summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2019-05-21dax: Arrange for dax_supported check to span multiple devicesDan Williams1-0/+1
Pankaj reports that starting with commit ad428cdb525a "dax: Check the end of the block-device capacity with dax_direct_access()" device-mapper no longer allows dax operation. This results from the stricter checks in __bdev_dax_supported() that validate that the start and end of a block-device map to the same 'pagemap' instance. Teach the dax-core and device-mapper to validate the 'pagemap' on a per-target basis. This is accomplished by refactoring the bdev_dax_supported() internals into generic_fsdax_supported() which takes a sector range to validate. Consequently generic_fsdax_supported() is suitable to be used in a device-mapper ->iterate_devices() callback. A new ->dax_supported() operation is added to allow composite devices to split and route upper-level bdev_dax_supported() requests. Fixes: ad428cdb525a ("dax: Check the end of the block-device...") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Pankaj Gupta <pagupta@redhat.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-05-17Merge tag 's390-5.2-2' of ↵Linus Torvalds3-32/+11
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Martin Schwidefsky: - Enhancements for the QDIO layer - Remove the RCP trace event - Avoid three build issues - Move the defconfig to the configs directory * tag 's390-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: move arch/s390/defconfig to arch/s390/configs/defconfig s390/qdio: optimize state inspection of HW-owned SBALs s390/qdio: use get_buf_state() in debug_get_buf_state() s390/qdio: allow to scan all Output SBALs in one go s390/cio: Remove tracing for rchp instruction s390/kasan: adapt disabled_wait usage to avoid build error latent_entropy: avoid build error when plugin cflags are not set s390/boot: fix compiler error due to missing awk strtonum
2019-05-17Merge tag 'for-5.2/block-post-20190516' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull more block updates from Jens Axboe: "This is mainly some late lightnvm changes that came in just before the merge window, as well as fixes that have been queued up since the initial pull request was frozen. This contains: - lightnvm changes, fixing race conditions, improving memory utilization, and improving pblk compatability (Chansol, Igor, Marcin) - NVMe pull request with minor fixes all over the map (via Christoph) - remove redundant error print in sata_rcar (Geert) - struct_size() cleanup (Jackie) - dasd CONFIG_LBADF warning fix (Ming) - brd cond_resched() improvement (Mikulas)" * tag 'for-5.2/block-post-20190516' of git://git.kernel.dk/linux-block: (41 commits) block/bio-integrity: use struct_size() in kmalloc() nvme: validate cntlid during controller initialisation nvme: change locking for the per-subsystem controller list nvme: trace all async notice events nvme: fix typos in nvme status code values nvme-fabrics: remove unused argument nvme-multipath: avoid crash on invalid subsystem cntlid enumeration nvme-fc: use separate work queue to avoid warning nvme-rdma: remove redundant reference between ib_device and tagset nvme-pci: mark expected switch fall-through nvme-pci: add known admin effects to augument admin effects log page nvme-pci: init shadow doorbell after each reset brd: add cond_resched to brd_free_pages sata_rcar: Remove ata_host_alloc() error printing s390/dasd: fix build warning in dasd_eckd_build_cp_raw lightnvm: pblk: use nvm_rq_to_ppa_list() lightnvm: pblk: simplify partial read path lightnvm: do not remove instance under global lock lightnvm: track inflight target creations lightnvm: pblk: recover only written metadata ...
