summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2022-03-03ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()Maciej Fijalkowski1-2/+4
Commit c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK") addressed the ring transient state when MEM_TYPE_XSK_BUFF_POOL was being configured which in turn caused the interface to through down/up. Maurice reported that when carrier is not ok and xsk_pool is present on ring pair, ksoftirqd will consume 100% CPU cycles due to the constant NAPI rescheduling as ixgbe_poll() states that there is still some work to be done. To fix this, do not set work_done to false for a !netif_carrier_ok(). Fixes: c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK") Reported-by: Maurice Baijens <maurice.baijens@ellips.com> Tested-by: Maurice Baijens <maurice.baijens@ellips.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03bnx2: Fix an error messageChristophe JAILLET1-1/+1
Fix an error message and report the correct failing function. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-03sfc: extend the locking on mcdi->seqnoNiels Dossche1-1/+1
seqno could be read as a stale value outside of the lock. The lock is already acquired to protect the modification of seqno against a possible race condition. Place the reading of this value also inside this locking to protect it against a possible race condition. Signed-off-by: Niels Dossche <dossche.niels@gmail.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-03net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()Zheyu Ma1-0/+3
During driver initialization, the pointer of card info, i.e. the variable 'ci' is required. However, the definition of 'com20020pci_id_table' reveals that this field is empty for some devices, which will cause null pointer dereference when initializing these devices. The following log reveals it: [ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci] [ 3.975181] Call Trace: [ 3.976208] local_pci_probe+0x13f/0x210 [ 3.977248] pci_device_probe+0x34c/0x6d0 [ 3.977255] ? pci_uevent+0x470/0x470 [ 3.978265] really_probe+0x24c/0x8d0 [ 3.978273] __driver_probe_device+0x1b3/0x280 [ 3.979288] driver_probe_device+0x50/0x370 Fix this by checking whether the 'ci' is a null pointer first. Fixes: 8c14f9c70327 ("ARCNET: add com20020 PCI IDs with metadata") Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-03net: ipa: add an interconnect dependencyAlex Elder1-0/+1
In order to function, the IPA driver very clearly requires the interconnect framework to be enabled in the kernel configuration. State that dependency in the Kconfig file. This became a problem when CONFIG_COMPILE_TEST support was added. Non-Qualcomm platforms won't necessarily enable CONFIG_INTERCONNECT. Reported-by: kernel test robot <lkp@intel.com> Fixes: 38a4066f593c5 ("net: ipa: support COMPILE_TEST") Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20220301113440.257916-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03iwlwifi: mvm: return value for request_ownershipEmmanuel Grumbach1-2/+3
Propagate the value to the user space so it can understand if the operation failed or not. Fixes: bfcfdb59b669 ("iwlwifi: mvm: add vendor commands needed for iwlmei") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20220302072715.4885-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-03iwlwifi: fix build error for IWLMEIRandy Dunlap1-0/+1
When CONFIG_IWLWIFI=m and CONFIG_IWLMEI=y, the kernel build system must be told to build the iwlwifi/ subdirectory for both IWLWIFI and IWLMEI so that builds for both =y and =m are done. This resolves an undefined reference build error: ERROR: modpost: "iwl_mei_is_connected" [drivers/net/wireless/intel/iwlwifi/iwlwifi.ko] undefined! Fixes: 977df8bd5844 ("wlwifi: work around reverse dependency on MEI") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20220227200051.7176-1-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-01Merge tag 'wireless-for-net-2022-03-01' of ↵David S. Miller3-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless johannes Berg says: ==================== Some last-minute fixes: * rfkill - add missing rfill_soft_blocked() when disabled * cfg80211 - handle a nla_memdup() failure correctly - fix CONFIG_CFG80211_EXTRA_REGDB_KEYDIR typo in Makefile * mac80211 - fix EAPOL handling in 802.3 RX path - reject setting up aggregation sessions before connection is authorized to avoid timeouts or similar - handle some SAE authentication steps correctly - fix AC selection in mesh forwarding * iwlwifi - remove TWT support as it causes firmware crashes when the AP isn't behaving correctly - check debugfs pointer before dereferncing it ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-01iwlwifi: mvm: check debugfs_dir ptr before useRandy Dunlap1-3/+8
