Age | Commit message (Collapse) | Author | Files | Lines |
|
Future platforms should not use different compatibles to differentiate
between eDP and DP mode. Instead, they should use a single compatible as
the IP block is the same. It will be the job of the controller to set the
submode of the PHY accordingly.
The existing platforms will remain with separate compatibles for each
mode.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240324-x1e80100-phy-edp-compatible-refactor-v5-2-a0db5f3150bc@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New hardware support:
- Qualcomm X1E80100 PCIe phy support, SM8550 PCIe1 PHY, SC7180 UFS
PHY and SDM630 USBC support
- Rockchip HDMI/eDP Combo PHY driver
- Mediatek MT8365 CSI phy driver
Updates:
- Rework on Qualcomm phy PCS registers and type-c handling
- Cadence torrent phy updates for multilink configuration
- TI gmii resume support"
* tag 'phy-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (41 commits)
phy: constify of_phandle_args in xlate
phy: ti: tusb1210: Define device IDs
phy: ti: tusb1210: Use temporary variable for struct device
phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver
dt-bindings: phy: Add Rockchip HDMI/eDP Combo PHY schema
phy: ti: gmii-sel: add resume support
phy: mtk-mipi-csi: add driver for CSI phy
dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5
phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz) multilink config for TI J7200
dt-bindings: phy: cadence-torrent: Add a separate compatible for TI J7200
phy: cadence-torrent: Add USXGMII(156.25MHz) + SGMII/QSGMII(100MHz) multilink configuration
phy: cadence-torrent: Add PCIe(100MHz) + USXGMII(156.25MHz) multilink configuration
dt-bindings: phy: cadence-torrent: Add optional input reference clock for PLL1
phy: qcom-qmp-ufs: Switch to devm_clk_bulk_get_all() API
dt-bindings: phy: qmp-ufs: Fix PHY clocks
phy: qcom: sgmii-eth: move PCS registers to separate header
phy: qcom: sgmii-eth: use existing register definitions
phy: qcom: qmp-usbc: drop has_pwrdn_delay handling
phy: qcom: qmp: move common bits definitions to common header
phy: qcom: qmp: split DP PHY registers to separate headers
...
|
|
This patch introduces a new API, tegra_xusb_padctl_get_port_number,
to the Tegra XUSB Pad Controller driver. This API is used to identify
the USB port that is associated with a given PHY.
The function takes a PHY pointer for either a USB2 PHY or USB3 PHY as input
and returns the corresponding port number. If the PHY pointer is invalid,
it returns -ENODEV.
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20240307030328.1487748-2-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Due to a long-standing issue in driver core, drivers may not probe defer
after having registered child devices to avoid triggering a probe
deferral loop (see fbc35b45f9f6 ("Add documentation on meaning of
-EPROBE_DEFER")).
Move registration of the typec switch to after looking up clocks and
other resources.
Note that PHY creation can in theory also trigger a probe deferral when
a 'phy' supply is used. This does not seem to affect the QMP PHY driver
but the PHY subsystem should be reworked to address this (i.e. by
separating initialisation and registration of the PHY).
Fixes: 2851117f8f42 ("phy: qcom-qmp-combo: Introduce orientation switching")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240217150228.5788-7-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Due to a long-standing issue in driver core, drivers may not probe defer
after having registered child devices to avoid triggering a probe
deferral loop (see fbc35b45f9f6 ("Add documentation on meaning of
-EPROBE_DEFER")).
This could potentially also trigger a bug in the DRM bridge
implementation which does not expect bridges to go away even if device
links may avoid triggering this (when enabled).
Move registration of the DRM aux bridge to after looking up clocks and
other resources.
Note that PHY creation can in theory also trigger a probe deferral when
a 'phy' supply is used. This does not seem to affect the QMP PHY driver
but the PHY subsystem should be reworked to address this (i.e. by
separating initialisation and registration of the PHY).
