summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2016-12-11e1000: use disable_hardirq() for e1000_netpoll()WANG Cong2-6/+6
In commit 02cea3958664 ("genirq: Provide disable_hardirq()") Peter introduced disable_hardirq() for netpoll, but it is forgotten to use it for e1000. This patch changes disable_irq() to disable_hardirq() for e1000. Reported-by: Dave Jones <davej@codemonkey.org.uk> Suggested-by: Sabrina Dubroca <sd@queasysnail.net> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11i40e: don't truncate match_method assignmentKeller, Jacob E1-2/+1
The .match_method field is a u8, so we shouldn't be casting to a u16, and because it is only one byte, we do not need to byte swap anything. Just assign the value directly. This avoids issues on Big Endian architectures which would have byte swapped and then incorrectly truncated the value. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Bimmy Pujari <bimmy.pujari@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: ethernet: ti: netcp: add support of cptsWingMan Kwok4-14/+452
This patch adds support of the cpts device found in the gbe and 10gbe ethernet switches on the keystone 2 SoCs (66AK2E/L/Hx, 66AK2Gx). Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: phy: phy drivers should not set SUPPORTED_[Asym_]PauseTimur Tabi11-90/+67
Instead of having individual PHY drivers set the SUPPORTED_Pause and SUPPORTED_Asym_Pause flags, phylib itself should set those flags, unless there is a hardware erratum or other special case. During autonegotiation, the PHYs will determine whether to enable pause frame support. Pause frames are a feature that is supported by the MAC. It is the MAC that generates the frames and that processes them. The PHY can only be configured to allow them to pass through. This commit also effectively reverts the recently applied c7a61319 ("net: phy: dp83848: Support ethernet pause frames"). So the new process is: 1) Unless the PHY driver overrides it, phylib sets the SUPPORTED_Pause and SUPPORTED_AsymPause bits in phydev->supported. This indicates that the PHY supports pause frames. 2) The MAC driver checks phydev->supported before it calls phy_start(). If (SUPPORTED_Pause | SUPPORTED_AsymPause) is set, then the MAC driver sets those bits in phydev->advertising, if it wants to enable pause frame support. 3) When the link state changes, the MAC driver checks phydev->pause and phydev->asym_pause, If the bits are set, then it enables the corresponding features in the MAC. The algorithm is: if (phydev->pause) The MAC should be programmed to receive and honor pause frames it receives, i.e. enable receive flow control. if (phydev->pause != phydev->asym_pause) The MAC should be programmed to transmit pause frames when needed, i.e. enable transmit flow control. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: ethernet: stmmac: remove private tx queue lockLino Sanfilippo2-23/+6
The driver uses a private lock for synchronization of the xmit function and the xmit completion handler, but since the NETIF_F_LLTX flag is not set, the xmit function is also called with the xmit_lock held. On the other hand the completion handler uses the reverse locking order by first taking the private lock and (in case that the tx queue had been stopped) then the xmit_lock. Improve the locking by removing the private lock and using only the xmit_lock for synchronization instead. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: ethernet: sxgbe: remove private tx queue lockLino Sanfilippo2-22/+6
The driver uses a private lock for synchronization of the xmit function and the xmit completion handler, but since the NETIF_F_LLTX flag is not set, the xmit function is also called with the xmit_lock held. On the other hand the completion handler uses the reverse locking order by first taking the private lock and (in case that the tx queue had been stopped) then the xmit_lock. Improve the locking by removing the private lock and using only the xmit_lock for synchronization instead. Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: nicvf: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-25/+31
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: ethernet: ti: cpsw: sync rates for channels in dual emac modeIvan Khoronzhuk1-1/+11
The channels are common for both ndevs in dual emac mode. Hence, keep in sync their rates. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: ethernet: ti: cpsw: re-split res only when speed is changedIvan Khoronzhuk1-5/+59
Don't re-split res in the following cases: - speed of phys is not changed - speed of phys is changed and no rate limited channels - speed of phys is changed and all channels are rate limited - phy is unlinked while dev is open - phy is linked back but speed is not changed The maximum speed is sum of "linked" phys, thus res are split taken in account two interfaces, both for dual emac mode and for switch mode. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: ethernet: ti: cpsw: combine budget and weight split and checkIvan Khoronzhuk1-73/+34
