| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit d15dcd0f1a4753b57e66c64c8dc2a9779ff96aab ]
The nsid value is a u32 that comes from nvmet_req_find_ns(). It's
endian data and we're on an error path and both of those raise red
flags. So let's make this safer.
1) Make the buffer large enough for any u32.
2) Remove the unnecessary initialization.
3) Use snprintf() instead of sprintf() for even more safety.
4) The sprintf() function returns the number of bytes printed, not
counting the NUL terminator. It is impossible for the return value to
be <= 0 so delete that.
Fixes: 505363957fad ("nvmet: fix nvme status code when namespace is disabled")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 50abcc179e0c9ca667feb223b26ea406d5c4c556 ]
TLS requires a strict pdu pacing via MSG_EOR to signal the end
of a record and subsequent encryption. If we do not set MSG_EOR
at the end of a sequence the record won't be closed, encryption
doesn't start, and we end up with a send stall as the message
will never be passed on to the TCP layer.
So do not check for the queue status when TLS is enabled but
rather make the MSG_MORE setting dependent on the current
request only.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 505363957fad35f7aed9a2b0d8dad73451a80fb5 ]
If the user disabled a nvmet namespace, it is removed from the subsystem
namespaces list. When nvmet processes a command directed to an nsid that
was disabled, it cannot differentiate between a nsid that is disabled
vs. a non-existent namespace, and resorts to return NVME_SC_INVALID_NS
with the dnr bit set.
This translates to a non-retryable status for the host, which translates
to a user error. We should expect disabled namespaces to not cause an
I/O error in a multipath environment.
Address this by searching a configfs item for the namespace nvmet failed
to find, and if we found one, conclude that the namespace is disabled
(perhaps temporarily). Return NVME_SC_INTERNAL_PATH_ERROR in this case
and keep DNR bit cleared.
Reported-by: Jirong Feng <jirong.feng@easystack.cn>
Tested-by: Jirong Feng <jirong.feng@easystack.cn>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6825bdde44340c5a9121f6d6fa25cc885bd9e821 ]
When we teardown the controller, we wait for pending I/Os to complete
(sq->ref on all queues to drop to zero) and then we go over the commands,
and free their command buffers in case they are still fetching data from
the host (e.g. processing nvme writes) and have yet to take a reference
on the sq.
However, we may miss the case where commands have failed before executing
and are queued for sending a response, but will never occur because the
queue socket is already down. In this case we may miss deallocating command
buffers.
Solve this by freeing all commands buffers as nvmet_tcp_free_cmd_buffers is
idempotent anyways.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25bb3534ee21e39eb9301c4edd7182eb83cb0d07 ]
While I/O is running, if the pci bus error occurs then
in-flight I/O can not complete. Worst, if at this time,
user (logically) hot-unplug the nvme disk then the
nvme_remove() code path can't forward progress until
in-flight I/O is cancelled. So these sequence of events
may potentially hang hot-unplug code path indefinitely.
This patch helps cancel the pending/in-flight I/O from the
nvme request timeout handler in case the nvme controller
is in the terminal (DEAD/DELETING/DELETING_NOIO) state and
that helps nvme_remove() code path forward progress and
finish successfully.
Link: https://lore.kernel.org/all/199be893-5dfa-41e5-b6f2-40ac90ebccc4@linux.ibm.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 445f9119e70368ccc964575c2a6d3176966a9d65 ]
In nvmet_auth_host_hash(), if a mismatch is detected in the hash length
the kernel should print an error.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 46b8f9f74f6d500871985e22eb19560b21f3bc81 ]
If the nvmet_auth_host_hash() function fails, the error code should
be returned to its callers.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 863fe60ed27f2c85172654a63c5b827e72c8b2e6 ]
On system where native nvme multipath is configured and iopolicy
is set to numa but the nvme controller numa node id is undefined
or -1 (NUMA_NO_NODE) then avoid calculating node distance for
finding optimal io path. In such case we may access numa distance
table with invalid index and that may potentially refer to incorrect
memory. So this patch ensures that if the nvme controller numa node
id is -1 then instead of calculating node distance for finding optimal
io path, we set the numa node distance of such controller to default 10
(LOCAL_DISTANCE).
Link: https://lore.kernel.org/all/20240413090614.678353-1-nilay@linux.ibm.com/
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d5887dc6b6c054d0da3cd053afc15b7be1f45ff6 upstream.
Sandisk SN530 NVMe drives have broken MSIs. On systems without MSI-X
support, all commands time out resulting in the following message:
nvme nvme0: I/O tag 12 (100c) QID 0 timeout, completion polled
These timeouts cause the boot to take an excessively-long time (over 20
minutes) while the initial command queue is flushed.
