summaryrefslogtreecommitdiff
path: root/drivers/pwm
AgeCommit message (Collapse)AuthorFilesLines
2023-01-14pwm: tegra: Fix 32 bit buildSteven Price1-1/+1
[ Upstream commit dd1f1da4ada5d8ac774c2ebe97230637820b3323 ] The value of NSEC_PER_SEC << PWM_DUTY_WIDTH doesn't fix within a 32 bit integer causing a build warning/error (and the value truncated): drivers/pwm/pwm-tegra.c: In function ‘tegra_pwm_config’: drivers/pwm/pwm-tegra.c:148:53: error: result of ‘1000000000 << 8’ requires 39 bits to represent, but ‘long int’ only has 32 bits [-Werror=shift-overflow=] 148 | required_clk_rate = DIV_ROUND_UP_ULL(NSEC_PER_SEC << PWM_DUTY_WIDTH, | ^~ Explicitly cast to a u64 to ensure the correct result. Fixes: cfcb68817fb3 ("pwm: tegra: Improve required rate calculation") Signed-off-by: Steven Price <steven.price@arm.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14pwm: sifive: Call pwm_sifive_update_clock() while mutex is heldUwe Kleine-König1-1/+4
[ Upstream commit 45558b3abb87eeb2cedb8a59cb2699c120b5102a ] As was documented in commit 0f02f491b786 ("pwm: sifive: Reduce time the controller lock is held") a caller of pwm_sifive_update_clock() must hold the mutex. So fix pwm_sifive_clock_notifier() to grab the lock. While this necessity was only documented later, the race exists since the driver was introduced. Fixes: 9e37a53eb051 ("pwm: sifive: Add a driver for SiFive SoC PWM") Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Link: https://lore.kernel.org/r/20221018061656.1428111-1-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-14pwm: tegra: Improve required rate calculationJon Hunter1-2/+2
[ Upstream commit f271946117dde2ca8741b8138b347b2d68e6ad56 ] For the case where dev_pm_opp_set_rate() is called to set the PWM clock rate, the requested rate is calculated as ... required_clk_rate = (NSEC_PER_SEC / period_ns) << PWM_DUTY_WIDTH; The above calculation may lead to rounding errors because the NSEC_PER_SEC is divided by 'period_ns' before applying the PWM_DUTY_WIDTH multiplication factor. For example, if the period is 45334ns, the above calculation yields a rate of 5646848Hz instead of 5646976Hz. Fix this by applying the multiplication factor before dividing and using the DIV_ROUND_UP macro which yields the expected result of 5646976Hz. Fixes: 1d7796bdb63a ("pwm: tegra: Support dynamic clock frequency configuration") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21pwm: lpc18xx-sct: Convert to devm_platform_ioremap_resource()Yangtao Li1-3/+1
[ Upstream commit 74ec20a4e6a064ac2cdfb577c115cb948b307f0f ] Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21pwm: sifive: Shut down hardware only after pwmchip_remove() completedUwe Kleine-König1-2/+3
[ Upstream commit 2375e964d541bb09158cd2dff67b5d74e8de61cd ] The PWMs are expected to be functional until pwmchip_remove() is called. So disable the clks only afterwards. Fixes: 9e37a53eb051 ("pwm: sifive: Add a driver for SiFive SoC PWM") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21pwm: sifive: Ensure the clk is enabled exactly once per running PWMUwe Kleine-König1-9/+37
[ Upstream commit ace41d7564e655c39f709a78c035188a460c7cbd ] .apply() assumes the clk to be for a given PWM iff the PWM is enabled. So make sure this is the case when .probe() completes. And in .remove() disable the according number of times. This fixes a clk enable/disable imbalance, if some PWMs are already running at probe time. Fixes: 9e37a53eb051 (pwm: sifive: Add a driver for SiFive SoC PWM) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21pwm: sifive: Simplify offset calculation for PWMCMP registersUwe Kleine-König1-7/+3
[ Upstream commit 20550a61880fc55e68a0d290ad195b74729c0e7b ] Instead of explicitly using PWM_SIFIVE_PWMCMP0 + pwm->hwpwm * PWM_SIFIVE_SIZE_PWMCMP for each access to one of the PWMCMP registers, introduce a macro that takes the hwpwm id as parameter. For the register definition using a plain 4 instead of the cpp constant PWM_SIFIVE_SIZE_PWMCMP is easier to read, so define the offset macro without the constant. The latter can then be dropped as there are no users left. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-21pwm: sifive: Don't check the return code of pwmchip_remove()Uwe Kleine-König1-3/+3
[ Upstream commit ceb2c2842f3664dcc4e6d8cb317e1e83bb81b1e5 ] pwmchip_remove() returns always 0. Don't use the value to make it possible to eventually change the function to return void. Also the driver core ignores the return value of pwm_sifive_remove(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14pwm: lp3943: Fix duty calculation in case period was clampedUwe Kleine-König1-0/+1
