summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2023-02-28Merge tag 'net-6.3-rc1' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. The notable fixes here are the EEE fix which restores boot for many embedded platforms (real and QEMU); WiFi warning suppression and the ICE Kconfig cleanup. Current release - regressions: - phy: multiple fixes for EEE rework - wifi: wext: warn about usage only once - wifi: ath11k: allow system suspend to survive ath11k Current release - new code bugs: - mlx5: Fix memory leak in IPsec RoCE creation - ibmvnic: assign XPS map to correct queue index Previous releases - regressions: - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces - netfilter: ctnetlink: make event listener tracking global - nf_tables: allow to fetch set elements when table has an owner - mlx5: - fix skb leak while fifo resync and push - fix possible ptp queue fifo use-after-free Previous releases - always broken: - sched: fix action bind logic - ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also uses a mutex - netfilter: conntrack: fix rmmod double-free race - netfilter: xt_length: use skb len to match in length_mt6, avoid issues with BIG TCP Misc: - ice: remove unnecessary CONFIG_ICE_GNSS - mlx5e: remove hairpin write debugfs files - sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy" * tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) tcp: tcp_check_req() can be called from process context net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard xen-netback: remove unused variables pending_idx and index net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy net: dsa: ocelot_ext: remove unnecessary phylink.h include net: mscc: ocelot: fix duplicate driver name error net: dsa: felix: fix internal MDIO controller resource length net: dsa: seville: ignore mscc-miim read errors from Lynx PCS net/sched: act_sample: fix action bind logic net/sched: act_mpls: fix action bind logic net/sched: act_pedit: fix action bind logic wifi: wext: warn about usage only once wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue qede: avoid uninitialized entries in coal_entry array nfc: fix memory leak of se_io context in nfc_genl_se_io ice: remove unnecessary CONFIG_ICE_GNSS net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy() ibmvnic: Assign XPS map to correct queue index docs: net: fix inaccuracies in msg_zerocopy.rst tools: net: add __pycache__ to gitignore ...
2023-02-27Merge tag 'soc-drivers-6.3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, there are lots of minor driver changes across SoC platforms from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung. These usually add support for additional chip variations in existing drivers, but also add features or bugfixes. The SCMI firmware subsystem gains a unified raw userspace interface through debugfs, which can be used for validation purposes. Newly added drivers include: - New power management drivers for StarFive JH7110, Allwinner D1 and Renesas RZ/V2M - A driver for Qualcomm battery and power supply status - A SoC device driver for identifying Nuvoton WPCM450 chips - A regulator coupler driver for Mediatek MT81xxv" * tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) power: supply: Introduce Qualcomm PMIC GLINK power supply soc: apple: rtkit: Do not copy the reg state structure to the stack soc: sunxi: SUN20I_PPU should depend on PM memory: renesas-rpc-if: Remove redundant division of dummy soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support ...
2023-02-26wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queueLorenzo Bianconi1-0/+1
