Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit 65277100caa2f2c62b6f3c4648b90d6f0435f3bc ]
In case RSI9116 SDIO WiFi operates in STA mode against Intel 9260 in AP mode,
the association fails. The former is using wpa_supplicant during association,
the later is set up using hostapd:
iwl$ cat hostapd.conf
interface=wlp1s0
ssid=test
country_code=DE
hw_mode=g
channel=1
wpa=2
wpa_passphrase=test
wpa_key_mgmt=WPA-PSK
iwl$ hostapd -d hostapd.conf
rsi$ wpa_supplicant -i wlan0 -c <(wpa_passphrase test test)
The problem is that the TX EAPOL data descriptor RSI_DESC_REQUIRE_CFM_TO_HOST
flag and extended descriptor EAPOL4_CONFIRM frame type are not set in case the
AP is iwlwifi, because in that case the TX EAPOL packet is 2 bytes shorter.
The downstream vendor driver has this change in place already [1], however
there is no explanation for it, neither is there any commit history from which
such explanation could be obtained.
[1] https://github.com/SiliconLabs/RS911X-nLink-OSD/blob/master/rsi/rsi_91x_hal.c#L238
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201015111616.429220-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4773acf3d4b50768bf08e9e97a204819e9ea0895 ]
The documentation for the PHY update [1] states:
Loop 4 times with index i
If PHY Revision >= 3
Copy table[i] to coef[i]
Otherwise
Set coef[i] to 0
the copy of the table to coef is currently implemented the wrong way
around, table is being updated from uninitialized values in coeff.
Fix this by swapping the assignment around.
[1] https://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal/
Fixes: 2f258b74d13c ("b43: N-PHY: implement restoring general configuration")
Addresses-Coverity: ("Uninitialized scalar variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 12c8f3d1cdd84f01ee777b756db9dddc1f1c9d17 ]
When trying to set the noise floor via debugfs, a "data bus error"
crash like the following can happen:
[ 88.433133] Data bus error, epc == 80221c28, ra == 83314e60
[ 88.438895] Oops[#1]:
[ 88.441246] CPU: 0 PID: 7263 Comm: sh Not tainted 4.14.195 #0
[ 88.447174] task: 838a1c20 task.stack: 82d5e000
[ 88.451847] $ 0 : 00000000 00000030 deadc0de 83141de4
[ 88.457248] $ 4 : b810a2c4 0000a2c4 83230fd4 00000000
[ 88.462652] $ 8 : 0000000a 00000000 00000001 00000000
[ 88.468055] $12 : 7f8ef318 00000000 00000000 77f802a0
[ 88.473457] $16 : 83230080 00000002 0000001b 83230080
[ 88.478861] $20 : 83a1c3f8 00841000 77f7adb0 ffffff92
[ 88.484263] $24 : 00000fa4 77edd860
[ 88.489665] $28 : 82d5e000 82d5fda8 00000000 83314e60
[ 88.495070] Hi : 00000000
[ 88.498044] Lo : 00000000
[ 88.501040] epc : 80221c28 ioread32+0x8/0x10
[ 88.505671] ra : 83314e60 ath9k_hw_loadnf+0x88/0x520 [ath9k_hw]
[ 88.512049] Status: 1000fc03 KERNEL EXL IE
[ 88.516369] Cause : 5080801c (ExcCode 07)
[ 88.520508] PrId : 00019374 (MIPS 24Kc)
[ 88.524556] Modules linked in: ath9k ath9k_common pppoe ppp_async l2tp_ppp cdc_mbim batman_adv ath9k_hw ath sr9700 smsc95xx sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_conntrack_ipv6 mcs7830 mac80211 kalmia iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm ftdi_sio dm9601 cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbserial usbnet usbhid slhc rtl8150 r8152 pegasus nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack
[ 88.597894] libcrc32c kaweth iptable_mangle iptable_filter ipt_ECN ipheth ip_tables hso hid_generic crc_ccitt compat cdc_wdm cdc_acm br_netfilter hid evdev input_core nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_beet ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel xfrm4_mode_tunnel xfrm4_mode_transport xfrm4_mode_beet ipcomp esp4 ah4 tunnel6 tunnel4 tun xfrm_user xfrm_ipcomp af_key xfrm_algo sha256_generic sha1_generic jitterentropy_rng drbg md5 hmac echainiv des_generic deflate zlib_inflate zlib_deflate cbc authenc crypto_acompress ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16 mii aead crypto_null cryptomgr crc32c_generic
[ 88.671671] crypto_hash
[ 88.674292] Process sh (pid: 7263, threadinfo=82d5e000, task=838a1c20, tls=77f81efc)
[ 88.682279] Stack : 00008060 00000008 00000200 00000000 00000000 00000000 00000000 00000002
[ 88.690916] 80500000 83230080 82d5fe22 00841000 77f7adb0 00000000 00000000 83156858
[ 88.699553] 00000000 8352fa00 83ad62b0 835302a8 00000000 300a00f8 00000003 82d5fe38
[ 88.708190] 82d5fef4 00000001 77f54dc4 77f80000 77f7adb0 c79fe901 00000000 00000000
[ 88.716828] 80510000 00000002 00841000 77f54dc4 77f80000 801ce4cc 0000000b 41824292
[ 88.725465] ...
