summaryrefslogtreecommitdiff
path: root/drivers/perf
AgeCommit message (Collapse)AuthorFilesLines
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-07-27Merge branch 'for-next/perf' of ↵Will Deacon5-45/+59
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into aarch64/for-next/core Pull in arm perf updates, including support for 64-bit (chained) event counters and some non-critical fixes for some of the system PMU drivers. Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-26drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memorySudeep Holla1-11/+3
Instead of checking the return value of platform_get_resource(), we can use devm_ioremap_resource() which has the NULL pointer check and the memory region requesting. devm_ioremap_resource is designed to replace calls to devm_request_mem_region followed by devm_ioremap, so let's use the same. Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-24drivers/perf: hisi: update the sccl_id/ccl_id when MT is supportedShaokun Zhang1-5/+7
MT bit in MPIDR_EL1 is now supported in certain HiSilicon platforms, so the mapping between sccl_id/ccl_id and affinity level needs to be updated from the generic encoding we originally used. Cc: John Garry <john.garry@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> [will: fixed comment] Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-16Merge 4.18-rc5 into char-misc-nextGreg Kroah-Hartman1-1/+1
We want the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-10arm64: perf: Add support for chaining event countersSuzuki K Poulose1-7/+2
Add support for 64bit event by using chained event counters and 64bit cycle counters. PMUv3 allows chaining a pair of adjacent 32-bit counters, effectively forming a 64-bit counter. The low/even counter is programmed to count the event of interest, and the high/odd counter is programmed to count the CHAIN event, taken when the low/even counter overflows. For CPU cycles, when 64bit mode is requested, the cycle counter is used in 64bit mode. If the cycle counter is not available, falls back to chaining. Cc: Will Deacon <will.deacon@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-10arm_pmu: Tidy up clear_event_idx call backsSuzuki K Poulose1-4/+3
The armpmu uses get_event_idx callback to allocate an event counter for a given event, which marks the selected counter as "used". Now, when we delete the counter, the arm_pmu goes ahead and clears the "used" bit and then invokes the "clear_event_idx" call back, which kind of splits the job between the core code and the backend. To keep things tidy, mandate the implementation of clear_event_idx() and add it for exisiting backends. This will be useful for adding the chained event support, where we leave the event idx maintenance to the backend. Also, when an event is removed from the PMU, reset the hw.idx to indicate that a counter is not allocated for this event, to help the backends do better checks. This will be also used for the chain counter support. Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-10arm_pmu: Add support for 64bit event countersSuzuki K Poulose1-6/+10
Each PMU has a set of 32bit event counters. But in some special cases, the events could be counted using counters which are effectively 64bit wide. e.g, Arm V8 PMUv3 has a 64 bit cycle counter which can count only the CPU cycles. Also, the PMU can chain the event counters to effectively count as a 64bit counter. Add support for tracking the events that uses 64bit counters. This only affects the periods set for each counter in the core driver. Cc: Will Deacon <will.deacon@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-10arm_pmu: Clean up maximum period handlingSuzuki K Poulose1-4/+12
Each PMU defines their max_period of the counter as the maximum value that can be counted. Since all the PMU backends support 32bit counters by default, let us remove the redundant field. No functional changes. Cc: Will Deacon <will.deacon@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap1-0/+1
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-04drivers/perf: Initialise return value in armpmu_request_irqs()Will Deacon1-1/+1
If a PMU doesn't have any IRQs, we should return 0 from armpmu_request_irqs(), rather than uninitialised stack. Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-02perf/arm-cci: Remove VLA usageKees Cook1-12/+26
In the quest to remove all stack VLA usage from the kernel[1], this removes the VLA in favor of a maximum size and adds a sanity check at registration time. The sizes are all explicitly enumerated already, so this just collects them into macros. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-06-18drivers/perf: xgene_pmu: Fix IOB SLOW PMU parser errorHoan Tran1-1/+1
