summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2022-11-28pinctrl: intel: Save and restore pins in "direct IRQ" modeAndy Shevchenko1-1/+26
The firmware on some systems may configure GPIO pins to be an interrupt source in so called "direct IRQ" mode. In such cases the GPIO controller driver has no idea if those pins are being used or not. At the same time, there is a known bug in the firmwares that don't restore the pin settings correctly after suspend, i.e. by an unknown reason the Rx value becomes inverted. Hence, let's save and restore the pins that are configured as GPIOs in the input mode with GPIROUTIOXAPIC bit set. Cc: stable@vger.kernel.org Reported-and-tested-by: Dale Smith <dalepsmith@gmail.com> Reported-and-tested-by: John Harris <jmharris@gmail.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214749 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20221124222926.72326-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-22pinctrl: meditatek: Startup with the IRQs disabledRicardo Ribalda1-3/+6
If the system is restarted via kexec(), the peripherals do not start with a known state. If the previous system had enabled an IRQs we will receive unexected IRQs that can lock the system. [ 28.109251] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:0] [ 28.109263] Modules linked in: [ 28.109273] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.79-14458-g4b9edf7b1ac6 #1 9f2e76613148af94acccd64c609a552fb4b4354b [ 28.109284] Hardware name: Google Elm (DT) [ 28.109290] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.109298] pc : __do_softirq+0xa0/0x388 [ 28.109309] lr : __do_softirq+0x70/0x388 [ 28.109316] sp : ffffffc008003ee0 [ 28.109321] x29: ffffffc008003f00 x28: 000000000000000a x27: 0000000000000080 [ 28.109334] x26: 0000000000000001 x25: ffffffefa7b350c0 x24: ffffffefa7b47480 [ 28.109346] x23: ffffffefa7b3d000 x22: 0000000000000000 x21: ffffffefa7b0fa40 [ 28.109358] x20: ffffffefa7b005b0 x19: ffffffefa7b47480 x18: 0000000000065b6b [ 28.109370] x17: ffffffefa749c8b0 x16: 000000000000018c x15: 00000000000001b8 [ 28.109382] x14: 00000000000d3b6b x13: 0000000000000006 x12: 0000000000057e91 [ 28.109394] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffefa7b47480 [ 28.109406] x8 : 00000000000000e0 x7 : 000000000f424000 x6 : 0000000000000000 [ 28.109418] x5 : ffffffefa7dfaca0 x4 : ffffffefa7dfadf0 x3 : 000000000000000f [ 28.109429] x2 : 0000000000000000 x1 : 0000000000000100 x0 : 0000000001ac65c5 [ 28.109441] Call trace: [ 28.109447] __do_softirq+0xa0/0x388 [ 28.109454] irq_exit+0xc0/0xe0 [ 28.109464] handle_domain_irq+0x68/0x90 [ 28.109473] gic_handle_irq+0xac/0xf0 [ 28.109480] call_on_irq_stack+0x28/0x50 [ 28.109488] do_interrupt_handler+0x44/0x58 [ 28.109496] el1_interrupt+0x30/0x58 [ 28.109506] el1h_64_irq_handler+0x18/0x24 [ 28.109512] el1h_64_irq+0x7c/0x80 [ 28.109519] arch_local_irq_enable+0xc/0x18 [ 28.109529] default_idle_call+0x40/0x140 [ 28.109539] do_idle+0x108/0x290 [ 28.109547] cpu_startup_entry+0x2c/0x30 [ 28.109554] rest_init+0xe8/0xf8 [ 28.109562] arch_call_rest_init+0x18/0x24 [ 28.109571] start_kernel+0x338/0x42c [ 28.109578] __primary_switched+0xbc/0xc4 [ 28.109588] Kernel panic - not syncing: softlockup: hung tasks Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20221122-mtk-pinctrl-v1-1-bedf5655a3d2@chromium.org Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-21pinctrl: single: Fix potential division by zeroMaxim Korotkov1-1/+1
There is a possibility of dividing by zero due to the pcs->bits_per_pin if pcs->fmask() also has a value of zero and called fls from asm-generic/bitops/builtin-fls.h or arch/x86/include/asm/bitops.h. The function pcs_probe() has the branch that assigned to fmask 0 before pcs_allocate_pin_table() was called Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 4e7e8017a80e ("pinctrl: pinctrl-single: enhance to configure multiple pins of different modules") Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20221117123034.27383-1-korotkov.maxim.s@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-15pinctrl: mediatek: Export debounce time tablesLinus Walleij1-0/+3
The kernel test robot complains that in certain combinations when building the Mediatek drivers as modules we lack some debounce table symbols, so export them. Reported-by: kernel test robot <lkp@intel.com> Fixes: e1ff91f9d230 ("pinctrl: mediatek: Fix EINT pins input debounce time configuration") Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-14pinctrl: mediatek: Fix EINT pins input debounce time configurationAngeloGioacchino Del Regno22-5/+53
