summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2021-09-01octeontx2-pf: cn10K: Reserve LMTST lines per coreGeetha sowjanya6-52/+41
This patch reserves the LMTST lines per cpu instead of separate LMTST lines for NPA(buffer free) and NIX(sqe flush). LMTST line of the core on which SQ or RQ is processed is used for LMTST operation. This patch also replace STEOR with STEORL release semantics and updates driver name in ethtool file. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-01octeontx2-af: Add additional register check to rvu_poll_reg()Smadar Fuks1-1/+11
Check one more time before exiting the API with an error. Fix API to poll at least twice, in case there are other high priority tasks and this API doesn't get CPU cycles for multiple jiffies update. In addition, increase timeout from usecs_to_jiffies(10000) to usecs_to_jiffies(20000), to prevent the case that for CONFIG_100HZ timeout will be a single jiffies. A single jiffies results actual timeout that can be any time between 1usec and 10msec. To solve this, a value of usecs_to_jiffies(20000) ensures that timeout is 2 jiffies. Signed-off-by: Smadar Fuks <smadarf@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-01net: ixp46x: Remove duplicate include of module.hWan Jiabing1-1/+0
Remove repeated include of linux/module.h as it has been included at line 8. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-01bnxt_en: Fix 64-bit doorbell operation on 32-bit kernelsMichael Chan2-18/+33
The driver requires 64-bit doorbell writes to be atomic on 32-bit architectures. So we redefined writeq as a new macro with spinlock protection on 32-bit architectures. This created a new warning when we added a new file in a recent patchset. writeq is defined on many 32-bit architectures to do the memory write non-atomically and it generated a new macro redefined warning. This warning was fixed incorrectly in the recent patch. Fix this properly by adding a new bnxt_writeq() function that will do the non-atomic write under spinlock on 32-bit systems. All callers in the driver will now call bnxt_writeq() instead. v2: Need to pass in bp to bnxt_writeq() Use lo_hi_writeq() [suggested by Florian] Reported-by: kernel test robot <lkp@intel.com> Fixes: f9ff578251dc ("bnxt_en: introduce new firmware message API based on DMA pools") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski12-20/+108
include/linux/netdevice.h net/socket.c d0efb16294d1 ("net: don't unconditionally copy_from_user a struct ifreq for socket ioctls") 876f0bf9d0d5 ("net: socket: simplify dev_ifconf handling") 29c4964822aa ("net: socket: rework compat_ifreq_ioctl()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-31net: Add depends on OF_NET for LiteX's LiteETHSlark Xiao1-0/+1
Current settings may produce a build error when CONFIG_OF_NET is disabled. The CONFIG_OF_NET controls a headfile <linux/of.h> and some functions in <linux/of_net.h>. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-31net: hns3: remove unnecessary spacesHao Chen2-2/+2
This patch removes some unnecessary spaces for cleanup. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: hns3: add some required spacesHao Chen5-25/+25
Add some required spaces to improve readability. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: hns3: clean up a type mismatch warningGuojia Liao1-1/+8
abs() returns signed long, which could not convert the type as unsigned, and it may cause a mismatch type warning from static tools. To fix it, this patch uses an variable to save the abs()'s result and does a explicit conversion. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: hns3: refine function hns3_set_default_feature()Jian Shen1-46/+16
Currently, the driver sets default feature for netdev->features, netdev->hw_features, netdev->vlan_features and netdev->hw_enc_features separately. It's fussy, because most of the feature bits are same. So refine it by copy value from netdev->features. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: w5100: check return value after calling platform_get_resource()Yang Yingliang1-0/+2
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()Cai Huoqing4-36/+9
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: mdio: mscc-miim: Make use of the helper function ↵Cai Huoqing1-8/+4
devm_platform_ioremap_resource() Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()Cai Huoqing1-4/+1
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31octeontx2-af: Set proper errorcode for IPv4 checksum errorsSunil Goutham1-3/+4
