summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)AuthorFilesLines
2019-07-21pinctrl: mediatek: Update cur_mask in mask/mask opsNicolas Boichat1-14/+4
[ Upstream commit 9d957a959bc8c3dfe37572ac8e99affb5a885965 ] During suspend/resume, mtk_eint_mask may be called while wake_mask is active. For example, this happens if a wake-source with an active interrupt handler wakes the system: irq/pm.c:irq_pm_check_wakeup would disable the interrupt, so that it can be handled later on in the resume flow. However, this may happen before mtk_eint_do_resume is called: in this case, wake_mask is loaded, and cur_mask is restored from an older copy, re-enabling the interrupt, and causing an interrupt storm (especially for level interrupts). Step by step, for a line that has both wake and interrupt enabled: 1. cur_mask[irq] = 1; wake_mask[irq] = 1; EINT_EN[irq] = 1 (interrupt enabled at hardware level) 2. System suspends, resumes due to that line (at this stage EINT_EN == wake_mask) 3. irq_pm_check_wakeup is called, and disables the interrupt => EINT_EN[irq] = 0, but we still have cur_mask[irq] = 1 4. mtk_eint_do_resume is called, and restores EINT_EN = cur_mask, so it reenables EINT_EN[irq] = 1 => interrupt storm as the driver is not yet ready to handle the interrupt. This patch fixes the issue in step 3, by recording all mask/unmask changes in cur_mask. This also avoids the need to read the current mask in eint_do_suspend, and we can remove mtk_eint_chip_read_mask function. The interrupt will be re-enabled properly later on, sometimes after mtk_eint_do_resume, when the driver is ready to handle it. Fixes: 58a5e1b64bb0 ("pinctrl: mediatek: Implement wake handler and suspend resume") Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-21pinctrl: mediatek: Ignore interrupts that are wake only during resumeNicolas Boichat1-1/+15
[ Upstream commit 35594bc7cecf3a78504b590e350570e8f4d7779e ] Before suspending, mtk-eint would set the interrupt mask to the one in wake_mask. However, some of these interrupts may not have a corresponding interrupt handler, or the interrupt may be disabled. On resume, the eint irq handler would trigger nevertheless, and irq/pm.c:irq_pm_check_wakeup would be called, which would try to call irq_disable. However, if the interrupt is not enabled (irqd_irq_disabled(&desc->irq_data) is true), the call does nothing, and the interrupt is left enabled in the eint driver. Especially for level-sensitive interrupts, this will lead to an interrupt storm on resume. If we detect that an interrupt is only in wake_mask, but not in cur_mask, we can just mask it out immediately (as mtk_eint_resume would do anyway at a later stage in the resume sequence, when restoring cur_mask). Fixes: bf22ff45bed6 ("genirq: Avoid unnecessary low level irq function calls") Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-21pinctrl: ocelot: fix pinmuxing for pins after 31Alexandre Belloni1-7/+9
[ Upstream commit 4b36082e2e09c2769710756390d54cfca563ed96 ] The actual layout for OCELOT_GPIO_ALT[01] when there are more than 32 pins is interleaved, i.e. OCELOT_GPIO_ALT0[0], OCELOT_GPIO_ALT1[0], OCELOT_GPIO_ALT0[1], OCELOT_GPIO_ALT1[1]. Introduce a new REG_ALT macro to facilitate the register offset calculation and use it where necessary. Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-21pinctrl: ocelot: fix gpio direction for pins after 31Alexandre Belloni1-1/+1
[ Upstream commit f2818ba3a0125670cb9999bb5a65ebb631a8da2f ] The third argument passed to REG is not the correct one and ocelot_gpio_set_direction is not working for pins after 31. Fix that by passing the pin number instead of the modulo 32 value. Fixes: da801ab56ad8 pinctrl: ocelot: add MSCC Jaguar2 support Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-21pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call orderPhil Reid1-4/+4
[ Upstream commit 6dbc6e6f58556369bf999cd7d9793586f1b0e4b4 ] Currently probing of the mcp23s08 results in an error message "detected irqchip that is shared with multiple gpiochips: please fix the driver" This is due to the following: Call to mcp23s08_irqchip_setup() with call hierarchy: mcp23s08_irqchip_setup() gpiochip_irqchip_add_nested() gpiochip_irqchip_add_key() gpiochip_set_irq_hooks() Call to devm_gpiochip_add_data() with call hierarchy: devm_gpiochip_add_data() gpiochip_add_data_with_key() gpiochip_add_irqchip() gpiochip_set_irq_hooks() The gpiochip_add_irqchip() returns immediately if there isn't a irqchip but we added a irqchip due to the previous mcp23s08_irqchip_setup() call. So it calls gpiochip_set_irq_hooks() a second time. Fix this by moving the call to devm_gpiochip_add_data before the call to mcp23s08_irqchip_setup Fixes: 02e389e63e35 ("pinctrl: mcp23s08: fix irq setup order") Suggested-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-22pinctrl: intel: Clear interrupt status in mask/unmask callbackKai-Heng Feng1-31/+6