The External Interrupt Controller (EINTC) on all of the supported MediaTek SoCs does support input debouncing, but not all of them index the debounce time values (DBNC_SETTING registers) the same way. Before this change, in some cases, as an example, requesting a debounce time of 16 milliseconds would mistakenly set the relative DBNC_SETTING register to 0x2, resulting in a way shorter debounce time of 500uS. To fix the aforementioned issue, define three different debounce_time arrays, reflecting the correct register index for each value and for each register index variant, and make sure that each SoC pinctrl driver uses the right one. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221111094106.18486-1-angelogioacchino.delregno@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-10pinctrl: devicetree: fix null pointer dereferencing in pinctrl_dt_to_mapZeng Heng1-0/+2
Here is the BUG report by KASAN about null pointer dereference: BUG: KASAN: null-ptr-deref in strcmp+0x2e/0x50 Read of size 1 at addr 0000000000000000 by task python3/2640 Call Trace: strcmp __of_find_property of_find_property pinctrl_dt_to_map kasprintf() would return NULL pointer when kmalloc() fail to allocate. So directly return ENOMEM, if kasprintf() return NULL pointer. Fixes: 57291ce295c0 ("pinctrl: core device tree mapping table parsing support") Signed-off-by: Zeng Heng <zengheng4@huawei.com> Link: https://lore.kernel.org/r/20221110082056.2014898-1-zengheng4@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-09pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPEAngeloGioacchino Del Regno1-0/+3
In pinctrl-paris we're calling the .bias_set_combo() callback when we are asked to set the pin bias to either pull up/down or pull disable. On newer platforms, this callback is mtk_pinconf_bias_set_combo(), located in pinctrl-mtk-common-v2.c: this will check the "pull type" assigned to the requested pin and in case said pin's pull type is MTK_PULL_PU_PD_RSEL_TYPE, this function will set RSEL first, PUPD last, which is fine. The issue comes when we're requesting PIN_CONFIG_BIAS_DISABLE, as this does *not* require setting RSEL but only PU_PD: in this case, the arg is MTK_DISABLE (zero), which is not a supported RSEL, due to which function mtk_pinconf_bias_set_rsel() returns a failure; because of that, mtk_pinconf_bias_set_pu_pd() is never called, hence the pin bias is never set to DISABLE. To fix this issue, add a check to mtk_pinconf_bias_set_rsel(): if we are entering that function with no pullup requested and at the same time the arg is MTK_DISABLE, this means that we're trying to disable pin bias, hence it's safe to return cleanly without ever setting any RSEL register. This makes mtk_pinconf_bias_set_combo() happy, going on with setting the PU_PD registers, which is the only action to actually take to disable bias on a pin/pingroup. Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221104105605.33720-1-angelogioacchino.delregno@collabora.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-08pinctrl: qcom: sc8280xp: Rectify UFS reset pinsAnjana Hari1-2/+2
UFS reset pin offsets are wrongly configured for SC8280XP, correcting the same for both UFS instances here. Signed-off-by: Anjana Hari <quic_ahari@quicinc.com> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # QDrive3 Link: https://lore.kernel.org/r/20221103181051.26912-1-quic_bjorande@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-11-07pinctrl: rockchip: list all pins in a possible mux route for PX30Quentin Schulz1-0/+40
The mux routes are incomplete for the PX30. This was discovered because we had a HW design using cif-clkoutm1 with the correct pinmux in the Device Tree but the clock would still not work. There are actually two muxing required: the pin muxing (performed by the usual Device Tree pinctrl nodes) and the "function" muxing (m0 vs m1; performed by the mux routing inside the driver). The pin muxing was correct but the function muxing was not. This adds the missing pins and their configuration for the mux routes that are already specified in the driver. Note that there are some "conflicts": it is possible *in Device Tree* to (attempt to) mux the pins for e.g. clkoutm1 and clkinm0 at the same time but this is actually not possible in hardware (because both share the same bit for the function muxing). Since it is an impossible hardware design, it is not deemed necessary to prevent the user from attempting to "misconfigure" the pins/functions. Fixes: 87065ca9b8e5 ("pinctrl: rockchip: Add pinctrl support for PX30") Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20221017-upstream-px30-cif-clkoutm1-v1-0-4ea1389237f7@theobroma-systems.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-18pinctrl: ocelot: Fix incorrect trigger of the interrupt.Horatiu Vultur1-4/+13
