summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2023-09-13Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"Bjorn Helgaas1-1/+1
commit 5260bd6d36c83c5b269c33baaaf8c78e520908b0 upstream. This reverts commit d5af729dc2071273f14cbb94abbc60608142fd83. d5af729dc207 ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided Secondary Bus Reset on the T4 because the reset seemed to not work when the T4 was directly attached to a Root Port. But NVIDIA thinks the issue is probably related to some issue with the Root Port, not with the T4. The T4 provides neither PM nor FLR reset, so masking bus reset compromises this device for assignment scenarios. Revert d5af729dc207 as requested by Wu Zongyong. This will leave SBR broken in the specific configuration Wu tested, as it was in v6.5, so Wu will debug that further. Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13PCI/PM: Only read PCI_PM_CTRL register when availableFeiyang Chen1-4/+9
commit 5694ba13b004eea683c6d4faeb6d6e7a9636bda0 upstream. For a device with no Power Management Capability, pci_power_up() previously returned 0 (success) if the platform was able to put the device in D0, which led to pci_set_full_power_state() trying to read PCI_PM_CTRL, even though it doesn't exist. Since dev->pm_cap == 0 in this case, pci_set_full_power_state() actually read the wrong register, interpreted it as PCI_PM_CTRL, and corrupted dev->current_state. This led to messages like this in some cases: pci 0000:01:00.0: Refused to change power state from D3hot to D0 To prevent this, make pci_power_up() always return a negative failure code if the device lacks a Power Management Capability, even if non-PCI platform power management has been able to put the device in D0. The failure will prevent pci_set_full_power_state() from trying to access PCI_PM_CTRL. Fixes: e200904b275c ("PCI/PM: Split pci_power_up()") Link: https://lore.kernel.org/r/20230824013738.1894965-1-chenfeiyang@loongson.cn Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org> Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernationDexuan Cui1-0/+3
commit 04bbe863241a9be7d57fb4cf217ee4a72f480e70 upstream. When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the device yet), doing a VM hibernation triggers a panic in hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because pdev->dev.msi.data is still NULL. Avoid the panic by checking if MSI-X/MSI is enabled. Link: https://lore.kernel.org/r/20230816175939.21566-1-decui@microsoft.com Fixes: dc2b453290c4 ("PCI: hv: Rework MSI handling") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: sathyanarayanan.kuppuswamy@linux.intel.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13PCI: Free released resource after coalescingRoss Lagerwall1-0/+1
commit 8ec9c1d5d0a5a4744516adb483b97a238892f9d5 upstream. release_resource() doesn't actually free the resource or resource list entry so free the resource list entry to avoid a leak. Closes: https://lore.kernel.org/r/878r9sga1t.fsf@kernel.org/ Fixes: e54223275ba1 ("PCI: Release resource invalidated by coalescing") Link: https://lore.kernel.org/r/20230906110846.225369-1-ross.lagerwall@citrix.com Reported-by: Kalle Valo <kvalo@kernel.org> Tested-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.16+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13PCI: rockchip: Use 64-bit mask on MSI 64-bit PCI addressRick Wertenbroek1-3/+3
commit cdb50033dd6dfcf02ae3d4ee56bc1a9555be6d36 upstream. A 32-bit mask was used on the 64-bit PCI address used for mapping MSIs. This would result in the upper 32 bits being unintentionally zeroed and MSIs getting mapped to incorrect PCI addresses if the address had any of the upper bits set. Replace 32-bit mask by appropriate 64-bit mask. [kwilczynski: use GENMASK_ULL() over GENMASK() for 32-bit compatibility] Fixes: dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint") Closes: https://lore.kernel.org/linux-pci/8d19e5b7-8fa0-44a4-90e2-9bb06f5eb694@moroto.mountain Link: https://lore.kernel.org/linux-pci/20230703085845.2052008-1-rick.wertenbroek@gmail.com Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-09-13PCI/ASPM: Use RMW accessors for changing LNKCTLIlpo Järvinen1-17/+13
[ Upstream commit e09060b3b6b4661278ff8e1b7b81a37d5ea86eae ] Don't assume that the device is fully under the control of ASPM and use RMW capability accessors which do proper locking to avoid losing concurrent updates to the register values. If configuration fails in pcie_aspm_configure_common_clock(), the function attempts to restore the old PCI_EXP_LNKCTL_CCC settings. Store only the old PCI_EXP_LNKCTL_CCC bit for the relevant devices rather than the content of the whole LNKCTL registers. It aligns better with how pcie_lnkctl_clear_and_set() expects its parameter and makes the code more obvious to understand. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: 2a42d9dba784 ("PCIe: ASPM: Break out of endless loop waiting for PCI config bits to switch") Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Link: https://lore.kernel.org/r/20230717120503.15276-5-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13PCI: pciehp: Use RMW accessors for changing LNKCTLIlpo Järvinen1-9/+3
[ Upstream commit 5f75f96c61039151c193775d776fde42477eace1 ] As hotplug is not the only driver touching LNKCTL, use the RMW capability accessor which handles concurrent changes correctly. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: 7f822999e12a ("PCI: pciehp: Add Disable/enable link functions") Link: https://lore.kernel.org/r/20230717120503.15276-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13PCI: Add locking to RMW PCI Express Capability Register accessorsIlpo Järvinen2-3/+18
