summaryrefslogtreecommitdiff
path: root/drivers/ptp
AgeCommit message (Collapse)AuthorFilesLines
2021-09-27ptp: ocp: Move devlink registration to be last devlink commandLeon Romanovsky1-4/+2
This change prevents from users to access device before devlink is fully configured. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27ptp: clockmatrix: use rsmu driver to access i2c/spi busMin Li3-1241/+431
rsmu (Renesas Synchronization Management Unit ) driver is located in drivers/mfd and responsible for creating multiple devices including clockmatrix phc, which will then use the exposed regmap and mutex handle to access i2c/spi bus. Signed-off-by: Min Li <min.li.xe@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
net/mptcp/protocol.c 977d293e23b4 ("mptcp: ensure tx skbs always have the MPTCP ext") efe686ffce01 ("mptcp: ensure tx skbs always have the MPTCP ext") same patch merged in both trees, keep net-next. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-22devlink: Make devlink_register to be voidLeon Romanovsky1-6/+1
devlink_register() can't fail and always returns success, but all drivers are obligated to check returned status anyway. This adds a lot of boilerplate code to handle impossible flow. Make devlink_register() void and simplify the drivers that use that API call. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Simon Horman <simon.horman@corigine.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> # dsa Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20ptp: ocp: add COMMON_CLK dependencyArnd Bergmann1-0/+1
Without CONFIG_COMMON_CLK, this fails to link: arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_register_i2c': ptp_ocp.c:(.text+0xcc0): undefined reference to `__clk_hw_register_fixed_rate' arm-linux-gnueabi-ld: ptp_ocp.c:(.text+0xcf4): undefined reference to `devm_clk_hw_register_clkdev' arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_detach': ptp_ocp.c:(.text+0x1c24): undefined reference to `clk_hw_unregister_fixed_rate' Fixes: a7e1abad13f3 ("ptp: Add clock driver for the OpenCompute TimeCard.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17ptp: ocp: Avoid operator precedence warning in ptp_ocp_summary_show()Nathan Chancellor1-2/+2
Clang warns twice: drivers/ptp/ptp_ocp.c:2065:16: error: operator '?:' has lower precedence than '&'; '&' will be evaluated first [-Werror,-Wbitwise-conditional-parentheses] on & map ? " ON" : "OFF", src); ~~~~~~~~ ^ drivers/ptp/ptp_ocp.c:2065:16: note: place parentheses around the '&' expression to silence this warning on & map ? " ON" : "OFF", src); ^ ( ) drivers/ptp/ptp_ocp.c:2065:16: note: place parentheses around the '?:' expression to evaluate it first on & map ? " ON" : "OFF", src); ^ on and map are both booleans so this should be a logical AND, which clears up the operator precedence issue. Fixes: a62a56d04e63 ("ptp: ocp: Enable 4th timestamper / PPS generator") Link: https://github.com/ClangBuiltLinux/linux/issues/1457 Suggested-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20210917045204.1385801-1-nathan@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-15ptp: ocp: Add timestamp window adjustmentJonathan Lemon1-11/+66
The following process is used to read the PHC clock and correlate the reading with the "correct" system time. - get starting timestamp - issue PCI write command - issue PCI read command - get ending timestamp - read latched sec/nsec registers The write command is posted to PCI bus and returns. When the write arrives at the FPGA, the PHC time is latched into the sec/nsec registers, and a flag is set indicating the registers are valid. The read command returns this flag, and the time retrieval proceeds. Below is a non-scaled picture of the timing diagram involved. The PHC time corresponds to some SYS time between [start, end]. Userspace usually uses the midpoint between [start, end] to estimate the PCI delay and match this with the PHC time. [start] | | write |-------+ | | \ | read |----+ +----->| | \ * PHC time latched into register | \ | midpoint | +------->| | | | | | +----| | / | |<--------+ | [end] | | As the diagram indicates, the PHC time is latched before the midpoint, so the system clock time is slightly off the real PHC time. This shows up as a phase error with an oscilliscope. The workaround here is to provide a tunable which reduces (shrinks) the end time in the above diagram. This in turn moves the calculated midpoint so the system time and PHC time are in agreemment. Currently, the adjustment reduces the end time by 3/16th of the entire window. E.g.: [start, end] ==> [start, (end - (3/16 * end)], which produces reasonably good results. Also reduce delays by just writing to the clock control register instead of performing a read/modify/write sequence, as the contents of the control register are known. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Have FPGA fold in ns adjustment for adjtime.Jonathan Lemon1-15/+25