The interrupt controller can detect only link changes. So in case an external device generated a level based interrupt, then the interrupt controller detected correctly the first edge. But the problem was that the interrupt controller was detecting also the edge when the interrupt was cleared. So it would generate another interrupt. The fix for this is to clear the second interrupt but still check the interrupt line status. Fixes: c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20221018070959.1322606-1-horatiu.vultur@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-18Revert "pinctrl: pinctrl-zynqmp: Add support for output-enable and ↵Sai Krishna Potthuri1-9/+0
bias-high-impedance" This reverts commit ad2bea79ef0144043721d4893eef719c907e2e63. On systems with older PMUFW (Xilinx ZynqMP Platform Management Firmware) using these pinctrl properties can cause system hang because there is missing feature autodetection. When this feature is implemented in the PMUFW, support for these two properties should bring back. Cc: stable@vger.kernel.org Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> Acked-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20221017130303.21746-2-sai.krishna.potthuri@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-17pinctrl: qcom: Avoid glitching lines when we first mux to outputDouglas Anderson1-0/+21
Back in the description of commit e440e30e26dd ("arm64: dts: qcom: sc7180: Avoid glitching SPI CS at bootup on trogdor") we described a problem that we were seeing on trogdor devices. I'll re-summarize here but you can also re-read the original commit. On trogdor devices, the BIOS is setting up the SPI chip select as: - mux special function (SPI chip select) - output enable - output low (unused because we've muxed as special function) In the kernel, however, we've moved away from using the chip select line as special function. Since the kernel wants to fully control the chip select it's far more efficient to treat the line as a GPIO rather than sending packet-like commands to the GENI firmware every time we want the line to toggle. When we transition from how the BIOS had the pin configured to how the kernel has the pin configured we end up glitching the line. That's because we _first_ change the mux of the line and then later set its output. This glitch is bad and can confuse the device on the other end of the line. The old commit e440e30e26dd ("arm64: dts: qcom: sc7180: Avoid glitching SPI CS at bootup on trogdor") fixed the glitch, though the solution was far from elegant. It essentially did the thing that everyone always hates: encoding a sequential program in device tree, even if it's a simple one. It also, unfortunately, got broken by commit b991f8c3622c ("pinctrl: core: Handling pinmux and pinconf separately"). After that commit we did all the muxing _first_ even though the config (set the pin to output high) was listed first. :( I looked at ideas for how to solve this more properly. My first thought was to use the "init" pinctrl state. In theory the "init" pinctrl state is supposed to be exactly for achieving glitch-free transitions. My dream would have been for the "init" pinctrl to do nothing at all. That would let us delay the automatic pin muxing until the driver could set things up and call pinctrl_init_done(). In other words, my dream was: /* Request the GPIO; init it 1 (because DT says GPIO_ACTIVE_LOW) */ devm_gpiod_get_index(dev, "cs", GPIOD_OUT_LOW); /* Output should be right, so we can remux, yay! */ pinctrl_init_done(dev); Unfortunately, it didn't work out. The primary reason is that the MSM GPIO driver implements gpio_request_enable(). As documented in pinmux.h, that function automatically remuxes a line as a GPIO. ...and it does this remuxing _before_ specifying the output of the pin. You can see in gpiod_get_index() that we call gpiod_request() before gpiod_configure_flags(). gpiod_request() isn't passed any flags so it has no idea what the eventual output will be. We could have debates about whether or not the automatic remuxing to GPIO for the MSM pinctrl was a good idea or not, but at this point I think there is a plethora of code that's relying on it and I certainly wouldn't suggest changing it. Alternatively, we