summaryrefslogtreecommitdiff
path: root/drivers/ras
AgeCommit message (Collapse)AuthorFilesLines
2020-04-14x86/mce: Fix all mce notifiers to update the mce->kflags bitmaskTony Luck1-3/+6
If the handler took any action to log or deal with the error, set a bit in mce->kflags so that the default handler on the end of the machine check chain can see what has been done. Get rid of NOTIFY_STOP returns. Make the EDAC and dev-mcelog handlers skip over errors already processed by CEC. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20200214222720.13168-5-tony.luck@intel.com
2020-04-14x86/mce: Convert the CEC to use the MCE notifierTony Luck1-2/+28
The CEC code has its claws in a couple of routines in mce/core.c. Convert it to just register itself on the normal MCE notifier chain. [ bp: Make cec_add_elem() and cec_init() static. ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20200214222720.13168-3-tony.luck@intel.com
2019-08-08RAS: Build debugfs.o only when enabled in KconfigValdis Kletnieks1-1/+2
In addition, the 0day bot reported this build error: >> drivers/ras/debugfs.c:10:5: error: redefinition of 'ras_userspace_consumers' int ras_userspace_consumers(void) ^~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/ras/debugfs.c:3:0: include/linux/ras.h:14:19: note: previous definition of 'ras_userspace_consumers' was here static inline int ras_userspace_consumers(void) { return 0; } ^~~~~~~~~~~~~~~~~~~~~~~ for a riscv-specific .config where CONFIG_DEBUG_FS is not set. Fix all that by making debugfs.o depend on that define. [ bp: Rewrite commit message. ] Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac@vger.kernel.org Cc: x86@kernel.org Link: http://lkml.kernel.org/r/7053.1565218556@turing-police
2019-08-08RAS: Fix prototype warningsValdis Klētnieks2-0/+3
When building with C=2 and/or W=1, legitimate warnings are issued about missing prototypes: CHECK drivers/ras/debugfs.c drivers/ras/debugfs.c:4:15: warning: symbol 'ras_debugfs_dir' was not declared. Should it be static? drivers/ras/debugfs.c:8:5: warning: symbol 'ras_userspace_consumers' was not declared. Should it be static? drivers/ras/debugfs.c:38:12: warning: symbol 'ras_add_daemon_trace' was not declared. Should it be static? drivers/ras/debugfs.c:54:13: warning: symbol 'ras_debugfs_init' was not declared. Should it be static? CC drivers/ras/debugfs.o drivers/ras/debugfs.c:8:5: warning: no previous prototype for 'ras_userspace_consumers' [-Wmissing-prototypes] 8 | int ras_userspace_consumers(void) | ^~~~~~~~~~~~~~~~~~~~~~~ drivers/ras/debugfs.c:38:12: warning: no previous prototype for 'ras_add_daemon_trace' [-Wmissing-prototypes] 38 | int __init ras_add_daemon_trace(void) | ^~~~~~~~~~~~~~~~~~~~ drivers/ras/debugfs.c:54:13: warning: no previous prototype for 'ras_debugfs_init' [-Wmissing-prototypes] 54 | void __init ras_debugfs_init(void) | ^~~~~~~~~~~~~~~~ Provide the proper includes. [ bp: Take care of the same warnings for cec.c too. ] Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac@vger.kernel.org Cc: x86@kernel.org Link: http://lkml.kernel.org/r/7168.1565218769@turing-police
2019-06-08RAS/CEC: Add copyrightBorislav Petkov1-0/+3
Signed-off-by: Borislav Petkov <bp@suse.de>
2019-06-08RAS/CEC: Add CONFIG_RAS_CEC_DEBUG and move CEC debug features thereTony Luck1-12/+14
The pfn and array files in (debugfs)/ras/cec are intended for debugging the CEC code itself. They are not needed on production systems, so the default setting for this CONFIG option is "n". [ bp: Have it with less ifdeffery by using IS_ENABLED(). ] Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de>
2019-06-08RAS/CEC: Dump the different array element sectionsBorislav Petkov1-1/+4
When dumping the array elements, print them in the following format: [ PFN | generation in binary | count ] to be perfectly clear what all those sections are. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org>
2019-06-08RAS/CEC: Rename count_threshold to action_thresholdBorislav Petkov1-12/+12
... which is the better, more-fitting name anyway. Tony: - make action_threshold u64 due to debugfs accessors expecting u64. - rename the remaining: s/count_threshold/action_threshold/g Co-developed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-edac <linux-edac@vger.kernel.org>
2019-06-08RAS/CEC: Sanity-check array on every insertionBorislav Petkov1-6/+31
Check the elements order in the array after every insertion. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org>
2019-06-08RAS/CEC: Fix potential memory leakBorislav Petkov1-1/+3
Free the array page if a failure is encountered while creating the debugfs nodes. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org>
2019-06-08RAS/CEC: Do not set decay value on errorBorislav Petkov1-2/+2
When the value requested doesn't match the allowed (min,max) range, the @data buffer should not be modified with the invalid value because reading "decay_interval" shows it otherwise as if the previous write succeeded. Move the data write after the check. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org>
