summaryrefslogtreecommitdiff
path: root/drivers/pci/probe.c
AgeCommit message (Collapse)AuthorFilesLines
2023-12-16PCI: Log bridge info when first enumerating bridgeBjorn Helgaas1-4/+19
Log bridge secondary/subordinate bus and window information at the same time we log the bridge BARs, just after discovering the bridge and before scanning the bridge's secondary bus. This logs the bridge and downstream devices in a more logical order: - pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 - pci 0000:01:00.0: [10de:13b6] type 00 class 0x030200 - pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xecffffff] - pci 0000:00:01.0: PCI bridge to [bus 01] - pci 0000:00:01.0: bridge window [io 0xe000-0xefff] + pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 + pci 0000:00:01.0: PCI bridge to [bus 01] + pci 0000:00:01.0: bridge window [io 0xe000-0xefff] + pci 0000:01:00.0: [10de:13b6] type 00 class 0x030200 + pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xecffffff] Note that we read the windows into a temporary struct resource that is thrown away, not into the resources in the struct pci_bus. The windows may be adjusted after we know what downstream devices require, and those adjustments are logged as they are made. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-16PCI: Log bridge windows conditionallyBjorn Helgaas1-9/+15
Previously pci_read_bridge_io(), pci_read_bridge_mmio(), and pci_read_bridge_mmio_pref() unconditionally logged the bridge window resource. A future change will call these functions earlier and more often. Add a "log" parameter so callers can control whether to generate the log message. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-16PCI: Supply bridge device, not secondary bus, to read window detailsBjorn Helgaas1-15/+6
Previously we logged information about devices *below* the bridge before logging information about the bridge itself, e.g., pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 pci 0000:01:00.0: [10de:13b6] type 00 class 0x030200 pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xecffffff] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] This is partly because the bridge windows are read in this path: pci_scan_child_bus_extend for (devfn = 0; devfn < 256; devfn += 8) pci_scan_slot(bus, devfn) # scan below bridge pcibios_fixup_bus(bus) pci_read_bridge_bases(bus) # read bridge windows pci_read_bridge_io(bus) Remove the assumption that the secondary (child) pci_bus already exists by passing in the bridge device (instead of the pci_bus) and a resource pointer when reading bridge windows. A future change can use this to log the bridge details before we enumerate the devices below the bridge. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-16PCI: Move pci_read_bridge_windows() below individual window accessorsBjorn Helgaas1-51/+51
Move pci_read_bridge_windows() below the functions that read the I/O, memory, and prefetchable memory windows, so pci_read_bridge_windows() can use them in the future. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-16PCI: Use resource names in PCI log messagesPuranjay Mohan1-13/+13
Use the pci_resource_name() to get the name of the resource and use it while printing log messages. [bhelgaas: rename to match struct resource * names, also use names in other BAR messages] Link: https://lore.kernel.org/r/20211106112606.192563-3-puranjay12@gmail.com Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-12-16PCI: Log device type during enumerationBjorn Helgaas1-2/+40
Log the device type when enumeration a device. Sample output changes: - pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 + pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 conventional PCI endpoint - pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 + pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400 PCIe Root Port Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-10-28Merge branch 'pci/field-get'Bjorn Helgaas1-4/+4
- Use FIELD_GET()/FIELD_PREP() when possible throughout drivers/pci/ (Ilpo Järvinen, Bjorn Helgaas) - Rework DPC control programming for clarity (Ilpo Järvinen) * pci/field-get: PCI/portdrv: Use FIELD_GET() PCI/VC: Use FIELD_GET() PCI/PTM: Use FIELD_GET() PCI/PME: Use FIELD_GET() PCI/ATS: Use FIELD_GET() PCI/ATS: Show PASID Capability register width in bitmasks PCI: Use FIELD_GET() in Sapphire RX 5600 XT Pulse quirk PCI: Use FIELD_GET() PCI/MSI: Use FIELD_GET/PREP() PCI/DPC: Use defines with DPC reason fields PCI/DPC: Use defined fields with DPC_CTL register PCI/DPC: Use FIELD_GET() PCI: hotplug: Use FIELD_GET/PREP() PCI: dwc: Use FIELD_GET/PREP() PCI: cadence: Use FIELD_GET() PCI: Use FIELD_GET() to extract Link Width PCI: mvebu: Use FIELD_PREP() with Link Width PCI: tegra194: Use FIELD_GET()/FIELD_PREP() with Link Width fields # Conflicts: # drivers/pci/controller/dwc/pcie-tegra194.c
2023-10-24PCI: Use FIELD_GET()Bjorn Helgaas1-4/+4
Use FIELD_GET() and FIELD_PREP() to remove dependences on the field position, i.e., the shift value. No functional change intended. Link: https://lore.kernel.org/r/20231010204436.1000644-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-10-11PCI: Do error check on own line to split long "if" conditionsIlpo Järvinen1-3/+3
Placing PCI error code check inside "if" condition usually results in need to split lines. Combined with additional conditions the "if" condition becomes messy. Convert to the usual error handling pattern with an additional variable to improve code readability. In addition, reverse the logic in pci_find_vsec_capability() to get rid of &&. No functional changes intended. Link: https://lore.kernel.org/r/20230911125354.25501-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> [bhelgaas: PCI_POSSIBLE_ERROR()] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-09-06PCI: Free released resource after coalescingRoss Lagerwall1-0/+1
release_resource() doesn't actually free the resource or resource list entry so free the resource list entry to avoid a leak. Closes: https://lore.kernel.org/r/878r9sga1t.fsf@kernel.org/ Fixes: e54223275ba1 ("PCI: Release resource invalidated by coalescing") Link: https://lore.kernel.org/r/20230906110846.225369-1-ross.lagerwall@citrix.com Reported-by: Kalle Valo <kvalo@kernel.org> Tested-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.16+
2023-08-29Merge branch 'pci/misc'Bjorn Helgaas1-2/+1
- Reorder struct pci_dev to avoid holes and reduce size (Christophe JAILLET) - Change pdev->rom_attr_enabled to single bit since it's only a boolean value (Christophe JAILLET) - Use struct_size() in pirq_convert_irt_table() instead of hand-writing it (Christophe JAILLET) - Explicitly include correct DT includes to untangle headers (Rob Herring) - Fix a DOE race between destroy_work_on_stack() and the stack-allocated task->work struct going out of scope in pci_doe() (Ira Weiny) - Use pci_dev_id() when possible instead of manually composing ID from dev->bus->number and dev->devfn (Xiongfeng Wang, Zheng Zengkai) - Move pci_create_resource_files() declarations to linux/pci.h for alpha build warnings (Arnd Bergmann) - Remove unused hotplug function declarations (Yue Haibing) - Remove unused mvebu struct mvebu_pcie.busn (Pali Rohár) - Unexport pcie_port_bus_type (Bjorn Helgaas) - Remove unnecessary sysfs ID local variable initialization (Bjorn Helgaas) - Fix BAR value printk formatting to accommodate 32-bit values (Bjorn Helgaas) - Use consistent pointer types for config access syscall get_user() and put_user() uses (Bjorn Helgaas) - Simplify AER_RECOVER_RING_SIZE definition (Bjorn Helgaas) - Simplify pci_pio_to_address() (Bjorn Helgaas) - Simplify pci_dev_driver() (Bjorn Helgaas) - Fix pci_bus_resetable(), pci_slot_resetable() name typos (Bjorn Helgaas) - Fix code and doc typos and code formatting (Bjorn Helgaas) - Tidy config space save/restore messages (Bjorn Helgaas) * pci/misc: PCI: Tidy config space save/restore messages PCI: Fix code formatting inconsistencies PCI: Fix typos in docs and comments PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos PCI: Simplify pci_dev_driver() PCI: Simplify pci_pio_to_address() PCI/AER: Simplify AER_RECOVER_RING_SIZE definition PCI: Use consistent put_user() pointer types PCI: Fix printk field formatting PCI: Remove unnecessary initializations PCI: Unexport pcie_port_bus_type PCI: mvebu: Remove unused busn member PCI: Remove unused function declarations PCI/sysfs: Move declarations to linux/pci.h PCI/P2PDMA: Use pci_dev_id() to simplify the code PCI/IOV: Use pci_dev_id() to simplify the code PCI/AER: Use pci_dev_id() to simplify the code PCI: apple: Use pci_dev_id() to simplify the code PCI/DOE: Fix destroy_work_on_stack() race PCI: Explicitly include correct DT includes x86/PCI: Use struct_size() in pirq_convert_irt_table() PCI: Change pdev->rom_attr_enabled to single bit PCI: Reorder pci_dev fields to reduce holes
