summaryrefslogtreecommitdiff
path: root/drivers/platform/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2022-10-12LoongArch: Add ACPI-based generic laptop driverJianmin Lv1-0/+1
This add ACPI-based generic laptop driver for Loongson-3. Some of the codes are derived from drivers/platform/x86/thinkpad_acpi.c. Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2020-10-27platform: Add Surface platform directoryMaximilian Luz1-0/+1
It may make sense to split the Microsoft Surface hardware platform drivers out to a separate subdirectory, since some of it may be shared between ARM and x86 in the future (regarding devices like the Surface Pro X). Further, newer Surface devices will require additional platform drivers for fundamental support (mostly regarding their embedded controller), which may also warrant this split from a size perspective. This commit introduces a new platform/surface subdirectory for the Surface device family, with subsequent commits moving existing Surface drivers over from platform/x86. A new MAINTAINERS entry is added for this directory. Patches to files in this directory will be taken up by the platform-drivers-x86 team (i.e. Hans de Goede and Mark Gross) after they have been reviewed by Maximilian Luz. Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20201009141128.683254-2-luzmaximilian@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2019-05-20Platform: OLPC: Add XO-1.75 EC driverLubomir Rintel1-1/+1
It's based off the driver from the OLPC kernel sources. Somewhat modernized and cleaned up, for better or worse. Modified to plug into the olpc-ec driver infrastructure (so that battery interface and debugfs could be reused) and the SPI slave framework. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-01-31platform/x86: Move Mellanox platform hotplug driver to platform/mellanoxVadim Pasternak1-0/+1
In preparation for making the hotplug driver build for different architectures, move mlxcpld-hotplug.c to platform/mellanox and the header to include/linux/platform_data as mlxreg.h to reflect the new interface changes to come. Replace references to CPLD with REG throughout the files, consistent with the new name. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> [dvhart: update copyright, rewrite commit message] Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-01MIPS: Loongson-3: Add CPU Hwmon platform driverHuacai Chen1-0/+1
This add CPU Hwmon (temperature sensor) platform driver for Loongson-3. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/9617/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-11-21platform: add chrome platform directoryOlof Johansson1-0/+1
It makes sense to split out the Chromebook/Chromebox hardware platform drivers to a separate subdirectory, since some of it will be shared between ARM and x86. This moves over the existing chromeos_laptop driver without making any other changes, and adds appropriate Kconfig entries for the new directory. It also adds a MAINTAINERS entry for the new subdir. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-01-25goldfish: add the goldfish virtual busJun Nakajima1-0/+1
This imports the current Google code and cleans it up slightly to use pr_ and to properly request its resources. Goldfish is an emulator used for Android development. It has a virtual bus where the emulator passes platform device information to the guest which then creates the appropriate devices. This part of the emulation is not architecture specific so should not be hiding in architecture trees as it does in the Google Android tree. The constants it uses do depend on the platform and the platform creates the bus device which then talks to the emulator to ascertain the actual devices present. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com> Signed-off-by: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by: Bruce Beare <bruce.j.beare@intel.com> [Moved out of x86, cleaned up headers] Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-01Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driverAndres Salomon1-0/+1
The OLPC EC driver has outgrown arch/x86/platform/. It's time to both share common code amongst different architectures, as well as move it out of arch/x86/. The XO-1.75 is ARM-based, and the EC driver shares a lot of code with the x86 code. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2008-12-19create drivers/platform/x86/ from drivers/misc/Len Brown1-0/+5
Move x86 platform specific drivers from drivers/misc/ to a new home under drivers/platform/x86/. The community has been maintaining x86 vendor-specific platform specific drivers under /drivers/misc/ for a few years. The oldest ones started life under drivers/acpi. They moved out of drivers/acpi/ because they don't actually implement the ACPI specification, but either simply use ACPI, or implement vendor-specific ACPI extensions. In the future we anticipate... drivers/misc/ will go away. other architectures will create drivers/platform/<arch> Signed-off-by: Len Brown <len.brown@intel.com>