Fix the following use-after-free issue in mt76u_free_rx_queue routine: usb 3-3.3.4: reset high-speed USB device number 8 using xhci_hcd iwlwifi 0000:05:00.0: Detected RF HR B3, rfid=0x10a100 iwlwifi 0000:05:00.0: base HW address: 50:eb:71:79:02:57 iwlwifi 0000:05:00.0 wlp5s0: renamed from wlan0 mt76x2u 3-3.3.4:1.0: ASIC revision: 76320044 usb 3-3.3.1: 1:3 : unsupported format bits 0x100000000 mt76x2u 3-3.3.4:1.0: could not get hardware semaphore for ROM PATCH ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 13 PID: 983 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 Modules linked in: snd_seq_midi snd_seq_midi_event mt76x2u(+) mt76x2_common mt76x02_usb mt76_usb iwlmvm mt76x02_lib mt76 snd_hda_codec_realtek intel_rapl_msr snd_hda_codec_generic snd_hda_codec_hdmi intel_rapl_common snd_hda_intel mac80211 snd_intel_dspcfg snd_usb_audio(+) snd_intel_sdw_acpi btusb edac_mce_amd snd_hda_codec btrtl btbcm snd_usbmidi_lib snd_hda_core btintel snd_rawmidi btmtk snd_hwdep libarc4 mc iwlwifi kvm_amd snd_seq vfat bluetooth eeepc_wmi asus_ec_sensors snd_seq_device fat kvm cfg80211 asus_wmi snd_pcm irqbypass ledtrig_audio sparse_keymap rapl wmi_bmof platform_profile xpad snd_timer k10temp ff_memless i2c_piix4 rfkill snd joydev soundcore acpi_cpufreq loop zram amdgpu crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic drm_ttm_helper ttm video iommu_v2 ucsi_ccg drm_buddy gpu_sched typec_ucsi ghash_clmulni_intel drm_display_helper igb sha512_ssse3 typec ccp nvme cec sp5100_tco nvme_core dca nvme_common wmi ip6_tables ip_tables fuse BTRFS info (device nvme1n1): enabling ssd optimizations CPU: 13 PID: 983 Comm: (udev-worker) Tainted: G W L ------- --- 6.3.0-0.rc0.20230222git5b7c4cabbb65.3.fc39.x86_64+debug BTRFS info (device nvme1n1): auto enabling async discard Hardware name: System manufacturer System Product Name/ROG STRIX X570-I GAMING, BIOS 4601 02/02/2023 RIP: 0010:refcount_warn_saturate+0xba/0x110 Code: 01 01 e8 69 a6 83 ff 0f 0b e9 52 f4 85 00 80 3d 69 6f ec 01 00 75 85 48 c7 c7 d0 25 b3 a9 c6 05 59 6f ec 01 01 e8 46 a6 83 ff <0f> 0b e9 2f f4 85 00 80 3d 47 6f ec 01 00 0f 85 5e ff ff ff 48 c7 RSP: 0018:ffffb4010456fb78 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000080000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: ffffffffa9b17e3e RDI: 00000000ffffffff RBP: ffff8d15877336c0 R08: 0000000000000000 R09: ffffb4010456fa00 R10: 0000000000000003 R11: ffff8d246e2fffe8 R12: 0000000000000080 R13: ffff8d15b42fd000 R14: 0000000000000000 R15: ffff8d1587736a58 FS: 00007fc05ae34940(0000) GS:ffff8d2425e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055d801f1d540 CR3: 000000011df60000 CR4: 0000000000350ee0 Call Trace: <TASK> mt76u_queues_deinit+0x2a0/0x370 [mt76_usb] mt76x2u_probe+0xf3/0x130 [mt76x2u] usb_probe_interface+0xe8/0x300 really_probe+0x1b6/0x410 __driver_probe_device+0x78/0x170 driver_probe_device+0x1f/0x90 __driver_attach+0xd2/0x1c0 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x8a/0xd0 bus_add_driver+0x141/0x230 driver_register+0x77/0x120 usb_register_driver+0xaf/0x170 ? __pfx_init_module+0x10/0x10 [mt76x2u] do_one_initcall+0x6e/0x350 do_init_module+0x4a/0x220 __do_sys_init_module+0x192/0x1c0 ? lock_is_held_type+0xce/0x120 do_syscall_64+0x5b/0x80 ? lock_is_held_type+0xce/0x120 ? asm_exc_page_fault+0x22/0x30 ? lockdep_hardirqs_on+0x7d/0x100 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fc05b1351be Code: 48 8b 0d 4d 0c 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1a 0c 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffd947c0988 