Re-split weight along with budget. It simplify code a little and update state after every rate change. Also it's necessarily to move arguments checks to this combined function. Replace maximum rate check for an interface on maximum possible rate. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: ethernet: ti: cpsw: don't start queue twiceIvan Khoronzhuk1-2/+0
No need to start queues after cpsw is started as it will be done while cpsw_adjust_link(), after phy connection. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: ethernet: ti: cpsw: use same macros to get active slaveIvan Khoronzhuk1-4/+1
Use the same, more convenient macros, to get active slave. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11net: mvneta: select GENERIC_ALLOCATORArnd Bergmann1-0/+1
We previously relied on GENERIC_ALLOCATOR to be selected by CONFIG_ARM, but now we can compile-test the driver on other architectures that don't select it: drivers/net/built-in.o: In function `mvneta_bm_remove': mvneta_bm.c:(.text+0x4ee35): undefined reference to `gen_pool_free' This adds an explicit select for the part of the driver that has the dependency. Fixes: a0627f776a45 ("net: marvell: Allow drivers to be built with COMPILE_TEST") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller16-17/+132
2016-12-10net: mlx5: Fix Kconfig help textChristopher Covington1-2/+0
Since the following commit, Infiniband and Ethernet have not been mutually exclusive. Fixes: 4aa17b28 mlx5: Enable mutual support for IB and Ethernet Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10net: smsc911x: back out silently on probe deferralsLinus Walleij1-1/+8
When trying to get a regulator we may get deferred and we see this noise: smsc911x 1b800000.ethernet-ebi2 (unnamed net_device) (uninitialized): couldn't get regulators -517 Then the driver continues anyway. Which means that the regulator may not be properly retrieved and reference counted, and may be switched off in case noone else is using it. Fix this by returning silently on deferred probe and let the system work it out. Cc: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10ibmveth: set correct gso_size and gso_typeThomas Falcon2-2/+64
This patch is based on an earlier one submitted by Jon Maxwell with the following commit message: "We recently encountered a bug where a few customers using ibmveth on the same LPAR hit an issue where a TCP session hung when large receive was enabled. Closer analysis revealed that the session was stuck because the one side was advertising a zero window repeatedly. We narrowed this down to the fact the ibmveth driver did not set gso_size which is translated by TCP into the MSS later up the stack. The MSS is used to calculate the TCP window size and as that was abnormally large, it was calculating a zero window, even although the sockets receive buffer was completely empty." We rely on the Virtual I/O Server partition in a pseries environment to provide the MSS through the TCP header checksum field. The stipulation is that users should not disable checksum offloading if rx packet aggregation is enabled through VIOS. Some firmware offerings provide the MSS in the RX buffer. This is signalled by a bit in the RX queue descriptor. Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Jonathan Maxwell <jmaxwell37@gmail.com> Reviewed-by: David Dai <zdai@us.ibm.com> Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10net: qcom/emac: add support for the Qualcomm Technologies QDF2400Timur Tabi4-5/+249
The QDF2432 and the QDF2400 have slightly different internal PHYs, so there are some programming differences. Some of the registers in the QDF2400 have moved, and some registers require different values during initialization. Because of the differences, and because HIDs are a scare resource, the ACPI tables specify the hardware version in an _HRV property. Version 1 is the QDF2432, and version 2 is the QDF2400. Any future SOC that has the same internal PHY but different programming requirements will be assigned the next available version number. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10net: qcom/emac: move phy init code to separate filesTimur Tabi5-523/+478
The internal PHY of the EMAC differs on each SOC, and the list will only continue to grow. By separating the code into individual files, we can add support for more SOCs more cleanly. Note: The internal PHY is also sometimes called the SGMII device. We also stop referring to the various PHY variations by version number, so no more "v2", "v3", etc. Instead, the devices are named after the SOC they are, which is in sync with the device tree property names. Future patches will probably rearrange more code among the files. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09net: xgene: avoid bogus maybe-uninitialized warningArnd Bergmann1-3/+3
In some configurations, gcc cannot trace the state of variables across a spin_unlock() barrier, leading to a warning about correct code: xgene_enet_main.c: In function 'xgene_enet_start_xmit': ../../../phy/mdio-xgene.h:112:14: error: 'mss_index' may be used uninitialized in this function [-Werror=maybe-uninitialized] Here we can trivially move the assignment before that spin_unlock, which reliably avoids the warning. Fixes: e3978673f514 ("drivers: net: xgene: Fix MSS programming") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09net: xgene: move xgene_cle_ptree_ewdn data off stackArnd Bergmann2-389/+381
