summaryrefslogtreecommitdiff
path: root/drivers/nfc/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-02NFC: remove TI nfcwilink driverRob Herring1-1/+0
It appears that TI WiLink devices including NFC (WL185x/WL189x) never shipped. The only information I found were announcements in Feb 2012 about the parts. There's been no activity on this driver besided common changes since initially added in Jan 2012. There's also no in users that instantiate the platform device (nor DT bindings). This is a first step in removing TI ST (shared transport) driver in favor of extending the BT hci_ll driver to support WL183x chips. Cc: Ilan Elias <ilane@ti.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-04-10NFC: pn533: Separate physical layer from the core implementationMichael Thalmeier1-1/+1
The driver now has all core stuff isolated in one file, and all the hardware link specifics in another. Writing a pn533 driver on top of another hardware link is now just a matter of adding a new file for that new hardware specifics. The first user of this separation will be the i2c based pn532 driver that reuses pn533 core implementation on top of an i2c layer. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29NFC: Add STMicroelectronics ST95HF driverShikha Singh1-0/+1
This driver supports STMicroelectronics NFC Transceiver "ST95HF", in in initiator role to read/write ISO14443 Type 4A, ISO14443 Type 4B and ISO15693 Type5 tags. The ST95HF datasheet is available here: http://www.st.com/web/en/resource/technical/document/datasheet/DM00102056.pdf Signed-off-by: Shikha Singh <shikha.singh@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: Add Intel Fields Peak NFC solution driverRobert Dolca1-0/+1
Fields Peak complies with the ISO/IEC 14443A/B, 15693, 18092, and JIS X 6319-4. It is an NCI based controller. RF Protocols supported: - NFC Forum Type 1 Tags (Jewel, Topaz) - NFC Forum Type 2 Tags (Mifare UL) - NFC Forum Type 3 Tags (FeliCa) - NFC Forum Type 4A (ISO/IEC 14443 A-4 106kbps to 848kbps) - NFC Forum Type 4B (ISO/IEC 14443 B-4 106kbps to 848kbps) - NFCIP in passive and active modes (ISO/IEC 18092 106kbps to 424kbps) - B’ (based on ISO/IEC 14443 B-2) - iCLASS (based on ISO/IEC 15693-2) - Vicinity cards (ISO/IEC 15693-3) - Kovio tags (NFC Forum Type 2) The device can be enumerated using ACPI using the id INT339A. The 1st GPIO is the IRQ and the 2nd is the RESET pin. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-08-20nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC ChipRobert Baldyga1-0/+1
Add driver for Samsung S3FWRN5 NFC controller. S3FWRN5 is using NCI protocol and I2C communication interface. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-10nfc: st-nci: Rename st21nfcb to st-nciChristophe Ricard1-1/+1
STMicroelectronics NFC NCI chips family is extending with the new ST21NFCC using the AMS AS39230 RF booster. The st21nfcb driver is relevant for this solution and might be with future products. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-06-09NFC: Remove obsolete setting of DEBUGValentin Rothberg1-2/+0
CONFIG_DYNAMIC_DEBUG is the right toggle to enable pr_debug(). Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-03-26NFC: nxp-nci: Add support for NXP NCI chipsClément Perrochaud1-0/+1
Add support for NXP NCI NFC controllers such as the NPC100 or PN7150 families. Signed-off-by: Clément Perrochaud <clement.perrochaud@effinnov.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-23NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chipChristophe Ricard1-1/+2
Add driver for STMicroelectronics ST21NFCB NFC controller. ST21NFCB is using NCI protocol and a proprietary low level transport protocol called NDLC used on top. NDLC: The protocol defines 2 types of frame: - One type carrying NCI data (referred as DATAFRAME frames). - One type carrying protocol information used for flow control and error control mechanisms (referred as SUPERVISOR frames). After each frame transmission to the NFC controller, the device host SHALL waitfor an ACK (SUPERVISOR frame) reception before sending a new frame. The NFC controller MAY send a frame at anytime to the device host. The NFC controller MAY send a specific WAIT supervisor frame to indicate to device host that a NCI data packet has been received but that it could take significant time before the NFC controller sends an ACK and thus allows next data reception. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-04-22NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC ChipChristophe Ricard1-0/+1
