summaryrefslogtreecommitdiff
path: root/drivers/remoteproc
AgeCommit message (Collapse)AuthorFilesLines
2023-02-27Merge tag 'soc-drivers-6.3' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, there are lots of minor driver changes across SoC platforms from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung. These usually add support for additional chip variations in existing drivers, but also add features or bugfixes. The SCMI firmware subsystem gains a unified raw userspace interface through debugfs, which can be used for validation purposes. Newly added drivers include: - New power management drivers for StarFive JH7110, Allwinner D1 and Renesas RZ/V2M - A driver for Qualcomm battery and power supply status - A SoC device driver for identifying Nuvoton WPCM450 chips - A regulator coupler driver for Mediatek MT81xxv" * tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) power: supply: Introduce Qualcomm PMIC GLINK power supply soc: apple: rtkit: Do not copy the reg state structure to the stack soc: sunxi: SUN20I_PPU should depend on PM memory: renesas-rpc-if: Remove redundant division of dummy soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support ...
2023-02-26Merge tag 'rproc-v6.3' of ↵Linus Torvalds13-154/+887
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: - Support for PRU clients to acquire a control reference to the PRU instances is introduced, and the PRU now allows specifying firmware-name in Devicetree. sysfs is requested to be read-only when the remoteproc instance is consumed by another kernel driver - Support for the C7xv DSP on AM62A SoC is introduced - The Devicetree binding for the Qualcomm PAS devices are split up in multiple files, to better account for the differences in resources between them. A number of missing Devicetree bindings are added, and the Qualcomm WCNSS binding is converted to YAML - A few cleanups are introduced for the Mediatek SCP driver. And a sanity check of the firmware image is introduced in the Mediatek driver - For Qualcomm SC7280 ADSP support is added, MSM8953 gains ADSP and modem support, SM6115 and SM8550 gains ADSP, CDSP and modem support, and support for pronto v3 support (used on e.g. MSM8953) is added - The Qualcomm modem remoteproc driver is modified to use a no-map reserved-memory region for it's authentication metadata, in order to avoid fatal security violations caused by accesses from Linux during the authentication process - Support for separate loading of a Devicetree blob is added to the PAS driver, and support for the PAS driver to carve out DSM memory for the modem is added as well - The Qualcomm ADSP remoteproc driver gains support for mapping memory into specific range using the IOMMU. The sysmon driver is transitioned to strlcpy() * tag 'rproc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (69 commits) dt-bindings: mailbox: qcom,apcs-kpss-global: drop mbox-names from example dt-bindings: remoteproc: qcom,glink-edge: correct label description dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema dt-bindings: remoteproc: qcom,sm8550-pas: correct power domains remoteproc: qcom_q6v5_pas: enable sm8550 adsp & cdsp autoboot dt-bindings: remoteproc: qcom: Add sm6115 pas yaml file remoteproc: qcom: pas: Add sm6115 remoteprocs remoteproc: qcom: pas: Adjust the phys addr wrt the mem region remoteproc: qcom: fix sparse warnings remoteproc: qcom: replace kstrdup with kstrndup remoteproc: mediatek: Check the SCP image format remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headers Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use" dt-bindings: remoteproc: qcom,sc7280-mss-pil: Update memory-region dt-bindings: remoteproc: qcom,sc7180-mss-pil: Update memory-region dt-bindings: remoteproc: qcom,msm8996-mss-pil: Update memory region dt-bindings: remoteproc: qcom,q6v5: Move MSM8996 to schema remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data remoteproc: qcom_q6v5_pas: add support for assigning memory to firmware remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loading ...