When "debugfs=off" is used on the kernel command line, iwiwifi's mvm module uses an invalid/unchecked debugfs_dir pointer and causes a BUG: BUG: kernel NULL pointer dereference, address: 000000000000004f #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP CPU: 1 PID: 503 Comm: modprobe Tainted: G W 5.17.0-rc5 #7 Hardware name: Dell Inc. Inspiron 15 5510/076F7Y, BIOS 2.4.1 11/05/2021 RIP: 0010:iwl_mvm_dbgfs_register+0x692/0x700 [iwlmvm] Code: 69 a0 be 80 01 00 00 48 c7 c7 50 73 6a a0 e8 95 cf ee e0 48 8b 83 b0 1e 00 00 48 c7 c2 54 73 6a a0 be 64 00 00 00 48 8d 7d 8c <48> 8b 48 50 e8 15 22 07 e1 48 8b 43 28 48 8d 55 8c 48 c7 c7 5f 73 RSP: 0018:ffffc90000a0ba68 EFLAGS: 00010246 RAX: ffffffffffffffff RBX: ffff88817d6e3328 RCX: ffff88817d6e3328 RDX: ffffffffa06a7354 RSI: 0000000000000064 RDI: ffffc90000a0ba6c RBP: ffffc90000a0bae0 R08: ffffffff824e4880 R09: ffffffffa069d620 R10: ffffc90000a0ba00 R11: ffffffffffffffff R12: 0000000000000000 R13: ffffc90000a0bb28 R14: ffff88817d6e3328 R15: ffff88817d6e3320 FS: 00007f64dd92d740(0000) GS:ffff88847f640000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000004f CR3: 000000016fc79001 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> ? iwl_mvm_mac_setup_register+0xbdc/0xda0 [iwlmvm] iwl_mvm_start_post_nvm+0x71/0x100 [iwlmvm] iwl_op_mode_mvm_start+0xab8/0xb30 [iwlmvm] _iwl_op_mode_start+0x6f/0xd0 [iwlwifi] iwl_opmode_register+0x6a/0xe0 [iwlwifi] ? 0xffffffffa0231000 iwl_mvm_init+0x35/0x1000 [iwlmvm] ? 0xffffffffa0231000 do_one_initcall+0x5a/0x1b0 ? kmem_cache_alloc+0x1e5/0x2f0 ? do_init_module+0x1e/0x220 do_init_module+0x48/0x220 load_module+0x2602/0x2bc0 ? __kernel_read+0x145/0x2e0 ? kernel_read_file+0x229/0x290 __do_sys_finit_module+0xc5/0x130 ? __do_sys_finit_module+0xc5/0x130 __x64_sys_finit_module+0x13/0x20 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f64dda564dd Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 29 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffdba393f88 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f64dda564dd RDX: 0000000000000000 RSI: 00005575399e2ab2 RDI: 0000000000000001 RBP: 000055753a91c5e0 R08: 0000000000000000 R09: 0000000000000002 R10: 0000000000000001 R11: 0000000000000246 R12: 00005575399e2ab2 R13: 000055753a91ceb0 R14: 0000000000000000 R15: 000055753a923018 </TASK> Modules linked in: btintel(+) btmtk bluetooth vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic iwlmvm(+) snd_sof_pci_intel_tgl mac80211 snd_sof_intel_hda_common soundwire_intel soundwire_generic_allocation soundwire_cadence soundwire_bus snd_sof_intel_hda snd_sof_pci snd_sof snd_sof_xtensa_dsp snd_soc_hdac_hda snd_hda_ext_core snd_soc_acpi_intel_match snd_soc_acpi snd_soc_core btrfs snd_compress snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec raid6_pq iwlwifi snd_hda_core snd_pcm snd_timer snd soundcore cfg80211 intel_ish_ipc(+) thunderbolt rfkill intel_ishtp ucsi_acpi wmi i2c_hid_acpi i2c_hid evdev CR2: 000000000000004f ---[ end trace 0000000000000000 ]--- Check the debugfs_dir pointer for an error before using it. Fixes: 8c082a99edb9 ("iwlwifi: mvm: simplify iwl_mvm_dbgfs_register") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: linux-wireless@vger.kernel.org Cc: Kalle Valo <kvalo@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220223030630.23241-1-rdunlap@infradead.org [change to make both conditional] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-01iwlwifi: don't advertise TWT supportGolan Ben Ami2-3/+1
Some APs misbehave when TWT is used and cause our firmware to crash. We don't know a reasonable way to detect and work around this problem in the FW yet. To prevent these crashes, disable TWT in the driver by stopping to advertise TWT support. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523 Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> [reworded the commit message] Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20220301072926.153969-1-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-01e1000e: Correct NVM checksum verification flowSasha Neftin1-2/+2
Update MAC type check e1000_pch_tgp because for e1000_pch_cnp, NVM checksum update is still possible. Emit a more detailed warning message. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1191663 Fixes: 4051f68318ca ("e1000e: Do not take care about recovery NVM checksum") Reported-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-01e1000e: Fix possible HW unit hang after an s0ix exitSasha Neftin4-0/+32
Disable the OEM bit/Gig Disable/restart AN impact and disable the PHY LAN connected device (LCD) reset during power management flows. This fixes possible HW unit hangs on the s0ix exit on some corporate ADL platforms. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821 Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by: Nir Efrati <nir.efrati@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-28igc: igc_write_phy_reg_gpy: drop premature returnSasha Neftin1-2/+0