EFLAGS: 00000246 ORIG_RAX: 00000000000000af RAX: ffffffffffffffda RBX: 000055d801f2b090 RCX: 00007fc05b1351be RDX: 00007fc05b65c07d RSI: 00000000000234be RDI: 000055d802c6b170 RBP: 00007ffd947c0a40 R08: 000055d8019b4690 R09: 0000000000022000 R10: 000000055d8019b4 R11: 0000000000000246 R12: 00007fc05b65c07d R13: 0000000000020000 R14: 000055d801f39770 R15: 000055d801f47780 </TASK> irq event stamp: 186313 hardirqs last enabled at (186323): [<ffffffffa81c675e>] __up_console_sem+0x5e/0x70 hardirqs last disabled at (186332): [<ffffffffa81c6743>] __up_console_sem+0x43/0x70 softirqs last enabled at (186022): [<ffffffffa811d2f7>] __irq_exit_rcu+0xd7/0x160 softirqs last disabled at (186017): [<ffffffffa811d2f7>] __irq_exit_rcu+0xd7/0x160 ---[ end trace 0000000000000000 ]--- mt76x2u: probe of 3-3.3.4:1.0 failed with error -110 usbcore: registered new interface driver mt76x2u kauditd_printk_skb: 32 callbacks suppressed Fixes: 2f5c3c77fc9b ("wifi: mt76: switch to page_pool allocator") Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/f2398f68011c976510c81e1964975b677e65860e.1677193208.git.lorenzo@kernel.org
2023-02-25Merge tag 'iommu-updates-v6.3' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Consolidate iommu_map/unmap functions. There have been blocking and atomic variants so far, but that was problematic as this approach does not scale with required new variants which just differ in the GFP flags used. So Jason consolidated this back into single functions that take a GFP parameter. - Retire the detach_dev() call-back in iommu_ops - Arm SMMU updates from Will: - Device-tree binding updates: - Cater for three power domains on SM6375 - Document existing compatible strings for Qualcomm SoCs - Tighten up clocks description for platform-specific compatible strings - Enable Qualcomm workarounds for some additional platforms that need them - Intel VT-d updates from Lu Baolu: - Add Intel IOMMU performance monitoring support - Set No Execute Enable bit in PASID table entry - Two performance optimizations - Fix PASID directory pointer coherency - Fix missed rollbacks in error path - Cleanups - Apple t8110 DART support - Exynos IOMMU: - Implement better fault handling - Error handling fixes - Renesas IPMMU: - Add device tree bindings for r8a779g0 - AMD IOMMU: - Various fixes for handling on SNP-enabled systems and handling of faults with unknown request-ids - Cleanups and other small fixes - Various other smaller fixes and cleanups * tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits) iommu/amd: Skip attach device domain is same as new domain iommu: Attach device group to old domain in error path iommu/vt-d: Allow to use flush-queue when first level is default iommu/vt-d: Fix PASID directory pointer coherency iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode iommu/vt-d: Fix error handling in sva enable/disable paths iommu/amd: Improve page fault error reporting iommu/amd: Do not identity map v2 capable device when snp is enabled iommu: Fix error unwind in iommu_group_alloc() iommu/of: mark an unused function as __maybe_unused iommu: dart: DART_T8110_ERROR range should be 0 to 5 iommu/vt-d: Enable IOMMU perfmon support iommu/vt-d: Add IOMMU perfmon overflow handler support iommu/vt-d: Support cpumask for IOMMU perfmon iommu/vt-d: Add IOMMU perfmon support iommu/vt-d: Support Enhanced Command Interface iommu/vt-d: Retrieve IOMMU perfmon capability information iommu/vt-d: Support size of the register set in DRHD iommu/vt-d: Set No Execute Enable bit in PASID table entry iommu/vt-d: Remove sva from intel_svm_dev ...
