summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2011-01-12Merge branch 'stable/xenbus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/xenbus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/xenbus: making backend support modular is too complex xen/pci: Make xen-pcifront be dependent on XEN_XENBUS_FRONTEND xen/xenbus: fixup checkpatch issues in xenbus_probe* xen/netfront: select XEN_XENBUS_FRONTEND xen/xenbus: clean up noise in xenbus_probe_frontend.c xen/xenbus: clean up noise in xenbus_probe_backend.c xen/xenbus: clean up noise in xenbus_probe.c xen/xenbus: cleanup debug noise in xenbus_comms.c xen/xenbus: clean up error handling xen/xenbus: make frontend bus GPL xen/xenbus: make sure backend bus is registered earlier xenbus/frontend: register bus earlier xen: remove xen/evtchn.h xen: add backend driver support xen: separate out frontend xenbus
2011-01-10headers: kobject.h reduxAlexey Dobriyan2-2/+0
Remove kobject.h from files which don't need it, notably, sched.h and fs.h. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-06xen/pci: Make xen-pcifront be dependent on XEN_XENBUS_FRONTENDKonrad Rzeszutek Wilk1-0/+1
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-12-23PCI hotplug: Fix unexpected driver unregister in pciehp_acpi.cRafael J. Wysocki1-1/+2
If pcie_ports_disabled is set, pcie_port_service_register() returns error code and select_detection_mode() should not attempt to unregister dummy_driver and use dummy_slots. It should return PCIEHP_DETECT_ACPI immediately instead. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-19Merge branches 'x86-fixes-for-linus' and 'perf-fixes-for-linus' of ↵Linus Torvalds2-0/+28
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-32: Make sure we can map all of lowmem if we need to x86, vt-d: Handle previous faults after enabling fault handling x86: Enable the intr-remap fault handling after local APIC setup x86, vt-d: Fix the vt-d fault handling irq migration in the x2apic mode x86, vt-d: Quirk for masking vtd spec errors to platform error handling logic x86, xsave: Use alloc_bootmem_align() instead of alloc_bootmem() bootmem: Add alloc_bootmem_align() x86, gcc-4.6: Use gcc -m options when building vdso x86: HPET: Chose a paranoid safe value for the ETIME check x86: io_apic: Avoid unused variable warning when CONFIG_GENERIC_PENDING_IRQ=n * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix off by one in perf_swevent_init() perf: Fix duplicate events with multiple-pmu vs software events ftrace: Have recordmcount honor endianness in fn_ELF_R_INFO scripts/tags.sh: Add magic for trace-events tracing: Fix panic when lseek() called on "trace" opened for writing
2010-12-17Revert "PCI: allocate bus resources from the top down"Bjorn Helgaas1-48/+5
This reverts commit b126b4703afa4010b161784a43650337676dd03b. We're going back to the old behavior of allocating from bus resources in _CRS order. Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-17Revert "PCI: fix pci_bus_alloc_resource() hang, prefer positive decode"Bjorn Helgaas1-49/+21
This reverts commit 82e3e767c21fef2b1b38868e20eb4e470a1e38e3. We're going back to considering bus resources in the order we found them (in _CRS order, when we're using _CRS), so we don't need to define any ordering. Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-17PCI: Update MCP55 quirk to not affect non HyperTransport variantsNeil Horman1-0/+3
I wrote this quirk awhile ago to properly setup MCP55 chips on hypertransport busses so that interrupts reached whatever cpu happend to boot the kdump kernel. while that works well, it was recently shown to me that a a non-hypertransport variant of the MCP55 exists, and on those system the register that this quirk manipulates causes hangs if you write to it. Since the quirk was only meant to handle errors found on MCP55 chips that have a HT interface, this patch adds a filter to make sure the chip is an HT capable before making the needed register adjustment. This lets the broken MCP55s work with kdump while not breaking the non-HT variants. Resolves https://bugzilla.kernel.org/show_bug.cgi?id=23952 Tested successfully by the reporter and myself. Cc: stable@kernel.org Reported-by: Mathieu Bérard <mathieu@mberard.eu> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-14x86, vt-d: Handle previous faults after enabling fault handlingSuresh Siddha1-0/+5
