summaryrefslogtreecommitdiff
path: root/drivers/pwm/pwm-iqs620a.c
AgeCommit message (Collapse)AuthorFilesLines
2023-03-23pwm: iqs620a: Explicitly set .polarity in .get_state()Uwe Kleine-König1-0/+1
The driver only supports normal polarity. Complete the implementation of .get_state() by setting .polarity accordingly. Fixes: 6f0841a8197b ("pwm: Add support for Azoteq IQS620A PWM generator") Reviewed-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20230228135508.1798428-4-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2023-02-17pwm: iqs620a: Replace one remaining instance of regmap_update_bits()Jeff LaBundy1-2/+2
The call to regmap_update_bits() which was responsible for clearing the PWM output enable register bit was recently dropped in favor of a call to regmap_clear_bits(), thereby simplifying the code. Similarly, the call to regmap_update_bits() which sets the same bit can be simplified with a call to regmap_set_bits(). Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-12-06pwm: Make .get_state() callback return an error codeUwe Kleine-König1-2/+4
.get_state() might fail in some cases. To make it possible that a driver signals such a failure change the prototype of .get_state() to return an error code. This patch was created using coccinelle and the following semantic patch: @p1@ identifier getstatefunc; identifier driver; @@ struct pwm_ops driver = { ..., .get_state = getstatefunc ,... }; @p2@ identifier p1.getstatefunc; identifier chip, pwm, state; @@ -void +int getstatefunc(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state) { ... - return; + return 0; ... } plus the actual change of the prototype in include/linux/pwm.h (plus some manual fixing of indentions and empty lines). So for now all drivers return success unconditionally. They are adapted in the following patches to make the changes easier reviewable. Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Acked-by: Douglas Anderson <dianders@chromium.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221130152148.2769768-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2022-12-06pwm: iqs620a: Use regmap_clear_bits and regmap_set_bits where applicableUwe Kleine-König1-2/+2
Found using coccinelle and the following semantic patch: @@ expression map, reg, bits; @@ - regmap_update_bits(map, reg, bits, bits) + regmap_set_bits(map, reg, bits) @@ expression map, reg, bits; @@ - regmap_update_bits(map, reg, bits, 0) + regmap_clear_bits(map, reg, bits) Link: https://lore.kernel.org/r/20221115111347.3705732-4-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-09-02pwm: iqs620a: Simplify using devm_pwmchip_add()Uwe Kleine-König1-15/+1
This allows to drop the platform_driver's remove function. This is the only user of driver data so this can go away, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-03-22pwm: Always allocate PWM chip base ID dynamicallyUwe Kleine-König1-1/+0
Since commit 5e5da1e9fbee ("pwm: ab8500: Explicitly allocate pwm chip base dynamically") all drivers use dynamic ID allocation explicitly. New drivers are supposed to do the same, so remove support for driver specified base IDs and drop all assignments in the low-level drivers. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-02-22pwm: iqs620a: Correct a stale state variableJeff LaBundy1-51/+37
If duty cycle is first set to a value that is sufficiently high to enable the output (e.g. 10000 ns) but then lowered to a value that is quantized to zero (e.g. 1000 ns), the output is disabled as the device cannot drive a constant zero (as expected). However if the device is later re-initialized due to watchdog bite, the output is re-enabled at the next-to-last duty cycle (10000 ns). This is because the iqs620_pwm->out_en flag unconditionally tracks state->enabled instead of what was actually written to the device. To solve this problem, use one state variable that encodes all 257 states of the output (duty_scale) with 0 representing tri-state, 1 representing the minimum available duty cycle and 256 representing 100% duty cycle. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-02-22pwm: iqs620a: Fix overflow and optimize calculationsUwe Kleine-König1-3/+5
If state->duty_cycle is 0x100000000000000, the previous calculation of duty_scale overflows and yields a duty cycle ratio of 0% instead of 100%. Fix this by clamping the requested duty cycle to the maximal possible duty cycle first. This way it is possible to use a native integer division instead of a (depending on the architecture) more expensive 64bit division. With this change in place duty_scale cannot be bigger than 256 which allows to simplify the calculation of duty_val. Fixes: 6f0841a8197b ("pwm: Add support for Azoteq IQS620A PWM generator") Tested-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-12-17pwm: Use -EINVAL for unsupported polarityThierry Reding1-1/+1
Instead of using a mix of -EOPNOTSUPP and -ENOTSUPP, use the more standard -EINVAL to signal that the specified polarity value was invalid. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-06-17pwm: iqs620a: Use lowercase hexadecimal literals for consistencyThierry Reding1-4/+4
Other drivers use lowercase hexadecimal literals, so convert the IQS620a driver to do the same for consistency. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-06-17pwm: iqs620a: Use 64-bit divisionThierry Reding1-3/+4
The PWM framework is going to change the PWM period and duty cycles to be 64-bit unsigned integers. To avoid build errors on platforms that do not natively support 64-bit division, use explicity 64-bit division. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-04-14pwm: Add support for Azoteq IQS620A PWM generatorJeff LaBundy1-0/+270
This patch adds support for the Azoteq IQS620A, capable of generating a 1-kHz PWM output with duty cycle between ~0.4% and 100% (inclusive). Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>