summaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)AuthorFilesLines
2024-01-30phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRPTony Lindgren1-2/+2
If the external phy working together with phy-omap-usb2 does not implement send_srp(), we may still attempt to call it. This can happen on an idle Ethernet gadget triggering a wakeup for example: configfs-gadget.g1 gadget.0: ECM Suspend configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute ... PC is at 0x0 LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc] ... musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core] usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether] eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4 sch_direct_xmit from __dev_queue_xmit+0x334/0xd88 __dev_queue_xmit from arp_solicit+0xf0/0x268 arp_solicit from neigh_probe+0x54/0x7c neigh_probe from __neigh_event_send+0x22c/0x47c __neigh_event_send from neigh_resolve_output+0x14c/0x1c0 neigh_resolve_output from ip_finish_output2+0x1c8/0x628 ip_finish_output2 from ip_send_skb+0x40/0xd8 ip_send_skb from udp_send_skb+0x124/0x340 udp_send_skb from udp_sendmsg+0x780/0x984 udp_sendmsg from __sys_sendto+0xd8/0x158 __sys_sendto from ret_fast_syscall+0x0/0x58 Let's fix the issue by checking for send_srp() and set_vbus() before calling them. For USB peripheral only cases these both could be NULL. Fixes: 657b306a7bdf ("usb: phy: add a new driver for omap usb2 phy") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240128120556.8848-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24phy: lan966x: Add missing serdes mux entryHoratiu Vultur1-0/+2
According to the datasheet(Table 3-2: Port configuration) the serdes 2 (SD2) can be configured to run QSGMII or SGMII mode. Already the QSGMII mode is supported in the serdes_muxes list but was missing the SGMII mode. In this mode the serdes is connected to the port 4. Therefore add this entry in the list. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20240108205140.1701770-1-horatiu.vultur@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24phy: renesas: rcar-gen3-usb2: Fix returning wrong error codeYoshihiro Shimoda1-4/+0
Even if device_create_file() returns error code, rcar_gen3_phy_usb2_probe() will return zero because the "ret" is variable shadowing. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202312161021.gOLDl48K-lkp@intel.com/ Fixes: 441a681b8843 ("phy: rcar-gen3-usb2: fix implementation for runtime PM") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240105093703.3359949-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018Mantas Pucka1-1/+19
Commit 23fd679249df ("phy: qcom-qmp: add USB3 PHY support for IPQ6018") noted that IPQ6018 init is identical to IPQ8074. Yet downstream uses separate serdes init sequence for IPQ6018. Since already existing IPQ9574 serdes init sequence is identical, just reuse it and fix failing USB3 mode in IPQ6018. Fixes: 23fd679249df ("phy: qcom-qmp: add USB3 PHY support for IPQ6018") Signed-off-by: Mantas Pucka <mantas@8devices.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1706026160-17520-3-git-send-email-mantas@8devices.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018Mantas Pucka1-1/+9
Commit 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration") introduced register offsets to the driver but for ipq8074/ipq6018 they do not match what was in the old style device tree. Example from old ipq6018.dtsi: <0x00078200 0x130>, /* Tx */ <0x00078400 0x200>, /* Rx */ <0x00078800 0x1f8>, /* PCS */ <0x00078600 0x044>; /* PCS misc */ which would translate to: {.., .pcs = 0x800, .pcs_misc = 0x600, .tx = 0x200, .rx = 0x400 } but was translated to: {.., .pcs = 0x600, .tx = 0x200, .rx = 0x400 } So split usb_offsets and fix USB initialization for IPQ8074 and IPQ6018. Tested only on IPQ6018 Fixes: 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration") Signed-off-by: Mantas Pucka <mantas@8devices.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1706026160-17520-2-git-send-email-mantas@8devices.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-19Merge tag 'phy-for-6.8' of ↵Linus Torvalds22-47/+1140
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "New Support: - Qualcomm SM8650 UFS, PCIe and USB/DP Combo PHY, eUSB2 PHY, SDX75 USB3, X1E80100 USB3 support - Mediatek MT8195 support - Rockchip RK3128 usb2 support - TI SGMII mode for J784S4 Updates: - Qualcomm v7 register offsets updates - Mediatek tphy support for force phy mode switch" * tag 'phy-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (34 commits) phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J784S4 phy: ti: gmii-sel: Enable SGMII mode for J784S4 phy: qcom-qmp-usb: Add Qualcomm X1E80100 USB3 PHY support dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: Add X1E80100 USB PHY binding phy: qcom-qmp-combo: Add x1e80100 USB/DP combo phys dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document X1E80100 compatible dt-bindings: phy: qcom: snps-eusb2: Document the X1E80100 compatible phy: mediatek: tphy: add support force phy mode switch dt-bindings: phy: mediatek: tphy: add a property for force-mode switch phy: phy-can-transceiver: insert space after include phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY Settings dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: fix path to header phy: renesas: phy-rcar-gen2: use select for GENERIC_PHY phy: qcom-qmp: qserdes-txrx: Add v7 register offsets phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsets phy: qcom-qmp: qserdes-com: Add v7 register offsets phy: qcom-qmp: pcs-usb: Add v7 register offsets phy: qcom-qmp: pcs: Add v7 register offsets phy: qcom-qmp: qserdes-txrx: Add some more v6.20 register offsets phy: qcom-qmp: qserdes-com: Add some more v6 register offsets ...