With current config, for packets with IPv4 checksum errors, errorcode is being set to UNKNOWN. Hence added a separate errorcodes for outer and inner IPv4 checksum and changed NPC configuration accordingly. Also turn on L2 multicast address check in NPC protocol check block. Fixes: 6b3321bacc5a ("octeontx2-af: Enable packet length and csum validation") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31octeontx2-af: Fix static code analyzer reported issuesSubbaraya Sundeep1-3/+3
This patch fixes the static code analyzer reported issues in rvu_npc.c. The reported errors are different sizes of operands in bitops and returning uninitialized values. Fixes: 651cd2652339 ("octeontx2-af: MCAM entry installation support") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfgSubbaraya Sundeep1-3/+3
In npc_update_vf_flow_entry function the loop cursor 'index' is being changed inside the loop causing the loop to spin forever. This in turn hogs the kworker thread forever and no other mbox message is processed by AF driver after that. Fix this by using another variable in the loop. Fixes: 55307fcb9258 ("octeontx2-af: Add mbox messages to install and delete MCAM rules") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31octeontx2-af: Fix loop in free and unmap counterSubbaraya Sundeep1-1/+2
When the given counter does not belong to the entry then code ends up in infinite loop because the loop cursor, entry is not getting updated further. This patch fixes that by updating entry for every iteration. Fixes: a958dd59f9ce ("octeontx2-af: Map or unmap NPC MCAM entry and counter") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31dpaa2-eth: Replace strlcpy with strscpyJason Wang1-4/+4
The strlcpy should not be used because it doesn't limit the source length. As linus says, it's a completely useless function if you can't implicitly trust the source string - but that is almost always why people think they should use it! All in all the BSD function will lead some potential bugs. But the strscpy doesn't require reading memory from the src string beyond the specified "count" bytes, and since the return value is easier to error-check than strlcpy()'s. In addition, the implementation is robust to the string changing out from underneath it, unlike the current strlcpy() implementation. Thus, We prefer using strscpy instead of strlcpy. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31octeontx2-af: Use NDC TX for transmit packet dataGeetha sowjanya2-0/+4
For better performance set hardware to use NDC TX for reading packet data specified NIX_SEND_SG_S. Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: qualcomm: fix QCA7000 checksum handlingStefan Wahren2-2/+2
Based on tests the QCA7000 doesn't support checksum offloading. So assume ip_summed is CHECKSUM_NONE and let the kernel take care of the checksum handling. This fixes data transfer issues in noisy environments. Reported-by: Michael Heimpold <michael.heimpold@in-tech.com> Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-31net: pasemi: Remove usage of the deprecated "pci-dma-compat.h" APIChristophe JAILLET1-16/+16
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation Only relevant parts are given below. An 'unlikely()' has been removed when calling 'dma_mapping_error()' because this function, which is inlined, already has such an annotation. @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/bc6cd281eae024b26fd9c7ef6678d2d1dc9d74fd.1630150008.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-31Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski2-5/+5
Daniel Borkmann says: ==================== bpf-next 2021-08-31 We've added 116 non-merge commits during the last 17 day(s) which contain a total of 126 files changed, 6813 insertions(+), 4027 deletions(-). The main changes are: 1) Add opaque bpf_cookie to perf link which the program can read out again, to be used in libbpf-based USDT library, from Andrii Nakryiko. 2) Add bpf_task_pt_regs() helper to access userspace pt_regs, from Daniel Xu. 3) Add support for UNIX stream type sockets for BPF sockmap, from Jiang Wang. 4) Allow BPF TCP congestion control progs to call bpf_setsockopt() e.g. to switch to another congestion control algorithm during init, from Martin KaFai Lau. 5) Extend BPF iterator support for UNIX domain sockets, from Kuniyuki Iwashima. 6) Allow bpf_{set,get}sockopt() calls from setsockopt progs, from Prankur Gupta. 