g. when a global configuration was changed) Leave wl->vif only to determine whether a vif was already added (this check will be removed as well after both the driver and fw will support multiple vifs) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11wl12xx: add band field to wlvifEliad Peller1-1/+1
add band field into the per-interface data. mac80211 configures some values (e.g. band, channel) globally, while we configure them per-interface. In order to make it easier to keep track of the configured value for each value while keeping sync with mac80211, save these values both globally and per-vif. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-11wl12xx: make WL1271_FLAG_PSM flag per-vifEliad Peller1-8/+17
move WL1271_FLAG_PSM and WL1271_FLAG_PSM_REQUESTED into per-vif flags. These flags should be set per-vif, rather than globally. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-07wl12xx: move role_id into wlvifEliad Peller1-7/+7
move role_id into the per-interface data, rather than being global. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-09-14wl12xx: don't indicate up PS-filtered dummy packetsArik Nemtsov1-2/+6
Dummy packets are currently only sent on the system_hlid link. The system_hlid link should never be filtered for PS (as it is not a STA link). Even so, for correctness, don't indicate dummy packets up. The skb does not belong to mac80211 and as such does not contain a correct skb->cb. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-08-22wl12xx: enable AP advanced functionalityArik Nemtsov1-2/+2
This adjusts FW TX block allocation for connected stations in PS. Firmware congestion is measured in allocated packets instead of blocks. Allow a link in PS to queue up to 2 packets to the FW. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-07-08wl12xx: start/stop queues according to global per-AC countersArik Nemtsov1-3/+6
Split tx_queue_count to count per-AC skb's queued, instead of relying on the skb-queue len. The skb queues used were only valid in STA-mode, as AP-mode uses per-link queues. This fixes a major regression in AP-mode, caused by the patch "wl12xx: implement Tx watermarks per AC". With that patch applied, we effectively had no regulation of Tx queues in AP-mode. Therefore a sustained high rate of Tx could cause exhaustion of the skb memory pool. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-06-27wl12xx: Avoid recovery while one is already in progressIdo Yariv1-1/+1
During recovery work commands sent to the FW could fail and schedule additional recovery work. Since the chip is going to be powered off, avoid recursive recoveries. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-06-27wl12xx: use _ni version of ieee80211_tx_statusEliad Peller1-1/+1
wl1271_flush_deferred_work(), which calls ieee80211_rx() and ieee80211_tx_status(), is called from a process context. hence, use ieee80211_tx_status_ni() instead of ieee80211_tx_status(). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-06-27wl12xx: Enable beacon early termination in 2.4GHz band onlyShahar Levi1-3/+5
Beacon early termination doesn't help much in the 5GHz band and masks channel switch IE Beacons. Thus, change the code to use BET only in 2.4GHz. [Reworded the commit log slightly -- Luca.] Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-05-02wl12xx: avoid premature elp entranceEliad Peller1-6/+24
The elp_work is being enqueued on wl1271_ps_elp_sleep, but doesn't get cancelled on wl1271_ps_elp_wakeup. This might cause immediate entrance to elp when the wl->mutex is being released, rather than using the delayed enqueueing optimization. Cancel elp_work on wakeup request, and add a new WL1271_FLAG_ELP_REQUESTED flag to further synchronize the elp actions. [Fixed a couple of typos in some comments -- Luca] Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-04-19wl12xx: rearrange some ELP wake_up/sleep callsEliad Peller1-3/+0
ELP (Extremely/Enhanced Low Power, or something like that ;)) refers to the powerstate of the 12xx chip, in which very low power is consumed, and no commands (from the host) can be issued until the chip is woken up. Wakeup/sleep commands must be protected by a wl->mutex, so it's generally a good idea to call wakeup/sleep along with the mutex lock/unlock (where needed). However, in some places the wl12xx driver calls wakeup/sleep in some "inner" functions. This result in some "nested" wakeup/sleep calls which might end up letting the chip go to sleep prematurely (e.g. during event handling). Fix it by rearranging the elp calls to come along with mutex_lock/unlock. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-03-03wl12xx: Switch to a threaded interrupt handlerIdo Yariv1-3/+3