Fault handling is getting enabled after enabling the interrupt-remapping (as the success of interrupt-remapping can affect the apic mode and hence the fault handling mode). Hence there can potentially be some faults between the window of enabling interrupt-remapping in the vt-d and the fault-handling of the vt-d units. Handle any previous faults after enabling the vt-d fault handling. For v2.6.38 cleanup, need to check if we can remove the dmar_fault() in the enable_intr_remapping() and see if we can enable fault handling along with enabling intr-remapping. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20101201062244.630417138@intel.com> Cc: stable@kernel.org [v2.6.32+] Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-12-14x86, vt-d: Quirk for masking vtd spec errors to platform error handling logicSuresh Siddha1-0/+23
On platforms with Intel 7500 chipset, there were some reports of system hang/NMI's during kexec/kdump in the presence of interrupt-remapping enabled. During kdump, there is a window where the devices might be still using old kernel's interrupt information, while the kdump kernel is coming up. This can cause vt-d faults as the interrupt configuration from the old kernel map to null IRTE entries in the new kernel etc. (with out interrupt-remapping enabled, we still have the same issue but in this case we will see benign spurious interrupt hit the new kernel). Based on platform config settings, these platforms seem to generate NMI/SMI when a vt-d fault happens and there were reports that the resulting SMI causes the system to hang. Fix it by masking vt-d spec defined errors to platform error reporting logic. VT-d spec related errors are already handled by the VT-d OS code, so need to report the same error through other channels. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1291667190.2675.8.camel@sbsiddha-MOBL3.sc.intel.com> Cc: stable@kernel.org [v2.6.32+] Reported-by: Max Asbock <masbock@linux.vnet.ibm.com> Reported-and-tested-by: Takao Indoh <indou.takao@jp.fujitsu.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-11-25Merge branch 'drivers' of ↵Linus Torvalds2-0/+19
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile * 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: pci root complex: support for tile architecture drivers/net/tile/: on-chip network drivers for the tile architecture MAINTAINERS: add drivers/char/hvc_tile.c as maintained by tile
2010-11-24pci root complex: support for tile architectureChris Metcalf2-0/+19
This change enables PCI root complex support for TILEPro. Unlike TILE-Gx, TILEPro has no support for memory-mapped I/O, so the PCI support consists of hypervisor upcalls for PIO, DMA, etc. However, the performance is fine for the devices we have tested with so far (1Gb Ethernet, SATA, etc.). The <asm/io.h> header was tweaked to be a little bit more aggressive about disabling attempts to map/unmap IO port space. The hacky <asm/pci-bridge.h> header was rolled into the <asm/pci.h> header and the result was simplified. Both of the latter two headers were preliminary versions not meant for release before now - oh well. There is one quirk for our TILEmpower platform, which accidentally negotiates up to 5GT and needs to be kicked down to 2.5GT. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2010-11-17BKL: remove extraneous #include <smp_lock.h>Arnd Bergmann1-1/+0
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-16PCI: fix offset check for sysfs mmapped filesDarrick J. Wong1-1/+1
I just loaded 2.6.37-rc2 on my machines, and I noticed that X no longer starts. Running an strace of the X server shows that it's doing this: open("/sys/bus/pci/devices/0000:07:00.0/resource0", O_RDWR) = 10 mmap(NULL, 16777216, PROT_READ|PROT_WRITE, MAP_SHARED, 10, 0) = -1 EINVAL (Invalid argument) This code seems to be asking for a shared read/write mapping of 16MB worth of BAR0 starting at file offset 0, and letting the kernel assign a starting address. Unfortunately, this -EINVAL causes X not to start. Looking into dmesg, there's a complaint like so: process "Xorg" tried to map 0x01000000 bytes at page 0x00000000 on 0000:07:00.0 BAR 0 (start 0x 96000000, size 0x 1000000) ...with the following code in pci_mmap_fits: pci_start = (mmap_api == PCI_MMAP_SYSFS) ? pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0; if (start >= pci_start && start < pci_start + size && start + nr <= pci_start + size) It looks like the logic here is set up such that when the mmap call comes via sysfs, the check in pci_mmap_fits wants vma->vm_pgoff to be between the resource's start and end address, and the end of the vma to be no farther than the end. However, the sysfs PCI resource files always start at offset zero, which means that this test always fails for programs that mmap the sysfs files. Given the comment in the original commit 3b519e4ea618b6943a82931630872907f9ac2c2b, I _think_ the old procfs files require that the file offset be equal to the resource's base address when mmapping. I think what we want here is for pci_start to be 0 when mmap_api == PCI_MMAP_PROCFS. The following patch makes that change, after which the Matrox and Mach64 X drivers work again. Acked-by: Martin Wilck <martin.wilck@ts.fujitsu.com> Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-16Merge branch 'for-linus' of ↵Linus Torvalds6-29/+91
