summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2023-06-16Merge tag 'net-6.4-rc7' of ↵Linus Torvalds25-102/+151
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, and netfilter. Selftests excluded - we have 58 patches and diff of +442/-199, which isn't really small but perhaps with the exception of the WiFi locking change it's old(ish) bugs. We have no known problems with v6.4. The selftest changes are rather large as MPTCP folks try to apply Greg's guidance that selftest from torvalds/linux should be able to run against stable kernels. Last thing I should call out is the DCCP/UDP-lite deprecation notices. We are fairly sure those are dead, but if we're wrong reverting them back in won't be fun. Current release - regressions: - wifi: - cfg80211: fix double lock bug in reg_wdev_chan_valid() - iwlwifi: mvm: spin_lock_bh() to fix lockdep regression Current release - new code bugs: - handshake: remove fput() that causes use-after-free Previous releases - regressions: - sched: cls_u32: fix reference counter leak leading to overflow - sched: cls_api: fix lockup on flushing explicitly created chain Previous releases - always broken: - nf_tables: integrate pipapo into commit protocol - nf_tables: incorrect error path handling with NFT_MSG_NEWRULE, fix dangling pointer on failure - ping6: fix send to link-local addresses with VRF - sched: act_pedit: parse L3 header for L4 offset, the skb may not have the offset saved - sched: act_ct: fix promotion of offloaded unreplied tuple - sched: refuse to destroy an ingress and clsact Qdiscs if there are lockless change operations in flight - wifi: mac80211: fix handful of bugs in multi-link operation - ipvlan: fix bound dev checking for IPv6 l3s mode - eth: enetc: correct the indexes of highest and 2nd highest TCs - eth: ice: fix XDP memory leak when NIC is brought up and down Misc: - add deprecation notices for UDP-lite and DCCP - selftests: mptcp: skip tests not supported by old kernels - sctp: handle invalid error codes without calling BUG()" * tag 'net-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) dccp: Print deprecation notice. udplite: Print deprecation notice. octeon_ep: Add missing check for ioremap selftests/ptp: Fix timestamp printf format for PTP_SYS_OFFSET net: ethernet: stmicro: stmmac: fix possible memory leak in __stmmac_open net: tipc: resize nlattr array to correct size sfc: fix XDP queues mode with legacy IRQ net: macsec: fix double free of percpu stats net: lapbether: only support ethernet devices MAINTAINERS: add reviewers for SMC Sockets s390/ism: Fix trying to free already-freed IRQ by repeated ism_dev_exit() net: dsa: felix: fix taprio guard band overflow at 10Mbps with jumbo frames net/sched: cls_api: Fix lockup on flushing explicitly created chain ice: Fix ice module unload net/handshake: remove fput() that causes use-after-free selftests: forwarding: hw_stats_l3: Set addrgenmode in a separate step net/sched: qdisc_destroy() old ingress and clsact Qdiscs before grafting net/sched: Refactor qdisc_graft() for ingress and clsact Qdiscs net/sched: act_ct: Fix promotion of offloaded unreplied tuple wifi: iwlwifi: mvm: spin_lock_bh() to fix lockdep regression ...
2023-06-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-12/+0
Pull rdma fixes from Jason Gunthorpe: "This is an unusually large bunch of bug fixes for the later rc cycle, rxe and mlx5 both dumped a lot of things at once. rxe continues to fix itself, and mlx5 is fixing a bunch of "queue counters" related bugs. There is one highly notable bug fix regarding the qkey. This small security check was missed in the original 2005 implementation and it allows some significant issues. Summary: - Two rtrs bug fixes for error unwind bugs - Several rxe bug fixes: * Incorrect Rx packet validation * Using memory without a refcount * Syzkaller found use before initialization * Regression fix for missing locking with the tasklet conversion from this merge window - Have bnxt report the correct link properties to userspace, this was a regression in v6.3 - Several mlx5 bug fixes: * Kernel crash triggerable by userspace for the RAW ethernet profile * Defend against steering refcounting issues created by userspace * Incorrect change of QP port affinity parameters in some LAG configurations - Fix mlx5 Q counters: * Do not over allocate Q counters to allow userspace to use the full port capacity * Kernel crash triggered by eswitch due to mis-use of Q counters * Incorrect mlx5_device for Q counters in some LAG configurations - Properly implement the IBA spec restricting privileged qkeys to root - Always an error when reading from a disassociated device's event queue - isert bug fixes: * Avoid a deadlock with the CM handler and CM ID destruction * Correct list corruption due to incorrect locking * Fix a use after free around connection tear down" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/rxe: Fix rxe_cq_post IB/isert: Fix incorrect release of isert connection IB/isert: Fix possible list corruption in CMA handler IB/isert: Fix dead lock in ib_isert RDMA/mlx5: Fix affinity assignment IB/uverbs: Fix to consider event queue closing also upon non-blocking mode RDMA/uverbs: Restrict usage of privileged QKEYs RDMA/cma: Always set static rate to 0 for RoCE RDMA/mlx5: Fix Q-counters query in LAG mode RDMA/mlx5: Remove vport Q-counters dependency on normal Q-counters RDMA/mlx5: Fix Q-counters per vport allocation RDMA/mlx5: Create an indirect flow table for steering anchor RDMA/mlx5: Initiate dropless RQ for RAW Ethernet functions RDMA/rxe: Fix the use-before-initialization error of resp_pkts RDMA/bnxt_re: Fix reporting active_{speed,width} attributes RDMA/rxe: Fix ref count error in check_rkey() RDMA/rxe: Fix packet length checks RDMA/rtrs: Fix rxe_dealloc_pd warning RDMA/rtrs: Fix the last iu->buf leak in err path
2023-06-16octeon_ep: Add missing check for ioremapJiasheng Jiang1-1/+6
Add check for ioremap() and return the error if it fails in order to guarantee the success of ioremap(). Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://lore.kernel.org/r/20230615033400.2971-1-jiasheng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-16net: ethernet: stmicro: stmmac: fix possible memory leak in __stmmac_openChristian Marangi1-2/+7
Fix a possible memory leak in __stmmac_open when stmmac_init_phy fails. It's also needed to free everything allocated by stmmac_setup_dma_desc and not just the dma_conf struct. Drop free_dma_desc_resources from __stmmac_open and correctly call free_dma_desc_resources on each user of __stmmac_open on error. Reported-by: Jose Abreu <Jose.Abreu@synopsys.com> Fixes: ba39b344e924 ("net: ethernet: stmicro: stmmac: generate stmmac dma conf before open") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> Link: https://lore.kernel.org/r/20230614091714.15912-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15sfc: fix XDP queues mode with legacy IRQÍñigo Huguet2-0/+4