7) Add bpf_get_netns_cookie() helper for BPF_PROG_TYPE_{SOCK_OPS,CGROUP_SOCKOPT} progs, from Xu Liu and Stanislav Fomichev. 8) Support for __weak typed ksyms in libbpf, from Hao Luo. 9) Shrink struct cgroup_bpf by 504 bytes through refactoring, from Dave Marchevsky. 10) Fix a smatch complaint in verifier's narrow load handling, from Andrey Ignatov. 11) Fix BPF interpreter's tail call count limit, from Daniel Borkmann. 12) Big batch of improvements to BPF selftests, from Magnus Karlsson, Li Zhijian, Yucong Sun, Yonghong Song, Ilya Leoshkevich, Jussi Maki, Ilya Leoshkevich, others. 13) Another big batch to revamp XDP samples in order to give them consistent look and feel, from Kumar Kartikeya Dwivedi. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (116 commits) MAINTAINERS: Remove self from powerpc BPF JIT selftests/bpf: Fix potential unreleased lock samples: bpf: Fix uninitialized variable in xdp_redirect_cpu selftests/bpf: Reduce more flakyness in sockmap_listen bpf: Fix bpf-next builds without CONFIG_BPF_EVENTS bpf: selftests: Add dctcp fallback test bpf: selftests: Add connect_to_fd_opts to network_helpers bpf: selftests: Add sk_state to bpf_tcp_helpers.h bpf: tcp: Allow bpf-tcp-cc to call bpf_(get|set)sockopt selftests: xsk: Preface options with opt selftests: xsk: Make enums lower case selftests: xsk: Generate packets from specification selftests: xsk: Generate packet directly in umem selftests: xsk: Simplify cleanup of ifobjects selftests: xsk: Decrease sending speed selftests: xsk: Validate tx stats on tx thread selftests: xsk: Simplify packet validation in xsk tests selftests: xsk: Rename worker_* functions that are not thread entry points selftests: xsk: Disassociate umem size with packets sent selftests: xsk: Remove end-of-test packet ... ==================== Link: https://lore.kernel.org/r/20210830225618.11634-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-31sch_htb: Fix inconsistency when leaf qdisc creation failsMaxim Mikityanskiy3-13/+9
In HTB offload mode, qdiscs of leaf classes are grafted to netdev queues. sch_htb expects the dev_queue field of these qdiscs to point to the corresponding queues. However, qdisc creation may fail, and in that case noop_qdisc is used instead. Its dev_queue doesn't point to the right queue, so sch_htb can lose track of used netdev queues, which will cause internal inconsistencies. This commit fixes this bug by keeping track of the netdev queue inside struct htb_class. All reads of cl->leaf.q->dev_queue are replaced by the new field, the two values are synced on writes, and WARNs are added to assert equality of the two values. The driver API has changed: when TC_HTB_LEAF_DEL needs to move a queue, the driver used to pass the old and new queue IDs to sch_htb. Now that there is a new field (offload_queue) in struct htb_class that needs to be updated on this operation, the driver will pass the old class ID to sch_htb instead (it already knows the new class ID). Fixes: d03b195b5aa0 ("sch_htb: Hierarchical QoS hardware offload") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20210826115425.1744053-1-maximmi@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-30ixp4xx_eth: Probe the PTP module from the device treeLinus Walleij1-2/+13
This adds device tree probing support for the PTP module adjacent to the ethernet module. It is pretty straight forward, all resources are in the device tree as they come to the platform device. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30ixp4xx_eth: Stop referring to GPIOsLinus Walleij1-56/+28
The driver is being passed interrupts, then looking up the same interrupts as GPIOs a second time to convert them into interrupts and set properties on them. This is pointless: the GPIO and irqchip APIs of a GPIO chip are orthogonal. Just request the interrupts and be done with it, drop reliance on any GPIO functions or definitions. Use devres-managed functions and add a small devress quirk to unregister the clock as well and we can rely on devres to handle all the resources and cut down a bunch of boilerplate in the process. Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30ixp4xx_eth: fix compile-testingArnd Bergmann1-4/+3