Similar to "igc_read_phy_reg_gpy: drop premature return" patch. igc_write_phy_reg_gpy checks the return value from igc_write_phy_reg_mdic and if it's not 0, returns immediately. By doing this, it leaves the HW semaphore in the acquired state. Drop this premature return statement, the function returns after releasing the semaphore immediately anyway. Fixes: 5586838fe9ce ("igc: Add code for PHY support") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Reported-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-28igc: igc_read_phy_reg_gpy: drop premature returnCorinna Vinschen1-2/+0
igc_read_phy_reg_gpy checks the return value from igc_read_phy_reg_mdic and if it's not 0, returns immediately. By doing this, it leaves the HW semaphore in the acquired state. Drop this premature return statement, the function returns after releasing the semaphore immediately anyway. Fixes: 5586838fe9ce ("igc: Add code for PHY support") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-28net: ipa: fix a build dependencyAlex Elder1-0/+1
An IPA build problem arose in the linux-next tree the other day. The problem is that a recent commit adds a new dependency on some code, and the Kconfig file for IPA doesn't reflect that dependency. As a result, some configurations can fail to build (particularly when COMPILE_TEST is enabled). The recent patch adds calls to qmp_get(), qmp_put(), and qmp_send(), and those are built based on the QCOM_AOSS_QMP config option. If that symbol is not defined, stubs are defined, so we just need to ensure QCOM_AOSS_QMP is compatible with QCOM_IPA, or it's not defined. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 34a081761e4e3 ("net: ipa: request IPA register values be retained") Signed-off-by: Alex Elder <elder@linaro.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-28net: sparx5: Add #include to remove warningCasper Andersson1-0/+2
main.h uses NUM_TARGETS from main_regs.h, but the missing include never causes any errors because everywhere main.h is (currently) included, main_regs.h is included before. But since it is dependent on main_regs.h it should always be included. Signed-off-by: Casper Andersson <casper.casan@gmail.com> Reviewed-by: Joacim Zetterling <joacim.zetterling@westermo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-26Merge branch '40GbE' of ↵David S. Miller3-75/+114
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-25 This series contains updates to iavf driver only. Slawomir fixes stability issues that can be seen when stressing the driver using a large number of VFs with a multitude of operations. Among the fixes are reworking mutexes to provide more effective locking, ensuring initialization is complete before teardown, preventing operations which could race while removing the driver, stopping certain tasks from being queued when the device is down, and adding a missing mutex unlock. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-26Merge tag 'linux-can-fixes-for-5.17-20220225' of ↵Jakub Kicinski4-15/+18
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-02-25 The first 2 patches are by Vincent Mailhol and fix the error handling of the ndo_open callbacks of the etas_es58x and the gs_usb CAN USB drivers. The last patch is by Lad Prabhakar and fixes a small race condition in the rcar_canfd's rcar_canfd_channel_probe() function. * tag 'linux-can-fixes-for-5.17-20220225' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when fully ready can: gs_usb: change active_channels's type from atomic_t to u8 can: etas_es58x: change opened_channel_cnt's type from atomic_t to u8 ==================== Link: https://lore.kernel.org/r/20220225165622.3231809-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-25iavf: Fix __IAVF_RESETTING state usageSlawomir Laba1-7/+6
The setup of __IAVF_RESETTING state in watchdog task had no effect and could lead to slow resets in the driver as the task for __IAVF_RESETTING state only requeues watchdog. Till now the __IAVF_RESETTING was interpreted by reset task as running state which could lead to errors with allocating and resources disposal. Make watchdog_task queue the reset task when it's necessary. Do not update the state to __IAVF_RESETTING so the reset task knows exactly what is the current state of the adapter. Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-25iavf: Fix missing check for running netdevSlawomir Laba1-2/+5
The driver was queueing reset_task regardless of the netdev state. Do not queue the reset task in iavf_change_mtu if netdev is not running. Fixes: fdd4044ffdc8 ("iavf: Remove timer for work triggering, use delaying work instead") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-25iavf: Fix deadlock in iavf_reset_taskSlawomir Laba1-0/+1
There exists a missing mutex_unlock call on crit_lock in iavf_reset_task call path. Unlock the crit_lock before returning from reset task. Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-25iavf: Fix race in init stateSlawomir Laba1-1/+2
