summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-03-07xen-netback: respect gnttab_map_refs()'s return valueJan Beulich1-1/+11
commit 2991397d23ec597405b116d96de3813420bdcbc3 upstream. Commit 3194a1746e8a ("xen-netback: don't "handle" error by BUG()") dropped respective a BUG_ON() without noticing that with this the variable's value wouldn't be consumed anymore. With gnttab_set_map_op() setting all status fields to a non-zero value, in case of an error no slot should have a status of GNTST_okay (zero). This is part of XSA-367. Cc: <stable@vger.kernel.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/d933f495-619a-0086-5fb4-1ec3cf81a8fc@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-07ath10k: fix wmi mgmt tx queue full due to race conditionMiaoqing Pan1-11/+4
[ Upstream commit b55379e343a3472c35f4a1245906db5158cab453 ] Failed to transmit wmi management frames: [84977.840894] ath10k_snoc a000000.wifi: wmi mgmt tx queue is full [84977.840913] ath10k_snoc a000000.wifi: failed to transmit packet, dropping: -28 [84977.840924] ath10k_snoc a000000.wifi: failed to submit frame: -28 [84977.840932] ath10k_snoc a000000.wifi: failed to transmit frame: -28 This issue is caused by race condition between skb_dequeue and __skb_queue_tail. The queue of ‘wmi_mgmt_tx_queue’ is protected by a different lock: ar->data_lock vs list->lock, the result is no protection. So when ath10k_mgmt_over_wmi_tx_work() and ath10k_mac_tx_wmi_mgmt() running concurrently on different CPUs, there appear to be a rare corner cases when the queue length is 1, CPUx (skb_deuque) CPUy (__skb_queue_tail) next=list prev=list struct sk_buff *skb = skb_peek(list); WRITE_ONCE(newsk->next, next); WRITE_ONCE(list->qlen, list->qlen - 1);WRITE_ONCE(newsk->prev, prev); next = skb->next; WRITE_ONCE(next->prev, newsk); prev = skb->prev; WRITE_ONCE(prev->next, newsk); skb->next = skb->prev = NULL; list->qlen++; WRITE_ONCE(next->prev, prev); WRITE_ONCE(prev->next, next); If the instruction ‘next = skb->next’ is executed before ‘WRITE_ONCE(prev->next, newsk)’, newsk will be lost, as CPUx get the old ‘next’ pointer, but the length is still added by one. The final result is the length of the queue will reach the maximum value but the queue is empty. So remove ar->data_lock, and use 'skb_queue_tail' instead of '__skb_queue_tail' to prevent the potential race condition. Also switch to use skb_queue_len_lockless, in case we queue a few SKBs simultaneously. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1.c2-00033-QCAHLSWMTPLZ-1 Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608618887-8857-1-git-send-email-miaoqing@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07wlcore: Fix command execute failure 19 for wl12xxTony Lindgren3-20/+1
[ Upstream commit cb88d01b67383a095e3f7caeb4cdade5a6cf0417 ] We can currently get a "command execute failure 19" error on beacon loss if the signal is weak: wlcore: Beacon loss detected. roles:0xff wlcore: Connection loss work (role_id: 0). ... wlcore: ERROR command execute failure 19 ... WARNING: CPU: 0 PID: 1552 at drivers/net/wireless/ti/wlcore/main.c:803 ... (wl12xx_queue_recovery_work.part.0 [wlcore]) (wl12xx_cmd_role_start_sta [wlcore]) (wl1271_op_bss_info_changed [wlcore]) (ieee80211_prep_connection [mac80211]) Error 19 is defined as CMD_STATUS_WRONG_NESTING from the wlcore firmware, and seems to mean that the firmware no longer wants to see the quirk handling for WLCORE_QUIRK_START_STA_FAILS done. This quirk got added with commit 18eab430700d ("wlcore: workaround start_sta problem in wl12xx fw"), and it seems that this already got fixed in the firmware long time ago back in 2012 as wl18xx never had this quirk in place to start with. As we no longer even support firmware that early, to me it seems that it's safe to just drop WLCORE_QUIRK_START_STA_FAILS to fix the error. Looks like earlier firmware got disabled back in 2013 with commit 0e284c074ef9 ("wl12xx: increase minimum singlerole firmware version required"). If it turns out we still need WLCORE_QUIRK_START_STA_FAILS with any firmware that the driver works with, we can simply revert this patch and add extra checks for firmware version used. With this fix wlcore reconnects properly after a beacon loss. Cc: Raz Bouganim <r-bouganim@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210115065613.7731-1-tony@atomide.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07rsi: Move card interrupt handling to RX threadMarek Vasut3-51/+15
[ Upstream commit 287431463e786766e05e4dc26d0a11d5f8ac8815 ] The interrupt handling of the RS911x is particularly heavy. For each RX packet, the card does three SDIO transactions, one to read interrupt status register, one to RX buffer length, one to read the RX packet(s). This translates to ~330 uS per one cycle of interrupt handler. In case there is more incoming traffic, this will be more. The drivers/mmc/core/sdio_irq.c has the following comment, quote "Just like traditional hard IRQ handlers, we expect SDIO IRQ handlers to be quick and to the point, so that the holding of the host lock does not cover too much work that doesn't require that lock to be held." The RS911x interrupt handler does not fit that. This patch therefore changes it such that the entire IRQ handler is moved to the RX thread instead, and the interrupt handler only wakes the RX thread. This is OK, because the interrupt handler only does things which can also be done in the RX thread, that is, it checks for firmware loading error(s), it checks buffer status, it checks whether a packet arrived and if so, reads out the packet and passes it to network stack. Moreover, this change permits removal of a code which allocated an skbuff only to get 4-byte-aligned buffer, read up to 8kiB of data into the skbuff, queue this skbuff into local private queue, then in RX thread, this buffer is dequeued, the data in the skbuff as passed to the RSI driver core, and the skbuff is deallocated. All this is replaced by directly calling the RSI driver core with local buffer. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103180941.443528-1-marex@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07rsi: Fix TX EAPOL packet handling against iwlwifi APMarek Vasut1-1/+2
[ Upstream commit 65277100caa2f2c62b6f3c4648b90d6f0435f3bc ] In case RSI9116 SDIO WiFi operates in STA mode against Intel 9260 in AP mode, the association fails. The former is using wpa_supplicant during association, the later is set up using hostapd: iwl$ cat hostapd.conf interface=wlp1s0 ssid=test country_code=DE hw_mode=g channel=1 wpa=2 wpa_passphrase=test wpa_key_mgmt=WPA-PSK iwl$ hostapd -d hostapd.conf rsi$ wpa_supplicant -i wlan0 -c <(wpa_passphrase test test) The problem is that the TX EAPOL data descriptor RSI_DESC_REQUIRE_CFM_TO_HOST flag and extended descriptor EAPOL4_CONFIRM frame type are not set in case the AP is iwlwifi, because in that case the TX EAPOL packet is 2 bytes shorter. The downstream vendor driver has this change in place already [1], however there is no explanation for it, neither is there any commit history from which such explanation could be obtained. [1] https://github.com/SiliconLabs/RS911X-nLink-OSD/blob/master/rsi/rsi_91x_hal.c#L238 Signed-off-by: Marek Vasut <marex@denx.de> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201015111616.429220-1-marex@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-07net: usb: qmi_wwan: support ZTE P685M modemLech Perczak1-0/+1
commit 88eee9b7b42e69fb622ddb3ff6f37e8e4347f5b2 upstream. Now that interface 3 in "option" driver is no longer mapped, add device ID matching it to qmi_wwan. The modem is used inside ZTE MF283+ router and carriers identify it as such. Interface mapping is: 0: QCDM, 1: AT (PCUI), 2: AT (Modem), 3: QMI, 4: ADB T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1275 Rev=f0.00 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=P685M510ZTED0000CP&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&0 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Link: https://lore.kernel.org/r/20210223183456.6377-1-lech.perczak@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04net: icmp: pass zeroed opts from icmp{,v6}_ndo_send before sendingJason A. Donenfeld1-1/+0
commit ee576c47db60432c37e54b1e2b43a8ca6d3a8dca upstream. The icmp{,v6}_send functions make all sorts of use of skb->cb, casting it with IPCB or IP6CB, assuming the skb to have come directly from the inet layer. But when the packet comes from the ndo layer, especially when forwarded, there's no telling what might be in skb->cb at that point. As a result, the icmp sending code risks reading bogus memory contents, which can result in nasty stack overflows such as this one reported by a user: panic+0x108/0x2ea __stack_chk_fail+0x14/0x20 __icmp_send+0x5bd/0x5c0 icmp_ndo_send+0x148/0x160 In icmp_send, skb->cb is cast with IPCB and an ip_options struct is read from it. The optlen parameter there is of particular note, as it can induce writes beyond bounds. There are quite a few ways that can happen in __ip_options_echo. For example: // sptr/skb are attacker-controlled skb bytes sptr = skb_network_header(skb); // dptr/dopt points to stack memory allocated by __icmp_send dptr = dopt->__data; // sopt is the corrupt skb->cb in question if (sopt->rr) { optlen = sptr[sopt->rr+1]; // corrupt skb->cb + skb->data soffset = sptr[sopt->rr+2]; // corrupt skb->cb + skb->data // this now writes potentially attacker-controlled data, over // flowing the stack: memcpy(dptr, sptr+sopt->rr, optlen); } In the icmpv6_send case, the story is similar, but not as dire, as only IP6CB(skb)->iif and IP6CB(skb)->dsthao are used. The dsthao case is worse than the iif case, but it is passed to ipv6_find_tlv, which does a bit of bounds checking on the value. This is easy to simulate by doing a `memset(skb->cb, 0x41, sizeof(skb->cb));` before calling icmp{,v6}_ndo_send, and it's only by good fortune and the rarity of icmp sending from that context that we've avoided reports like this until now. For example, in KASAN: BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xa0e/0x12b0 Write of size 38 at addr ffff888006f1f80e by task ping/89 CPU: 2 PID: 89 Comm: ping Not tainted 5.10.0-rc7-debug+ #5 Call Trace: dump_stack+0x9a/0xcc print_address_description.constprop.0+0x1a/0x160 __kasan_report.cold+0x20/0x38 kasan_report+0x32/0x40 check_memory_region+0x145/0x1a0 memcpy+0x39/0x60 __ip_options_echo+0xa0e/0x12b0 __icmp_send+0x744/0x1700 Actually, out of the 4 drivers that do this, only gtp zeroed the cb for the v4 case, while the rest did not. So this commit actually removes the gtp-specific zeroing, while putting the code where it belongs in the shared infrastructure of icmp{,v6}_ndo_send. This commit fixes the issue by passing an empty IPCB or IP6CB along to the functions that actually do the work. For the icmp_send, this was already trivial, thanks to __icmp_send providing the plumbing function. For icmpv6_send, this required a tiny bit of refactoring to make it behave like the v4 case, after which it was straight forward. Fixes: a2b78e9b2cac ("sunvnet: generate ICMP PTMUD messages for smaller port MTUs") Reported-by: SinYu <liuxyon@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/netdev/CAF=yD-LOF116aHub6RMe8vB8ZpnrrnoTdqhobEx+bvoA8AsP0w@mail.gmail.com/T/ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20210223131858.72082-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04sunvnet: use icmp_ndo_send helperJason A. Donenfeld1-19/+4