Fixes: 35921910bbd0 ("phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE")
Fixes: 1904c3f578dc ("phy: qcom-qmp-combo: Introduce drm_bridge")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240217150228.5788-6-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args. Make the argument
pointer to const for code safety and readability.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
Link: https://lore.kernel.org/r/20240217093937.58234-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Define device IDs since some of them are being used more than once.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240209160334.2304230-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Use temporary variable for struct device to make code neater.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240209160334.2304230-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The MSM8996 platform has registers setup different to the rest of QMP v3
USB platforms. It has PCS region at 0x600 and no PCS_MISC region, while
other platforms have PCS region at 0x800 and PCS_MISC at 0x600. This
results in the malfunctioning USB host on some of the platforms. The
commit f74c35b630d4 ("phy: qcom-qmp-usb: fix register offsets for
ipq8074/ipq6018") fixed the issue for IPQ platforms, but missed the
SDM845 which has the same register layout.
To simplify future platform addition and to make the driver more future
proof, rename qmp_usb_offsets_v3 to qmp_usb_offsets_v3_msm8996 (to mark
its peculiarity), rename qmp_usb_offsets_ipq8074 to qmp_usb_offsets_v3
and use it for SDM845 platform.
Fixes: 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240213133824.2218916-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add driver for the HDMI/eDP TX Combo PHY found on Rockchip RK3588 SoC.
The PHY is based on a Samsung IP block and supports HDMI 2.1 TMDS, FRL
and eDP links. The maximum data rate is 12Gbps (FRL), while the minimum
is 250Mbps (TMDS).
Only the TMDS link is currently supported.
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240214-phy-hdptx-v4-2-e7974f46c1a7@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The resume callback restores the submode of each PHY.
It uses the submode stored in struct phy_gmii_sel_phy_priv (variable
phy_if_mode). The submode was saved by the set_mode PHY operation.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20240125171754.773909-1-thomas.richard@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This is a new driver that supports the MIPI CSI CD-PHY version 0.5
The number of PHYs depend on the SoC.
Each PHY can support D-PHY only or CD-PHY configuration.
The driver supports only D-PHY mode, so CD-PHY
compatible PHY are configured in D-PHY mode.
[Julien Stephan: simplify driver model: one instance per phy vs
one instance for all phys]
Signed-off-by: Louis Kuo <louis.kuo@mediatek.com>
Signed-off-by: Phi-bang Nguyen <pnguyen@baylibre.com>
[Julien Stephan: refactor code]
Co-developed-by: Julien Stephan <jstephan@baylibre.com>
Signed-off-by: Julien Stephan <jstephan@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240111101738.468916-1-jstephan@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
multilink config for TI J7200
Add a separate compatible and registers map table for TI J7200.
TI J7200 uses Torrent SD0805 version which is a special version
derived from Torrent SD0801 with some differences in register
configurations.
Add register sequences for USXGMII(156.25MHz) + SGMII/QSGMII(100MHz)
multilink config for TI J7200. USXGMII uses PLL0 and SGMII/QSGMII
uses PLL1.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240104133013.2911035-6-sjakhade@cadence.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
multilink configuration
Add register sequences for USXGMII(156.25MHz) + SGMII/QSGMII(100MHz)
multilink configuration. USXGMII uses PLL0 and SGMII/QSGMII uses PLL1.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240104133013.2911035-4-sjakhade@cadence.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
configuration
Torrent PHY can have separate input reference clocks for PLL0 and PLL1.
Add support for dual reference clock multilink configurations.
Add register sequences for PCIe(100MHz) + USXGMII(156.25MHz) multilink
configuration. PCIe uses PLL0 and USXGMII uses PLL1.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240104133013.2911035-3-sjakhade@cadence.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of incrementing the base of the global reg fields, which renders
the second instance of the repeater broken due to wrong offsets, use
regmap with base and offset. As for zeroing out the rest of the tuning
regs, avoid looping though the table and just use the table as is,
as it is already zero initialized.
Fixes: 99a517a582fc ("phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs")
Tested-by: Elliot Berman <quic_eberman@quicinc.com> # sm8650-qrd
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240201-phy-qcom-eusb2-repeater-fixes-v4-1-cf18c8cef6d7@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
It should be 'qphy->vreg' passed to PTR_ERR() when devm_regulator_get() fails.