2023-02-26Merge tag 'rpmsg-v6.3' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull rpmsg updates from Bjorn Andersson: - rpmsg ctrl and char driver locking is ensure ordering in cases where the communication link is being torn down in parallel with calls to open(2) or poll(2) - The glink driver is refactored, to move rpm/smem-specifics out of the common logic and better suite further improvements, such as transports without a mailbox controller. The handling of remoteproc shutdown is improved, to fail clients immediately instead of having them to wait for timeouts. A driver_override memory leak is corrected and a few spelling improvements are introduced - glink_ssr is transitioned off strlcpy() and "gpr" is added as a valid child node of the glink-edge DT binding * tag 'rpmsg-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: glink: Release driver_override rpmsg: glink: Avoid infinite loop on intent for missing channel rpmsg: glink: Fix GLINK command prefix rpmsg: glink: Fix spelling of peek rpmsg: glink: Cancel pending intent requests at removal rpmsg: glink: Fail qcom_glink_tx() once remove has been initiated rpmsg: glink: Move irq and mbox handling to transports rpmsg: glink: rpm: Wrap driver context rpmsg: glink: smem: Wrap driver context rpmsg: glink: Extract tx kick operation rpmsg: glink: Include types in qcom_glink_native.h rpmsg: ctrl: Add lock to rpmsg_ctrldev_remove rpmsg: char: Add lock to avoid race when rpmsg device is released rpmsg: move from strlcpy with unused retval to strscpy dt-bindings: remoteproc: qcom,glink-edge: add GPR node
2023-02-14remoteproc: qcom_q6v5_pas: enable sm8550 adsp & cdsp autobootNeil Armstrong1-2/+2
Set the SM8550 adsp & cdsp auto_boot to true to match the behavior of the previous platforms. Fixes: 7eddedc97563 ("remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & data") Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230206-topic-sm8550-upstream-fix-remoteproc-autoboot-v1-1-11445a0c27c6@linaro.org
2023-02-14remoteproc: qcom: pas: Add sm6115 remoteprocsBhupesh Sharma1-0/+3
Among the subsystems in the Qualcomm sm6115 platform we find audio, compute and modem DSPs. Add support for controlling these using the peripheral authentication service (PAS) remoteproc driver. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230128053504.2099620-1-bhupesh.sharma@linaro.org
2023-02-14remoteproc: qcom: pas: Adjust the phys addr wrt the mem regionYogesh Lal3-6/+32
The minidump table in the toc contains physical addresses that may lie before the physical address of the first elf segment in relocatable images. This change adds a custom dump function for minidumps which calculates the offset into the carveout region using the start of the physical address instead of the start of the first elf segment. Signed-off-by: Yogesh Lal <quic_ylal@quicinc.com> Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1667409129-6254-1-git-send-email-quic_ylal@quicinc.com
2023-02-14remoteproc: qcom: fix sparse warningsMukesh Ojha1-2/+2
This patch try to address below sparse warnings. drivers/remoteproc/qcom_common.c:126:27: warning: restricted __le32 degrades to integer drivers/remoteproc/qcom_common.c:133:32: warning: cast to restricted __le32 drivers/remoteproc/qcom_common.c:133:32: warning: cast from restricted __le64 Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1675180866-16695-1-git-send-email-quic_mojha@quicinc.com
2023-02-14remoteproc: qcom: replace kstrdup with kstrndupMukesh Ojha1-1/+1
Since, there is no guarantee that region.name will be 0-terminated from the firmware side, replace kstrdup with kstrndup. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1676383691-29738-1-git-send-email-quic_mojha@quicinc.com
2023-02-14rpmsg: glink: smem: Wrap driver contextBjorn Andersson1-1/+2