The current implementation of adjtime uses gettime/settime to perform nanosecond adjustments. This introduces addtional phase errors due to delays. Instead, use the FPGA's ability to just apply the nanosecond adjustment to the clock directly. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Enable 4th timestamper / PPS generatorJonathan Lemon1-8/+74
A 4th timestamper is added which timestamps the output of the PHC. The clock nanosecond offset is not always zero, so when compared to other timestampers, this provides precise measurements. Also, the timestamper interrupt from the PHC can be used to generate a PPS signal for /dev/pps. Also allow PTP_CLK_REQ_PEROUT requests for a 1PPS output, but do not actually configure any output pins, this is done via sysfs. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add second GNSS deviceJonathan Lemon1-2/+15
Upcoming boards may have a second GNSS receiver, getting information from a different constellation than the first receiver, which provides some measure of anti-spoofing. Expose the sysfs attribute for this device, if detected. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add NMEA outputJonathan Lemon1-2/+55
The timecard can provide a NMEA-1083 ZDA (time and date) output string on a serial port, which can be used to drive other devices. Add the NMEA resources, and the serial port as a sysfs attribute. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add debugfs entry for timecardJonathan Lemon1-0/+233
Provide a view into the timecard internals for debugging. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Separate the init and info logicJonathan Lemon1-36/+60
On startup, parts of the FPGA need to be initialized - break these out into their own functions, separate from the purely informational blocks. On startup, distrbute the UTC:TAI offset from the NMEA GNSS parser, if it is available. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add sysfs attribute utc_tai_offsetJonathan Lemon1-1/+48
IRIG and DCF output time in UTC, but the timecard operates on TAI internally. Add an attribute node which allows adding an offset to these modes before output. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add IRIG-B output mode controlJonathan Lemon1-0/+41
IRIG-B has several different output formats, the timecard defaults to using B007. Add a control which selects different output modes. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add IRIG-B and DCF blocksJonathan Lemon1-0/+129
IRIG (Inter-range Instrumentation Group) timecode format on one of the SMA output channels is provided by the IRIG master FPGA block. Enable the master when the IRIG output format is selected on either one of the output channels. By default, the output is in B007 format. DCF output format is provided by the DCF master block. Also enable the IRIG and DCF slaves, which parse an incoming signal from the external SMA connectors, and may be used to adjust the PHC. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add SMA selector and controlsJonathan Lemon1-28/+361
The latest firmware for the TimeCard adds selectable signals for the SMA input/outputs. Add support for SMA selectors, and the GPIO controls needed for steering signals. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Add third timestamperJonathan Lemon1-2/+17
The firmware may provide a third signal timestamper, so make it available for use. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Report error if resource registration fails.Jonathan Lemon1-1/+5
If a resource could not be registered, report the name of the resource and the error code. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Skip resources with out of range irqsJonathan Lemon1-29/+18
The TimeCard exposes different resources, which may have their own irqs. Space for the irqs is allocated through a MSI or MSI-X interrupt vector. On some platforms, the interrupt allocation fails. Rather than making this fatal, just skip exposing those resources. The main timecard functionality (that of a PTP clock) will work without the additional resources. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Skip I2C flash read when there is no controller.Jonathan Lemon1-2/+5
If an I2C controller isn't present, don't try and read the I2C flash. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: Parameterize the TOD information display.Jonathan Lemon1-1/+2