[ Upstream commit 5e70d0acf0825f439079736080350371f8d6699a ] Many places in the kernel write the Link Control and Root Control PCI Express Capability Registers without proper concurrency control and this could result in losing the changes one of the writers intended to make. Add pcie_cap_lock spinlock into the struct pci_dev and use it to protect bit changes made in the RMW capability accessors. Protect only a selected set of registers by differentiating the RMW accessor internally to locked/unlocked variants using a wrapper which has the same signature as pcie_capability_clear_and_set_word(). As the Capability Register (pos) given to the wrapper is always a constant, the compiler should be able to simplify all the dead-code away. So far only the Link Control Register (ASPM, hotplug, link retraining, various drivers) and the Root Control Register (AER & PME) seem to require RMW locking. Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: c7f486567c1d ("PCI PM: PCIe PME root port service driver") Fixes: f12eb72a268b ("PCI/ASPM: Use PCI Express Capability accessors") Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Fixes: affa48de8417 ("staging/rdma/hfi1: Add support for enabling/disabling PCIe ASPM") Fixes: 849a9366cba9 ("misc: rtsx: Add support new chip rts5228 mmc: rtsx: Add support MMC_CAP2_NO_MMC") Fixes: 3d1e7aa80d1c ("misc: rtsx: Use pcie_capability_clear_and_set_word() for PCI_EXP_LNKCTL") Fixes: c0e5f4e73a71 ("misc: rtsx: Add support for RTS5261") Fixes: 3df4fce739e2 ("misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG") Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function") Fixes: 19f3bd548f27 ("mfd: rtsx: Remove LCTLR defination") Fixes: 773ccdfd9cc6 ("mfd: rtsx: Read vendor setting from config space") Fixes: 8275b77a1513 ("mfd: rts5249: Add support for RTS5250S power saving") Fixes: 5da4e04ae480 ("misc: rtsx: Add support for RTS5260") Fixes: 0f49bfbd0f2e ("tg3: Use PCI Express Capability accessors") Fixes: 5e7dfd0fb94a ("tg3: Prevent corruption at 10 / 100Mbps w CLKREQ") Fixes: b726e493e8dc ("r8169: sync existing 8168 device hardware start sequences with vendor driver") Fixes: e6de30d63eb1 ("r8169: more 8168dp support.") Fixes: 8a06127602de ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards") Fixes: 6f461f6c7c96 ("e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errata") Fixes: 1eae4eb2a1c7 ("e1000e: Disable L1 ASPM power savings for 82573 mobile variants") Fixes: 8060e169e02f ("ath9k: Enable extended synch for AR9485 to fix L0s recovery issue") Fixes: 69ce674bfa69 ("ath9k: do btcoex ASPM disabling at initialization time") Fixes: f37f05503575 ("mt76: mt76x2e: disable pcie_aspm by default") Link: https://lore.kernel.org/r/20230717120503.15276-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13PCI: Allow drivers to request exclusive config regionsIra Weiny2-0/+13
[ Upstream commit 278294798ac9118412c9624a801d3f20f2279363 ] PCI config space access from user space has traditionally been unrestricted with writes being an understood risk for device operation. Unfortunately, device breakage or odd behavior from config writes lacks indicators that can leave driver writers confused when evaluating failures. This is especially true with the new PCIe Data Object Exchange (DOE) mailbox protocol where backdoor shenanigans from user space through things such as vendor defined protocols may affect device operation without complete breakage. A prior proposal restricted read and writes completely.[1] Greg and Bjorn pointed out that proposal is flawed for a couple of reasons. First, lspci should always be allowed and should not interfere with any device operation. Second, setpci is a valuable tool that is sometimes necessary and it should not be completely restricted.[2] Finally methods exist for full lock of device access if required. Even though access should not be restricted it would be nice for driver writers to be able to flag critical parts of the config space such that interference from user space can be detected. Introduce pci_request_config_region_exclusive() to mark exclusive config regions. Such regions trigger a warning and kernel taint if accessed via user space. Create pci_warn_once() to restrict the user from spamming the log. [1] https://lore.kernel.org/all/161663543465.1867664.5674061943008380442.stgit@dwillia2-desk3.amr.corp.intel.com/ [2] https://lore.kernel.org/all/YF8NGeGv9vYcMfTV@kroah.com/ Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20220926215711.2893286-2-ira.weiny@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Stable-dep-of: 5e70d0acf082 ("PCI: Add locking to RMW PCI Express Capability Register accessors") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13PCI: Mark NVIDIA T4 GPUs to avoid bus resetWu Zongyong1-1/+1
[ Upstream commit d5af729dc2071273f14cbb94abbc60608142fd83 ] NVIDIA T4 GPUs do not work with SBR. This problem is found when the T4 card is direct attached to a Root Port only. Avoid bus reset by marking T4 GPUs PCI_DEV_FLAGS_NO_BUS_RESET. Fixes: 4c207e7121fa ("PCI: Mark some NVIDIA GPUs to avoid bus reset") Link: https://lore.kernel.org/r/2dcebea53a6eb9bd212ec6d8974af2e5e0333ef6.1681129861.git.wuzongyong@linux.alibaba.com Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13PCI: microchip: Correct the DED and SEC interrupt bit offsetsDaire McNamara1-4/+4
[ Upstream commit 6d473a5a26136edf55c435a1c433e52910e03926 ] The SEC and DED interrupt bits are laid out the wrong way round so the SEC interrupt handler attempts to mask, unmask, and clear the DED interrupt and vice versa. Correct the bit offsets so that each interrupt handler operates properly. Link: https://lore.kernel.org/r/20230728131401.1615724-2-daire.mcnamara@microchip.com Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver") Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13PCI/DOE: Fix destroy_work_on_stack() raceIra Weiny1-1/+1