2023-02-22wifi: ath11k: allow system suspend to survive ath11kLen Brown1-1/+1
When ath11k runs into internal errors upon suspend, it returns an error code to pci_pm_suspend, which aborts the entire system suspend. The driver should not abort system suspend, but should keep its internal errors to itself, and allow the system to suspend. Otherwise, a user can suspend a laptop by closing the lid and sealing it into a case, assuming that is will suspend, rather than heating up and draining the battery when in transit. In practice, the ath11k device seems to have plenty of transient errors, and subsequent suspend cycles after this failure often succeed. https://bugzilla.kernel.org/show_bug.cgi?id=216968 Fixes: d1b0c33850d29 ("ath11k: implement suspend for QCA6390 PCI devices") Signed-off-by: Len Brown <len.brown@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230201183201.14431-1-len.brown@intel.com
2023-02-22Merge tag 'net-next-6.3' of ↵Linus Torvalds268-2751/+61656
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
2023-02-18Merge branches 'apple/dart', 'arm/exynos', 'arm/renesas', 'arm/smmu', ↵Joerg Roedel2-3/+3
'x86/vt-d', 'x86/amd' and 'core' into next
2023-02-17wifi: rtl8xxxu: add LEDS_CLASS dependencyArnd Bergmann1-0/+1
rtl8xxxu now unconditionally uses LEDS_CLASS, so a Kconfig dependency is required to avoid link errors: aarch64-linux-ld: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.o: in function `rtl8xxxu_disconnect': rtl8xxxu_core.c:(.text+0x730): undefined reference to `led_classdev_unregister' ERROR: modpost: "led_classdev_unregister" [drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko] undefined! ERROR: modpost: "led_classdev_register_ext" [drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko] undefined! Fixes: 3be01622995b ("wifi: rtl8xxxu: Register the LED and make it blink") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230217095910.2480356-1-arnd@kernel.org
2023-02-17wifi: iwlegacy: avoid fortify warningJohannes Berg1-1/+1
There are two different alive messages, the "init" one is bigger than the other one, so we have a fortify read warn here. Avoid it by copying from the variable-sized 'raw' instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230216203444.134310-1-johannes@sipsolutions.net
2023-02-17wifi: iwlwifi: mvm: remove unused iwl_dbgfs_is_match()Johannes Berg1-7/+0
This inline function is unused, remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230216205754.d500dcc2e90c.Id87df297263f86b5bba002f7cbb387abc13adf53@changeid
2023-02-17wifi: rtw89: fix AP mode authentication transmission failedPo-Hao Huang1-21/+26
For some ICs, packets can't be sent correctly without initializing CMAC table first. Previous flow do this initialization after associated, results in authentication response fails to transmit. Move the initialization up front to a proper place to solve this. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230216082807.22285-1-pkshih@realtek.com
2023-02-17wifi: rtw88: use RTW_FLAG_POWERON flag to prevent to power on/off twicePing-Ke Shih5-5/+15
Use power state to decide whether we can enter or leave IPS accurately, and then prevent to power on/off twice. The commit 6bf3a083407b ("wifi: rtw88: add flag check before enter or leave IPS") would like to prevent this as well, but it still can't entirely handle all cases. The exception is that WiFi gets connected and does suspend/resume, it will power on twice and cause it failed to power on after resuming, like: rtw_8723de 0000:03:00.0: failed to poll offset=0x6 mask=0x2 value=0x2 rtw_8723de 0000:03:00.0: mac power on failed rtw_8723de 0000:03:00.0: failed to power on mac rtw_8723de 0000:03:00.0: leave idle state failed rtw_8723de 0000:03:00.0: failed to leave ips state rtw_8723de 0000:03:00.0: failed to leave idle state rtw_8723de 0000:03:00.0: failed to send h2c command To fix this, introduce new flag RTW_FLAG_POWERON to reflect power state, and call rtw_mac_pre_system_cfg() to configure registers properly between power-off/-on. Reported-by: Paul Gover <pmw.gover@yahoo.co.uk> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217016 Fixes: 6bf3a083407b ("wifi: rtw88: add flag check before enter or leave IPS") Cc: <Stable@vger.kernel.org> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230216053633.20366-1-pkshih@realtek.com
2023-02-16wifi: brcmfmac: p2p: Introduce generic flexible array frame memberKees Cook1-2/+2
