Age | Commit message (Collapse) | Author | Files | Lines |
|
Add a new driver for the power-, wake- and reset-source functionality
of the Bay Trail (BYT) version of the Crystal Cove PMIC.
The main functionality here is detecting which power-sources (USB /
DC in / battery) are active. This is normally exposed to userspace as
a power_supply class charger device with an online sysfs attribute.
But if a charger is online or not is already exposed on BYT-CRC devices
through either an ACPI AC power_supply device, or through a native driver
for the battery charger chip (e.g. a BQ24292i).
So instead of adding duplicate info under the power_supply class this
driver exports the info through debugfs and likewise adds debugfs files
for the reset- and wake-source info / registers.
Despite this driver only exporting debugfs bits it is still useful to
have this driver because it clears the wake- and reset-source registers
after reading them. Not clearing these can have undesirable side-effects.
Specifically if the WAKESRC register contains 0x01 (wake by powerbutton)
on reboot then the firmware on some tablets turns the reboot into
a poweroff. I guess this may be necessary to make long power-presses turn
into a poweroff somehow?
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230303221928.285477-1-hdegoede@redhat.com
|
|
The TPMI (Topology Aware Register and PM Capsule Interface) provides a
flexible, extendable and PCIe enumerable MMIO interface for PM features.
For example Intel RAPL (Running Average Power Limit) provides a MMIO
interface using TPMI. This has advantage over traditional MSR
(Model Specific Register) interface, where a thread needs to be scheduled
on the target CPU to read or write. Also the RAPL features vary between
CPU models, and hence lot of model specific code. Here TPMI provides an
architectural interface by providing hierarchical tables and fields,
which will not need any model specific implementation.
The TPMI interface uses a PCI VSEC structure to expose the location of
MMIO region.
This VSEC structure is present in the PCI configuration space of the
Intel Out-of-Band (OOB) device, which is handled by the Intel VSEC
driver. The Intel VSEC driver parses VSEC structures present in the PCI
configuration space of the given device and creates an auxiliary device
object for each of them. In particular, it creates an auxiliary device
object representing TPMI that can be bound by an auxiliary driver.
Introduce a TPMI driver that will bind to the TPMI auxiliary device
object created by the Intel VSEC driver.
The TPMI specification defines a PFS (PM Feature Structure) table.
This table is present in the TPMI MMIO region. The starting address
of PFS is derived from the tBIR (Bar Indicator Register) and "Address"
field from the VSEC header.
Each TPMI PM feature has one entry in the PFS with a unique TPMI
ID and its access details. The TPMI driver creates device nodes
for the supported PM features.
The names of the devices created by the TPMI driver start with the
"intel_vsec.tpmi-" prefix which is followed by a specific name of the
given PM feature (for example, "intel_vsec.tpmi-rapl.0").
The device nodes are create by using interface "intel_vsec_add_aux()"
provided by the Intel VSEC driver.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230202010738.2186174-5-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Intel Software Defined Silicon (SDSi) is now officially known as Intel
On Demand. Add On Demand to the description in the kconfig, documentation,
and driver source.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221119002343.1281885-2-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Cloud Service Providers that operate fleets of servers have reported
[1] occasions where they can detect that a CPU has gone bad due to
effects like electromigration, or isolated manufacturing defects.
However, that detection method is A/B testing seemingly random
application failures looking for a pattern. In-Field Scan (IFS) is
a driver for a platform capability to load a crafted 'scan image'
to run targeted low level diagnostics outside of the CPU's architectural
error detection capabilities.
Stub version of driver just does initial part of check for the IFS
feature. MSR_IA32_CORE_CAPS must enumerate the presence of the
MSR_INTEGRITY_CAPS MSR.
[1]: https://www.youtube.com/watch?v=QMF3rqhjYuM
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-5-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move the current driver from platform/x86/intel/uncore-frequency.c
to platform/x86/intel/uncore-frequency/uncore-frequency.c.