The Glink SMEM driver allocates a struct device and hangs two devres-allocated pipe objects thereon. To facilitate the move of interrupt and mailbox handling to the driver, introduce a wrapper object capturing the device, glink reference and remote processor id. The type of the remoteproc reference is updated, as these are specifically targeting the SMEM implementation. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Chris Lew <quic_clew@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230213155215.1237059-3-quic_bjorande@quicinc.com
2023-02-12remoteproc: mediatek: Check the SCP image formatTinghan Shen1-0/+1
Do a sanity check on the SCP image before loading it to avoid driver crashes. Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230210031354.1335-1-tinghan.shen@mediatek.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-02-09firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/Elliot Berman3-3/+3
Move include/linux/qcom_scm.h to include/linux/firmware/qcom/qcom_scm.h. This removes 1 of a few remaining Qualcomm-specific headers into a more approciate subdirectory under include/. Suggested-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com> Reviewed-by: Guru Das Srinagesh <quic_gurus@quicinc.com> Acked-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230203210956.3580811-1-quic_eberman@quicinc.com
2023-01-25iommu: Add a gfp parameter to iommu_map()Jason Gunthorpe1-2/+3
The internal mechanisms support this, but instead of exposting the gfp to the caller it wrappers it into iommu_map() and iommu_map_atomic() Fix this instead of adding more variants for GFP_KERNEL_ACCOUNT. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/1-v3-76b587fe28df+6e3-iommu_map_gfp_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-01-19remoteproc: qcom_q6v5_mss: Use a carveout to authenticate modem headersSibi Sankar1-6/+53
Any access to the dynamically allocated metadata region by the application processor after assigning it to the remote Q6 will result in a XPU violation. Fix this by replacing the dynamically allocated memory region with a no-map carveout and unmap the modem metadata memory region before passing control to the remote Q6. Reported-and-tested-by: Amit Pundir <amit.pundir@linaro.org> Fixes: 6c5a9dc2481b ("remoteproc: qcom: Make secure world call for mem ownership switch") Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117085840.32356-7-quic_sibis@quicinc.com
2023-01-19Revert "remoteproc: qcom_q6v5_mss: map/unmap metadata region before/after use"Christoph Hellwig1-32/+6
This reverts commit fc156629b23a21181e473e60341e3a78af25a1d4. This commit manages to do three API violations at once: - dereference the return value of dma_alloc_attrs with the DMA_ATTR_NO_KERNEL_MAPPING mapping, which is clearly forbidden and will do the wrong thing on various dma mapping implementations. The fact that dma-direct uses a struct page as a cookie is an undocumented implementation detail - include dma-map-ops.h and use pgprot_dmacoherent despite a clear comment documenting that this is not acceptable - use of the VM_DMA_COHERENT for something that is not the dma-mapping code - use of VM_FLUSH_RESET_PERMS for vmap, while it is only supported for vmalloc Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117085840.32356-6-quic_sibis@quicinc.com
2023-01-18remoteproc: qcom_q6v5_pas: add sm8550 adsp, cdsp & mpss compatible & dataNeil Armstrong1-0/+63
This adds the compatible & data for the aDSP, cDSP and MPSS found in the SM8550 SoC. This platform requires the "Devicetree" firmware to be loaded along the main firmware. The MPSS DSM memory to be assigned to the MPSS subsystem is the third memory-region entry as defined in the bindings. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-remoteproc-v4-5-54154c08c0b7@linaro.org
2023-01-18remoteproc: qcom_q6v5_pas: add support for assigning memory to firmwareNeil Armstrong1-0/+71
Starting with SM8550, the DSM memory must now be shared to the firmware by the APPS process instead of being defined in the carveout memory reserved for MPSS. In order to handle that, add a region_assign_idx in adsp_data to specify with index of memory-region must be assigned to the MPSS via the qcom_scm_assign_mem() call at probe time. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-remoteproc-v4-4-54154c08c0b7@linaro.org