2019-05-15Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-27/+25
Pull virtio updates from Michael Tsirkin: - enable packed ring support for s390 - several fixes * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio/s390: enable packed ring virtio/s390: DMA support for virtio-ccw virtio/s390: use vring_create_virtqueue virtio/virtio_ring: do some comment fixes vhost-scsi: remove incorrect memory barrier tools/virtio/ringtest: Remove bogus definition of BUG_ON() virtio_ring: Fix potential mem leak in virtqueue_add_indirect_packed
2019-05-12virtio/s390: enable packed ringHalil Pasic1-3/+1
Nothing precludes to accepting VIRTIO_F_RING_PACKED any more. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2019-05-12virtio/s390: DMA support for virtio-ccwHalil Pasic1-7/+15
Currently virtio-ccw devices do not work if the device has VIRTIO_F_IOMMU_PLATFORM. In future we do want to support DMA API with virtio-ccw. Let us do the plumbing, so the feature VIRTIO_F_IOMMU_PLATFORM works with virtio-ccw. Let us also switch from legacy avail/used accessors to the DMA aware ones (even if it isn't strictly necessary), and remove the legacy accessors (we were the last users). Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2019-05-12virtio/s390: use vring_create_virtqueueHalil Pasic1-19/+11
The commit 2a2d1382fe9d ("virtio: Add improved queue allocation API") establishes a new way of allocating virtqueues (as a part of the effort that taught DMA to virtio rings). In the future we will want virtio-ccw to use the DMA API as well. Let us switch from the legacy method of allocating virtqueues to vring_create_virtqueue() as the first step into that direction. Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2019-05-09s390/dasd: fix build warning in dasd_eckd_build_cp_rawMing Lei1-1/+1
Commit 72deb455b5ec619f ("block: remove CONFIG_LBDAF") changes sector_t to u64 unconditionaly, so apply '%llu' for print sector_t variable. Fixes: 72deb455b5ec619f ("block: remove CONFIG_LBDAF") Cc: linux-s390@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-08s390/qdio: optimize state inspection of HW-owned SBALsJulian Wiedmann1-2/+9
When get_buf_states() gets called with count > 1, it scans the corresponding number of SBAL states until it encounters a mismatch. But when these SBALs are in a HW-owned state, the callers don't actually care _how many_ such SBALs are on the queue. If we can't process the first SBAL, we can't process any of the following SBALs either. So when the first SBAL is HW-owned, skip the scan of the remaining SBALs and thus save some CPU time. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-05-08s390/qdio: use get_buf_state() in debug_get_buf_state()Julian Wiedmann1-1/+1
For a 1-SBAL state inspection, use the corresponding helper. No functional change, just reducing the number of immediate callers to get_buf_states(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-05-08s390/qdio: allow to scan all Output SBALs in one goJulian Wiedmann1-5/+1
Old code restricted the number of inspected SBALs to QDIO_MAX_BUFFERS_PER_Q - 1, as otherwise the first_to_check and first_to_kick cursors could overlap. Subsequent code would then assume that there was no progress on the queue, when in fact _all_ SBALs on the queue were ready-to-process. This limitation no longer applies, so allow the queue-scan code to inspect all SBALs on the queue. Note that qeth requires an additional patch ("s390/qeth: stop/wake TX queues based on their fill level"), to avoid potential queue stalls when all 128 SBALs are reported as ready-to-process. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-05-08s390/cio: Remove tracing for rchp instructionFarhan Ali2-24/+0
Since commit d485235b00 "s390: assume diag308 set always works", the kernel does not use the rchp instruction anymore. So let's remove the tracing for it. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-05-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds8-685/+782
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-05-07Merge tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linuxLinus Torvalds4-4/+4