commit 67c9a7e1e3ac491b5df018803639addc36f154ba upstream. Because sunvnet is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. While we're at it, doing the additional route lookup before calling icmp_ndo_send is superfluous, since this is the job of the icmp code in the first place. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04gtp: use icmp_ndo_send helperJason A. Donenfeld1-2/+2
commit e0fce6f945a26d4e953a147fe7ca11410322c9fe upstream. Because gtp is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04r8169: fix jumbo packet handling on RTL8168eHeiner Kallweit1-2/+2
[ Upstream commit 6cf739131a15e4177e58a1b4f2bede9d5da78552 ] Josef reported [0] that using jumbo packets fails on RTL8168e. Aligning the values for register MaxTxPacketSize with the vendor driver fixes the problem. [0] https://bugzilla.kernel.org/show_bug.cgi?id=211827 Fixes: d58d46b5d851 ("r8169: jumbo fixes.") Reported-by: Josef Oškera <joskera@redhat.com> Tested-by: Josef Oškera <joskera@redhat.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/b15ddef7-0d50-4320-18f4-6a3f86fbfd3e@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04vxlan: move debug check after netdev unregisterTaehee Yoo1-3/+8
[ Upstream commit 92584ddf550ae72d492858c19d1f9025e07a9350 ] The debug check must be done after unregister_netdevice_many() call -- the hlist_del_rcu() for this is done inside .ndo_stop. This is the same with commit 0fda7600c2e1 ("geneve: move debug check after netdev unregister") Test commands: ip netns del A ip netns add A ip netns add B ip netns exec B ip link add vxlan0 type vxlan vni 100 local 10.0.0.1 \ remote 10.0.0.2 dstport 4789 srcport 4789 4789 ip netns exec B ip link set vxlan0 netns A ip netns exec A ip link set vxlan0 up ip netns del B Splat looks like: [ 73.176249][ T7] ------------[ cut here ]------------ [ 73.178662][ T7] WARNING: CPU: 4 PID: 7 at drivers/net/vxlan.c:4743 vxlan_exit_batch_net+0x52e/0x720 [vxlan] [ 73.182597][ T7] Modules linked in: vxlan openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 mlx5_core nfp mlxfw ixgbevf tls sch_fq_codel nf_tables nfnetlink ip_tables x_tables unix [ 73.190113][ T7] CPU: 4 PID: 7 Comm: kworker/u16:0 Not tainted 5.11.0-rc7+ #838 [ 73.193037][ T7] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 73.196986][ T7] Workqueue: netns cleanup_net [ 73.198946][ T7] RIP: 0010:vxlan_exit_batch_net+0x52e/0x720 [vxlan] [ 73.201509][ T7] Code: 00 01 00 00 0f 84 39 fd ff ff 48 89 ca 48 c1 ea 03 80 3c 1a 00 0f 85 a6 00 00 00 89 c2 48 83 c2 02 49 8b 14 d4 48 85 d2 74 ce <0f> 0b eb ca e8 b9 51 db dd 84 c0 0f 85 4a fe ff ff 48 c7 c2 80 bc [ 73.208813][ T7] RSP: 0018:ffff888100907c10 EFLAGS: 00010286 [ 73.211027][ T7] RAX: 000000000000003c RBX: dffffc0000000000 RCX: ffff88800ec411f0 [ 73.213702][ T7] RDX: ffff88800a278000 RSI: ffff88800fc78c70 RDI: ffff88800fc78070 [ 73.216169][ T7] RBP: ffff88800b5cbdc0 R08: fffffbfff424de61 R09: fffffbfff424de61 [ 73.218463][ T7] R10: ffffffffa126f307 R11: fffffbfff424de60 R12: ffff88800ec41000 [ 73.220794][ T7] R13: ffff888100907d08 R14: ffff888100907c50 R15: ffff88800fc78c40 [ 73.223337][ T7] FS: 0000000000000000(0000) GS:ffff888114800000(0000) knlGS:0000000000000000 [ 73.225814][ T7] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 73.227616][ T7] CR2: 0000562b5cb4f4d0 CR3: 0000000105fbe001 CR4: 00000000003706e0 [ 73.229700][ T7] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 73.231820][ T7] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 73.233844][ T7] Call Trace: [ 73.234698][ T7] ? vxlan_err_lookup+0x3c0/0x3c0 [vxlan] [ 73.235962][ T7] ? ops_exit_list.isra.11+0x93/0x140 [ 73.237134][ T7] cleanup_net+0x45e/0x8a0 [ ... ] Fixes: 57b61127ab7d ("vxlan: speedup vxlan tunnels dismantle") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20210221154552.11749-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04net/mlx4_core: Add missed mlx4_free_cmd_mailbox()Chuhong Yuan1-0/+1
[ Upstream commit 8eb65fda4a6dbd59cd5de24b106a10b6ee0d2176 ] mlx4_do_mirror_rule() forgets to call mlx4_free_cmd_mailbox() to free the memory region allocated by mlx4_alloc_cmd_mailbox() before an exit. Add the missed call to fix it. Fixes: 78efed275117 ("net/mlx4_core: Support mirroring VF DMFS rules on both ports") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20210221143559.390277-1-hslester96@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04i40e: Fix add TC filter for IPv6Mateusz Palczewski1-2/+3
[ Upstream commit 61c1e0eb8375def7c891bfe857bb795a57090526 ] Fix insufficient distinction between IPv4 and IPv6 addresses when creating a filter. IPv4 and IPv6 are kept in the same memory area. If IPv6 is added, then it's caught by IPv4 check, which leads to err -95. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04i40e: Fix VFs not createdSylwester Dziedziuch1-2/+1