2024-01-12Merge tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-43/+3
Pull drm updates from Dave Airlie: "This contains two major new drivers: - imagination is a first driver for Imagination Technologies devices, it only covers very specific devices, but there is hope to grow it - xe is a reboot of the i915 GPU (shares display) side using a more upstream focused development model, and trying to maximise code sharing. It's not enabled for any hw by default, and will hopefully get switched on for Intel's Lunarlake. This also drops a bunch of the old UMS ioctls. It's been dead long enough. amdgpu has a bunch of new color management code that is being used in the Steam Deck. amdgpu also has a new ACPI WBRF interaction to help avoid radio interference. Otherwise it's the usual lots of changes in lots of places. Detailed summary: new drivers: - imagination - new driver for Imagination Technologies GPU - xe - new driver for Intel GPUs using core drm concepts core: - add CLOSE_FB ioctl - remove old UMS ioctls - increase max objects to accomodate AMD color mgmt encoder: - create per-encoder debugfs directory edid: - split out drm_eld - SAD helpers - drop edid_firmware module parameter format-helper: - cache format conversion buffers sched: - move from kthread to workqueue - rename some internals - implement dynamic job-flow control gpuvm: - provide more features to handle GEM objects client: - don't acquire module reference displayport: - add mst path property documentation fdinfo: - alignment fix dma-buf: - add fence timestamp helper - add fence deadline support bridge: - transparent aux-bridge for DP/USB-C - lt8912b: add suspend/resume support and power regulator support panel: - edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49 - chromebook panel support - elida-kd35t133: rework pm - powkiddy RK2023 panel - himax-hx8394: drop prepare/unprepare and shutdown logic - BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G - Evervision VGG644804, SDC ATNA45AF01 - nv3052c: register docs, init sequence fixes, fascontek FS035VG158 - st7701: Anbernic RG-ARC support - r63353 panel controller - Ilitek ILI9805 panel controller - AUO G156HAN04.0 simplefb: - support memory regions - support power domains amdgpu: - add new 64-bit sequence number infrastructure - add AMD specific color management - ACPI WBRF support for RF interference handling - GPUVM updates - RAS updates - DCN 3.5 updates - Rework PCIe link speed handling - Document GPU reset types - DMUB fixes - eDP fixes - NBIO 7.9/7.11 updates - SubVP updates - XGMI PCIe state dumping for aqua vanjaram - GFX11 golden register updates - enable tunnelling on high pri compute amdkfd: - Migrate TLB flushing logic to amdgpu - Trap handler fixes - Fix restore workers handling on suspend/resume - Fix possible memory leak in pqm_uninit() - support import/export of dma-bufs using GEM handles radeon: - fix possible overflows in command buffer checking - check for errors in ring_lock i915: - reorg display code for reuse in xe driver - fdinfo memory stats printing - DP MST bandwidth mgmt improvements - DP panel replay enabling - MTL C20 phy state verification - MTL DP DSC fractional bpp support - Audio fastset support - use dma_fence interfaces instead of i915_sw_fence - Separate gem and display code - AUX register macro refactoring - Separate display module/device parameters - Move display capabilities debugfs under display - Makefile cleanups - Register cleanups - Move display lock inits under display/ - VLV/CHV DPIO PHY register and interface refactoring - DSI VBT sequence refactoring - C10/C20 PHY PLL hardware readout - DPLL code cleanups - Cleanup PXP plane protection checks - Improve display debug msgs - PSR selective fetch fixes/improvements - DP MST fixes - Xe2LPD FBC restrictions removed - DGFX uses direct VBT pin mapping - more MTL WAs - fix MTL eDP bug - eliminate use of kmap_atomic habanalabs: - sysfs entry to identify a device minor id with debugfs path - sysfs entry to expose device module id - add signed device info retrieval through INFO ioctl - add Gaudi2C device support - pcie reset prepare/done hooks msm: - Add support for SDM670, SM8650 - Handle the CFG interconnect to fix the obscure hangs / timeouts - Kconfig fix for QMP dependency - use managed allocators - DPU: SDM670, SM8650 support - DPU: Enable SmartDMA