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: sysfs: fix printk warnings PCI: fix pci_bus_alloc_resource() hang, prefer positive decode PCI: read current power state at enable time PCI: fix size checks for mmap() on /proc/bus/pci files x86/PCI: coalesce overlapping host bridge windows PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area
2010-11-15PCI: sysfs: fix printk warningsRandy Dunlap1-1/+2
Cast pci_resource_start() and pci_resource_len() to u64 for printk. drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 9 has type 'resource_size_t' drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 10 has type 'resource_size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-12PCI: fix pci_bus_alloc_resource() hang, prefer positive decodeBjorn Helgaas1-21/+49
When a PCI bus has two resources with the same start/end, e.g., pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd7ffffff pref] pci_bus 0000:04: resource 7 [mem 0xd0000000-0xd7ffffff] the previous pci_bus_find_resource_prev() implementation would alternate between them forever: pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff pref]) returns [mem 0xd0000000-0xd7ffffff] pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff]) returns [mem 0xd0000000-0xd7ffffff pref] pci_bus_find_resource_prev(... [mem 0xd0000000-0xd7ffffff pref]) returns [mem 0xd0000000-0xd7ffffff] ... This happened because there was no ordering between two resources with the same start and end. A resource that had the same start and end as the cursor, but was not itself the cursor, was considered to be before the cursor. This patch fixes the hang by making a fixed ordering between any two resources. In addition, it tries to allocate from positively decoded regions before using any subtractively decoded resources. This means we will use a positive decode region before a subtractive decode one, even if it means using a smaller address. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=22062 Reported-by: Borislav Petkov <bp@amd64.org> Tested-by: Borislav Petkov <bp@amd64.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-11PCI: read current power state at enable timeJesse Barnes1-0/+12
When we enable a PCI device, we avoid doing a lot of the initial setup work if the device's enable count is non-zero. If we don't fetch the power state though, we may later fail to set up MSI due to the unknown status. So pick it up before we short circuit the rest due to a pre-existing enable or mismatched enable/disable pair (as happens with VGA devices, which are special in a special way). Tested-by: Jesse Brandeburg <jesse.brandeburg@gmail.com> Reported-by: Dave Airlie <airlied@linux.ie> Tested-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-11PCI: fix size checks for mmap() on /proc/bus/pci filesMartin Wilck3-8/+23
The checks for valid mmaps of PCI resources made through /proc/bus/pci files that were introduced in 9eff02e2042f96fb2aedd02e032eca1c5333d767 have several problems: 1. mmap() calls on /proc/bus/pci files are made with real file offsets > 0, whereas under /sys/bus/pci/devices, the start of the resource corresponds to offset 0. This may lead to false negatives in pci_mmap_fits(), which implicitly assumes the /sys/bus/pci/devices layout. 2. The loop in proc_bus_pci_mmap doesn't skip empty resouces. This leads to false positives, because pci_mmap_fits() doesn't treat empty resources correctly (the calculated size is 1 << (8*sizeof(resource_size_t)-PAGE_SHIFT) in this case!). 3. If a user maps resources with BAR > 0, pci_mmap_fits will emit bogus WARNINGS for the first resources that don't fit until the correct one is found. On many controllers the first 2-4 BARs are used, and the others are empty. In this case, an mmap attempt will first fail on the non-empty BARs (including the "right" BAR because of 1.) and emit bogus WARNINGS because of 3., and finally succeed on the first empty BAR because of 2. This is certainly not the intended behaviour. This patch addresses all 3 issues. Updated with an enum type for the additional parameter for pci_mmap_fits(). Cc: stable@kernel.org Signed-off-by: Martin Wilck <martin.wilck@ts.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-11PCI hotplug: ibmphp: Add check to prevent reading beyond mapped areaSteven Rostedt1-0/+6