This patch fixes the below parser error of the IOB SLOW PMU. # perf stat -a -e iob-slow0/cycle-count/ sleep 1 evenf syntax error: 'iob-slow0/cycle-count/' \___ parser error It replaces the "-" character by "_" character inside the PMU name. Signed-off-by: Hoan Tran <hoan.tran@amperecomputing.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-29drivers/bus: arm-cci: fix build warningsArnd Bergmann1-3/+3
When the arm-cci driver is enabled, but both CONFIG_ARM_CCI5xx_PMU and CONFIG_ARM_CCI400_PMU are not, we get a warning about how parts of the driver are never used: drivers/perf/arm-cci.c:1454:29: error: 'cci_pmu_models' defined but not used [-Werror=unused-variable] drivers/perf/arm-cci.c:693:16: error: 'cci_pmu_event_show' defined but not used [-Werror=unused-function] drivers/perf/arm-cci.c:685:16: error: 'cci_pmu_format_show' defined but not used [-Werror=unused-function] Marking all three functions as __maybe_unused avoids the warnings in randconfig builds. I'm doing this lacking any ideas for a better fix. Fixes: 3de6be7a3dd8 ("drivers/bus: Split Arm CCI driver") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-22drivers/perf: Remove ARM_SPE_PMU explicit PERF_EVENTS dependencyJohn Garry1-1/+1
Since commit bddb9b68d3fb ("drivers/perf: commonise PERF_EVENTS dependency"), all perf drivers depend on PERF_EVENTS config under a common menu. Config ARM_SPE_PMU still declares explicitly a dependency on PERF_EVENTS, which is unneeded, so remove it. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-21drivers/perf: arm-ccn: don't log to dmesg in event_initMark Rutland1-10/+10
The ARM CCN PMU driver uses dev_warn() to complain about parameters in the user-provided perf_event_attr. This means that under normal operation (e.g. a single invocation of the perf tool), a number of messages warnings may be logged to dmesg. Tools may issue multiple syscalls to probe for feature support, and multiple applications (from multiple users) can attempt to open events simultaneously, so this is not very helpful, even if a user happens to have access to dmesg. Worse, this can push important information out of the dmesg ring buffer, and can significantly slow down syscall fuzzers, vastly increasing the time it takes to find critical bugs. Demote the dev_warn() instances to dev_dbg(), as is the case for all other PMU drivers under drivers/perf/. Users who wish to debug PMU event initialisation can enable dynamic debug to receive these messages. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-21perf/arm-cci: Allow building as a moduleRobin Murphy2-17/+34
Fill in the few extra bits and annotations needed to make the driver work properly as a module, and jiggle the Kconfig to expose the driver-level ARM_CCI_PMU option. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-21perf/arm-cci: Remove pointless PMU disablingRobin Murphy1-10/+3
The CCI PMU driver bears some legacy remnants of the arm_pmu framework from when it was split in c6f85cb4305b ("bus: cci: move away from arm_pmu framework"). In particular this perf_pmu_{dis,en}able() dance around pmu->add which was fixed for arm_pmu in a9e469d1c89b ("drivers/perf: arm_pmu: remove pointless PMU disabling"). For the exact same reasons (i.e. perf core already does this around the call anyway), give cci_pmu_add() the exact same change, which also prevents having to export those core functions to build it as a module. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-21perf/arm-cc*: Fix MODULE_LICENSE() tagsRobin Murphy2-2/+2
The CCI/CCN drivers are licensed under GPLv2, but the MODULE_LICENSE() tags are using the bare "GPL" string implying GPLv2 or later. Fix them to match their actual file license. Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-21arm_pmu: simplify arm_pmu::handle_irqMark Rutland1-1/+1
The arm_pmu::handle_irq() callback has the same prototype as a generic IRQ handler, taking the IRQ number and a void pointer argument which it must convert to an arm_pmu pointer. This means that all arm_pmu::handle_irq() take an IRQ number they never use, and all must explicitly cast the void pointer to an arm_pmu pointer. Instead, let's change arm_pmu::handle_irq to take an arm_pmu pointer, allowing these casts to be removed. The redundant IRQ number parameter is also removed. Suggested-by: Hoeun Ryu <hoeun.ryu@lge.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-21perf/arm-cci: Remove unnecessary period adjustmentRobin Murphy1-9/+0
Since sampling events are rejected up-front by cci_pmu_event_init(), it doesn't make much sense to go fiddling with the sampling period later. This would seem to be just another leftover artefact of the arm_pmu framwork, and as such can go. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-05-21perf: simplify getting .drvdataWolfram Sang1-4/+2