on SM8350 and SM8450 - DP: enable runtime PM support - GPU: add metadata UAPI - GPU: move devcoredumps to GPU device - GPU: convert to drm_exec ivpu: - update FW API - new debugfs file - a new NOP job submission test mode - improve suspend/resume - PM improvements - MMU PT optimizations - firmware profile frequency support - support for uncached buffers - switch to gem shmem helpers - replace kthread with threaded irqs rockchip: - rk3066_hdmi: convert to atomic - vop2: support nv20 and nv30 - rk3588 support mediatek: - use devm_platform_ioremap_resource - stop using iommu_present - MT8188 VDOSYS1 display support panfrost: - PM improvements - improve interrupt handling as poweroff qaic: - allow to run with single MSI - support host/device time sync - switch to persistent DRM devices exynos: - fix potential error pointer dereference - fix wrong error checking - add missing call to drm_atomic_helper_shutdown omapdrm: - dma-fence lockdep annotation fix tidss: - dma-fence lockdep annotation fix - support for AM62A7 v3d: - BCM2712 - rpi5 support - fdinfo + gputop support - uapi for CPU job handling virtio-gpu: - add context debug name" * tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits) drm/amd/display: Allow z8/z10 from driver drm/amd/display: fix bandwidth validation failure on DCN 2.1 drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm drm/amd/display: Fix recent checkpatch errors in amdgpu_dm Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole" drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings() drm/amd/display: Fix power_helpers.c codestyle drm/amd/display: Fix hdcp_log.h codestyle drm/amd/display: Fix hdcp2_execution.c codestyle drm/amd/display: Fix hdcp_psp.h codestyle drm/amd/display: Fix freesync.c codestyle drm/amd/display: Fix hdcp_psp.c codestyle drm/amd/display: Fix hdcp1_execution.c codestyle drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()' drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()' drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()' drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()' ...
2023-12-22phy: ti: j721e-wiz: Add SGMII support in WIZ driver for J784S4Chintan Vankar1-0/+1
Enable full rate divider configuration support for J784S4_WIZ_10G for SGMII. Signed-off-by: Chintan Vankar <c-vankar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20231221102956.754617-2-c-vankar@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-22phy: ti: gmii-sel: Enable SGMII mode for J784S4Chintan Vankar1-1/+1
TI's J784S4 SoC supports SGMII mode with the CPSW9G instance of the CPSW Ethernet Switch. Thus, enable it by adding SGMII mode to the list of the corresponding extra_modes member. Signed-off-by: Chintan Vankar <c-vankar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20231221102956.754617-1-c-vankar@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-21phy: qcom-qmp-usb: Add Qualcomm X1E80100 USB3 PHY supportAbel Vesa1-0/+171
The X1E80100 platform has two instances of the USB3 UNI phy attached to the multi-port USB controller, add definition for these. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20231122-phy-qualcomm-usb3-uniphy-x1e80100-v3-2-273814c300f8@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-21phy: qcom-qmp-combo: Add x1e80100 USB/DP combo physAbel Vesa1-0/+170
The X1E80100 has three copies of an USB/DP compbo PHY, add support for this to the Qualcomm QMP PHY driver. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20231201-x1e80100-phy-combo-v1-2-6938ec41f3ac@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-21phy: mediatek: tphy: add support force phy mode switchChunfeng Yun1-0/+25
this is used to be compatible with old SoCs, such as mt8195, which shares t-phy between usb3 and pcie controller, usually, it's default mode is pcie rc mode, and could use force mode to switch into usb3 mode, because pericfg layer doesn't provide mode switch, also no efuse or jumper can be used; Currently, only support switch from default pcie mode to usb3; Note: don't use this way on new SoCs, use pericfg layer's mode switch instead (by perperty "mediatek,syscon-type"). Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20231211025624.28991-2-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-21phy: phy-can-transceiver: insert space after includeWang Jinchao1-5/+5