[ 88.727994] Call Trace:
[ 88.730532] [<80221c28>] ioread32+0x8/0x10
[ 88.734765] Code: 00000000 8c820000 0000000f <03e00008> 00000000 08088708 00000000 aca40000 03e00008
[ 88.744846]
[ 88.746464] ---[ end trace db226b2de1b69b9e ]---
[ 88.753477] Kernel panic - not syncing: Fatal exception
[ 88.759981] Rebooting in 3 seconds..
The "REG_READ(ah, AR_PHY_AGC_CONTROL)" in ath9k_hw_loadnf() does not
like being called when the hardware is asleep, leading to this crash.
The easiest way to reproduce this is trying to set nf_override while
the hardware is down:
$ ip link set down dev wlan0
$ echo "-85" > /sys/kernel/debug/ieee80211/phy0/ath9k/nf_override
Fixing this crash by waking the hardware up before trying to set the
noise floor. Similar to what other ath9k debugfs files do.
Tested on a Lima board from 8devices, which has a QCA 4531 chipset.
Fixes: b90189759a7f ("ath9k: add noise floor override option")
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210209184352.4272-1-linus.luessing@c0d3.blue
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 31561e8557cd1eeba5806ac9ce820f8323b2201b ]
Currently if the copy engine pipe init fails for snoc based
chipsets, the rri is not freed.
Fix this error handling for copy engine pipe init
failure.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1
Fixes: 4945af5b264f ("ath10k: enable SRRI/DRRI support on ddr for WCN3990")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1607713210-18320-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 93a1d4791c10d443bc67044def7efee2991d48b7 ]
Fix a memory leak in mt76_add_fragment routine returning the buffer
to the page_frag_cache when we receive a new fragment and the
skb_shared_info frag array is full.
Fixes: b102f0c522cf6 ("mt76: fix array overflow on receiving too many fragments for a packet")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/4f9dd73407da88b2a552517ce8db242d86bf4d5c.1611616130.git.lorenzo@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7a21b1d4a728a483f07c638ccd8610d4b4f12684 ]
If we get into a problem severe enough to attempt a reprobe,
we schedule a worker to do that. However, if the problem gets
more severe and the device is actually destroyed before this
worker has a chance to run, we use a free device. Bump up the
reference count of the device until the worker runs to avoid
this situation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.871f0892e4b2.I94819e11afd68d875f3e242b98bef724b8236f1e@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d6bc752cc2806366d9a4fd577b3f6c1f7a7e04e ]
If the image loader allocation fails, we leak all the previously
allocated memory. Fix this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.97172cbaa67c.I3473233d0ad01a71aa9400832fb2b9f494d88a11@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 98c7d21f957b10d9c07a3a60a3a5a8f326a197e5 ]
I hit a NULL pointer exception in this function when the
init flow went really bad.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.2e8da9f2c132.I0234d4b8ddaf70aaa5028a20c863255e05bc1f84@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5c56d862c749669d45c256f581eac4244be00d4d ]
We need to take the mutex to call iwl_mvm_get_sync_time(), do it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.4bb5ccf881a6.I62973cbb081e80aa5b0447a5c3b9c3251a65cf6b@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3d372c4edfd4dffb7dea71c6b096fb414782b776 ]
If we spin for a long time in memory reads that (for some reason in
hardware) take a long time, then we'll eventually get messages such
as
watchdog: BUG: soft lockup - CPU#2 stuck for 24s! [kworker/2:2:272]
This is because the reading really does take a very long time, and
we don't schedule, so we're hogging the CPU with this task, at least
if CONFIG_PREEMPT is not set, e.g. with CONFIG_PREEMPT_VOLUNTARY=y.
Previously I misinterpreted the situation and thought that this was
only going to happen if we had interrupts disabled, and then fixed
this (which is good anyway, however), but that didn't always help;
looking at it again now I realized that the spin unlock will only
reschedule if CONFIG_PREEMPT is used.
In order to avoid this issue, change the code to cond_resched() if
we've been spinning for too long here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 04516706bb99 ("iwlwifi: pcie: limit memory read spin time")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130253.217a9d6a6a12.If964cb582ab0aaa94e81c4ff3b279eaafda0fd3f@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6701317476bbfb1f341aa935ddf75eb73af784f9 ]
There's no reason to use ktime_get() since we don't need any better
precision than jiffies, and since we no longer disable interrupts
around this code (when grabbing NIC access), jiffies will work fine.
Use jiffies instead of ktime_get().
This cleanup is preparation for the following patch "iwlwifi: pcie: reschedule
in long-running memory reads". The code gets simpler with the weird clock use
etc. removed before we add cond_resched().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130253.621c948b1fad.I3ee9f4bc4e74a0c9125d42fb7c35cd80df4698a1@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d24c790577ef01bfa01da2b131313a38c843a634 upstream.