2019-06-08RAS/CEC: Check count_threshold unconditionallyBorislav Petkov1-17/+10
The count_threshold should be checked unconditionally, after insertion too, so that a count_threshold value of 1 can cause an immediate offlining. I.e., offline the page on the *first* error encountered. Add comments to make it clear what cec_add_elem() does, while at it. Reported-by: WANG Chao <chao.wang@ucloud.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/20190418034115.75954-3-chao.wang@ucloud.cn
2019-06-08RAS/CEC: Fix pfn insertionBorislav Petkov1-1/+3
When inserting random PFNs for debugging the CEC through (debugfs)/ras/cec/pfn, depending on the return value of pfn_set(), multiple values get inserted per a single write. That is because simple_attr_write() interprets a retval of 0 as success and claims the whole input. However, pfn_set() returns the cec_add_elem() value, which, if > 0 and smaller than the whole input length, makes glibc continue issuing the write syscall until there's input left: pfn_set simple_attr_write debugfs_attr_write full_proxy_write vfs_write ksys_write do_syscall_64 entry_SYSCALL_64_after_hwframe leading to those repeated calls. Return 0 to fix that. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org>
2019-06-08RAS/CEC: Convert the timer callback to a workqueueCong Wang1-24/+22
cec_timer_fn() is a timer callback which reads ce_arr.array[] and updates its decay values. However, it runs in interrupt context and the mutex protection the CEC uses for that array, is inadequate. Convert the used timer to a workqueue to keep the tasks the CEC performs preemptible and thus low-prio. [ bp: Rewrite commit message. s/timer/decay/gi to make it agnostic as to what facility is used. ] Fixes: 011d82611172 ("RAS: Add a Corrected Errors Collector") Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20190416213351.28999-2-xiyou.wangcong@gmail.com
2019-06-08RAS/CEC: Fix binary search functionBorislav Petkov1-14/+20
Switch to using Donald Knuth's binary search algorithm (The Art of Computer Programming, vol. 3, section 6.2.1). This should've been done from the very beginning but the author must've been smoking something very potent at the time. The problem with the current one was that it would return the wrong element index in certain situations: https://lkml.kernel.org/r/CAM_iQpVd02zkVJ846cj-Fg1yUNuz6tY5q1Vpj4LrXmE06dPYYg@mail.gmail.com and the noodling code after the loop was fishy at best. So switch to using Knuth's binary search. The final result is much cleaner and straightforward. Fixes: 011d82611172 ("RAS: Add a Corrected Errors Collector") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: <stable@vger.kernel.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-20RAS/CEC: Increment cec_entered under the mutex lockWANG Chao1-2/+2
Modify ->cec_entered in the critical section of the mutex. Signed-off-by: WANG Chao <chao.wang@ucloud.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: https://lkml.kernel.org/r/20190418034115.75954-2-chao.wang@ucloud.cn
2019-01-25RAS: Use consistent types for UUIDsAndy Shevchenko1-1/+1
The commit 297b64c74385 ("ras: acpi / apei: generate trace event for unrecognized CPER section") brought inconsistency in UUID types which are used across the RAS subsystem. Fix this by using guid_t everywhere. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Thomas Tai <thomas.tai@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Tyler Baicar <tbaicar@codeaurora.org> Link: https://lkml.kernel.org/r/20190125143035.81589-1-andriy.shevchenko@linux.intel.com
2018-12-21treewide: surround Kconfig file paths with double quotesMasahiro Yamada1-1/+1
The Kconfig lexer supports special characters such as '.' and '/' in the parameter context. In my understanding, the reason is just to support bare file paths in the source statement. I do not see a good reason to complicate Kconfig for the room of ambiguity. The majority of code already surrounds file paths with double quotes, and it makes sense since file paths are constant string literals. Make it treewide consistent now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-01-23mm/memory_failure: Remove unused trapno from memory_failureEric W. Biederman1-1/+1