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-04-06Merge tag 'armsoc-drivers' of ↵Linus Torvalds4-0/+3354
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "The main addition this time around is the new ARM "SCMI" framework, which is the latest in a series of standards coming from ARM to do power management in a platform independent way. This has been through many review cycles, and it relies on a rather interesting way of using the mailbox subsystem, but in the end I agreed that Sudeep's version was the best we could do after all. Other changes include: - the ARM CCN driver is moved out of drivers/bus into drivers/perf, which makes more sense. Similarly, the performance monitoring portion of the CCI driver are moved the same way and cleaned up a little more. - a series of updates to the SCPI framework - support for the Mediatek mt7623a SoC in drivers/soc - support for additional NVIDIA Tegra hardware in drivers/soc - a new reset driver for Socionext Uniphier - lesser bug fixes in drivers/soc, drivers/tee, drivers/memory, and drivers/firmware and drivers/reset across platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (87 commits) reset: uniphier: add ethernet reset control support for PXs3 reset: stm32mp1: Enable stm32mp1 reset driver dt-bindings: reset: add STM32MP1 resets reset: uniphier: add Pro4/Pro5/PXs2 audio systems reset control reset: imx7: add 'depends on HAS_IOMEM' to fix unmet dependency reset: modify the way reset lookup works for board files reset: add support for non-DT systems clk: scmi: use devm_of_clk_add_hw_provider() API and drop scmi_clocks_remove firmware: arm_scmi: prevent accessing rate_discrete uninitialized hwmon: (scmi) return -EINVAL when sensor information is unavailable amlogic: meson-gx-socinfo: Update soc ids soc/tegra: pmc: Use the new reset APIs to manage reset controllers soc: mediatek: update power domain data of MT2712 dt-bindings: soc: update MT2712 power dt-bindings cpufreq: scmi: add thermal dependency soc: mediatek: fix the mistaken pointer accessed when subdomains are added soc: mediatek: add SCPSYS power domain driver for MediaTek MT7623A SoC soc: mediatek: avoid hardcoded value with bus_prot_mask dt-bindings: soc: add header files required for MT7623A SCPSYS dt-binding dt-bindings: soc: add SCPSYS binding for MT7623 and MT7623A SoC ...
2018-04-05Merge tag 'arm64-upstream' of ↵Linus Torvalds2-1/+15
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "Nothing particularly stands out here, probably because people were tied up with spectre/meltdown stuff last time around. Still, the main pieces are: - Rework of our CPU features framework so that we can whitelist CPUs that don't require kpti even in a heterogeneous system - Support for the IDC/DIC architecture extensions, which allow us to elide instruction and data cache maintenance when writing out instructions - Removal of the large memory model which resulted in suboptimal codegen by the compiler and increased the use of literal pools, which could potentially be used as ROP gadgets since they are mapped as executable - Rework of forced signal delivery so that the siginfo_t is well-formed and handling of show_unhandled_signals is consolidated and made consistent between different fault types - More siginfo cleanup based on the initial patches from Eric Biederman - Workaround for Cortex-A55 erratum #1024718 - Some small ACPI IORT updates and cleanups from Lorenzo Pieralisi - Misc cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits) arm64: uaccess: Fix omissions from usercopy whitelist arm64: fpsimd: Split cpu field out from struct fpsimd_state arm64: tlbflush: avoid writing RES0 bits arm64: cmpxchg: Include linux/compiler.h in asm/cmpxchg.h arm64: move percpu cmpxchg implementation from cmpxchg.h to percpu.h arm64: cmpxchg: Include build_bug.h instead of bug.h for BUILD_BUG arm64: lse: Include compiler_types.h and export.h for out-of-line LL/SC arm64: fpsimd: include <linux/init.h> in fpsimd.h drivers/perf: arm_pmu_platform: do not warn about affinity on uniprocessor perf: arm_spe: include linux/vmalloc.h for vmap() Revert "arm64: Revert L1_CACHE_SHIFT back to 6 (64-byte cache line size)" arm64: cpufeature: Avoid warnings due to unused symbols arm64: Add work around for Arm Cortex-A55 Erratum 1024718 arm64: Delay enabling hardware DBM feature arm64: Add MIDR encoding for Arm Cortex-A55 and Cortex-A35 arm64: capabilities: Handle shared entries arm64: capabilities: Add support for checks based on a list of MIDRs arm64: Add helpers for checking CPU MIDR against a range arm64: capabilities: Clean up midr range helpers arm64: capabilities: Change scope of VHE to Boot CPU feature ...