In systems without MSI-X capabilities, xdp_txq_queues_mode is calculated in efx_allocate_msix_channels, but when enabling MSI-X fails, it was not changed to a proper default value. This was leading to the driver thinking that it has dedicated XDP queues, when it didn't. Fix it by setting xdp_txq_queues_mode to the correct value if the driver fallbacks to MSI or legacy IRQ mode. The correct value is EFX_XDP_TX_QUEUES_BORROWED because there are no XDP dedicated queues. The issue can be easily visible if the kernel is started with pci=nomsi, then a call trace is shown. It is not shown only with sfc's modparam interrupt_mode=2. Call trace example: WARNING: CPU: 2 PID: 663 at drivers/net/ethernet/sfc/efx_channels.c:828 efx_set_xdp_channels+0x124/0x260 [sfc] [...skip...] Call Trace: <TASK> efx_set_channels+0x5c/0xc0 [sfc] efx_probe_nic+0x9b/0x15a [sfc] efx_probe_all+0x10/0x1a2 [sfc] efx_pci_probe_main+0x12/0x156 [sfc] efx_pci_probe_post_io+0x18/0x103 [sfc] efx_pci_probe.cold+0x154/0x257 [sfc] local_pci_probe+0x42/0x80 Fixes: 6215b608a8c4 ("sfc: last resort fallback for lack of xdp tx queues") Reported-by: Yanghang Liu <yanghliu@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15net: macsec: fix double free of percpu statsFedor Pchelkin1-7/+5
Inside macsec_add_dev() we free percpu macsec->secy.tx_sc.stats and macsec->stats on some of the memory allocation failure paths. However, the net_device is already registered to that moment: in macsec_newlink(), just before calling macsec_add_dev(). This means that during unregister process its priv_destructor - macsec_free_netdev() - will be called and will free the stats again. Remove freeing percpu stats inside macsec_add_dev() because macsec_free_netdev() will correctly free the already allocated ones. The pointers to unallocated stats stay NULL, and free_percpu() treats that correctly. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15net: lapbether: only support ethernet devicesEric Dumazet1-0/+3
It probbaly makes no sense to support arbitrary network devices for lapbether. syzbot reported: skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1 kernel BUG at net/core/skbuff.c:200 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:196 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 lr : skb_panic net/core/skbuff.c:196 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 sp : ffff8000973b7260 x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000 x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0 x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001 x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00 x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4 x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:196 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 skb_push+0xf0/0x108 net/core/skbuff.c:2409 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383 dev_hard_header include/linux/netdevice.h:3137 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 lapb_establish_data_link+0x94/0xec lapb_device_event+0x348/0x4e0 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 __dev_notify_flags+0x2bc/0x544 dev_change_flags+0xd0/0x15c net/core/dev.c:8643 devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150 inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979 sock_do_ioctl+0x134/0x2dc net/socket.c:1201 sock_ioctl+0x4ec/0x858 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191 el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15net: dsa: felix: fix taprio guard band overflow at 10Mbps with jumbo framesVladimir Oltean1-1/+1
The DEV_MAC_MAXLEN_CFG register contains a 16-bit value - up to 65535. Plus 2 * VLAN_HLEN (4), that is up to 65543. The picos_per_byte variable is the largest when "speed" is lowest - SPEED_10 = 10. In that case it is (1000000L * 8) / 10 = 800000. Their product - 52434400000 - exceeds 32 bits, which is a problem, because apparently, a multiplication between two 32-bit factors is evaluated as 32-bit before being assigned to a 64-bit variable. In fact it's a problem for any MTU value larger than 5368. Cast one of the factors of the multiplication to u64 to force the multiplication to take place on 64 bits. Issue found by Coverity. Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230613170907.2413559-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15ice: Fix ice module unloadJakub Buchocki1-11/+5
Clearing the interrupt scheme before PFR reset, during the removal routine, could cause the hardware errors and possibly lead to system reboot, as the PF reset can cause the interrupt to be generated. Place the call for PFR reset inside ice_deinit_dev(), wait until reset and all pending transactions are done, then call ice_clear_interrupt_scheme(). This introduces a PFR reset to multiple error paths. Additionally, remove the call for the reset from ice_load() - it will be a part of ice_unload() now. Error example: [ 75.229328] ice 0000:ca:00.1: Failed to read Tx Scheduler Tree - User Selection data from flash [ 77.571315] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [ 77.571418] {1}[Hardware Error]: event severity: recoverable [ 77.571459] {1}[Hardware Error]: Error 0, type: recoverable [ 77.571500] {1}[Hardware Error]: section_type: PCIe error [ 77.571540] {1}[Hardware Error]: port_type: 4, root port [ 77.571580] {1}[Hardware Error]: version: 3.0 [ 77.571615] {1}[Hardware Error]: command: 0x0547, status: 0x4010 [ 77.571661] {1}[Hardware Error]: device_id: 0000:c9:02.0 [ 77.571703] {1}[Hardware Error]: slot: 25 [ 77.571736] {1}[Hardware Error]: secondary_bus: 0xca [ 77.571773] {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x347a [ 77.571821] {1}[Hardware Error]: class_code: 060400 [ 77.571858] {1}[Hardware Error]: bridge: secondary_status: 0x2800, control: 0x0013 [ 77.572490] pcieport 0000:c9:02.0: AER: aer_status: 0x00200000, aer_mask: 0x00100020 [ 77.572870] pcieport 0000:c9:02.0: [21] ACSViol (First) [ 77.573222] pcieport 0000:c9:02.0: AER: aer_layer=Transaction Layer, aer_agent=Receiver ID [ 77.573554] pcieport 0000:c9:02.0: AER: aer_uncor_severity: 0x00463010 [ 77.691273] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [ 77.691738] {2}[Hardware Error]: event severity: recoverable [ 77.691971] {2}[Hardware Error]: Error 0, type: recoverable [ 77.692192] {2}[Hardware Error]: section_type: PCIe error [ 77.692403] {2}[Hardware Error]: port_type: 4, root port [ 77.692616] {2}[Hardware Error]: version: 3.0 [ 