Silence run-time memcpy() false positive warning when processing management frames: memcpy: detected field-spanning write (size 27) of single field "&mgmt_frame->u" at drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c:1469 (size 26) Due to this (soon to be fixed) GCC bug[1], FORTIFY_SOURCE (via __builtin_dynamic_object_size) doesn't recognize that the union may end with a flexible array, and returns "26" (the fixed size of the union), rather than the remaining size of the allocation. Add an explicit flexible array member and set it as the destination here, so that we get the correct coverage for the memcpy(). [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101832 Reported-by: Ard Biesheuvel <ardb@kernel.org> Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Brian Henriquez <brian.henriquez@cypress.com> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Cc: SHA-cyfmac-dev-list@infineon.com Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230215224110.never.022-kees@kernel.org [rename 'frame' to 'body'] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-15wifi: rtw89: move H2C of del_pkt_offload before polling FW status readyChin-Yen Lee1-2/+2
The H2C of del_pkt_offload must be called before polling FW status ready, otherwise the following downloading normal FW will fail. Fixes: 5c12bb66b79d ("wifi: rtw89: refine packet offload flow") Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230214114314.5268-1-pkshih@realtek.com
2023-02-15wifi: rtw89: use readable return 0 in rtw89_mac_cfg_ppdu_status()Ping-Ke Shih1-3/+3
For normal (successful) flow, it must return 0. The original code uses 'return ret', and then we need to backward reference to initial value to know 'ret = 0'. Changing them to 'return 0', because it will be more readable and intuitive. This patch doesn't change logic at all. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/202302101023.ctlih5q0-lkp@intel.com/ Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230213091328.25481-1-pkshih@realtek.com
2023-02-15wifi: rtw88: usb: drop now unnecessary URB size checkSascha Hauer1-14/+1
Now that we send URBs with the URB_ZERO_PACKET flag set we no longer need to make sure that the URB sizes are not multiple of the bulkout_size. Drop the check. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230210111632.1985205-4-s.hauer@pengutronix.de
2023-02-15wifi: rtw88: usb: send Zero length packets if necessarySascha Hauer1-0/+1
Zero length packets are necessary when sending URBs with size multiple of bulkout_size, otherwise the hardware just stalls. Fixes: a82dfd33d1237 ("wifi: rtw88: Add common USB chip support") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230210111632.1985205-3-s.hauer@pengutronix.de
2023-02-15wifi: rtw88: usb: Set qsel correctlySascha Hauer1-1/+1
We have to extract qsel from the skb before doing skb_push() on it, otherwise qsel will always be 0. Fixes: a82dfd33d1237 ("wifi: rtw88: Add common USB chip support") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230210111632.1985205-2-s.hauer@pengutronix.de
2023-02-14wifi: mac80211: fix receiving A-MSDU frames on mesh interfacesFelix Fietkau1-1/+1
The current mac80211 mesh A-MSDU receive path fails to parse A-MSDU packets on mesh interfaces, because it assumes that the Mesh Control field is always directly after the 802.11 header. 802.11-2020 9.3.2.2.2 Figure 9-70 shows that the Mesh Control field is actually part of the A-MSDU subframe header. This makes more sense, since it allows packets for multiple different destinations to be included in the same A-MSDU, as long as RA and TID are still the same. Another issue is the fact that the A-MSDU subframe length field was apparently accidentally defined as little-endian in the standard. In order to fix this, the mesh forwarding path needs happen at a different point in the receive path. ieee80211_data_to_8023_exthdr is changed to ignore the mesh control field and leave it in after the ethernet header. This also affects the source/dest MAC address fields, which now in the case of mesh point to the mesh SA/DA. ieee80211_amsdu_to_8023s is changed to deal with the endian difference and to add the Mesh Control length to the subframe length, since it's not covered by the MSDU length field. With these changes, the mac80211 will get the same packet structure for converted regular data packets and unpacked A-MSDU subframes. The mesh forwarding checks are now only performed after the A-MSDU decap. For locally received packets, the Mesh Control header is stripped away. For forwarded packets, a new 802.11 header gets added. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-4-nbd@nbd.name [fix fortify build error] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: include puncturing bitmap in channel switch eventsAloka Dixit3-3/+3