2023-01-18remoteproc: qcom_q6v5_pas: add support for dtb co-firmware loadingNeil Armstrong1-13/+121
Starting from the SM8550 SoC, starting the aDSP, cDSP and MPSS will require loading a separate "Devicetree" firmware. In order to satisfy the load & authentication order required by the SM8550 SoC, the following is implemented: - "Devicetree" firmware request & load in dedicated memory - Q6V5 prepare - Power Domain & Clocks enable - "Devicetree" firmware authentication - Main firmware load in dedicated memory - Main firmware authentication - Q6V5 startup - "Devicetree" firmware metadata release - Main metadata release When booting older platforms, the "Devicetree" steps would be bypassed and the load & authentication order would still be valid. Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-remoteproc-v4-3-54154c08c0b7@linaro.org
2023-01-14remoteproc: k3-c7x: Add support for C7xv DSP on AM62A SoCJai Luthra1-0/+12
Add support to the K3 DSP remoteproc driver to configure the C7xv subsystem core on AM62A SoCs. The C7xv susbsytem is based on C71 DSP with anlytics engine for deep learning purposes. The remoteproc handling for device management is similar to the C66/C71 DSPs on K3 J7 family SoCs, even though there are additional hardware accelerators and IP updates to C7xv subsystem. Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Hari Nagalla <hnagalla@ti.com> Link: https://lore.kernel.org/r/20221230132453.32022-3-hnagalla@ti.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-01-06remoteproc: pru: Configure firmware based on client setupTero Kristo1-0/+34
Client device node property firmware-name is now used to configure firmware for the PRU instances. The default firmware is also restored once releasing the PRU resource. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20230106121046.886863-7-danishanwar@ti.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-01-06remoteproc: pru: Add pru_rproc_set_ctable() functionRoger Quadros1-0/+59
Some firmwares expect the OS drivers to configure the CTABLE entries publishing dynamically allocated memory regions. For example, the PRU Ethernet firmwares use the C28 and C30 entries for retrieving the Shared RAM and System SRAM (OCMC) areas allocated by the PRU Ethernet client driver. Provide a way for users to do that through a new API, pru_rproc_set_ctable(). The API returns 0 on success and a negative value on error. NOTE: The programmable CTABLE entries are typically re-programmed by the PRU firmwares when dealing with a certain block of memory during block processing. This API provides an interface to the PRU client drivers to publish a dynamically allocated memory block with the PRU firmware using a CTABLE entry instead of a negotiated address in shared memory. Additional synchronization may be needed between the PRU client drivers and firmwares if different addresses needs to be published at run-time reusing the same CTABLE entry. CTABLE for stands for "constant table". Each CTable entry just holds the upper address bits so PRU can reference to external memory with larger address bits. For use case please see prueth_sw_emac_config() in "drivers/net/ethernet/ti/prueth_switch.c" /* Set in constant table C28 of PRUn to ICSS Shared memory */ pru_rproc_set_ctable(prueth->pru0, PRU_C28, sharedramaddr); pru_rproc_set_ctable(prueth->pru1, PRU_C28, sharedramaddr); /* Set in constant table C30 of PRUn to OCMC memory */ pru_rproc_set_ctable(prueth->pru0, PRU_C30, ocmcaddr); pru_rproc_set_ctable(prueth->pru1, PRU_C30, ocmcaddr); Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Link: https://lore.kernel.org/r/20230106121046.886863-6-danishanwar@ti.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-01-06remoteproc: pru: Make sysfs entries read-only for PRU client driven bootsSuman Anna1-0/+2