Pull stream_open conversion from Kirill Smelkov: - remove unnecessary double nonseekable_open from drivers/char/dtlk.c as noticed by Pavel Machek while reviewing nonseekable_open -> stream_open mass conversion. - the mass conversion patch promised in commit 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock") and is automatically generated by running $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. More details on this in the patch. - finally, change VFS to pass ppos=NULL into .read/.write for files that declare themselves streams. It was suggested by Rasmus Villemoes and makes sure that if ppos starts to be erroneously used in a stream file, such bug won't go unnoticed and will produce an oops instead of creating illusion of position change being taken into account. Note: this patch does not conflict with "fuse: Add FOPEN_STREAM to use stream_open()" that will be hopefully coming via FUSE tree, because fs/fuse/ uses new-style .read_iter/.write_iter, and for these accessors position is still passed as non-pointer kiocb.ki_pos . * tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux: vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files *: convert stream-like files from nonseekable_open -> stream_open dtlk: remove double call to nonseekable_open
2019-05-07Merge tag 's390-5.2-1' of ↵Linus Torvalds28-281/+816
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - Support for kernel address space layout randomization - Add support for kernel image signature verification - Convert s390 to the generic get_user_pages_fast code - Convert s390 to the stack unwind API analog to x86 - Add support for CPU directed interrupts for PCI devices - Provide support for MIO instructions to the PCI base layer, this will allow the use of direct PCI mappings in user space code - Add the basic KVM guest ultravisor interface for protected VMs - Add AT_HWCAP bits for several new hardware capabilities - Update the CPU measurement facility counter definitions to SVN 6 - Arnds cleanup patches for his quest to get LLVM compiles working - A vfio-ccw update with bug fixes and support for halt and clear - Improvements for the hardware TRNG code - Another round of cleanup for the QDIO layer - Numerous cleanups and bug fixes * tag 's390-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (98 commits) s390/vdso: drop unnecessary cc-ldoption s390: fix clang -Wpointer-sign warnigns in boot code s390: drop CONFIG_VIRT_TO_BUS s390: boot, purgatory: pass $(CLANG_FLAGS) where needed s390: only build for new CPUs with clang s390: simplify disabled_wait s390/ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR s390/unwind: introduce stack unwind API s390/opcodes: add missing instructions to the disassembler s390/bug: add entry size to the __bug_table section s390: use proper expoline sections for .dma code s390/nospec: rename assembler generated expoline thunks s390: add missing ENDPROC statements to assembler functions locking/lockdep: check for freed initmem in static_obj() s390/kernel: add support for kernel address space layout randomization (KASLR) s390/kernel: introduce .dma sections s390/sclp: do not use static sccbs s390/kprobes: use static buffer for insn_page s390/kernel: convert SYSCALL and PGM_CHECK handlers to .quad s390/kernel: build a relocatable kernel ...
2019-05-06*: convert stream-like files from nonseekable_open -> stream_openKirill Smelkov4-4/+4
Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com> Cc: Corey Minyard <minyard@acm.org> Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs] Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Johan Hovold <johan@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jean Delvare <jdelvare@suse.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*] Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec] Cc: Benson Leung <bleung@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome] Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*] Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Zwane Mwaikambo <zwanem@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-05-03s390: fix clang -Wpointer-sign warnigns in boot codeArnd Bergmann1-2/+2
The arch/s390/boot directory is built with its own set of compiler options that does not include -Wno-pointer-sign like the rest of the kernel does, this causes a lot of harmless but correct warnings when building with clang. For the atomics, we can add type casts to avoid the warnings, for everything else the easiest way is to slightly adapt the types to be more consistent. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/sclp: do not use static sccbsGerald Schaefer5-51/+61