[ Upstream commit dc8812626440fa6a27f1f3f654f6dc435e042e42 ] When creating VFs they were sometimes not getting resources. It was caused by not executing i40e_reset_all_vfs due to flag __I40E_VF_DISABLE being set on PF. Because of this IAVF was never able to finish setup sequence never getting reset indication from PF. Changed test_and_set_bit __I40E_VF_DISABLE in i40e_sync_filters_subtask to test_bit and removed clear_bit. This function should not set this bit it should only check if it hasn't been already set. Fixes: a7542b876075 ("i40e: check __I40E_VF_DISABLE bit in i40e_sync_filters_subtask") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04i40e: Fix overwriting flow control settings during driver loadingMateusz Palczewski1-27/+0
[ Upstream commit 4cdb9f80dcd46aab3c0020b4a6920c22735c5d6e ] During driver loading flow control settings were written to FW using a variable which was always zero, since it was being set only by ethtool. This behavior has been corrected and driver no longer overwrites the default FW/NVM settings. Fixes: 373149fc99a0 ("i40e: Decrease the scope of rtnl lock") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04i40e: Add zero-initialization of AQ command structuresMateusz Palczewski1-0/+6
[ Upstream commit d2c788f739b6f68090e968a2ee31b543701e795f ] Zero-initialize AQ command data structures to comply with API specifications. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Fixes: f4492db16df8 ("i40e: Add NPAR BW get and set functions") Signed-off-by: Andrzej Sawuła <andrzej.sawula@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04i40e: Fix flow for IPv6 next header (extension header)Slawomir Laba1-3/+6
[ Upstream commit 92c6058024e87087cf1b99b0389d67c0a886360e ] When a packet contains an IPv6 header with next header which is an extension header and not a protocol one, the kernel function skb_transport_header called with such sk_buff will return a pointer to the extension header and not to the TCP one. The above explained call caused a problem with packet processing for skb with encapsulation for tunnel with I40E_TX_CTX_EXT_IP_IPV6. The extension header was not skipped at all. The ipv6_skip_exthdr function does check if next header of the IPV6 header is an extension header and doesn't modify the l4_proto pointer if it points to a protocol header value so its safe to omit the comparison of exthdr and l4.hdr pointers. The ipv6_skip_exthdr can return value -1. This means that the skipping process failed and there is something wrong with the packet so it will be dropped. Fixes: a3fd9d8876a5 ("i40e/i40evf: Handle IPv6 extension headers in checksum offload") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04net: mvneta: Remove per-cpu queue mapping for Armada 3700Maxime Chevallier1-1/+8
[ Upstream commit cf9bf871280d9e0a8869d98c2602d29caf69dfa3 ] According to Errata #23 "The per-CPU GbE interrupt is limited to Core 0", we can't use the per-cpu interrupt mechanism on the Armada 3700 familly. This is correctly checked for RSS configuration, but the initial queue mapping is still done by having the queues spread across all the CPUs in the system, both in the init path and in the cpu_hotplug path. Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04net: amd-xgbe: Fix network fluctuations when using 1G BELFUSE SFPShyam Sundar S K1-0/+3
[ Upstream commit 9eab3fdb419916f66a72d1572f68d82cd9b3f963 ] Frequent link up/down events can happen when a Bel Fuse SFP part is connected to the amd-xgbe device. Try to avoid the frequent link issues by resetting the PHY as documented in Bel Fuse SFP datasheets. Fixes: e722ec82374b ("amd-xgbe: Update the BelFuse quirk to support SGMII") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04net: amd-xgbe: Reset link when the link never comes backShyam Sundar S K2-1/+9
[ Upstream commit 84fe68eb67f9499309cffd97c1ba269de125ff14 ] Normally, auto negotiation and reconnect should be automatically done by the hardware. But there seems to be an issue where auto negotiation has to be restarted manually. This happens because of link training and so even though still connected to the partner the link never "comes back". This needs an auto-negotiation restart. Also, a change in xgbe-mdio is needed to get ethtool to recognize the link down and get the link change message. This change is only required in a backplane connection mode. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04net: amd-xgbe: Fix NETDEV WATCHDOG transmit queue timeout warningShyam Sundar S K2-1/+1