When iavf_init_version_check sends VIRTCHNL_OP_GET_VF_RESOURCES message, the driver will wait for the response after requeueing the watchdog task in iavf_init_get_resources call stack. The logic is implemented this way that iavf_init_get_resources has to be called in order to allocate adapter->vf_res. It is polling for the AQ response in iavf_get_vf_config function. Expect a call trace from kernel when adminq_task worker handles this message first. adapter->vf_res will be NULL in iavf_virtchnl_completion. Make the watchdog task not queue the adminq_task if the init process is not finished yet. Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-25iavf: Fix locking for VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPSSlawomir Laba3-24/+23
iavf_virtchnl_completion is called under crit_lock but when the code for VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is called, this lock is released in order to obtain rtnl_lock to avoid ABBA deadlock with unregister_netdev. Along with the new way iavf_remove behaves, there exist many risks related to the lock release and attmepts to regrab it. The driver faces crashes related to races between unregister_netdev and netdev_update_features. Yet another risk is that the driver could already obtain the crit_lock in order to destroy it and iavf_virtchnl_completion could crash or block forever. Make iavf_virtchnl_completion never relock crit_lock in it's call paths. Extract rtnl_lock locking logic to the driver for unregister_netdev in order to set the netdev_registered flag inside the lock. Introduce a new flag that will inform adminq_task to perform the code from VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS right after it finishes processing messages. Guard this code with remove flags so it's never called when the driver is in remove state. Fixes: 5951a2b9812d ("iavf: Fix VLAN feature flags after VFR") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-25iavf: Fix init state closure on removeSlawomir Laba2-1/+27
When init states of the adapter work, the errors like lack of communication with the PF might hop in. If such events occur the driver restores previous states in order to retry initialization in a proper way. When remove task kicks in, this situation could lead to races with unregistering the netdevice as well as resources cleanup. With the commit introducing the waiting in remove for init to complete, this problem turns into an endless waiting if init never recovers from errors. Introduce __IAVF_IN_REMOVE_TASK bit to indicate that the remove thread has started. Make __IAVF_COMM_FAILED adapter state respect the __IAVF_IN_REMOVE_TASK bit and set the __IAVF_INIT_FAILED state and return without any action instead of trying to recover. Make __IAVF_INIT_FAILED adapter state respect the __IAVF_IN_REMOVE_TASK bit and return without any further actions. Make the loop in the remove handler break when adapter has __IAVF_INIT_FAILED state set. Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-25iavf: Add waiting so the port is initialized in removeSlawomir Laba1-11/+16
There exist races when port is being configured and remove is triggered. unregister_netdev is not and can't be called under crit_lock mutex since it is calling ndo_stop -> iavf_close which requires this lock. Depending on init state the netdev could be still unregistered so unregister_netdev never cleans up, when shortly after that the device could become registered. Make iavf_remove wait until port finishes initialization. All critical state changes are atomic (under crit_lock). Crashes that come from iavf_reset_interrupt_capability and iavf_free_traffic_irqs should now be solved in a graceful manner. Fixes: 605ca7c5c6707 ("iavf: Fix kernel BUG in free_msi_irqs") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-25iavf: Rework mutexes for better synchronisationSlawomir Laba2-31/+36
The driver used to crash in multiple spots when put to stress testing of the init, reset and remove paths. The user would experience call traces or hangs when creating, resetting, removing VFs. Depending on the machines, the call traces are happening in random spots, like reset restoring resources racing with driver remove. Make adapter->crit_lock mutex a mandatory lock for guarding the operations performed on all workqueues and functions dealing with resource allocation and disposal. Make __IAVF_REMOVE a final state of the driver respected by workqueues that shall not requeue, when they fail to obtain the crit_lock. Make the IRQ handler not to queue the new work for adminq_task when the __IAVF_REMOVE state is set. Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Phani Burra <phani.r.burra@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-25net: stmmac: fix return value of __setup handlerRandy Dunlap1-3/+3
__setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 causes the "option=value" string to be added to init's environment strings, polluting it. Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Fixes: f3240e2811f0 ("stmmac: remove warning when compile as built-in (V2)") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Jose Abreu <joabreu@synopsys.com> Link: https://lore.kernel.org/r/20220224033536.25056-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-25net: sxgbe: fix return value of __setup handlerRandy Dunlap1-3/+3
__setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 causes the "option=value" string to be added to init's environment strings, polluting it. Fixes: acc18c147b22 ("net: sxgbe: add EEE(Energy Efficient Ethernet) for Samsung sxgbe") Fixes: 1edb9ca69e8a ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Siva Reddy <siva.kallam@samsung.com> Cc: Girish K S <ks.giri@samsung.com> Cc: Byungho An <bh74.an@samsung.com> Link: https://lore.kernel.org/r/20220224033528.24640-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-25can: rcar_canfd: rcar_canfd_channel_probe(): register the CAN device when ↵Lad Prabhakar1-3/+3
fully ready Register the CAN device only when all the necessary initialization is completed. This patch makes sure all the data structures and locks are initialized before registering the CAN device. Link: https://lore.kernel.org/all/20220221225935.12300-1-prabhakar.mahadev-lad.rj@bp.renesas.com Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Pavel Machek <pavel@denx.de> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-02-25net: sparx5: Fix add vlan when invalid operationCasper Andersson1-10/+10
Check if operation is valid before changing any settings in hardware. Otherwise it results in changes being made despite it not being a valid operation. Fixes: 78eab33bb68b ("net: sparx5: add vlan support") Signed-off-by: Casper Andersson <casper.casan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25net: chelsio: cxgb3: check the return value of pci_find_capability()Jia-Ju Bai1-0/+2
The function pci_find_capability() in t3_prep_adapter() can fail, so its return value should be checked. Fixes: 4d22de3e6cc4 ("Add support for the latest 1G/10G Chelsio adapter, T3") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: Allow queueing resets during probeSukadev Bhattiprolu2-10/+98
We currently don't allow queuing resets when adapter is in VNIC_PROBING state - instead we throw away the reset and return EBUSY. The reasoning is probably that during ibmvnic_probe() the ibmvnic_adapter itself is being initialized so performing a reset during this time can lead us to accessing fields in the ibmvnic_adapter that are not fully initialized. A review of the code shows that all the adapter state neede to process a reset is initialized before registering the CRQ so that should no longer be a concern. Further the expectation is that if we do get a reset (transport event) during probe, the do..while() loop in ibmvnic_probe() will handle this by reinitializing the CRQ. While that is true to some extent, it is possible that the reset might occur _after_ the CRQ is registered and CRQ_INIT message was exchanged but _before_ the adapter state is set to VNIC_PROBED. As mentioned above, such a reset will be thrown away. While the client assumes that the adapter is functional, the vnic server will wait for the client to reinit the adapter. This disconnect between the two leaves the adapter down needing manual intervention. Because ibmvnic_probe() has other work to do after initializing the CRQ (such as registering the netdev at a minimum) and because the reset event can occur at any instant after the CRQ is initialized, there will always be a window between initializing the CRQ and considering the adapter ready for resets (ie state == PROBED). So rather than discarding resets during this window, allow queueing them - but only process them after the adapter is fully initialized. To do this, introduce a new completion state ->probe_done and have the reset worker thread wait on this before processing resets. This change brings up two new situations in or just after ibmvnic_probe(). First after one or more resets were queued, we encounter an error and decide to retry the initialization. At that point the queued resets are no longer relevant since we could be talking to a new vnic server. So we must purge/flush the queued resets before restarting the initialization. As a side note, since we are still in the probing stage and we have not registered the netdev, it will not be CHANGE_PARAM reset. Second this change opens up a potential race between the worker thread in __ibmvnic_reset(), the tasklet and the ibmvnic_open() due to the following sequence of events: 1. Register CRQ 2. Get transport event before CRQ_INIT completes. 3. Tasklet schedules reset: a) add rwi to list b) schedule_work() to start worker thread which runs and waits for ->probe_done. 4. ibmvnic_probe() decides to retry, purges rwi_list 5. Re-register crq and this time rest of probe succeeds - register netdev and complete(->probe_done). 6. Worker thread resumes in __ibmvnic_reset() from 3b. 7. Worker thread sets ->resetting bit 8. ibmvnic_open() comes in, notices ->resetting bit, sets state to IBMVNIC_OPEN and returns early expecting worker thread to finish the open. 9. Worker thread finds rwi_list empty and returns without opening the interface. If this happens, the ->ndo_open() call is effectively lost and the interface remains down. To address this, ensure that ->rwi_list is not empty before setting the ->resetting bit. See also comments in __ibmvnic_reset(). Fixes: 6a2fb0e99f9c ("ibmvnic: driver initialization for kdump/kexec") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: clear fop when retrying probeSukadev Bhattiprolu1-0/+5