[ Upstream commit 670784fb4ebe54434e263837390e358405031d9e ] Commit a939bb57cd47 ("pinctrl: intel: implement gpio_irq_enable") was added because clearing interrupt status bit is required to avoid unexpected behavior. Turns out the unmask callback also needs the fix, which can solve weird IRQ triggering issues on I2C touchpad ELAN1200. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-15pinctrl: pinctrl-intel: move gpio suspend/resume to noirq phaseBinbin Wu2-9/+10
[ Upstream commit 2fef32766861c6e171f436ab99c89198cf0ca6e1 ] In current driver, SET_LATE_SYSTEM_SLEEP_PM_OPS is used to install the callbacks for suspend/resume. GPIO pin may be used as the interrupt pin by some device. However, using SET_LATE_SYSTEM_SLEEP_PM_OPS() to install the callbacks, the resume callback is called after resume_device_irqs(). Unintended interrupts may arrive due to resuming device irqs first, but the GPIO controller is not properly restored. Normally, for a SMP system, there are multiple cores, so even when there are unintended interrupts, BSP gets the chance to initialize the GPIO chip soon. But when there is only 1 core is active (other cores are offlined or single core) during resume, it is more easily to observe the unintended interrupts. This patch renames the suspend/resume function by adding suffix "_noirq", and installs the callbacks using SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(). Signed-off-by: Binbin Wu <binbin.wu@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31pinctrl: samsung: fix leaked of_node referencesWen Yang1-0/+1
[ Upstream commit 44b9f86cd41db6c522effa5aec251d664a52fbc0 ] The call to of_find_compatible_node returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:76:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function. ./drivers/pinctrl/samsung/pinctrl-exynos-arm.c:82:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 66, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: linux-samsung-soc@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31pinctrl: st: fix leaked of_node referencesWen Yang1-5/+10
[ Upstream commit 483d70d73beaecab55882fcd2a357af72674e24c ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pinctrl/pinctrl-st.c:1188:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function. ./drivers/pinctrl/pinctrl-st.c:1188:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function. ./drivers/pinctrl/pinctrl-st.c:1199:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function. ./drivers/pinctrl/pinctrl-st.c:1199:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1175, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org (open list) Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31pinctrl: pistachio: fix leaked of_node referencesWen Yang1-0/+2
[ Upstream commit 44a4455ac2c6b0981eace683a2b6eccf47689022 ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pinctrl/pinctrl-pistachio.c:1422:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1360, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31pinctrl: zte: fix leaked of_node referencesWen Yang1-0/+1
[ Upstream commit 02d15f0d80720545f1f4922a1550ea4aaad4e152 ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pinctrl/zte/pinctrl-zx.c:415:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:422:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:436:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:444:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. ./drivers/pinctrl/zte/pinctrl-zx.c:448:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 407, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jun Nie <jun.nie@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-11Merge tag 'pinctrl-v5.1-1' of ↵Linus Torvalds46-801/+2274
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is a calm cycle, not much happened this time around: not even much incremental development. Some three new drivers, that is all. No core changes. New drivers: - NXP (ex Freescale) i.MX 8QM driver. - NXP (ex Freescale) i.MX 8MM driver. - AT91 SAM9X60 subdriver. Improvements: - Support for external interrups (EINT) on Mediatek virtual GPIOs. - Make BCM2835 pin config fully generic. - Lots of Renesas SH-PFC incremental improvements" * tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits) pinctrl: imx: fix scu link errors dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding pinctrl: qcom: spmi-gpio: Reorder debug print pinctrl: nomadik: fix possible object reference leak pinctrl: stm32: return error upon hwspinlock failure pinctrl: stm32: fix memory leak issue pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions pinctrl: sh-pfc: Validate fixed-size field widths at build time pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group pinctrl: sh-pfc: emev2: Add missing pinmux functions pinctrl: sunxi: Support I/O bias voltage setting on A80 pinctrl: ingenic: Add LCD pins for the JZ4725B SoC pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl pinctrl: bcm2835: declare pin config as generic pinctrl: qcom: qcs404: Drop unused UFS_RESET macro dt-bindings: add documentation for slew rate ...
