| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
I have an Iomega Z100P2 zip drive, but it does not work with my StarTech
PEX1P2 AX99100 PCIe parallel port, which evidently does not support 16-bit
or 32-bit EPP. Currently the only way to tell the PPA driver to use 8-bit
EPP is to write 'mode=3' to /proc/scsi/ppa/*, but the driver doesn't
actually distinguish between the three EPP modes and still tries to use
16-bit or 32-bit EPP. And even if writing to that file did make the driver
use 8-bit EPP, it still wouldn't do me any good because by the time that
file exists, the drive has already failed to initialize.
Add a new parameter /sys/module/ppa/mode to set the transfer mode before
initializing the drive. This parameter replaces the use of
CONFIG_SCSI_IZIP_EPP16 in the PPA driver.
At the same time, default to 8-bit EPP. 16-bit and 32-bit EPP are not
necessary for the drive to function, nor are they part of the IEEE 1284
standard, so the driver should not assume that they are available.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Link: https://lore.kernel.org/r/20230807155856.362864-2-alexhenrie24@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not
being declared. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20230522105049.1467313-32-schnelle@linux.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Linux SATA support in ipr has always been limited to SATA DVDs. The last
systems that had the option of including a SATA DVD was Power 8, which have
been withdrawn for some time now, so this support can be removed.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20230412174015.114764-1-brking@linux.vnet.ibm.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
SCSI_MOD is a helper config symbol for configuring RAID_ATTRS properly,
i.e., RAID_ATTRS needs to be m when SCSI=m.
This helper config symbol SCSI_MOD still shows up even in kernel
configurations that do not select the block subsystem and where SCSI is not
even a configuration option mentioned and selectable.
Make this SCSI_MOD depend on BLOCK, so that it only shows up when it is
slightly relevant in the kernel configuration.
Link: https://lore.kernel.org/r/20220919060112.24802-1-lukas.bulwahn@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The dpt_i2o driver was fixed to stop using virt_to_bus() in 2008, but it
still has a stale reference in an error handling code path that could never
work. I submitted a patch to fix this reference earlier, but Hannes
Reinecke suggested that removing the driver may be just as good here.
The i2o driver layer was removed in 2015 with commit 4a72a7af462d
("staging: remove i2o subsystem"), but the even older dpt_i2o scsi driver
stayed around.
The last non-cleanup patches I could find were from Miquel van Smoorenburg
and Mark Salyzyn back in 2008, they might know if there is any chance of
the hardware still being used anywhere.
Link: https://lore.kernel.org/linux-scsi/CAK8P3a1XfwkTOV7qOs1fTxf4vthNBRXKNu8A5V7TWnHT081NGA@mail.gmail.com/T/
Link: https://lore.kernel.org/r/20220624155226.2889613-3-arnd@kernel.org
Cc: Miquel van Smoorenburg <mikevs@xs4all.net>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The BusLogic driver is the last remaining driver that relies on the
deprecated bus_to_virt() function, which in turn only works on a few
architectures, and is incompatible with both swiotlb and iommu support.
Before commit 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit."), the
driver had a dependency on x86-32, presumably because of this
problem. However, the change introduced another bug that made it still
impossible to use the driver on any 64-bit machine.
This was in turn fixed in commit 56f396146af2 ("scsi: BusLogic: Fix 64-bit
system enumeration error for Buslogic"), 8 years later, which shows that
there are not a lot of users.
Maciej is still using the driver on 32-bit hardware, and Khalid mentioned
that the driver works with the device emulation used in VirtualBox and
VMware. Both of those only emulate it for Windows 2000 and older operating
systems that did not ship with the better LSI logic driver.
Do a minimum fix that searches through the list of descriptors to find one
that matches the bus address. This is clearly as inefficient as was
indicated in the code comment about the lack of a bus_to_virt()
replacement. A better fix would likely involve changing out the entire
descriptor allocation for a simpler one, but that would be much more
invasive.