[ Upstream commit e3a3a097eaebaf234a482b4d2f9f18fe989208c1 ] The following debug object splat was observed in testing: ODEBUG: free active (active state 0) object: 0000000097d23782 object type: work_struct hint: doe_statemachine_work+0x0/0x510 WARNING: CPU: 1 PID: 71 at lib/debugobjects.c:514 debug_print_object+0x7d/0xb0 ... Workqueue: pci 0000:36:00.0 DOE [1 doe_statemachine_work RIP: 0010:debug_print_object+0x7d/0xb0 ... Call Trace: ? debug_print_object+0x7d/0xb0 ? __pfx_doe_statemachine_work+0x10/0x10 debug_object_free.part.0+0x11b/0x150 doe_statemachine_work+0x45e/0x510 process_one_work+0x1d4/0x3c0 This occurs because destroy_work_on_stack() was called after signaling the completion in the calling thread. This creates a race between destroy_work_on_stack() and the task->work struct going out of scope in pci_doe(). Signal the work complete after destroying the work struct. This is safe because signal_task_complete() is the final thing the work item does and the workqueue code is careful not to access the work struct after. Fixes: abf04be0e707 ("PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=y") Link: https://lore.kernel.org/r/20230726-doe-fix-v1-1-af07e614d4dd@intel.com Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13PCI: qcom-ep: Switch MHI bus master clock off during L1SSManivannan Sadhasivam1-1/+1
[ Upstream commit b9cbc06049cb6b7a322d708c2098195fb9fdcc4c ] Currently, as part of the qcom_pcie_perst_deassert() function, instead of writing the updated value to clear PARF_MSTR_AXI_CLK_EN, the variable "val" is re-read. This must be fixed to ensure that the master clock supplied to the MHI bus is correctly gated during L1.1/L1.2 to save power. Thus, replace the line that re-reads "val" with a line that writes the updated value to the register to clear PARF_MSTR_AXI_CLK_EN. [kwilczynski: commit log] Fixes: c457ac029e44 ("PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS") Link: https://lore.kernel.org/linux-pci/20230627141036.11600-1-manivannan.sadhasivam@linaro.org Reported-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13PCI: apple: Initialize pcie->nvecs before useSven Peter1-1/+5
[ Upstream commit d8650c0c2aa2e413594e4cb0faafa9958c1d7782 ] The apple_pcie_setup_port() function computes ilog2(pcie->nvecs) to set up the number of MSIs available for each port. However, it's called before apple_msi_init(), which initializes pcie->nvecs. Luckily, pcie->nvecs is part of kzalloc()-ed structure and, as such, initialized as zero. ilog2(0) happens to be 0xffffffff which then simply configures more MSIs in hardware than we have. This doesn't break anything because we never hand out those vectors. Thus, swap the order of the two calls so that the correctly initialized value is then used. [kwilczynski: commit log] Link: https://lore.kernel.org/linux-pci/20230311133453.63246-1-sven@svenpeter.dev Fixes: 476c41ed4597 ("PCI: apple: Implement MSI support") Signed-off-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Reviewed-by: Eric Curtin <ecurtin@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-13Revert "PCI: tegra194: Enable support for 256 Byte payload"Vidya Sagar1-10/+0
commit ebfde1584d9f037b6309fc682c96e22dac7bcb7a upstream. After commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload"), we initialize MPS=256 for tegra194 Root Ports before enumerating the hierarchy. Consider an Endpoint that supports only MPS=128. In the default situation (CONFIG_PCIE_BUS_DEFAULT set and no "pci=pcie_bus_*" parameter), Linux tries to configure the MPS of every device to match the upstream bridge. If the Endpoint is directly below the Root Port, Linux can reduce the Root Port MPS to 128 to match the Endpoint. But if there's a switch in the middle, Linux doesn't reduce the Root Port MPS because other devices below the switch may already be configured with MPS larger than 128. This scenario results in uncorrectable Malformed TLP errors if the Root Port sends TLPs with payloads larger than 128 bytes. These errors can be avoided by using the "pci=pcie_bus_safe" parameter, but it doesn't seem to be a good idea to always have this parameter even for basic functionality to work. Revert commit 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload") so the Root Ports default to MPS=128, which all devices support. If peer-to-peer DMA is not required, one can use "pci=pcie_bus_perf" to get the benefit of larger MPS settings. [bhelgaas: commit log; kwilczynski: retain "u16 val_16" declaration at the top, add missing acked by tag] Fixes: 4fb8e46c1bc4 ("PCI: tegra194: Enable support for 256 Byte payload") Link: https://lore.kernel.org/linux-pci/20230619102604.3735001-1-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Cc: stable@vger.kernel.org # v6.0-rc1+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root busIgor Mammedov1-1/+7
commit cc22522fd55e257c86d340ae9aedc122e705a435 upstream. 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") changed acpiphp hotplug to use pci_assign_unassigned_bridge_resources() which depends on bridge being available, however enable_slot() can be called without bridge associated: 1. Legitimate case of hotplug on root bus (widely used in virt world) 2. A (misbehaving) firmware, that sends ACPI Bus Check notifications to non existing root ports (Dell Inspiron 7352/0W6WV0), which end up at enable_slot(..., bridge = 0) where bus has no bridge assigned to it. acpihp doesn't know that it's a bridge, and bus specific 'PCI subsystem' can't augment ACPI context with bridge information since the PCI device to get this data from is/was not available. Issue is easy to reproduce with QEMU's 'pc' machine, which supports PCI hotplug on hostbridge slots. To reproduce, boot kernel at commit 40613da52b13 in VM started with following CLI (assuming guest root fs is installed on sda1 partition): # qemu-system-x86_64 -M pc -m 1G -enable-kvm -cpu host \ -monitor stdio -serial file:serial.log \ -kernel arch/x86/boot/bzImage \ -append "root=/dev/sda1 console=ttyS0" \ guest_disk.img Once guest OS is fully booted at qemu prompt: (qemu) device_add e1000 (check serial.log) it will cause NULL pointer dereference at: void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge) { struct pci_bus *parent = bridge->subordinate; BUG: kernel NULL pointer dereference, address: 0000000000000018 ? pci_assign_unassigned_bridge_resources+0x1f/0x260 enable_slot+0x21f/0x3e0 acpiphp_hotplug_notify+0x13d/0x260 acpi_device_hotplug+0xbc/0x540 acpi_hotplug_work_fn+0x15/0x20 process_one_work+0x1f7/0x370 worker_thread+0x45/0x3b0 The issue was discovered on Dell Inspiron 7352/0W6WV0 laptop with following sequence: 1. Suspend to RAM 2. Wake up with the same backtrace being observed: 3. 