Today 4 architectures set ARCH_SUPPORTS_MEMORY_FAILURE (arm64, parisc, powerpc, and x86), while 4 other architectures set __ARCH_SI_TRAPNO (alpha, metag, sparc, and tile). These two sets of architectures do not interesect so remove the trapno paramater to remove confusion. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-11-14Merge branch 'timers-core-for-linus' of ↵Linus Torvalds1-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Yet another big pile of changes: - More year 2038 work from Arnd slowly reaching the point where we need to think about the syscalls themself. - A new timer function which allows to conditionally (re)arm a timer only when it's either not running or the new expiry time is sooner than the armed expiry time. This allows to use a single timer for multiple timeout requirements w/o caring about the first expiry time at the call site. - A new NMI safe accessor to clock real time for the printk timestamp work. Can be used by tracing, perf as well if required. - A large number of timer setup conversions from Kees which got collected here because either maintainers requested so or they simply got ignored. As Kees pointed out already there are a few trivial merge conflicts and some redundant commits which was unavoidable due to the size of this conversion effort. - Avoid a redundant iteration in the timer wheel softirq processing. - Provide a mechanism to treat RTC implementations depending on their hardware properties, i.e. don't inflict the write at the 0.5 seconds boundary which originates from the PC CMOS RTC to all RTCs. No functional change as drivers need to be updated separately. - The usual small updates to core code clocksource drivers. Nothing really exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits) timers: Add a function to start/reduce a timer pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday() timer: Prepare to change all DEFINE_TIMER() callbacks netfilter: ipvs: Convert timers to use timer_setup() scsi: qla2xxx: Convert timers to use timer_setup() block/aoe: discover_timer: Convert timers to use timer_setup() ide: Convert timers to use timer_setup() drbd: Convert timers to use timer_setup() mailbox: Convert timers to use timer_setup() crypto: Convert timers to use timer_setup() drivers/pcmcia: omap1: Fix error in automated timer conversion ARM: footbridge: Fix typo in timer conversion drivers/sgi-xp: Convert timers to use timer_setup() drivers/pcmcia: Convert timers to use timer_setup() drivers/memstick: Convert timers to use timer_setup() drivers/macintosh: Convert timers to use timer_setup() hwrng/xgene-rng: Convert timers to use timer_setup() auxdisplay: Convert timers to use timer_setup() sparc/led: Convert timers to use timer_setup() mips: ip22/32: Convert timers to use timer_setup() ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman3-0/+3
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01RAS/CEC: Convert timers to use timer_setup()Kees Cook1-5/+3
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Borislav Petkov <bp@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Borislav Petkov <bp@suse.de>
2017-10-05RAS/CEC: Use the right length for "cec_disable"Nicolas Iooss1-1/+1
parse_cec_param() compares a string with "cec_disable" using only 7 characters of the 11-character-long string. The proper solution for this would be: #define CEC_DISABLE "cec_disable" strncmp(str, CEC_DISABLE, strlen(CEC_DISABLE)) but when comparing a string against a string constant strncmp() has no advantage over strcmp() because the comparison is guaranteed to be bound by the string constant. So just replace str strncmp() with strcmp(). [ tglx: Made it use strcmp and updated the changelog ] Fixes: 011d82611172 ("RAS: Add a Corrected Errors Collector") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170903075440.30250-1-nicolas.iooss_linux@m4x.org
2017-07-06Merge tag 'arm64-upstream' of ↵Linus Torvalds1-1/+15
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: - RAS reporting via GHES/APEI (ACPI) - Indirect ftrace trampolines for modules - Improvements to kernel fault reporting - Page poisoning - Sigframe cleanups and preparation for SVE context - Core dump fixes - Sparse fixes (mainly relating to endianness) - xgene SoC PMU v3 driver - Misc cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits) arm64: fix endianness annotation for 'struct jit_ctx' and friends arm64: cpuinfo: constify attribute_group structures. arm64: ptrace: Fix incorrect get_user() use in compat_vfp_set() arm64: ptrace: Remove redundant overrun check from compat_vfp_set() arm64: ptrace: Avoid setting compat FP[SC]R to garbage if get_user fails arm64: fix endianness annotation for __apply_alternatives()/get_alt_insn() arm64: fix endianness annotation in get_kaslr_seed() arm64: add missing conversion to __wsum in ip_fast_csum() arm64: fix endianness annotation in acpi_parking_protocol.c arm64: use readq() instead of readl() to read 64bit entry_point arm64: fix endianness annotation for reloc_insn_movw() & reloc_insn_imm() arm64: fix endianness annotation for aarch64_insn_write() arm64: fix endianness annotation in aarch64_insn_read() arm64: fix endianness annotation in call_undef_hook() arm64: fix endianness annotation for debug-monitors.c ras: mark stub functions as 'inline' arm64: pass endianness info to sparse arm64: ftrace: fix !CONFIG_ARM64_MODULE_PLTS kernels arm64: signal: Allow expansion of the signal frame acpi: apei: check for pending errors when probing GHES entries ...