could try to come up with a way to pass the initial output state to gpio_request_enable() and plumb all that through. That seems like it would be doable, but we'd have to plumb it through several layers in the stack. This patch implements yet another alternative. Here, we specifically avoid glitching the first time a pin is muxed to GPIO function if the direction of the pin is output. The idea is that we can read the state of the pin before we set the mux and make sure that the re-mux won't change the state. NOTES: - We only do this the first time since later swaps between mux states might want to preserve the old output value. In other words, I wouldn't want to break a driver that did: gpiod_set_value(g, 1); pinctrl_select_state(pinctrl, special_state); pinctrl_select_default_state(); /* We should be driving 1 even if "special_state" made the pin 0 */ - It's safe to do this the first time since the driver _couldn't_ have explicitly set a state. In order to even be able to control the GPIO (at least using gpiod) we have to have requested it which would have counted as the first mux. - In theory, instead of keeping track of the first time a pin was set as a GPIO we could enable the glitch-free behavior only when msm_pinmux_request_gpio() is in the callchain. That works an enables my "dream" implementation above where we use an "init" state to solve this. However, it's nice not to have to do this. By handling just the first transition to GPIO we can simply let the normal "default" remuxing happen and we can be assured that there won't be a glitch. Before this change I could see the glitch reported on the EC console when booting. It would say this when booting the kernel: Unexpected state 1 in CSNRE ISR After this change there is no error reported. Note that I haven't reproduced the original problem described in e440e30e26dd ("arm64: dts: qcom: sc7180: Avoid glitching SPI CS at bootup on trogdor") but I could believe it might happen in certain timing conditions. Fixes: b991f8c3622c ("pinctrl: core: Handling pinmux and pinconf separately") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20221014103217.1.I656bb2c976ed626e5d37294eb252c1cf3be769dc@changeid Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-17pinctrl: Ingenic: JZ4755 bug fixesSiarhei Volkau1-2/+2
Fixes UART1 function bits and MMC groups typo. For pins 0x97,0x99 function 0 is designated to PWM3/PWM5 respectively, function is 1 designated to the UART1. Diff from v1: - sent separately - added tag Fixes Cc: stable@vger.kernel.org Fixes: b582b5a434d3 ("pinctrl: Ingenic: Add pinctrl driver for JZ4755.") Tested-by: Siarhei Volkau <lis8215@gmail.com> Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Link: https://lore.kernel.org/r/20221016153548.3024209-1-lis8215@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-12Merge tag 'irq-core-2022-10-12' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt updates from Thomas Gleixner: "Core code: - Provide a generic wrapper which can be utilized in drivers to handle the problem of force threaded demultiplex interrupts on RT enabled kernels. This avoids conditionals and horrible quirks in drivers all over the place - Fix up affected pinctrl and GPIO drivers to make them cleanly RT safe Interrupt drivers: - A new driver for the FSL MU platform specific MSI implementation - Make irqchip_init() available for pure ACPI based systems - Provide a functional DT binding for the Realtek RTL interrupt chip - The usual DT updates and small code improvements all over the place" * tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) irqchip: IMX_MU_MSI should depend on ARCH_MXC irqchip/imx-mu-msi: Fix wrong register offset for 8ulp irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap dt-bindings: irqchip: Describe the IMX MU block as a MSI controller irqchip: Add IMX MU MSI controller driver dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support irqchip/gic-v3: Fix typo in comment dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END platform-msi: Export symbol platform_msi_create_irq_domain() irqchip/realtek-rtl: use parent interrupts dt-bindings: interrupt-controller: realtek,rtl-intc: require parents irqchip/realtek-rtl: use irq_domain_add_linear() irqchip: Make irqchip_init() usable on pure ACPI systems bcma: gpio: Use generic_handle_irq_safe() gpio: mlxbf2: Use generic_handle_irq_safe() platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe() ssb: gpio: Use generic_handle_irq_safe() pinctrl: amd: Use generic_handle_irq_safe() ...