Clear ->failover_pending flag that may have been set in the previous pass of registering CRQ. If we don't clear, a subsequent ibmvnic_open() call would be misled into thinking a failover is pending and assuming that the reset worker thread would open the adapter. If this pass of registering the CRQ succeeds (i.e there is no transport event), there wouldn't be a reset worker thread. This would leave the adapter unconfigured and require manual intervention to bring it up during boot. Fixes: 5a18e1e0c193 ("ibmvnic: Fix failover case for non-redundant configuration") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: init init_done_rc earlierSukadev Bhattiprolu1-5/+21
We currently initialize the ->init_done completion/return code fields before issuing a CRQ_INIT command. But if we get a transport event soon after registering the CRQ the taskslet may already have recorded the completion and error code. If we initialize here, we might overwrite/ lose that and end up issuing the CRQ_INIT only to timeout later. If that timeout happens during probe, we will leave the adapter in the DOWN state rather than retrying to register/init the CRQ. Initialize the completion before registering the CRQ so we don't lose the notification. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: register netdev after init of adapterSukadev Bhattiprolu1-6/+8
Finish initializing the adapter before registering netdev so state is consistent. Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: complete init_done on transport eventsSukadev Bhattiprolu1-0/+7
If we get a transport event, set the error and mark the init as complete so the attempt to send crq-init or login fail sooner rather than wait for the timeout. Fixes: bbd669a868bb ("ibmvnic: Fix completion structure initialization") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: define flush_reset_queue helperSukadev Bhattiprolu1-8/+16
Define and use a helper to flush the reset queue. Fixes: 2770a7984db5 ("ibmvnic: Introduce hard reset recovery") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: initialize rc before completing waitSukadev Bhattiprolu1-1/+1
We should initialize ->init_done_rc before calling complete(). Otherwise the waiting thread may see ->init_done_rc as 0 before we have updated it and may assume that the CRQ was successful. Fixes: 6b278c0cb378 ("ibmvnic delay complete()") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25ibmvnic: free reset-work-item when flushingSukadev Bhattiprolu1-1/+3
Fix a tiny memory leak when flushing the reset work queue. Fixes: 2770a7984db5 ("ibmvnic: Introduce hard reset recovery") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25net: stmmac: only enable DMA interrupts when readyVincent Whitchurch1-2/+26
In this driver's ->ndo_open() callback, it enables DMA interrupts, starts the DMA channels, then requests interrupts with request_irq(), and then finally enables napi. If RX DMA interrupts are received before napi is enabled, no processing is done because napi_schedule_prep() will return false. If the network has a lot of broadcast/multicast traffic, then the RX ring could fill up completely before napi is enabled. When this happens, no further RX interrupts will be delivered, and the driver will fail to receive any packets. Fix this by only enabling DMA interrupts after all other initialization is complete. Fixes: 523f11b5d4fd72efb ("net: stmmac: move hardware setup for stmmac_open to new function") Reported-by: Lars Persson <larper@axis.com> Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25xen/netfront: destroy queues before real_num_tx_queues is zeroedMarek Marczykowski-Górecki1-16/+23