2nd suspend to RAM attempt makes laptop freeze Fix it by using __pci_bus_assign_resources() instead of pci_assign_unassigned_bridge_resources() as we used to do, but only in case when bus doesn't have a bridge associated (to cover for the case of ACPI event on hostbridge or non existing root port). That lets us keep hotplug on root bus working like it used to and at the same time keeps resource reassignment usable on root ports (and other 1st level bridges) that was fixed by 40613da52b13. Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") Link: https://lore.kernel.org/r/20230726123518.2361181-2-imammedo@redhat.com Reported-by: Woody Suwalski <terraluna977@gmail.com> Tested-by: Woody Suwalski <terraluna977@gmail.com> Tested-by: Michal Koutný <mkoutny@suse.com> Link: https://lore.kernel.org/r/11fc981c-af49-ce64-6b43-3e282728bd1a@gmail.com Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-30PCI: acpiphp: Reassign resources on bridge if necessaryIgor Mammedov1-4/+1
[ Upstream commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 ] When using ACPI PCI hotplug, hotplugging a device with large BARs may fail if bridge windows programmed by firmware are not large enough. Reproducer: $ qemu-kvm -monitor stdio -M q35 -m 4G \ -global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=on \ -device id=rp1,pcie-root-port,bus=pcie.0,chassis=4 \ disk_image wait till linux guest boots, then hotplug device: (qemu) device_add qxl,bus=rp1 hotplug on guest side fails with: pci 0000:01:00.0: [1b36:0100] type 00 class 0x038000 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x03ffffff] pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x03ffffff] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00001fff] pci 0000:01:00.0: reg 0x1c: [io 0x0000-0x001f] pci 0000:01:00.0: BAR 0: no space for [mem size 0x04000000] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x04000000] pci 0000:01:00.0: BAR 1: no space for [mem size 0x04000000] pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x04000000] pci 0000:01:00.0: BAR 2: assigned [mem 0xfe800000-0xfe801fff] pci 0000:01:00.0: BAR 3: assigned [io 0x1000-0x101f] qxl 0000:01:00.0: enabling device (0000 -> 0003) Unable to create vram_mapping qxl: probe of 0000:01:00.0 failed with error -12 However when using native PCIe hotplug '-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off' it works fine, since kernel attempts to reassign unused resources. Use the same machinery as native PCIe hotplug to (re)assign resources. Link: https://lore.kernel.org/r/20230424191557.2464760-1-imammedo@redhat.com Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-23PCI: tegra194: Fix possible array out of bounds accessSumit Gupta1-2/+11
[ Upstream commit 205b3d02d57ce6dce96f6d2b9c230f56a9bf9817 ] Add check to fix the possible array out of bounds violation by making speed equal to GEN1_CORE_CLK_FREQ when its value is more than the size of "pcie_gen_freq" array. This array has size of four but possible speed (CLS) values are from "0 to 0xF". So, "speed - 1" values are "-1 to 0xE". Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Sumit Gupta <sumitg@nvidia.com> Link: https://lore.kernel.org/lkml/72b9168b-d4d6-4312-32ea-69358df2f2d0@nvidia.com/ Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI: rockchip: Don't advertise MSI-X in PCIe capabilitiesRick Wertenbroek2-0/+29
[ Upstream commit a52587e0bee14cbeeadf48a24013828cb04b8df8 ] The RK3399 PCIe endpoint controller cannot generate MSI-X IRQs. This is documented in the RK3399 technical reference manual (TRM) section 17.5.9 "Interrupt Support". MSI-X capability should therefore not be advertised. Remove the MSI-X capability by editing the capability linked-list. The previous entry is the MSI capability, therefore get the next entry from the MSI-X capability entry and set it as next entry for the MSI capability. This in effect removes MSI-X from the list. Linked list before : MSI cap -> MSI-X cap -> PCIe Device cap -> ... Linked list now : MSI cap -> PCIe Device cap -> ... Link: https://lore.kernel.org/r/20230418074700.1083505-11-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI: rockchip: Fix window mapping and address translation for endpointRick Wertenbroek2-88/+75
[ Upstream commit dc73ed0f1b8bddd7f2bf70d123e68ffc99ad71ce ] The RK3399 PCI endpoint core has 33 windows for PCIe space, now in the driver up to 32 fixed size (1M) windows are used and pages are allocated and mapped accordingly. The driver first used a single window and allocated space inside which caused translation issues (between CPU space and PCI space) because a window can only have a single translation at a given time, which if multiple pages are allocated inside will cause conflicts. Now each window is a single region of 1M which will always guarantee that the translation is not in conflict. Set the translation register addresses for physical function. As documented in the technical reference manual (TRM) section 17.5.5 "PCIe Address Translation" and section 17.6.8 "Address Translation Registers Description" Link: https://lore.kernel.org/r/20230418074700.1083505-9-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI: rockchip: Remove writes to unused registersRick Wertenbroek1-10/+0