[ Upstream commit 186edbb510bd60e748f93975989ccba25ee99c50 ] The current driver calls netif_carrier_off() late in the link tear down which can result in a netdev watchdog timeout. Calling netif_carrier_off() immediately after netif_tx_stop_all_queues() avoids the warning. ------------[ cut here ]------------ NETDEV WATCHDOG: enp3s0f2 (amd-xgbe): transmit queue 0 timed out WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:461 dev_watchdog+0x20d/0x220 Modules linked in: amd_xgbe(E) amd-xgbe 0000:03:00.2 enp3s0f2: Link is Down CPU: 3 PID: 0 Comm: swapper/3 Tainted: G E Hardware name: AMD Bilby-RV2/Bilby-RV2, BIOS RBB1202A 10/18/2019 RIP: 0010:dev_watchdog+0x20d/0x220 Code: 00 49 63 4e e0 eb 92 4c 89 e7 c6 05 c6 e2 c1 00 01 e8 e7 ce fc ff 89 d9 48 RSP: 0018:ffff90cfc28c3e88 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff90cfc28d63c0 RBP: ffff90cfb977845c R08: 0000000000000050 R09: 0000000000196018 R10: ffff90cfc28c3ef8 R11: 0000000000000000 R12: ffff90cfb9778000 R13: 0000000000000003 R14: ffff90cfb9778480 R15: 0000000000000010 FS: 0000000000000000(0000) GS:ffff90cfc28c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f240ff2d9d0 CR3: 00000001e3e0a000 CR4: 00000000003406e0 Call Trace: <IRQ> ? pfifo_fast_reset+0x100/0x100 call_timer_fn+0x2b/0x130 run_timer_softirq+0x3e8/0x440 ? enqueue_hrtimer+0x39/0x90 Fixes: e722ec82374b ("amd-xgbe: Update the BelFuse quirk to support SGMII") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04net: amd-xgbe: Reset the PHY rx data path when mailbox command timeoutShyam Sundar S K2-1/+41
[ Upstream commit 30b7edc82ec82578f4f5e6706766f0a9535617d3 ] Sometimes mailbox commands timeout when the RX data path becomes unresponsive. This prevents the submission of new mailbox commands to DXIO. This patch identifies the timeout and resets the RX data path so that the next message can be submitted properly. Fixes: 549b32af9f7c ("amd-xgbe: Simplify mailbox interface rate change code") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ibmvnic: skip send_request_unmap for timeout resetLijun Pan1-1/+6
[ Upstream commit 7d3a7b9ea59ddb223aec59b45fa1713c633aaed4 ] Timeout reset will trigger the VIOS to unmap it automatically, similarly as FAILVOER and MOBILITY events. If we unmap it in the linux side, we will see errors like "30000003: Error 4 in REQUEST_UNMAP_RSP". So, don't call send_request_unmap for timeout reset. Fixes: ed651a10875f ("ibmvnic: Updated reset handling") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ibmvnic: add memory barrier to protect long term bufferLijun Pan1-0/+5
[ Upstream commit 42557dab78edc8235aba5b441f2eb35f725a0ede ] dma_rmb() barrier is added to load the long term buffer before copying it to socket buffer; and dma_wmb() barrier is added to update the long term buffer before it being accessed by VIOS (virtual i/o server). Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Acked-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04b43: N-PHY: Fix the update of coef for the PHY revision >= 3caseColin Ian King1-1/+1
[ Upstream commit 4773acf3d4b50768bf08e9e97a204819e9ea0895 ] The documentation for the PHY update [1] states: Loop 4 times with index i If PHY Revision >= 3 Copy table[i] to coef[i] Otherwise Set coef[i] to 0 the copy of the table to coef is currently implemented the wrong way around, table is being updated from uninitialized values in coeff. Fix this by swapping the assignment around. [1] https://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreCal/ Fixes: 2f258b74d13c ("b43: N-PHY: implement restoring general configuration") Addresses-Coverity: ("Uninitialized scalar variable") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04cxgb4/chtls/cxgbit: Keeping the max ofld immediate data size same in cxgb4 ↵Ayush Sawal2-3/+11
and ulds [ Upstream commit 2355a6773a2cb0d2dce13432dde78497f1d6617b ] The Max imm data size in cxgb4 is not similar to the max imm data size in the chtls. This caused an mismatch in output of is_ofld_imm() of cxgb4 and chtls. So fixed this by keeping the max wreq size of imm data same in both chtls and cxgb4 as MAX_IMM_OFLD_TX_DATA_WR_LEN. As cxgb4's max imm. data value for ofld packets is changed to MAX_IMM_OFLD_TX_DATA_WR_LEN. Using the same in cxgbit also. Fixes: 36bedb3f2e5b8 ("crypto: chtls - Inline TLS record Tx") Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04xen/netback: fix spurious event detection for common event caseJuergen Gross1-3/+5
[ Upstream commit a3daf3d39132b405781be8d9ede0c449b244b64e ] In case of a common event for rx and tx queue the event should be regarded to be spurious if no rx and no tx requests are pending. Unfortunately the condition for testing that is wrong causing to decide a event being spurious if no rx OR no tx requests are pending. Fix that plus using local variables for rx/tx pending indicators in order to split function calls and if condition. Fixes: 23025393dbeb3b ("xen/netback: use lateeoi irq binding") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Wei Liu <wl@xen.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04bnxt_en: reverse order of TX disable and carrier offEdwin Peer1-1/+2
[ Upstream commit 132e0b65dc2b8bfa9721bfce834191f24fd1d7ed ] A TX queue can potentially immediately timeout after it is stopped and the last TX timestamp on that queue was more than 5 seconds ago with carrier still up. Prevent these intermittent false TX timeouts by bringing down carrier first before calling netif_tx_disable(). Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ibmvnic: Set to CLOSED state even on errorSukadev Bhattiprolu1-3/+1
[ Upstream commit d4083d3c00f60a09ad82e3bf17ff57fec69c8aa6 ] If set_link_state() fails for any reason, we still cleanup the adapter state and cannot recover from a partial close anyway. So set the adapter to CLOSED state. That way if a new soft/hard reset is processed, the adapter will remain in the CLOSED state until the next ibmvnic_open(). Fixes: 01d9bd792d16 ("ibmvnic: Reorganize device close") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reported-by: Abdul Haleem <abdhalee@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ath9k: fix data bus crash when setting nf_override via debugfsLinus Lüssing1-1/+4