Maintain Consistent Formatting: Insert Space after #include Signed-off-by: Wang Jinchao <wangjinchao@xfusion.com> Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/202312151407+0800-wangjinchao@xfusion.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-21phy: qualcomm: phy-qcom-qmp-ufs: Rectify SM8550 UFS HS-G4 PHY SettingsCan Guo2-9/+20
The registers, which are being touched in current SM8550 UFS PHY settings, and the values being programmed are mainly the ones working for HS-G4 mode, meanwhile, there are also a few ones somehow taken from HS-G5 PHY settings. However, even consider HS-G4 mode only, some of them are incorrect and some are missing. Rectify the HS-G4 PHY settings by strictly aligning with the SM8550 UFS PHY Hardware Programming Guide suggested HS-G4 PHY settings. Fixes: 1679bfef906f ("phy: qcom-qmp-ufs: Add SM8550 support") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Can Guo <quic_cang@quicinc.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/1701520577-31163-10-git-send-email-quic_cang@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-21phy: renesas: phy-rcar-gen2: use select for GENERIC_PHYRandy Dunlap1-1/+1
Change the last "depends on GENERIC_PHY" to use select, like the other 170+ Kconfig users do. This can help prevent circular dependency issues. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Kishon Vijay Abraham I <kishon@kernel.org> Cc: linux-phy@lists.infradead.org Link: https://lore.kernel.org/r/20231204234917.23509-1-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-21phy: qcom-qmp: qserdes-txrx: Add v7 register offsetsAbel Vesa2-0/+79
The X1E80100 platform bumps the HW version of QMP phy to v7 for USB and PCIE. Add the new qserdes TX RX offsets in a dedicated header file. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20231122-phy-qualcomm-v6-v6-20-v7-new-offsets-v3-7-dfd1c375ef61@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-21phy: qcom-qmp: qserdes-txrx: Add V6 N4 register offsetsAbel Vesa2-0/+52
There is a variant of V6 offsets that are different, the QMP PHY N4, and it is found on the X1E80100 platform. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20231122-phy-qualcomm-v6-v6-20-v7-new-offsets-v3-6-dfd1c375ef61@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-21phy: qcom-qmp: qserdes-com: Add v7 register offsetsAbel Vesa2-0/+89
The X1E80100 platform bumps the HW version of QMP phy to v7 for USB and PCIE g3x2. Add the new qserdes com offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20231122-phy-qualcomm-v6-v6-20-v7-new-offsets-v3-5-dfd1c375ef61@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-21phy: qcom-qmp: pcs-usb: Add v7 register offsetsAbel Vesa1-0/+17
The X1E80100 platform bumps the HW version of QMP phy to v7 for USB. Add the new PCS USB specific offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20231122-phy-qualcomm-v6-v6-20-v7-new-offsets-v3-4-dfd1c375ef61@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-21phy: qcom-qmp: pcs: Add v7 register offsetsAbel Vesa2-0/+34
The X1E80100 platform bumps the HW version of QMP phy to v7 for USB, and PCIe. Add the new PCS offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20231122-phy-qualcomm-v6-v6-20-v7-new-offsets-v3-3-dfd1c375ef61@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-21phy: qcom-qmp: qserdes-txrx: Add some more v6.20 register offsetsAbel Vesa1-0/+4
Add some missing v6.20 registers offsets that are needed by the new Snapdragon X Elite (X1E80100) platform. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20231122-phy-qualcomm-v6-v6-20-v7-new-offsets-v3-2-dfd1c375ef61@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-21phy: qcom-qmp: qserdes-com: Add some more v6 register offsetsAbel Vesa2-0/+6
Add some missing V6 registers offsets that are needed by the new Snapdragon X Elite (X1E80100) platform. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20231122-phy-qualcomm-v6-v6-20-v7-new-offsets-v3-1-dfd1c375ef61@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-12-17Merge tag 'phy-fixes-6.7' of ↵Linus Torvalds3-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy fixes from Vinod Koul: - register offset fix for TI driver - mediatek driver minimal supported frequency fix - negative error code in probe fix for sunplus driver * tag 'phy-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: sunplus: return negative error code in sp_usb_phy_probe phy: mediatek: mipi: mt8183: fix minimal supported frequency phy: ti: gmii-sel: Fix register offset when parent is not a syscon node