The PRU remoteproc driver is not configured for 'auto-boot' by default, and allows to be booted either by in-kernel PRU client drivers or by userspace using the generic remoteproc sysfs interfaces. The sysfs interfaces should not be permitted to change the remoteproc firmwares or states when a PRU is being managed by an in-kernel client driver. Use the newly introduced remoteproc generic 'sysfs_read_only' flag to provide these restrictions by setting and clearing it appropriately during the PRU acquire and release steps. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20230106121046.886863-5-danishanwar@ti.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-01-06remoteproc: pru: Add APIs to get and put the PRU coresMD Danish Anwar1-2/+126
Add two new APIs, pru_rproc_get() and pru_rproc_put(), to the PRU driver to allow client drivers to acquire and release the remoteproc device associated with a PRU core. The PRU cores are treated as resources with only one client owning it at a time. The pru_rproc_get() function returns the rproc handle corresponding to a PRU core identified by the device tree "ti,prus" property under the client node. The pru_rproc_put() is the complementary function to pru_rproc_get(). Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20230106121046.886863-4-danishanwar@ti.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-01-06remoteproc: pru: Add enum for PRU Core Identifiers.MD Danish Anwar1-3/+4
Introducing enum pruss_pru_id for PRU Core Identifiers. PRUSS_PRU0 indicates PRU Core 0. PRUSS_PRU1 indicates PRU Core 1. PRUSS_NUM_PRUS indicates the total number of PRU Cores. Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20230106121046.886863-3-danishanwar@ti.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-01-05remoteproc/mtk_scp: Remove timeout variable from scp_ipi_send()AngeloGioacchino Del Regno1-3/+1
That variable was used twice, but now it's just used once to store msecs_to_jiffies(wait), fed to wait_event_timeout(): we might as well remove it for the sake of cleaning up. This brings no functional changes. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230104115341.320951-3-angelogioacchino.delregno@collabora.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-01-05remoteproc/mtk_scp: Use readl_poll_timeout_atomic() for pollingAngeloGioacchino Del Regno1-8/+11
Convert the usage of an open-coded custom tight poll while loop with the provided readl_poll_timeout_atomic() macro. This cleanup brings no functional change. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230104115341.320951-2-angelogioacchino.delregno@collabora.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-01-05remoteproc/mtk_scp: Move clk ops outside send_lockChen-Yu Tsai1-6/+5
Clocks are properly reference counted and do not need to be inside the lock range. Right now this triggers a false-positive lockdep warning on MT8192 based Chromebooks, through a combination of mtk-scp that has a cros-ec-rpmsg sub-device, the (actual) cros-ec I2C adapter registration, I2C client (not on cros-ec) probe doing i2c transfers and enabling clocks. This is a false positive because the cros-ec-rpmsg under mtk-scp does not have an I2C adapter, and also each I2C adapter and cros-ec instance have their own mutex. Move the clk operations outside of the send_lock range. Fixes: 63c13d61eafe ("remoteproc/mediatek: add SCP support for mt8183") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230104083110.736377-1-wenst@chromium.org [Fixed "Fixes:" tag line] Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-12-28remoteproc: qcom: pas: Fix subdevice add orderMukesh Ojha1-1/+1
Currently, the notification like QCOM_SSR_BEFORE_SHUTDOWN is not exactly sent before starting shutdown activity on remote subsystem but it is getting sent after sysmon shutdown request to remote. On getting QCOM_SSR_BEFORE_SHUTDOWN, some client want remote subsystem to be alive to communicate but as sysmon shutdown request is getting sent to remote before QCOM_SSR_BEFORE_SHUTDOWN notification sent to kernel client due to which remote is not in a condition to communicate with kernel clients. Fixing the subdevice ordering will fix this as ssr subdevice will be first one to get triggered in shutdown/stop path. Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1671024983-22634-1-git-send-email-quic_mojha@quicinc.com