77.692825] {2}[Hardware Error]: command: 0x0547, status: 0x4010 [ 77.693032] {2}[Hardware Error]: device_id: 0000:c9:02.0 [ 77.693238] {2}[Hardware Error]: slot: 25 [ 77.693440] {2}[Hardware Error]: secondary_bus: 0xca [ 77.693641] {2}[Hardware Error]: vendor_id: 0x8086, device_id: 0x347a [ 77.693853] {2}[Hardware Error]: class_code: 060400 [ 77.694054] {2}[Hardware Error]: bridge: secondary_status: 0x0800, control: 0x0013 [ 77.719115] pci 0000:ca:00.1: AER: can't recover (no error_detected callback) [ 77.719140] pcieport 0000:c9:02.0: AER: device recovery failed [ 77.719216] pcieport 0000:c9:02.0: AER: aer_status: 0x00200000, aer_mask: 0x00100020 [ 77.719390] pcieport 0000:c9:02.0: [21] ACSViol (First) [ 77.719557] pcieport 0000:c9:02.0: AER: aer_layer=Transaction Layer, aer_agent=Receiver ID [ 77.719723] pcieport 0000:c9:02.0: AER: aer_uncor_severity: 0x00463010 Fixes: 5b246e533d01 ("ice: split probe into smaller functions") Signed-off-by: Jakub Buchocki <jakubx.buchocki@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230612171421.21570-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15Merge branch '1GbE' of ↵Jakub Kicinski2-1/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-06-12 (igc, igb) This series contains updates to igc and igb drivers. Husaini clears Tx rings when interface is brought down for igc. Vinicius disables PTM and PCI busmaster when removing igc driver. Alex adds error check and path for NVM read error on igb. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igb: fix nvm.ops.read() error handling igc: Fix possible system crash when loading module igc: Clean the TX buffer and TX descriptor ring ==================== Link: https://lore.kernel.org/r/20230612205208.115292-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15Merge tag 'wireless-2023-06-14' of ↵Jakub Kicinski1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== A couple of straggler fixes, mostly in the stack: - fix fragmentation for multi-link related elements - fix callback copy/paste error - fix multi-link locking - remove double-locking of wiphy mutex - transmit only on active links, not all - activate links in the correct order - don't remove links that weren't added - disable soft-IRQs for LQ lock in iwlwifi * tag 'wireless-2023-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: mvm: spin_lock_bh() to fix lockdep regression wifi: mac80211: fragment per STA profile correctly wifi: mac80211: Use active_links instead of valid_links in Tx wifi: cfg80211: remove links only on AP wifi: mac80211: take lock before setting vif links wifi: cfg80211: fix link del callback to call correct handler wifi: mac80211: fix link activation settings order wifi: cfg80211: fix double lock bug in reg_wdev_chan_valid() ==================== Link: https://lore.kernel.org/r/20230614075502.11765-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-14wifi: iwlwifi: mvm: spin_lock_bh() to fix lockdep regressionHugh Dickins1-6/+6
Lockdep on 6.4-rc on ThinkPad X1 Carbon 5th says ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected 6.4.0-rc5 #1 Not tainted ----------------------------------------------------- kworker/3:1/49 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire: ffff8881066fa368 (&mvm_sta->deflink.lq_sta.rs_drv.pers.lock){+.+.}-{2:2}, at: rs_drv_get_rate+0x46/0xe7 and this task is already holding: ffff8881066f80a8 (&sta->rate_ctrl_lock){+.-.}-{2:2}, at: rate_control_get_rate+0xbd/0x126 which would create a new lock dependency: (&sta->rate_ctrl_lock){+.-.}-{2:2} -> (&mvm_sta->deflink.lq_sta.rs_drv.pers.lock){+.+.}-{2:2} but this new dependency connects a SOFTIRQ-irq-safe lock: (&sta->rate_ctrl_lock){+.-.}-{2:2} etc. etc. etc. Changing the spin_lock() in rs_drv_get_rate() to spin_lock_bh() was not enough to pacify lockdep, but changing them all on pers.lock has worked. Fixes: a8938bc881d2 ("wifi: iwlwifi: mvm: Add locking to the rate read flow") Signed-off-by: Hugh Dickins <hughd@google.com> Link: https://lore.kernel.org/r/79ffcc22-9775-cb6d-3ffd-1a517c40beef@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-14net: ethernet: ti: am65-cpsw: Call of_node_put() on error pathDan Carpenter1-1/+1
This code returns directly but it should instead call of_node_put() to drop some reference counts. Fixes: dab2b265dd23 ("net: ethernet: ti: am65-cpsw: Add support for SERDES configuration") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/e3012f0c-1621-40e6-bf7d-03c276f6e07f@kili.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-13net: phylink: use a dedicated helper to parse usgmii control wordMaxime Chevallier1-1/+38
Q-USGMII is a derivative of USGMII, that uses a specific formatting for the control word. The layout is close to the USXGMII control word, but doesn't support speeds over 1Gbps. Use a dedicated decoding logic for the USGMII control word, re-using USXGMII definitions but only considering 10/100/1000Mbps speeds Fixes: 5e61fe157a27 ("net: phy: Introduce QUSGMII PHY mode") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-13net: phylink: report correct max speed for QUSGMIIMaxime Chevallier1-1/+1
Q-USGMII is the quad port version of USGMII, and supports a max speed of 1Gbps on each line. Make so that phylink_interface_max_speed() reports this information correctly. Fixes: ae0e4bb2a0e0 ("net: phylink: Adjust link settings based on rate matching") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12igb: fix nvm.ops.read() error handlingAleksandr Loktionov1-0/+3
Add error handling into igb_set_eeprom() function, in case nvm.ops.read() fails just quit with error code asap. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-12igc: Fix possible system crash when loading moduleVinicius Costa Gomes1-0/+3
Guarantee that when probe() is run again, PTM and PCI busmaster will be in the same state as it was if the driver was never loaded. Avoid an i225/i226 hardware issue that PTM requests can be made even though PCI bus mastering is not enabled. These unexpected PTM requests can crash some systems. So, "force" disable PTM and busmastering before removing the driver, so they can be re-enabled in the right order during probe(). This is more like a workaround and should be applicable for i225 and i226, in any platform. Fixes: 1b5d73fb8624 ("igc: Enable PCIe PTM") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-12igc: Clean the TX buffer and TX descriptor ringMuhammad Husaini Zulkifli1-1/+8
