summaryrefslogtreecommitdiff
path: root/drivers/rpmsg
AgeCommit message (Collapse)AuthorFilesLines
2012-07-27Merge tag 'remoteproc-for-3.6' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc Pull remoteproc update from Ohad Ben-Cohen: - custom binary format support from Sjur Brændeland - groundwork for recovery and runtime pm support - some cleanups and API simplifications Fix up conflicts in drivers/remoteproc/remoteproc_core.c due to clashes with earlier cleanups by Sjur Brændeland (with part of the cleanups moved into the new remoteproc_elf_loader.c file). * tag 'remoteproc-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc: MAINTAINERS: add remoteproc's git remoteproc: Support custom firmware handlers remoteproc: Move Elf related functions to separate file remoteproc: Add function rproc_get_boot_addr remoteproc: Pass struct fw to load_segments and find_rsc_table. remoteproc: adopt the driver core's alloc/add/del/put naming remoteproc: remove the get_by_name/put API remoteproc: support non-iommu carveout assignment remoteproc: simplify unregister/free interfaces remoteproc: remove the now-redundant kref remoteproc: maintain a generic child device for each rproc remoteproc: allocate vrings on demand, free when not needed
2012-07-17rpmsg: fix dependency on initialization orderFederico Fuga1-1/+1
When rpmsg drivers are built into the kernel, they must not initialize before the rpmsg bus does, otherwise they'd trigger a BUG() in drivers/base/driver.c line 169 (driver_register()). To fix that, and to stop depending on arbitrary linkage ordering of those built-in rpmsg drivers, we make the rpmsg bus initialize at subsys_initcall. Cc: stable <stable@vger.kernel.org> Signed-off-by: Federico Fuga <fuga@studiofuga.com> [ohad: rewrite the commit log] Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-06remoteproc: maintain a generic child device for each rprocOhad Ben-Cohen1-1/+2
For each registered rproc, maintain a generic remoteproc device whose parent is the low level platform-specific device (commonly a pdev, but it may certainly be any other type of device too). With this in hand, the resulting device hierarchy might then look like: omap-rproc.0 | - remoteproc0 <---- new ! | - virtio0 | - virtio1 | - rpmsg0 | - rpmsg1 | - rpmsg2 Where: - omap-rproc.0 is the low level device that's bound to the driver which invokes rproc_register() - remoteproc0 is the result of this patch, and will be added by the remoteproc framework when rproc_register() is invoked - virtio0 and virtio1 are vdevs that are registered by remoteproc when it realizes that they are supported by the firmware of the physical remote processor represented by omap-rproc.0 - rpmsg0, rpmsg1 and rpmsg2 are rpmsg devices that represent rpmsg channels, and are registerd by the rpmsg bus when it gets notified about their existence Technically, this patch: - changes 'struct rproc' to contain this generic remoteproc.x device - creates a new "remoteproc" type, to which this new generic remoteproc.x device belong to. - adds a super simple enumeration method for the indices of the remoteproc.x devices - updates all dev_* messaging to use the generic remoteproc.x device instead of the low level platform-specific device - updates all dma_* allocations to use the parent of remoteproc.x (where the platform-specific memory pools, most commonly CMA, are to be found) Adding this generic device has several merits: - we can now add remoteproc runtime PM support simply by hooking onto the new "remoteproc" type - all remoteproc log messages will now carry a common name prefix instead of having a platform-specific one - having a device as part of the rproc struct makes it possible to simplify refcounting (see subsequent patch) Thanks to Stephen Boyd <sboyd@codeaurora.org> for suggesting and discussing these ideas in one of the remoteproc review threads and to Fernando Guzman Lugo <fernando.lugo@ti.com> for trying them out with the (upcoming) runtime PM support for remoteproc. Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-04rpmsg: make sure inflight messages don't invoke just-removed callbacksOhad Ben-Cohen1-6/+19
When inbound messages arrive, rpmsg core looks up their associated endpoint (by destination address) and then invokes their callback. We've made sure that endpoints will never be de-allocated after they were found by rpmsg core, but we also need to protect against the (rare) scenario where the rpmsg driver was just removed, and its callback function isn't available anymore. This is achieved by introducing a callback mutex, which must be taken before the callback is invoked, and, obviously, before it is removed. Cc: stable <stable@vger.kernel.org> Reported-by: Fernando Guzman Lugo <fernando.lugo@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-07-04rpmsg: avoid premature deallocation of endpointsOhad Ben-Cohen1-2/+34
When an inbound message arrives, the rpmsg core looks up its associated endpoint and invokes the registered callback. If a message arrives while its endpoint is being removed (because the rpmsg driver was removed, or a recovery of a remote processor has kicked in) we must ensure atomicity, i.e.: - Either the ept is removed before it is found or - The ept is found but will not be freed until the callback returns This is achieved by maintaining a per-ept reference count, which, when drops to zero, will trigger deallocation of the ept. With this in hand, it is now forbidden to directly deallocate epts once they have been added to the endpoints idr. Cc: stable <stable@vger.kernel.org> Reported-by: Fernando Guzman Lugo <fernando.lugo@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-03-04rpmsg: fix build warning when dma_addr_t is 64-bitMark Asselstine1-2/+2