2018-03-27drivers/perf: arm_pmu_platform: do not warn about affinity on uniprocessorAlexander Monakov1-1/+1
If there is exactly one CPU present, there is no ambiguity: do not warn that PMU setup would need to guess IRQ affinity. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Alexander Monakov <amonakov@ispras.ru> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-27perf: arm_spe: include linux/vmalloc.h for vmap()Arnd Bergmann1-0/+14
On linux-next, I get a build failure in some configurations: drivers/perf/arm_spe_pmu.c: In function 'arm_spe_pmu_setup_aux': drivers/perf/arm_spe_pmu.c:857:14: error: implicit declaration of function 'vmap'; did you mean 'swap'? [-Werror=implicit-function-declaration] buf->base = vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL); ^~~~ swap drivers/perf/arm_spe_pmu.c:857:37: error: 'VM_MAP' undeclared (first use in this function); did you mean 'VM_MPX'? buf->base = vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL); ^~~~~~ VM_MPX drivers/perf/arm_spe_pmu.c:857:37: note: each undeclared identifier is reported only once for each function it appears in drivers/perf/arm_spe_pmu.c: In function 'arm_spe_pmu_free_aux': drivers/perf/arm_spe_pmu.c:878:2: error: implicit declaration of function 'vunmap'; did you mean 'iounmap'? [-Werror=implicit-function-declaration] vmap() is declared in linux/vmalloc.h, so we should include that header file. Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> [will: add additional missing #includes reported by Mark] Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-03-19Merge tag 'v4.16-rc6' into perf/core, to pick up fixesIngo Molnar1-1/+1
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-16perf: Fix sibling iterationPeter Zijlstra6-10/+9
Mark noticed that the change to sibling_list changed some iteration semantics; because previously we used group_list as list entry, sibling events would always have an empty sibling_list. But because we now use sibling_list for both list head and list entry, siblings will report as having siblings. Fix this with a custom for_each_sibling_event() iterator. Fixes: 8343aae66167 ("perf/core: Remove perf_event::group_entry") Reported-by: Mark Rutland <mark.rutland@arm.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: vincent.weaver@maine.edu Cc: alexander.shishkin@linux.intel.com Cc: torvalds@linux-foundation.org Cc: alexey.budankov@linux.intel.com Cc: valery.cherepennikov@intel.com Cc: eranian@google.com Cc: acme@redhat.com Cc: linux-tip-commits@vger.kernel.org Cc: davidcc@google.com Cc: kan.liang@intel.com Cc: Dmitry.Prohorov@intel.com Cc: jolsa@redhat.com Link: https://lkml.kernel.org/r/20180315170129.GX4043@hirez.programming.kicks-ass.net
2018-03-12perf/core: Remove perf_event::group_entryPeter Zijlstra6-8/+7
Now that all the grouping is done with RB trees, we no longer need group_entry and can replace the whole thing with sibling_list. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valery Cherepennikov <valery.cherepennikov@intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-03-06perf/arm-cci: Untangle global cci_ctrl_baseRobin Murphy1-23/+24
Depending directly on the bus driver's global cci_ctrl_base variable is a little unpleasant, and exporting it to allow the PMU driver to be modular would be even more so. Let's make things a little better abstracted by adding the control register block to the cci_pmu instance data alongside the PMU register block, and communicating the mapped address from the bus driver via platform data. It's not practical to try the same thing for the bus driver itself, given that the globals are entangled with the hairy assembly code for port control, so we leave them be there. It would however be prudent to move them to the __ro_after_init section in passing, since the addresses really should never be changing once set. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-06perf/arm-cci: Clean up model discoveryRobin Murphy1-24/+16
Since I am the self-appointed of_device_get_match_data() police, it's only right that I should clean up this driver while I'm otherwise touching it. This also reveals that we're passing around a struct platform_device in places where we only ever care about its regular device, so straighten that out in the process. Acked-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-06perf/arm-cci: Simplify CPU hotplugRobin Murphy1-37/+19