2023-08-25PCI: Fix typos in docs and commentsBjorn Helgaas1-1/+1
Fix typos in docs and comments. Link: https://lore.kernel.org/r/20230824193712.542167-11-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-08-10PCI: Add locking to RMW PCI Express Capability Register accessorsIlpo Järvinen1-0/+1
Many places in the kernel write the Link Control and Root Control PCI Express Capability Registers without proper concurrency control and this could result in losing the changes one of the writers intended to make. Add pcie_cap_lock spinlock into the struct pci_dev and use it to protect bit changes made in the RMW capability accessors. Protect only a selected set of registers by differentiating the RMW accessor internally to locked/unlocked variants using a wrapper which has the same signature as pcie_capability_clear_and_set_word(). As the Capability Register (pos) given to the wrapper is always a constant, the compiler should be able to simplify all the dead-code away. So far only the Link Control Register (ASPM, hotplug, link retraining, various drivers) and the Root Control Register (AER & PME) seem to require RMW locking. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: c7f486567c1d ("PCI PM: PCIe PME root port service driver") Fixes: f12eb72a268b ("PCI/ASPM: Use PCI Express Capability accessors") Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Fixes: affa48de8417 ("staging/rdma/hfi1: Add support for enabling/disabling PCIe ASPM") Fixes: 849a9366cba9 ("misc: rtsx: Add support new chip rts5228 mmc: rtsx: Add support MMC_CAP2_NO_MMC") Fixes: 3d1e7aa80d1c ("misc: rtsx: Use pcie_capability_clear_and_set_word() for PCI_EXP_LNKCTL") Fixes: c0e5f4e73a71 ("misc: rtsx: Add support for RTS5261") Fixes: 3df4fce739e2 ("misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG") Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function") Fixes: 19f3bd548f27 ("mfd: rtsx: Remove LCTLR defination") Fixes: 773ccdfd9cc6 ("mfd: rtsx: Read vendor setting from config space") Fixes: 8275b77a1513 ("mfd: rts5249: Add support for RTS5250S power saving") Fixes: 5da4e04ae480 ("misc: rtsx: Add support for RTS5260") Fixes: 0f49bfbd0f2e ("tg3: Use PCI Express Capability accessors") Fixes: 5e7dfd0fb94a ("tg3: Prevent corruption at 10 / 100Mbps w CLKREQ") Fixes: b726e493e8dc ("r8169: sync existing 8168 device hardware start sequences with vendor driver") Fixes: e6de30d63eb1 ("r8169: more 8168dp support.") Fixes: 8a06127602de ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards") Fixes: 6f461f6c7c96 ("e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata") Fixes: 1eae4eb2a1c7 ("e1000e: Disable L1 ASPM power savings for 82573 mobile variants") Fixes: 8060e169e02f ("ath9k: Enable extended synch for AR9485 to fix L0s recovery issue") Fixes: 69ce674bfa69 ("ath9k: do btcoex ASPM disabling at initialization time") Fixes: f37f05503575 ("mt76: mt76x2e: disable pcie_aspm by default") Link: https://lore.kernel.org/r/20230717120503.15276-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org>
2023-07-18PCI: Explicitly include correct DT includesRob Herring1-1/+0
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Link: https://lore.kernel.org/r/20230714174827.4061572-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-06-26Merge branch 'pci/resource'Bjorn Helgaas1-1/+3
- When we coalesce host bridge windows, remove invalidated resources from the resource tree so future allocations work correctly (Ross Lagerwall) * pci/resource: PCI: Release resource invalidated by coalescing
2023-06-20PCI: Work around PCIe link training failuresMaciej W. Rozycki1-0/+2
Attempt to handle cases such as with a downstream port of the ASMedia ASM2824 PCIe switch where link training never completes and the link continues switching between speeds indefinitely with the data link layer never reaching the active state. It has been observed with a downstream port of the ASMedia ASM2824 Gen 3 switch wired to the upstream port of the Pericom PI7C9X2G304 Gen 2 switch, using a Delock Riser Card PCI Express x1 > 2 x PCIe x1 device, P/N 41433, wired to a SiFive HiFive Unmatched board. In this setup the switches should negotiate a link speed of 5.0GT/s, falling back to 2.5GT/s if necessary. Instead the link continues oscillating between the two speeds, at the rate of 34-35 times per second, with link training reported repeatedly active ~84% of the time. Limiting the target link speed to 2.5GT/s with the upstream ASM2824 device makes the two switches communicate correctly. Removing the speed restriction afterwards makes the two devices switch to 5.0GT/s then. Make use of these observations and detect the inability to train the link by checking for the Data Link Layer Link Active status bit being off while the Link Bandwidth Management Status indicating that hardware has changed the link speed or width in an attempt to correct unreliable link operation. Restrict the speed to 2.5GT/s then with the Target Link Speed field, request a retrain and wait 200ms for the data link to go up. If this is successful, lift the restriction, letting the devices negotiate a higher speed. Also check for a 2.5GT/s speed restriction the firmware may have already arranged and lift it too with ports of devices known to continue working afterwards (currently only ASM2824), that already report their data link being up. [bhelgaas: reorder and squash stubs from https://lore.kernel.org/r/alpine.DEB.2.21.2306111619570.64925@angie.orcam.me.uk to avoid adding stubs that do nothing] Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203022037020.56670@angie.orcam.me.uk/ Link: https://source.denx.de/u-boot/u-boot/-/commit/a398a51ccc68 Link: https://lore.kernel.org/r/alpine.DEB.2.21.2305310038540.59226@angie.orcam.me.uk Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-06-15PCI: Initialize dev->link_active_reporting earlierMaciej W. Rozycki1-1/+5
Determine whether Data Link Layer Link Active Reporting is available before calling any fixups so that the cached value can be used there and later on. [bhelgaas: move to set_pcie_port_type() where other PCIe init is done] Link: https://lore.kernel.org/r/alpine.DEB.2.21.2305310122210.59226@angie.orcam.me.uk Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-06-09PCI: Release resource invalidated by coalescingRoss Lagerwall1-1/+3
When contiguous windows are coalesced by pci_register_host_bridge(), the second resource is expanded to include the first, and the first is invalidated and consequently not added to the bus. However, it remains in the resource hierarchy. For example, these windows: fec00000-fec7ffff : PCI Bus 0000:00 fec80000-fecbffff : PCI Bus 0000:00 are coalesced into this, where the first resource remains in the tree with start/end zeroed out: 00000000-00000000 : PCI Bus 0000:00 fec00000-fecbffff : PCI Bus 0000:00 In some cases (e.g. the Xen scratch region), this causes future calls to allocate_resource() to choose an inappropriate location which the caller cannot handle. Fix by releasing the zeroed-out resource and removing it from the resource hierarchy. [bhelgaas: commit log] Fixes: 7c3855c423b1 ("PCI: Coalesce host bridge contiguous apertures") Link: https://lore.kernel.org/r/20230525153248.712779-1-ross.lagerwall@citrix.com Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.16+