2022-10-11Merge tag 'pinctrl-v6.1-1' of ↵Linus Torvalds48-764/+6999
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "There is nothing exciting going on, no core changes, just a few drivers and cleanups. New drivers: - Cypress CY8C95x0 chip pin control support, along with an immediate cleanup - Mediatek MT8188 SoC pin control support - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin control support - Qualcomm PM7250, PM8450 - Rockchip RV1126 SoC pin control support Improvements: - Fix some missing pins in the Armada 37xx driver - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP() macro - Fix some GPIO irq_chips to be immutable - Massive Qualcomm device tree binding cleanup, with more to come" * tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits) MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" pinctrl: Create subdirectory for StarFive drivers dt-bindings: pinctrl: st,stm32: Document interrupt-controller property dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property dt-bindings: pinctrl: st,stm32: Document gpio-line-names pinctrl: st: stop abusing of_get_named_gpio() pinctrl: wpcm450: Correct the fwnode_irq_get() return value check pinctrl: bcm: Remove unused struct bcm6328_pingroup pinctrl: qcom: restrict drivers per ARM/ARM64 pinctrl: bcm: ns: Remove redundant dev_err call gpio: rockchip: request GPIO mux to pinctrl when setting direction pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops pinctrl: cy8c95x0: Drop atomicity on operations on push_pull pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux() pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper pinctrl: stm32: Switch to use dev_err_probe() helper dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings pinctrl: qcom: spmi-gpio: Add compatible for PM7250B ...
2022-10-06Merge tag 'arm-drivers-6.1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Arnd Bergmann: "The drivers branch for 6.1 is a bit larger than for most releases. Most of the changes come from SoC maintainers for the drivers/soc subsystem: - A new driver for error handling on the NVIDIA Tegra 'control backbone' bus. - A new driver for Qualcomm LLCC/DDR bandwidth measurement - New Rockchip rv1126 and rk3588 power domain drivers - DT binding updates for memory controllers, older Rockchip SoCs, various Mediatek devices, Qualcomm SCM firmware - Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the Apple rtkit firmware driver, Tegra firmware - Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra, Qualcomm, Broadcom, NXP, ...) There are also some separate subsystem with downstream maintainers that merge updates this way: - Various updates and new drivers in the memory controller subsystem for Mediatek and Broadcom SoCs - Small set of changes in preparation to add support for FF-A v1.1 specification later, in the Arm FF-A firmware subsystem - debugfs support in the PSCI firmware subsystem" * tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits) ARM: remove check for CONFIG_DEBUG_LL_SER3 firmware/psci: Add debugfs support to ease debugging firmware/psci: Print a warning if PSCI doesn't accept PC mode dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support soc: sunxi: sram: Add support for the D1 system control soc: sunxi: sram: Export the LDO control register soc: sunxi: sram: Save a pointer to the OF match data soc: sunxi: sram: Return void from the release function soc: apple: rtkit: Add apple_rtkit_poll soc: imx: add i.MX93 media blk ctrl driver soc: imx: add i.MX93 SRC power domain driver soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl soc: imx: add icc paths for i.MX8MP media blk ctrl ...
2022-10-04pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100"Jianlong Huang3-3/+3
Add the SoC name to make it more clear. Also the next generation StarFive SoCs will use "pinctrl-starfive" as the core of StarFive pinctrl driver. No functional change. Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com> Signed-off-by: Hal Feng <hal.feng@linux.starfivetech.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220930061404.5418-1-hal.feng@linux.starfivetech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-04pinctrl: Create subdirectory for StarFive driversJianlong Huang5-22/+27
Move the StarFive JH7100 pinctrl driver to a new subdirectory in preparation for adding more StarFive pinctrl drivers. No functional change. Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com> Signed-off-by: Hal Feng <hal.feng@linux.starfivetech.com> Link: https://lore.kernel.org/r/20220930060819.5320-1-hal.feng@linux.starfivetech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-04pinctrl: st: stop abusing of_get_named_gpio()Dmitry Torokhov1-4/+30
Pin descriptions for this chip only look like standard GPIO device tree descriptions, while in fact they contain additional data (in excess of number of cells specified in description of gpio controllers). They also refer to only pins/gpios belonging to the driver and not to arbitrary gpio in the system. Because we want to stop exporting OF-specific handlers from gpiolib-of, let's parse the pin reference ourself instead of trying to call of_get_named_gpio(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/YzSsgoVoJn4+mSpv@google.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-04pinctrl: wpcm450: Correct the fwnode_irq_get() return value checkAndy Shevchenko1-1/+4