The array for initializing the cle is set up on the stack with almost entirely constant data and then passed to a function that converts it into HW specific bit patterns. With the latest addition, the size of this array has grown to the point that we get a warning about potential stack overflow in allmodconfig builds: xgene_enet_cle.c: In function ‘xgene_enet_cle_init’: xgene_enet_cle.c:836:1: error: the frame size of 1032 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Looking a bit deeper at the usage, I noticed that the only modification of the data is in dead code, as we don't even use the cle module for phy_mode other than PHY_INTERFACE_MODE_XGMII. This means we can simply mark the structure constant and access it directly rather than passing the pointer down through another structure, making the code more efficient at the same time as avoiding the warning. Fixes: a809701fed15 ("drivers: net: xgene: fix: RSS for non-TCP/UDP") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09net/mlx5e: use %pad format string for dma_addr_tArnd Bergmann1-2/+2
On 32-bit ARM with 64-bit dma_addr_t I get this warning about an incorrect format string: In file included from /git/arm-soc/drivers/net/ethernet/mellanox/mlx5/core/alloc.c:42:0: drivers/net/ethernet/mellanox/mlx5/core/alloc.c: In function ‘mlx5_frag_buf_alloc_node’: drivers/net/ethernet/mellanox/mlx5/core/alloc.c:134:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] We have the special %pad format for printing dma_addr_t, so use that to print the correct address and avoid the warning. Fixes: 1c1b522808a1 ("net/mlx5e: Implement Fragmented Work Queue (WQ)") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09net: ethernet: cpmac: Call SET_NETDEV_DEV()Florian Fainelli1-0/+1
The TI CPMAC driver calls into PHYLIB which now checks for net_device->dev.parent, so make sure we do set it before calling into any MDIO/PHYLIB related function. Fixes: ec988ad78ed6 ("phy: Don't increment MDIO bus refcount unless it's a different owner") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09net: ethernet: lantiq_etop: Call SET_NETDEV_DEV()Florian Fainelli1-0/+1
The Lantiq Etop driver calls into PHYLIB which now checks for net_device->dev.parent, so make sure we do set it before calling into any MDIO/PHYLIB related function. Fixes: ec988ad78ed6 ("phy: Don't increment MDIO bus refcount unless it's a different owner") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09Merge tag 'linux-can-fixes-for-4.9-20161208' of ↵David S. Miller1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-12-08 this is a pull request for one patch. Jiho Chu found and fixed a use-after-free error in the cleanup path in the peak pcan USB CAN driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09cxgb4/cxgb4vf: Assign netdev->dev_port with port IDArjun V3-1/+2
Added missing dev_port assignment in cxgb4vf driver. Also made dev_port assignment of cxgb4 in sync with cxgb4vf driver. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Arjun V <arjun@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09liquidio VF error handlingRaghu Vatsavayi1-0/+139
Adds support for VF error handling. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09liquidio VF timestampRaghu Vatsavayi1-1/+179
Adds support for VF timestamp. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09liquidio VF ethtool statsRaghu Vatsavayi3-98/+495
Adds support for VF ethtool stats Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09liquidio VF vxlanRaghu Vatsavayi1-3/+94
Adds VF vxlan offload support. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-09liquidio VF vlan supportRaghu Vatsavayi1-0/+80
Adds support for VF vlan features. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08Merge branch 'for-upstream' of ↵David S. Miller2-10/+80
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-12-08 I didn't miss your "net-next is closed" email, but it did come as a bit of a surprise, and due to time-zone differences I didn't have a chance to react to it until now. We would have had a couple of patches in bluetooth-next that we'd still have wanted to get to 4.10. Out of these the most critical one is the H7/CT2 patch for Bluetooth Security Manager Protocol, something that couldn't be published before the Bluetooth 5.0 specification went public (yesterday). If these really can't go to net-next we'll likely be sending at least this patch through bluetooth.git to net.git for rc1 inclusion. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08cxgb4/cxgb4vf: Remove deprecated module parametersGanesh Goudar2-48/+2
Remove deprecated module parameters num_vf, dflt_msg_enable and force_init. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08driver: ipvlan: Unlink the upper dev when ipvlan_link_new failedGao Feng1-1/+3
When netdev_upper_dev_unlink failed in ipvlan_link_new, need to unlink the ipvlan dev with upper dev. Signed-off-by: Gao Feng <fgao@ikuai8.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08mlx4: xdp: Reserve headroom for receiving packet when XDP prog is activeMartin KaFai Lau4-17/+27