2019-03-08Merge tag 'gpio-v5.1-1' of ↵Linus Torvalds3-50/+250
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.1 cycle: Core changes: - The big change this time around is the irqchip handling in the qualcomm pin controllers, closely coupled with the gpiochip. This rework, in a classic fall-between-the-chairs fashion has been sidestepped for too long. The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms have been rewritten to use hierarchical irqchip. This creates the base from which I intend to gradually pull support for hierarchical irqchips into the gpiolib irqchip helpers to cut down on duplicate code. We have too many hacks in the kernel because people have been working around the missing hierarchical irqchip for years, and once it was there, noone understood it for a while. We are now slowly adapting to using it. This is why this pull requests include changes to MFD, SPMI, IRQchip core and some ARM Device Trees pertaining to the Qualcomm chip family. Since Qualcomm have so many chips and such large deployments it is paramount that this platform gets this right, and now it (hopefully) does. - Core support for pull-up and pull-down configuration, also from the device tree. When a simple GPIO chip supports an "off or on" pull-up or pull-down resistor, we provide a way to set this up using machine descriptors or device tree. If more elaborate control of pull up/down (such as resistance shunt setting) is required, drivers should be phased over to use pin control. We do not yet provide a userspace ABI for this pull up-down setting but I suspect the makers are going to ask for it soon enough. PCA953x is the first user of this new API. - The GPIO mockup driver has been revamped after some discussion improving the IRQ simulator in the process. The idea is to make it possible to use the mockup for both testing and virtual prototyping, e.g. when you do not yet have a GPIO expander to play with but really want to get something to develop code around before hardware is available. It's neat. The blackbox testing usecase is currently making its way into kernelci. - ACPI GPIO core preserves non direction flags when updating flags. - A new device core helper for devm_platform_ioremap_resource() is funneled through the GPIO tree with Greg's ACK. New drivers: - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O) - Gateworks PLD GPIO driver (vaccumed up from OpenWrt) - AMD G-Series PCH (Platform Controller Hub) GPIO driver. - Fintek F81804 & F81966 subvariants. - PCA953x now supports NXP PCAL6416. Driver improvements: - IRQ support on the Nintendo Wii (Hollywood) GPIO. - get_direction() support for the MVEBU driver. - Set the right output level on SAMA5D2. - Drop the unused irq trigger setting on the Spreadtrum driver. - Wakeup support for PCA953x. - A slew of cleanups in the various Intel drivers" * tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits) gpio: gpio-omap: fix level interrupt idling gpio: amd-fch: Set proper output level for direction_output x86: apuv2: remove unused variable gpio: pca953x: Use PCA_LATCH_INT platform/x86: fix PCENGINES_APU2 Kconfig warning gpio: pca953x: Fix dereference of irq data in shutdown gpio: amd-fch: Fix type error found by sparse gpio: amd-fch: Drop const from resource gpio: mxc: add check to return defer probe if clock tree NOT ready gpio: ftgpio: Register per-instance irqchip gpio: ixp4xx: Add DT bindings x86: pcengines apuv2 gpio/leds/keys platform driver gpio: AMD G-Series PCH gpio driver drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource() gpio: tqmx86: Set proper output level for direction_output gpio: sprd: Change to use SoC compatible string gpio: sprd: Use SoC compatible string instead of wildcard string gpio: of: Handle both enable-gpio{,s} gpio: of: Restrict enable-gpio quirk to regulator-gpio gpio: davinci: use devm_platform_ioremap_resource() ...