2023-12-04phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGEDmitry Baryshkov2-43/+3
Switch to using the new DRM_AUX_BRIDGE helper to create the transparent DRM bridge device instead of handcoding corresponding functionality. Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231203114333.1305826-3-dmitry.baryshkov@linaro.org
2023-11-27phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY supportRohit Agarwal1-0/+173
Add support for USB3 QMP PHY found in SDX75 platform. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20231117061501.537529-1-quic_rohiagar@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-27phy: sunplus: return negative error code in sp_usb_phy_probeSu Hui1-1/+1
devm_phy_create() return negative error code, 'ret' should be 'PTR_ERR(phy)' rather than '-PTR_ERR(phy)'. Fixes: 99d9ccd97385 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021") Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://lore.kernel.org/r/20231120091046.163781-1-suhui@nfschina.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-27phy: phy-rockchip-inno-usb2: Add RK3128 supportAlex Bee1-0/+57
Add registers to support the 2-port usb2 phy found in RK312x SoC familiy. Signed-off-by: Alex Bee <knaerzche@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20231119121340.109025-3-knaerzche@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-27phy: rockchip-inno-usb2: Split ID interrupt phy registersAlex Bee1-29/+70
Commit 51a9b2c03dd3 ("phy: rockchip-inno-usb2: Handle ID IRQ") added ID detection interrupt registers. However the current implementation assumes that falling and rising edge interrupt are always enabled in registers spanning over subsequent bits. That is not the case for RK3128's version of the phy and this implementation can't be used as-is, since there are bits with different purpose in between. This splits up the register definitions for id_det_en, id_det_en and id_det_clr registers in rising and falling edge variants. It's required as preparation to support RK3128's Innosilicon usb2 phy as well in this driver and matches pretty much to what the vendor does, so I'm not expecting issues for other SoCs with that change. Signed-off-by: Alex Bee <knaerzche@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20231119121340.109025-2-knaerzche@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-27phy: mediatek: mipi: mt8183: fix minimal supported frequencyMichael Walle1-1/+1
The lowest supported clock frequency of the PHY is 125MHz (see also mtk_mipi_tx_pll_enable()), but the clamping in .round_rate() has the wrong minimal value, which will make the .enable() op return -EINVAL on low frequencies. Fix the minimal clamping value. Fixes: efda51a58b4a ("drm/mediatek: add mipi_tx driver for mt8183") Signed-off-by: Michael Walle <mwalle@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20231123110202.2025585-1-mwalle@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-16phy: core: Remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET1-2/+2
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/d2323636c6cd2ec22f73a0ae6c2d34ac99b4abd5.1698854255.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-16phy: qcom: qmp-combo: add QMP USB3/DP PHY tables for SM8650Neil Armstrong1-0/+4
Add QMP USB3/DP Combo PHY support for the SM8650 platform. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-phy-v2-7-a543a4c4b491@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-16phy: qcom: qmp-pcie: add QMP PCIe PHY tables for SM8650Neil Armstrong1-0/+65
Add QMP PCIe PHY support for the SM8650 platform. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-phy-v2-6-a543a4c4b491@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-16phy: qcom: qmp-ufs: add QMP UFS PHY tables for SM8650Neil Armstrong3-0/+94
Add QMP UFS PHY support for the SM8650 platform. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231030-topic-sm8650-upstream-phy-v2-5-a543a4c4b491@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-16phy: ti: gmii-sel: Fix register offset when parent is not a syscon nodeAndrew Davis1-1/+4