There could be a race condition during link down where interrupt being generated and igc_clean_tx_irq() been called to perform the TX completion. Properly clear the TX buffer/descriptor ring and disable the TX Queue ring in igc_free_tx_resources() to avoid that. Kernel trace: [ 108.237177] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLIFUI1.R00.4204.A00.2105270302 05/27/2021 [ 108.237178] RIP: 0010:refcount_warn_saturate+0x55/0x110 [ 108.242143] RSP: 0018:ffff9e7980003db0 EFLAGS: 00010286 [ 108.245555] Code: 84 bc 00 00 00 c3 cc cc cc cc 85 f6 74 46 80 3d 20 8c 4d 01 00 75 ee 48 c7 c7 88 f4 03 ab c6 05 10 8c 4d 01 01 e8 0b 10 96 ff <0f> 0b c3 cc cc cc cc 80 3d fc 8b 4d 01 00 75 cb 48 c7 c7 b0 f4 03 [ 108.250434] [ 108.250434] RSP: 0018:ffff9e798125f910 EFLAGS: 00010286 [ 108.254358] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 108.259325] [ 108.259325] RAX: 0000000000000000 RBX: ffff8ddb935b8000 RCX: 0000000000000027 [ 108.261868] RDX: ffff8de250a28800 RSI: ffff8de250a1c580 RDI: ffff8de250a1c580 [ 108.265538] RDX: 0000000000000027 RSI: 0000000000000002 RDI: ffff8de250a9c588 [ 108.265539] RBP: ffff8ddb935b8000 R08: ffffffffab2655a0 R09: ffff9e798125f898 [ 108.267914] RBP: ffff8ddb8a5b8d80 R08: 0000005648eba354 R09: 0000000000000000 [ 108.270196] R10: 0000000000000001 R11: 000000002d2d2d2d R12: ffff9e798125f948 [ 108.270197] R13: ffff9e798125fa1c R14: ffff8ddb8a5b8d80 R15: 7fffffffffffffff [ 108.273001] R10: 000000002d2d2d2d R11: 000000002d2d2d2d R12: ffff8ddb8a5b8ed4 [ 108.276410] FS: 00007f605851b740(0000) GS:ffff8de250a80000(0000) knlGS:0000000000000000 [ 108.280597] R13: 00000000000002ac R14: 00000000ffffff99 R15: ffff8ddb92561b80 [ 108.282966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 108.282967] CR2: 00007f053c039248 CR3: 0000000185850003 CR4: 0000000000f70ee0 [ 108.286206] FS: 0000000000000000(0000) GS:ffff8de250a00000(0000) knlGS:0000000000000000 [ 108.289701] PKRU: 55555554 [ 108.289702] Call Trace: [ 108.289704] <TASK> [ 108.293977] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 108.297562] sock_alloc_send_pskb+0x20c/0x240 [ 108.301494] CR2: 00007f053c03a168 CR3: 0000000184394002 CR4: 0000000000f70ef0 [ 108.301495] PKRU: 55555554 [ 108.306464] __ip_append_data.isra.0+0x96f/0x1040 [ 108.309441] Call Trace: [ 108.309443] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 108.314927] <IRQ> [ 108.314928] sock_wfree+0x1c7/0x1d0 [ 108.318078] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 108.320276] skb_release_head_state+0x32/0x90 [ 108.324812] ip_make_skb+0xf6/0x130 [ 108.327188] skb_release_all+0x16/0x40 [ 108.330775] ? udp_sendmsg+0x9f3/0xcb0 [ 108.332626] napi_consume_skb+0x48/0xf0 [ 108.334134] ? xfrm_lookup_route+0x23/0xb0 [ 108.344285] igc_poll+0x787/0x1620 [igc] [ 108.346659] udp_sendmsg+0x9f3/0xcb0 [ 108.360010] ? ttwu_do_activate+0x40/0x220 [ 108.365237] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 108.366744] ? try_to_wake_up+0x289/0x5e0 [ 108.376987] ? sock_sendmsg+0x81/0x90 [ 108.395698] ? __pfx_process_timeout+0x10/0x10 [ 108.395701] sock_sendmsg+0x81/0x90 [ 108.409052] __napi_poll+0x29/0x1c0 [ 108.414279] ____sys_sendmsg+0x284/0x310 [ 108.419507] net_rx_action+0x257/0x2d0 [ 108.438216] ___sys_sendmsg+0x7c/0xc0 [ 108.439723] __do_softirq+0xc1/0x2a8 [ 108.444950] ? finish_task_switch+0xb4/0x2f0 [ 108.452077] irq_exit_rcu+0xa9/0xd0 [ 108.453584] ? __schedule+0x372/0xd00 [ 108.460713] common_interrupt+0x84/0xa0 [ 108.467840] ? clockevents_program_event+0x95/0x100 [ 108.474968] </IRQ> [ 108.482096] ? do_nanosleep+0x88/0x130 [ 108.489224] <TASK> [ 108.489225] asm_common_interrupt+0x26/0x40 [ 108.496353] ? __rseq_handle_notify_resume+0xa9/0x4f0 [ 108.503478] RIP: 0010:cpu_idle_poll+0x2c/0x100 [ 108.510607] __sys_sendmsg+0x5d/0xb0 [ 108.518687] Code: 05 e1 d9 c8 00 65 8b 15 de 64 85 55 85 c0 7f 57 e8 b9 ef ff ff fb 65 48 8b 1c 25 00 cc 02 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 77 63 cd 00 85 c0 75 ed e8 ce ec ff ff [ 108.525817] do_syscall_64+0x44/0xa0 [ 108.531563] RSP: 0018:ffffffffab203e70 EFLAGS: 00000202 [ 108.538693] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 108.546775] [ 108.546777] RIP: 0033:0x7f605862b7f7 [ 108.549495] RAX: 0000000000000001 RBX: ffffffffab20c940 RCX: 000000000000003b [ 108.551955] Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 108.554068] RDX: 4000000000000000 RSI: 000000002da97f6a RDI: 00000000002b8ff4 [ 108.559816] RSP: 002b:00007ffc99264058 EFLAGS: 00000246 [ 108.564178] RBP: 0000000000000000 R08: 00000000002b8ff4 R09: ffff8ddb01554c80 [ 108.571302] ORIG_RAX: 000000000000002e [ 108.571303] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f605862b7f7 [ 108.574023] R10: 000000000000015b R11: 000000000000000f R12: ffffffffab20c940 [ 108.574024] R13: 0000000000000000 R14: ffff8de26fbeef40 R15: ffffffffab20c940 [ 108.578727] RDX: 0000000000000000 RSI: 00007ffc992640a0 RDI: 0000000000000003 [ 108.578728] RBP: 00007ffc99264110 R08: 0000000000000000 R09: 175f48ad1c3a9c00 [ 108.581187] do_idle+0x62/0x230 [ 108.585890] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc992642d8 [ 108.585891] R13: 00005577814ab2ba R14: 00005577814addf0 R15: 00007f605876d000 [ 108.587920] cpu_startup_entry+0x1d/0x20 [ 108.591422] </TASK> [ 108.596127] rest_init+0xc5/0xd0 [ 108.600490] ---[ end trace 0000000000000000 ]--- Test Setup: DUT: - Change mac address on DUT Side. Ensure NIC not having same MAC Address - Running udp_tai on DUT side. Let udp_tai running throughout the test Example: ./udp_tai -i enp170s0 -P 100000 -p 90 -c 1 -t 0 -u 30004 Host: - Perform link up/down every 5 second. Result: Kernel panic will happen on DUT Side. Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-12ipvlan: fix bound dev checking for IPv6 l3s modeHangbin Liu1-0/+4
The commit 59a0b022aa24 ("ipvlan: Make skb->skb_iif track skb->dev for l3s mode") fixed ipvlan bonded dev checking by updating skb skb_iif. This fix works for IPv4, as in raw_v4_input() the dif is from inet_iif(skb), which is skb->skb_iif when there is no route. But for IPv6, the fix is not enough, because in ipv6_raw_deliver() -> raw_v6_match(), the dif is inet6_iif(skb), which is returns IP6CB(skb)->iif instead of skb->skb_iif if it's not a l3_slave. To fix the IPv6 part issue. Let's set IP6CB(skb)->iif to correct ifindex. BTW, ipvlan handles NS/NA specifically. Since it works fine, I will not reset IP6CB(skb)->iif when addr->atype is IPVL_ICMPV6. Fixes: c675e06a98a4 ("ipvlan: decouple l3s mode dependencies from other modes") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2196710 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-11RDMA/mlx5: Fix affinity assignmentMark Bloch1-12/+0