Realistically, systems with multiple CCIs are unlikely to ever exist, and since the driver only actually supports a single instance anyway there's really no need to do the multi-instance hotplug state dance. Take the opportunity to simplify the hotplug-related code all over, addressing the context-migration TODO in the process for good measure. Acked-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-06drivers/bus: Split Arm CCI driverRobin Murphy3-0/+1774
The arm-cci driver is really two entirely separate drivers; one for MCPM port control and the other for the performance monitors. Since they are already relatively self-contained, let's take the plunge and move the PMU parts out to drivers/perf where they belong these days. For non-MCPM systems this leaves a small dependency on the remaining "bus" stub for initial probing and discovery, but we end up with something that still fits the general pattern of its fellow system PMU drivers to ease future maintenance. Moving code to a new file also offers a perfect excuse to modernise the license/copyright headers and clean up some funky linewraps on the way. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Suzuki Poulose <suzuki.poulose@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-06drivers/bus: Move Arm CCN PMU driverRobin Murphy3-0/+1605
The arm-ccn driver is purely a perf driver for the CCN PMU, not a bus driver in the sense of the other residents of drivers/bus/, so let's move it to the appropriate place for SoC PMU drivers. Not to mention moving the documentation accordingly as well. Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-02-28arm_pmu: Use disable_irq_nosync when disabling SPI in CPU teardown hookWill Deacon1-1/+1
Commit 6de3f79112cc ("arm_pmu: explicitly enable/disable SPIs at hotplug") moved all of the arm_pmu IRQ enable/disable calls to the CPU hotplug hooks, regardless of whether they are implemented as PPIs or SPIs. This can lead to us sleeping from atomic context due to disable_irq blocking: | BUG: sleeping function called from invalid context at kernel/irq/manage.c:112 | in_atomic(): 1, irqs_disabled(): 128, pid: 15, name: migration/1 | no locks held by migration/1/15. | irq event stamp: 192 | hardirqs last enabled at (191): [<00000000803c2507>] | _raw_spin_unlock_irq+0x2c/0x4c | hardirqs last disabled at (192): [<000000007f57ad28>] multi_cpu_stop+0x9c/0x140 | softirqs last enabled at (0): [<0000000004ee1b58>] | copy_process.isra.77.part.78+0x43c/0x1504 | softirqs last disabled at (0): [< (null)>] (null) | CPU: 1 PID: 15 Comm: migration/1 Not tainted 4.16.0-rc3-salvator-x #1651 | Hardware name: Renesas Salvator-X board based on r8a7796 (DT) | Call trace: | dump_backtrace+0x0/0x140 | show_stack+0x14/0x1c | dump_stack+0xb4/0xf0 | ___might_sleep+0x1fc/0x218 | __might_sleep+0x70/0x80 | synchronize_irq+0x40/0xa8 | disable_irq+0x20/0x2c | arm_perf_teardown_cpu+0x80/0xac Since the interrupt is always CPU-affine and this code is running with interrupts disabled, we can just use disable_irq_nosync as we know there isn't a concurrent invocation of the handler to worry about. Fixes: 6de3f79112cc ("arm_pmu: explicitly enable/disable SPIs at hotplug") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-20arm_pmu: acpi: request IRQs up-frontMark Rutland3-36/+20
We can't request IRQs in atomic context, so for ACPI systems we'll have to request them up-front, and later associate them with CPUs. This patch reorganises the arm_pmu code to do so. As we no longer have the arm_pmu structure at probe time, a number of prototypes need to be adjusted, requiring changes to the common arm_pmu code and arm_pmu platform code. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-02-20arm_pmu: note IRQs and PMUs per-cpuMark Rutland1-17/+52
To support ACPI systems, we need to request IRQs before we know the associated PMU, and thus we need some percpu variable that the IRQ handler can find the PMU from. As we're going to request IRQs without the PMU, we can't rely on the arm_pmu::active_irqs mask, and similarly need to track requested IRQs with a percpu variable. Signed-off-by: Mark Rutland <mark.rutland@arm.com> [will: made armpmu_count_irq_users static] Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-02-20arm_pmu: explicitly enable/disable SPIs at hotplugMark Rutland1-5/+10