[ Upstream commit 5e3b07ca5cc78cd4a987e78446849e41288d87cb ] The hardware only supports periods <= 1.6 ms and if a bigger period is requested it is clamped to 1.6 ms. In this case duty_cycle might be bigger than 1.6 ms and then the duty cycle register is written with a value bigger than LP3943_MAX_DUTY. So clamp duty_cycle accordingly. Fixes: af66b3c0934e ("pwm: Add LP3943 PWM driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()Uwe Kleine-König1-11/+9
[ Upstream commit 0401f24cd238ae200a23a13925f98de3d2c883b8 ] When a driver calls pwmchip_add() it has to be prepared to immediately get its callbacks called. So move allocation of driver data and hardware initialization before the call to pwmchip_add(). This fixes a potential NULL pointer exception and a race condition on register writes. Fixes: 841e6f90bb78 ("pwm: NXP LPC18xx PWM/SCT driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26pwm: stm32-lp: Don't modify HW state in .remove() callbackUwe Kleine-König1-2/+0
[ Upstream commit d44084c93427bb0a9261432db1a8ca76a42d805e ] A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26pwm: rockchip: Don't modify HW state in .remove() callbackUwe Kleine-König1-14/+0
[ Upstream commit 9d768cd7fd42bb0be16f36aec48548fca5260759 ] A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26pwm: img: Don't modify HW state in .remove() callbackUwe Kleine-König1-16/+0
[ Upstream commit c68eb29c8e9067c08175dd0414f6984f236f719d ] A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-26pwm: mxs: Don't modify HW state in .probe() after the PWM chip was registeredUwe Kleine-König1-8/+5
commit 020162d6f49f2963062229814a56a89c86cbeaa8 upstream. This fixes a race condition: After pwmchip_add() is called there might already be a consumer and then modifying the hardware behind the consumer's back is bad. So reset before calling pwmchip_add(). Note that reseting the hardware isn't the right thing to do if the PWM is already running as it might e.g. disable (or even enable) a backlight that is supposed to be on (or off). Fixes: 4dce82c1e840 ("pwm: add pwm-mxs support") Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-26pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was ↵Uwe Kleine-König1-5/+5
registered commit 3d2813fb17e5fd0d73c1d1442ca0192bde4af10e upstream. This fixes a race condition: After pwmchip_add() is called there might already be a consumer and then modifying the hardware behind the consumer's back is bad. So set the default before. (Side-note: I don't know what this register setting actually does, if this modifies the polarity there is an inconsistency because the inversed polarity isn't considered if the PWM is already running during .probe().) Fixes: acfd92fdfb93 ("pwm: lpc32xx: Set PWM_PIN_LEVEL bit to default value") Cc: Sylvain Lemieux <slemieux@tycoint.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-28pwm: sprd: Ensure configuring period and duty_cycle isn't wrongly skippedUwe Kleine-König1-7/+4
[ Upstream commit 65e2e6c1c20104ed19060a38f4edbf14e9f9a9a5 ] As the last call to sprd_pwm_apply() might have exited early if state->enabled was false, the values for period and duty_cycle stored in pwm->state might not have been written to hardware and it must be ensured that they are configured before enabling the PWM. Fixes: 8aae4b02e8a6 ("pwm: sprd: Add Spreadtrum PWM support") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20pwm: imx1: Don't disable clocks at device remove timeUwe Kleine-König1-2/+0
[ Upstream commit 1bc6ea31cb41d50302a3c9b401964cf0a88d41f9 ] The .remove() callback disables clocks that were not enabled in .probe(). So just probing and then unbinding the driver results in a clk enable imbalance. So just drop the call to disable the clocks. (Which BTW was also in the wrong order because the call makes the PWM unfunctional and so should have come only after pwmchip_remove()). Fixes: 9f4c8f9607c3 ("pwm: imx: Add ipg clock operation") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20pwm: tegra: Don't modify HW state in .remove callbackUwe Kleine-König1-13/+0
[ Upstream commit 86f7fa71cd830d18d7ebcaf719dffd5ddfe1acdd ] A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. So drop the hardware modification from the .remove() callback. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20pwm: img: Fix PM reference leak in img_pwm_enable()Zou Wei1-1/+1
[ Upstream commit fde25294dfd8e36e4e30b693c27a86232864002a ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20pwm: spear: Don't modify HW state in .remove callbackUwe Kleine-König1-4/+0