The sccbs for init/read/sdias/early have to be located below 2 GB, and they are currently defined as a static buffer. With a relocatable kernel that could reside at any place in memory, this will no longer guarantee the location below 2 GB, so use a dynamic GFP_DMA allocation instead. The sclp_early_sccb buffer needs special handling, as it can be used very early, and by both the decompressor and also the decompressed kernel. Therefore, a fixed 4 KB buffer is introduced at 0x11000, the former PARMAREA_END. The new PARMAREA_END is now 0x12000, and it is renamed to HEAD_END, as it is rather the end of head.S and not the end of the parmarea. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/ism: move oddities of device IO to wrapper functionSebastian Ott2-16/+31
ISM devices are special in how they access PCI memory space. Provide wrappers for handling commands to the device. No functional change. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: move io address mapping code to pci_insn.cSebastian Ott1-1/+1
This is a preparation patch for usage of new pci instructions. No functional change. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390: show statistics for MSI IRQsSebastian Ott1-1/+1
Improve /proc/interrupts on s390 to show statistics for individual MSI interrupts. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/airq: provide cacheline aligned ivsSebastian Ott1-5/+34
Provide the ability to create cachesize aligned interrupt vectors. These will be used for per-CPU interrupt vectors. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/airq: recognize directed interruptsSebastian Ott5-7/+7
Add an extra parameter for airq handlers to recognize floating vs. directed interrupts. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/sclp: detect DIRQ facilitySebastian Ott2-1/+2
Detect the adapter CPU directed interruption facility. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/ipl: Provide has_secure sysfs attributePhilipp Rudo2-1/+5
Provide an interface for userspace so it can find out if a machine is capeable of doing secure boot. The interface is, for example, needed for zipl so it can find out which file format it can/should write to disk. Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-26s390/qeth: trust non-IP cast type in qeth_l3_fill_header()Julian Wiedmann1-8/+3
When building the L3 HW header for non-IP packets, trust the cast type that was passed as parameter. qeth_l3_get_cast_type() has most likely also used h_dest to determine the cast type, so we get the same result, and can remove that duplicated code. In the unlikely case that we would get a _different_ cast type, then that's based off a route lookup and should be considered authoritative. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26s390/qeth: extract helper to determine L2 cast typeJulian Wiedmann3-18/+14
This de-duplicates the L2 and L3 cast-type code, and makes the L2 code a bit more robust by removing the fragile assumption that skb->data always points to the Ethernet Header. This would break in code paths where we pushed the HW header onto the skb. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26s390/qeth: cache max number of available buffer elementsJulian Wiedmann3-24/+22
The QETH_MAX_BUFFER_ELEMENTS() macro effectively returns a constant value. To avoid some redundant pointer chasing and computations in the xmit hot path, cache this value in the queue struct. Take this as opportunity to shrink some of the queue struct's fields to their appropriate value range, slightly reducing its total size. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26s390/qeth: don't clear Output buffers on every queue initJulian Wiedmann1-6/+2
On the first initialization of a queue, its Output Buffers are in a clean state with no attached resources. On every subsequent initialization, qeth_l?_stop_card() has previously put them in a clean state via qeth_drain_output_queues(). So the call to qeth_clear_output_buffer() is redundant and can be removed. While at it, move the initialization of the queue's card pointer into the queue allocation. It never changes afterwards. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26s390/qeth: use IS_* helpers for checking device typeJulian Wiedmann7-78/+54
We have helper macros for all possible device types, replace all remaining open-coded accesses to the type fields. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26s390/qeth: clean up stale buffer state documentationJulian Wiedmann1-28/+13