When the node for this phy selector is a child node of a syscon node then the property 'reg' is used as an offset into the parent regmap. When the node is standalone and gets its own regmap this offset is pre-applied. So we need to track which method was used to get the regmap and not apply the offset in the standalone case. Fixes: 1fdfa7cccd35 ("phy: ti: gmii-sel: Allow parent to not be syscon node") Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20231025143302.1265633-1-afd@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-11-06Revert "phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY"Johan Hovold5-1349/+0
This reverts commit 134e6d25f6bd06071e5aac0a7eefcea6f7713955. The recently added Realtek PHY drivers depend on the new port status notification mechanism which was built on the deprecated USB PHY implementation and devicetree binding. Specifically, using these PHYs would require describing the very same PHY using both the generic "phy" property and the deprecated "usb-phy" property which is clearly wrong. We should not be building new functionality on top of the legacy USB PHY implementation even if it is currently stuck in some kind of transitional limbo. Revert the new Realtek PHY drivers for now so that the port status notification interface can be reverted and replaced. Fixes: 134e6d25f6bd ("phy: realtek: usb: Add driver for the Realtek SoC USB 2.0 PHY") Cc: stable@vger.kernel.org # 6.6 Cc: Stanley Chang <stanley_chang@realtek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231106110654.31090-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-06Revert "phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY"Johan Hovold3-774/+0
This reverts commit adda6e82a7de7d6d478f6c8ef127f0ac51c510a1. The recently added Realtek PHY drivers depend on the new port status notification mechanism which was built on the deprecated USB PHY implementation and devicetree binding. Specifically, using these PHYs would require describing the very same PHY using both the generic "phy" property and the deprecated "usb-phy" property which is clearly wrong. We should not be building new functionality on top of the legacy USB PHY implementation even if it is currently stuck in some kind of transitional limbo. Revert the new Realtek PHY drivers for now so that the port status notification interface can be reverted and replaced. Fixes: adda6e82a7de ("phy: realtek: usb: Add driver for the Realtek SoC USB 3.0 PHY") Cc: stable@vger.kernel.org # 6.6 Cc: Stanley Chang <stanley_chang@realtek.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20231106110654.31090-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-04Merge tag 'phy-for-6.7' of ↵Linus Torvalds27-295/+564
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull generic phy updates from Vinod Koul: "New Support: - Qualcomm sa8775p qmp-pcie, IPQ5018, and SC7280 qmp-ufs support - Mediatek MT8188 support Updates: - Device tree device_get_match_data() usage and dropping of_match_device() calls - Qualcomm qmp usb and combo phy updates for v6 register layout - Qualcomm eusb2-repeater updates for tuning overrides, regmap fields - STih407 usb binding and ralink usb-phy yaml conversion - renesas r8a779f0 serdes init sequencing updates" * tag 'phy-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (32 commits) phy: Remove duplicated include in phy-ralink-usb.c phy: Kconfig: Select GENERIC_PHY for GENERIC_PHY_MIPI_DPHY phy: qcom-qmp-pcie: add endpoint support for sa8775p dt-bindings: phy: ralink-usb-phy: convert to dtschema dt-bindings: phy: Convert PXA1928 USB/HSIC PHY to DT schema phy: Drop unnecessary of_match_device() calls phy: rockchip-inno-usb2: Drop unnecessary DT includes phy: Use device_get_match_data() phy: realtek: Replace of_device.h with explicit includes phy: renesas: r8a779f0-ether-serdes: Add .exit() ops phy: renesas: r8a779f0-ether-serdes: Reset in .init() phy: qcom-qmp-combo: use v6 registers in v6 regs layout phy: qcom-qmp-usb: move PCS v6 register to the proper header phy: qcom-qmp-combo: fix the prefix for the PCS_USB v6 registers phy: sun4i-usb: update array size phy: qualcomm: phy-qcom-eusb2-repeater: Add tuning overrides phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs phy: qualcomm: phy-qcom-eusb2-repeater: Use regmap_fields dt-bindings: phy: qcom,snps-eusb2-repeater: Add magic tuning overrides dt-bindings: phy: Add compatible for Mediatek MT8188 ...