dev_dbg() in rpmsg_probe() made use of the %x formatting that expects an 'unsigned int' which dma_addr_t is not in cases where dma_addr_t is 64-bit (CONFIG_ARCH_DMA_ADDR_T_64BIT). Casting to a 'unsigned long long' and using %llx will avoid this. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> CC: Ohad Ben-Cohen <ohad@wizery.com> CC: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-02-28rpmsg: fix published buffer length in rpmsg_recv_doneOhad Ben-Cohen1-1/+2
After processing an incoming message, always publish the real size of its containing buffer when putting it back on the available rx ring. Using any different value might erroneously limit the remote processor (leading it to think the buffer is smaller than it really is). Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Grosen <mgrosen@ti.com> Cc: Suman Anna <s-anna@ti.com> Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Cc: Rob Clark <rob@ti.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org>
2012-02-28rpmsg: validate incoming message length before propagatingOhad Ben-Cohen1-0/+10
When an inbound message arrives, validate its reported length before propagating it, otherwise buggy (or malicious) remote processors might trick us into accessing memory which we really shouldn't. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Grosen <mgrosen@ti.com> Cc: Suman Anna <s-anna@ti.com> Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Cc: Rob Clark <rob@ti.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Omar Ramirez Luna <omar.luna@linaro.org>
2012-02-28rpmsg: fix name service endpoint leakOhad Ben-Cohen1-6/+23
The name service endpoint wasn't destroyed, so fix it. This is achieved by introducing an internal __rpmsg_destroy_ept function which doesn't assume the given ept is bound to an rpmsg channel (much like the existing __rpmsg_create_ept). This is needed because the name service ept belongs to the rpmsg bus, and is never bound with a specific rpdev. Reported-by: Omar Ramirez Luna <omar.ramirez@ti.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mark Grosen <mgrosen@ti.com> Cc: Suman Anna <s-anna@ti.com> Cc: Fernando Guzman Lugo <fernando.lugo@ti.com> Cc: Rob Clark <rob@ti.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com> Cc: Loic PALLARDY <loic.pallardy@stericsson.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
2012-02-22rpmsg: rename virtqueue_add_buf_gfp to virtqueue_add_bufAxel Lin1-4/+4
Since commit 7bb7aef2 "virtio: rename virtqueue_add_buf_gfp to virtqueue_add_buf", virtqueue_add_buf_gfp is already rename to virtqueue_add_buf now. This patch fixes below build error: CC [M] drivers/rpmsg/virtio_rpmsg_bus.o drivers/rpmsg/virtio_rpmsg_bus.c: In function 'rpmsg_send_offchannel_raw': drivers/rpmsg/virtio_rpmsg_bus.c:723: error: implicit declaration of function 'virtqueue_add_buf_gfp' make[2]: *** [drivers/rpmsg/virtio_rpmsg_bus.o] Error 1 make[1]: *** [drivers/rpmsg] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-02-22rpmsg: depend on EXPERIMENTALOhad Ben-Cohen1-1/+2
There isn't any binary change in sight or evidence of any stability issue, but as we just begin to get traction we can't rule them out completely. To be on the safe side, let's mark rpmsg as EXPERIMENTAL, and remove it later on after we have several happy users. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rob Clark <rob@ti.com> Cc: Mark Grosen <mgrosen@ti.com> Cc: Ludovic BARRE <ludovic.barre@stericsson.com>
2012-02-09rpmsg: add Kconfig menuOhad Ben-Cohen1-0/+4
Add a dedicated Kconfig menu for the rpmsg drivers, so they don't show up in the main driver menu. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
2012-02-09rpmsg: add virtio-based remote processor messaging busOhad Ben-Cohen3-0/+1032
Add a virtio-based inter-processor communication bus, which enables kernel drivers to communicate with entities, running on remote processors, over shared memory using a simple messaging protocol. Every pair of AMP processors share two vrings, which are used to send and receive the messages over shared memory. The header of every message sent on the rpmsg bus contains src and dst addresses, which make it possible to multiplex several rpmsg channels on the same vring. Every rpmsg channel is a device on this bus. When a channel is added, and an appropriate rpmsg driver is found and probed, it is also assigned a local rpmsg address, which is then bound to the driver's callback. When inbound messages carry the local address of a bound driver, its callback is invoked by the bus. This patch provides a kernel interface only; user space interfaces will be later exposed by kernel users of this rpmsg bus. Designed with Brian Swetland <swetland@google.com>. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> (virtio_ids.h) Cc: Brian Swetland <swetland@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Stephen Boyd <sboyd@codeaurora.org>