We don't keep track of Input Buffer states, so remove the comments that make it sound like the qeth_qdio_buffer_states enum applies to Input Buffers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26s390/qeth: remove RX seqno in skb->cbJulian Wiedmann2-3/+0
It's unclear what exact purpose this seqno may have served in the past. But it's certainly no longer used anymore, as the following napi_gro_receive() will straight away clear this part of the cb again. Suggested-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26s390: qeth: address type mismatch warningArnd Bergmann1-3/+7
clang produces a harmless warning for each use for the qeth_adp_supported macro: drivers/s390/net/qeth_l2_main.c:559:31: warning: implicit conversion from enumeration type 'enum qeth_ipa_setadp_cmd' to different enumeration type 'enum qeth_ipa_funcs' [-Wenum-conversion] if (qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE)) ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/net/qeth_core.h:179:41: note: expanded from macro 'qeth_adp_supported' qeth_is_ipa_supported(&c->options.adp, f) ~~~~~~~~~~~~~~~~~~~~~ ^ Add a version of this macro that uses the correct types, and remove the unused qeth_adp_enabled() macro that has the same problem. Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26s390/zcore: Rename ipl_block to mitigate name collisionPhilipp Rudo1-10/+12
With git commit 1e941d39493f1820475d80729a03cd7ab8c3c86d "s390: move ipl block to .boot.preserved.data section" the earl_ipl_block got renamed to ipl_block and became publicly available via boot_data.h. This might cause problems with zcore, which has it's own ipl_block variable. Thus rename the ipl_block in zcore to prevent name collision and highlight that it's only used locally. Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Fixes: 1e941d39493f ("s390: move ipl block to .boot.preserved.data section") Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller9-10/+17
Two easy cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-0/+1
Pull networking fixes from David Miller: "Just the usual assortment of small'ish fixes: 1) Conntrack timeout is sometimes not initialized properly, from Alexander Potapenko. 2) Add a reasonable range limit to tcp_min_rtt_wlen to avoid undefined behavior. From ZhangXiaoxu. 3) des1 field of descriptor in stmmac driver is initialized with the wrong variable. From Yue Haibing. 4) Increase mlxsw pci sw reset timeout a little bit more, from Ido Schimmel. 5) Match IOT2000 stmmac devices more accurately, from Su Bao Cheng. 6) Fallback refcount fix in TLS code, from Jakub Kicinski. 7) Fix max MTU check when using XDP in mlx5, from Maxim Mikityanskiy. 8) Fix recursive locking in team driver, from Hangbin Liu. 9) Fix tls_set_device_offload_Rx() deadlock, from Jakub Kicinski. 10) Don't use napi_alloc_frag() outside of softiq context of socionext driver, from Ilias Apalodimas. 11) MAC address increment overflow in ncsi, from Tao Ren. 12) Fix a regression in 8K/1M pool switching of RDS, from Zhu Yanjun. 13) ipv4_link_failure has to validate the headers that are actually there because RAW sockets can pass in arbitrary garbage, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) ipv4: add sanity checks in ipv4_link_failure() net/rose: fix unbound loop in rose_loopback_timer() rxrpc: fix race condition in rxrpc_input_packet() net: rds: exchange of 8K and 1M pool net: vrf: Fix operation not supported when set vrf mac net/ncsi: handle overflow when incrementing mac address net: socionext: replace napi_alloc_frag with the netdev variant on init net: atheros: fix spelling mistake "underun" -> "underrun" spi: ST ST95HF NFC: declare missing of table spi: Micrel eth switch: declare missing of table net: stmmac: move stmmac_check_ether_addr() to driver probe netfilter: fix nf_l4proto_log_invalid to log invalid packets netfilter: never get/set skb->tstamp netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON Documentation: decnet: remove reference to CONFIG_DECNET_ROUTE_FWMARK dt-bindings: add an explanation for internal phy-mode net/tls: don't leak IV and record seq when offload fails net/tls: avoid potential deadlock in tls_set_device_offload_rx() selftests/net: correct the return value for run_afpackettests team: fix possible recursive locking when add slaves ...