[ Upstream commit b601a18f12383001e7a8da238de7ca1559ebc450 ] A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. So drop the hardware modification from the .remove() callback. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19pwm: atmel: Fix duty cycle calculation in .get_state()Uwe Kleine-König1-1/+1
[ Upstream commit 453e8b3d8e36ddcb283b3d1698864a03ea45599a ] The CDTY register contains the number of inactive cycles. .apply() does this correctly, however .get_state() got this wrong. Fixes: 651b510a74d4 ("pwm: atmel: Implement .get_state()") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04pwm: iqs620a: Fix overflow and optimize calculationsUwe Kleine-König1-3/+5
[ Upstream commit 72d6b2459dbd539c1369149e501fdc3dc8ddef16 ] If state->duty_cycle is 0x100000000000000, the previous calculation of duty_scale overflows and yields a duty cycle ratio of 0% instead of 100%. Fix this by clamping the requested duty cycle to the maximal possible duty cycle first. This way it is possible to use a native integer division instead of a (depending on the architecture) more expensive 64bit division. With this change in place duty_scale cannot be bigger than 256 which allows to simplify the calculation of duty_val. Fixes: 6f0841a8197b ("pwm: Add support for Azoteq IQS620A PWM generator") Tested-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04pwm: rockchip: Eliminate potential race condition when probingSimon South1-3/+6
[ Upstream commit d21ba5d6217bd5a6a696678385906ed1994b380b ] Commit 48cf973cae33 ("pwm: rockchip: Avoid glitches on already running PWMs") introduced a potential race condition in rockchip_pwm_probe(): A consumer could enable an inactive PWM, or disable a running one, between rockchip_pwm_probe() registering the device via pwmchip_add() and checking whether it is enabled (to determine whether it was started by a bootloader). This could result in a device's PWM clock being either enabled once more than necessary, potentially causing it to continue running when no longer needed, or disabled once more than necessary, producing a warning from the kernel. Eliminate these possibilities by modifying rockchip_pwm_probe() so it checks whether a device is enabled before registering it rather than after. Fixes: 48cf973cae33 ("pwm: rockchip: Avoid glitches on already running PWMs") Reported-by: Trent Piepho <tpiepho@gmail.com> Signed-off-by: Simon South <simon@simonsouth.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04pwm: rockchip: rockchip_pwm_probe(): Remove superfluous clk_unprepare()Simon South1-1/+0
[ Upstream commit d5d8d675865ccddfe4da26c85f22c55cec663bf2 ] If rockchip_pwm_probe() fails to register a PWM device it calls clk_unprepare() for the device's PWM clock, without having first disabled the clock and before jumping to an error handler that also unprepares it. This is likely to produce warnings from the kernel about the clock being unprepared when it is still enabled, and then being unprepared when it has already been unprepared. Prevent these warnings by removing this unnecessary call to clk_unprepare(). Fixes: 48cf973cae33 ("pwm: rockchip: Avoid glitches on already running PWMs") Signed-off-by: Simon South <simon@simonsouth.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04pwm: rockchip: Enable APB clock during register access while probingSimon South1-3/+5
[ Upstream commit d9b657a5cdbd960de35dee7e06473caf44a9016f ] Commit 457f74abbed0 ("pwm: rockchip: Keep enabled PWMs running while probing") modified rockchip_pwm_probe() to access a PWM device's registers directly to check whether or not the device is enabled, but did not also change the function so it first enables the device's APB clock to be certain the device can respond. This risks hanging the kernel on systems with PWM devices that use more than a single clock. Avoid this by enabling the device's APB clock before accessing its registers (and disabling the clock when register access is complete). Fixes: 457f74abbed0 ("pwm: rockchip: Keep enabled PWMs running while probing") Reported-by: Thierry Reding <thierry.reding@gmail.com> Suggested-by: Trent Piepho <tpiepho@gmail.com> Signed-off-by: Simon South <simon@simonsouth.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30pwm: sun4i: Remove erroneous else branchThierry Reding1-5/+1