The cited commit aimed to ensure that Virtual Functions (VFs) assign a queue affinity to a Queue Pair (QP) to distribute traffic when the LAG master creates a hardware LAG. If the affinity was set while the hardware was not in LAG, the firmware would ignore the affinity value. However, this commit unintentionally assigned an affinity to QPs on the LAG master's VPORT even if the RDMA device was not marked as LAG-enabled. In most cases, this was not an issue because when the hardware entered hardware LAG configuration, the RDMA device of the LAG master would be destroyed and a new one would be created, marked as LAG-enabled. The problem arises when a user configures Equal-Cost Multipath (ECMP). In ECMP mode, traffic can be directed to different physical ports based on the queue affinity, which is intended for use by VPORTS other than the E-Switch manager. ECMP mode is supported only if both E-Switch managers are in switchdev mode and the appropriate route is configured via IP. In this configuration, the RDMA device is not destroyed, and we retain the RDMA device that is not marked as LAG-enabled. To ensure correct behavior, Send Queues (SQs) opened by the E-Switch manager through verbs should be assigned strict affinity. This means they will only be able to communicate through the native physical port associated with the E-Switch manager. This will prevent the firmware from assigning affinity and will not allow the SQs to be remapped in case of failover. Fixes: 802dcc7fc5ec ("RDMA/mlx5: Support TX port affinity for VF drivers in LAG mode") Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://lore.kernel.org/r/425b05f4da840bc684b0f7e8ebf61aeb5cef09b0.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-06-10bnx2x: fix page fault following EEH recoveryDavid Christensen1-2/+7
In the last step of the EEH recovery process, the EEH driver calls into bnx2x_io_resume() to re-initialize the NIC hardware via the function bnx2x_nic_load(). If an error occurs during bnx2x_nic_load(), OS and hardware resources are released and an error code is returned to the caller. When called from bnx2x_io_resume(), the return code is ignored and the network interface is brought up unconditionally. Later attempts to send a packet via this interface result in a page fault due to a null pointer reference. This patch checks the return code of bnx2x_nic_load(), prints an error message if necessary, and does not enable the interface. Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-10octeontx2-af: fix lbk link credits on cn10kNithin Dabilpuram1-4/+0
Fix LBK link credits on CN10K to be same as CN9K i.e 16 * MAX_LBK_DATA_RATE instead of current scheme of calculation based on LBK buf length / FIFO size. Fixes: 6e54e1c5399a ("octeontx2-af: cn10K: Add MTU configuration") Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-10octeontx2-af: fixed resource availability checkSatha Rao1-1/+2
txschq_alloc response have two different arrays to store continuous and non-continuous schedulers of each level. Requested count should be checked for each array separately. Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology") Signed-off-by: Satha Rao <skoteshwar@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-10Merge branch '100GbE' of ↵Jakub Kicinski2-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-06-08 (ice) This series contains updates to ice driver only. Simon Horman stops null pointer dereference for GNSS error path. Kamil fixes memory leak when downing interface when XDP is enabled. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix XDP memory leak when NIC is brought up and down ice: Don't dereference NULL in ice_gnss_read error path ==================== Link: https://lore.kernel.org/r/20230608200051.451752-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-10iavf: remove mask from iavf_irq_enable_queues()Ahmed Zaki3-11/+8
Enable more than 32 IRQs by removing the u32 bit mask in iavf_irq_enable_queues(). There is no need for the mask as there are no callers that select individual IRQs through the bitmask. Also, if the PF allocates more than 32 IRQs, this mask will prevent us from using all of them. Modify the comment in iavf_register.h to show that the maximum number allowed for the IRQ index is 63 as per the iAVF standard 1.0 [1]. link: [1] https://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ethernet-adaptive-virtual-function-hardware-spec.pdf Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230608200226.451861-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-09octeontx2-af: Fix promiscuous modeRatheesh Kannoth1-27/+2
CN10KB silicon introduced a new exact match feature, which is used for DMAC filtering. The state of installed DMAC filters in this exact match table is getting corrupted when promiscuous mode is toggled. Fix this by not touching Exact match related config when promiscuous mode is toggled. Fixes: 2dba9459d2c9 ("octeontx2-af: Wrapper functions for MAC addr add/del/update/reset") Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-09net: renesas: rswitch: Fix timestamp feature after all descriptors are usedYoshihiro Shimoda1-14/+22
The timestamp descriptors were intended to act cyclically. Descriptors from index 0 through gq->ring_size - 1 contain actual information, and the last index (gq->ring_size) should have LINKFIX to indicate the first index 0 descriptor. However, the LINKFIX value is missing, causing the timestamp feature to stop after all descriptors are used. To resolve this issue, set the LINKFIX to the timestamp descritors. Reported-by: Phong Hoang <phong.hoang.wz@renesas.com> Fixes: 33f5d733b589 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-09net: usb: qmi_wwan: add support for Compal RXM-G1Wes Huang1-0/+2
Add support for Compal RXM-G1 which is based on Qualcomm SDX55 chip. This patch adds support for two compositions: 0x9091: DIAG + MODEM + QMI_RMNET + ADB 0x90db: DIAG + DUN + RMNET + DPL + QDSS(Trace) + ADB T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=9091 Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=90db Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Wes Huang <wes.huang@moxa.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20230608030141.3546-1-wes.huang@moxa.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-09igb: Fix extts capture value format for 82580/i354/i350Yuezhen Luan1-2/+6
82580/i354/i350 features circle-counter-like timestamp registers that are different with newer i210. The EXTTS capture value in AUXTSMPx should be converted from raw circle counter value to timestamp value in resolution of 1 nanosec by the driver. This issue can be reproduced on i350 nics, connecting an 1PPS signal to a SDP pin, and run 'ts2phc' command to read external 1PPS timestamp value. On i210 this works fine, but on i350 the extts is not correctly converted. The i350/i354/82580's SYSTIM and other timestamp registers are 40bit counters, presenting time range of 2^40 ns, that means these registers overflows every about 1099s. This causes all these regs can't be used directly in contrast to the newer i210/i211s. The igb driver needs to convert these raw register values to valid time stamp format by using kernel timecounter apis for i350s families. Here the igb_extts() just forgot to do the convert. Fixes: 38970eac41db ("igb: support EXTTS on 82580/i354/i350") Signed-off-by: Yuezhen Luan <eggcar.luan@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230607164116.3768175-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08net: enetc: correct the indexes of highest and 2nd highest TCsWei Fang1-2/+2