2019-04-24vfio-ccw: Prevent quiesce function going into an infinite loopFarhan Ali1-14/+18
The quiesce function calls cio_cancel_halt_clear() and if we get an -EBUSY we go into a loop where we: - wait for any interrupts - flush all I/O in the workqueue - retry cio_cancel_halt_clear During the period where we are waiting for interrupts or flushing all I/O, the channel subsystem could have completed a halt/clear action and turned off the corresponding activity control bits in the subchannel status word. This means the next time we call cio_cancel_halt_clear(), we will again start by calling cancel subchannel and so we can be stuck between calling cancel and halt forever. Rather than calling cio_cancel_halt_clear() immediately after waiting, let's try to disable the subchannel. If we succeed in disabling the subchannel then we know nothing else can happen with the device. Suggested-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Message-Id: <4d5a4b98ab1b41ac6131b5c36de18b76c5d66898.1555449329.git.alifm@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-24vfio-ccw: Release any channel program when releasing/removing vfio-ccw mdevFarhan Ali1-1/+10
When releasing the vfio-ccw mdev, we currently do not release any existing channel program and its pinned pages. This can lead to the following warning: [1038876.561565] WARNING: CPU: 2 PID: 144727 at drivers/vfio/vfio_iommu_type1.c:1494 vfio_sanity_check_pfn_list+0x40/0x70 [vfio_iommu_type1] .... 1038876.561921] Call Trace: [1038876.561935] ([<00000009897fb870>] 0x9897fb870) [1038876.561949] [<000003ff8013bf62>] vfio_iommu_type1_detach_group+0xda/0x2f0 [vfio_iommu_type1] [1038876.561965] [<000003ff8007b634>] __vfio_group_unset_container+0x64/0x190 [vfio] [1038876.561978] [<000003ff8007b87e>] vfio_group_put_external_user+0x26/0x38 [vfio] [1038876.562024] [<000003ff806fc608>] kvm_vfio_group_put_external_user+0x40/0x60 [kvm] [1038876.562045] [<000003ff806fcb9e>] kvm_vfio_destroy+0x5e/0xd0 [kvm] [1038876.562065] [<000003ff806f63fc>] kvm_put_kvm+0x2a4/0x3d0 [kvm] [1038876.562083] [<000003ff806f655e>] kvm_vm_release+0x36/0x48 [kvm] [1038876.562098] [<00000000003c2dc4>] __fput+0x144/0x228 [1038876.562113] [<000000000016ee82>] task_work_run+0x8a/0xd8 [1038876.562125] [<000000000014c7a8>] do_exit+0x5d8/0xd90 [1038876.562140] [<000000000014d084>] do_group_exit+0xc4/0xc8 [1038876.562155] [<000000000015c046>] get_signal+0x9ae/0xa68 [1038876.562169] [<0000000000108d66>] do_signal+0x66/0x768 [1038876.562185] [<0000000000b9e37e>] system_call+0x1ea/0x2d8 [1038876.562195] 2 locks held by qemu-system-s39/144727: [1038876.562205] #0: 00000000537abaf9 (&container->group_lock){++++}, at: __vfio_group_unset_container+0x3c/0x190 [vfio] [1038876.562230] #1: 00000000670008b5 (&iommu->lock){+.+.}, at: vfio_iommu_type1_detach_group+0x36/0x2f0 [vfio_iommu_type1] [1038876.562250] Last Breaking-Event-Address: [1038876.562262] [<000003ff8013aa24>] vfio_sanity_check_pfn_list+0x3c/0x70 [vfio_iommu_type1] [1038876.562272] irq event stamp: 4236481 [1038876.562287] hardirqs last enabled at (4236489): [<00000000001cee7a>] console_unlock+0x6d2/0x740 [1038876.562299] hardirqs last disabled at (4236496): [<00000000001ce87e>] console_unlock+0xd6/0x740 [1038876.562311] softirqs last enabled at (4234162): [<0000000000b9fa1e>] __do_softirq+0x556/0x598 [1038876.562325] softirqs last disabled at (4234153): [<000000000014e4cc>] irq_exit+0xac/0x108 [1038876.562337] ---[ end trace 6c96d467b1c3ca06 ]--- Similarly we do not free the channel program when we are removing the vfio-ccw device. Let's fix this by resetting the device and freeing the channel program and pinned pages in the release path. For the remove path we can just quiesce the device, since in the remove path the mediated device is going away for good and so we don't need to do a full reset. Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Message-Id: <ae9f20dc8873f2027f7b3c5d2aaa0bdfe06850b8.1554756534.git.alifm@linux.ibm.com> Acked-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-24vfio-ccw: Do not call flush_workqueue while holding the spinlockFarhan Ali1-1/+1