2023-04-30Merge tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds1-0/+1
Pull compute express link updates from Dan Williams: "DOE support is promoted from drivers/cxl/ to drivers/pci/ with Bjorn's blessing, and the CXL core continues to mature its media management capabilities with support for listing and injecting media errors. Some late fixes that missed v6.3-final are also included: - Refactor the DOE infrastructure (Data Object Exchange PCI-config-cycle mailbox) to be a facility of the PCI core rather than the CXL core. This is foundational for upcoming support for PCI device-attestation and PCIe / CXL link encryption. - Add support for retrieving and injecting poison for CXL memory expanders. This enabling uses trace-events to convey CXL media error records to user tooling. It includes translation of device-local addresses (DPA) to system physical addresses (SPA) and their corresponding CXL region. - Fixes for decoder enumeration that missed v6.3-final - Miscellaneous fixups" * tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (38 commits) cxl/test: Add mock test for set_timestamp cxl/mbox: Update CMD_RC_TABLE tools/testing/cxl: Require CONFIG_DEBUG_FS tools/testing/cxl: Add a sysfs attr to test poison inject limits tools/testing/cxl: Use injected poison for get poison list tools/testing/cxl: Mock the Clear Poison mailbox command tools/testing/cxl: Mock the Inject Poison mailbox command cxl/mem: Add debugfs attributes for poison inject and clear cxl/memdev: Trace inject and clear poison as cxl_poison events cxl/memdev: Warn of poison inject or clear to a mapped region cxl/memdev: Add support for the Clear Poison mailbox command cxl/memdev: Add support for the Inject Poison mailbox command tools/testing/cxl: Mock support for Get Poison List cxl/trace: Add an HPA to cxl_poison trace events cxl/region: Provide region info to the cxl_poison trace event cxl/memdev: Add trigger_poison_list sysfs attribute cxl/trace: Add TRACE support for CXL media-error records cxl/mbox: Add GET_POISON_LIST mailbox command cxl/mbox: Initialize the poison state cxl/mbox: Restrict poison cmds to debugfs cxl_raw_allow_all ...
2023-04-27Merge tag 'pci-v6.4-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull pci updates from Bjorn Helgaas: "Resource management: - Add pci_dev_for_each_resource() and pci_bus_for_each_resource() iterators PCIe native device hotplug: - Fix AB-BA deadlock between reset_lock and device_lock Power management: - Wait longer for devices to become ready after resume (as we do for reset) to accommodate Intel Titan Ridge xHCI devices - Extend D3hot delay for NVIDIA HDA controllers to avoid unrecoverable devices after a bus reset Error handling: - Clear PCIe Device Status after EDR since generic error recovery now only clears it when AER is native ASPM: - Work around Chromebook firmware defect that clobbers Capability list (including ASPM L1 PM Substates Cap) when returning from D3cold to D0 Freescale i.MX6 PCIe controller driver: - Install imprecise external abort handler only when DT indicates PCIe support Freescale Layerscape PCIe controller driver: - Add ls1028a endpoint mode support Qualcomm PCIe controller driver: - Add SM8550 DT binding and driver support - Add SDX55 DT binding and driver support - Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3 - Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0 - Add DT "mhi" register region for supported SoCs - Expose link transition counts via debugfs to help debug low power issues - Support system suspend and resume; reduce interconnect bandwidth and turn off clock and PHY if there are no active devices - Enable async probe by default to reduce boot time Miscellaneous: - Sort controller Kconfig entries by vendor" * tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits) PCI: xilinx: Drop obsolete dependency on COMPILE_TEST PCI: mobiveil: Sort Kconfig entries by vendor PCI: dwc: Sort Kconfig entries by vendor PCI: Sort controller Kconfig entries by vendor PCI: Use consistent controller Kconfig menu entry language PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt PCI: hv: Add 'Microsoft' to Kconfig prompt PCI: meson: Add 'Amlogic' to Kconfig prompt PCI: Use of_property_present() for testing DT property presence PCI/PM: Extend D3hot delay for NVIDIA HDA controllers dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties PCI: qcom: Add SM8550 PCIe support dt-bindings: PCI: qcom: Add SM8550 compatible PCI: qcom: Add support for SDX55 SoC dt-bindings: PCI: qcom-ep: Fix the unit address used in example dt-bindings: PCI: qcom: Add SDX55 SoC dt-bindings: PCI: qcom: Update maintainers entry PCI: qcom: Enable async probe by default PCI: qcom: Add support for system suspend and resume PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter ...
2023-04-20PCI: Restrict device disabled status check to DTRob Herring1-4/+4
Commit 6fffbc7ae137 ("PCI: Honor firmware's device disabled status") checked the firmware device status for both DT and ACPI devices. That caused a regression in some ACPI systems. The exact reason isn't clear. It's possibly a firmware bug. For now, at least, refactor the check to be for DT based systems only. Note that the original implementation leaked a refcount which is now correctly handled. [bhelgaas: Per ACPI r6.5, sec 6.3.7, for devices on an enumerable bus, _STA must return with bit[0] ("device is present") set] Link: https://lore.kernel.org/all/m2fs9lgndw.fsf@gmail.com/ Fixes: 6fffbc7ae137 ("PCI: Honor firmware's device disabled status") Link: https://lore.kernel.org/r/20230419193513.708818-1-robh@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217317 Reported-by: Donald Hunter <donald.hunter@gmail.com> Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Donald Hunter <donald.hunter@gmail.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Binbin Zhou <zhoubinbin@loongson.cn> Cc: Liu Peibao <liupeibao@loongson.cn> Cc: Huacai Chen <chenhuacai@loongson.cn>
2023-04-18PCI/DOE: Create mailboxes on device enumerationLukas Wunner1-0/+1
Currently a DOE instance cannot be shared by multiple drivers because each driver creates its own pci_doe_mb struct for a given DOE instance. For the same reason a DOE instance cannot be shared between the PCI core and a driver. Moreover, finding out which protocols a DOE instance supports requires creating a pci_doe_mb for it. If a device has multiple DOE instances, a driver looking for a specific protocol may need to create a pci_doe_mb for each of the device's DOE instances and then destroy those which do not support the desired protocol. That's obviously an inefficient way to do things. Overcome these issues by creating mailboxes in the PCI core on device enumeration. Provide a pci_find_doe_mailbox() API call to allow drivers to get a pci_doe_mb for a given (pci_dev, vendor, protocol) triple. This API is modeled after pci_find_capability() and can later be amended with a pci_find_next_doe_mailbox() call to iterate over all mailboxes of a given pci_dev which support a specific protocol. On removal, destroy the mailboxes in pci_destroy_dev(), after the driver is unbound. This allows drivers to use DOE in their ->remove() hook. On surprise removal, cancel ongoing DOE exchanges and prevent new ones from being scheduled. Thereby ensure that a hot-removed device doesn't needlessly wait for a running exchange to time out. Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Ming Li <ming4.li@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/40a6f973f72ef283d79dd55e7e6fddc7481199af.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-05PCI: Make pci_bus_for_each_resource() index optionalAndy Shevchenko1-1/+1