xennet_destroy_queues() relies on info->netdev->real_num_tx_queues to delete queues. Since d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ("net-sysfs: update the queue counts in the unregistration path"), unregister_netdev() indirectly sets real_num_tx_queues to 0. Those two facts together means, that xennet_destroy_queues() called from xennet_remove() cannot do its job, because it's called after unregister_netdev(). This results in kfree-ing queues that are still linked in napi, which ultimately crashes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Tainted: G W 5.16.10-1.32.fc32.qubes.x86_64+ #226 RIP: 0010:free_netdev+0xa3/0x1a0 Code: ff 48 89 df e8 2e e9 00 00 48 8b 43 50 48 8b 08 48 8d b8 a0 fe ff ff 48 8d a9 a0 fe ff ff 49 39 c4 75 26 eb 47 e8 ed c1 66 ff <48> 8b 85 60 01 00 00 48 8d 95 60 01 00 00 48 89 ef 48 2d 60 01 00 RSP: 0000:ffffc90000bcfd00 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88800edad000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffc90000bcfc30 RDI: 00000000ffffffff RBP: fffffffffffffea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88800edad050 R13: ffff8880065f8f88 R14: 0000000000000000 R15: ffff8880066c6680 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000e998c006 CR4: 00000000003706e0 Call Trace: <TASK> xennet_remove+0x13d/0x300 [xen_netfront] xenbus_dev_remove+0x6d/0xf0 __device_release_driver+0x17a/0x240 device_release_driver+0x24/0x30 bus_remove_device+0xd8/0x140 device_del+0x18b/0x410 ? _raw_spin_unlock+0x16/0x30 ? klist_iter_exit+0x14/0x20 ? xenbus_dev_request_and_reply+0x80/0x80 device_unregister+0x13/0x60 xenbus_dev_changed+0x18e/0x1f0 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Fix this by calling xennet_destroy_queues() from xennet_uninit(), when real_num_tx_queues is still available. This ensures that queues are destroyed when real_num_tx_queues is set to 0, regardless of how unregister_netdev() was called. Originally reported at https://github.com/QubesOS/qubes-issues/issues/7257 Fixes: d7dac083414eb5bb9 ("net-sysfs: update the queue counts in the unregistration path") Cc: stable@vger.kernel.org Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-25can: gs_usb: change active_channels's type from atomic_t to u8Vincent Mailhol1-5/+5
The driver uses an atomic_t variable: gs_usb:active_channels to keep track of the number of opened channels in order to only allocate memory for the URBs when this count changes from zero to one. However, the driver does not decrement the counter when an error occurs in gs_can_open(). This issue is fixed by changing the type from atomic_t to u8 and by simplifying the logic accordingly. It is safe to use an u8 here because the network stack big kernel lock (a.k.a. rtnl_mutex) is being hold. For details, please refer to [1]. [1] https://lore.kernel.org/linux-can/CAMZ6Rq+sHpiw34ijPsmp7vbUpDtJwvVtdV7CvRZJsLixjAFfrg@mail.gmail.com/T/#t Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220214234814.1321599-1-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-02-25can: etas_es58x: change opened_channel_cnt's type from atomic_t to u8Vincent Mailhol2-7/+10
The driver uses an atomic_t variable: struct es58x_device::opened_channel_cnt to keep track of the number of opened channels in order to only allocate memory for the URBs when this count changes from zero to one. While the intent was to prevent race conditions, the choice of an atomic_t turns out to be a bad idea for several reasons: - implementation is incorrect and fails to decrement opened_channel_cnt when the URB allocation fails as reported in [1]. - even if opened_channel_cnt were to be correctly decremented, atomic_t is insufficient to cover edge cases: there can be a race condition in which 1/ a first process fails to allocate URBs memory 2/ a second process enters es58x_open() before the first process does its cleanup and decrements opened_channed_cnt. In which case, the second process would successfully return despite the URBs memory not being allocated. - actually, any kind of locking mechanism was useless here because it is redundant with the network stack big kernel lock (a.k.a. rtnl_lock) which is being hold by all the callers of net_device_ops:ndo_open() and net_device_ops:ndo_close(). c.f. the ASSERST_RTNL() calls in __dev_open() [2] and __dev_close_many() [3]. The atmomic_t is thus replaced by a simple u8 type and the logic to increment and decrement es58x_device:opened_channel_cnt is simplified accordingly fixing the bug reported in [1]. We do not check again for ASSERST_RTNL() as this is already done by the callers. [1] https://lore.kernel.org/linux-can/20220201140351.GA2548@kili/T/#u [2] https://elixir.bootlin.com/linux/v5.16/source/net/core/dev.c#L1463 [3] https://elixir.bootlin.com/linux/v5.16/source/net/core/dev.c#L1541 Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Link: https://lore.kernel.org/all/20220212112713.577957-1-mailhol.vincent@wanadoo.fr Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-02-24net: mv643xx_eth: process retval from of_get_mac_addressMauri Sandberg1-10/+14
Obtaining a MAC address may be deferred in cases when the MAC is stored in an NVMEM block, for example, and it may not be ready upon the first retrieval attempt and return EPROBE_DEFER. It is also possible that a port that does not rely on NVMEM has been already created when getting the defer request. Thus, also the resources allocated previously must be freed when doing a roll-back. Fixes: 76723bca2802 ("net: mv643xx_eth: add DT parsing support") Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220223142337.41757-1-maukka@ext.kapsi.fi Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-24Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC"Mateusz Palczewski1-11/+1