No functional changes are expected.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220204000306.2517447-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Intel Software Defined Silicon (SDSi) is a post manufacturing mechanism for
activating additional silicon features. Features are enabled through a
license activation process. The SDSi driver provides a per socket, sysfs
attribute interface for applications to perform 3 main provisioning
functions:
1. Provision an Authentication Key Certificate (AKC), a key written to
internal NVRAM that is used to authenticate a capability specific
activation payload.
2. Provision a Capability Activation Payload (CAP), a token authenticated
using the AKC and applied to the CPU configuration to activate a new
feature.
3. Read the SDSi State Certificate, containing the CPU configuration
state.
The operations perform function specific mailbox commands that forward the
requests to SDSi hardware to perform authentication of the payloads and
enable the silicon configuration (to be made available after power
cycling).
The SDSi device itself is enumerated as an auxiliary device from the
intel_vsec driver and as such has a build dependency on CONFIG_INTEL_VSEC.
Link: https://github.com/intel/intel-sdsi
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Mark Gross <markgross@kernel.org>
Link: https://lore.kernel.org/r/20220212013252.1293396-2-david.e.box@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Now that there is only 1 c-file left of the intel_cht_int33fe code,
move it to the intel directory instead of it having its own int33fe
sub-directory.
Note this also renames the module from intel_cht_int33fe_typec to
intel_chtwc_int33fe, to better match the names of other PMIC related
modules like the intel_chtdc_ti_pwrbtn module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220206220220.88491-4-hdegoede@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of changes for the driver core for 5.17-rc1.
Lots of little things here, including:
- kobj_type cleanups
- auxiliary_bus documentation updates
- auxiliary_device conversions for some drivers (relevant subsystems
all have provided acks for these)
- kernfs lock contention reduction for some workloads
- other tiny cleanups and changes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits)
kobject documentation: remove default_attrs information
drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb
debugfs: lockdown: Allow reading debugfs files that are not world readable
driver core: Make bus notifiers in right order in really_probe()
driver core: Move driver_sysfs_remove() after driver_sysfs_add()
firmware: edd: remove empty default_attrs array
firmware: dmi-sysfs: use default_groups in kobj_type
qemu_fw_cfg: use default_groups in kobj_type
firmware: memmap: use default_groups in kobj_type
sh: sq: use default_groups in kobj_type
headers/uninline: Uninline single-use function: kobject_has_children()
devtmpfs: mount with noexec and nosuid
driver core: Simplify async probe test code by using ktime_ms_delta()
nilfs2: use default_groups in kobj_type
kobject: remove kset from struct kset_uevent_ops callbacks
driver core: make kobj_type constant.
driver core: platform: document registration-failure requirement
vdpa/mlx5: Use auxiliary_device driver data helpers
net/mlx5e: Use auxiliary_device driver data helpers
soundwire: intel: Use auxiliary_device driver data helpers
...
|
|
While introduction of this menu brings a nice view in the configuration tools,
it brought more issues than solves, i.e. it prevents to locate files in the
intel/ subfolder without touching non-related Kconfig dependencies elsewhere.
Drop X86_PLATFORM_DRIVERS_INTEL altogether.
Note, on x86 it's enabled by default and it's quite unlikely anybody wants to
disable all of the modules in this submenu.
Fixes: 8bd836feb6ca ("platform/x86: intel_skl_int3472: Move to intel/ subfolder")
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211222194941.76054-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Intel Platform Monitoring Technology (PMT) support is indicated by presence
of an Intel defined PCIe Designated Vendor Specific Extended Capabilities
(DVSEC) structure with a PMT specific ID. The current MFD implementation
creates child devices for each PMT feature, currently telemetry, watcher,
and crashlog. However DVSEC structures may also be used by Intel to
indicate support for other features. The Out Of Band Management Services
Module (OOBMSM) uses DVSEC to enumerate several features, including PMT.