2019-03-08pinctrl: imx: fix scu link errorsAnders Roxell1-2/+2
Currently PINCTRL_IMX8QM and PINCTRL_IMX8QXP will select PINCTRL_IMX_SCU. However, PINCTRL_IMX_SCU may not be valid due to it depends on IMX_MBOX. Then we may meet the following link errors: ld: drivers/pinctrl/freescale/pinctrl-scu.o: in function `imx_pinctrl_sc_ipc_init': pinctrl-scu.c:(.text+0x10): undefined reference to `imx_scu_get_handle' ld: pinctrl-scu.c:(.text+0x10): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `imx_scu_get_handle' ld: drivers/pinctrl/freescale/pinctrl-scu.o: in function `imx_pinconf_get_scu': pinctrl-scu.c:(.text+0xa0): undefined reference to `imx_scu_call_rpc' ld: pinctrl-scu.c:(.text+0xa0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `imx_scu_call_rpc' ld: drivers/pinctrl/freescale/pinctrl-scu.o: in function `imx_pinconf_set_scu': pinctrl-scu.c:(.text+0x1b4): undefined reference to `imx_scu_call_rpc' ld: pinctrl-scu.c:(.text+0x1b4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `imx_scu_call_rpc' ld: drivers/pinctrl/freescale/pinctrl-imx8qxp.o: in function `imx8qxp_pinctrl_probe': pinctrl-imx8qxp.c:(.text+0x28): undefined reference to `imx_pinctrl_probe' ld: pinctrl-imx8qxp.c:(.text+0x28): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `imx_pinctrl_probe' Rework so that PINCTRL_IMX8QM and PINCTRL_IMX8QXP depends on IMX_SCU as well in case they're wrongly enabled. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-21pinctrl: qcom: spmi-gpio: Reorder debug printBjorn Andersson1-1/+1
It's reasonable to expect that people turn to the "gpio" debugfs file to first and foremost learn about the direction and value of a gpio, and second to that about it's pinconf. So reorder the value so each line reads: gpioN: direction value ... This also makes it consistent with the TLMM pinctrl driver's output in the same dump. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-21Merge branch 'ib-qcom-ssbi' into develLinus Walleij2-26/+132
2019-02-20pinctrl: nomadik: fix possible object reference leakWangBo1-4/+13
The of_find_device_by_node takes a reference to the struct device when find the match device ,we should release it when fail. Signed-off-by: WangBo <wang.bo116@zte.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-20pinctrl: stm32: return error upon hwspinlock failureAlexandre Torgue1-20/+24
Return error to the caller when the hwspinlock can't get locked. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-20pinctrl: stm32: fix memory leak issueAlexandre Torgue1-10/+16
configs is allocated by pinconf_generic_parse_dt_config(), pinctrl_utils_add_map_configs() duplicates configs so it can and has to be freed to prevent memory leaks. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-18pinctrl: meson: meson8b: fix the sdxc_a data 1..3 pinsMartin Blumenstingl1-1/+1
Fix the mismatch between the "sdxc_d13_1_a" pin group definition from meson8b_cbus_groups and the entry in sdxc_a_groups ("sdxc_d0_13_1_a"). This makes it possible to use "sdxc_d13_1_a" in device-tree files to route the MMC data 1..3 pins to GPIOX_1..3. Fixes: 0fefcb6876d0d6 ("pinctrl: Add support for Meson8b") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-17Merge tag 'gpio-v5.1-updates-for-linus' of ↵Linus Walleij6-29/+37
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into devel gpio updates for v5.1 - support for a new variant of pca953x - documentation fix from Wolfram - some tegra186 name changes - two minor fixes for madera and altera-a10sr
2019-02-14qcom: ssbi-gpio: correct boundary conditions in pm8xxx_domain_translateBrian Masney1-1/+2
SSBI GPIOs are numbered 1..ngpio, so the boundary check in pm8xxx_domain_translate() is off by one. This patch corrects that check. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-13Merge tag 'sh-pfc-for-v5.1-tag2' of ↵Linus Walleij7-5/+677
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v5.1 (take two) - Add DRIF (digital radio) pin groups on R-Car E3 and M3-N, - Add TMU (timer) pin groups on R-Car M3-N, - Miscellaneous fixes, - Build-time validation for fixed-size field width mismatches.