[ Upstream commit 92a9c57c325dd51682d428ba960d961fec3c8a08 ] Remove write accesses to registers that are marked "unused" (and therefore read-only) in the technical reference manual (TRM) (see RK3399 TRM 17.6.8.1) Link: https://lore.kernel.org/r/20230418074700.1083505-2-rick.wertenbroek@gmail.com Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Stable-dep-of: dc73ed0f1b8b ("PCI: rockchip: Fix window mapping and address translation for endpoint") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI/ASPM: Avoid link retraining raceIlpo Järvinen1-0/+11
[ Upstream commit e7e39756363ad5bd83ddeae1063193d0f13870fd ] PCIe r6.0.1, sec 7.5.3.7, recommends setting the link control parameters, then waiting for the Link Training bit to be clear before setting the Retrain Link bit. This avoids a race where the LTSSM may not use the updated parameters if it is already in the midst of link training because of other normal link activity. Wait for the Link Training bit to be clear before toggling the Retrain Link bit to ensure that the LTSSM uses the updated link control parameters. [bhelgaas: commit log, return 0 (success)/-ETIMEDOUT instead of bool for both pcie_wait_for_retrain() and the existing pcie_retrain_link()] Suggested-by: Lukas Wunner <lukas@wunner.de> Fixes: 7d715a6c1ae5 ("PCI: add PCI Express ASPM support") Link: https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI/ASPM: Factor out pcie_wait_for_retrain()Ilpo Järvinen1-12/+18
[ Upstream commit 9c7f136433d26592cb4d9cd00b4e15c33d9797c6 ] Factor pcie_wait_for_retrain() out from pcie_retrain_link(). No functional change intended. [bhelgaas: split out from https: //lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com] Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Stable-dep-of: e7e39756363a ("PCI/ASPM: Avoid link retraining race") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-03PCI/ASPM: Return 0 or -ETIMEDOUT from pcie_retrain_link()Bjorn Helgaas1-9/+11
[ Upstream commit f5297a01ee805d7fa569d288ed65fc0f9ac9b03d ] "pcie_retrain_link" is not a question with a true/false answer, so "bool" isn't quite the right return type. Return 0 for success or -ETIMEDOUT if the retrain failed. No functional change intended. [bhelgaas: based on Ilpo's patch below] Link: https://lore.kernel.org/r/20230502083923.34562-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Stable-dep-of: e7e39756363a ("PCI/ASPM: Avoid link retraining race") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-23PCI: rockchip: Set address alignment for endpoint modeDamien Le Moal1-0/+1
commit 7e6689b34a815bd379dfdbe9855d36f395ef056c upstream. The address translation unit of the rockchip EP controller does not use the lower 8 bits of a PCIe-space address to map local memory. Thus we must set the align feature field to 256 to let the user know about this constraint. Link: https://lore.kernel.org/r/20230418074700.1083505-12-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Use u32 variable to access 32-bit registersRick Wertenbroek2-5/+6
commit 8962b2cb39119cbda4fc69a1f83957824f102f81 upstream. Previously u16 variables were used to access 32-bit registers, this resulted in not all of the data being read from the registers. Also the left shift of more than 16-bits would result in moving data out of the variable. Use u32 variables to access 32-bit registers Link: https://lore.kernel.org/r/20230418074700.1083505-10-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint coreRick Wertenbroek2-35/+16
commit 166e89d99dd85a856343cca51eee781b793801f2 upstream. Fix legacy IRQ generation for RK3399 PCIe endpoint core according to the technical reference manual (TRM). Assert and deassert legacy interrupt (INTx) through the legacy interrupt control register ("PCIE_CLIENT_LEGACY_INT_CTRL") instead of manually generating a PCIe message. The generation of the legacy interrupt was tested and validated with the PCIe endpoint test driver. Link: https://lore.kernel.org/r/20230418074700.1083505-8-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be lockedRick Wertenbroek2-0/+19
commit 9dd3c7c4c8c3f7f010d9cdb7c3f42506d93c9527 upstream. The RK3399 PCIe controller should wait until the PHY PLLs are locked. Add poll and timeout to wait for PHY PLLs to be locked. If they cannot be locked generate error message and jump to error handler. Accessing registers in the PHY clock domain when PLLs are not locked causes hang The PHY PLLs status is checked through a side channel register. This is documented in the TRM section 17.5.8.1 "PCIe Initialization Sequence". Link: https://lore.kernel.org/r/20230418074700.1083505-5-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Write PCI Device ID to correct registerRick Wertenbroek2-2/+6
commit 1f1c42ece18de365c976a060f3c8eb481b038e3a upstream. Write PCI Device ID (DID) to the correct register. The Device ID was not updated through the correct register. Device ID was written to a read-only register and therefore did not work. The Device ID is now set through the correct register. This is documented in the RK3399 TRM section 17.6.6.1.1 Link: https://lore.kernel.org/r/20230418074700.1083505-3-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: rockchip: Assert PCI Configuration Enable bit after probeRick Wertenbroek1-0/+3
commit f397fd4ac1fa3afcabd8cee030f953ccaed2a364 upstream. Assert PCI Configuration Enable bit after probe. When this bit is left to 0 in the endpoint mode, the RK3399 PCIe endpoint core will generate configuration request retry status (CRS) messages back to the root complex. Assert this bit after probe to allow the RK3399 PCIe endpoint core to reply to configuration requests from the root complex. This is documented in section 17.5.8.1.2 of the RK3399 TRM. Link: https://lore.kernel.org/r/20230418074700.1083505-4-rick.wertenbroek@gmail.com Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Tested-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: epf-test: Fix DMA transfer completion detectionDamien Le Moal1-11/+27