For ENETC hardware, the TCs are numbered from 0 to N-1, where N is the number of TCs. Numerically higher TC has higher priority. It's obvious that the highest priority TC index should be N-1 and the 2nd highest priority TC index should be N-2. However, the previous logic uses netdev_get_prio_tc_map() to get the indexes of highest priority and 2nd highest priority TCs, it does not make sense and is incorrect to give a "tc" argument to netdev_get_prio_tc_map(). So the driver may get the wrong indexes of the two highest priotiry TCs which would lead to failed to set the CBS for the two highest priotiry TCs. e.g. $ tc qdisc add dev eno0 parent root handle 100: mqprio num_tc 6 \ map 0 0 1 1 2 3 4 5 queues 1@0 1@1 1@2 1@3 2@4 2@6 hw 1 $ tc qdisc replace dev eno0 parent 100:6 cbs idleslope 100000 \ sendslope -900000 hicredit 12 locredit -113 offload 1 $ Error: Specified device failed to setup cbs hardware offload. ^^^^^ In this example, the previous logic deems the indexes of the two highest priotiry TCs should be 3 and 2. Actually, the indexes are 5 and 4, because the number of TCs is 6. So it would be failed to configure the CBS for the two highest priority TCs. Fixes: c431047c4efe ("enetc: add support Credit Based Shaper(CBS) for hardware offload") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-08ice: Fix XDP memory leak when NIC is brought up and downKamil Maziarz1-0/+4
Fix the buffer leak that occurs while switching the port up and down with traffic and XDP by checking for an active XDP program and freeing all empty TX buffers. Fixes: efc2214b6047 ("ice: Add support for XDP") Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-08ice: Don't dereference NULL in ice_gnss_read error pathSimon Horman1-7/+1
If pf is NULL in ice_gnss_read() then it will be dereferenced in the error path by a call to dev_dbg(ice_pf_to_dev(pf), ...). Avoid this by simply returning in this case. If logging is desired an alternate approach might be to use pr_err() before returning. Flagged by Smatch as: .../ice_gnss.c:196 ice_gnss_read() error: we previously assumed 'pf' could be null (see line 131) Fixes: 43113ff73453 ("ice: add TTY for GNSS module for E810T device") Signed-off-by: Simon Horman <horms@kernel.org> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-08bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacksSomnath Kotur1-7/+18
As per the new udp tunnel framework, drivers which need to know the details of a port entry (i.e. port type) when it gets deleted should use the .set_port / .unset_port callbacks. Implementing the current .udp_tunnel_sync callback would mean that the deleted tunnel port entry would be all zeros. This used to work on older firmware because it would not check the input when deleting a tunnel port. With newer firmware, the delete will now fail and subsequent tunnel port allocation will fail as a result. Fixes: 442a35a5a7aa ("bnxt: convert to new udp_tunnel_nic infra") Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE eventPavan Chebbi2-0/+7
The firmware can send PHC_RTC_UPDATE async event on a PF that may not have PTP registered. In such a case, there will be a null pointer deference for bp->ptp_cfg when we try to handle the event. Fix it by not registering for this event with the firmware if !bp->ptp_cfg. Also, check that bp->ptp_cfg is valid before proceeding when we receive the event. Fixes: 8bcf6f04d4a5 ("bnxt_en: Handle async event when the PHC is updated in RTC mode") Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08bnxt_en: Skip firmware fatal error recovery if chip is not accessibleVikas Gupta1-2/+3
Driver starts firmware fatal error recovery by detecting heartbeat failure or fw reset count register changing. But these checks are not reliable if the device is not accessible. This can happen while DPC (Downstream Port containment) is in progress. Skip firmware fatal recovery if pci_device_is_present() returns false. Fixes: acfb50e4e773 ("bnxt_en: Add FW fatal devlink_health_reporter.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08bnxt_en: Query default VLAN before VNIC setup on a VFSomnath Kotur1-0/+3
We need to call bnxt_hwrm_func_qcfg() on a VF to query the default VLAN that may be setup by the PF. If a default VLAN is enabled, the VF cannot support VLAN acceleration on the receive side and the VNIC must be setup to strip out the default VLAN tag. If a default VLAN is not enabled, the VF can support VLAN acceleration on the receive side. The VNIC should be set up to strip or not strip the VLAN based on the RX VLAN acceleration setting. Without this call to determine the default VLAN before calling bnxt_setup_vnic(), the VNIC may not be set up correctly. For example, bnxt_setup_vnic() may set up to strip the VLAN tag based on stale default VLAN information. If RX VLAN acceleration is not enabled, the VLAN tag will be incorrectly stripped and the RX data path will not work correctly. Fixes: cf6645f8ebc6 ("bnxt_en: Add function for VF driver to query default VLAN.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08bnxt_en: Don't issue AP reset during ethtool's reset operationSreekanth Reddy1-1/+1
Only older NIC controller's firmware uses the PROC AP reset type. Firmware on 5731X/5741X and newer chips does not support this reset type. When bnxt_reset() issues a series of resets, this PROC AP reset may actually fail on these newer chips because the firmware is not ready to accept this unsupported command yet. Avoid this unnecessary error by skipping this reset type on chips that don't support it. Fixes: 7a13240e3718 ("bnxt_en: fix ethtool_reset_flags ABI violations") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg()Pavan Chebbi1-0/+1
We must specify the vnic id of the vnic in the input structure of this firmware message. Otherwise we will get an error from the firmware. Fixes: 98a4322b70e8 ("bnxt_en: update RSS config using difference algorithm") Reviewed-by: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-08net: bcmgenet: Fix EEE implementationFlorian Fainelli3-14/+16