2019-02-13qcom: ssbi-gpio: add support for hierarchical IRQ chipBrian Masney2-12/+124
ssbi-gpio did not have any irqchip support so consumers of this in device tree would need to call gpio[d]_to_irq() in order to get the proper IRQ on the underlying PMIC. IRQ chips in device tree should be usable from the start without the consumer having to make an additional call to get the proper IRQ on the parent. This patch adds hierarchical IRQ chip support to the ssbi-gpio code to correct this issue. The constant PM8XXX_GPIO_PHYSICAL_OFFSET is introduced to replace the hardcoded '1' that previously existed in two places in this driver to improve code readability. This change was tested on an APQ8060 DragonBoard. Signed-off-by: Brian Masney <masneyb@onstation.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-13pinctrl: qcom: ssbi-gpio: hardcode IRQ countsBrian Masney1-14/+7
The probing of this driver calls platform_irq_count, which will setup all of the IRQs that are configured in device tree. In preparation for converting this driver to be a hierarchical IRQ chip, hardcode the IRQ count based on the hardware type so that all the IRQs are not configured immediately and are configured on an as-needed basis later in the boot process. This change will also allow for the removal of the interrupts property later in this patch series once the hierarchical IRQ chip support is in. This patch also removes the generic qcom,ssbi-gpio OF match since we don't know the number of pins. All of the existing upstream bindings already include the more-specific binding. This change was tested on an APQ8060 DragonBoard. Signed-off-by: Brian Masney <masneyb@onstation.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-13qcom: spmi-gpio: Fix boundary conditions IRQ domain translateBjorn Andersson1-1/+2
GPIOs on the SPMI PMIC are numbered 1..ngpio, so the boundary check in pmic_gpio_domain_translate() is off by one, correct this. Fixes: ca69e2d165eb ("qcom: spmi-gpio: add support for hierarchical IRQ chip") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-11pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functionsTakeshi Kihara1-0/+350
This patch adds DRIF{0,1,2,3} pins, groups and functions to the R8A77965 SoC. Based on a similar patch of the R8A7796 PFC driver by Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-11pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functionsTakeshi Kihara1-0/+48
This patch adds TMU TCLK{1,2} pins, groups and functions to the R8A77965 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-11pinctrl: sh-pfc: Validate fixed-size field widths at build timeGeert Uytterhoeven1-1/+2
Add a build-time check, to ensure the register and field widths in descriptors for config registers with fixed-width fields are sane. This helps catching bugs early. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groupsGeert Uytterhoeven1-1/+2
There are two pin groups for the FSIC SPDIF signal, but the FSIC pin group array lists only one, and it refers to a nonexistent group. Fixes: 2ecd4154c906b7d6 ("sh-pfc: sh73a0: Add FSI pin groups and functions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin groupGeert Uytterhoeven1-0/+1
The vin1_data18_b pin group itself is present, but it is not listed in the VIN1 pin group array, and thus cannot be selected. Fixes: 7dd74bb1f058786e ("pinctrl: sh-pfc: r8a7792: Add VIN pin groups") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin groupGeert Uytterhoeven1-1/+1
The entry for "scifb2_data_c" in the SCIFB2 pin group array contains a typo, thus the group cannot be selected. Fixes: 5088451962389924 ("pinctrl: sh-pfc: r8a7791 PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11pinctrl: sh-pfc: emev2: Add missing pinmux functionsGeert Uytterhoeven1-0/+20
The err_rst_reqb, ext_clki, lowpwr, and ref_clko pin groups are present, but no pinmux functions refer to them, hence they can not be selected. Fixes: 1e7d5d849cf4f0c5 ("sh-pfc: Add emev2 pinmux support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11pinctrl: sunxi: Support I/O bias voltage setting on A80Chen-Yu Tsai4-0/+55
The A80 SoC has configuration registers for I/O bias voltage. Incorrect settings would make the affected peripherals inoperable in some cases, such as Ethernet RGMII signals biased at 2.5V with the settings still at 3.3V. However low speed signals such as MDIO on the same group of pins seem to be unaffected. Previously there was no way to know what the actual voltage used was, short of hard-coding a value in the device tree. With the new pin bank regulator supply support in place, the driver can now query the regulator for its voltage, and if it's valid (as opposed to being the dummy regulator), set the bias voltage setting accordingly. Add a quirk to denote the presence of the configuration registers, and a function to set the correct setting based on the voltage read back from the regulator. This is only done when the regulator is first acquired and enabled. While it would be nice to have a notifier on the regulator so that when the voltage changes, the driver can update the setting, in practice no board currently supports dynamic changing of the I/O voltages. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-11Merge tag 'v5.0-rc6' into develLinus Walleij6-29/+37