Refactor pci_bus_for_each_resource() in the same way as pci_dev_for_each_resource(). This allows the index to be hidden inside the implementation so the caller can omit it when it's not used otherwise. No functional changes intended. Link: https://lore.kernel.org/r/20230330162434.35055-6-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-02-25Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds1-0/+1
Pull Compute Express Link (CXL) updates from Dan Williams: "To date Linux has been dependent on platform-firmware to map CXL RAM regions and handle events / errors from devices. With this update we can now parse / update the CXL memory layout, and report events / errors from devices. This is a precursor for the CXL subsystem to handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that for DDR-attached-DRAM is handled by the EDAC driver where it maps system physical address events to a field-replaceable-unit (FRU / endpoint device). In general, CXL has the potential to standardize what has historically been a pile of memory-controller-specific error handling logic. Another change of note is the default policy for handling RAM-backed device-dax instances. Previously the default access mode was "device", mmap(2) a device special file to access memory. The new default is "kmem" where the address range is assigned to the core-mm via add_memory_driver_managed(). This saves typical users from wondering why their platform memory is not visible via free(1) and stuck behind a device-file. At the same time it allows expert users to deploy policy to, for example, get dedicated access to high performance memory, or hide low performance memory from general purpose kernel allocations. This affects not only CXL, but also systems with high-bandwidth-memory that platform-firmware tags with the EFI_MEMORY_SP (special purpose) designation. Summary: - CXL RAM region enumeration: instantiate 'struct cxl_region' objects for platform firmware created memory regions - CXL RAM region provisioning: complement the existing PMEM region creation support with RAM region support - "Soft Reservation" policy change: Online (memory hot-add) soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for setting aside such memory for dedicated access via device-dax. - CXL Events and Interrupts: Takeover CXL event handling from platform-firmware (ACPI calls this CXL Memory Error Reporting) and export CXL Events via Linux Trace Events. - Convey CXL _OSC results to drivers: Similar to PCI, let the CXL subsystem interrogate the result of CXL _OSC negotiation. - Emulate CXL DVSEC Range Registers as "decoders": Allow for first-generation devices that pre-date the definition of the CXL HDM Decoder Capability to translate the CXL DVSEC Range Registers into 'struct cxl_decoder' objects. - Set timestamp: Per spec, set the device timestamp in case of hotplug, or if platform-firwmare failed to set it. - General fixups: linux-next build issues, non-urgent fixes for pre-production hardware, unit test fixes, spelling and debug message improvements" * tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits) dax/kmem: Fix leak of memory-hotplug resources cxl/mem: Add kdoc param for event log driver state cxl/trace: Add serial number to trace points cxl/trace: Add host output to trace points cxl/trace: Standardize device information output cxl/pci: Remove locked check for dvsec_range_allowed() cxl/hdm: Add emulation when HDM decoders are not committed cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders cxl/hdm: Emulate HDM decoder from DVSEC range registers cxl/pci: Refactor cxl_hdm_decode_init() cxl/port: Export cxl_dvsec_rr_decode() to cxl_port cxl/pci: Break out range register decoding from cxl_hdm_decode_init() cxl: add RAS status unmasking for CXL cxl: remove unnecessary calling of pci_enable_pcie_error_reporting() dax/hmem: build hmem device support as module if possible dax: cxl: add CXL_REGION dependency cxl: avoid returning uninitialized error code cxl/pmem: Fix nvdimm registration races cxl/mem: Fix UAPI command comment cxl/uapi: Tag commands from cxl_query_cmd() ...
2023-02-22Merge branch 'pci/resource'Bjorn Helgaas1-1/+1
- Realign space as required by bridge windows after dividing it up (Mika Westerberg) - Account for space required by other devices on the bus before distributing it all to bridges (Mika Westerberg) - Distribute spare resources to root bus devices as well as to other hotplug bridges (Mika Westerberg) - Fix bug that dropped root bus resources that end at zero, e.g., a host bridge that leads only to bus 00 (Geert Uytterhoeven) * pci/resource: PCI: Fix dropping valid root bus resources with .end = zero PCI: Distribute available resources for root buses, too PCI: Take other bus devices into account when distributing resources PCI: Align extra resources for hotplug bridges properly
2023-02-14PCI: Fix dropping valid root bus resources with .end = zeroGeert Uytterhoeven1-1/+1
On r8a7791/koelsch: kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) # cat /sys/kernel/debug/kmemleak unreferenced object 0xc3a34e00 (size 64): comm "swapper/0", pid 1, jiffies 4294937460 (age 199.080s) hex dump (first 32 bytes): b4 5d 81 f0 b4 5d 81 f0 c0 b0 a2 c3 00 00 00 00 .]...].......... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<fe3aa979>] __kmalloc+0xf0/0x140 [<34bd6bc0>] resource_list_create_entry+0x18/0x38 [<767046bc>] pci_add_resource_offset+0x20/0x68 [<b3f3edf2>] devm_of_pci_get_host_bridge_resources.constprop.0+0xb0/0x390 When coalescing two resources for a contiguous aperture, the second resource is enlarged to cover the full contiguous range, while the first resource is marked invalid. This invalidation is done by clearing the flags, start, and end members. When adding the initial resources to the bus later, invalid resources are skipped. Unfortunately, the check for an invalid resource considers only the end member, causing false positives. E.g. on r8a7791/koelsch, root bus resource 0 ("bus 00") is skipped, and no longer registered with pci_bus_insert_busn_res() (causing the memory leak), nor printed: pci-rcar-gen2 ee090000.pci: host bridge /soc/pci@ee090000 ranges: pci-rcar-gen2 ee090000.pci: MEM 0x00ee080000..0x00ee08ffff -> 0x00ee080000 pci-rcar-gen2 ee090000.pci: PCI: revision 11 pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00 -pci_bus 0000:00: root bus resource [bus 00] pci_bus 0000:00: root bus resource [mem 0xee080000-0xee08ffff] Fix this by only skipping resources where all of the flags, start, and end members are zero. Fixes: 7c3855c423b17f6c ("PCI: Coalesce host bridge contiguous apertures") Link: https://lore.kernel.org/r/da0fcd5e86c74239be79c7cb03651c0fce31b515.1676036673.git.geert+renesas@glider.be Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
2023-02-14PCI: Honor firmware's device disabled statusRob Herring1-0/+2
If a device has a firmware node (DT/ACPI), and the device is marked disabled, that is currently ignored. Add a check for this condition and bail out creating the pci_dev. This assumes the config space for the device can still be accessed because they already have by this point in order to identify the device. Link: https://lore.kernel.org/r/20230210164351.2687475-1-robh@kernel.org Tested-by: Binbin Zhou <zhoubinbin@loongson.cn> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Liu Peibao <liupeibao@loongson.cn> Cc: Huacai Chen <chenhuacai@loongson.cn>
2023-01-06PCI/CXL: Export native CXL error reporting controlIra Weiny1-0/+1