Only display the TOD information if there is a corresponding TOD resource. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ptp: ocp: parameterize the i2c driver usedJonathan Lemon1-4/+21
Move the xilinx i2c driver parameters to the resource block instead of hardcoding things in the registration functions. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14ptp: ptp_clockmatrix: Add support for pll_mode=0 and manual ref switch of WF ↵Min Li3-47/+376
and WP Also correct how initialize_dco_operating_mode is called Signed-off-by: Min Li <min.li.xe@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14ptp: ptp_clockmatrix: Add support for FW 5.2 (8A34005)Min Li3-92/+165
So far we don't need to support new 5.2 functions but different register addresses Signed-off-by: Min Li <min.li.xe@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-14ptp: ptp_clockmatrix: Remove idtcm_enable_tod_sync()Min Li1-227/+2
Not need since TCS firmware file will configure it properlly. Signed-off-by: Min Li <min.li.xe@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-26ptp: ocp: Simplify Kconfig.Jonathan Lemon1-8/+2
Remove the 'imply' statements, these apparently are not doing what I expected. Platform modules which are used by the driver still need to be enabled in the overall config for them to be used, but there isn't a hard dependency on them. Use 'depend' for selectable modules which provide functions used directly by the driver. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+2
drivers/ptp/Kconfig: 55c8fca1dae1 ("ptp_pch: Restore dependency on PCI") e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-17ptp: ocp: Have Kconfig select NET_DEVLINKJonathan Lemon1-0/+1
NET doesn't imply NET_DEVLINK. Select this separately, so that random config combinations don't complain. Reported-by: kernel test robot <lkp@intel.com> Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-17ptp: ocp: Fix error path for pci_ocp_device_init()Jonathan Lemon1-3/+4
If ptp_ocp_device_init() fails, pci_disable_device() is skipped. Fix the error handling so this case is covered. Update ptp_ocp_remove() so the normal exit path is identical. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-17ptp: ocp: Fix uninitialized variable warning spotted by clang.Jonathan Lemon1-1/+1
If attempting to flash the firmware with a blob of size 0, the entire write loop is skipped and the uninitialized err is returned. Fix by setting to 0 first. Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-16ptp: ocp: don't allow on S390Randy Dunlap1-0/+1
Fix kconfig warning on arch/s390/: WARNING: unmet direct dependencies detected for SERIAL_8250 Depends on [n]: TTY [=y] && HAS_IOMEM [=y] && !S390 [=y] Selected by [m]: - PTP_1588_CLOCK_OCP [=m] && PTP_1588_CLOCK [=m] && HAS_IOMEM [=y] && PCI [=y] && SPI [=y] && I2C [=m] && MTD [=m] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16ptp_pch: Restore dependency on PCIAndy Shevchenko1-1/+2
During the swap dependency on PCH_GBE to selection PTP_1588_CLOCK_PCH incidentally dropped the implicit dependency on the PCI. Restore it. Fixes: 18d359ceb044 ("pch_gbe, ptp_pch: Fix the dependency direction between these drivers") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-14ethernet: fix PTP_1588_CLOCK dependenciesArnd Bergmann2-1/+16
The 'imply' keyword does not do what most people think it does, it only politely asks Kconfig to turn on another symbol, but does not prevent it from being disabled manually or built as a loadable module when the user is built-in. In the ICE driver, the latter now causes a link failure: aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_eth_ioctl': ice_main.c:(.text+0x13b0): undefined reference to `ice_ptp_get_ts_config' ice_main.c:(.text+0x13b0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_get_ts_config' aarch64-linux-ld: ice_main.c:(.text+0x13bc): undefined reference to `ice_ptp_set_ts_config' ice_main.c:(.text+0x13bc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_set_ts_config' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_prepare_for_reset': ice_main.c:(.text+0x31fc): undefined reference to `ice_ptp_release' ice_main.c:(.text+0x31fc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_release' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_rebuild': This is a recurring problem in many drivers, and we have discussed it several times befores, without reaching a consensus. I'm providing a link to the previous email thread for reference, which discusses some related problems. To solve the dependency issue better than the 'imply' keyword, introduce a separate Kconfig symbol "CONFIG_PTP_1588_CLOCK_OPTIONAL" that any driver can depend