Change the driver to use portable integer types to avoid warnings during compile testing, including: drivers/net/ethernet/xscale/ixp4xx_eth.c:721:21: error: cast to 'u32 *' (aka 'unsigned int *') from smaller integer type 'int' [-Werror,-Wint-to-pointer-cast] memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4); ^ drivers/net/ethernet/xscale/ixp4xx_eth.c:963:12: error: incompatible pointer types passing 'u32 *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types] &port->desc_tab_phys))) ^~~~~~~~~~~~~~~~~~~~ include/linux/dmapool.h:27:20: note: passing argument to parameter 'handle' here dma_addr_t *handle); ^ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30ixp4xx_eth: make ptp support a platform driverArnd Bergmann5-34/+78
After the recent ixp4xx cleanups, the ptp driver has gained a build failure in some configurations: drivers/net/ethernet/xscale/ptp_ixp46x.c: In function 'ptp_ixp_init': drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: error: 'IXP4XX_TIMESYNC_BASE_VIRT' undeclared (first use in this function) Avoid the last bit of hardcoded constants from platform headers by turning the ptp driver bit into a platform driver and passing the IRQ and MMIO address as resources. This is a bit tricky: - The interface between the two drivers is now the new ixp46x_ptp_find() function, replacing the global ixp46x_phc_index variable. The call is done as late as possible, in hwtstamp_set(), to ensure that the ptp device is fully probed. - As the ptp driver is now called by the network driver, the link dependency is reversed, which in turn requires a small Makefile hack - The GPIO number is still left hardcoded. This is clearly not great, but it can be addressed later. Note that commit 98ac0cc270b7 ("ARM: ixp4xx: Convert to MULTI_IRQ_HANDLER") changed the IRQ number to something meaningless. Passing the correct IRQ in a resource fixes this. - When the PTP driver is disabled, ethtool .get_ts_info() now correctly lists only software timestamping regardless of the hardware. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [Fix a missing include] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: uniform parameter name of hclge_ptp_clean_tx_hwts()Hao Chen1-1/+1
The parameter name of hclge_ptp_clean_tx_hwts() in declaration is "dev", but the definition of this function is used the common name "hdev" as other functions, so modify it. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hnss3: use max() to simplify codeHao Chen1-2/+1
Replace the "? :" statement wich max() to simplify code. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: modify a print format of hns3_dbg_queue_map()Hao Chen1-1/+1
The type of tqp_vector->vector_irq is int, so modify its print format to "%d". Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: refine function hclge_dbg_dump_tm_pri()Guangbin Huang1-28/+42
To improve flexibility, simplicity and maintainability to dump info of every element of tm priority, add a struct hclge_dbg_item array of tm priority and fill string of every data according to this array. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: reconstruct function hclge_ets_validate()Guangbin Huang1-12/+35
This patch reconstructs function hclge_ets_validate() to reduce the code cycle complexity and make code more concise. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: reconstruct function hns3_self_testPeng Li1-37/+64
This patch reconstructs function hns3_self_test to reduce the code cycle complexity and make code more concise. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: initialize each member of structure array on a separate lineJiaran Zhang1-549/+1116
To make the format of each member initialization of structure array clearer, initialize each member on a separate line. Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: support multiple HWRM commands in flightEdwin Peer4-39/+113
Add infrastructure to maintain a pending list of HWRM commands awaiting completion and reduce the scope of the hwrm_cmd_lock mutex so that it protects only the request mailbox. The mailbox is free to use for one or more concurrent commands after receiving deferred response events. For uniformity and completeness, use the same pending list for collecting completions for commands that respond via a completion ring. These commands are only used for freeing rings and for IRQ test and we only support one such command in flight. Note deferred responses are also only supported on the main channel. The secondary channel (KONG) does not support deferred responses. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: remove legacy HWRM interfaceEdwin Peer4-106/+1
There are no longer any callers relying on the old API. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: update all firmware calls to use the new APIsEdwin Peer9-1538/+1953