In order to support them it is necessary to modify the intel_pmt driver to
handle the creation of the child devices more generically. To that end,
modify the driver to create child devices for any VSEC/DVSEC features on
supported devices (indicated by PCI ID). Additionally, move the
implementation from MFD to the Auxiliary bus. VSEC/DVSEC features are
really multifunctional PCI devices, not platform devices as MFD was
designed for. Auxiliary bus gives more flexibility by allowing the
definition of custom structures that can be shared between associated
auxiliary devices and the parent device. Also, rename the driver from
intel_pmt to intel_vsec to better reflect the purpose.
This series also removes the current runtime pm support which was not
complete to begin with. None of the current devices require runtime pm.
However the support will be replaced when a device is added that requires
it.
Reviewed-by: Mark Gross <markgross@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20211208015015.891275-4-david.e.box@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver is for accessing the PSE (Programmable Service Engine) - an
Embedded Controller like IP - using ISHTP (Integratd Sensor Hub Transport
Protocol) to get battery, thermal and UCSI (USB Type-C Connector System
Software Interface) related data from the platform.
Signed-off-by: K Naduvalath, Sumesh <sumesh.k.naduvalath@intel.com>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Link: https://lore.kernel.org/r/20210913051056.28736-1-sumesh.k.naduvalath@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel WMI Slim Bootloader FW update driver to intel sub-directory
to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-20-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel vButton driver to intel sub-directory to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-19-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel Oaktrail driver to intel sub-directory to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-18-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel vGPIO (INT0002) driver to intel sub-directory
to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-17-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel HID driver to intel sub-directory to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-16-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel AtomISP v2 drivers to intel sub-directory
to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-15-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel Speed Select interface driver to intel sub-directory to improve
readability and rename it from intel_speed_select_if to speed_select_if.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-14-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel Uncore frequency driver to intel sub-directory to improve
readability and rename it from intel-uncore-frequency.c to
uncore-frequency.c.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-13-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel Turbo Max 3 driver to intel sub-directory to improve readability
and rename it from intel_turbo_max_3.c to turbo_max_3.c.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-12-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel Smart Connect driver to intel sub-directory to improve
readability and rename it from intel-smartconnect.c to smartconnect.c.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel RST driver to intel sub-directory to improve readability
and rename it from intel-rst.c to rst.c.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel telemetry driver to intel sub-directory to improve readability.
While at it, spell APL fully in the Kconfig.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210820110458.73018-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel PMC core driver to intel sub-directory to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20210820110458.73018-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel P-Unit IPC driver to intel sub-directory to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel Merrifield power button driver to intel sub-directory
to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel Cherry Trail Dollar Cove TI power button driver
to intel sub-directory to improve readability.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move Intel Broxton Whiskey Cove TMU driver to intel sub-directory
to improve readability.
While at it, spell BXT fully in the Kconfig and switch to select REGMAP.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210820110458.73018-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Dynamic BIOS SAR driver exposing dynamic SAR information from BIOS
The Dynamic SAR (Specific Absorption Rate) driver uses ACPI DSM
(Device Specific Method) to communicate with BIOS and retrieve
dynamic SAR information and change notifications. The driver uses
sysfs to expose this data to userspace via read and notify.
Sysfs interface is documented in detail under:
Documentation/ABI/testing/sysfs-driver-intc_sar
Signed-off-by: Shravan S <s.shravan@intel.com>
Link: https://lore.kernel.org/r/20210723211452.27995-2-s.shravan@intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Move all Intel Platform Monitoring Technology drivers to
drivers/platform/x86/intel/pmt.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210727164928.3171521-1-david.e.box@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Since we have started collecting Intel x86 specific drivers in their own
folder, move intel_cht_int33fe to its own subfolder there.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210618125516.53510-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Start collecting Intel x86 related drivers in its own subfolder.
Move intel_skl_int3472 first.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210618125516.53510-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|