To support ACPI systems, we need to request IRQs before CPUs are hotplugged, and thus we need to request IRQs before we know their associated PMU. This is problematic if a PMU IRQ is pending out of reset, as it may be taken before we know the PMU, and thus the IRQ handler won't be able to handle it, leaving it screaming. To avoid such problems, lets request all IRQs in a disabled state, and explicitly enable/disable them at hotplug time, when we're sure the PMU has been probed. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-02-20arm_pmu: acpi: check for mismatched PPIsMark Rutland3-24/+42
The arm_pmu platform code explicitly checks for mismatched PPIs at probe time, while the ACPI code leaves this to the core code. Future refactoring will make this difficult for the core code to check, so let's have the ACPI code check this explicitly. As before, upon a failure we'll continue on without an interrupt. Ho hum. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-02-20arm_pmu: add armpmu_alloc_atomic()Mark Rutland2-4/+15
In ACPI systems, we don't know the makeup of CPUs until we hotplug them on, and thus have to allocate the PMU datastructures at hotplug time. Thus, we must use GFP_ATOMIC allocations. Let's add an armpmu_alloc_atomic() that we can use in this case. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-02-20arm_pmu: fold platform helpers into platform codeMark Rutland2-21/+21
The armpmu_{request,free}_irqs() helpers are only used by arm_pmu_platform.c, so let's fold them in and make them static. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-02-20arm_pmu: kill arm_pmu_platdataMark Rutland1-23/+4
Now that we have no platforms passing platform data to the arm_pmu code, we can get rid of the platdata and associated hooks, paving the way for rework of our IRQ handling. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-02-07bitmap: replace bitmap_{from,to}_u32arrayYury Norov1-4/+2
with bitmap_{from,to}_arr32 over the kernel. Additionally to it: * __check_eq_bitmap() now takes single nbits argument. * __check_eq_u32_array is not used in new test but may be used in future. So I don't remove it here, but annotate as __used. Tested on arm64 and 32-bit BE mips. [arnd@arndb.de: perf: arm_dsu_pmu: convert to bitmap_from_arr32] Link: http://lkml.kernel.org/r/20180201172508.5739-2-ynorov@caviumnetworks.com [ynorov@caviumnetworks.com: fix net/core/ethtool.c] Link: http://lkml.kernel.org/r/20180205071747.4ekxtsbgxkj5b2fz@yury-thinkpad Link: http://lkml.kernel.org/r/20171228150019.27953-2-ynorov@caviumnetworks.com Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: David Decotigny <decot@googlers.com>, Cc: David S. Miller <davem@davemloft.net>, Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-15perf: dsu: Use signed field for dsu_pmu->num_countersSuzuki K Poulose1-1/+1
We set dsu_pmu->num_counters to -1, when the DSU is allocated but not initialised when none of the CPUs are active in the DSU. However, we use an unsigned field for num_counters. Switch this to a signed field. Fixes: 7520fa99246d ("perf: ARM DynamIQ Shared Unit PMU support") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-01-12Merge branch 'for-next/perf' of ↵Catalin Marinas4-12/+856
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux Support for the Cluster PMU part of the ARM DynamIQ Shared Unit (DSU). * 'for-next/perf' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux: perf: ARM DynamIQ Shared Unit PMU support dt-bindings: Document devicetree binding for ARM DSU PMU arm_pmu: Use of_cpu_node_to_id helper arm64: Use of_cpu_node_to_id helper for CPU topology parsing irqchip: gic-v3: Use of_cpu_node_to_id helper coresight: of: Use of_cpu_node_to_id helper of: Add helper for mapping device node to logical CPU number perf: Export perf_event_update_userpage
2018-01-02perf: ARM DynamIQ Shared Unit PMU supportSuzuki K Poulose3-0/+853