Link: https://lore.kernel.org/r/20220624155226.2889613-2-arnd@kernel.org
Cc: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: Matt Wang <wwentao@vmware.com>
Tested-by: Khalid Aziz <khalid@gonehiking.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Split the drivers/scsi/ufs directory into 'core' and 'host' directories
under the drivers/ufs/ directory. Move shared header files into the
include/ufs/ directory. This separation makes it clear which header files
UFS drivers are allowed to include (include/ufs/*.h) and which header files
UFS drivers are not allowed to include (drivers/ufs/core/*.h).
Update the MAINTAINERS file. Add myself as a UFS reviewer.
Link: https://lore.kernel.org/r/20220511212552.655341-1-bvanassche@acm.org
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Keoseong Park <keosung.park@samsung.com>
Tested-by: Bean Huo <beanhuo@micron.com>
Tested-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
CONFIG_BLK_SCSI_REQUEST is rather misnamed as it enables building a small
amount of code shared by the SCSI initiator, target, and consumers of the
scsi_request passthrough API. Rename it and also allow building it as a
module.
[mkp: add module license]
Link: https://lore.kernel.org/r/20210724072033.1284840-20-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the SCSI-specific bsg code in the SCSI midlayer instead of in the
common bsg code. This just keeps the common bsg code block/ and also
allows building it as a module.
Link: https://lore.kernel.org/r/20210724072033.1284840-15-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit d2bcbeab4200 ("scsi: blkcg: Add app identifier support for
blkcg") introduced an FC_APPID config option under SCSI. However, the
added config option is not used anywhere. Simply remove it.
The block layer BLK_CGROUP_FC_APPID config option is what actually
controls whether the application ID code should be built or not. Make
this option dependent on NVMe over FC since that is currently the only
transport which supports the capability.
Fixes: d2bcbeab4200 ("scsi: blkcg: Add app identifier support for blkcg")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This final patch ties the efct driver into the kernel Kconfig and build
linkages in the drivers/scsi directory.
Link: https://lore.kernel.org/r/20210601235512.20104-32-jsmart2021@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add a unique application identifier (i.e fc_app_id member) in blkcg. This
allows identification of traffic belonging to an specific both on the host
and in the fabric infrastructure. As an example, this allows the storage
stack to uniquely identify traffic belong to particular virtual machine.
Link: https://lore.kernel.org/r/20210608043556.274139-3-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This adds the Kconfig and mpi30 headers.
Link: https://lore.kernel.org/r/20210520152545.2710479-2-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Cc: bvanassche@acm.org
Cc: hch@infradead.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove leading spaces before tabs in Kconfig file(s) by running the
following command:
$ find drivers/scsi -name 'Kconfig*' | xargs sed -r -i 's/^[ ]+\t/\t/'
Link: https://lore.kernel.org/r/20210517095835.81733-1-juergh@canonical.com
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The ISA support in Buslogic has been broken for a long time, as all
the I/O path expects a struct device for DMA mapping that is derived from
the PCI device, which would simply crash for ISA adapters.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Link: https://lore.kernel.org/r/20210331073001.46776-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
lpfc depends on irq_poll library, but it is not selected automatically.
When irq_poll is not selected, compiling it can run into following error
ERROR: modpost: "irq_poll_init" [drivers/scsi/lpfc/lpfc.ko] undefined!
ERROR: modpost: "irq_poll_sched" [drivers/scsi/lpfc/lpfc.ko] undefined!
ERROR: modpost: "irq_poll_complete" [drivers/scsi/lpfc/lpfc.ko] undefined!
Link: https://lore.kernel.org/r/20210126000554.309858-1-ztong0001@gmail.com
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Drop the internal SCSI message definitions and use the functions provided
by the SPI transport class.
Link: https://lore.kernel.org/r/20210113090500.129644-21-hare@suse.de
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The gdth driver refers to a SCSI parallel, PCI-only HBA RAID adapter which
was manufactured by the now-defunct ICP Vortex company, later acquired by
Adaptec and superseded by the aacraid series of controllers. The driver
itself would require a major overhaul before any modifications can be
attempted, but seeing that it's unlikely to have any users left it should
rather be removed completely.