Fixes: 08e49af50701 ("phy: qcom: Introduce M31 USB PHY driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20230824091345.1072650-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Devicetree spec lists only dashes as valid characters for alias names.
Table 3.2: Valid characters for alias names, Devicee Specification,
Release v0.4
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Fixes: 3fbae284887de ("phy: freescale: phy-fsl-imx8-mipi-dphy: Add i.MX8qxp LVDS PHY mode support")
Link: https://lore.kernel.org/r/20240110093343.468810-1-alexander.stein@ew.tq-group.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Device drivers should just rely on the clocks provided by the devicetree
and enable/disable them based on the requirement. There is no need to
validate the clocks provided by devicetree in the driver. That's the job
of DT schema.
So let's switch to devm_clk_bulk_get_all() API that just gets the clocks
provided by devicetree and remove hardcoded clocks info.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240131-ufs-phy-clock-v3-2-58a49d2f4605@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the external phy working together with phy-omap-usb2 does not implement
send_srp(), we may still attempt to call it. This can happen on an idle
Ethernet gadget triggering a wakeup for example:
configfs-gadget.g1 gadget.0: ECM Suspend
configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup
...
Unable to handle kernel NULL pointer dereference at virtual address
00000000 when execute
...
PC is at 0x0
LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc]
...
musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core]
usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether]
eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c
dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4
sch_direct_xmit from __dev_queue_xmit+0x334/0xd88
__dev_queue_xmit from arp_solicit+0xf0/0x268
arp_solicit from neigh_probe+0x54/0x7c
neigh_probe from __neigh_event_send+0x22c/0x47c
__neigh_event_send from neigh_resolve_output+0x14c/0x1c0
neigh_resolve_output from ip_finish_output2+0x1c8/0x628
ip_finish_output2 from ip_send_skb+0x40/0xd8
ip_send_skb from udp_send_skb+0x124/0x340
udp_send_skb from udp_sendmsg+0x780/0x984
udp_sendmsg from __sys_sendto+0xd8/0x158
__sys_sendto from ret_fast_syscall+0x0/0x58
Let's fix the issue by checking for send_srp() and set_vbus() before
calling them. For USB peripheral only cases these both could be NULL.
Fixes: 657b306a7bdf ("usb: phy: add a new driver for omap usb2 phy")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20240128120556.8848-1-tony@atomide.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Follow the example of the rest of the QMP PHY drivers and move SGMII PCS
registers to a separate header file.
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240126-phy-qmp-merge-common-v2-8-a463d0b57836@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The Qualcomm SGMII SerDes PHY is a QMP PHY. As such, it uses standard
registers for QSERDES COM/RX/TX regions. Use register defines from the
existing headers.
Cc: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240126-phy-qmp-merge-common-v2-7-a463d0b57836@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
None of the PHYs supported by the USBC driver need power down delay.
Drop corresponding flag and code.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240126-phy-qmp-merge-common-v2-6-a463d0b57836@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move bit definitions for the common headers to the common phy-qcom-qmp.h
header.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240126-phy-qmp-merge-common-v2-5-a463d0b57836@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Split the DP PHY register definitions to separate headers, removing them
from the global one.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240126-phy-qmp-merge-common-v2-4-a463d0b57836@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move common init tables code to the common header phy-qcom-qmp-common.h.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240126-phy-qmp-merge-common-v2-3-a463d0b57836@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
All PHYs supported by qmp-usb-legacy driver don't have issues with the
PCS region. Replace qmp_usb_legacy_iomap() with devm_of_iomap().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240126-phy-qmp-merge-common-v2-2-a463d0b57836@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
All PHYs supported by usb-legacy have two lanes. Drop support for
single-lane configuration.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad DYbcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240126-phy-qmp-merge-common-v2-1-a463d0b57836@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Align PCIe0 PHY settings with SM8550 latest PCIe PHY Hardware Programming
Guide.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Link: https://lore.kernel.org/r/1703742157-69840-3-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Align PCIe1 PHY settings with SM8550 latest PCIe PHY Hardware Programming
Guide.