Currently we call flush_workqueue while holding the subchannel spinlock. But flush_workqueue function can go to sleep, so do not call the function while holding the spinlock. Fixes the following bug: [ 285.203430] BUG: scheduling while atomic: bash/14193/0x00000002 [ 285.203434] INFO: lockdep is turned off. .... [ 285.203485] Preemption disabled at: [ 285.203488] [<000003ff80243e5c>] vfio_ccw_sch_quiesce+0xbc/0x120 [vfio_ccw] [ 285.203496] CPU: 7 PID: 14193 Comm: bash Tainted: G W .... [ 285.203504] Call Trace: [ 285.203510] ([<0000000000113772>] show_stack+0x82/0xd0) [ 285.203514] [<0000000000b7a102>] dump_stack+0x92/0xd0 [ 285.203518] [<000000000017b8be>] __schedule_bug+0xde/0xf8 [ 285.203524] [<0000000000b95b5a>] __schedule+0x7a/0xc38 [ 285.203528] [<0000000000b9678a>] schedule+0x72/0xb0 [ 285.203533] [<0000000000b9bfbc>] schedule_timeout+0x34/0x528 [ 285.203538] [<0000000000b97608>] wait_for_common+0x118/0x1b0 [ 285.203544] [<0000000000166d6a>] flush_workqueue+0x182/0x548 [ 285.203550] [<000003ff80243e6e>] vfio_ccw_sch_quiesce+0xce/0x120 [vfio_ccw] [ 285.203556] [<000003ff80245278>] vfio_ccw_mdev_reset+0x38/0x70 [vfio_ccw] [ 285.203562] [<000003ff802458b0>] vfio_ccw_mdev_remove+0x40/0x78 [vfio_ccw] [ 285.203567] [<000003ff801a499c>] mdev_device_remove_ops+0x3c/0x80 [mdev] [ 285.203573] [<000003ff801a4d5c>] mdev_device_remove+0xc4/0x130 [mdev] [ 285.203578] [<000003ff801a5074>] remove_store+0x6c/0xa8 [mdev] [ 285.203582] [<000000000046f494>] kernfs_fop_write+0x14c/0x1f8 [ 285.203588] [<00000000003c1530>] __vfs_write+0x38/0x1a8 [ 285.203593] [<00000000003c187c>] vfs_write+0xb4/0x198 [ 285.203597] [<00000000003c1af2>] ksys_write+0x5a/0xb0 [ 285.203601] [<0000000000b9e270>] system_call+0xdc/0x2d8 Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <626bab8bb2958ae132452e1ddaf1b20882ad5a9d.1554756534.git.alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-24vfio-ccw: add handling for async channel instructionsCornelia Huck6-18/+256
Add a region to the vfio-ccw device that can be used to submit asynchronous I/O instructions. ssch continues to be handled by the existing I/O region; the new region handles hsch and csch. Interrupt status continues to be reported through the same channels as for ssch. Acked-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-24s390/cio: export hsch to modulesCornelia Huck1-0/+1
The vfio-ccw code will need this, and it matches treatment of ssch and csch. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-24vfio-ccw: add capabilities chainCornelia Huck2-26/+199
Allow to extend the regions used by vfio-ccw. The first user will be handling of halt and clear subchannel. Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-24vfio-ccw: protect the I/O regionCornelia Huck3-9/+24
Introduce a mutex to disallow concurrent reads or writes to the I/O region. This makes sure that the data the kernel or user space see is always consistent. The same mutex will be used to protect the async region as well. Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-24vfio-ccw: rework ssch state handlingCornelia Huck3-8/+16
The flow for processing ssch requests can be improved by splitting the BUSY state: - CP_PROCESSING: We reject any user space requests while we are in the process of translating a channel program and submitting it to the hardware. Use -EAGAIN to signal user space that it should retry the request. - CP_PENDING: We have successfully submitted a request with ssch and are now expecting an interrupt. As we can't handle more than one channel program being processed, reject any further requests with -EBUSY. A final interrupt will move us out of this state. By making this a separate state, we make it possible to issue a halt or a clear while we're still waiting for the final interrupt for the ssch (in a follow-on patch). It also makes a lot of sense not to preemptively filter out writes to the io_region if we're in an incorrect state: the state machine will handle this correctly. Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-24vfio-ccw: make it safe to access channel programsCornelia Huck3-1/+27