Add puncturing bitmap in channel switch notifications and corresponding trace functions. Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20230131001227.25014-4-quic_alokad@quicinc.com [fix qtnfmac] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211_hwsim: Rename pid to portid to avoid confusionJaewan Kim1-3/+3
It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming that hold port identifiers portid instead of pid. This change replicates following commit: commit 15e473046cb6 ("netlink: Rename pid to portid to avoid confusion") Signed-off-by: Jaewan Kim <jaewan@google.com> Link: https://lore.kernel.org/r/20230130022252.1514647-1-jaewan@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: Extend cfg80211_update_owe_info_event() for MLD APVeerendranath Jakkam1-0/+1
Add support to offload OWE processing to user space for MLD AP when driver's SME in use. Add new parameters in struct cfg80211_update_owe_info to provide below information in cfg80211_update_owe_info_event() call: - MLO link ID of the AP, with which station requested (re)association. This is applicable for both MLO and non-MLO station connections when the AP affiliated with an MLD. - Station's MLD address if the connection is MLO capable. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20230126143256.960563-3-quic_vjakkam@quicinc.com [reformat the trace event macro] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-13Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo92-505/+54435
ath.git patches for v6.3. Major changes: ath12k * new driver for Qualcomm Wi-Fi 7 devices ath11k * IPQ5018 support * Fine Timing Measurement (FTM) responder role support * channel 177 support ath10k * store WLAN firmware version in SMEM image table
2023-02-13wifi: zd1211rw: remove redundant declsTom Rix1-3/+0
building with W=2 has these errors redundant redeclaration of ‘zd_rf_generic_patch_6m’ [-Werror=redundant-decls] redundant redeclaration of ‘zd_rf_patch_6m_band_edge’ [-Werror=redundant-decls] Remove the second decls. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230204200902.1709343-1-trix@redhat.com
2023-02-13wifi: rtl8xxxu: fix txdw7 assignment of TX DESC v3Ping-Ke Shih1-1/+1
Type of txdw7 is __le16, so assign __le32 is wrong. Also, the TXDESC_ANTENNA_SELECT_C is defined for __le32, so shift 16 bits to fit the value. Compile test only. sparse warnings: (new ones prefixed by >>) >> rtl8xxxu_core.c:5198:24: sparse: sparse: invalid assignment: |= >> rtl8xxxu_core.c:5198:24: sparse: left side has type restricted __le16 >> rtl8xxxu_core.c:5198:24: sparse: right side has type restricted __le32 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119113146.9640-1-pkshih@realtek.com
2023-02-13wifi: rtl8xxxu: Add LED control code for RTL8723AUBitterblue Smith1-0/+25
By default the LED will blink when there is some activity. This is only compile tested. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/73323811-aa58-a1be-7867-a5d45b7ae3d6@gmail.com
2023-02-13wifi: rtl8xxxu: Add LED control code for RTL8192EUBitterblue Smith2-0/+26
By default the LED will blink when there is some activity. This was tested with a cheap "HT-WR813" from Aliexpress. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/8f7fd5d7-5baa-b38b-ad2a-977dcd9edd81@gmail.com
2023-02-13wifi: rtl8xxxu: Add LED control code for RTL8188EUBitterblue Smith2-0/+29
By default the LED will blink when there is some activity. This was tested with a TP-Link TL-WN725N. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/34d62bf5-3595-0c77-2ca7-be78555f765d@gmail.com
2023-02-13wifi: rtl8xxxu: Register the LED and make it blinkBitterblue Smith2-0/+46
If the chip can have an LED, register a struct led_classdev and enable hardware-controlled blinking. When the chip is not transmitting or receiving anything the LED is off. Otherwise the LED will blink faster or slower according to the throughput. The LED can be controlled from userspace by writing 0, 1, or 2 to /sys/class/leds/rtl8xxxu-usbX-Y/brightness: 0 - solid off. 1 - solid on. 2 - hardware-controlled blinking. In this patch none of the chips advertise having an LED. That will be added in the next patches. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/b8235bca-60c3-d0fe-a958-53c6dd3ba3f6@gmail.com
2023-02-13wifi: rsi: Avoid defines prefixed with CONFIGPeter Lafreniere2-3/+3
Macros prefixed with CONFIG_ are intended to be defined only by Kconfig scripts. Here we remove the prefix from the CONFIG_AUTO_READ_MODE define to avoid confusion when reading the code. This causes no change to functionality. Signed-off-by: Peter Lafreniere <peter@n8pjl.ca> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230118185353.2422-1-peter@n8pjl.ca