fwnode_irq_get() can return zero to indicate IRQ mapping errors. Handle this case by skipping the interrupt resource. Fixes: a1d1e0e3d80a ("pinctrl: nuvoton: Add driver for WPCM450") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20220927175509.15695-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-04pinctrl: bcm: Remove unused struct bcm6328_pingroupYuan Can1-6/+0
After commit 0e3db16300fb("pinctrl: bcm: Convert drivers to use struct pingroup and PINCTRL_PINGROUP()"), no one use struct bcm6328_pingroup, so remove it. Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220927133926.103943-1-yuancan@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-04pinctrl: qcom: restrict drivers per ARM/ARM64Krzysztof Kozlowski1-0/+39
There is no point to allow selecting pin-controller drivers for Qualcomm ARMv7 SoCs when building ARM64 kernel, and vice versa. This makes kernel configuration more difficult as many do not remember the Qualcomm SoCs. There won't be a single image for ARMv7 and ARMv8/9 SoCs, so no features/options are lost. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220925112103.148836-1-krzysztof.kozlowski@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-04pinctrl: bcm: ns: Remove redundant dev_err callShang XiaoJing1-3/+1
devm_ioremap_resource() prints error message in itself. Remove the dev_err call to avoid redundant error message. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Ray Jui <ray.jui@broadcom.com> Link: https://lore.kernel.org/r/20220923101038.18036-1-shangxiaojing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-04pinctrl: rockchip: add pinmux_ops.gpio_set_direction callbackQuentin Schulz1-0/+13
Before the split of gpio and pinctrl sections in their own driver, rockchip_set_mux was called in pinmux_ops.gpio_set_direction for configuring a pin in its GPIO function. This is essential for cases where pinctrl is "bypassed" by gpio consumers otherwise the GPIO function is not configured for the pin and it does not work. Such was the case for the sysfs/libgpiod userspace GPIO handling. Let's re-implement the pinmux_ops.gpio_set_direction callback so that the gpio subsystem can request from the pinctrl driver to put the pin in its GPIO function. Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes") Cc: stable@vger.kernel.org Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20220930132033.4003377-2-foss+kernel@0leil.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-20/+103
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-20pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxopsAndy Shevchenko1-6/+6
Align the function names in the cy8c95x0_pmxops() to follow the struct pinmux_ops members naming schema. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220916205450.86278-3-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-20pinctrl: cy8c95x0: Drop atomicity on operations on push_pullAndy Shevchenko1-7/+8
The push_pull member is always accessed under the mutex, hence no need to use atomic operations on it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220916205450.86278-2-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-20pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux()Andy Shevchenko1-1/+6
It seems that cy8c95x0_set_mux() missed serialization of IO access. And its implementation looks half-baked. Add locking to the function. Fixes: e6cbbe42944d ("pinctrl: Add Cypress cy8c95x0 support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220916205450.86278-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-20pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helperYang Yingliang1-6/+3
In the probe path, dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER and and prints the error name. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220917122208.1894769-1-yangyingliang@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-20pinctrl: stm32: Switch to use dev_err_probe() helperYang Yingliang1-3/+2
In the probe path, dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220917122015.1893880-1-yangyingliang@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-19pinctrl: amd: Use generic_handle_irq_safe()Sebastian Andrzej Siewior1-1/+1
On PREEMPT_RT enabled kernels the demultiplex interrupt handler is force threaded and runs with interrupts enabled. The invocation of generic_handle_domain_irq() with interrupts enabled triggers a lockdep warning due to a non-irq safe lock acquisition. Instead of disabling interrupts on the driver level, use generic_handle_domain_irq_safe(). [ tglx: Split out from combo patch ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/YnkfWFzvusFFktSt@linutronix.de Link: https://bugzilla.kernel.org/show_bug.cgi?id=215954
2022-09-19pinctrl: qcom: spmi-gpio: Add compatible for PM7250BJishnu Prakash1-0/+1
Add support for qcom,pm7250b-gpio variant. Signed-off-by: Jishnu Prakash <quic_jprakash@quicinc.com> Signed-off-by: David Collins <quic_collinsd@quicinc.com> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220912210624.4527-4-quic_amelende@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-19pinctrl: qcom: spmi-gpio: Fix the GPIO strength mappingAnjelique Melendez1-2/+25