[ Upstream commit 6eefb79d6f5bc4086bd02c76f1072dd4a8d9d9f6 ] Commit d3817a647059 ("pwm: sun4i: Remove redundant needs_delay") changed the logic of an else branch so that the PWM_EN and PWM_CLK_GATING bits are now cleared if the PWM is to be disabled, whereas previously the condition was always false, and hence the branch never got executed. This code is reported causing backlight issues on boards based on the Allwinner A20 SoC. Fix this by removing the else branch, which restores the behaviour prior to the offending commit. Note that the PWM_EN and PWM_CLK_GATING bits still get cleared later in sun4i_pwm_apply() if the PWM is to be disabled. Fixes: d3817a647059 ("pwm: sun4i: Remove redundant needs_delay") Reported-by: Taras Galchenko <tpgalchenko@gmail.com> Suggested-by: Taras Galchenko <tpgalchenko@gmail.com> Tested-by: Taras Galchenko <tpgalchenko@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30pwm: imx27: Fix overflow for bigger periodsUwe Kleine-König1-1/+2
[ Upstream commit 1ce65396e6b2386b4fd54f87beff0647a772e1cd ] The second parameter of do_div is an u32 and NSEC_PER_SEC * prescale overflows this for bigger periods. Assuming the usual pwm input clk rate of 66 MHz this happens starting at requested period > 606060 ns. Splitting the division into two operations doesn't loose any precision. It doesn't need to be feared that c / NSEC_PER_SEC doesn't fit into the unsigned long variable "duty_cycles" because in this case the assignment above to period_cycles would already have been overflowing as period >= duty_cycle and then the calculation is moot anyhow. Fixes: aef1a3799b5c ("pwm: imx27: Fix rounding behavior") Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30pwm: lp3943: Dynamically allocate PWM chip baseLokesh Vutla1-0/+1
[ Upstream commit 1f0f1e80fdd3aa9631f6c22cda4f8550cfcfcc3e ] When there are other PWM controllers enabled along with pwm-lp3943, pwm-lp3942 is failing to probe with -EEXIST error. This is because other PWM controllers are probed first and assigned PWM base 0 and pwm-lp3943 is requesting for 0 again. In order to avoid this, assign the chip base with -1, so that it is dynamically allocated. Fixes: af66b3c0934e ("pwm: Add LP3943 PWM driver") Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Uwe Kleine-König <u.kleine-könig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30pwm: zx: Add missing cleanup in error pathUwe Kleine-König1-0/+1
[ Upstream commit 269effd03f6142df4c74814cfdd5f0b041b30bf9 ] zx_pwm_probe() called clk_prepare_enable() before; this must be undone in the error path. Fixes: 4836193c435c ("pwm: Add ZTE ZX PWM device driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-03pwm: sl28cpld: fix getting driver data in pwm callbacksUwe Kleine-König1-2/+4
Currently .get_state() and .apply() use dev_get_drvdata() on the struct device related to the pwm chip. This only works after .probe() called platform_set_drvdata() which in this driver happens only after pwmchip_add() and so comes possibly too late. Instead of setting the driver data earlier use the traditional container_of approach as this way the driver data is conceptually and computational nearer. Fixes: 9db33d221efc ("pwm: Add support for sl28cpld PWM controller") Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-1/+1
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-23Merge tag 'tag-chrome-platform-for-v5.10' of ↵Linus Torvalds1-20/+17
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros-ec: - Error code cleanup across cros-ec by Guenter - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status cros_ec_typec: - Landed initial USB4 support in typec connector class driver for cros_ec - Role switch bugfix on disconnect, and reordering configuration steps cros_ec_lightbar: - Fix buffer outsize and result for get_lightbar_version misc: - Remove config MFD_CROS_EC, now that transition from MFD is complete - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap" * tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA platform/chrome: Use kobj_to_dev() instead of container_of() platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer() platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command platform/chrome: cros_ec_trace: Add fields to command traces platform/chrome: cros_ec_typec: Re-order connector configuration steps platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role() platform/chrome: cros_ec_typec: USB4 support pwm: cros-ec: Simplify EC error handling platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status platform/chrome: cros_ec_sysfs: Report range of error codes from EC cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
2020-10-22Merge tag 'pwm/for-5.10-rc1' of ↵Linus Torvalds10-90/+64