2023-02-13wifi: rtw89: phy: set TX power according to RF path number by chipZong-Zhe Yang1-3/+6
Previously, all supported chips had two RF paths. Therefore, these codes used static number for TX power setting. Now, we are planning to support a new chip which has only one RF path. So, we refine the setting codes to refer to chip's RF path number at runtime. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230203065157.8227-1-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852b: correct register mask name of TX power offsetPing-Ke Shih1-1/+1
For a packet with 1SS rate, it can also transmit via 2 antenna, called 2T mode. For 2T TX power offset, mask should be 2T as well. Fortunately, the mask of 2T and 1T are the same, so it can still work well without this fix. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230203064907.8046-1-pkshih@realtek.com
2023-02-13wifi: rtw89: use passed channel in set_tx_shape_dfir()Zong-Zhe Yang2-4/+4
In path of setting channel and setting TX power, the rtw89_chan instance to be used is controlled by top and passed down. The set_tx_shape_dfir() is in path of setting TX power, so it should use the passed rtw89_chan instead of querying it itself. Otherwise, it might encounter mismatch between parameters if multi-channel. For example, rtw89_8852ce 0000:04:00.0: set tx shape dfir by unknown ch: 155 on 2GHz Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230201032057.7349-1-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852be: enable CLKREQ of PCI capabilityChin-Yen Lee1-1/+1
Enable CLKREQ to reduce power consumption for 8852BE. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230126112715.5811-1-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852b: try to use NORMAL_CE type firmware firstPing-Ke Shih5-6/+21
New firmware type NORMAL_CE is introduced to support P2P-PS and hardware scan, but no LPS-PG mode. After this patch, old firmware with NORMAL type can still work well. The use of this new type is the same as before, so we add new type to avoid taking wrong firmware. Then, driver log can also give clear information about this change: rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5 rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-7-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852b: don't support LPS-PG mode after firmware 0.29.26.0Ping-Ke Shih3-2/+6
Due to firmware size limit of 8852b, LPS-PG mode isn't supported after 0.29.26.0, and then we have more space to support other features, such as P2P-PS, hardware scan and so on. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-6-pkshih@realtek.com
2023-02-13wifi: rtw89: 8852b: reset IDMEM mode to default valuePing-Ke Shih2-0/+8
For different firmware type, it could use different IDMEM mode, so reset it to default to avoid encountering error during we bisect firmware version, like rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5 rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3 rtw89_8852be 0000:03:00.0: fw security fail rtw89_8852be 0000:03:00.0: download firmware fail rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x1E0 = 0x62 rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x83F2 = 0x8 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931150 rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-5-pkshih@realtek.com
2023-02-13wifi: rtw89: add use of pkt_list offload to debug entryPing-Ke Shih1-0/+36
Driver can prepare pkt_list for firmware that only uses them to send out the packets in specific situations. To understand the usage of current status, and to check if there is leakage problem, dump bitmap and the indices used by certain function. An example looks like: map: ... pkt_ofld: 3f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ... [SCAN 0]: 3 [SCAN 1]: 4 [SCAN 3]: 5 VIF [0] xx:xx:xx:xx:xx:xx ... pkt_ofld[GENERAL]: 0 1 2 Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-4-pkshih@realtek.com
2023-02-13wifi: rtw89: refine packet offload flowChin-Yen Lee7-36/+71
For upcoming firmware, driver needs to do packet offload to firmware to ensure LPS protocol work properly, so we update current connection and disconnect flow to maintain packet offload flow, and integrate with current WoWLAN flow which also needs packet offload. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-3-pkshih@realtek.com
2023-02-13wifi: rtw89: fix potential wrong mapping for pkt-offloadChin-Yen Lee1-3/+6
When driver fails to send H2C to firmware for pkt-offload, we should not update the pkt_list of driver, and need to release allocated pkt index to avoid wrong mapping between driver and firmware. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230123065401.14174-2-pkshih@realtek.com