Fix the following crash due to erroneous page refcounting:
[ 32.445919] BUG: Bad page state in process swapper/1 pfn:11f65a
[ 32.447409] page:00000000938f0632 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x11f65a
[ 32.449605] flags: 0x8000000000000000()
[ 32.450421] raw: 8000000000000000 ffffffff825b0148 ffffea00045ae988 0000000000000000
[ 32.451795] raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000
[ 32.452999] page dumped because: nonzero mapcount
[ 32.453888] Modules linked in:
[ 32.454492] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-rc2+ #1976
[ 32.455695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014
[ 32.457157] Call Trace:
[ 32.457636] <IRQ>
[ 32.457993] dump_stack+0x77/0x97
[ 32.458576] bad_page.cold+0x65/0x96
[ 32.459198] get_page_from_freelist+0x46a/0x11f0
[ 32.460008] __alloc_pages_nodemask+0x10a/0x2b0
[ 32.460794] mt7601u_rx_tasklet+0x651/0x720
[ 32.461505] tasklet_action_common.constprop.0+0x6b/0xd0
[ 32.462343] __do_softirq+0x152/0x46c
[ 32.462928] asm_call_irq_on_stack+0x12/0x20
[ 32.463610] </IRQ>
[ 32.463953] do_softirq_own_stack+0x5b/0x70
[ 32.464582] irq_exit_rcu+0x9f/0xe0
[ 32.465028] common_interrupt+0xae/0x1a0
[ 32.465536] asm_common_interrupt+0x1e/0x40
[ 32.466071] RIP: 0010:default_idle+0x18/0x20
[ 32.468981] RSP: 0018:ffffc90000077f00 EFLAGS: 00000246
[ 32.469648] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[ 32.470550] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81aac3dd
[ 32.471463] RBP: ffff88810022ab00 R08: 0000000000000001 R09: 0000000000000001
[ 32.472335] R10: 0000000000000046 R11: 0000000000005aa0 R12: 0000000000000000
[ 32.473235] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 32.474139] ? default_idle_call+0x4d/0x200
[ 32.474681] default_idle_call+0x74/0x200
[ 32.475192] do_idle+0x1d5/0x250
[ 32.475612] cpu_startup_entry+0x19/0x20
[ 32.476114] secondary_startup_64_no_verify+0xb0/0xbb
[ 32.476765] Disabling lock debugging due to kernel taint
Fixes: c869f77d6abb ("add mt7601u driver")
Co-developed-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/62b2380c8c2091834cfad05e1059b55f945bd114.1610643952.git.lorenzo@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0acb20a5438c36e0cf2b8bf255f314b59fcca6ef upstream.
The following crash log can occur unplugging the usb dongle since,
after the urb poison in mt7601u_free_tx_queue(), usb_submit_urb() will
always fail resulting in a skb kfree while the skb has been already
queued.
Fix the issue enqueuing the skb only if usb_submit_urb() succeed.
Hardware name: Hewlett-Packard 500-539ng/2B2C, BIOS 80.06 04/01/2015
Workqueue: usb_hub_wq hub_event
RIP: 0010:skb_trim+0x2c/0x30
RSP: 0000:ffffb4c88005bba8 EFLAGS: 00010206
RAX: 000000004ad483ee RBX: ffff9a236625dee0 RCX: 000000000000662f
RDX: 000000000000000c RSI: 0000000000000000 RDI: ffff9a2343179300
RBP: ffff9a2343179300 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9a23748f7840 R11: 0000000000000001 R12: ffff9a236625e4d4
R13: ffff9a236625dee0 R14: 0000000000001080 R15: 0000000000000008
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd410a34ef8 CR3: 00000001416ee001 CR4: 00000000001706f0
Call Trace:
mt7601u_tx_status+0x3e/0xa0 [mt7601u]
mt7601u_dma_cleanup+0xca/0x110 [mt7601u]
mt7601u_cleanup+0x22/0x30 [mt7601u]
mt7601u_disconnect+0x22/0x60 [mt7601u]
usb_unbind_interface+0x8a/0x270
? kernfs_find_ns+0x35/0xd0
__device_release_driver+0x17a/0x230
device_release_driver+0x24/0x30
bus_remove_device+0xdb/0x140
device_del+0x18b/0x430
? kobject_put+0x98/0x1d0
usb_disable_device+0xc6/0x1f0
usb_disconnect.cold+0x7e/0x20a
hub_event+0xbf3/0x1870
process_one_work+0x1b6/0x350
worker_thread+0x53/0x3e0
? process_one_work+0x350/0x350
kthread+0x11b/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
Fixes: 23377c200b2eb ("mt7601u: fix possible memory leak when the device is disconnected")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/3b85219f669a63a8ced1f43686de05915a580489.1610919247.git.lorenzo@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e186620d7bf11b274b985b839c38266d7918cc05 upstream.
Without crc32, the driver fails to link:
arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify':
fw.c:(.text+0x74c): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow
Fixes: 151a9706503f ("wil6210: firmware download")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5c455c5ab332773464d02ba17015acdca198f03d ]
mwifiex_cmd_802_11_ad_hoc_start() calls memcpy() without checking
the destination size may trigger a buffer overflower,
which a local user could use to cause denial of service
or the execution of arbitrary code.
Fix it by putting the length check before calling memcpy().
Signed-off-by: Zhang Xiaohui <ruc_zhangxiaohui@163.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201206084801.26479-1-ruc_zhangxiaohui@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6364e693f4a7a89a2fb3dd2cbd6cc06d5fd6e26d ]
Should an error occur after calling 'ath10k_usb_create()', it should be
undone by a corresponding 'ath10k_usb_destroy()' call
Fixes: 4db66499df91 ("ath10k: add initial USB support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201122170358.1346065-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed3573bc3943c27d2d8e405a242f87ed14572ca1 ]
If 'ath10k_usb_create()' fails, we should release some resources and report
an error instead of silently continuing.
Fixes: 4db66499df91 ("ath10k: add initial USB support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201122170342.1346011-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c7cee9c0f499f27ec6de06bea664b61320534768 ]
The wmi service available event has been
extended to contain extra 128 bit for new services
to be indicated by firmware.