To achieve maximal throughput, it is very important to react to interrupts as soon as possible. Currently the interrupt handler wakes up a worker for handling interrupts in process context. A cleaner and more efficient design would be to request a threaded interrupt handler. This handler's priority is very high, and can do blocking operations such as SDIO/SPI transactions. Some work can be deferred, mostly calls to mac80211 APIs (ieee80211_rx_ni and ieee80211_tx_status). By deferring such work to a different worker, we can keep the irq handler thread more I/O responsive. In addition, on multi-core systems the two threads can be scheduled on different cores, which will improve overall performance. The use of WL1271_FLAG_IRQ_PENDING & WL1271_FLAG_IRQ_RUNNING was changed. For simplicity, always query the FW for more pending interrupts. Since there are relatively long bursts of interrupts, the extra FW status read overhead is negligible. In addition, this enables registering the IRQ handler with the ONESHOT option. Signed-off-by: Ido Yariv <ido@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23wl12xx: AP-mode - management of links in PS-modeArik Nemtsov1-0/+80
Update the PS mode of each link according to a bitmap polled from fw_status. Manually notify mac80211 about PS mode changes in connected stations. mac80211 will only be notified about PS start when the station is in PS and there is a small number of TX blocks from this link ready in HW. This is required for waking up the remote station since the TIM is updated entirely by FW. When a station enters mac80211-PS-mode, we drop all the skbs in the low-level TX queues belonging to this sta with STAT_TX_FILTERED to keep our queues clean. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-23wl12xx: AP-mode - count free FW TX blocks per linkArik Nemtsov1-2/+0
Count the number of FW TX blocks allocated per link. We add blocks to a link counter when allocated for a TX descriptor. We remove blocks according to counters in fw_status indicating the number of freed blocks in FW. These counters are polled after each IRQ. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-02-09wl12xx: move to new firmware (6.1.3.50.49)Eliad Peller1-4/+2
This patch adds support for the new wl12xx firmware (Rev 6.1.3.50.49) Since this fw is not backward compatible with previous fw versions, a new fw (with different name) is being fetched. (the patch is big because it contains all the required fw api changes. splitting it into multiple patches will result in corrupted intermediate commits) Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2010-11-22wl1271: Change wl12xx Files NamesShahar Levi1-0/+178
All files name prefix removed due to the fact that wl12xx driver supports wl1271 and wl1273. Also the definition in Kconfig and header files changed respectively. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2009-07-10wl1251: add wl1251 prefix to all 1251 filesKalle Valo1-147/+0
Now that all 1271 files are split, we can add wl1251_ prefix to the files. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: enable ELP modeKalle Valo1-5/+1
ELP mode is working now, let's enable it so that the firmware can sleep and reduce power consumption. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10wl12xx: cmd and acx interface reworkKalle Valo1-1/+1
Rework cmd and acx interfaces, it was just too confusing earlier. Now all commands need to contain all the needed headers, either just cmd headers or both cmd and acx headers. This accomplish to remove the extra copy done for each command. The interfaces are now properly documented as well. Also try to make all commands safe for DMA transfers. I might have missed some, but most of them should be fixed now. And this is not all! As a free bonus you will also get some cosmetic cleanups and code reorganisation. Order today! Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-06wl12xx: add driverKalle Valo1-0/+151
wl12xx is a driver for TI wl1251 802.11 chipset designed for embedded devices, supporting both SDIO and SPI busses. Currently the driver supports only SPI. Adding support 1253 (the 5 GHz version) should be relatively easy. More information here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?contentId=4711&navigationId=12494&templateId=6123 (Collapsed original sequence of pre-merge patches into single commit for initial merge. -- JWL) Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-18 03:48:05 +0300