[ Upstream commit 12c8f3d1cdd84f01ee777b756db9dddc1f1c9d17 ] When trying to set the noise floor via debugfs, a "data bus error" crash like the following can happen: [ 88.433133] Data bus error, epc == 80221c28, ra == 83314e60 [ 88.438895] Oops[#1]: [ 88.441246] CPU: 0 PID: 7263 Comm: sh Not tainted 4.14.195 #0 [ 88.447174] task: 838a1c20 task.stack: 82d5e000 [ 88.451847] $ 0 : 00000000 00000030 deadc0de 83141de4 [ 88.457248] $ 4 : b810a2c4 0000a2c4 83230fd4 00000000 [ 88.462652] $ 8 : 0000000a 00000000 00000001 00000000 [ 88.468055] $12 : 7f8ef318 00000000 00000000 77f802a0 [ 88.473457] $16 : 83230080 00000002 0000001b 83230080 [ 88.478861] $20 : 83a1c3f8 00841000 77f7adb0 ffffff92 [ 88.484263] $24 : 00000fa4 77edd860 [ 88.489665] $28 : 82d5e000 82d5fda8 00000000 83314e60 [ 88.495070] Hi : 00000000 [ 88.498044] Lo : 00000000 [ 88.501040] epc : 80221c28 ioread32+0x8/0x10 [ 88.505671] ra : 83314e60 ath9k_hw_loadnf+0x88/0x520 [ath9k_hw] [ 88.512049] Status: 1000fc03 KERNEL EXL IE [ 88.516369] Cause : 5080801c (ExcCode 07) [ 88.520508] PrId : 00019374 (MIPS 24Kc) [ 88.524556] Modules linked in: ath9k ath9k_common pppoe ppp_async l2tp_ppp cdc_mbim batman_adv ath9k_hw ath sr9700 smsc95xx sierra_net rndis_host qmi_wwan pppox ppp_generic pl2303 nf_conntrack_ipv6 mcs7830 mac80211 kalmia iptable_nat ipt_REJECT ipt_MASQUERADE huawei_cdc_ncm ftdi_sio dm9601 cfg80211 cdc_subset cdc_ncm cdc_ether cdc_eem ax88179_178a asix xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_NETMAP xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CLASSIFY usbserial usbnet usbhid slhc rtl8150 r8152 pegasus nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack [ 88.597894] libcrc32c kaweth iptable_mangle iptable_filter ipt_ECN ipheth ip_tables hso hid_generic crc_ccitt compat cdc_wdm cdc_acm br_netfilter hid evdev input_core nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 l2tp_netlink l2tp_core udp_tunnel ip6_udp_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_beet ipcomp6 xfrm6_tunnel esp6 ah6 xfrm4_tunnel xfrm4_mode_tunnel xfrm4_mode_transport xfrm4_mode_beet ipcomp esp4 ah4 tunnel6 tunnel4 tun xfrm_user xfrm_ipcomp af_key xfrm_algo sha256_generic sha1_generic jitterentropy_rng drbg md5 hmac echainiv des_generic deflate zlib_inflate zlib_deflate cbc authenc crypto_acompress ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc16 mii aead crypto_null cryptomgr crc32c_generic [ 88.671671] crypto_hash [ 88.674292] Process sh (pid: 7263, threadinfo=82d5e000, task=838a1c20, tls=77f81efc) [ 88.682279] Stack : 00008060 00000008 00000200 00000000 00000000 00000000 00000000 00000002 [ 88.690916] 80500000 83230080 82d5fe22 00841000 77f7adb0 00000000 00000000 83156858 [ 88.699553] 00000000 8352fa00 83ad62b0 835302a8 00000000 300a00f8 00000003 82d5fe38 [ 88.708190] 82d5fef4 00000001 77f54dc4 77f80000 77f7adb0 c79fe901 00000000 00000000 [ 88.716828] 80510000 00000002 00841000 77f54dc4 77f80000 801ce4cc 0000000b 41824292 [ 88.725465] ... [ 88.727994] Call Trace: [ 88.730532] [<80221c28>] ioread32+0x8/0x10 [ 88.734765] Code: 00000000 8c820000 0000000f <03e00008> 00000000 08088708 00000000 aca40000 03e00008 [ 88.744846] [ 88.746464] ---[ end trace db226b2de1b69b9e ]--- [ 88.753477] Kernel panic - not syncing: Fatal exception [ 88.759981] Rebooting in 3 seconds.. The "REG_READ(ah, AR_PHY_AGC_CONTROL)" in ath9k_hw_loadnf() does not like being called when the hardware is asleep, leading to this crash. The easiest way to reproduce this is trying to set nf_override while the hardware is down: $ ip link set down dev wlan0 $ echo "-85" > /sys/kernel/debug/ieee80211/phy0/ath9k/nf_override Fixing this crash by waking the hardware up before trying to set the noise floor. Similar to what other ath9k debugfs files do. Tested on a Lima board from 8devices, which has a QCA 4531 chipset. Fixes: b90189759a7f ("ath9k: add noise floor override option") Cc: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210209184352.4272-1-linus.luessing@c0d3.blue Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04ath10k: Fix error handling in case of CE pipe init failureRakesh Pillai1-2/+3
[ Upstream commit 31561e8557cd1eeba5806ac9ce820f8323b2201b ] Currently if the copy engine pipe init fails for snoc based chipsets, the rri is not freed. Fix this error handling for copy engine pipe init failure. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1 Fixes: 4945af5b264f ("ath10k: enable SRRI/DRRI support on ddr for WCN3990") Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1607713210-18320-1-git-send-email-pillair@codeaurora.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04NET: usb: qmi_wwan: Adding support for Cinterion MV31Christoph Schemmel1-0/+1
[ Upstream commit a4dc7eee9106a9d2a6e08b442db19677aa9699c7 ] Adding support for Cinterion MV31 with PID 0x00B7. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00b7 Rev=04.14 S: Manufacturer=Cinterion S: Product=Cinterion USB Mobile Broadband S: SerialNumber=b3246eed C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by: Christoph Schemmel <christoph.schemmel@gmail.com> Link: https://lore.kernel.org/r/20210202084523.4371-1-christoph.schemmel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-23xen-netback: don't "handle" error by BUG()Jan Beulich1-3/+1