Currently the presence of any optional TLVs in
the wmi service available event leads to a parsing
error with the below error message:
ath10k_snoc 18800000.wifi: failed to parse svc_avail tlv: -71
The wmi service available event parsing should
not return error for the newly added optional TLV.
Fix this parsing for service available event message.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2-00720-QCAHLSWMTPL-1
Fixes: cea19a6ce8bf ("ath10k: add WMI_SERVICE_AVAILABLE_EVENT support")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1605501291-23040-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ec8a926188eb8e7a3cbaca43ec44f2d7146d71b ]
Add the missing destroy_workqueue() before return from
cw1200_init_common in the error handling case.
Fixes: a910e4a94f69 ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201119070842.1011-1-miaoqinglang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a31eb615646a63370aa1da1053c45439c7653d83 ]
ezusb_xmit() allocates a context which is leaked if
orinoco_process_xmit_skb() returns an error.
Move ezusb_alloc_ctx() after the invocation of
orinoco_process_xmit_skb() because the context is not needed so early.
ezusb_access_ltv() will cleanup the context in case of an error.
Fixes: bac6fafd4d6a0 ("orinoco: refactor xmit path")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-2-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fa74cb1dc0f4da46c441b735ca865ac52de42c0e ]
When a PCIe function level reset (FLR) is performed but without fw reset for
some reasons (e.g., on Microsoft Surface devices, fw reset requires other
quirks), it fails to reset wifi properly. You can trigger the issue on such
devices via debugfs entry for reset:
$ echo 1 | sudo tee /sys/kernel/debug/mwifiex/mlan0/reset
and the resulting dmesg log:
[ 45.740508] mwifiex_pcie 0000:03:00.0: Resetting per request
[ 45.742937] mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 3
[ 45.744666] mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex...
[ 45.751530] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.751539] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.771691] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.771695] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 45.771697] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.771698] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 45.771699] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.771701] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 45.771702] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.771703] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 45.771704] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.771705] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 45.771707] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed
[ 45.771708] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 53.099343] mwifiex_pcie 0000:03:00.0: info: trying to associate to '[SSID]' bssid [BSSID]
[ 53.241870] mwifiex_pcie 0000:03:00.0: info: associated to bssid [BSSID] successfully
[ 75.377942] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
[ 85.385491] mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 15
[ 87.539408] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
[ 87.539412] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 99.699917] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
[ 99.699925] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[ 111.859802] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110
[ 111.859808] mwifiex_pcie 0000:03:00.0: deleting the crypto keys
[...]
When comparing mwifiex_shutdown_sw() with mwifiex_pcie_remove(), it
lacks mwifiex_init_shutdown_fw().
This commit fixes mwifiex_shutdown_sw() by adding the missing
mwifiex_init_shutdown_fw().
Fixes: 4c5dae59d2e9 ("mwifiex: add PCIe function level reset support")
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201028142110.18144-2-kitakar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fe56d05ee6c87f6a1a8c7267affd92c9438249cc ]
During CSA, we briefly nullify the phy context, in __iwl_mvm_unassign_vif_chanctx.
In case we have a FW assert right after it, it remains NULL though.
We end up running into endless loop due to mac80211 trying repeatedly to
move us to ASSOC state, and we keep returning -EINVAL. Later down the road
we hit a kernel panic.
Detect and avoid this endless loop.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201107104557.d64de2c17bff.Iedd0d2afa20a2aacba5259a5cae31cb3a119a4eb@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 04516706bb99889986ddfa3a769ed50d2dc7ac13 ]
When we read device memory, we lock a spinlock, write the address we
want to read from the device and then spin in a loop reading the data
in 32-bit quantities from another register.
As the description makes clear, this is rather inefficient, incurring
a PCIe bus transaction for every read. In a typical device today, we
want to read 786k SMEM if it crashes, leading to 192k register reads.
Occasionally, we've seen the whole loop take over 20 seconds and then
triggering the soft lockup detector.
Clearly, it is unreasonable to spin here for such extended periods of
time.
To fix this, break the loop down into an outer and an inner loop, and
break out of the inner loop if more than half a second elapsed. To
avoid too much overhead, check for that only every 128 reads, though
there's no particular reason for that number. Then, unlock and relock
to obtain NIC access again, reprogram the start address and continue.
This will keep (interrupt) latencies on the CPU down to a reasonable
time.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20201022165103.45878a7e49aa.I3b9b9c5a10002915072312ce75b68ed5b3dc6e14@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5024f21c159f8c1668f581fff37140741c0b1ba9 upstream.
kernel test robot says:
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: warning: incorrect type in assignment (different base types)
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: expected restricted __be16 [usertype] rs_datalen
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: got unsigned short [usertype]
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:988:13: sparse: warning: restricted __be16 degrades to integer
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:1001:13: sparse: warning: restricted __be16 degrades to integer
Indeed rs_datalen has host byte order, so modify it's own type.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: cd486e627e67 ("ath9k_htc: Discard undersized packets")
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200808233258.4596-1-masashi.honma@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 99f41b8e43b8b4b31262adb8ac3e69088fff1289 ]
When STBC is enabled, NSTS_SU value need to be accounted for VHT NSS
calculation for SU case.
Without this fix, 1SS + STBC enabled case was reported wrongly as 2SS
in radiotap header on monitor mode capture.