commit 933f31a2fe1f20e5b1ee065579f652cd1b317183 upstream. pci_epf_test_data_transfer() and pci_epf_test_dma_callback() are not handling DMA transfer completion correctly, leading to completion notifications to the RC side that are too early. This problem can be detected when the RC side is running an IOMMU with messages such as: pci-endpoint-test 0000:0b:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x001c address=0xfff00000 flags=0x0000] When running the pcitest.sh tests: the address used for a previous test transfer generates the above error while the next test transfer is running. Fix this by testing the DMA transfer status in pci_epf_test_dma_callback() and notifying the completion only when the transfer status is DMA_COMPLETE or DMA_ERROR. Furthermore, in pci_epf_test_data_transfer(), be paranoid and check again the transfer status and always call dmaengine_terminate_sync() before returning. Link: https://lore.kernel.org/r/20230415023542.77601-5-dlemoal@kernel.org Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: epf-test: Fix DMA transfer completion initializationDamien Le Moal1-1/+1
commit 4aca56f8eae8aa44867ddd6aa107e06f7613226f upstream. Reinitialize the transfer_complete DMA transfer completion before calling tx_submit(), to avoid seeing the DMA transfer complete before the completion is initialized, thus potentially losing the completion notification. Link: https://lore.kernel.org/r/20230415023542.77601-4-dlemoal@kernel.org Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: qcom: Disable write access to read only registers for IP v2.3.3Manivannan Sadhasivam1-0/+2
commit a33d700e8eea76c62120cb3dbf5e01328f18319a upstream. In the post init sequence of v2.9.0, write access to read only registers are not disabled after updating the registers. Fix it by disabling the access after register update. Link: https://lore.kernel.org/r/20230619150408.8468-2-manivannan.sadhasivam@linaro.org Fixes: 5d76117f070d ("PCI: qcom: Add support for IPQ8074 PCIe controller") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: Add function 1 DMA alias quirk for Marvell 88SE9235Robin Murphy1-0/+2
commit 88d341716b83abd355558523186ca488918627ee upstream. Marvell's own product brief implies the 92xx series are a closely related family, and sure enough it turns out that 9235 seems to need the same quirk as the other three, although possibly only when certain ports are used. Link: https://lore.kernel.org/linux-iommu/2a699a99-545c-1324-e052-7d2f41fed1ae@yahoo.co.uk/ Link: https://lore.kernel.org/r/731507e05d70239aec96fcbfab6e65d8ce00edd2.1686157165.git.robin.murphy@arm.com Reported-by: Jason Adriaanse <jason_a69@yahoo.co.uk> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI: Release resource invalidated by coalescingRoss Lagerwall1-1/+3
commit e54223275ba1bc6f704a6bab015fcd2ae4f72572 upstream. When contiguous windows are coalesced by pci_register_host_bridge(), the second resource is expanded to include the first, and the first is invalidated and consequently not added to the bus. However, it remains in the resource hierarchy. For example, these windows: fec00000-fec7ffff : PCI Bus 0000:00 fec80000-fecbffff : PCI Bus 0000:00 are coalesced into this, where the first resource remains in the tree with start/end zeroed out: 00000000-00000000 : PCI Bus 0000:00 fec00000-fecbffff : PCI Bus 0000:00 In some cases (e.g. the Xen scratch region), this causes future calls to allocate_resource() to choose an inappropriate location which the caller cannot handle. Fix by releasing the zeroed-out resource and removing it from the resource hierarchy. [bhelgaas: commit log] Fixes: 7c3855c423b1 ("PCI: Coalesce host bridge contiguous apertures") Link: https://lore.kernel.org/r/20230525153248.712779-1-ross.lagerwall@citrix.com Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.16+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-23PCI/PM: Avoid putting EloPOS E2/S2/H2 PCIe Ports in D3coldOndrej Zary1-5/+5
commit 9e30fd26f43b89cb6b4e850a86caa2e50dedb454 upstream. The quirk for Elo i2 introduced in commit 92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") is also needed by EloPOS E2/S2/H2 which uses the same Continental Z2 board. Change the quirk to match the board instead of system. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215715 Link: https://lore.kernel.org/r/20230614074253.22318-1-linux@zary.sk Signed-off-by: Ondrej Zary <linux@zary.sk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-19PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()Xinghui Li1-1/+2
[ Upstream commit 0c0206dc4f5ba2d18b15e24d2047487d6f73916b ] The ret variable in the vmd_enable_domain() function was used uninitialized when printing a warning message upon failure of the pci_reset_bus() function. Thus, fix the issue by assigning ret with the value returned from pci_reset_bus() before referencing it in the warning message. This was detected by Smatch: drivers/pci/controller/vmd.c:931 vmd_enable_domain() error: uninitialized symbol 'ret'. [kwilczynski: drop the second patch from the series, add missing reported by tag, commit log] Fixes: 0a584655ef89 ("PCI: vmd: Fix secondary bus reset for Intel bridges") Link: https://lore.kernel.org/all/202305270219.B96IiIfv-lkp@intel.com Link: https://lore.kernel.org/linux-pci/20230420094332.1507900-2-korantwork@gmail.com Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Xinghui Li <korantli@tencent.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: endpoint: functions/pci-epf-test: Fix dma_chan directionYoshihiro Shimoda1-1/+1