Revert of a patch that instead of fixing a AQ error when trying to reset BW limit introduced several regressions related to creation and managing TC. Currently there are errors when creating a TC on both PF and VF. Error log: [17428.783095] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14 [17428.783107] i40e 0000:3b:00.1: Failed configuring TC map 0 for VSI 391 [17428.783254] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14 [17428.783259] i40e 0000:3b:00.1: Unable to configure TC map 0 for VSI 391 This reverts commit 3d2504663c41104b4359a15f35670cfa82de1bbf. Fixes: 3d2504663c41 (i40e: Fix reset bw limit when DCB enabled with 1 TC) Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220223175347.1690692-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-24bnx2x: fix driver load from initrdManish Chopra1-0/+3
Commit b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") added new firmware support in the driver with maintaining older firmware compatibility. However, older firmware was not added in MODULE_FIRMWARE() which caused missing firmware files in initrd image leading to driver load failure from initrd. This patch adds MODULE_FIRMWARE() for older firmware version to have firmware files included in initrd. Fixes: b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215627 Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220223085720.12021-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-24Revert "xen-netback: Check for hotplug-status existence before watching"Marek Marczykowski-Górecki1-8/+4
This reverts commit 2afeec08ab5c86ae21952151f726bfe184f6b23d. The reasoning in the commit was wrong - the code expected to setup the watch even if 'hotplug-status' didn't exist. In fact, it relied on the watch being fired the first time - to check if maybe 'hotplug-status' is already set to 'connected'. Not registering a watch for non-existing path (which is the case if hotplug script hasn't been executed yet), made the backend not waiting for the hotplug script to execute. This in turns, made the netfront think the interface is fully operational, while in fact it was not (the vif interface on xen-netback side might not be configured yet). This was a workaround for 'hotplug-status' erroneously being removed. But since that is reverted now, the workaround is not necessary either. More discussion at https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Michael Brown <mbrown@fensystems.co.uk> Link: https://lore.kernel.org/r/20220222001817.2264967-2-marmarek@invisiblethingslab.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-24Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"Marek Marczykowski-Górecki1-1/+1
This reverts commit 1f2565780e9b7218cf92c7630130e82dcc0fe9c2. The 'hotplug-status' node should not be removed as long as the vif device remains configured. Otherwise the xen-netback would wait for re-running the network script even if it was already called (in case of the frontent re-connecting). But also, it _should_ be removed when the vif device is destroyed (for example when unbinding the driver) - otherwise hotplug script would not configure the device whenever it re-appear. Moving removal of the 'hotplug-status' node was a workaround for nothing calling network script after xen-netback module is reloaded. But when vif interface is re-created (on xen-netback unbind/bind for example), the script should be called, regardless of who does that - currently this case is not handled by the toolstack, and requires manual script call. Keeping hotplug-status=connected to skip the call is wrong and leads to not configured interface. More discussion at https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/20220222001817.2264967-1-marmarek@invisiblethingslab.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-24net/mlx5e: Fix VF min/max rate parameters interchange mistakeGal Pressman1-1/+1
The VF min and max rate were passed incorrectly and resulted in wrongly interchanging them. Fix the order of parameters in mlx5_esw_qos_set_vport_rate(). Fixes: d7df09f5e7b4 ("net/mlx5: E-switch, Enable vport QoS on demand") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-24net/mlx5e: Add missing increment of countLama Kayal1-0/+1
Add mistakenly missing increment of count variable when looping over output buffer in mlx5e_self_test(). This resolves the issue of garbage values output when querying with self test via ethtool. before: $ ethtool -t eth2 The test result is PASS The test extra info: Link Test 0 Speed Test 1768697188 Health Test 758528120 Loopback Test 3288687 after: $ ethtool -t eth2 The test result is PASS The test extra info: Link Test 0 Speed Test 0 Health Test 0 Loopback Test 0 Fixes: 7990b1b5e8bd ("net/mlx5e: loopback test is not supported in switchdev mode") Signed-off-by: Lama Kayal <lkayal@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-22 17:28:41 +0300