The SPMI based PMICs have the HIGH and LOW GPIO output strength mappings interchanged, fix them. Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> Link: https://lore.kernel.org/r/20220912210624.4527-3-quic_amelende@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-19pinctrl: qcom: spmi-gpio: add support for LV_VIN2 and MV_VIN3 subtypesDavid Collins1-0/+13
Add support for SPMI PMIC GPIO subtypes GPIO_LV_VIN2 and GPIO_MV_VIN3. GPIO_LV_VIN2 GPIOs support two input reference voltages: VIN0 and VIN1. These are typically connected to 1.8 V and 1.2 V supplies respectively. GPIO_MV_VIN3 GPIOs support three input reference voltages: VIN0, VIN1, and VIN2. These are typically connected to Vph, 1.8 V, and 1.2 V supplies respectively. Signed-off-by: David Collins <quic_collinsd@quicinc.com> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> Link: https://lore.kernel.org/r/20220912210624.4527-2-quic_amelende@quicinc.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-19pinctrl: nomadik: remove dead code after DB8540 pinctrl removalLukas Bulwahn2-20/+0
Commit b6d09f780761 ("pinctrl: nomadik: Drop U8540/9540 support") removes the DB8540 pin controller driver and its config PINCTRL_DB8540. There is some code left-over in the generic nomadik pinctrl driver, i.e., drivers/pinctrl/nomadik/pinctrl-nomadik.{ch}, that is still around for the removed DB8540 pin controller driver. Remove this remaining dead code. This issue was discovered with ./scripts/checkkconfigsymbols.py. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20220919065435.27747-1-lukas.bulwahn@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-19pinctrl: nomadik: Make gpio irqchip immutableLinus Walleij1-24/+35
This makes the Nomadik GPIO irqchip immutable. Tested on the Samsung Galaxy SIII mini GT-I8190. Cc: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220917203036.167607-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-19pinctrl: nomadik: Dereference gpio_chip properlyLinus Walleij1-18/+12
The irq data passed to irc_chip handlers i the struct gpio_chip and nothing else. We are just lucky that the nomadik chip pointer is first in the struct. Use the proper dereferencing and helpers. Reported-by: Marc Zyngier <maz@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220917203036.167607-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-14pinctrl: ocelot: Fix interrupt controllerHoratiu Vultur1-14/+97
When an external device generated a level based interrupt then the interrupt controller could miss the interrupt. The reason is that the interrupt controller can detect only link changes. In the following example, if there is a PHY that generates an interrupt then the following would happen. The GPIO detected that the interrupt line changed, and then the 'ocelot_irq_handler' was called. Here it detects which GPIO line saw the change and for that will call the following: 1. irq_mask 2. phy interrupt routine 3. irq_eoi 4. irq_unmask And this works fine for simple cases, but if the PHY generates many interrupts, for example when doing PTP timestamping, then the following could happen. Again the function 'ocelot_irq_handler' will be called and then from here the following could happen: 1. irq_mask 2. phy interrupt routine 3. irq_eoi 4. irq_unmask Right before step 3(irq_eoi), the PHY will generate another interrupt. Now the interrupt controller will acknowledge the change in the interrupt line. So we miss the interrupt. A solution will be to use 'handle_level_irq' instead of 'handle_fasteoi_irq', because for this will change routine order of handling the interrupt. 1. irq_mask 2. irq_ack 3. phy interrupt routine 4. irq_unmask And now if the PHY will generate a new interrupt before irq_unmask, the interrupt controller will detect this because it already acknowledge the change in interrupt line at step 2(irq_ack). But this is not the full solution because there is another issue. In case there are 2 PHYs that share the interrupt line. For example phy1 generates an interrupt, then the following can happen: 1.irq_mask 2.irq_ack 3.phy0 interrupt routine 4.phy1 interrupt routine 5.irq_unmask In case phy0 will generate an interrupt while clearing the interrupt source in phy1, then the interrupt line will be kept down by phy0. So the interrupt controller will not see any changes in the interrupt line. The solution here is to update 'irq_unmask' such that it can detect if the interrupt line is still active or not. And if it is active then call again the procedure to clear the interrupts. But we don't want to do it every time, only if we know that the interrupt controller has not seen already that the interrupt line has changed. While at this, add support also for IRQ_TYPE_LEVEL_LOW. Fixes: be36abb71d878f ("pinctrl: ocelot: add support for interrupt controller") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220909145942.844102-1-horatiu.vultur@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-14Merge tag 'samsung-pinctrl-6.1' of ↵Linus Walleij1-4/+4
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel Samsung pinctrl drivers changes for v6.1 1. Minor fix in order of initializing pinctrl driver - GPIOs should be configured before registering gpiolib. 2. Final steps to deprecated bindings headers with register constants. The constants were moved to include files in DTS directories, because these are not suitable for bindings. Remove final references and mark binding header as deprecated to warn any users.