[ Upstream commit 880d51c729a3fa944794feb19f605eefe55916fc ] In pci_epf_test_init_dma_chan() epf_test->dma_chan_rx is assigned from dma_request_channel() with DMA_DEV_TO_MEM as filter.dma_mask. However, in pci_epf_test_data_transfer() if the dir is DMA_DEV_TO_MEM, epf->dma_chan_rx should be used but instead we are using epf_test->dma_chan_tx. Fix it. Link: https://lore.kernel.org/r/20230412063447.2841177-1-yoshihiro.shimoda.uh@renesas.com Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities") Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: endpoint: Fix a Kconfig prompt of vNTB driverShunsuke Mie1-1/+1
[ Upstream commit 37587673cda963ec950e4983db5023802f9b5ff2 ] vNTB driver and NTB driver have same Kconfig prompt. Changed to make it distinguishable. Link: https://lore.kernel.org/r/20230202103832.2038286-1-mie@igel.co.jp Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Signed-off-by: Shunsuke Mie <mie@igel.co.jp> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: endpoint: Fix Kconfig indent styleShunsuke Mie1-9/+9
[ Upstream commit 2759ddf7535d63381f9b9b1412e4c46e13ed773a ] Change to follow the Kconfig style guide. This patch fixes to use tab rather than space to indent, while help text is indented an additional two spaces. Link: https://lore.kernel.org/r/20220815025006.48167-1-mie@igel.co.jp Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Signed-off-by: Shunsuke Mie <mie@igel.co.jp> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Stable-dep-of: 37587673cda9 ("PCI: endpoint: Fix a Kconfig prompt of vNTB driver") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: qcom: Disable write access to read only registers for IP v2.9.0Manivannan Sadhasivam1-0/+3
[ Upstream commit 200b8f85f2021362adcc8efb575652a2aa44c099 ] In the post init sequence of v2.9.0, write access to read only registers are not disabled after updating the registers. Fix it by disabling the access after register update. While at it, let's also add a newline after existing dw_pcie_dbi_ro_wr_en() guard function to align with rest of the driver. Link: https://lore.kernel.org/r/20230619150408.8468-4-manivannan.sadhasivam@linaro.org Fixes: 0cf7c2efe8ac ("PCI: qcom: Add IPQ60xx support") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: qcom: Use DWC helpers for modifying the read-only DBI registersManivannan Sadhasivam1-5/+3
[ Upstream commit 60f0072d7fb7996b9a524ef0d152e21205473192 ] DWC core already exposes dw_pcie_dbi_ro_wr_{en/dis} helper APIs for enabling and disabling the write access to read only DBI registers. So let's use them instead of doing it manually. Also, the existing code doesn't disable the write access when it's done. This is also fixed now. Link: https://lore.kernel.org/r/20230619150408.8468-3-manivannan.sadhasivam@linaro.org Fixes: 5d76117f070d ("PCI: qcom: Add support for IPQ8074 PCIe controller") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: qcom: Use lower case for hexManivannan Sadhasivam1-7/+7
[ Upstream commit 94ebd232dbc84dfdfbf0c406137a8b2aa8b37a01 ] To maintain uniformity, let's use lower case for representing hexadecimal numbers. Link: https://lore.kernel.org/r/20230316081117.14288-7-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Stable-dep-of: 60f0072d7fb7 ("PCI: qcom: Use DWC helpers for modifying the read-only DBI registers") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: qcom: Sort and group registers and bitfield definitionsManivannan Sadhasivam1-45/+63
[ Upstream commit 769e49d87b15c302c9aadd87c7d114cfe7052320 ] Sorting the registers and their bit definitions will make it easier to add more definitions in the future and it also helps in maintenance. While at it, let's also group the registers and bit definitions separately as done in the pcie-qcom-ep driver. Link: https://lore.kernel.org/r/20230316081117.14288-4-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Stable-dep-of: 60f0072d7fb7 ("PCI: qcom: Use DWC helpers for modifying the read-only DBI registers") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: qcom: Remove PCIE20_ prefix from register definitionsManivannan Sadhasivam1-93/+91
[ Upstream commit 39171b33f6523f28c1c1256427e5f50c74b69639 ] The PCIE part is redundant and 20 doesn't represent anything across the SoCs supported now. So let's get rid of the prefix. This involves adding the IP version suffix to one definition of PARF_SLV_ADDR_SPACE_SIZE that defines offset specific to that version. The other definition is generic for the rest of the versions. Also, the register PCIE20_LNK_CONTROL2_LINK_STATUS2 is not used anywhere, hence removed. Link: https://lore.kernel.org/r/20230316081117.14288-3-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Stable-dep-of: 60f0072d7fb7 ("PCI: qcom: Use DWC helpers for modifying the read-only DBI registers") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: ftpci100: Release the clock resourcesJunyan Ye1-12/+2
[ Upstream commit c60738de85f40b0b9f5cb23c21f9246e5a47908c ] Smatch reported: 1. drivers/pci/controller/pci-ftpci100.c:526 faraday_pci_probe() warn: 'clk' from clk_prepare_enable() not released on lines: 442,451,462,478,512,517. 2. drivers/pci/controller/pci-ftpci100.c:526 faraday_pci_probe() warn: 'p->bus_clk' from clk_prepare_enable() not released on lines: 451,462,478,512,517. The clock resource is obtained by devm_clk_get(), and then clk_prepare_enable() makes the clock resource ready for use. After that, clk_disable_unprepare() should be called to release the clock resource when it is no longer needed. However, while doing some error handling in faraday_pci_probe(), clk_disable_unprepare() is not called to release clk and p->bus_clk before returning. These return lines are exactly 442, 451, 462, 478, 512, 517. Fix this warning by replacing devm_clk_get() with devm_clk_get_enabled(), which is equivalent to devm_clk_get() + clk_prepare_enable(). And with devm_clk_get_enabled(), the clock will automatically be disabled, unprepared and freed when the device is unbound from the bus. Link: https://lore.kernel.org/r/20230508043641.23807-1-yejunyan@hust.edu.cn Fixes: b3c433efb8a3 ("PCI: faraday: Fix wrong pointer passed to PTR_ERR()") Fixes: 2eeb02b28579 ("PCI: faraday: Add clock handling") Fixes: 783a862563f7 ("PCI: faraday: Use pci_parse_request_of_pci_ranges()") Fixes: d3c68e0a7e34 ("PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driver") Fixes: f1e8bd21e39e ("PCI: faraday: Convert IRQ masking to raw PCI config accessors") Signed-off-by: Junyan Ye <yejunyan@hust.edu.cn> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: pciehp: Cancel bringup sequence if card is not presentRongguang Wei1-0/+8