While testing various randconfigs with ktest.pl, I hit the following panic: BUG: unable to handle kernel paging request at f7e54b03 IP: [<c0d63409>] ibmphp_access_ebda+0x101/0x19bb Adding printks, I found that the loop that reads the ebda blocks can move out of the mapped section. ibmphp_access_ebda: start=f7e44c00 size=5120 end=f7e46000 ibmphp_access_ebda: io_mem=f7e44d80 offset=384 ibmphp_access_ebda: io_mem=f7e54b03 offset=65283 The start of the iomap was at f7e44c00 and had a size of 5120, making the end f7e46000. We start with an offset of 0x180 or 384, giving the first read at 0xf7e44d80. Reading that location yields 65283, which is much bigger than the 5120 that was allocated and makes the next read at f7e54b03 which is outside the mapped area. Perhaps this is a bug in the driver, or buggy hardware, but this patch is more about not crashing my box on start up and just giving a warning if it detects this error. This patch at least lets my box boot with just a warning. Cc: Chandru Siddalingappa <chandru@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-08xen-pcifront: fix PCI reference leakJiri Slaby1-2/+3
Stanse found that when pdev is found and has no driver a reference is leaked in pcifront_common_process. So add pci_dev_put there. For the pdev == NULL case, pci_dev_put(NULL) is fine. [v2: Updated to not dereference pcidev->dev per Milton's observation] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Milton Miller <miltonm@bga.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-08xen-pcifront: Remove duplicate inclusion of headers.Jesper Juhl1-1/+0
In drivers/pci/xen-pcifront.c the xen/xenbus.h header is included twice - once is enough. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-29Merge branch 'stable/xen-pcifront-0.8.2' of ↵Linus Torvalds5-2/+1184
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: register xen pci notifier xen: initialize cpu masks for pv guests in xen_smp_init xen: add a missing #include to arch/x86/pci/xen.c xen: mask the MTRR feature from the cpuid xen: make hvc_xen console work for dom0. xen: add the direct mapping area for ISA bus access xen: Initialize xenbus for dom0. xen: use vcpu_ops to setup cpu masks xen: map a dummy page for local apic and ioapic in xen_set_fixmap xen: remap MSIs into pirqs when running as initial domain xen: remap GSIs as pirqs when running as initial domain xen: introduce XEN_DOM0 as a silent option xen: map MSIs into pirqs xen: support GSI -> pirq remapping in PV on HVM guests xen: add xen hvm acpi_register_gsi variant acpi: use indirect call to register gsi in different modes xen: implement xen_hvm_register_pirq xen: get the maximum number of pirqs from xen xen: support pirq != irq * 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits) X86/PCI: Remove the dependency on isapnp_disable. xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright. x86: xen: Sanitse irq handling (part two) swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it. MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer. xen/pci: Request ACS when Xen-SWIOTLB is activated. xen-pcifront: Xen PCI frontend driver. xenbus: prevent warnings on unhandled enumeration values xenbus: Xen paravirtualised PCI hotplug support. xen/x86/PCI: Add support for the Xen PCI subsystem x86: Introduce x86_msi_ops msi: Introduce default_[teardown|setup]_msi_irqs with fallback. x86/PCI: Export pci_walk_bus function. x86/PCI: make sure _PAGE_IOMAP it set on pci mappings x86/PCI: Clean up pci_cache_line_size xen: fix shared irq device passthrough xen: Provide a variant of xen_poll_irq with timeout. xen: Find an unbound irq number in reverse order (high to low). xen: statically initialize cpu_evtchn_mask_p ... Fix up trivial conflicts in drivers/pci/Makefile
2010-10-28Merge branch 'linux-next' of ↵Linus Torvalds15-22/+206
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (27 commits) x86: allocate space within a region top-down x86: update iomem_resource end based on CPU physical address capabilities x86/PCI: allocate space from the end of a region, not the beginning PCI: allocate bus resources from the top down resources: support allocating space within a region from the top down resources: handle overflow when aligning start of available area resources: ensure callback doesn't allocate outside available space resources: factor out resource_clip() to simplify find_resource() resources: add a default alignf to simplify find_resource() x86/PCI: MMCONFIG: fix region end calculation PCI: Add support for polling PME state on suspended legacy PCI devices PCI: Export some PCI PM functionality PCI: fix message typo PCI: log vendor/device ID always PCI: update Intel chipset names and defines PCI: use new ccflags variable in Makefile PCI: add PCI_MSIX_TABLE/PBA defines PCI: add PCI vendor id for STmicroelectronics x86/PCI: irq and pci_ids patch for Intel Patsburg DeviceIDs PCI: OLPC: Only enable PCI configuration type override on XO-1 ...