Address this by adding a quirk for drives with buggy MSIs. The lspci
output for this device (recorded on a system with MSI-X support) is:
02:00.0 Non-Volatile memory controller: Sandisk Corp Device 5008 (rev 01) (prog-if 02 [NVM Express])
Subsystem: Sandisk Corp Device 5008
Flags: bus master, fast devsel, latency 0, IRQ 16, NUMA node 0
Memory at f7e00000 (64-bit, non-prefetchable) [size=16K]
Memory at f7e04000 (64-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 3
Capabilities: [90] MSI: Enable- Count=1/32 Maskable- 64bit+
Capabilities: [b0] MSI-X: Enable+ Count=17 Masked-
Capabilities: [c0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [1b8] Latency Tolerance Reporting
Capabilities: [300] Secondary PCI Express
Capabilities: [900] L1 PM Substates
Kernel driver in use: nvme
Kernel modules: nvme
Cc: <stable@vger.kernel.org>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0bc2e80b9be51712b19e919db5abc97a418f8292 ]
Move the stray '.' that is currently at the end of the line after
newline '\n' to before newline character which is the right position.
Fixes: ce8d78616a6b ("nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH")
Signed-off-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e89086c43f0500bc7c4ce225495b73b8ce234c1f ]
This commit adds NVME_QUIRK_NO_DEEPEST_PS and NVME_QUIRK_BOGUS_NID for
device [126f:2262], which appears to be a generic VID:PID pair used for
many SSDs based on the Silicon Motion SM2262/SM2262EN controller.
Two of my SSDs with this VID:PID pair exhibit the same behavior:
* They frequently have trouble exiting the deepest power state (5),
resulting in the entire disk unresponsive.
Verified by setting nvme_core.default_ps_max_latency_us=10000 and
observing them behaving normally.
* They produce all-zero nguid and eui64 with `nvme id-ns` command.
The offending products are:
* HP SSD EX950 1TB
* HIKVISION C2000Pro 2TB
Signed-off-by: Jiawei Fu <i@ibugone.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit de105068fead55ed5c07ade75e9c8e7f86a00d1d ]
We found a issue on production environment while using NVMe over RDMA,
admin_q reconnect failed forever while remote target and network is ok.
After dig into it, we found it may caused by a ABBA deadlock due to tag
allocation. In my case, the tag was hold by a keep alive request
waiting inside admin_q, as we quiesced admin_q while reset ctrl, so the
request maked as idle and will not process before reset success. As
fabric_q shares tagset with admin_q, while reconnect remote target, we
need a tag for connect command, but the only one reserved tag was held
by keep alive command which waiting inside admin_q. As a result, we
failed to reconnect admin_q forever. In order to fix this issue, I
think we should keep two reserved tags for admin queue.
Fixes: ed01fee283a0 ("nvme-fabrics: only reserve a single tag")
Signed-off-by: Chunguang Xu <chunguang.xu@shopee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d0d2447394b13fb22a069f0330f9c49b7fff9d3 ]
When nvme_identify_ns() fails, it frees the pointer to the struct
nvme_id_ns before it returns. However, ns_update_nuse() calls kfree()
for the pointer even when nvme_identify_ns() fails. This results in
KASAN double-free, which was observed with blktests nvme/045 with
proposed patches [1] on the kernel v6.8-rc7. Fix the double-free by
skipping kfree() when nvme_identify_ns() fails.
Link: https://lore.kernel.org/linux-block/20240304161303.19681-1-dwagner@suse.de/ [1]
Fixes: a1a825ab6a60 ("nvme: add csi, ms and nuse to sysfs")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Remove superfluous initialization of status variable in
nvmet_execute_admin_connect() and nvmet_execute_io_connect(), since it
will get overwritten by nvmet_copy_from_sgl().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
NVM Express TP4167 provides a way for controllers to report a relaxed
execution constraint. Specifically, it notifies of exclusivity for IO
vs. admin commands instead of grouping these together. If set, then we
don't need to freeze IO in order to execute that admin command. The
freezing distrupts IO processes, so it's nice to avoid that if the
controller tells us it's not necessary.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In nvmf_connect_io_queue(), if connect I/O command fails, we log the
error and continue for authentication. This overrides error captured
from __nvme_submit_sync_cmd(), causing wrong return value.
Add goto out_free_data after logging connect error to fix the issue.
Fixes: f50fff73d620c ("nvme: implement In-Band authentication")
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Currently kernel supports 8 byte and 16 byte protection information.
So, use ns->head->pi_size instead of sizeof(struct t10_pi_tuple).