Tested-on: QCA9984 10.4-3.10-00047
Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597392971-3897-1-git-send-email-murugana@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
for sdio
[ Upstream commit 2fd3c8f34d08af0a6236085f9961866ad92ef9ec ]
When simulate random transfer fail for sdio write and read, it happened
"payload length exceeds max htc length" and recovery later sometimes.
Test steps:
1. Add config and update kernel:
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
2. Run simulate fail:
cd /sys/kernel/debug/mmc1/fail_mmc_request
echo 10 > probability
echo 10 > times # repeat until hitting issues
3. It happened payload length exceeds max htc length.
[ 199.935506] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088
....
[ 264.990191] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088
4. after some time, such as 60 seconds, it start recovery which triggered
by wmi command timeout for periodic scan.
[ 269.229232] ieee80211 phy0: Hardware restart was requested
[ 269.734693] ath10k_sdio mmc1:0001:1: device successfully recovered
The simulate fail of sdio is not a real sdio transter fail, it only
set an error status in mmc_should_fail_request after the transfer end,
actually the transfer is success, then sdio_io_rw_ext_helper will
return error status and stop transfer the left data. For example,
the really RX len is 286 bytes, then it will split to 2 blocks in
sdio_io_rw_ext_helper, one is 256 bytes, left is 30 bytes, if the
first 256 bytes get an error status by mmc_should_fail_request,then
the left 30 bytes will not read in this RX operation. Then when the
next RX arrive, the left 30 bytes will be considered as the header
of the read, the top 4 bytes of the 30 bytes will be considered as
lookaheads, but actually the 4 bytes is not the lookaheads, so the len
from this lookaheads is not correct, it exceeds max htc length 4088
sometimes. When happened exceeds, the buffer chain is not matched between
firmware and ath10k, then it need to start recovery ASAP. Recently then
recovery will be started by wmi command timeout, but it will be long time
later, for example, it is 60+ seconds later from the periodic scan, if
it does not have periodic scan, it will be longer.
Start recovery when it happened "payload length exceeds max htc length"
will be reasonable.
This patch only effect sdio chips.
Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200108031957.22308-3-wgong@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 478762855b5ae9f68fa6ead1edf7abada70fcd5f upstream.
In p54p_tx(), skb->data is mapped to streaming DMA on line 337:
mapping = pci_map_single(..., skb->data, ...);
Then skb->data is accessed on line 349:
desc->device_addr = ((struct p54_hdr *)skb->data)->req_id;
This access may cause data inconsistency between CPU cache and hardware.
To fix this problem, ((struct p54_hdr *)skb->data)->req_id is stored in
a local variable before DMA mapping, and then the driver accesses this
local variable instead of skb->data.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200802132949.26788-1-baijiaju@tsinghua.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bad60b8d1a7194df38fd7fe4b22f3f4dcf775099 ]
The idx in __ath10k_htt_rx_ring_fill_n function lives in
consistent dma region writable by the device. Malfunctional
or malicious device could manipulate such idx to have a OOB
write. Either by
htt->rx_ring.netbufs_ring[idx] = skb;
or by
ath10k_htt_set_paddrs_ring(htt, paddr, idx);
The idx can also be negative as it's signed, giving a large
memory space to write to.
It's possibly exploitable by corruptting a legit pointer with
a skb pointer. And then fill skb with payload as rougue object.
Part of the log here. Sometimes it appears as UAF when writing
to a freed memory by chance.
[ 15.594376] BUG: unable to handle page fault for address: ffff887f5c1804f0
[ 15.595483] #PF: supervisor write access in kernel mode
[ 15.596250] #PF: error_code(0x0002) - not-present page
[ 15.597013] PGD 0 P4D 0
[ 15.597395] Oops: 0002 [#1] SMP KASAN PTI
[ 15.597967] CPU: 0 PID: 82 Comm: kworker/u2:2 Not tainted 5.6.0 #69
[ 15.598843] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 15.600438] Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core]
[ 15.601389] RIP: 0010:__ath10k_htt_rx_ring_fill_n
(linux/drivers/net/wireless/ath/ath10k/htt_rx.c:173) ath10k_core
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200623221105.3486-1-bruceshenzk@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c151410d5b57e6bb0d91a735ac511459539a7bf ]
When brcmf_proto_msgbuf_attach fail and msgbuf->txflow_wq != NULL,
we should destroy the workqueue.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1595237765-66238-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 621a3a8b1c0ecf16e1e5667ea5756a76a082b738 ]
syzbot is reporting that del_timer_sync() is called from
mwifiex_usb_cleanup_tx_aggr() from mwifiex_unregister_dev() without
checking timer_setup() from mwifiex_usb_tx_init() was called [1].
Ganapathi Bhat proposed a possibly cleaner fix, but it seems that
that fix was forgotten [2].
"grep -FrB1 'del_timer' drivers/ | grep -FA1 '.function)'" says that
currently there are 28 locations which call del_timer[_sync]() only if
that timer's function field was initialized (because timer_setup() sets
that timer's function field). Therefore, let's use same approach here.