CXL _OSC Error Reporting Control is used by the OS to determine if Firmware has control of various CXL error reporting capabilities including the event logs. Expose the result of negotiating CXL Error Reporting Control in struct pci_host_bridge for consumption by the CXL drivers. Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: linux-pci@vger.kernel.org Cc: linux-acpi@vger.kernel.org Signed-off-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/20221212070627.1372402-2-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-12-14Merge tag 'pci-v6.2-changes' of ↵Linus Torvalds1-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Squash portdrv_{core,pci}.c into portdrv.c to ease maintenance and make more things static. - Make portdrv bind to Switch Ports that have AER. Previously, if these Ports lacked MSI/MSI-X, portdrv failed to bind, which meant the Ports couldn't be suspended to low-power states. AER on these Ports doesn't use interrupts, and the AER driver doesn't need to claim them. - Assign PCI domain IDs using ida_alloc(), which makes host bridge add/remove work better. Resource management: - To work better with recent BIOSes that use EfiMemoryMappedIO for PCI host bridge apertures, remove those regions from the E820 map (E820 entries normally prevent us from allocating BARs). In v5.19, we added some quirks to disable E820 checking, but that's not very maintainable. EfiMemoryMappedIO means the OS needs to map the region for use by EFI runtime services; it shouldn't prevent OS from using it. PCIe native device hotplug: - Build pciehp by default if USB4 is enabled, since Thunderbolt/USB4 PCIe tunneling depends on native PCIe hotplug. - Enable Command Completed Interrupt only if supported to avoid user confusion from lspci output that says this is enabled but not supported. - Prevent pciehp from binding to Switch Upstream Ports; this happened because of interaction with acpiphp and caused devices below the Upstream Port to disappear. Power management: - Convert AGP drivers to generic power management. We hope to remove legacy power management from the PCI core eventually. Virtualization: - Fix pci_device_is_present(), which previously always returned "false" for VFs, causing virtio hangs when unbinding the driver. Miscellaneous: - Convert drivers to gpiod API to prepare for dropping some legacy code. - Fix DOE fencepost error for the maximum data object length. Baikal-T1 PCIe controller driver: - Add driver and DT bindings. Broadcom STB PCIe controller driver: - Enable Multi-MSI. - Delay 100ms after PERST# deassert to allow power and clocks to stabilize. - Configure Read Completion Boundary to 64 bytes. Freescale i.MX6 PCIe controller driver: - Initialize PHY before deasserting core reset to fix a regression in v6.0 on boards where the PHY provides the reference. - Fix imx6sx and imx8mq clock names in DT schema. Intel VMD host bridge driver: - Fix Secondary Bus Reset on VMD bridges, which allows reset of NVMe SSDs in VT-d pass-through scenarios. - Disable MSI remapping, which gets re-enabled by firmware during suspend/resume. MediaTek PCIe Gen3 controller driver: - Add MT7986 and MT8195 support. Qualcomm PCIe controller driver: - Add SC8280XP/SA8540P basic interconnect support. Rockchip DesignWare PCIe controller driver: - Base DT schema on common Synopsys schema. Synopsys DesignWare PCIe core: - Collect DT items shared between Root Port and Endpoint (PERST GPIO, PHY info, clocks, resets, link speed, number of lanes, number of iATU windows, interrupt info, etc) to snps,dw-pcie-common.yaml. - Add dma-ranges support for Root Ports and Endpoints. - Consolidate DT resource retrieval for "dbi", "dbi2", "atu", etc. to reduce code duplication. - Add generic names for clocks and resets to encourage more consistent naming across drivers using DesignWare IP. - Stop advertising PTM Responder role for Endpoints, which aren't allowed to be responders. TI J721E PCIe driver: - Add j721s2 host mode ID to DT schema. - Add interrupt properties to DT schema. Toshiba Visconti PCIe controller driver: - Fix interrupts array max constraints in DT schema" * tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (95 commits) x86/PCI: Use pr_info() when possible x86/PCI: Fix log message typo x86/PCI: Tidy E820 removal messages PCI: Skip allocate_resource() if too little space available efi/x86: Remove EfiMemoryMappedIO from E820 map PCI/portdrv: Allow AER service only for Root Ports & RCECs PCI: xilinx-nwl: Fix coding style violations PCI: mvebu: Switch to using gpiod API PCI: pciehp: Enable Command Completed Interrupt only if supported PCI: aardvark: Switch to using devm_gpiod_get_optional() dt-bindings: PCI: mediatek-gen3: add support for mt7986 dt-bindings: PCI: mediatek-gen3: add SoC based clock config dt-bindings: PCI: qcom: Allow 'dma-coherent' property PCI: mt7621: Add sentinel to quirks table PCI: vmd: Fix secondary bus reset for Intel bridges PCI: endpoint: pci-epf-vntb: Fix sparse ntb->reg build warning PCI: endpoint: pci-epf-vntb: Fix sparse build warning for epf_db PCI: endpoint: pci-epf-vntb: Replace hardcoded 4 with sizeof(u32) PCI: endpoint: pci-epf-vntb: Remove unused epf_db_phy struct member PCI: endpoint: pci-epf-vntb: Fix call pci_epc_mem_free_addr() in error path ...
2022-12-13Merge tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds1-0/+6
Pull cxl updates from Dan Williams: "Compute Express Link (CXL) updates for 6.2. While it may seem backwards, the CXL update this time around includes some focus on CXL 1.x enabling where the work to date had been with CXL 2.0 (VH topologies) in mind. First generation CXL can mostly be supported via BIOS, similar to DDR, however it became clear there are use cases for OS native CXL error handling and some CXL 3.0 endpoint features can be deployed on CXL 1.x hosts (Restricted CXL Host (RCH) topologies). So, this update brings RCH topologies into the Linux CXL device model. In support of the ongoing CXL 2.0+ enabling two new core kernel facilities are added. One is the ability for the kernel to flag collisions between userspace access to PCI configuration registers and kernel accesses. This is brought on by the PCIe Data-Object-Exchange (DOE) facility, a hardware mailbox over config-cycles. The other is a cpu_cache_invalidate_memregion() API that maps to wbinvd_on_all_cpus() on x86. To prevent abuse it is disabled in guest VMs and architectures that do not support it yet. The CXL paths that need it, dynamic memory region creation and security commands (erase / unlock), are disabled when it is not present. As for the CXL 2.0+ this cycle the subsystem gains support Persistent Memory Security commands, error handling in response to PCIe AER notifications, and support for the "XOR" host bridge interleave algorithm. Summary: - Add the cpu_cache_invalidate_memregion() API for cache flushing in response to physical memory reconfiguration, or memory-side data invalidation from operations like secure erase or memory-device unlock. - Add a facility for the kernel to warn about collisions between kernel and userspace access to PCI configuration registers - Add support for Restricted CXL Host (RCH) topologies (formerly CXL 1.1) - Add handling and reporting of CXL errors reported via the PCIe AER mechanism - Add support for CXL Persistent Memory Security commands - Add support for the "XOR" algorithm for CXL host bridge interleave - Rework / simplify CXL to NVDIMM interactions - Miscellaneous cleanups and fixes" * tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (71 commits) cxl/region: Fix memdev reuse check cxl/pci: Remove endian confusion cxl/pci: Add some type-safety to the AER trace points cxl/security: Drop security command ioctl uapi cxl/mbox: Add variable output size validation for internal commands cxl/mbox: Enable cxl_mbox_send_cmd() users to validate output size cxl/security: Fix Get Security State output payload endian handling cxl: update names for interleave ways conversion macros cxl: update names for interleave granularity conversion macros cxl/acpi: Warn about an invalid CHBCR in an existing CHBS entry tools/testing/cxl: Require cache invalidation bypass cxl/acpi: Fail decoder add if CXIMS for HBIG is missing cxl/region: Fix spelling mistake "memergion" -> "memregion" cxl/regs: Fix sparse warning cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support tools/testing/cxl: Add an RCH topology cxl/port: Add RCD endpoint port enumeration cxl/mem: Move devm_cxl_add_endpoint() from cxl_core to cxl_mem tools/testing/cxl: Add XOR Math support to cxl_test cxl/acpi: Support CXL XOR Interleave Math (CXIMS) ...