2010-10-28proc_bus_pci_ioctl: remove pointless BKL usageLinus Torvalds1-3/+0
The BKL was pushed into this function when it was converted to use the unlocked_ioctl interface, but nothing that the function touches is actually protected by the BKL. So just remove the BKL entirely, so that we finally can get a realistic system build without the BKL being enabled at all. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27PCI: allocate bus resources from the top downBjorn Helgaas1-5/+48
Allocate space from the highest-address PCI bus resource first, then work downward. Previously, we looked for space in PCI host bridge windows in the order we discovered the windows. For example, given the following windows (discovered via an ACPI _CRS method): pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff] pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xf7ffffff] pci_root PNP0A03:00: host bridge window [mem 0xff980000-0xff980fff] pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff] pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff] we attempted to allocate from [mem 0x000a0000-0x000bffff] first, then [mem 0x000c0000-0x000effff], and so on. With this patch, we allocate from [mem 0xff980000-0xff980fff] first, then [mem 0xff97c000-0xff97ffff], [mem 0xfed20000-0xfed9ffff], etc. Allocating top-down follows Windows practice, so we're less likely to trip over BIOS defects in the _CRS description. On the machine above (a Dell T3500), the [mem 0xbff00000-0xbfffffff] region doesn't actually work and is likely a BIOS defect. The symptom is that we move the AHCI controller to 0xbff00000, which leads to "Boot has failed, sleeping forever," a BUG in ahci_stop_engine(), or some other boot failure. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228#c43 Reference: https://bugzilla.redhat.com/show_bug.cgi?id=620313 Reference: https://bugzilla.redhat.com/show_bug.cgi?id=629933 Reported-by: Brian Bloniarz <phunge0@hotmail.com> Reported-and-tested-by: Stefan Becker <chemobejk@gmail.com> Reported-by: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-25Merge branch 'for-next' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-23Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds8-55/+49
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: remove in_workqueue_context() workqueue: Clarify that schedule_on_each_cpu is synchronous memory_hotplug: drop spurious calls to flush_scheduled_work() shpchp: update workqueue usage pciehp: update workqueue usage isdn/eicon: don't call flush_scheduled_work() from diva_os_remove_soft_isr() workqueue: add and use WQ_MEM_RECLAIM flag workqueue: fix HIGHPRI handling in keep_working() workqueue: add queue_work and activate_work trace points workqueue: prepare for more tracepoints workqueue: implement flush[_delayed]_work_sync() workqueue: factor out start_flush_work() workqueue: cleanup flush/cancel functions workqueue: implement alloc_ordered_workqueue() Fix up trivial conflict in fs/gfs2/main.c as per Tejun
2010-10-23Merge commit 'konrad/stable/xen-pcifront-0.8.2' into ↵Stefano Stabellini8-227/+1239
2.6.36-rc8-initial-domain-v6
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds1-0/+1
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-22Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds1-6/+7
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: block: autoconvert trivial BKL users to private mutex drivers: autoconvert trivial BKL users to private mutex ipmi: autoconvert trivial BKL users to private mutex mac: autoconvert trivial BKL users to private mutex mtd: autoconvert trivial BKL users to private mutex scsi: autoconvert trivial BKL users to private mutex Fix up trivial conflicts (due to addition of private mutex right next to deletion of a version string) in drivers/char/pcmcia/cm40[04]0_cs.c