2022-12-28remoteproc: qcom: pas: Add MSM8953 ADSP PIL supportSireesh Kodali1-0/+1
Add support for the Audio DSP PIL found on the Qualcomm MSM8953 platform. The same configuration is used on all SoCs based on the MSM8953 platform (SDM450, SDA450, SDM625, SDM632, APQ8053). Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221013042749.104668-2-sireeshkodali1@gmail.com
2022-12-28remoteproc: qcom: Add support for memory sandboxSrinivasa Rao Mandadapu1-1/+55
Update pil driver with SMMU mapping for allowing authorised memory access to ADSP firmware, by carveout reserved adsp memory region from device tree file. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1664368073-13659-8-git-send-email-quic_srivasam@quicinc.com
2022-12-28remoteproc: qcom: Add efuse evb selection controlSrinivasa Rao Mandadapu1-0/+17
Add efuse evb selection control and enable it for starting ADSP. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1664368073-13659-7-git-send-email-quic_srivasam@quicinc.com
2022-12-28remoteproc: qcom: Replace hard coded values with macrosSrinivasa Rao Mandadapu1-2/+5
Replace hard coded values of QDSP6 boot control reg params with appropriate macro names. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1664368073-13659-6-git-send-email-quic_srivasam@quicinc.com
2022-12-28remoteproc: qcom: Update rproc parse firmware callbackSrinivasa Rao Mandadapu1-1/+22
Change parse_fw callback in rproc ops from qcom_register_dump_segments to local function such that, it can perform coredump segments registration and it can parse section header in memory sandboxing required platforms. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1664368073-13659-5-git-send-email-quic_srivasam@quicinc.com
2022-12-28remoteproc: qcom: Add compatible name for SC7280 ADSPSrinivasa Rao Mandadapu1-0/+16
Update adsp pil data and compatible name for loading ADSP binary on SC7280 based platforms. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1664368073-13659-4-git-send-email-quic_srivasam@quicinc.com
2022-12-28remoteproc: qcom: Add flag in adsp private data structureSrinivasa Rao Mandadapu1-0/+5
Add flag in qcom_adsp private data structure and initialize it to distinguish ADSP modules, which has iommu requirement, for using iommu selectively. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1664368073-13659-3-git-send-email-quic_srivasam@quicinc.com
2022-12-28remoteproc: qcom: q6v5: Avoid setting smem bit in case of crash shutdownGokul krishna Krishnakumar1-2/+2
Avoid setting smem bit in case of crash shutdown, as remote processor is not able to send the ack back. Signed-off-by: Gokul krishna Krishnakumar <quic_gokukris@quicinc.com> [bjorn: Rewrote the comment] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/9e549a54e2a6ede3e413de933fd1725c660993c3.1662995608.git.quic_gokukris@quicinc.com
2022-12-28remoteproc: qcom: wcnss: remove unused qcom_iris_driver declarationGaosheng Cui1-2/+0
qcom_iris_driver has been removed since commit 1fcef985c8bd ("remoteproc: qcom: wcnss: Fix race with iris probe"), so remove it. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220911090637.3208939-1-cuigaosheng1@huawei.com
2022-12-28remoteproc: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220818210059.7253-1-wsa+renesas@sang-engineering.com
2022-12-28remoteproc: qcom: q6v5: Use _clk_get_optional for aggre2_clkAbel Vesa1-35/+7
Only msm8996 and msm8998 SLPIs need the RPM_SMD_AGGR2_NOC_CLK (as aggre2 clock). None of the other platforms do. Back when the support for the mentioned platforms was added to the q6v5 pass driver, the devm_clk_get_optional was not available, so the has_aggre2_clk was necessary in order to differentiate between plaforms that need this clock and those which do not. Now that devm_clk_get_optional is available, we can drop the has_aggre2_clk. This makes the adsp_data more cleaner and removes the check within adsp_init_clocks. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220718121514.2451590-1-abel.vesa@linaro.org