on if it is able to use PTP support when available, but works fine without it. Whenever CONFIG_PTP_1588_CLOCK=m, those drivers are then prevented from being built-in, the same way as with a 'depends on PTP_1588_CLOCK || !PTP_1588_CLOCK' dependency that does the same trick, but that can be rather confusing when you first see it. Since this should cover the dependencies correctly, the IS_REACHABLE() hack in the header is no longer needed now, and can be turned back into a normal IS_ENABLED() check. Any driver that gets the dependency wrong will now cause a link time failure rather than being unable to use PTP support when that is in a loadable module. However, the two recently added ptp_get_vclocks_index() and ptp_convert_timestamp() interfaces are only called from builtin code with ethtool and socket timestamps, so keep the current behavior by stubbing those out completely when PTP is in a loadable module. This should be addressed properly in a follow-up. As Richard suggested, we may want to actually turn PTP support into a 'bool' option later on, preventing it from being a loadable module altogether, which would be one way to solve the problem with the ethtool interface. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Link: https://lore.kernel.org/netdev/20210804121318.337276-1-arnd@kernel.org/ Link: https://lore.kernel.org/netdev/CAK8P3a06enZOf=XyZ+zcAwBczv41UuCTz+=0FMf2gBz1_cOnZQ@mail.gmail.com/ Link: https://lore.kernel.org/netdev/CAK8P3a3=eOxE-K25754+fB_-i_0BZzf9a9RfPTX3ppSwu9WZXw@mail.gmail.com/ Link: https://lore.kernel.org/netdev/20210726084540.3282344-1-arnd@kernel.org/ Acked-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210812183509.1362782-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h 9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp") 9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins") 099fdeda659d ("bnxt_en: Event handler for PPS events") kernel/bpf/helpers.c include/linux/bpf-cgroup.h a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()") c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current") drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c 5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray") 2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer") MAINTAINERS 7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo") 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-09devlink: Set device as early as possibleLeon Romanovsky1-22/+4
All kernel devlink implementations call to devlink_alloc() during initialization routine for specific device which is used later as a parent device for devlink_register(). Such late device assignment causes to the situation which requires us to call to device_register() before setting other parameters, but that call opens devlink to the world and makes accessible for the netlink users. Any attempt to move devlink_register() to be the last call generates the following error due to access to the devlink->dev pointer. [ 8.758862] devlink_nl_param_fill+0x2e8/0xe50 [ 8.760305] devlink_param_notify+0x6d/0x180 [ 8.760435] __devlink_params_register+0x2f1/0x670 [ 8.760558] devlink_params_register+0x1e/0x20 The simple change of API to set devlink device in the devlink_alloc() instead of devlink_register() fixes all this above and ensures that prior to call to devlink_register() everything already set. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08ptp: Fix possible memory leak caused by invalid castVinicius Costa Gomes1-1/+1
Fixes possible leak of PTP virtual clocks. The number of PTP virtual clocks to be unregistered is passed as 'u32', but the function that unregister the devices handles that as 'u8'. Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06ptp: ocp: Remove pending_image indicator from devlinkJonathan Lemon1-10/+0
After writing an image blob to the flash memory, a reboot is required to reload the FPGA. There is no versioning prsent in the FPGA image file, so only a running version is available. The 'stored version' was set to 'pending' in order to indicate a reboot was needed. This isn't reliable, as the module could be unloaded/loaded, losing the "reboot needed" indicator. Also, the devlink 'stored version' information is designed to refer to the actual image version. Unfortunately, there is no method to determine the flash image version other than booting it, so remove the devlink stored version setting. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06ptp: ocp: Rename version string shown by devlink.Jonathan Lemon1-2/+2