We had a number of short comings: - EEE must be re-evaluated whenever the state machine detects a link change as wight be switching from a link partner with EEE enabled/disabled - tx_lpi_enabled controls whether EEE should be enabled/disabled for the transmit path, which applies to the TBUF block - We do not need to forcibly enable EEE upon system resume, as the PHY state machine will trigger a link event that will do that, too Fixes: 6ef398ea60d9 ("net: bcmgenet: add EEE support") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08eth: ixgbe: fix the wake conditionJakub Kicinski1-1/+1
Flip the netif_carrier_ok() condition in queue wake logic. When I moved it to inside __netif_txq_completed_wake() I missed negating it. This made the condition ineffective and could probably lead to crashes. Fixes: 301f227fc860 ("net: piggy back on the memory barrier in bql when waking queues") Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230607010826.960226-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-08eth: bnxt: fix the wake conditionJakub Kicinski1-1/+1
The down condition should be the negation of the wake condition, IOW when I moved it from: if (cond && wake()) to if (__netif_txq_completed_wake(cond)) Cond should have been negated. Flip it now. This bug leads to occasional crashes with netconsole. It may also lead to queue never waking up in case BQL is not enabled. Reported-by: David Wei <davidhwei@meta.com> Fixes: 08a096780d92 ("bnxt: use new queue try_stop/try_wake macros") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20230607010826.960226-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-07ice: make writes to /dev/gnssX synchronousMichal Schmidt4-72/+6
The current ice driver's GNSS write implementation buffers writes and works through them asynchronously in a kthread. That's bad because: - The GNSS write_raw operation is supposed to be synchronous[1][2]. - There is no upper bound on the number of pending writes. Userspace can submit writes much faster than the driver can process, consuming unlimited amounts of kernel memory. A patch that's currently on review[3] ("[v3,net] ice: Write all GNSS buffers instead of first one") would add one more problem: - The possibility of waiting for a very long time to flush the write work when doing rmmod, softlockups. To fix these issues, simplify the implementation: Drop the buffering, the write_work, and make the writes synchronous. I tested this with gpsd and ubxtool. [1] https://events19.linuxfoundation.org/wp-content/uploads/2017/12/The-GNSS-Subsystem-Johan-Hovold-Hovold-Consulting-AB.pdf "User interface" slide. [2] A comment in drivers/gnss/core.c:gnss_write(): /* Ignoring O_NONBLOCK, write_raw() is synchronous. */ [3] https://patchwork.ozlabs.org/project/intel-wired-lan/patch/20230217120541.16745-1-karol.kolacinski@intel.com/ Fixes: d6b98c8d242a ("ice: add write functionality for GNSS TTY") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-07Merge tag 'wireless-2023-06-06' of ↵Jakub Kicinski11-36/+102
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.4 Both rtw88 and rtw89 have a 802.11 powersave fix for a regression introduced in v6.0. mt76 fixes a race and a null pointer dereference. iwlwifi fixes an issue where not enough memory was allocated for a firmware event. And finally the stack has several smaller fixes all over. * tag 'wireless-2023-06-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: cfg80211: fix locking in regulatory disconnect wifi: cfg80211: fix locking in sched scan stop work wifi: iwlwifi: mvm: Fix -Warray-bounds bug in iwl_mvm_wait_d3_notif() wifi: mac80211: fix switch count in EMA beacons wifi: mac80211: don't translate beacon/presp addrs wifi: mac80211: mlme: fix non-inheritence element wifi: cfg80211: reject bad AP MLD address wifi: mac80211: use correct iftype HE cap wifi: mt76: mt7996: fix possible NULL pointer dereference in mt7996_mac_write_txwi() wifi: rtw89: remove redundant check of entering LPS wifi: rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS wifi: rtw88: correct PS calculation for SUPPORTS_DYNAMIC_PS wifi: mt76: mt7615: fix possible race in mt7615_mac_sta_poll ==================== Link: https://lore.kernel.org/r/20230606150817.EC133C433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-07virtio_net: use control_buf for coalesce paramsBrett Creeley1-8/+8
Commit 699b045a8e43 ("net: virtio_net: notifications coalescing support") added coalescing command support for virtio_net. However, the coalesce commands are using buffers on the stack, which is causing the device to see DMA errors. There should also be a complaint from check_for_stack() in debug_dma_map_xyz(). Fix this by adding and using coalesce params from the control_buf struct, which aligns with other commands. Cc: stable@vger.kernel.org Fixes: 699b045a8e43 ("net: virtio_net: notifications coalescing support") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Allen Hubbe <allen.hubbe@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20230605195925.51625-1-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-07pds_core: Fix FW recovery detectionBrett Creeley1-2/+8
Commit 523847df1b37 ("pds_core: add devcmd device interfaces") included initial support for FW recovery detection. Unfortunately, the ordering in pdsc_is_fw_good() was incorrect, which was causing FW recovery to be undetected by the driver. Fix this by making sure to update the cached fw_status by calling pdsc_is_fw_running() before setting the local FW gen. Fixes: 523847df1b37 ("pds_core: add devcmd device interfaces") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230605195116.49653-1-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-06qed/qede: Fix scheduling while atomicManish Chopra4-4/+60
Statistics read through bond interface via sysfs causes below bug and traces as it triggers the bonding module to collect the slave device statistics while holding the spinlock, beneath that qede->qed driver statistics flow gets scheduled out due to usleep_range() used in PTT acquire logic [ 3673.988874] Hardware name: HPE ProLiant DL365 Gen10 Plus/ProLiant DL365 Gen10 Plus, BIOS A42 10/29/2021 [ 3673.988878] Call Trace: [ 3673.988891] dump_stack_lvl+0x34/0x44 [ 3673.988908] __schedule_bug.cold+0x47/0x53 [ 3673.988918] __schedule+0x3fb/0x560 [ 3673.988929] schedule+0x43/0xb0 [ 3673.988932] schedule_hrtimeout_range_clock+0xbf/0x1b0 [ 3673.988937] ? __hrtimer_init+0xc0/0xc0 [ 3673.988950] usleep_range+0x5e/0x80 [ 3673.988955] qed_ptt_acquire+0x2b/0xd0 [qed] [ 3673.988981] _qed_get_vport_stats+0x141/0x240 [qed] [ 3673.989001] qed_get_vport_stats+0x18/0x80 [qed] [ 3673.989016] qede_fill_by_demand_stats+0x37/0x400 [qede] [ 3673.989028] qede_get_stats64+0x19/0xe0 [qede] [ 3673.989034] dev_get_stats+0x5c/0xc0 [ 3673.989045] netstat_show.constprop.0+0x52/0xb0 [ 3673.989055] dev_attr_show+0x19/0x40 [ 3673.989065] sysfs_kf_seq_show+0x9b/0xf0 [ 3673.989076] seq_read_iter+0x120/0x4b0 [ 3673.989087] new_sync_read+0x118/0x1a0 [ 3673.989095] vfs_read+0xf3/0x180 [ 3673.989099] ksys_read+0x5f/0xe0 [ 3673.989102] do_syscall_64+0x3b/0x90 [ 3673.989109] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3673.989115] RIP: 0033:0x7f8467d0b082 [ 3673.989119] Code: c0 e9 b2 fe ff ff 50 48 8d 3d ca 05 08 00 e8 35 e7 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 3673.989121] RSP: 002b:00007ffffb21fd08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 3673.989127] RAX: ffffffffffffffda RBX: 000000000100eca0 RCX: 00007f8467d0b082 [ 3673.989128] RDX: 00000000000003ff RSI: 00007ffffb21fdc0 RDI: 0000000000000003 [ 3673.989130] RBP: 00007f8467b96028 R08: 0000000000000010 R09: 00007ffffb21ec00 [ 3673.989132] R10: 00007ffffb27b170 R11: 0000000000000246 R12: 00000000000000f0 [ 3673.989134] R13: 0000000000000003 R14: 00007f8467b92000 R15: 0000000000045a05 [ 3673.989139] CPU: 30 PID: 285188 Comm: read_all Kdump: loaded Tainted: G W OE Fix this by collecting the statistics asynchronously from a periodic delayed work scheduled at default stats coalescing interval and return the recent copy of statisitcs from .ndo_get_stats64(), also add ability to configure/retrieve stats coalescing interval using below commands - ethtool -C ethx stats-block-usecs <val> ethtool -c ethx Fixes: 133fac0eedc3 ("qede: Add basic ethtool support") Cc: Sudarsana Kalluru <skalluru@marvell.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Manish Chopra <manishc@marvell.com> Link: https://lore.kernel.org/r/20230605112600.48238-1-manishc@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-06wifi: iwlwifi: mvm: Fix -Warray-bounds bug in iwl_mvm_wait_d3_notif()Gustavo A. R. Silva1-6/+2
kmemdup() at line 2735 is not duplicating enough memory for notif->tid_tear_down and notif->station_id. As it only duplicates 612 bytes: up to offsetofend(struct iwl_wowlan_info_notif, received_beacons), this is the range of [0, 612) bytes. 2735 notif = kmemdup(notif_v1, 2736 offsetofend(struct iwl_wowlan_info_notif, 2737 received_beacons), 2738 GFP_ATOMIC); which evidently does not cover bytes 612 and 613 for members tid_tear_down and station_id in struct iwl_wowlan_info_notif. See below: $ pahole -C iwl_wowlan_info_notif drivers/net/wireless/intel/iwlwifi/mvm/d3.o struct iwl_wowlan_info_notif { struct iwl_wowlan_gtk_status_v3 gtk[2]; /* 0 488 */ /* --- cacheline 7 boundary (448 bytes) was 40 bytes ago --- */ struct iwl_wowlan_igtk_status igtk[2]; /* 488 80 */ /* --- cacheline 8 boundary (512 bytes) was 56 bytes ago --- */ __le64 replay_ctr; /* 568 8 */ /* --- cacheline 9 boundary (576 bytes) --- */ __le16 pattern_number; /* 576 2 */ __le16 reserved1; /* 578 2 */ __le16 qos_seq_ctr[8]; /* 580 16 */ __le32 wakeup_reasons; /* 596 4 */ __le32 num_of_gtk_rekeys; /* 600 4 */ __le32 transmitted_ndps; /* 604 4 */ __le32 received_beacons; /* 608 4 */ u8 tid_tear_down; /* 612 1 */ u8 station_id; /* 613 1 */ u8 reserved2[2]; /* 614 2 */ /* size: 616, cachelines: 10, members: 13 */ /* last cacheline: 40 bytes */ }; Therefore, when the following assignments take place, actually no memory has been allocated for those objects: 2743 notif->tid_tear_down = notif_v1->tid_tear_down; 2744 notif->station_id = notif_v1->station_id; Fix this by allocating space for the whole notif object and zero out the remaining space in memory after member station_id. This also fixes the following -Warray-bounds issues: CC drivers/net/wireless/intel/iwlwifi/mvm/d3.o drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function ‘iwl_mvm_wait_d3_notif’: drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2743:30: warning: array subscript ‘struct iwl_wowlan_info_notif[0]’ is partly outside array bounds of ‘unsigned char[612]’ [-Warray-bounds=] 2743 | notif->tid_tear_down = notif_v1->tid_tear_down; | from drivers/net/wireless/intel/iwlwifi/mvm/d3.c:7: In function ‘kmemdup’, inlined from ‘iwl_mvm_wait_d3_notif’ at drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2735:12: include/linux/fortify-string.h:765:16: note: object of size 612 allocated by ‘__real_kmemdup’ 765 | return __real_kmemdup(p, size, gfp); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function ‘iwl_mvm_wait_d3_notif’: drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2744:30: warning: array subscript ‘struct iwl_wowlan_info_notif[0]’ is partly outside array bounds of ‘unsigned char[612]’ [-Warray-bounds=] 2744 | notif->station_id = notif_v1->station_id; | ^~ In function ‘kmemdup’, inlined from ‘iwl_mvm_wait_d3_notif’ at drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2735:12: include/linux/fortify-string.h:765:16: note: object of size 612 allocated by ‘__real_kmemdup’ 765 | return __real_kmemdup(p, size, gfp); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ Link: https://github.com/KSPP/linux/issues/306 Fixes: 905d50ddbc83 ("wifi: iwlwifi: mvm: support wowlan info notification version 2") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/ZHpGN555FwAKGduH@work Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-05net: stmmac: dwmac-qcom-ethqos: fix a regression on EMAC < 3Bartosz Golaszewski1-1/+2
We must not assign plat_dat->dwmac4_addrs unconditionally as for structures which don't set them, this will result in the core driver using zeroes everywhere and breaking the driver for older HW. On EMAC < 2 the address should remain NULL. Fixes: b68376191c69 ("net: stmmac: dwmac-qcom-ethqos: Add EMAC3 support") Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-04net: enetc: correct rx_bytes statistics of XDPWei Fang1-0/+8
The rx_bytes statistics of XDP are always zero, because rx_byte_cnt is not updated after it is initialized to 0. So fix it. Fixes: d1b15102dd16 ("net: enetc: add support for XDP_DROP and XDP_PASS") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-04net: enetc: correct the statistics of rx bytesWei Fang1-1/+7
The rx_bytes of struct net_device_stats should count the length of ethernet frames excluding the FCS. However, there are two problems with the rx_bytes statistics of the current enetc driver. one is that the length of VLAN header is not counted if the VLAN extraction feature is enabled. The other is that the length of L2 header is not counted, because eth_type_trans() is invoked before updating rx_bytes which will subtract the length of L2 header from skb->len. BTW, the rx_bytes statistics of XDP path also have similar problem, I will fix it in another patch. Fixes: a800abd3ecb9 ("net: enetc: move skb creation into enetc_build_skb") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-09 21:21:12 +0300