Link: https://lore.kernel.org/r/20210113090500.129644-2-hare@suse.de
Cautiously-Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since commit 317aeb83c92b ("scsi: lpfc: Add blk_io_poll support for latency
improvment"), the lpfc driver depends on CPUFREQ. Without it, builds fail
with
drivers/scsi/lpfc/lpfc_sli.c: In function 'lpfc_init_idle_stat_hb':
drivers/scsi/lpfc/lpfc_sli.c:7329:26: error:
implicit declaration of function 'get_cpu_idle_time'
Add the missing dependency.
Link: https://lore.kernel.org/r/20200722023027.36866-1-linux@roeck-us.net
Fixes: 317aeb83c92b ("scsi: lpfc: Add blk_io_poll support for latency improvment")
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: James Smart <jsmart2021@gmail.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
IBM decided to retire a lot of the content that was previously hosted on
"developerworks", and so some of the links we've used for documentation are
now dead or redirect to some general landing page with no correlation to
what the links were meant to provide.
Change the provided link in the Kconfig file for zfcp to rather refer to
our device drivers book that we regularly update and publish for free, and
whose name hasn't been changed since it was first published.
Our hardware is also not called "IBM eServer zSeries" anymore - in fact, it
hasn't been called like that since 2006. Use a broader term that covers
different server names over time.
Lastly, add a short paragraph about how our HBAs are typically named, to
have some more tangible references.
Link: https://lore.kernel.org/r/96069b9f4c4f056a515b37e89b2bdfccc282e3d3.1593780621.git.bblock@linux.ibm.com
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Link: https://lore.kernel.org/r/20200413170501.13381-1-flameeyes@flameeyes.com
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This series has a huge amount of churn because it pulls in Mauro's doc
update changing all our txt files to rst ones.
Excluding that, we have the usual driver updates (qla2xxx, ufs, lpfc,
zfcp, ibmvfc, pm80xx, aacraid), a treewide update for scnprintf and
some other minor updates.
The major core change is Hannes moving functions out of the aacraid
driver and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (223 commits)
scsi: aic7xxx: aic97xx: Remove FreeBSD-specific code
scsi: ufs: Do not rely on prefetched data
scsi: dc395x: remove dc395x_bios_param
scsi: libiscsi: Fix error count for active session
scsi: hpsa: correct race condition in offload enabled
scsi: message: fusion: Replace zero-length array with flexible-array member
scsi: qedi: Add PCI shutdown handler support
scsi: qedi: Add MFW error recovery process
scsi: ufs: Enable block layer runtime PM for well-known logical units
scsi: ufs-qcom: Override devfreq parameters
scsi: ufshcd: Let vendor override devfreq parameters
scsi: ufshcd: Update the set frequency to devfreq
scsi: ufs: Resume ufs host before accessing ufs device
scsi: ufs-mediatek: customize the delay for enabling host
scsi: ufs: make HCE polling more compact to improve initialization latency
scsi: ufs: allow custom delay prior to host enabling
scsi: ufs-mediatek: use common delay function
scsi: ufs: introduce common and flexible delay function
scsi: ufs: use an enum for host capabilities
scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
...
|
|
There is no reason to expose SATA_PMP config option when no SATA
host drivers are enabled. To fix it add SATA_HOST config option,
make all SATA host drivers select it and finally make SATA_PMP
config options depend on it.
This also serves as preparation for the future changes which
optimize libata core code size on PATA only setups.
CC: "James E.J. Bottomley" <jejb@linux.ibm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # for SCSI bits
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Link: https://lore.kernel.org/r/08202c87294d61d147ec4ac784219d20805cdeb5.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/6b2ddb36983e81e7028de6e5fd0c643c2fb4c6c9.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/c617b37769a82901def0fed3d236a25995c4e160.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/f57b8ddf30397c2c7213e49634e5e9cbd4246368.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/433d073fa982174a19783c2e59412b724e2cf946.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/b69f795c781811b9a908abe43485f1dca0ee8ac5.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/3db8cd51d77fef6b66632249412969caa29dec40.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/e755b9644047eed6be69fcc77eb797f0801fcb99.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/212fd7961c134c5bd73d87cd818bcddc30270804.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/3c0876df0045695185f922a0404c497a69de36a9.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/750629b6a5233c85c5391c44d126606b8aabefc8.1583136624.git.mchehab+huawei@kernel.org
Acked-by: Khalid Aziz <khalid@gonehiking.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/097cfcc7f25343676a1fedcefed7e3b91b41b4df.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/67c60ad88777c91937d49771e2a3f48cbf353e4c.1583136624.git.mchehab+huawei@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This kernel configuration is basically enabling/disabling sr driver quirks
detection. While these quirks are for fairly rare devices (very old CD
burners, and a glucometer), the additional detection of these models is a
very minimal amount of code.