2023-02-13wifi: rtw89: disallow enter PS mode after create TDLS linkKuan-Chung Chen2-2/+9
Buffer STA on TDLS links are not currently supported. Therefore, it is not allowed to enter the PS mode after TDLS link is established. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119064631.66971-1-pkshih@realtek.com
2023-02-13wifi: rtw89: refine MCC C2H debug logsZong-Zhe Yang2-8/+14
To debug channel concurrency more centrally, we add a new debug flag, RTW89_DBG_CHAN, for channel related things, especially channel concurrency. Then, we change MCC (multi-channel concurrency) C2H (chip to host packets) debug flag to it. Besides, refine debug logs to show TSF in u64 directly. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119064342.65391-2-pkshih@realtek.com
2023-02-13wifi: rtw89: fix parsing offset for MCC C2HZong-Zhe Yang1-17/+17
A 8-byte offset is missed during parsing C2Hs (chip to host packets) of MCC (multi-channel concurrent) series. So, we fix it. Fixes: ef9dff4cb491 ("wifi: rtw89: mac: process MCC related C2H") Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119064342.65391-1-pkshih@realtek.com
2023-02-13wifi: rtw89: deal with RXI300 errorZong-Zhe Yang2-1/+6
RXI300 is a HW design to maintain stuffs across BUS, e.g. AXI, AHB, APB. It will feedback an error when host does an invalid BUS operation. For example, * BUS master request without power/clock on. * host reads/writes/accesses an invalid address. They might lead to problems such as BUS timeout, platform hang, etc. So, once if RXI300 feedback an error, it notifies that driver need a L2 SER (system error recovery) to reset things. Previously, driver did not parse the error scenario for RXI300. We add it and assign a corresponding error code which will make SER flow do L2 reset. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119063529.61563-3-pkshih@realtek.com
2023-02-13wifi: rtw89: debug: avoid invalid access on RTW89_DBG_SEL_MAC_30Zong-Zhe Yang1-0/+7
Only 8852C chip has valid pages on RTW89_DBG_SEL_MAC_30. To other chips, this section is an address hole. It will lead to crash if trying to access this section on chips except for 8852C. So, we avoid that. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119063529.61563-2-pkshih@realtek.com
2023-02-13wifi: rtw89: mac: add function to get TSFZong-Zhe Yang2-0/+29
Add mac function rtw89_mac_port_get_tsf() to get TSF by port. It will be used when MCC (multi-channel concurrency) calculates timing things. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119062453.58341-4-pkshih@realtek.com
2023-02-13wifi: rtw89: split out generic part of rtw89_mac_port_tsf_sync()Zong-Zhe Yang2-12/+25
Originally, rtw89_mac_port_tsf_sync() contains randomization logic internally. However, not all situation, we need the randomization. So, split out the generic part from it. And, make the full logic of original one contained in rtw89_mac_port_tsf_sync_rand(). It will still be used by its original caller as before. Then, the generic one will be used in MCC (multi-channel concurrency) management flow. MCC will implement its logic to decide the offset for TSF sync. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119062453.58341-3-pkshih@realtek.com
2023-02-13wifi: rtw89: correct unit for port offset and refine macroZong-Zhe Yang2-2/+4
Strictly speaking, the unit of the offset should be TU instead of ms. So, correct it and the macro for calculation. Then, to make the macro generic, the factor n is moved outside. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230119062453.58341-2-pkshih@realtek.com
2023-02-13wifi: rtw89: coex: Update Wi-Fi Bluetooth coexistence version to 7.0.0Ching-Te Ku1-1/+1
Should update the driver with the supported firmware version of the below item. Bluetooth firmware BT_Coex_Ver: 0x07 Wi-Fi firmware version: RTL8852C->v0.27.56.10, RTL8852A->v0.24.36 Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230117114109.4298-9-pkshih@realtek.com
2023-02-13wifi: rtw89: coex: Fix test fail when coexist with raspberryPI A2DP idleChing-Te Ku1-1/+1
The origin code will enable TDMA WL:BT = 50:50 to prevent Wi-Fi throughput suddenly drop to 0 in the moment while A2DP pause. And this protection just a short moment, and will turn to Bluetooth idle case when A2DP turn into sniff mode. But the raspberryPI simulated A2DP device will not turn into sniff mode. So the protection will bring the throughput drop. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230117114109.4298-8-pkshih@realtek.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-16 02:00:23 +0300