The conversion follows this general pattern for most of the calls: 1. The input message is changed from a stack variable initialized using bnxt_hwrm_cmd_hdr_init() to a pointer allocated and intialized using hwrm_req_init(). 2. If we don't need to read the firmware response, the hwrm_send_message() call is replaced with hwrm_req_send(). 3. If we need to read the firmware response, the mutex lock is replaced by hwrm_req_hold() to hold the response. When the response is read, the mutex unlock is replaced by hwrm_req_drop(). If additional DMA buffers are needed for firmware response data, the hwrm_req_dma_slice() is used instead of calling dma_alloc_coherent(). Some minor refactoring is also done while doing these conversions. v2: Fix unintialized variable warnings in __bnxt_hwrm_get_tx_rings() and bnxt_approve_mac() Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: use link_lock instead of hwrm_cmd_lock to protect link_infoEdwin Peer2-2/+7
We currently use the hwrm_cmd_lock to serialize the update of the firmware's link status response data and the copying of link status data to the VF. This won't work when we update the firmware message APIs, so we use the link_lock mutex instead. All link_info data should be updated under the link_lock mutex. Also add link_lock to functions that touch link_info in __bnxt_open_nic() and bnxt_probe_phy(). The locking is probably not strictly necessary during probe, but it's more consistent. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: add support for HWRM request slicesEdwin Peer2-2/+120
Slices are a mechanism for suballocating DMA mapped regions from the request buffer. Such regions can be used for indirect command data instead of creating new mappings with dma_alloc_coherent(). The advantage of using a slice is that the lifetime of the slice is bound to the request and will be automatically unmapped when the request is consumed. A single external region is also supported. This allows for regions that will not fit inside the spare request buffer space such that the same API can be used consistently even for larger mappings. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: add HWRM request assignment APIEdwin Peer2-0/+56
hwrm_req_replace() provides an assignment like operation to replace a managed HWRM request object with data from a pre-built source. This is useful for handling request data provided by higher layer HWRM clients. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: discard out of sequence HWRM responsesEdwin Peer1-4/+17
During firmware crash recovery, it is possible for firmware to respond to stale HWRM commands that have already timed out. Because response buffers may be reused, any out of sequence responses need to be ignored and only the matching seq_id should be accepted. Also, READ_ONCE should be used for the reads from the DMA buffer to ensure that the necessary loads are scheduled. Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: introduce new firmware message API based on DMA poolsEdwin Peer4-121/+442
This change constitutes a major step towards supporting multiple firmware commands in flight by maintaining a separate response buffer for the duration of each request. These firmware commands are also known as Hardware Resource Manager (HWRM) commands. Using separate response buffers requires an API change in order for callers to be able to free the buffer when done. It is impossible to keep the existing APIs unchanged. The existing usage for a simple HWRM message request such as the following: struct input req = {0}; bnxt_hwrm_cmd_hdr_init(bp, &req, REQ_TYPE, -1, -1); rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT); if (rc) /* error */ changes to: struct input *req; rc = hwrm_req_init(bp, req, REQ_TYPE); if (rc) /* error */ rc = hwrm_req_send(bp, req); /* consumes req */ if (rc) /* error */ The key changes are: 1. The req is no longer allocated on the stack. 2. The caller must call hwrm_req_init() to allocate a req buffer and check for a valid buffer. 3. The req buffer is automatically released when hwrm_req_send() returns. 4. If the caller wants to check the firmware response, the caller must call hwrm_req_hold() to take ownership of the response buffer and release it afterwards using hwrm_req_drop(). The caller is no longer required to explicitly hold the hwrm_cmd_lock mutex to read the response. 5. Because the firmware commands and responses all have different sizes, some safeguards are added to the code. This patch maintains legacy API compatibiltiy, implementing the old API in terms of the new. The follow-on patches will convert all callers to use the new APIs. v2: Fix redefined writeq with parisc .config Fix "cast from pointer to integer of different size" warning in hwrm_calc_sentinel() Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: move HWRM API implementation into separate fileEdwin Peer13-357/+407