2017-06-26RAS/CEC: Check the correct variable in the debugfs error handlingChristophe JAILLET1-1/+1
Check the correct variable when handling a potential error from debugfs_create_file(). Most likely a copy-paste botch. [ Rewrite commit message. ] Fixes: 011d82611172 ("RAS: Add a Corrected Errors Collector") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170623062440.6726-1-christophe.jaillet@wanadoo.fr
2017-06-22trace, ras: add ARM processor error trace eventTyler Baicar1-0/+6
Currently there are trace events for the various RAS errors with the exception of ARM processor type errors. Add a new trace event for such errors so that the user will know when they occur. These trace events are consistent with the ARM processor error section type defined in UEFI 2.6 spec section N.2.4.4. Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-06-22ras: acpi / apei: generate trace event for unrecognized CPER sectionTyler Baicar1-1/+9
The UEFI spec includes non-standard section type support in the Common Platform Error Record. This is defined in section N.2.3 of UEFI version 2.5. Currently if the CPER section's type (UUID) does not match any section type that the kernel knows how to parse, a trace event is not generated. Generate a trace event which contains the raw error data for non-standard section type error records. Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org> CC: Jonathan (Zhixiong) Zhang <zjzhang@codeaurora.org> Tested-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-05-21RAS: Make local function parse_ras_param() staticWei Yongjun1-1/+1
Make parse_ras_param() static as it is used locally only. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20170516161034.2973-1-weiyj.lk@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-28RAS: Add a Corrected Errors CollectorBorislav Petkov5-2/+554
Introduce a simple data structure for collecting correctable errors along with accessors. More detailed description in the code itself. The error decoding is done with the decoding chain now and mce_first_notifier() gets to see the error first and the CEC decides whether to log it and then the rest of the chain doesn't hear about it - basically the main reason for the CE collector - or to continue running the notifiers. When the CEC hits the action threshold, it will try to soft-offine the page containing the ECC and then the whole decoding chain gets to see the error. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/20170327093304.10683-5-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13x86/ras: Move AMD MCE injector to arch/x86/ras/Borislav Petkov1-0/+3
This is an x86-specific module and would benefit from being closer to the arch code. Move it there. Update copyright while at it. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1439396985-12812-14-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-13RAS: Add a menuconfig option with descriptive textBorislav Petkov1-2/+32
Text taken a previous patch from "Gong Chen" <gong.chen@linux.intel.com>. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1439396985-12812-11-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-26trace, RAS: Add eMCA trace event interfaceChen, Gong1-0/+3
Add trace interface to elaborate all H/W error related information. Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-06-25RAS, debugfs: Add debugfs interface for RAS subsystemChen, Gong3-1/+71
Implement a new debugfs interface for RAS susbsystem. A file named daemon_active is added there accordingly. This file is used to track if user space daemon accesses perf/trace interface or not. One can track which daemon opens it via "lsof /path/to/debugfs/ras/daemon_active". Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Link: http://lkml.kernel.org/r/1402475691-30045-5-git-send-email-gong.chen@linux.intel.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-06-23trace, RAS: Add basic RAS trace eventChen, Gong3-0/+15
To avoid confuision and conflict of usage for RAS related trace event, add an unified RAS trace event stub. Start a RAS subsystem menu which will be fleshed out in time, when more features get added to it. Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Link: http://lkml.kernel.org/r/1402475691-30045-2-git-send-email-gong.chen@linux.intel.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Tony Luck <tony.luck@intel.com>