2022-12-27remoteproc: qcom: qcom_wcnss: Add support for pronto-v3Vladimir Lypak1-0/+12
Pronto-v3 is similar to pronto-v2. It requires two power domains, one regulator, and it requires the xo clock. It is used on the MSM8953 platform. Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221001031345.31293-2-sireeshkodali1@gmail.com
2022-12-27remoteproc: qcom: q6v5-mss: Add modem support on MSM8953Sireesh Kodali1-2/+53
The modem on the MSM8953 platform is similar to the modem on the MSM8996 platform in terms of set up. It differs primarily in that TZ needs to be informed of the modem start address and pas_id. Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com> Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220908182433.466908-8-stephan.gerhold@kernkonzept.com
2022-12-27remoteproc: qcom: q6v5-mss: Add support for MSM8909Stephan Gerhold1-33/+90
Port the initialization sequence necessary for booting the modem remote processor on the MSM8909 SoC from Qualcomm's msm-3.10 release [1]. The sequence is actually similar to the existing one for MSM8996 and MSM8998 except that there is no separate QDSP6SS_MEM_PWR_CTL register and most of the "memories" are enabled at once instead of sequentially. To reuse the existing code just insert some if statements where needed and add a configuration similar to the one from MSM8916. [1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/commit/56dcedc8dac8abff6b007f76a29430b2d0a44704 Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220908182433.466908-6-stephan.gerhold@kernkonzept.com
2022-12-07remoteproc: core: Do pm_relax when in RPROC_OFFLINE stateMaria Yu1-1/+8
Make sure that pm_relax() happens even when the remoteproc is stopped before the crash handler work is scheduled. Signed-off-by: Maria Yu <quic_aiquny@quicinc.com> Cc: stable <stable@vger.kernel.org> Fixes: a781e5aa5911 ("remoteproc: core: Prevent system suspend during remoteproc recovery") Link: https://lore.kernel.org/r/20221206015957.2616-2-quic_aiquny@quicinc.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2022-12-07remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in ↵Shang XiaoJing1-1/+2
q6v5_wcss_qcs404_power_on() q6v5_wcss_qcs404_power_on() have no fail path for readl_poll_timeout(). Add fail path for readl_poll_timeout(). Fixes: 0af65b9b915e ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221204082757.18850-1-shangxiaojing@huawei.com
2022-12-07remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in ↵Yuan Can1-0/+1
adsp_alloc_memory_region() The pointer node is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: b9e718e950c3 ("remoteproc: Introduce Qualcomm ADSP PIL") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221203070639.15128-1-yuancan@huawei.com
2022-12-07remoteproc: qcom_q6v5_pas: detach power domains on removeLuca Weiss1-0/+1
We need to detach from the power domains also on remove, not just on probe fail so a subsequent probe works as expected. Otherwise the following error appears on re-probe: [ 29.452005] sysfs: cannot create duplicate filename '/devices/genpd:0:3000000.remoteproc' [ 29.477121] CPU: 1 PID: 483 Comm: sh Tainted: G W 6.1.0-rc4-00075-g71a113770bda #78 [ 29.510319] Hardware name: Fairphone 4 (DT) [ 29.538335] Call trace: [ 29.564470] dump_backtrace.part.0+0xe0/0xf0 [ 29.592602] show_stack+0x18/0x30 [ 29.619616] dump_stack_lvl+0x64/0x80 [ 29.646834] dump_stack+0x18/0x34 [ 29.673541] sysfs_warn_dup+0x60/0x7c [ 29.700592] sysfs_create_dir_ns+0xec/0x110 [ 29.728057] kobject_add_internal+0xb8/0x374 [ 29.755530] kobject_add+0x9c/0x104 [ 29.782072] device_add+0xbc/0x8a0 [ 29.808445] device_register+0x20/0x30 [ 29.835175] genpd_dev_pm_attach_by_id+0xa4/0x190 [ 29.862851] genpd_dev_pm_attach_by_name+0x3c/0xb0 [ 29.890472] dev_pm_domain_attach_by_name+0x20/0x30 [ 29.918212] adsp_probe+0x278/0x580 [ 29.944384] platform_probe+0x68/0xc0 [ 29.970603] really_probe+0xbc/0x2dc [ 29.996662] __driver_probe_device+0x78/0xe0 [ 30.023491] device_driver_attach+0x48/0xac [ 30.050215] bind_store+0xb8/0x114 [ 30.075957] drv_attr_store+0x24/0x3c [ 30.101874] sysfs_kf_write+0x44/0x54 [ 30.127751] kernfs_fop_write_iter+0x120/0x1f0 [ 30.154448] vfs_write+0x1ac/0x380 [ 30.179937] ksys_write+0x70/0x104 [ 30.205274] __arm64_sys_write+0x1c/0x2c [ 30.231060] invoke_syscall+0x48/0x114 [ 30.256594] el0_svc_common.constprop.0+0x44/0xec [ 30.283183] do_el0_svc+0x2c/0xd0 [ 30.308320] el0_svc+0x2c/0x84 [ 30.333059] el0t_64_sync_handler+0xf4/0x120 [ 30.359001] el0t_64_sync+0x18c/0x190 [ 30.384385] kobject_add_internal failed for genpd:0:3000000.remoteproc with -EEXIST, don't try to register things with the same name in the same directory. [ 30.406029] remoteproc remoteproc0: releasing 3000000.remoteproc [ 30.416064] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17 Fixes: 17ee2fb4e856 ("remoteproc: qcom: pas: Vote for active/proxy power domains") Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221118090816.100012-2-luca.weiss@fairphone.com
2022-12-07remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or removeLuca Weiss1-0/+2
Leaving wakeup enabled during probe fail (-EPROBE_DEFER) or remove makes the subsequent probe fail. [ 3.749454] remoteproc remoteproc0: releasing 3000000.remoteproc [ 3.752949] qcom_q6v5_pas: probe of 3000000.remoteproc failed with error -17 [ 3.878935] remoteproc remoteproc0: releasing 4080000.remoteproc [ 3.887602] qcom_q6v5_pas: probe of 4080000.remoteproc failed with error -17 [ 4.319552] remoteproc remoteproc0: releasing 8300000.remoteproc [ 4.332716] qcom_q6v5_pas: probe of 8300000.remoteproc failed with error -17 Fix this by disabling wakeup in both cases so the driver can properly probe on the next try. Fixes: a781e5aa5911 ("remoteproc: core: Prevent system suspend during remoteproc recovery") Fixes: dc86c129b4fb ("remoteproc: qcom: pas: Mark devices as wakeup capable") Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221118090816.100012-1-luca.weiss@fairphone.com
2022-12-07remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()Shang XiaoJing1-0/+3
q6v5_wcss_init_mmio() will call platform_get_resource_byname() that may fail and return NULL. devm_ioremap() will use res->start as input, which may causes null-ptr-deref. Check the ret value of platform_get_resource_byname() to avoid the null-ptr-deref. Fixes: 0af65b9b915e ("remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221125021641.29392-1-shangxiaojing@huawei.com
2022-12-07remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()Gaosheng Cui1-1/+4
The kfree() should be called when of_irq_get_byname() fails or devm_request_threaded_irq() fails in qcom_add_sysmon_subdev(), otherwise there will be a memory leak, so add kfree() to fix it. Fixes: 027045a6e2b7 ("remoteproc: qcom: Add shutdown-ack irq") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221129105650.1539187-1-cuigaosheng1@huawei.com
2022-12-07remoteproc: sysmon: Make QMI message rules constJeff Johnson1-4/+4
Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for sysmon. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220914234705.28405-3-quic_jjohnson@quicinc.com
2022-11-25drivers: remoteproc: Add Xilinx r5 remoteproc driverTanmay Shah3-0/+1081
This driver enables r5f dual core Real time Processing Unit subsystem available on Xilinx Zynq Ultrascale MPSoC Platform. RPU subsystem (cluster) can be configured in different modes e.g. split mode in which two r5f cores work independent of each other and lock-step mode in which both r5f cores execute same code clock-for-clock and notify if the result is different. The Xilinx r5 Remoteproc Driver boots the RPU cores via calls to the Xilinx Platform Management Unit that handles the R5 configuration, memory access and R5 lifecycle management. The interface to this manager is done in this driver via zynqmp_pm_* function calls. Signed-off-by: Ben Levinsky <ben.levinsky@amd.com> Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20221114233940.2096237-7-tanmay.shah@amd.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>