Move all firmware messaging functions and definitions to new bnxt_hwrm.[ch]. The follow-on patches will make major modifications to these APIs. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: Refactor the HWRM_VER_GET firmware callsEdwin Peer1-6/+11
Refactor the code so that __bnxt_hwrm_ver_get() does not call bnxt_hwrm_do_send_msg() directly. The new APIs will not expose this internal call. Add a new bnxt_hwrm_poll() to poll the HWRM_VER_GET firmware call silently. The other bnxt_hwrm_ver_get() function will send the HWRM_VER_GET message directly with error logs enabled. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30bnxt_en: remove DMA mapping for KONG responseEdwin Peer2-51/+7
The additional response buffer serves no useful purpose. There can be only one firmware command in flight due to the hwrm_cmd_lock mutex, which is taken for the entire duration of any command completion, KONG or otherwise. It is thus safe to share a single DMA buffer. Removing the code associated with the additional mapping will simplify matters in the next patch, which allocates response buffers from DMA pools on a per request basis. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-29Merge tag 'wireless-drivers-next-2021-08-29' of ↵David S. Miller74-806/+2184
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== pull-request: wireless-drivers-next-2021-08-29 here's a pull request to net-next tree, more info below. Please let me know if there are any problems. wireless-drivers-next patches for v5.15 Second, and most likely last, set of patches for v5.15. Lots of iwlwifi patches this time, but smaller changes to other drivers as well. Nothing special standing out. Major changes: rtw88 * add quirk to disable pci caps on HP Pavilion 14-ce0xxx brcmfmac * Add WPA3 Personal with FT to supported cipher suites wcn36xx * allow firmware name to be overridden by DT iwlwifi * support scanning hidden 6GHz networks * support for a new hardware family (Bz) * support for new firmware API versions mwifiex * add reset_d3cold quirk for Surface gen4+ devices ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-29intel: switch from 'pci_' to 'dma_' APIChristophe JAILLET5-92/+77
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/f55043d0c847bfae60087707778563cf732a7bf9.1629619229.git.christophe.jaillet@wanadoo.fr
2021-08-29mwifiex: pcie: add reset_d3cold quirk for Surface gen4+ devicesTsuchiya Yuto3-0/+133
To reset mwifiex on Surface gen4+ (Pro 4 or later gen) devices, it seems that putting the wifi device into D3cold is required according to errata.inf file on Windows installation (Windows/INF/errata.inf). This patch adds a function that performs power-cycle (put into D3cold then D0) and call the function at the end of reset_prepare(). Note: Need to also reset the parent device (bridge) of wifi on SB1; it might be because the bridge of wifi always reports it's in D3hot. When I tried to reset only the wifi device (not touching parent), it gave the following error and the reset failed: acpi device:4b: Cannot transition to power state D0 for parent in D3hot mwifiex_pcie 0000:03:00.0: can't change power state from D3cold to D0 (config space inaccessible) Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210820142050.35741-3-verdre@v0yd.nl
2021-08-29mwifiex: pcie: add DMI-based quirk implementation for Surface devicesJonas Dreßler5-0/+64
This commit adds the ability to apply device-specific quirks to the mwifiex driver. It uses DMI matching similar to the quirks brcmfmac uses with dmi.c. We'll add identifiers to match various MS Surface devices, which this is primarily meant for, later. This commit is a slightly modified version of a previous patch sent in by Tsuchiya Yuto. Co-developed-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Jonas Dreßler <verdre@v0yd.nl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210820142050.35741-2-verdre@v0yd.nl
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-19 15:29:22 +0300