[ Upstream commit e8afd0d9fccc27c8ad263db5cf5952cfcf72d6fe ] If a PCIe hotplug slot has an Attention Button, the normal hot-add flow is: - Slot is empty and slot power is off - User inserts card in slot and presses Attention Button - OS blinks Power Indicator for 5 seconds - After 5 seconds, OS turns on Power Indicator, turns on slot power, and enumerates the device Previously, if a user pressed the Attention Button on an *empty* slot, pciehp logged the following messages and blinked the Power Indicator until a second button press: [0.000] pciehp: Button press: will power on in 5 sec [0.001] # Power Indicator starts blinking [5.001] # 5 second timeout; slot is empty, so we should cancel the request to power on and turn off Power Indicator [7.000] # Power Indicator still blinking [8.000] # possible card insertion [9.000] pciehp: Button press: canceling request to power on The first button press incorrectly left the slot in BLINKINGON_STATE, so the second was interpreted as a "cancel power on" event regardless of whether a card was present. If the slot is empty, turn off the Power Indicator and return from BLINKINGON_STATE to OFF_STATE after 5 seconds, effectively canceling the request to power on. Putting the slot in OFF_STATE also means the second button press will correctly request a slot power on if the slot is occupied. [bhelgaas: commit log] Link: https://lore.kernel.org/r/20230512021518.336460-1-clementwei90@163.com Fixes: d331710ea78f ("PCI: pciehp: Become resilient to missed events") Suggested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Rongguang Wei <weirongguang@kylinos.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-freeDing Hui1-9/+12
[ Upstream commit 456d8aa37d0f56fc9e985e812496e861dcd6f2f2 ] Struct pcie_link_state->downstream is a pointer to the pci_dev of function 0. Previously we retained that pointer when removing function 0, and subsequent ASPM policy changes dereferenced it, resulting in a use-after-free warning from KASAN, e.g.: # echo 1 > /sys/bus/pci/devices/0000:03:00.0/remove # echo powersave > /sys/module/pcie_aspm/parameters/policy BUG: KASAN: slab-use-after-free in pcie_config_aspm_link+0x42d/0x500 Call Trace: kasan_report+0xae/0xe0 pcie_config_aspm_link+0x42d/0x500 pcie_aspm_set_policy+0x8e/0x1a0 param_attr_store+0x162/0x2c0 module_attr_store+0x3e/0x80 PCIe spec r6.0, sec 7.5.3.7, recommends that software program the same ASPM Control value in all functions of multi-function devices. Disable ASPM and free the pcie_link_state when any child function is removed so we can discard the dangling pcie_link_state->downstream pointer and maintain the same ASPM Control configuration for all functions. [bhelgaas: commit log and comment] Debugged-by: Zongquan Qin <qinzongquan@sangfor.com.cn> Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Fixes: b5a0a9b59c81 ("PCI/ASPM: Read and set up L1 substate capabilities") Link: https://lore.kernel.org/r/20230507034057.20970-1-dinghui@sangfor.com.cn Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: vmd: Reset VMD config register between soft rebootsNirmal Patel1-0/+8
[ Upstream commit b61cf04c49c3dfa70a0d6725d3eb40bf9b35cf71 ] VMD driver can disable or enable MSI remapping by changing VMCONFIG_MSI_REMAP register. This register needs to be set to the default value during soft reboots. Drives failed to enumerate when Windows boots after performing a soft reboot from Linux. Windows doesn't support MSI remapping disable feature and stale register value hinders Windows VMD driver initialization process. Adding vmd_shutdown function to make sure to set the VMCONFIG register to the default value. Link: https://lore.kernel.org/r/20230224202811.644370-1-nirmal.patel@linux.intel.com Fixes: ee81ee84f873 ("PCI: vmd: Disable MSI-X remapping when possible") Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Jon Derrick <jonathan.derrick@linux.dev> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-19PCI: cadence: Fix Gen2 Link Retraining processSiddharth Vadapalli1-0/+27
[ Upstream commit 0e12f830236928b6fadf40d917a7527f0a048d2f ] The Link Retraining process is initiated to account for the Gen2 defect in the Cadence PCIe controller in J721E SoC. The errata corresponding to this is i2085, documented at: https://www.ti.com/lit/er/sprz455c/sprz455c.pdf The existing workaround implemented for the errata waits for the Data Link initialization to complete and assumes that the link retraining process at the Physical Layer has completed. However, it is possible that the Physical Layer training might be ongoing as indicated by the PCI_EXP_LNKSTA_LT bit in the PCI_EXP_LNKSTA register. Fix the existing workaround, to ensure that the Physical Layer training has also completed, in addition to the Data Link initialization. Link: https://lore.kernel.org/r/20230315070800.1615527-1-s-vadapalli@ti.com Fixes: 4740b969aaf5 ("PCI: cadence: Retrain Link to work around Gen2 training defect") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-29 01:08:19 +0300