[1] https://syzkaller.appspot.com/bug?id=26525f643f454dd7be0078423e3cdb0d57744959
[2] https://lkml.kernel.org/r/CA+ASDXMHt2gq9Hy+iP_BYkWXsSreWdp3_bAfMkNcuqJ3K+-jbQ@mail.gmail.com
Reported-by: syzbot <syzbot+dc4127f950da51639216@syzkaller.appspotmail.com>
Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200821082720.7716-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 86279456a4d47782398d3cb8193f78f672e36cac ]
Free the skb if usb_submit_urb fails on rx_urb. And free the urb
no matter usb_submit_urb succeeds or not in rtl8xxxu_submit_int_urb.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200906040424.22022-1-chiu@endlessm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f4443293d741d1776b86ed1dd8c4e4285d0775fc ]
When wlc_phy_txpwr_srom_read_lcnphy fails in wlc_phy_attach_lcnphy,
the allocated pi->u.pi_lcnphy is leaked, since struct brcms_phy will be
freed in the caller function.
Fix this by calling wlc_phy_detach_lcnphy in the error handler of
wlc_phy_txpwr_srom_read_lcnphy before returning.
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200908121743.23108-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
usb_kill_anchored_urbs()
[ Upstream commit 03fb92a432ea5abe5909bca1455b7e44a9380480 ]
Calls to usb_kill_anchored_urbs() after usb_kill_urb() on multiprocessor
systems create a race condition in which usb_kill_anchored_urbs() deallocates
the URB before the completer callback is called in usb_kill_urb(), resulting
in a use-after-free.
To fix this, add proper lock protection to usb_kill_urb() calls that can
possibly run concurrently with usb_kill_anchored_urbs().
Reported-by: syzbot+89bd486af9427a9fc605@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=cabffad18eb74197f84871802fd2c5117b61febf
Signed-off-by: Brooke Basile <brookebasile@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200911071427.32354-1-brookebasile@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 53708f4fd9cfe389beab5c8daa763bcd0e0b4aef ]
clang static analysis reports this problem:
sdio.c:2403:3: warning: Attempt to free released memory
kfree(card->mpa_rx.buf);
^~~~~~~~~~~~~~~~~~~~~~~
When mwifiex_init_sdio() fails in its first call to
mwifiex_alloc_sdio_mpa_buffer, it falls back to calling it
again. If the second alloc of mpa_tx.buf fails, the error
handler will try to free the old, previously freed mpa_rx.buf.
Reviewing the code, it looks like a second double free would
happen with mwifiex_cleanup_sdio().
So set both pointers to NULL when they are freed.
Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201004131931.29782-1-trix@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 903b3f9badf1d54f77b468b96706dab679b45b14 ]
A print in the remain on channel code was too long and caused
a WARNING, split it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: dc28e12f2125 ("iwlwifi: mvm: ROC: Extend the ROC max delay duration & limit ROC duration")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20200930102759.58d57c0bdc68.Ib06008665e7bf1199c360aa92691d9c74fb84990@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 63f6982075d890d7563e2469643f05a37d193f01 ]
Currently if an unsupported iftype is detected the error return path
does not free the cmd_skb leading to a resource leak. Fix this by
free'ing cmd_skb.
Addresses-Coverity: ("Resource leak")
Fixes: 805b28c05c8e ("qtnfmac: prepare for AP_VLAN interface type support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200925132224.21638-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6a950755cec1a90ddaaff3e4acb5333617441c32 ]
The "tsid" is a user controlled u8 which comes from debugfs. Values
more than 15 are invalid because "active_tsids" is a 16 bit variable.
If the value of "tsid" is more than 31 then that leads to a shift
wrapping bug.
Fixes: 8fffd9e5ec9e ("ath6kl: Implement support for QOS-enable and QOS-disable from userspace")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200918142732.GA909725@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d2ab7f00f4321370a8ee14e5630d4349fdacc42e ]
A possible call chain is as follow:
mwifiex_sdio_interrupt (sdio.c)
--> mwifiex_main_process (main.c)
--> mwifiex_process_cmdresp (cmdevt.c)
--> mwifiex_process_sta_cmdresp (sta_cmdresp.c)
--> mwifiex_ret_802_11_scan (scan.c)
--> mwifiex_parse_single_response_buf (scan.c)
'mwifiex_sdio_interrupt()' is an interrupt function.
Also note that 'mwifiex_ret_802_11_scan()' already uses GFP_ATOMIC.
So use GFP_ATOMIC instead of GFP_KERNEL when memory is allocated in
'mwifiex_parse_single_response_buf()'.
Fixes: 7c6fa2a843c5 ("mwifiex: use cfg80211 dynamic scan table and cfg80211_get_bss API")
or
Fixes: 601216e12c65e ("mwifiex: process RX packets in SDIO IRQ thread directly")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200809092906.744621-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9c9f015bc9f8839831c7ba0a6d731a3853c464e2 ]
Clang static analysis reports this error
brcmfmac/core.c:490:4: warning: Dereference of null pointer
(*ifp)->ndev->stats.rx_errors++;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In this block of code
if (ret || !(*ifp) || !(*ifp)->ndev) {
if (ret != -ENODATA && *ifp)
(*ifp)->ndev->stats.rx_errors++;
brcmu_pkt_buf_free_skb(skb);
return -ENODATA;
}
(*ifp)->ndev being NULL is caught as an error
But then it is used to report the error.
So add a check before using it.
Fixes: 91b632803ee4 ("brcmfmac: Use net_device_stats from struct net_device")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200802161804.6126-1-trix@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3b9fb6791e7113679b1eb472e6ce1659e80f5797 ]
Qualcomm's document "80-WL007-1 Rev. J" states that the highest rx rate for
the WCN3660 and WCN3680 on MCS 7 is 150 Mbps not the 72 Mbps stated here.