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This release cycle's updates are mostly cleanup and some minor fixes" * tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: dt-bindings: pwm: renesas,pwm-rcar: Add r8a7742 support dt-bindings: pwm: renesas,tpu-pwm: Document r8a7742 support pwm: Allow store 64-bit duty cycle from sysfs interface pwm: img: Fix null pointer access in probe pwm: pca9685: Disable unused alternative addresses pwm: pca9685: Use BIT() macro instead of shift pwm: pca9685: Make comments more consistent pwm: sun4i: Simplify with dev_err_probe() pwm: sprd: Simplify with dev_err_probe() pwm: sifive: Simplify with dev_err_probe() pwm: rockchip: Simplify with dev_err_probe() pwm: jz4740: Simplify with dev_err_probe() pwm: bcm2835: Simplify with dev_err_probe() pwm: Convert to use DEFINE_SEQ_ATTRIBUTE macro pwm: rockchip: Keep enabled PWMs running while probing dt-bindings: pwm: renesas,pwm-rcar: Add r8a774e1 support
2020-10-15Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds4-89/+128
Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to better facilitate higher level review, and there's a major refactoring of i915 GEM locking to use more core kernel concepts (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards get DC support, nouveau got a bump in displayport support with common code extraction from i915. Outside of drm this contains a couple of patches for hexint moduleparams which you've acked, and a virtio common code tree that you should also get via it's regular path. New driver: - Cadence MHDP8546 DisplayPort bridge driver core: - cross-driver scatterlist cleanups - devm_drm conversions - remove drm_dev_init - devm_drm_dev_alloc conversion ttm: - lots of refactoring and cleanups bridges: - chained bridge support in more drivers panel: - misc new panels scheduler: - cleanup priority levels displayport: - refactor i915 code into helpers for nouveau i915: - split into display and GT trees - WW locking refactoring in GEM - execbuf2 extension mechanism - syncobj timeline support - GEN 12 HOBL display powersaving - Rocket Lake display additions - Disable FBC on Tigerlake - Tigerlake Type-C + DP improvements - Hotplug interrupt refactoring amdgpu: - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support for DC - Plane rotation enabled - TMZ state info ioctl - PCIe DPC recovery support - DC interrupt handling refactor - OLED panel fixes amdkfd: - add SMI events for thermal throttling - SMI interface events ioctl update - process eviction counters radeon: - move to dma_ for allocations - expose sclk via sysfs msm: - DSI support for sm8150/sm8250 - per-process GPU pagetable support - Displayport support mediatek: - move HDMI phy driver to PHY - convert mtk-dpi to bridge API - disable mt2701 tmds tegra: - bridge support exynos: - misc cleanups vc4: - dual display cleanups ast: - cleanups gma500: - conversion to GPIOd API hisilicon: - misc reworks ingenic: - clock handling and format improvements mcde: - DSI support mgag200: - desktop g200 support mxsfb: - i.MX7 + i.MX8M - alpha plane support panfrost: - devfreq support - amlogic SoC support ps8640: - EDID from eDP retrieval tidss: - AM65xx YUV workaround virtio: - virtio-gpu exported resources rcar-du: - R8A7742, R8A774E1 and R8A77961 support - YUV planar format fixes - non-visible plane handling - VSP device reference count fix - Kconfig fix to avoid displaying disabled options in .config" * tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits) drm/ingenic: Fix bad revert drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init drm/amdgpu: Remove warning for virtual_display drm/amdgpu: kfd_initialized can be static drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/amdgpu: prevent spurious warning drm/amdgpu/swsmu: fix ARC build errors drm/amd/display: Fix OPTC_DATA_FORMAT programming drm/amd/display: Don't allow pstate if no support in blank drm/panfrost: increase readl_relaxed_poll_timeout values MAINTAINERS: Update entry for st7703 driver after the rename Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached" drm/amd/display: HDMI remote sink need mode validation for Linux drm/amd/display: Change to correct unit on audio rate drm/amd/display: Avoid set zero in the requested clk drm/amdgpu: align frag_end to covered address space drm/amdgpu: fix NULL pointer dereference for Renoir drm/vmwgfx: fix regression in thp code due to ttm init refactor. drm/amdgpu/swsmu: add interrupt work handler for smu11 parts drm/amdgpu/swsmu: add interrupt work function ...