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Link: https://lore.kernel.org/r/1703742157-69840-2-git-send-email-quic_qianyu@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB
controller. Added the driver to drive the USB 3.0 PHY transceivers.
Note: New driver, remove the port status notification on legacy USB PHY.
Use the generic PHY to notify the usb device connect and disconnect.
To avoid using these PHYs would require describing the very same
PHY using both the generic "phy" property and the deprecated "usb-phy"
property.
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Link: https://lore.kernel.org/r/20231213031203.4911-3-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB
controller. Added the driver to drive the USB 2.0 PHY transceivers.
Note: New driver,remove the port status notification on legacy USB PHY.
Use the generic PHY to notify the usb device connect and disconnect.
To avoid using these PHYs would require describing the very same
PHY using both the generic "phy" property and the deprecated "usb-phy"
property.
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Link: https://lore.kernel.org/r/20231213031203.4911-2-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In Realtek SoC, the parameter of usb phy is designed to be able to
do dynamic tuning based in the port status. Therefore, add a notify
callback of phy driver when usb connection/disconnection change.
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Link: https://lore.kernel.org/r/20231213031203.4911-1-stanley_chang@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
According to the datasheet(Table 3-2: Port configuration) the serdes 2
(SD2) can be configured to run QSGMII or SGMII mode. Already the QSGMII
mode is supported in the serdes_muxes list but was missing the SGMII mode.
In this mode the serdes is connected to the port 4.
Therefore add this entry in the list.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20240108205140.1701770-1-horatiu.vultur@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Armada 38x supports 3 functions on serdes #0:
- pcie port 0
- sata port 0
- gbe port 0
Add missing entry for gbe port 0 on serdes 0 to the gbe_mux array.
Because this array looks obscure to new readers, also add a comment
explaining the meaning of rows, columns and values.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240106-fix-a38x-comphy-sd0-gbe0-v1-1-c7fd87272050@solid-run.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Even if device_create_file() returns error code,
rcar_gen3_phy_usb2_probe() will return zero because the "ret" is
variable shadowing.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202312161021.gOLDl48K-lkp@intel.com/
Fixes: 441a681b8843 ("phy: rcar-gen3-usb2: fix implementation for runtime PM")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240105093703.3359949-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add the X1E80100 G3 and G4 configurations.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231223-x1e80100-phy-pcie-v2-3-223c0556908a@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
For consistency, add the QMP v6 registers layout even though
they are the same as v5. Also switch all QMP v6 PHYs to use this
new layout.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231223-x1e80100-phy-pcie-v2-2-223c0556908a@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 23fd679249df ("phy: qcom-qmp: add USB3 PHY support for IPQ6018")
noted that IPQ6018 init is identical to IPQ8074. Yet downstream uses
separate serdes init sequence for IPQ6018. Since already existing IPQ9574
serdes init sequence is identical, just reuse it and fix failing USB3 mode
in IPQ6018.
Fixes: 23fd679249df ("phy: qcom-qmp: add USB3 PHY support for IPQ6018")
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1706026160-17520-3-git-send-email-mantas@8devices.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Commit 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration")
introduced register offsets to the driver but for ipq8074/ipq6018 they do
not match what was in the old style device tree. Example from old
ipq6018.dtsi:
<0x00078200 0x130>, /* Tx */
<0x00078400 0x200>, /* Rx */
<0x00078800 0x1f8>, /* PCS */
<0x00078600 0x044>; /* PCS misc */
which would translate to:
{.., .pcs = 0x800, .pcs_misc = 0x600, .tx = 0x200, .rx = 0x400 }
but was translated to:
{.., .pcs = 0x600, .tx = 0x200, .rx = 0x400 }
So split usb_offsets and fix USB initialization for IPQ8074 and IPQ6018.
Tested only on IPQ6018
Fixes: 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration")
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/1706026160-17520-2-git-send-email-mantas@8devices.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Provide PHY configuration for the USB QMP PHY for the SDM630 / SDM660
platforms.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240116-sdm660-usb3-support-v1-2-2fbd683aea77@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The QMP USB PHYs on msm8998, qcm2290 and some other platforms don't have
the PCS_MISC_CLAMP_ENABLE register. Instead they need to toggle the
register in the TCSR space. Make the new phy-qcom-qmp-usbc driver
correctly handle the clamp register.