This patch fixes the data-rate declared in the 5GHz table.
Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680
hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200802004824.1307124-1-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
handling path
[ Upstream commit 454530a9950b5a26d4998908249564cedfc4babc ]
Update the size used in 'dma_free_coherent()' in order to match the one
used in the corresponding 'dma_alloc_coherent()'.
Fixes: 1863008369ae ("ath10k: fix shadow register implementation for WCN3990")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200802122227.678637-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2705cd7558e718a7240c64eb0afb2edad5f8c190 ]
The value of "htc_hdr->endpoint_id" comes from skb->data so Smatch marks
it as untrusted so we have to check it before using it as an array
offset.
This is similar to a bug that syzkaller found in commit e4ff08a4d727
("ath9k: Fix use-after-free Write in ath9k_htc_rx_msg") so it is
probably a real issue.
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200813141253.GA457408@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54f9ab7b870934b70e5a21786d951fbcf663970f ]
The value for "aid" comes from skb->data so Smatch marks it as
untrusted. If it's invalid then it can result in an out of bounds array
access in ath6kl_add_new_sta().
Fixes: 572e27c00c9d ("ath6kl: Fix AP mode connect event parsing and TIM updates")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200813141315.GB457408@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 720e5c03e5cb26d33d97f55192b791bb48478aa5 ]
It is expected that the returned counters by .get_survey are monotonic
increasing. But the data from ath10k gets reset to zero regularly. Channel
active/busy time are then showing incorrect values (less than previous or
sometimes zero) for the currently active channel during successive survey
dump commands.
example:
$ iw dev wlan0 survey dump
Survey data from wlan0
frequency: 5180 MHz [in use]
channel active time: 54995 ms
channel busy time: 432 ms
channel receive time: 0 ms
channel transmit time: 59 ms
...
$ iw dev wlan0 survey dump
Survey data from wlan0
frequency: 5180 MHz [in use]
channel active time: 32592 ms
channel busy time: 254 ms
channel receive time: 0 ms
channel transmit time: 0 ms
...
The correct way to handle this is to use the non-clearing
WMI_BSS_SURVEY_REQ_TYPE_READ wmi_bss_survey_req_type. The firmware will
then accumulate the survey data and handle wrap arounds.
Tested-on: QCA9984 hw1.0 10.4-3.5.3-00057
Tested-on: QCA988X hw2.0 10.2.4-1.0-00047
Tested-on: QCA9888 hw2.0 10.4-3.9.0.2-00024
Tested-on: QCA4019 hw1.0 10.4-3.6-00140
Fixes: fa7937e3d5c2 ("ath10k: update bss channel survey information")
Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Tested-by: Markus Theil <markus.theil@tu-ilmenau.de>
Tested-by: John Deere <24601deerej@gmail.com>
[sven@narfation.org: adjust commit message]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1592232686-28712-1-git-send-email-kvalo@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4afc850e2e9e781976fb2c7852ce7bac374af938 ]
Following commit e18696786548 ("mwifiex: Prevent memory corruption
handling keys") the mwifiex driver fails to authenticate with certain
networks, specifically networks with 256 bit keys, and repeatedly asks
for the password. The kernel log repeats the following lines (id and
bssid redacted):
mwifiex_pcie 0000:01:00.0: info: trying to associate to '<id>' bssid <bssid>
mwifiex_pcie 0000:01:00.0: info: associated to bssid <bssid> successfully
mwifiex_pcie 0000:01:00.0: crypto keys added
mwifiex_pcie 0000:01:00.0: info: successfully disconnected from <bssid>: reason code 3
Tracking down this problem lead to the overflow check introduced by the
aforementioned commit into mwifiex_ret_802_11_key_material_v2(). This
check fails on networks with 256 bit keys due to the current storage
size for AES keys in struct mwifiex_aes_param being only 128 bit.
To fix this issue, increase the storage size for AES keys to 256 bit.
Fixes: e18696786548 ("mwifiex: Prevent memory corruption handling keys")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reported-by: Kaloyan Nikolov <konik98@gmail.com>
Tested-by: Kaloyan Nikolov <konik98@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200825153829.38043-1-luzmaximilian@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 282a04bf1d8029eb98585cb5db3fd70fe8bc91f7 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
the call returns an error code. Thus a pairing decrement is needed
on the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200520124649.10848-1-dinghao.liu@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9604617e998b49f7695fea1479ed82421ef8c9f0 ]
There are two error handling paths in this functon. When
wlcore_tx_work_locked() returns an error code, we should
decrease the runtime PM usage counter the same way as the
error handling path beginning from pm_runtime_get_sync().
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200520124241.9931-1-dinghao.liu@zju.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 402f2992b4d62760cce7c689ff216ea3bf4d6e8a ]
When use command to read values, it crashed.
command:
dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value count=1 bs=4 skip=$((0x100233))
It will call to ath10k_sdio_hif_diag_read with address = 0x4008cc and buf_len = 4.