Linux 5.0-rc6
2019-02-11pinctrl: qcom: qcs404: Correct SDC tileBjorn Andersson1-1/+1
The SDC controls live in the south tile, not the north one. Correct this so that we program the right registers. Cc: stable@vger.kernel.org Fixes: 22eb8301dbc1 ("pinctrl: qcom: Add qcs404 pinctrl driver") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: ingenic: Add LCD pins for the JZ4725B SoCPaul Cercueil1-0/+30
Add the pins and groups for the "lcd" pin function in the JZ4725B SoC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: samsung: Remove legacy API for handling external wakeup interrupts maskKrzysztof Kozlowski1-10/+2
Remove the legacy, ugly API of exposing the static value of external wakeup interrupts mask, because all arch-machine users where converted to use generic implementation from pinctrl driver. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Sylwester Nawrocki <snawrocki@kernel.org> Acked-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: bcm2835: Direct GPIO config changes to generic pinctrlStefan Wahren1-1/+2
In order to support GPIO config changes direct these to the generic pinctrl. This also requires an adjust of the return code for unsupported parameter otherwise gpiod_configure_flags wont work as expected. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: bcm2835: declare pin config as genericStefan Wahren1-0/+1
Since commit 0de704955ee44 ("pinctrl: bcm2835: Add support for generic pinctrl binding") this driver is capable to use the generic interface. So declare this accordingly. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: qcom: qcs404: Drop unused UFS_RESET macroBjorn Andersson1-25/+0
The UFS_RESET macro serves no purpose on QCS404, remove it. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: at91: add slewrate support for SAM9X60Claudiu Beznea2-0/+49
Add slew rate support for SAM9X60 pin controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: at91: add compatibles for SAM9X60 pin controllerClaudiu Beznea1-0/+2
Add compatibles for SAM9X60 pin controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: at91: add drive strength support for SAM9X60Claudiu Beznea2-0/+54
Add drive strength support for SAM9X60 pin controller. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-08pinctrl: at91: add option to use drive strength bitsClaudiu Beznea1-12/+20
SAM9X60 uses high and low drive strengths. To implement this, in at91_pinctrl_mux_ops::set_drivestrength and at91_pinctrl_mux_ops::get_drivestrength we need bit numbers of drive strengths (1 for low, 2 for high), thus change the code to allow the usage of drive strength bit numbers. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-05pinctrl: sh-pfc: r8a77990: Add DRIF pins, groups and functionsTakeshi Kihara1-2/+253
This patch adds DRIF{0,1,2,3} pins, groups and functions to the R8A77990 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-04pinctrl: qcom: spmi-gpio: select IRQ_DOMAIN_HIERARCHY in KconfigBrian Masney1-0/+1
Select IRQ_DOMAIN_HIERARCHY for spmi-gpio in Kconfig since this driver is now setup as a hierarchical IRQ chip. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-30pinctrl: freescale: Add imx8mm pinctrl driver supportBai Ping3-0/+356
Add the pinctrl driver support for i.MX8MM. Signed-off-by: Bai Ping <ping.bai@nxp.com> Acked-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-30Pinctrl: Ingenic: Unify the function name prefix to "ingenic_gpio_".Zhou Yanjie1-23/+23
In the original code, some function names begin with "ingenic_gpio_", and some with "gpio_ingenic_". For the sake of uniform style, all of them are changed to the beginning of "ingenic_gpio_". Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-30Pinctrl: Ingenic: Add missing parts for JZ4770 and JZ4780.Zhou Yanjie1-2/+44
Add mmc2 for JZ4770 and JZ4780: According to the datasheet, both JZ4770 and JZ4780 have mmc2. But this part of the original code is missing. It is worth noting that JZ4770's mmc2 supports 8bit mode while JZ4780's does not, so we added the corresponding code for both models. Add nemc-wait for JZ4770 and JZ4780: Both JZ4770 and JZ4780 have a nemc-wait pin. But this part of the original code is missing. Add mac for JZ4770: JZ4770 have a mac. But this part of the original code is missing. Signed-off-by: Zhou Yanjie <zhouyanjie@cduestc.edu.cn> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-23 10:05:38 +0300