2022-09-14pinctrl: ocelot: add help and description information to ocelot pinctrl kconfigColin Foster2-0/+7
Add missed help information and module export name to the Microsemi Ocelot and Jaguar2 SoC. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Link: https://lore.kernel.org/r/20220909153802.3370088-1-colin.foster@in-advantage.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-09pinctrl: cy8c95x0: Use 'default' in all switch-cases (part 2)Andy Shevchenko1-2/+2
Move the default values to the 'default' case in the switches. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220908142134.59068-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-09pinctrl: microchip-sgpio: add ability to be used in a non-mmio configurationColin Foster1-6/+2
There are a few Ocelot chips that can contain SGPIO logic, but can be controlled externally. Specifically the VSC7511, 7512, 7513, and 7514. In the externally controlled configurations these registers are not memory-mapped. Add support for these non-memory-mapped configurations. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220905162132.2943088-6-colin.foster@in-advantage.com
2022-09-09pinctrl: microchip-sgpio: allow sgpio driver to be used as a moduleColin Foster2-2/+9
As the commit message suggests, this simply adds the ability to select SGPIO pinctrl as a module. This becomes more practical when the SGPIO hardware exists on an external chip, controlled indirectly by I2C or SPI. This commit enables that level of control. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220905162132.2943088-5-colin.foster@in-advantage.com
2022-09-09pinctrl: ocelot: add ability to be used in a non-mmio configurationColin Foster1-11/+5
There are a few Ocelot chips that contain pinctrl logic, but can be controlled externally. Specifically the VSC7511, 7512, 7513 and 7514. In the externally controlled configurations these registers are not memory-mapped. Add support for these non-memory-mapped configurations. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220905162132.2943088-4-colin.foster@in-advantage.com
2022-09-08pinctrl: pistachio: Correct the fwnode_irq_get() return value checkAndy Shevchenko1-0/+6
fwnode_irq_get() may return all possible signed values, such as Linux error code or 0. Fix the code to handle this properly. Fixes: 1074e1d23a5c ("pinctrl: pistachio: Switch to use fwnode instead of") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220908094323.31965-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-08pinctrl: qcom: spmi-gpio: Make irqchip immutableManivannan Sadhasivam1-10/+28
The irqchip implementation used inside the gpiochips are not supposed to be changed during runtime. So let's make the one inside the spmi-gpio gpiochip immutable. This fixes the below warning during boot: gpio gpiochip0: (c440000.spmi:pmic@0:gpio@c000): not an immutable chip, please consider fixing it! Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220830092232.168561-1-manivannan.sadhasivam@linaro.org [switched two lines as indicated by Johan] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-08pinctrl: meson: Switch to use fwnode instead of of_nodeAndy Shevchenko2-5/+6
GPIO library now accepts fwnode as a firmware node, so switch the driver to use it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220905180034.73132-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-08pinctrl: microchip-sgpio: Correct the fwnode_irq_get() return value checkAndy Shevchenko1-2/+3
fwnode_irq_get() may return all possible signed values, such as Linux error code. Fix the code to handle this properly. Fixes: be2dc859abd4 ("pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220906115021.8661-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-08pinctrl: ingenic: Switch to use fwnode instead of of_nodeAndy Shevchenko1-14/+17
GPIO library now accepts fwnode as a firmware node, so switch the driver to use it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220905185102.74056-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-08pinctrl: imx8m: kconfig: Fix build error on test compileFrancesco Dolcini1-0/+4
PINCTRL_IMX depends on OF, however the dependency is missed when selected by PINCTRL_IMX8M* (it does not follow the indirect 'select' statements), select it explicitly. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/all/202209050605.fezJUgFH-lkp@intel.com/ Fixes: 87c2a29a6bf1 ("pinctrl: imx8m: kconfig: Depends on SOC_IMX8M") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Link: https://lore.kernel.org/r/20220905224408.346425-1-francesco.dolcini@toradex.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>