The logic behind the quirks is always built into the sr driver.
This also removes the config from all the defconfig files that are enabling
this already.
Link: https://lore.kernel.org/r/20200223191144.726-1-flameeyes@flameeyes.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently t10-pi can only be built into the block layer which via
crc-t10dif pulls in a whole chunk of the Crypto API. In fact all
users of t10-pi work as modules and there is no reason for it to
always be built-in.
This patch adds a new hidden option for t10-pi that is selected
automatically based on BLK_DEV_INTEGRITY and whether the users
of t10-pi are built-in or not.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Nine changes, eight to drivers (qla2xxx, hpsa, lpfc, alua, ch,
53c710[x2], target) and one core change that tries to close a race
between sysfs delete and module removal"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: remove left-over BUILD_NVME defines
scsi: core: try to get module before removing device
scsi: hpsa: add missing hunks in reset-patch
scsi: target: core: Do not overwrite CDB byte 1
scsi: ch: Make it possible to open a ch device multiple times again
scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE
scsi: sni_53c710: fix compilation error
scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions
scsi: qla2xxx: fix a potential NULL pointer dereference
|
|
When building a kernel with SCSI_SNI_53C710 enabled, Kconfig warns:
WARNING: unmet direct dependencies detected for 53C700_LE_ON_BE
Depends on [n]: SCSI_LOWLEVEL [=y] && SCSI [=y] && SCSI_LASI700 [=n]
Selected by [y]:
- SCSI_SNI_53C710 [=y] && SCSI_LOWLEVEL [=y] && SNI_RM [=y] && SCSI [=y]
Add the missing depends SCSI_SNI_53C710 to 53C700_LE_ON_BE to fix it.
Link: https://lore.kernel.org/r/20191009151128.32411-1-tbogendoerfer@suse.de
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We get a warning when CONFIG_SCSI_LOWLEVEL is disabled here:
WARNING: unmet direct dependencies detected for SCSI_FDOMAIN
Depends on [n]: SCSI_LOWLEVEL [=n] && SCSI [=y]
Selected by [m]:
- PCMCIA_FDOMAIN [=m] && SCSI_LOWLEVEL_PCMCIA [=y] && SCSI [=y] && PCMCIA [=y] && m && MODULES [=y]
Move all of SCSI_LOWLEVEL_PCMCIA inside of the existing SCSI_LOWLEVEL
section. Very few people use the PCMCIA support these days, and they likely
don't mind having to turn on SCSI_LOWLEVEL as well. This way we avoid the
link error and get a more sensible structure.
Fixes: 7d47fa065e62 ("scsi: fdomain: Add PCMCIA support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
removal of the osst driver (I heard from Willem privately that he
would like the driver removed because all his test hardware has
failed). Plus number of minor changes, spelling fixes and other
trivia.
The big merge conflict this time around is the SPDX licence tags.
Following discussion on linux-next, we believe our version to be more
accurate than the one in the tree, so the resolution is to take our
version for all the SPDX conflicts"
Note on the SPDX license tag conversion conflicts: the SCSI tree had
done its own SPDX conversion, which in some cases conflicted with the
treewide ones done by Thomas & co.
In almost all cases, the conflicts were purely syntactic: the SCSI tree
used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the
treewide conversion had used the new-style ones ("GPL-2.0-only" and
"GPL-2.0-or-later").
In these cases I picked the new-style one.
In a few cases, the SPDX conversion was actually different, though. As
explained by James above, and in more detail in a pre-pull-request
thread:
"The other problem is actually substantive: In the libsas code Luben
Tuikov originally specified gpl 2.0 only by dint of stating:
* This file is licensed under GPLv2.