Signed-off-by: Francis Pravin <francis.p@samsung.com>
Signed-off-by: Sathyavathi M <sathya.m@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The functions and the attribute listed in the comment doesn't exists in
the code, (ns->logging_enabled, nvme_passthru_err_log_enabled_store()
and nvme_passthru_err_log_enabled_show())
Update the comment with right function names and a comment
ns->head->passthru_err_log_enabled,
nvme_io_passthru_err_log_enabled_store() and
nvme_io_passthru_err_log_enabled_show().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The namespace does not have attributes, but the head does. Move the new
logging attribute to that structure instead of dereferencing the wrong
type.
And while we're here, fix the reverse-tree coding style.
Fixes: 9f079dda14339e ("nvme: allow passthru cmd error logging")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Tested-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The original code didn't update the firmware version if the
"next slot" of the AFI register isn't zero or if the
"current slot" field is zero; in those cases it assumed
that a reset was needed.
However, the NVMe specification doesn't exclude the possibility that
the "next slot" value is equal to the "current slot" value,
meaning that the same firmware slot will be activated after performing
a controller level reset; in this case a reset is clearly not
necessary and we can safely update the firmware version.
Modify the code so the kernel will report that a Controller Level Reset
is needed only in the following cases:
1) If the "current slot" field is zero. This is invalid and means that
something is wrong, a reset is needed.
or
2) if the "next slot" field isn't zero AND it's not equal to the
"current slot" value. This means that at the next reset a different
firmware slot will be activated.
Fixes: 983a338b96c8 ("nvme: update firmware version after commit")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Commit d7ac8dca938c ("nvme: quiet user passthrough command errors")
disabled error logging for user passthrough commands. This commit
adds the ability to opt-in to passthrough admin error logging. IO
commands initiated as passthrough will always be logged.
The logging output for passthrough commands (Admin and IO) has been
changed to include CDWXX fields.
nvme0n1: Read(0x2), LBA Out of Range (sct 0x0 / sc 0x80) DNR cdw10=0x0 cdw11=0x1
cdw12=0x70000 cdw13=0x0 cdw14=0x0 cdw15=0x0
Add a helper function nvme_log_err_passthru() which allows us to log
error for passthru commands by decoding cdw10-cdw15 values of nvme
command.
Add a new sysfs attr passthru_err_log_enabled that allows user to conditionally
enable passthrough command logging for either passthrough Admin commands sent to
the controller or passthrough IO commands sent to a namespace.
By default, passthrough error logging is disabled.
To enable passthrough admin error logging:
echo 1 > /sys/class/nvme/nvme0/passthru_err_log_enabled
To disable passthrough admin error logging:
echo 0 > /sys/class/nvme/nvme0/passthru_err_log_enabled
To enable passthrough io error logging:
echo 1 > /sys/class/nvme/nvme0/nvme0n1/passthru_err_log_enabled
To disable passthrough io error logging:
echo 0 > /sys/class/nvme/nvme0/nvme0n1/passthru_err_log_enabled
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Log hostnqn when connecting to nvme target.
As hostnqn could be changed, logging this information
in syslog at appropriate time may help in troubleshooting.
Signed-off-by: Nitin U. Yewale <nyewale@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Log hostnqn when connecting to nvme target.
As hostnqn could be changed, logging this information
in syslog at appropriate time may help in troubleshooting.
Signed-off-by: Nitin U. Yewale <nyewale@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Log hostnqn when connecting to nvme target.
As hostnqn could be changed, logging this information
in syslog at appropriate time may help in troubleshooting.
Signed-off-by: Nitin U. Yewale <nyewale@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The assoc_list is a RCU protected list, thus use the RCU flavor of list
functions.
Let's use this opportunity and refactor this code and move the lookup
into a helper and give it a descriptive name.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We have to ensure that the tgtport is not going away
before be have remove all the associations.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When deleting an association the shutdown path is deadlocking because we
try to flush the nvmet_wq nested. Avoid this by deadlock by deferring
the put work into its own work item.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When the target port has not active port binding, there is no point in
trying to process the command as it has to fail anyway. Instead adding
checks to all commands abort the command early.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The association life time is tied to the life time of the target port.
That means we should not take extra a refcount when creating a
association.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
An association has always a valid hostport pointer. Remove useless
null pointer check.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The hostport data structure is shared between the association, this why
we keep track of the users via a refcount. So we should not decrement
the refcount on a match and free the hostport several times.
Reported by KASAN.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Neither struct nvmet_fc_tgt_queue nor struct nvmet_fc_tgt_assoc are data
structure which are used in a RCU context. So there is no reason to
delay the free operation.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When the target executes a disconnect and the host triggers a reconnect
immediately, the reconnect command still finds an existing association.
The reconnect crashes later on because nvmet_fc_delete_target_assoc
blindly removes resources while the reconnect code wants to use it.