commit 3194a1746e8aabe86075fd3c5e7cf1f4632d7f16 upstream. In particular -ENOMEM may come back here, from set_foreign_p2m_mapping(). Don't make problems worse, the more that handling elsewhere (together with map's status fields now indicating whether a mapping wasn't even attempted, and hence has to be considered failed) doesn't require this odd way of dealing with errors. This is part of XSA-362. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-23net: hns3: add a check for queue_id in hclge_reset_vf_queue()Yufeng Mo1-0/+7
[ Upstream commit 67a69f84cab60484f02eb8cbc7a76edffbb28a25 ] The queue_id is received from vf, if use it directly, an out-of-bound issue may be caused, so add a check for this queue_id before using it in hclge_reset_vf_queue(). Fixes: 1a426f8b40fc ("net: hns3: fix the VF queue reset flow error") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-23net: stmmac: set TxQ mode back to DCB after disabling CBSMohammad Athari Bin Ismail1-1/+6
[ Upstream commit f317e2ea8c88737aa36228167b2292baef3f0430 ] When disable CBS, mode_to_use parameter is not updated even the operation mode of Tx Queue is changed to Data Centre Bridging (DCB). Therefore, when tc_setup_cbs() function is called to re-enable CBS, the operation mode of Tx Queue remains at DCB, which causing CBS fails to work. This patch updates the value of mode_to_use parameter to MTL_QUEUE_DCB after operation mode of Tx Queue is changed to DCB in stmmac_dma_qmode() callback function. Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC") Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: Song, Yoong Siang <yoong.siang.song@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/1612447396-20351-1-git-send-email-yoong.siang.song@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-23xen/netback: avoid race in xenvif_rx_ring_slots_available()Juergen Gross1-1/+8
[ Upstream commit ec7d8e7dd3a59528e305a18e93f1cb98f7faf83b ] Since commit 23025393dbeb3b8b3 ("xen/netback: use lateeoi irq binding") xenvif_rx_ring_slots_available() is no longer called only from the rx queue kernel thread, so it needs to access the rx queue with the associated queue held. Reported-by: Igor Druzhinin <igor.druzhinin@citrix.com> Fixes: 23025393dbeb3b8b3 ("xen/netback: use lateeoi irq binding") Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Wei Liu <wl@xen.org> Link: https://lore.kernel.org/r/20210202070938.7863-1-jgross@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-23mt76: dma: fix a possible memory leak in mt76_add_fragment()Lorenzo Bianconi1-3/+5
[ Upstream commit 93a1d4791c10d443bc67044def7efee2991d48b7 ] Fix a memory leak in mt76_add_fragment routine returning the buffer to the page_frag_cache when we receive a new fragment and the skb_shared_info frag array is full. Fixes: b102f0c522cf6 ("mt76: fix array overflow on receiving too many fragments for a packet") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/4f9dd73407da88b2a552517ce8db242d86bf4d5c.1611616130.git.lorenzo@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13iwlwifi: mvm: guard against device removal in reprobeJohannes Berg1-1/+2
[ Upstream commit 7a21b1d4a728a483f07c638ccd8610d4b4f12684 ] If we get into a problem severe enough to attempt a reprobe, we schedule a worker to do that. However, if the problem gets more severe and the device is actually destroyed before this worker has a chance to run, we use a free device. Bump up the reference count of the device until the worker runs to avoid this situation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.871f0892e4b2.I94819e11afd68d875f3e242b98bef724b8236f1e@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13iwlwifi: pcie: fix context info memory leakJohannes Berg1-2/+9
[ Upstream commit 2d6bc752cc2806366d9a4fd577b3f6c1f7a7e04e ] If the image loader allocation fails, we leak all the previously allocated memory. Fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.97172cbaa67c.I3473233d0ad01a71aa9400832fb2b9f494d88a11@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmapEmmanuel Grumbach1-0/+5
[ Upstream commit 98c7d21f957b10d9c07a3a60a3a5a8f326a197e5 ] I hit a NULL pointer exception in this function when the init flow went really bad. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.2e8da9f2c132.I0234d4b8ddaf70aaa5028a20c863255e05bc1f84@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13iwlwifi: mvm: take mutex for calling iwl_mvm_get_sync_time()Johannes Berg1-0/+3
[ Upstream commit 5c56d862c749669d45c256f581eac4244be00d4d ] We need to take the mutex to call iwl_mvm_get_sync_time(), do it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.4bb5ccf881a6.I62973cbb081e80aa5b0447a5c3b9c3251a65cf6b@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-10net: dsa: mv88e6xxx: override existent unicast portvec in port_fdb_addDENG Qingfang1-1/+5
commit f72f2fb8fb6be095b98af5d740ac50cffd0b0cae upstream. Having multiple destination ports for a unicast address does not make sense. Make port_db_load_purge override existent unicast portvec instead of adding a new port bit. Fixes: 884729399260 ("net: dsa: mv88e6xxx: handle multiple ports in ATU") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20210130134334.10243-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10net: mvpp2: TCAM entry enable should be written after SRAM dataStefan Chulski1-5/+5