Reserve XDP_PACKET_HEADROOM for packet and enable bpf_xdp_adjust_head() support. This patch only affects the code path when XDP is active. After testing, the tx_dropped counter is incremented if the xdp_prog sends more than wire MTU. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08mlx4: xdp: Allow raising MTU up to one page minus eth and vlan hdrsMartin KaFai Lau2-30/+44
When XDP is active in mlx4, mlx4 is using one page/pkt. At the same time (i.e. when XDP is active), it is currently limiting MTU to be FRAG_SZ0 - ETH_HLEN - (2 * VLAN_HLEN) which is 1514 in x86. AFAICT, we can at least raise the MTU limit up to PAGE_SIZE - ETH_HLEN - (2 * VLAN_HLEN) which this patch is doing. It will be useful in the next patch which allows XDP program to extend the packet by adding new header(s). Note: In the earlier XDP patches, there is already existing guard to ensure the page/pkt scheme only applies when XDP is active in mlx4. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08bpf: xdp: Allow head adjustment in XDP progMartin KaFai Lau4-0/+19
This patch allows XDP prog to extend/remove the packet data at the head (like adding or removing header). It is done by adding a new XDP helper bpf_xdp_adjust_head(). It also renames bpf_helper_changes_skb_data() to bpf_helper_changes_pkt_data() to better reflect that XDP prog does not work on skb. This patch adds one "xdp_adjust_head" bit to bpf_prog for the XDP-capable driver to check if the XDP prog requires bpf_xdp_adjust_head() support. The driver can then decide to error out during XDP_SETUP_PROG. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08lan78xx: add LAN7801 MAC only supportWoojung Huh3-2/+126
Add LAN7801 MAC only support with phy fixup functions. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08phy: add phy fixup unregister functionsWoojung.Huh@microchip.com1-0/+47
>From : Woojung Huh <woojung.huh@microchip.com> Add functions to unregister phy fixup for modules. int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask) Unregister phy fixup from phy_fixup_list per bus_id, phy_uid & phy_uid_mask int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask) Unregister phy fixup from phy_fixup_list. Use it for fixup registered by phy_register_fixup_for_uid() int phy_unregister_fixup_for_id(const char *bus_id) Unregister phy fixup from phy_fixup_list. Use it for fixup registered by phy_register_fixup_for_id() Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08liquidio VF rx data and ctl pathRaghu Vatsavayi4-4/+423
Adds support for VF receive data control path. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08liquidio CN23XX: VF TX buffersRaghu Vatsavayi1-0/+182
Adds support for freeing VF xmit buffers. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08liquidio CN23XX: VF xmitRaghu Vatsavayi3-3/+364
Adds support for transmit functionality in VF. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08liquidio CN23XX: VF scatter gather listsRaghu Vatsavayi1-0/+134
Adds support for VF scatter gather lists. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08liquidio CN23XX: VF mac addressRaghu Vatsavayi3-0/+197
Adds support for configuring mtu, multicast and mac address. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08liquidio CN23XX: VF link statusRaghu Vatsavayi1-0/+249
Adds support for VF link status related changes. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08liquidio CN23XX: VF offload featuresRaghu Vatsavayi2-0/+565
Adds support for VF link initialization and offload features. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08macsec: remove first zero and add attribute name in commentsZhang Shengju1-13/+12
Remove first zero for add, and use full attribute name in comments. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: smmac: allow configuring lower pbl valuesNiklas Cassel4-2/+7
The driver currently always sets the PBLx8/PBLx4 bit, which means that the pbl values configured via the pbl/txpbl/rxpbl DT properties are always multiplied by 8/4 in the hardware. In order to allow the DT to configure lower pbl values, while at the same time not changing behavior of any existing device trees using the pbl/txpbl/rxpbl settings, add a property to disable the multiplication of the pbl by 8/4 in the hardware. Suggested-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: stmmac: add support for independent DMA pbl for tx/rxNiklas Cassel3-11/+15
GMAC and newer supports independent programmable burst lengths for DMA tx/rx. Add new optional devicetree properties representing this. To be backwards compatible, snps,pbl will still be valid, but snps,txpbl/snps,rxpbl will override the value in snps,pbl if set. If the IP is synthesized to use the AXI interface, there is a register and a matching DT property inside the optional stmmac-axi-config DT node for controlling burst lengths, named snps,blen. However, using this register, it is not possible to control tx and rx independently. Also, this register is not available if the IP was synthesized with, e.g., the AHB interface. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: stmmac: dwmac1000: fix define DMA_BUS_MODE_RPBL_MASKNiklas Cassel1-1/+1
DMA_BUS_MODE_RPBL_MASK is really 6 bits, just like DMA_BUS_MODE_PBL_MASK. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-01 15:45:00 +0300