When we get a solicited interrupt, the start function may have been cleared by a csch, but we still have a channel program structure allocated. Make it safe to call the cp accessors in any case, so we can call them unconditionally. While at it, also make sure that functions called from other parts of the code return gracefully if the channel program structure has not been initialized (even though that is a bug in the caller). Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-04-18Merge tag 's390-5.1-3' of ↵Linus Torvalds8-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 bug fixes from Martin Schwidefsky: - Fix overwrite of the initial ramdisk due to misuse of IS_ENABLED - Fix integer overflow in the dasd driver resulting in incorrect number of blocks for large devices - Fix a lockdep false positive in the 3270 driver - Fix a deadlock in the zcrypt driver - Fix incorrect debug feature entries in the pkey api - Fix inline assembly constraints fallout with CONFIG_KASAN=y * tag 's390-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: correct some inline assembly constraints s390/pkey: add one more argument space for debug feature entry s390/zcrypt: fix possible deadlock situation on ap queue remove s390/3270: fix lockdep false positive on view->lock s390/dasd: Fix capacity calculation for large volumes s390/mem_detect: Use IS_ENABLED(CONFIG_BLK_DEV_INITRD)
2019-04-18s390/qdio: consolidate index tracking for queue scanJulian Wiedmann1-24/+31
qdio.ko offers a small number of high-level functions to drive the scanning of a QDIO queue for ready-to-process SBALs: qdio_get_next_buffers(), __[ti]qdio_inbound_processing() and __qdio_outbound_processing(). Let each of those functions maintain the 'start' index for their current scan, and pass it to lower-level helpers as needed. This improves the code's overall layering, and allows us to eliminate the additional first_to_kick cursor with a follow-on patch. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-18s390/qdio: limit direct access to first_to_check cursorJulian Wiedmann1-27/+29
Refactor all the low-level helpers to take the first_to_check cursor as parameter, rather than accessing it directly. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-18s390: ctcm: fix ctcm_new_device error return codeArnd Bergmann1-0/+1
clang points out that the return code from this function is undefined for one of the error paths: ../drivers/s390/net/ctcm_main.c:1595:7: warning: variable 'result' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (priv->channel[direction] == NULL) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/s390/net/ctcm_main.c:1638:9: note: uninitialized use occurs here return result; ^~~~~~ ../drivers/s390/net/ctcm_main.c:1595:3: note: remove the 'if' if its condition is always false if (priv->channel[direction] == NULL) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../drivers/s390/net/ctcm_main.c:1539:12: note: initialize the variable 'result' to silence this warning int result; ^ Make it return -ENODEV here, as in the related failure cases. gcc has a known bug in underreporting some of these warnings when it has already eliminated the assignment of the return code based on some earlier optimization step. Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17s390/qeth: stop/wake TX queues based on their fill levelJulian Wiedmann5-48/+71
Current xmit code only stops the txq after attempting to fill an IO buffer that hasn't been TX-completed yet. In many-connection scenarios, this can result in frequent rejected TX attempts, requeuing of skbs with NETDEV_TX_BUSY and extra overhead. Now that we have a proper 1-to-1 relation between stack-side txqs and our HW Queues, overhaul the stop/wake logic so that the xmit code stops the txq as needed. Given that we might map multiple skbs into a single buffer, it's crucial to ensure that the queue always provides an _entirely_ empty IO buffer. Otherwise large skbs (eg TSO) might not fit into the last available buffer. So whenever qeth_do_send_packet() first utilizes an _empty_ buffer, it updates & checks the used_buffers count. This now ensures that an skb passed to qeth_xmit() can always be mapped into an IO buffer, so remove all of the -EBUSY roll-back handling in the TX path. We preserve the minimal safety-checks ("Is this IO buffer really available?"), just in case some nasty future bug ever attempts to corrupt an in-use buffer. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>