2020-09-24pwm: Allow store 64-bit duty cycle from sysfs interfaceJarkko Nikula1-2/+2
PWM core was converted to u64 by the commit a9d887dc1c60 ("pwm: Convert period and duty cycle to u64") but did not change the duty_cycle_store() so it will error out if trying to pass a numeric string bigger than 2^32-1. Fix this by using u64 and kstrtou64() in duty_cycle_store(). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Guru Das Srinagesh <gurus@codeaurora.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: img: Fix null pointer access in probeHauke Mehrtens1-1/+2
dev_get_drvdata() is called in img_pwm_runtime_resume() before the driver data is set. When pm_runtime_enabled() returns false in img_pwm_probe() it calls img_pwm_runtime_resume() which results in a null pointer access. This patch fixes the problem by setting the driver data earlier in the img_pwm_probe() function. This crash was seen when booting the Imagination Technologies Creator Ci40 (Marduk) with kernel 5.4 in OpenWrt. Fixes: e690ae526216 ("pwm: img: Add runtime PM") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: pca9685: Disable unused alternative addressesDavid Jander1-7/+16
The PCA9685 supports listening to 1 or more alternative I2C chip addresses for some special features that this driver does not support. By default the LED ALLCALL address is active (default 0x70), which causes this chip to respond to address 0x70 in addition to its main address (0x41). This is not desireable if there is another device on the same bus that uses this address (like a TMP103 for example). Since this feature is not supported by this driver, it is best to disable these addresses in the chip to avoid unsuspected bus collisions. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: pca9685: Use BIT() macro instead of shiftDavid Jander1-4/+4
Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: pca9685: Make comments more consistentDavid Jander1-7/+7
Make all explanatory comments start with an uppercase char. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: sun4i: Simplify with dev_err_probe()Krzysztof Kozlowski1-24/+12
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: sprd: Simplify with dev_err_probe()Krzysztof Kozlowski1-5/+2
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: sifive: Simplify with dev_err_probe()Krzysztof Kozlowski1-5/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: rockchip: Simplify with dev_err_probe()Krzysztof Kozlowski1-7/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: jz4740: Simplify with dev_err_probe()Krzysztof Kozlowski1-6/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: bcm2835: Simplify with dev_err_probe()Krzysztof Kozlowski1-7/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: Convert to use DEFINE_SEQ_ATTRIBUTE macroLiu Shixin1-14/+3
Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-24pwm: rockchip: Keep enabled PWMs running while probingSimon South1-1/+4
Following commit cfc4c189bc70 ("pwm: Read initial hardware state at request time") the Rockchip PWM driver can no longer assume a device's pwm_state structure has been populated after a call to pwmchip_add(). Consequently, the test in rockchip_pwm_probe() intended to prevent the driver from stopping PWM devices already enabled by the bootloader no longer functions reliably and this can lead to the kernel hanging during startup, particularly on devices like the Pinebook Pro that use a PWM-controlled backlight for their display. Avoid this by querying the device directly at probe time to determine whether or not it is enabled. Fixes: cfc4c189bc70 ("pwm: Read initial hardware state at request time") Signed-off-by: Simon South <simon@simonsouth.net> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-09-17pwm: Add support for sl28cpld PWM controllerMichael Walle3-0/+281
Add support for the PWM controller of the sl28cpld board management controller. This is part of a multi-function device driver. The controller has one PWM channel and can just generate four distinct frequencies. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Thierry Reding <thierry.reding@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2020-09-12Merge drm/drm-next into drm-intel-next-queuedRodrigo Vivi18-193/+39
Sync drm-intel-gt-next here so we can have an unified fixes flow. Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-09-06pwm: crc: Implement get_state() methodHans de Goede1-0/+31
Implement the pwm_ops.get_state() method to complete the support for the new atomic PWM API. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200903112337.4113-14-hdegoede@redhat.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-03 16:46:44 +0300