Add driver for STMicroelectronics ST21NFCA NFC controller. ST21NFCA is using HCI protocol, shdlc as LLC layer & I2C as communication protocol. Adding support for Reader/Writer mode with Tag type 1/2/3/4 A & B. It is using proprietary gate 15 for ISO14443-3 such as type 1 & type 2 tags. It is using proprietary gate 14 for type F tags. ST21NFCA_DEVICE_MGNT_GATE gives access to proprietary CLF configuration. Standard gate for ISO14443-4 A (13) & B (11) are also used. ST21NFCA specific mecanism: One particular point to notice for the data handling is that frame does not contain any length value. Therefore the i2c part of this driver is managing the reception with a read length sequence until the end of frame (0x7e) is reached. In order to avoid conflict between sof & eof a mecanism called byte stuffing concist of an escape byte (0x7d) insertion before special byte (0x7e, 0x7d). The special byte is then xored with 0x20. In this driver, When data are available in the CLF, the interrupt gpio is driven to active state and triggered an interrupt. Once the i2c_master_recv start, the interrupt gpio is driven to idle state until its complete. If the frame is incomplete or data are still available, interrupts will be triggered again. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-03-11NFC: trf7970a: Add driver with ISO/IEC 14443 Type 2 Tag SupportMark A. Greer1-0/+1
Add a driver for the Texas Instruments TRF7970a RFID/NFC/15693 transceiver. The driver currently supports ISO/IEC 14443 Type 2 tags only (MIFARE Ultralight and Ultralight C but not Classic). CC: Erick Macias <emacias@ti.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-07NFC: nfcmrvl: Initial commit for Marvell NFC driverAmitkumar Karwar1-0/+1
This patch adds NFC support for Marvell 8897 NFC-over-USB chipset. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-10-07NFC: Sony Port-100 Series driverThierry Escande1-0/+1
This adds support for the Sony NFC USB dongle RC-S380, based on the Port-100 chip. This dongle is an analog frontend and does not implement the digital layer. This driver uses the nfc_digital module which is an implementation of the NFC Digital Protocol stack. This patch is a skeleton. It only registers the dongle against the NFC digital protocol stack. All NFC digital operation functions are stubbed out. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Cc: Stephen Tiedemann <stephen.tiedemann@gmail.com> Tested-by: Cho, Yu-Chen <acho@suse.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14NFC: Add a nfc hardware simulation driverThierry Escande1-0/+1
This driver declares two virtual NFC devices supporting NFC-DEP protocol. An LLCP connection can be established between them and all packets sent from one device is sent back to the other, acting as loopback devices. Once established, the LLCP link can be disconnected by disabling the target device (with rfkill, nfctool, or neard disable-adapter test script). Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-16NFC: mei: Add a common mei bus API for NFC driversEric Lapuyade1-0/+1
This isolates the common code that is required to use an mei bus nfc device from an NFC HCI drivers. This prepares for future drivers for NFC chips connected behind an Intel Management Engine controller. The microread_mei HCI driver is also modified to use that common code. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-03NFC: Initial support for Inside Secure microreadEric Lapuyade1-0/+1
Inside Secure microread is an HCI based NFC chipset. This initial support includes reader and p2p (Target and initiator) modes. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-01-10NFC: pn544: Separate the core code and the i2c one into different modulesSamuel Ortiz1-1/+1
As we may need to support other physical layers, we can avoid linking the core part into each and every pn544 module. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-10-26NFC: Separate pn544 hci driver in HW dependant and independant partsEric Lapuyade1-1/+1
The driver now has all HCI stuff isolated in one file, and all the hardware link specifics in another. Writing a pn544 driver on top of another hardware link is now just a matter of adding a new file for that new hardware specifics. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-25NFC: Remove the pn544 raw driverCong Wang1-1/+0
This was scheduled for 3.6, we're late. Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-16NFC: HCI based pn544 driverEric Lapuyade1-0/+1
This is an NFC driver for NXP pn544. Unlike pn544.c, this one is based on the NFC HCI and SHDLC kernel layers. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-20NFC: driver for TI shared transportIlan Elias1-0/+1
Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05NFC: pn533: add NXP pn533 nfc device driverAloisio Almeida Jr1-0/+1
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-05NFC: add nfc subsystem coreLauro Ramos Venancio1-0/+2
The NFC subsystem core is responsible for providing the device driver interface. It is also responsible for providing an interface to the control operations and data exchange. Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-13NFC: Driver for NXP Semiconductors PN544 NFC chip.Matti J. Aaltonen1-0/+5
Creates a new "Near Field Communication" subsystem in drivers/nfc. http://en.wikipedia.org/wiki/Near_Field_Communication is useful ;) This is a driver for the pn544 NFC device. The driver transfers ETSI messages between the device and the user space. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>