2010-10-22Merge branch 'x86-iommu-for-linus' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, iommu: Update header comments with appropriate naming ia64, iommu: Add a dummy iommu_table.h file in IA64. x86, iommu: Fix IOMMU_INIT alignment rules x86, doc: Adding comments about .iommu_table and its neighbors. x86, iommu: Utilize the IOMMU_INIT macros functionality. x86, VT-d: Make Intel VT-d IOMMU use IOMMU_INIT_* macros. x86, GART/AMD-VI: Make AMD GART and IOMMU use IOMMU_INIT_* macros. x86, calgary: Make Calgary IOMMU use IOMMU_INIT_* macros. x86, xen-swiotlb: Make Xen-SWIOTLB use IOMMU_INIT_* macros. x86, swiotlb: Make SWIOTLB use IOMMU_INIT_* macros. x86, swiotlb: Simplify SWIOTLB pci_swiotlb_detect routine. x86, iommu: Add proper dependency sort routine (and sanity check). x86, iommu: Make all IOMMU's detection routines return a value. x86, iommu: Add IOMMU_INIT macros, .iommu_table section, and iommu_table_entry structure
2010-10-20Merge branch 'linus' into irq/coreIngo Molnar1-0/+20
Merge reason: update to almost-final-.36 Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18xen-pcifront: Xen PCI frontend driver.Ryan Wilson3-0/+1171
This is a port of the 2.6.18 Xen PCI front driver with fixes to make it build under 2.6.34 and later (for the full list of changes: git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git historic/xen-pcifront-0.1). It also includes the fixes to make it work properly. [v2: Updated Kconfig, removed crud, added Reviewed-by] [v3: Added 'static', fixed grant table leak, redid Kconfig] [v4: Added one more 'static' and removed comments] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Jan Beulich <JBeulich@novell.com>
2010-10-18msi: Introduce default_[teardown|setup]_msi_irqs with fallback.Thomas Gleixner1-2/+12
Introduce an override for the arch_[teardown|setup]_msi_irqs that can be utilized to fallback to the default arch_* code. If a platform wants to utilize the code paths defined in driver/pci/msi.c it has to define HAVE_DEFAULT_MSI_TEARDOWN_IRQS or HAVE_DEFAULT_MSI_SETUP_IRQS. Otherwise the old mechanism of over-ridding the arch_* works fine. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: x86@kernel.org
2010-10-18x86/PCI: Export pci_walk_bus function.Konrad Rzeszutek Wilk1-0/+1
In preperation of modularizing Xen-pcifront the pci_walk_bus needs to be exported so that the xen-pcifront module can walk call the pci subsystem to walk the PCI devices and claim them. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> [http://marc.info/?l=linux-pci&m=126149958010298&w=2]
2010-10-18Update broken web addresses in the kernel.Justin P. Mattock1-1/+2
The patch below updates broken web addresses in the kernel Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Ben Pfaff <blp@cs.stanford.edu> Acked-by: Hans J. Koch <hjk@linutronix.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-18shpchp: update workqueue usageTejun Heo4-30/+25
* Rename shpchp_wq to shpchp_ordered_wq and add non-ordered shpchp_wq which is used instead of the system workqueue. This is to remove the use of flush_scheduled_work() which is deprecated and scheduled for removal. * With cmwq in place, there's no point in creating workqueues lazily. Create both shpchp_wq and shpchp_ordered_wq upfront. * Include workqueue.h from shpchp.h. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-18pciehp: update workqueue usageTejun Heo4-25/+24
* Rename pciehp_wq to pciehp_ordered_wq and add non-ordered pciehp_wq which is used instead of the system workqueue. This is to remove the use of flush_scheduled_work() which is deprecated and scheduled for removal. * With cmwq in place, there's no point in creating workqueues lazily. Create both pciehp_wq and pciehp_ordered_wq upfront. * Include workqueue.h from pciehp.h. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-18PCI: Add support for polling PME state on suspended legacy PCI devicesMatthew Garrett1-0/+77
Not all hardware vendors hook up the PME line for legacy PCI devices, meaning that wakeup events get lost. The only way around this is to poll the devices to see if their state has changed, so add support for doing that on legacy PCI devices that aren't part of the core chipset. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-18PCI: Export some PCI PM functionalityMatthew Garrett1-3/+0
It's helpful to have some extra PCI power management functions available to platform code, so move the declarations to an exported header. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-18PCI: fix message typoBjorn Helgaas1-1/+1
I missed the closing parenthesis on "(PCI address ...)". Acked-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-18PCI: log vendor/device ID alwaysBjorn Helgaas1-2/+2