2022-11-17PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAINThomas Gleixner1-2/+0
What a zoo: PCI_MSI select GENERIC_MSI_IRQ PCI_MSI_IRQ_DOMAIN def_bool y depends on PCI_MSI select GENERIC_MSI_IRQ_DOMAIN Ergo PCI_MSI enables PCI_MSI_IRQ_DOMAIN which in turn selects GENERIC_MSI_IRQ_DOMAIN. So all the dependencies on PCI_MSI_IRQ_DOMAIN are just an indirection to PCI_MSI. Match the reality and just admit that PCI_MSI requires GENERIC_MSI_IRQ_DOMAIN. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20221111122014.467556921@linutronix.de
2022-11-14PCI: Allow drivers to request exclusive config regionsIra Weiny1-0/+6
PCI config space access from user space has traditionally been unrestricted with writes being an understood risk for device operation. Unfortunately, device breakage or odd behavior from config writes lacks indicators that can leave driver writers confused when evaluating failures. This is especially true with the new PCIe Data Object Exchange (DOE) mailbox protocol where backdoor shenanigans from user space through things such as vendor defined protocols may affect device operation without complete breakage. A prior proposal restricted read and writes completely.[1] Greg and Bjorn pointed out that proposal is flawed for a couple of reasons. First, lspci should always be allowed and should not interfere with any device operation. Second, setpci is a valuable tool that is sometimes necessary and it should not be completely restricted.[2] Finally methods exist for full lock of device access if required. Even though access should not be restricted it would be nice for driver writers to be able to flag critical parts of the config space such that interference from user space can be detected. Introduce pci_request_config_region_exclusive() to mark exclusive config regions. Such regions trigger a warning and kernel taint if accessed via user space. Create pci_warn_once() to restrict the user from spamming the log. [1] https://lore.kernel.org/all/161663543465.1867664.5674061943008380442.stgit@dwillia2-desk3.amr.corp.intel.com/ [2] https://lore.kernel.org/all/YF8NGeGv9vYcMfTV@kroah.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20220926215711.2893286-2-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-11-08PCI: Assign PCI domain IDs by ida_alloc()Pali Rohár1-0/+7
Replace assignment of PCI domain IDs from atomic_inc_return() to ida_alloc(). Use two IDAs, one for static domain allocations (those which are defined in device tree) and second for dynamic allocations (all other). During removal of root bus / host bridge, also release the domain ID. The released ID can be reused again, for example when dynamically loading and unloading native PCI host bridge drivers. This change also allows to mix static device tree assignment and dynamic by kernel as all static allocations are reserved in dynamic pool. [bhelgaas: set "err" if "bus->domain_nr < 0"] Link: https://lore.kernel.org/r/20220714184130.5436-1-pali@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-11-08Revert "PCI: Clear PCI_STATUS when setting up device"Bjorn Helgaas1-3/+0
This reverts commit 6cd514e58f12b211d638dbf6f791fa18d854f09c. Christophe Fergeau reported that 6cd514e58f12 ("PCI: Clear PCI_STATUS when setting up device") causes boot failures when trying to start linux guests with Apple's virtualization framework (for example using https://developer.apple.com/documentation/virtualization/running_linux_in_a_virtual_machine?language=objc) 6cd514e58f12 only solved a cosmetic problem, so revert it to fix the boot failures. Link: https://bugzilla.redhat.com/show_bug.cgi?id=2137803 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-09-21PCI: Fix typo in pci_scan_child_bus_extend()Mika Westerberg1-1/+1
Should be 'if' not 'of'. Fix this. Link: https://lore.kernel.org/r/20220905080232.36087-7-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-21PCI: Fix whitespace and indentationMika Westerberg1-2/+0
Drop two empty lines from pci_scan_child_bus_extend() and correct indentation in pci_bridge_distribute_available_resources() to better follow the kernel coding style. No functional impact. Link: https://lore.kernel.org/r/20220905080232.36087-6-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-21PCI: Pass available buses even if the bridge is already configuredMika Westerberg1-2/+3
If some part of the PCI topology is already configured (by the boot firmware) but not all, and it includes hotplug bridges, we may need to extend the bus resources of those bridges to accommodate any future hotplugs, in the same way we already do with the normal hotplug case. Pass the available buses to pci_scan_child_bus_extend() even when the bridge in question is already configured so the bus allocation code can use these available buses to extend the possible hotplug bridges below. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216000 Link: https://lore.kernel.org/r/20220905080232.36087-3-mika.westerberg@linux.intel.com Reported-by: Chris Chiu <chris.chiu@canonical.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-21PCI: Fix used_buses calculation in pci_scan_child_bus_extend()Mika Westerberg1-2/+2
pci_scan_bridge_extend() returns the subordinate bus number needed to cover all the buses below a bridge. pci_scan_child_bus_extend() computes the number of buses to reserve by comparing that with the current max bus number. Previously it did the subtraction in the wrong order, so 'used_buses' was nonsense. Subtract 'max' from 'cmax' as is done for the similar pci_scan_bridge_extend() call in the following block. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216000 Fixes: 3374c545c27c ("PCI: Account for all bridges on bus when distributing bus numbers") Link: https://lore.kernel.org/r/20220905080232.36087-2-mika.westerberg@linux.intel.com Reported-by: Chris Chiu <chris.chiu@canonical.com> Tested-by: Chris Chiu <chris.chiu@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-08-10Merge tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds1-1/+1
Pull cxl updates from Dan Williams: "Compute Express Link (CXL) updates for 6.0: - Introduce a 'struct cxl_region' object with support for provisioning and assembling persistent memory regions. - Introduce alloc_free_mem_region() to accompany the existing request_free_mem_region() as a method to allocate physical memory capacity out of an existing resource. - Export insert_resource_expand_to_fit() for the CXL subsystem to late-publish CXL platform windows in iomem_resource. - Add a polled mode PCI DOE (Data Object Exchange) driver service and use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute Table)" * tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (74 commits) cxl/hdm: Fix skip allocations vs multiple pmem allocations cxl/region: Disallow region granularity != window granularity cxl/region: Fix x1 interleave to greater than x1 interleave routing cxl/region: Move HPA setup to cxl_region_attach() cxl/region: Fix decoder interleave programming Documentation: cxl: remove dangling kernel-doc reference cxl/region: describe targets and nr_targets members of cxl_region_params cxl/regions: add padding for cxl_rr_ep_add nested lists cxl/region: Fix IS_ERR() vs NULL check cxl/region: Fix region reference target accounting cxl/region: Fix region commit uninitialized variable warning cxl/region: Fix port setup uninitialized variable warnings cxl/region: Stop initializing interleave granularity cxl/hdm: Fix DPA reservation vs cxl_endpoint_decoder lifetime cxl/acpi: Minimize granularity for x1 interleaves cxl/region: Delete 'region' attribute from root decoders cxl/acpi: Autoload driver for 'cxl_acpi' test devices cxl/region: decrement ->nr_targets on error in cxl_region_attach() cxl/region: prevent underflow in ways_to_cxl() cxl/region: uninitialized variable in alloc_hpa() ...