Fixes: a51969fafc82 ("phy: qcom-qmp: Add QMP V3 USB3 PHY support for msm8998")
Fixes: 8abe5e778b2c ("phy: qcom-qmp: Add QCM2290 USB3 PHY support")
Cc: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240117-usbc-phy-vls-clamp-v2-3-a950c223f10f@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The USB-C PHYs on the msm8998, QCM2290 and SM6115 platforms use special
register to control which lanes of the Type-C port are used for the
SuperSpeed USB connection. Mimic the qmp-combo driver and handle this
register.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240113-pmi632-typec-v2-12-182d9aa0a5b3@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Now as all dual-lane PHYs have been migrated to a new driver, drop
support for dual lanes configuration. If the PHY uses two lanes for USB,
it is symthom that it should use either a combo USB+DP or a USB-C PHY
driver.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240113-pmi632-typec-v2-11-182d9aa0a5b3@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
In preparation to adding Type-C handling for MSM8998, QCM2290 and SM6115
platforms, create new QMP USB-C PHY driver by splitting mentioned
platforms to a separate file. In future it will also be extended with
support for the DisplayPort handling. It will also be reused later for
such platforms as SDM660, SM6125, SM6150.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240113-pmi632-typec-v2-10-182d9aa0a5b3@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
On SM8550, two sets of UFS PHY settings are provided, one set is to support
HS-G5, another set is to support HS-G4 and lower gears. The two sets of PHY
settings are programming different values to different registers, mixing
the two sets and/or overwriting one set with another set is definitely not
blessed by UFS PHY designers.
To add HS-G5 support for SM8550, split the two sets of PHY settings into
their dedicated overlay tables, only the common parts of the two sets of
PHY settings are left in the .tbls.
Consider we are going to add even higher gear support in future, to avoid
adding more tables with different names, rename the .tbls_hs_g4 and make it
an array, a size of 2 is enough as of now.
In this case, .tbls alone is not a complete set of PHY settings, so either
tbls_hs_overlay[0] or tbls_hs_overlay[1] must be applied on top of the
.tbls to become a complete set of PHY settings.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1703557892-1822-1-git-send-email-quic_cang@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The SC7180 UFS PHY is identical to the one found on SM7150. Add a
compatible for it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: David Wronek <davidwronek@gmail.com>
Link: https://lore.kernel.org/r/20240121-sm7125-upstream-v4-5-f7d1212c8ebb@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support:
- Qualcomm SM8650 UFS, PCIe and USB/DP Combo PHY, eUSB2 PHY, SDX75
USB3, X1E80100 USB3 support
- Mediatek MT8195 support
- Rockchip RK3128 usb2 support
- TI SGMII mode for J784S4
Updates:
- Qualcomm v7 register offsets updates
- Mediatek tphy support for force phy mode switch"
* tag 'phy-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (34 commits)
phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J784S4
phy: ti: gmii-sel: Enable SGMII mode for J784S4
phy: qcom-qmp-usb: Add Qualcomm X1E80100 USB3 PHY support
dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add X1E80100 USB PHY binding
phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document X1E80100 compatible
dt-bindings: phy: qcom: snps-eusb2: Document the X1E80100 compatible
phy: mediatek: tphy: add support force phy mode switch
dt-bindings: phy: mediatek: tphy: add a property for force-mode switch
phy: phy-can-transceiver: insert space after include
phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: fix path to header
phy: renesas: phy-rcar-gen2: use select for GENERIC_PHY
phy: qcom-qmp: qserdes-txrx: Add v7 register offsets
phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets
phy: qcom-qmp: qserdes-com: Add v7 register offsets
phy: qcom-qmp: pcs-usb: Add v7 register offsets
phy: qcom-qmp: pcs: Add v7 register offsets
phy: qcom-qmp: qserdes-txrx: Add some more v6.20 register offsets
phy: qcom-qmp: qserdes-com: Add some more v6 register offsets
...
|