[ Upstream commit 43f4a20a1266d393840ce010f547486d14cc0071 ] Last TCAM data contains TCAM enable bit. It should be written after SRAM data before entry enabled. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1612172139-28343-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-07ibmvnic: Ensure that CRQ entry read are correctly orderedLijun Pan1-0/+6
commit e41aec79e62fa50f940cf222d1e9577f14e149dc upstream. Ensure that received Command-Response Queue (CRQ) entries are properly read in order by the driver. dma_rmb barrier has been added before accessing the CRQ descriptor to ensure the entire descriptor is read before processing. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20210128013442.88319-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-07net: dsa: bcm_sf2: put device node before returnPan Bian1-2/+6
commit cf3c46631e1637582f517a574c77cd6c05793817 upstream. Put the device node dn before return error code on failure path. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121123343.26330-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-04team: protect features update by RCU to avoid deadlockIvan Vecera1-3/+3
commit f0947d0d21b219e03940b9be6628a43445c0de7a upstream. Function __team_compute_features() is protected by team->lock mutex when it is called from team_compute_features() used when features of an underlying device is changed. This causes a deadlock when NETDEV_FEAT_CHANGE notifier for underlying device is fired due to change propagated from team driver (e.g. MTU change). It's because callbacks like team_change_mtu() or team_vlan_rx_{add,del}_vid() protect their port list traversal by team->lock mutex. Example (r8169 case where this driver disables TSO for certain MTU values): ... [ 6391.348202] __mutex_lock.isra.6+0x2d0/0x4a0 [ 6391.358602] team_device_event+0x9d/0x160 [team] [ 6391.363756] notifier_call_chain+0x47/0x70 [ 6391.368329] netdev_update_features+0x56/0x60 [ 6391.373207] rtl8169_change_mtu+0x14/0x50 [r8169] [ 6391.378457] dev_set_mtu_ext+0xe1/0x1d0 [ 6391.387022] dev_set_mtu+0x52/0x90 [ 6391.390820] team_change_mtu+0x64/0xf0 [team] [ 6391.395683] dev_set_mtu_ext+0xe1/0x1d0 [ 6391.399963] do_setlink+0x231/0xf50 ... In fact team_compute_features() called from team_device_event() does not need to be protected by team->lock mutex and rcu_read_lock() is sufficient there for port list traversal. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Cc: Saeed Mahameed <saeed@kernel.org> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20210125074416.4056484-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-04can: dev: prevent potential information leak in can_fill_info()Dan Carpenter1-1/+1
[ Upstream commit b552766c872f5b0d90323b24e4c9e8fa67486dd5 ] The "bec" struct isn't necessarily always initialized. For example, the mcp251xfd_get_berr_counter() function doesn't initialize anything if the interface is down. Fixes: 52c793f24054 ("can: netlink support for bus-error reporting and counters") Link: https://lore.kernel.org/r/YAkaRdRJncsJO8Ve@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-04net/mlx5: Fix memory leak on flow table creation error flowRoi Dayan1-0/+1
[ Upstream commit 487c6ef81eb98d0a43cb08be91b1fcc9b4250626 ] When we create the ft object we also init rhltable in ft->fgs_hash. So in error flow before kfree of ft we need to destroy that rhltable. Fixes: 693c6883bbc4 ("net/mlx5: Add hash table for flow groups in flow table") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-04iwlwifi: pcie: reschedule in long-running memory readsJohannes Berg1-1/+7
[ Upstream commit 3d372c4edfd4dffb7dea71c6b096fb414782b776 ] If we spin for a long time in memory reads that (for some reason in hardware) take a long time, then we'll eventually get messages such as watchdog: BUG: soft lockup - CPU#2 stuck for 24s! [kworker/2:2:272] This is because the reading really does take a very long time, and we don't schedule, so we're hogging the CPU with this task, at least if CONFIG_PREEMPT is not set, e.g. with CONFIG_PREEMPT_VOLUNTARY=y. Previously I misinterpreted the situation and thought that this was only going to happen if we had interrupts disabled, and then fixed this (which is good anyway, however), but that didn't always help; looking at it again now I realized that the spin unlock will only reschedule if CONFIG_PREEMPT is used. In order to avoid this issue, change the code to cond_resched() if we've been spinning for too long here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 04516706bb99 ("iwlwifi: pcie: limit memory read spin time") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130253.217a9d6a6a12.If964cb582ab0aaa94e81c4ff3b279eaafda0fd3f@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-04iwlwifi: pcie: use jiffies for memory read spin time limitJohannes Berg1-6/+2
[ Upstream commit 6701317476bbfb1f341aa935ddf75eb73af784f9 ] There's no reason to use ktime_get() since we don't need any better precision than jiffies, and since we no longer disable interrupts around this code (when grabbing NIC access), jiffies will work fine. Use jiffies instead of ktime_get(). This cleanup is preparation for the following patch "iwlwifi: pcie: reschedule in long-running memory reads". The code gets simpler with the weird clock use etc. removed before we add cond_resched(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130253.621c948b1fad.I3ee9f4bc4e74a0c9125d42fb7c35cd80df4698a1@changeid Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-17 19:22:02 +0300