Previously we had to have CONFIG_PCI_DEBUG=y or CONFIG_DYNAMIC_DEBUG=y to turn on this printk, but I think the IDs are valuable enough that it's worth putting them in the log always. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-18PCI: use new ccflags variable in Makefilematt mooney1-3/+1
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-18PCI: add PCI_MSIX_TABLE/PBA definesHidetoshi Seto1-2/+2
These are already defined in pcilib's pci/header.h but not in kernel's linux/pci_regs.h. Copy them to avoid using magic numbers. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-16PCI: add quirk for non-symmetric-mode irq routing to versions 0 and 4 of the ↵Neil Horman1-0/+31
MCP55 northbridge A long time ago I worked on a RHEL5 bug in which kdump hung during boot on a set of systems. The systems hung because they never received timer interrupts during calibrate_delay. These systems also all had Opteron processors on a hypertransport bus, bridged to a pci bus via an Nvidia MCP55 northbridge chip. After much wrangling I managed to learn from Nvidia that they have an undocumented register in some versions of that chip which control how legacy interrupts are send to the cpu complex when the ioapic isn't active. Nvidia defaults this register to only send legacy interrupts to the BSP, so if kdump happens to boot on an AP, we never get timer interrupts and boom. I had initially used this quirk as a workaround, with my intent being to move apic initalization to an earlier point in the boot process, so the setting of the register would be irrelevant. Given the work involved in doing that however, the fragile nature of the apic initalization code, and the fact that, over the 2 years since we found this bug, the MCP55 is the only chip which seems to have this issue, I've figure at this point its likely safer to just carry the quirk around. By setting the referenced bits in this hidden register, interrupts will be broadcast to all cpus when the ioapic isn't active on the above described systems. Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-16PCI/PCIe/AER: Disable native AER service if BIOS has precedenceRafael J. Wysocki4-2/+39
There is a design issue related to PCIe AER and _OSC that the BIOS may be asked to grant control of the AER service even if some Hardware Error Source Table (HEST) entries contain information meaning that the BIOS really should control it. Namely, pcie_port_acpi_setup() calls pcie_aer_get_firmware_first() that determines whether or not the AER service should be controlled by the BIOS on the basis of the HEST information for the given PCIe port. The BIOS is asked to grant control of the AER service for a PCIe Root Complex if pcie_aer_get_firmware_first() returns 'false' for at least one root port in that complex, even if all of the other root ports' HEST entries have the FIRMWARE_FIRST flag set (and none of them has the GLOBAL flag set). However, if the AER service is controlled by the kernel, that may interfere with the BIOS' handling of the error sources having the FIRMWARE_FIRST flag. Moreover, there may be PCIe endpoints that have the FIRMWARE_FIRST flag set in HEST and are attached to the root ports in question, in which case it also may be unsafe to ask the BIOS for control of the AER service. For this reason, introduce a function checking if there's at least one PCIe-related HEST entry with the FIRMWARE_FIRST flag set and disable the native AER service altogether if this function returns 'true'. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-16PCI hotplug: ibmphp-hpc: semaphore cleanupThomas Gleixner1-2/+2
Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-16PCI: aerdrv: fix uninitialized variable warningBill Pemberton1-1/+1
quiet the warning about use of uninitialized e_src in aer_isr() e_src is initialized by get_e_source() Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-16PCI: kill BKL in /proc/pciArnd Bergmann1-3/+1
All operations in the pci procfs ioctl functions are atomic, so no lock is needed here. Also add a compat_ioctl method, since all the commands are compatible in 32 bit mode. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Tejun Heo <tj@kernel.org> Cc: linux-pci@vger.kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>