2022-08-04Merge branch 'pci/err'Bjorn Helgaas1-0/+3
- Recognize disconnected devices so we don't bother trying to set them to "frozen" or "normal" state (Christoph Hellwig) - Clear PCI Status register during enumeration in case firmware left errors logged (Kai-Heng Feng) - Configure ECRC for every device, including hot-added ones (Stefan Roese) - Keep AER error reporting enabled for switches (Stefan Roese) - Enable error reporting for all devices that support AER (Stefan Roese) - Iterate over error counters instead of error strings to avoid printing junk in AER sysfs counters (Mohamed Khalfella) * pci/err: PCI/AER: Iterate over error counters instead of error strings PCI/AER: Enable error reporting when AER is native PCI/portdrv: Don't disable AER reporting in get_port_device_capability() PCI/AER: Configure ECRC for every device PCI: Clear PCI_STATUS when setting up device PCI/ERR: Recognize disconnected devices in report_error_detected()
2022-07-23PCI: Extend isolated function probing to s390Niklas Schnelle1-1/+1
Like the jailhouse hypervisor, s390's PCI architecture allows passing isolated PCI functions to a guest OS instance. As of now this is was not utilized even with multi-function support as the s390 PCI code makes sure that only virtual PCI busses including a function with devfn 0 are presented to the PCI subsystem. A subsequent change will remove this restriction. Allow probing such functions by replacing the existing check for jailhouse_paravirt() with a new hypervisor_isolated_pci_functions() helper. Link: https://lore.kernel.org/r/20220628143100.3228092-5-schnelle@linux.ibm.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Cc: Jan Kiszka <jan.kiszka@siemens.com>
2022-07-23PCI: Move jailhouse's isolated function handling to pci_scan_slot()Niklas Schnelle1-20/+10
The special case of the jailhouse hypervisor passing through individual PCI functions handles scanning for PCI functions even if function 0 does not exist. Previously this was done with an extra loop duplicating the one in pci_scan_slot(). By incorporating the check for jailhouse_paravirt() into pci_scan_slot() we can instead do this as part of the normal slot scan. Note that with the assignment of dev->multifunction gated by fn > 0 we set dev->multifunction unconditionally for all functions if function 0 is missing just as in the existing jailhouse loop. The only functional change is that we now call pcie_aspm_init_link_state() for these functions, but this already happened if function 0 was passed through and should not be a problem. Link: https://lore.kernel.org/linux-pci/20220408224514.GA353445@bhelgaas/ Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20220628143100.3228092-4-schnelle@linux.ibm.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Cc: Jan Kiszka <jan.kiszka@siemens.com>
2022-07-23PCI: Split out next_ari_fn() from next_fn()Niklas Schnelle1-13/+18
In commit b1bd58e448f2 ("PCI: Consolidate "next-function" functions") the next_fn() function subsumed the traditional and ARI-based next function determination. This got rid of some needlessly complex function pointer handling but also reduced the separation between these very different methods of finding the next function. With the next_fn() cleaned up a bit we can re-introduce this separation by moving out the ARI handling while sticking with direct function calls. Link: https://lore.kernel.org/r/20220628143100.3228092-3-schnelle@linux.ibm.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
2022-07-23PCI: Clean up pci_scan_slot()Niklas Schnelle1-19/+19
While determining the next PCI function is factored out of pci_scan_slot() into next_fn(), the former still handles the first function as a special case, which duplicates the code from the scan loop. Furthermore the non-ARI branch of next_fn() is generally hard to understand and especially the check for multifunction devices is hidden in the handling of NULL devices for non-contiguous multifunction. It also signals that no further functions need to be scanned by returning 0 via wraparound and this is a valid function number. Improve upon this by transforming the conditions in next_fn() to be easier to understand. By changing next_fn() to return -ENODEV instead of 0 when there is no next function we can then handle the initial function inside the loop and deduplicate the shared handling. This also makes it more explicit that only function 0 must exist. No functional change is intended. Link: https://lore.kernel.org/r/20220628143100.3228092-2-schnelle@linux.ibm.com Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jan Kiszka <jan.kiszka@siemens.com>
2022-07-20PCI: Replace magic constant for PCI Sig Vendor IDIra Weiny1-1/+1
Replace the magic value in pci_bus_crs_vendor_id() with PCI_VENDOR_ID_PCI_SIG. Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/20220719205249.566684-3-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-07-05PCI: Clear PCI_STATUS when setting up deviceKai-Heng Feng1-0/+3
We are seeing Master Abort bit is set on Intel I350 ethernet device and its root port right after boot, probably happened during BIOS phase: 00:06.0 PCI bridge [0604]: Intel Corporation Device [8086:464d] (rev 05) (prog-if 00 [Normal decode]) Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- 6e:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01) Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- The Master Abort bit is cleared after S3. Since there's no functional impact found, clear the PCI_STATUS to treat it anew at setting up. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215989 Link: https://lore.kernel.org/r/20220517043738.2308499-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-01-16Merge tag 'pci-v5.17-changes' of ↵Linus Torvalds1-20/+12
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Use pci_find_vsec_capability() instead of open-coding it (Andy Shevchenko) - Convert pci_dev_present() stub from macro to static inline to avoid 'unused variable' errors (Hans de Goede) - Convert sysfs slot attributes from default_attrs to default_groups (Greg Kroah-Hartman) - Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum (Rajat Jain) - Remove unnecessary initialization of static variables (Longji Guo) Resource management: - Always write Intel I210 ROM BAR on update to work around device defect (Bjorn Helgaas) PCIe native device hotplug: - Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede) - Fix infinite loop in pciehp IRQ handler on power fault (Lukas Wunner) Power management: - Convert amd64-agp, sis-agp, via-agp from legacy PCI power management to generic power management (Vaibhav Gupta) IOMMU: - Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller so it can work with an IOMMU (Yifeng Li) Error handling: - Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) Peer-to-peer DMA: - Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas) ASPM: - Calculate link L0s and L1 exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Calculate device L0s and L1 acceptable exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Remove struct aspm_latency since it's no longer needed (Saheed O. Bolarinwa) APM X-Gene PCIe controller driver: - Fix IB window setup, which was broken by the fact that IB resources are now sorted in address order instead of DT dma-ranges order (Rob Herring) Apple PCIe controller driver: - Enable clock gating to save power (Hector Martin) - Fix REFCLK1 enable/poll logic (Hector Martin) Broadcom STB PCIe controller driver: - Declare bitmap correctly for use by bitmap interfaces (Christophe JAILLET) - Clean up computation of legacy and non-legacy MSI bitmasks (Florian Fainelli) - Update suspend/resume/remove error handling to warn about errors and not fail the operation (Jim Quinlan) - Correct the "pcie" and "msi" interrupt descriptions in DT binding (Jim Quinlan) - Add DT bindings for endpoint voltage regulators (Jim Quinlan) - Split brcm_pcie_setup() into two functions (Jim Quinlan) - Add mechanism for turning on voltage regulators for connected devices (Jim Quinlan) - Turn voltage regulators for connected devices on/off when bus is added or removed (Jim Quinlan) - When suspending, don't turn off voltage regulators for wakeup devices (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Add i.MX8MM support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Use DWC common ops instead of layerscape-specific link-up functions (Hou Zhiqiang) Intel VMD host bridge driver: - Honor platform ACPI _OSC feature negotiation for Root Ports below VMD (Kai-Heng Feng) - Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan) - Reset everything below VMD before enumerating to work around failure to enumerate NVMe devices when guest OS reboots (Nirmal Patel) Bridge emulation (used by Marvell Aardvark and MVEBU): - Make emulated ROM BAR read-only by default (Pali Rohár) - Make some emulated legacy PCI bits read-only for PCIe devices (Pali Rohár) - Update reserved bits in emulated PCIe Capability (Pali Rohár) - Allow drivers to emulate different PCIe Capability versions (Pali Rohár) - Set