2023-10-23phy: Remove duplicated include in phy-ralink-usb.cYang Li1-1/+0
./drivers/phy/ralink/phy-ralink-usb.c: linux/platform_device.h is included more than once. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6851 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20231017031635.105993-1-yang.lee@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-23phy: Kconfig: Select GENERIC_PHY for GENERIC_PHY_MIPI_DPHYSakari Ailus1-1/+1
GENERIC_PHY can be selected by GENERIC_PHY_MIPI_DPHY directly as GENERIC_PHY has no dependencies. This way drivers that depend on GENERIC_PHY_MIPI_DPHY can avoid having to select both --- which they apparently often omit, too, which further leads to build failures. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20231017080354.538047-1-sakari.ailus@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-23phy: qcom-qmp-pcie: add endpoint support for sa8775pMrinmay Sarkar2-0/+39
Add support for dual lane end point mode PHY found on sa8755p platform. Signed-off-by: Mrinmay Sarkar <quic_msarkar@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1697715430-30820-4-git-send-email-quic_msarkar@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-22Merge tag 'phy-fixes-6.6' of ↵Linus Torvalds9-48/+57
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy fixes from Vinod Koul: - mapphone-mdm6600 runtime pm & pinctrl handling fixes - Qualcomm qmp usb pcs register fixes, qmp pcie register size warning fix, m31 fixes for wrong pointer in PTR_ERR and dropping wrong vreg check, qmp combo fix for 8550 power config register - realtek usb fix for debugfs_create_dir() and kconfig dependency * tag 'phy-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: phy: realtek: Realtek PHYs should depend on ARCH_REALTEK phy: qualcomm: Fix typos in comments phy: qcom-qmp-combo: initialize PCS_USB registers phy: qcom-qmp-combo: Square out 8550 POWER_STATE_CONFIG1 phy: qcom: m31: Remove unwanted qphy->vreg is NULL check phy: realtek: usb: Drop unnecessary error check for debugfs_create_dir() phy: qcom: phy-qcom-m31: change m31_ipq5332_regs to static phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR() dt-bindings: phy: qcom,ipq8074-qmp-pcie: fix warning regarding reg size phy: qcom-qmp-usb: split PCS_USB init table for sc8280xp and sa8775p phy: qcom-qmp-usb: initialize PCS_USB registers phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins phy: mapphone-mdm6600: Fix runtime PM for remove phy: mapphone-mdm6600: Fix runtime disable on probe
2023-10-13phy: Drop unnecessary of_match_device() callsRob Herring2-17/+1
If probe is reached, we've already matched the device and in the case of DT matching, the struct device_node pointer will be set. Therefore, there is no need to call of_match_device() in probe. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231009172923.2457844-16-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-13phy: rockchip-inno-usb2: Drop unnecessary DT includesRob Herring1-2/+0
Neither of_address.h or of_platform.h are used in the driver, so drop them. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20231009172923.2457844-17-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-13phy: Use device_get_match_data()Rob Herring8-55/+26
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20231009172923.2457844-15-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-13phy: realtek: Replace of_device.h with explicit includesRob Herring2-2/+2
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other and pull in various other headers. In preparation to fix this, adjust the includes for what is actually needed. of_device.h isn't needed, but platform_device.h was implicitly included by it. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231010205701.1585026-1-robh@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-13phy: renesas: r8a779f0-ether-serdes: Add .exit() opsYoshihiro Shimoda1-0/+10
Add r8a779f0_eth_serdes_exit() to clear the initialized flag for re-initializing this PHY if needed. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20231011081817.257113-3-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-13phy: renesas: r8a779f0-ether-serdes: Reset in .init()Yoshihiro Shimoda1-2/+4
Reset this PHY in .init() instead of probe() for re-initializing this PHY after probed correctly. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20231011081817.257113-2-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-13phy: qcom-qmp-combo: use v6 registers in v6 regs layoutDmitry Baryshkov3-7/+12
Make sure that we use only v6 registers in qmp_v6_usb3phy_regs_layout. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928105445.1210861-4-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-13phy: qcom-qmp-usb: move PCS v6 register to the proper headerDmitry Baryshkov2-18/+14
The commit 39bbf82d8c2b ("phy: qcom-qmp: pcs-usb: Add v6 register offsets") incorrectly added plain PCS registers to the PCS_USB header. Move them to a proper location. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928105445.1210861-3-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-10-13phy: qcom-qmp-combo: fix the prefix for the PCS_USB v6 registersDmitry Baryshkov2-39/+39
For all other generations, we have been using just the QPHY prefix for the PCS registers. Remove the _USB part of the QPHY_USB prefix. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230928105445.1210861-2-dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-10 23:34:44 +0300