The TimeCard has two FPGA images in the flash: the actual firmware, and a manufacturing fallback version which is intended to act as a loader in case the flash update failed. Name these "fw" and "loader", which are reflected in devlink: [root@timecard drv]# devlink dev info pci/0000:04:00.0: driver ptp_ocp serial_number fc:c2:3d:2e:d7:c0 versions: running: fw 5 Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06ptp: ocp: Use 'gnss' naming instead of 'gps'Jonathan Lemon1-21/+21
GPS is not the only available positioning system. Use the generic naming of "GNSS" instead. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06ptp: ocp: Remove devlink health and unused parameters.Jonathan Lemon1-80/+0
"devlink health" was used as a way to monitor the GNSS signal status. This isn't really the intended use, and the same functionality can be achived by monitoring the status file. Remove the devlink heath support entirely, and also remove the currently unused devlink parameters. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06ptp: ocp: Add the mapping for the external PPS registers.Jonathan Lemon1-4/+11
There are two PPS blocks: one handles the external PPS signal output, with the other handling the PPS signal input to the internal clock. Add controls for the external PPS block. Rename the fields so they match their function. Add cable_delay to the register definitions. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06ptp: ocp: Fix the error handling path for the class device.Jonathan Lemon1-1/+1
Move the put_device() call to the error handling path, so the device is released after the .release callback, avoiding a use-after-free. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04ptp: ocp: Expose various resources on the timecard.Jonathan Lemon2-46/+1348
The OpenCompute timecard driver has additional functionality besides a clock. Make the following resources available: - The external timestamp channels (ts0/ts1) - devlink support for flashing and health reporting - GPS and MAC serial ports - board serial number (obtained from i2c device) Also add watchdog functionality for when GNSS goes into holdover. The resources are collected under a timecard class directory: [jlemon@timecard ~]$ ls -g /sys/class/timecard/ocp1/ total 0 -r--r--r--. 1 root 4096 Aug 3 19:49 available_clock_sources -rw-r--r--. 1 root 4096 Aug 3 19:49 clock_source lrwxrwxrwx. 1 root 0 Aug 3 19:49 device -> ../../../0000:04:00.0/ -r--r--r--. 1 root 4096 Aug 3 19:49 gps_sync lrwxrwxrwx. 1 root 0 Aug 3 19:49 i2c -> ../../xiic-i2c.1024/i2c-2/ drwxr-xr-x. 2 root 0 Aug 3 19:49 power/ lrwxrwxrwx. 1 root 0 Aug 3 19:49 pps -> ../../../../../virtual/pps/pps1/ lrwxrwxrwx. 1 root 0 Aug 3 19:49 ptp -> ../../ptp/ptp2/ -r--r--r--. 1 root 4096 Aug 3 19:49 serialnum lrwxrwxrwx. 1 root 0 Aug 3 19:49 subsystem -> ../../../../../../class/timecard/ lrwxrwxrwx. 1 root 0 Aug 3 19:49 ttyGPS -> ../../tty/ttyS7/ lrwxrwxrwx. 1 root 0 Aug 3 19:49 ttyMAC -> ../../tty/ttyS8/ -rw-r--r--. 1 root 4096 Aug 3 19:39 uevent The labeling is needed at the minimum, in order to tell the serial devices apart. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-08ptp: Relocate lookup cookie to correct block.Jonathan Lemon1-1/+1
An earlier commit set the pps_lookup cookie, but the line was somehow added to the wrong code block. Correct this. Fixes: 8602e40fc813 ("ptp: Set lookup cookie when creating a PTP PPS source.") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Dario Binacchi <dariobin@libero.it> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-05ptp: fix format string mismatch in ptp_sysfs.cYangbo Lu1-2/+2
Fix format string mismatch in ptp_sysfs.c. Use %u for unsigned int. Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-05ptp: fix NULL pointer dereference in ptp_clock_registerYangbo Lu1-1/+1
Fix NULL pointer dereference in ptp_clock_register. The argument "parent" of ptp_clock_register may be NULL pointer. Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01ptp: add kernel API ptp_convert_timestamp()Yangbo Lu1-0/+34
Add kernel API ptp_convert_timestamp() to convert raw hardware timestamp to a specified ptp vclock time. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01ptp: add kernel API ptp_get_vclocks_index()Yangbo Lu3-1/+39
Add kernel API ptp_get_vclocks_index() to get all ptp vclocks index on pclock. This is preparation for supporting ptp vclocks info query through ethtool. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01ptp: track available ptp vclocks informationYangbo Lu3-4/+40
Track available ptp vclocks information. Record index values of available ptp vclocks during registering and unregistering. This is preparation for supporting ptp vclocks info query through ethtool. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-18 09:17:54 +0300