Then system crash:
[ 1786.013258] Unable to handle kernel paging request at virtual address ffffffc00bd45000
[ 1786.013273] Mem abort info:
[ 1786.013281] ESR = 0x96000045
[ 1786.013291] Exception class = DABT (current EL), IL = 32 bits
[ 1786.013299] SET = 0, FnV = 0
[ 1786.013307] EA = 0, S1PTW = 0
[ 1786.013314] Data abort info:
[ 1786.013322] ISV = 0, ISS = 0x00000045
[ 1786.013330] CM = 0, WnR = 1
[ 1786.013342] swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000008542a60e
[ 1786.013350] [ffffffc00bd45000] pgd=0000000000000000, pud=0000000000000000
[ 1786.013368] Internal error: Oops: 96000045 [#1] PREEMPT SMP
[ 1786.013609] Process swapper/0 (pid: 0, stack limit = 0x0000000084b153c6)
[ 1786.013623] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.86 #137
[ 1786.013631] Hardware name: MediaTek krane sku176 board (DT)
[ 1786.013643] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[ 1786.013662] pc : __memcpy+0x94/0x180
[ 1786.013678] lr : swiotlb_tbl_unmap_single+0x84/0x150
[ 1786.013686] sp : ffffff8008003c60
[ 1786.013694] x29: ffffff8008003c90 x28: ffffffae96411f80
[ 1786.013708] x27: ffffffae960d2018 x26: ffffff8019a4b9a8
[ 1786.013721] x25: 0000000000000000 x24: 0000000000000001
[ 1786.013734] x23: ffffffae96567000 x22: 00000000000051d4
[ 1786.013747] x21: 0000000000000000 x20: 00000000fe6e9000
[ 1786.013760] x19: 0000000000000004 x18: 0000000000000020
[ 1786.013773] x17: 0000000000000001 x16: 0000000000000000
[ 1786.013787] x15: 00000000ffffffff x14: 00000000000044c0
[ 1786.013800] x13: 0000000000365ba4 x12: 0000000000000000
[ 1786.013813] x11: 0000000000000001 x10: 00000037be6e9000
[ 1786.013826] x9 : ffffffc940000000 x8 : 000000000bd45000
[ 1786.013839] x7 : 0000000000000000 x6 : ffffffc00bd45000
[ 1786.013852] x5 : 0000000000000000 x4 : 0000000000000000
[ 1786.013865] x3 : 0000000000000c00 x2 : 0000000000000004
[ 1786.013878] x1 : fffffff7be6e9004 x0 : ffffffc00bd45000
[ 1786.013891] Call trace:
[ 1786.013903] __memcpy+0x94/0x180
[ 1786.013914] unmap_single+0x6c/0x84
[ 1786.013925] swiotlb_unmap_sg_attrs+0x54/0x80
[ 1786.013938] __swiotlb_unmap_sg_attrs+0x8c/0xa4
[ 1786.013952] msdc_unprepare_data+0x6c/0x84
[ 1786.013963] msdc_request_done+0x58/0x84
[ 1786.013974] msdc_data_xfer_done+0x1a0/0x1c8
[ 1786.013985] msdc_irq+0x12c/0x17c
[ 1786.013996] __handle_irq_event_percpu+0xe4/0x250
[ 1786.014006] handle_irq_event_percpu+0x28/0x68
[ 1786.014015] handle_irq_event+0x48/0x78
[ 1786.014026] handle_fasteoi_irq+0xd0/0x1a0
[ 1786.014039] __handle_domain_irq+0x84/0xc4
[ 1786.014050] gic_handle_irq+0x124/0x1a4
[ 1786.014059] el1_irq+0xb0/0x128
[ 1786.014072] cpuidle_enter_state+0x298/0x328
[ 1786.014082] cpuidle_enter+0x30/0x40
[ 1786.014094] do_idle+0x190/0x268
[ 1786.014104] cpu_startup_entry+0x24/0x28
[ 1786.014116] rest_init+0xd4/0xe0
[ 1786.014126] start_kernel+0x30c/0x38c
[ 1786.014139] Code: f8408423 f80084c3 36100062 b8404423 (b80044c3)
[ 1786.014150] ---[ end trace 3b02ddb698ea69ee ]---
[ 1786.015415] Kernel panic - not syncing: Fatal exception in interrupt
[ 1786.015433] SMP: stopping secondary CPUs
[ 1786.015447] Kernel Offset: 0x2e8d200000 from 0xffffff8008000000
[ 1786.015458] CPU features: 0x0,2188200c
[ 1786.015466] Memory Limit: none
For sdio chip, it need the memory which is kmalloc, if it is
vmalloc from ath10k_mem_value_read, then it have a memory error.
kzalloc of ath10k_sdio_hif_diag_read32 is the correct type, so
add kzalloc in ath10k_sdio_hif_diag_read to replace the buffer
which is vmalloc from ath10k_mem_value_read.
This patch only effect sdio chip.
Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9379df2fd9234e3b67a23101c2370c99f6af6d77 ]
During the cleanup of the aggregation session, a rx handler (or release timer)
on another CPU might still hold a pointer to the reorder buffer and could
attempt to release some packets.
Clearing pointers during cleanup avoids a theoretical use-after-free bug here.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5b362498a79631f283578b64bf6f4d15ed4cc19a ]
Add the required USB ID for running SMCWUSBT-G2 wireless adapter (SMC
"EZ Connect g").
This device uses ar5523 chipset and requires firmware to be loaded. Even
though pid of the device is 4507, this patch adds it as 4506 so that
AR5523_DEVICE_UG macro can set the AR5523_FLAG_PRE_FIRMWARE flag for pid
4507.
Signed-off-by: Mert Dirik <mertdirik@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|