Add support for the Cluster PMU part of the ARM DynamIQ Shared Unit (DSU). The DSU integrates one or more cores with an L3 memory system, control logic, and external interfaces to form a multicore cluster. The PMU allows counting the various events related to L3, SCU etc, along with providing a cycle counter. The PMU can be accessed via system registers, which are common to the cores in the same cluster. The PMU registers follow the semantics of the ARMv8 PMU, mostly, with the exception that the counters record the cluster wide events. This driver is mostly based on the ARMv8 and CCI PMU drivers. The driver only supports ARM64 at the moment. It can be extended to support ARM32 by providing register accessors like we do in arch/arm64/include/arm_dsu_pmu.h. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-01-02arm_pmu: Use of_cpu_node_to_id helperSuzuki K Poulose1-12/+3
Use the new generic helper, of_cpu_node_to_id(), to map a a phandle to the logical CPU number while parsing the PMU irq affinity. Cc: Will Deacon <will.deacon@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-12-11perf: arm_spe: Fail device probe when arm64_kernel_unmapped_at_el0()Will Deacon1-0/+9
When running with the kernel unmapped whilst at EL0, the virtually-addressed SPE buffer is also unmapped, which can lead to buffer faults if userspace profiling is enabled and potentially also when writing back kernel samples unless an expensive drain operation is performed on exception return. For now, fail the SPE driver probe when arm64_kernel_unmapped_at_el0(). Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Laura Abbott <labbott@redhat.com> Tested-by: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-11-15Merge tag 'arm64-upstream' of ↵Linus Torvalds13-10/+3276
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "The big highlight is support for the Scalable Vector Extension (SVE) which required extensive ABI work to ensure we don't break existing applications by blowing away their signal stack with the rather large new vector context (<= 2 kbit per vector register). There's further work to be done optimising things like exception return, but the ABI is solid now. Much of the line count comes from some new PMU drivers we have, but they're pretty self-contained and I suspect we'll have more of them in future. Plenty of acronym soup here: - initial support for the Scalable Vector Extension (SVE) - improved handling for SError interrupts (required to handle RAS events) - enable GCC support for 128-bit integer types - remove kernel text addresses from backtraces and register dumps - use of WFE to implement long delay()s - ACPI IORT updates from Lorenzo Pieralisi - perf PMU driver for the Statistical Profiling Extension (SPE) - perf PMU driver for Hisilicon's system PMUs - misc cleanups and non-critical fixes" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (97 commits) arm64: Make ARMV8_DEPRECATED depend on SYSCTL arm64: Implement __lshrti3 library function arm64: support __int128 on gcc 5+ arm64/sve: Add documentation arm64/sve: Detect SVE and activate runtime support arm64/sve: KVM: Hide SVE from CPU features exposed to guests arm64/sve: KVM: Treat guest SVE use as undefined instruction execution arm64/sve: KVM: Prevent guests from using SVE arm64/sve: Add sysctl to set the default vector length for new processes arm64/sve: Add prctl controls for userspace vector length management arm64/sve: ptrace and ELF coredump support arm64/sve: Preserve SVE registers around EFI runtime service calls arm64/sve: Preserve SVE registers around kernel-mode NEON use arm64/sve: Probe SVE capabilities and usable vector lengths arm64: cpufeature: Move sys_caps_initialised declarations arm64/sve: Backend logic for setting the vector length arm64/sve: Signal handling support arm64/sve: Support vector length resetting for new processes arm64/sve: Core task context handling arm64/sve: Low-level CPU setup ...
2017-11-03perf: arm_spe: Prevent module unload while the PMU is in useSuzuki K Poulose1-0/+1
When the PMU driver is built as a module, the perf expects the pmu->module to be valid, so that the driver is prevented from being unloaded while it is in use. Fix the SPE pmu driver to fill in this field. Cc: Will Deacon <will.deacon@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>