emulated Capabilities List bit for all PCIe devices, since they must have at least a PCIe Capability (Pali Rohár) Marvell Aardvark PCIe controller driver: - Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2, DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali Rohár) - Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers (Pali Rohár) - Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár) - Disable bus mastering when unbinding host controller driver (Pali Rohár) - Mask all interrupts when unbinding host controller driver (Pali Rohár) - Fix memory leak in host controller unbind (Pali Rohár) - Assert PERST# when unbinding host controller driver (Pali Rohár) - Disable link training when unbinding host controller driver (Pali Rohár) - Disable common PHY when unbinding host controller driver (Pali Rohár) - Fix resource type checking to check only IORESOURCE_MEM, not IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár) Marvell MVEBU PCIe controller driver: - Implement pci_remap_iospace() for ARM so mvebu can use devm_pci_remap_iospace() instead of the previous ARM-specific pci_ioremap_io() interface (Pali Rohár) - Use the standard pci_host_probe() instead of the device-specific mvebu_pci_host_probe() (Pali Rohár) - Replace all uses of ARM-specific pci_ioremap_io() with the ARM implementation of the standard pci_remap_iospace() interface and remove pci_ioremap_io() (Pali Rohár) - Skip initializing invalid Root Ports (Pali Rohár) - Check for errors from pci_bridge_emul_init() (Pali Rohár) - Ignore any bridges at non-zero function numbers (Pali Rohár) - Return ~0 data for invalid config read size (Pali Rohár) - Disallow mapping interrupts on emulated bridges (Pali Rohár) - Clear Root Port Memory & I/O Space Enable and Bus Master Enable at initialization (Pali Rohár) - Make type bits in Root Port I/O Base register read-only (Pali Rohár) - Disable Root Port windows when base/limit set to invalid values (Pali Rohár) - Set controller to Root Complex mode (Pali Rohár) - Set Root Port Class Code to PCI Bridge (Pali Rohár) - Update emulated Root Port secondary bus numbers to better reflect the actual topology (Pali Rohár) - Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so pci_reset_secondary_bus() can reset connected devices (Pali Rohár) - Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root Ports (Pali Rohár) - Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports (Pali Rohár) - Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on Armada XP and newer devices (Pali Rohár) - Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module (Pali Rohár) - Add support for compiling as a module (Pali Rohár) MediaTek PCIe controller driver: - Assert PERST# for 100ms to allow power and clock to stabilize (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Disable Mediatek DVFSRC voltage request since lack of DVFSRC to respond to the request causes failure to exit L1 PM Substate (Jianjun Wang) MediaTek MT7621 PCIe controller driver: - Declare mt7621_pci_ops static (Sergio Paracuellos) - Give pcibios_root_bridge_prepare() access to host bridge windows (Sergio Paracuellos) - Move MIPS I/O coherency unit setup from driver to pcibios_root_bridge_prepare() (Sergio Paracuellos) - Add missing MODULE_LICENSE() (Sergio Paracuellos) - Allow COMPILE_TEST for all arches (Sergio Paracuellos) Microsoft Hyper-V host bridge driver: - Add hv-internal interfaces to encapsulate arch IRQ dependencies (Sunil Muthuswamy) - Add arm64 Hyper-V vPCI support (Sunil Muthuswamy) Qualcomm PCIe controller driver: - Undo PM setup in qcom_pcie_probe() error handling path (Christophe JAILLET) - Use __be16 type to store return value from cpu_to_be16() (Manivannan Sadhasivam) - Constify static dw_pcie_ep_ops (Rikard Falkeborn) Renesas R-Car PCIe controller driver: - Fix aarch32 abort handler so it doesn't check the wrong bus clock before accessing the host controller (Marek Vasut) TI Keystone PCIe controller driver: - Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode DT properties (Kishon Vijay Abraham I) MicroSemi Switchtec management driver: - Add Gen4 automotive device IDs (Kelvin Cao) - Declare state_names[] as static so it's not allocated and initialized for every call (Kelvin Cao) Host controller driver cleanups: - Use of_device_get_match_data(), not of_match_device(), when we only need the device data in altera, artpec6, cadence, designware-plat, dra7xx, keystone, kirin (Fan Fei) - Drop pointless of_device_get_match_data() cast in j721e (Bjorn Helgaas) - Drop redundant struct device * from j721e since struct cdns_pcie already has one (Bjorn Helgaas) - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4, mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier, xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei) - Fix invalid address space conversions in hisi, spear13xx (Bjorn Helgaas) Miscellaneous: - Sort Intel Device IDs by value (Andy Shevchenko) - Change Capability offsets to hex to match spec (Baruch Siach) - Correct misspellings (Krzysztof Wilczyński) - Terminate statement with semicolon in pci_endpoint_test.c (Ming Wang)" * tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits) PCI: mt7621: Allow COMPILE_TEST for all arches PCI: mt7621: Add missing MODULE_LICENSE() PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare() PCI: Let pcibios_root_bridge_prepare() access bridge->windows PCI: mt7621: Declare mt7621_pci_ops static PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Split brcm_pcie_setup() into two funcs dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: Fix function return value handling PCI: brcmstb: Do not use __GENMASK PCI: brcmstb: Declare 'used' as bitmap, not unsigned long PCI: hv: Add arm64 Hyper-V vPCI support PCI: hv: Make the code arch neutral by adding arch specific interfaces PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors x86/PCI: Remove initialization of static variables to false PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum misc: pci_endpoint_test: Terminate statement with semicolon ...
2022-01-13Merge branch 'pci/errors'Bjorn Helgaas1-5/+5
- Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) * pci/errors: PCI: xgene: Use PCI_ERROR_RESPONSE to identify config read errors PCI: hv: Use PCI_ERROR_RESPONSE to identify config read errors PCI: keystone: Use PCI_ERROR_RESPONSE to identify config read errors PCI: Use PCI_ERROR_RESPONSE to identify config read errors PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads PCI/PME: Use PCI_POSSIBLE_ERROR() to check config reads PCI/DPC: Use PCI_POSSIBLE_ERROR() to check config reads PCI: pciehp: Use PCI_POSSIBLE_ERROR() to check config reads PCI: vmd: Use PCI_POSSIBLE_ERROR() to check config reads PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads PCI: rockchip-host: Drop error data fabrication when config read fails PCI: rcar-host: Drop error data fabrication when config read fails PCI: altera: Drop error data fabrication when config read fails PCI: mvebu: Drop error data fabrication when config read fails PCI: aardvark: Drop error data fabrication when config read fails PCI: kirin: Drop error data fabrication when config read fails PCI: histb: Drop error data fabrication when config read fails PCI: exynos: Drop error data fabrication when config read fails PCI: mediatek: Drop error data fabrication when config read fails PCI: iproc: Drop error data fabrication when config read fails PCI: thunder: Drop error data fabrication when config read fails PCI: Drop error data fabrication when config read fails PCI: Use PCI_SET_ERROR_RESPONSE() for disconnected devices PCI: Set error response data when config read fails PCI: Add PCI_ERROR_RESPONSE and related definitions
2022-01-13Merge branch 'pci/host/mt7621'Bjorn Helgaas1-2/+2
- Declare mt7621_pci_ops static (Sergio Paracuellos) - Give pcibios_root_bridge_prepare() access to host bridge windows (Sergio Paracuellos) - Move MIPS I/O coherency unit setup from driver to pcibios_root_bridge_prepare() (Sergio Paracuellos) - Add missing MODULE_LICENSE() (Sergio Paracuellos) - Allow COMPILE_TEST for all arches (Sergio Paracuellos) * pci/host/mt7621: PCI: mt7621: Allow COMPILE_TEST for all arches PCI: mt7621: Add missing MODULE_LICENSE() PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare() PCI: Let pcibios_root_bridge_prepare() access bridge->windows PCI: mt7621: Declare mt7621_pci_ops static
2022-01-13PCI: Let pcibios_root_bridge_prepare() access bridge->windowsSergio Paracuellos1-2/+2
When pci_register_host_bridge() is called, bridge->windows are already available. However these windows are being moved temporarily from there. To let pcibios_root_bridge_prepare() have access to these windows, move the windows movement after calling this function. This is useful for the MIPS ralink mt7621 platform so it can set up I/O coherence units and avoid custom MIPS code in the mt7621 PCIe controller driver. Link: https://lore.kernel.org/r/20211207104924.21327-2-sergio.paracuellos@gmail.com Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-08 02:56:25 +0300