In all the libsas files, but then muddied the water by quoting GPLv2
verbatim (which includes the or later than language). So for these
files Christoph did the conversion to v2 only SPDX tags and Thomas
converted to v2 or later tags"
So in those cases, where the spdx tag substantially mattered, I took the
SCSI tree conversion of it, but then also took the opportunity to turn
the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag.
Similarly, when there were whitespace differences or other differences
to the comments around the copyright notices, I took the version from
the SCSI tree as being the more specific conversion.
Finally, in the spdx conversions that had no conflicts (because the
treewide ones hadn't been done for those files), I just took the SCSI
tree version as-is, even if it was old-style. The old-style conversions
are perfectly valid, even if the "-only" and "-or-later" versions are
perhaps more descriptive.
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits)
scsi: qla2xxx: move IO flush to the front of NVME rport unregistration
scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
scsi: qla2xxx: on session delete, return nvme cmd
scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1
scsi: megaraid_sas: Introduce various Aero performance modes
scsi: megaraid_sas: Use high IOPS queues based on IO workload
scsi: megaraid_sas: Set affinity for high IOPS reply queues
scsi: megaraid_sas: Enable coalescing for high IOPS queues
scsi: megaraid_sas: Add support for High IOPS queues
scsi: megaraid_sas: Add support for MPI toolbox commands
scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver
scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
scsi: megaraid_sas: Handle sequence JBOD map failure at driver level
scsi: megaraid_sas: Don't send FPIO to RL Bypass queue
scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
scsi: megaraid_sas: Call disable_irq from process IRQ poll
scsi: megaraid_sas: Remove few debug counters from IO path
...
|
|
Future Domain 16xx ISA SCSI support card support.
Tested on IBM 92F0330 card (18C50 chip) with v1.00 BIOS.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Future Domain TMC-3260/AHA-2920A PCI card support.
Tested on Adaptec AHA-2920A PCI card.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Future Domain TMC-16xx/TMC-3260 SCSI driver.
This is the core driver, common for PCI, ISA and PCMCIA cards.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The osst driver is becoming obsolete, as the manufacturer went out of
business ages ago, and the maintainer has no means of testing any
improvements anymore. Plus these days flash drives are cheaper and offer a
higher capacity. So drop it completely.
Cc: Willem Riede <osst@riede.org>
Signed-off-by: Hannes Reinece <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The kbuild documentation clearly shows that the documents
there are written at different times: some use markdown,
some use their own peculiar logic to split sections.
Convert everything to ReST without affecting too much
the author's style and avoiding adding uneeded markups.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: arcmsr, qla2xxx, lpfc,
hisi_sas, target/iscsi and target/core.
Additionally Christoph refactored gdth as part of the dma changes. The
major mid-layer change this time is the removal of bidi commands and
with them the whole of the osd/exofs driver and filesystem. This is a
major simplification for block and mq in particular"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (240 commits)
scsi: cxgb4i: validate tcp sequence number only if chip version <= T5
scsi: cxgb4i: get pf number from lldi->pf
scsi: core: replace GFP_ATOMIC with GFP_KERNEL in scsi_scan.c
scsi: mpt3sas: Add missing breaks in switch statements
scsi: aacraid: Fix missing break in switch statement
scsi: kill command serial number
scsi: csiostor: drop serial_number usage
scsi: mvumi: use request tag instead of serial_number
scsi: dpt_i2o: remove serial number usage
scsi: st: osst: Remove negative constant left-shifts
scsi: ufs-bsg: Allow reading descriptors
scsi: ufs: Allow reading descriptor via raw upiu
scsi: ufs-bsg: Change the calling convention for write descriptor
scsi: ufs: Remove unused device quirks
Revert "scsi: ufs: disable vccq if it's not needed by UFS device"
scsi: megaraid_sas: Remove a bunch of set but not used variables
scsi: clean obsolete return values of eh_timed_out
scsi: sd: Optimal I/O size should be a multiple of physical block size
scsi: MAINTAINERS: SCSI initiator and target tweaks
scsi: fcoe: make use of fip_mode enum complete
...
|