To address this, nvmet_fc_find_target_assoc should not be able to
lookup an association which is being removed. The association list
is already under RCU lifetime management, so let's properly use it
and remove the association from the list and wait for a grace period
before cleaning up all. This means we also can drop the RCU management
on the queues, because this is now handled via the association itself.
A second step split the execution context so that the initial disconnect
command can complete without running the reconnect code in the same
context. As usual, this is done by deferring the ->done to a workqueue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In case we return early out of __nvmet_fc_finish_ls_req() we still have
to release the reference on the target port.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The first argument of list_add_tail function is the new element which
should be added to the list which is the second argument. Swap the
arguments to allow processing more than one element at a time.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The module exit path has race between deleting all controllers and
freeing 'left over IDs'. To prevent double free a synchronization
between nvme_delete_ctrl and ida_destroy has been added by the initial
commit.
There is some logic around trying to prevent from hanging forever in
wait_for_completion, though it does not handling all cases. E.g.
blktests is able to reproduce the situation where the module unload
hangs forever.
If we completely rely on the cleanup code executed from the
nvme_delete_ctrl path, all IDs will be freed eventually. This makes
calling ida_destroy unnecessary. We only have to ensure that all
nvme_delete_ctrl code has been executed before we leave
nvme_fc_exit_module. This is done by flushing the nvme_delete_wq
workqueue.
While at it, remove the unused nvme_fc_wq workqueue too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The fc transport logs the opcode and fctype on command timeout.
This is sufficient information to identify the command issued,
but not very human-readable. Use the nvme_fabrics_opcode_str()
helper to also log the name of the command, as rdma and tcp already do.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvme_opcode_str() currently supports admin, IO, and fabrics commands.
However, fabrics commands aren't allowed for the pci transport.
Currently the pci caller passes 0 as the fctype,
which means any fabrics command would be displayed as "Property Set".
Move fabrics command support into a function nvme_fabrics_opcode_str()
and remove the fctype argument to nvme_opcode_str().
This way, a fabrics command will display as "Unknown" for pci.
Convert the rdma and tcp transports to use nvme_fabrics_opcode_str().
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
In nvme_get_error_status_str(), the status code is already masked
with 0x7ff at the beginning of the function.
Don't bother masking it again when indexing nvme_statuses.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The functions in drivers/nvme/host/constants.c returning human-readable
status and opcode strings currently use type "const unsigned char *".
Typically string constants use type "const char *",
so remove "unsigned" from the return types.
This is a purely cosmetic change to clarify that the functions
return text strings instead of an array of bytes, for example.
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add MODULE_DESCRIPTION() in order to remove warnings & get clean build:-
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/common/nvme-auth.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/common/nvme-keyring.o
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Authentication commands might trigger a lengthy computation on the
controller or even a callout to an external entity.
In these cases the controller might return a status without the DNR
bit set, indicating that the command should be retried.
This patch enables retries for authentication commands by setting
NVME_SUBMIT_RETRY for __nvme_submit_sync_cmd().
Reported-by: Martin George <marting@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Combine the two arguments 'flags' and 'at_head' from __nvme_submit_sync_cmd()
into a single 'flags' argument and use function-specific values to indicate
what should be set within the function.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
No point in having macros just for a single function nvme_auth_submit().
Open-code them into the caller.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The ctrl->state value is updated in another thread using WRITE_ONCE, so
ensure all the readers use the appropriate accessor.
Reviewed-by: Sagi Grimberg <sagi@grmberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The nvmet_tcp_queue_ida should be destroy when the nvmet-tcp module
exit.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
When the block layer doesn't generate/verify metadata, the SG length is
smaller than the transfer length. This is because the SG length doesn't
include the metadata length that is added by the HW on the wire. The
target failes those commands with "Data SGL Length Invalid" by comparing
the transfer length and the SG length. Fix it by adding the metadata
length to the transfer length when there is no metadata SGL. The bug
reproduces when setting read_verify/write_generate configs to 0 at the
child multipath device or at the primary device when NVMe multipath is
disabled.
Note that setting those configs to 0 on the multipath device (ns_head)
doesn't have any impact on the I/Os.
Fixes: 5ec5d3bddc6b ("nvme-rdma: add metadata/T10-PI support")
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add MODULE_DESCRIPTION() in order to remove warnings & get clean build:-
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/target/nvmet.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/target/nvme-loop.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/target/nvmet-rdma.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/target/nvmet-fc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/target/nvme-fcloop.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/target/nvmet-tcp.o
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Add MODULE_DESCRIPTION() in order to remove warnings & get clean build:-
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/host/nvme-core.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/host/nvme.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/host/nvme-fabrics.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/host/nvme-rdma.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/host/nvme-fc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvme/host/nvme-tcp.o
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The host and target use two definition of aer type, unify
them into a single one.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
