summaryrefslogtreecommitdiff
path: root/drivers/scsi/mpt3sas
AgeCommit message (Collapse)AuthorFilesLines
2023-11-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-2/+2
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc, scsi_debug) plus the usual assorted minor fixes and updates. The major change this time around is a prep patch for rethreading of the driver reset handler API not to take a scsi_cmd structure which starts to reduce various drivers' dependence on scsi_cmd in error handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits) scsi: ufs: core: Leave space for '\0' in utf8 desc string scsi: ufs: core: Conversion to bool not necessary scsi: ufs: core: Fix race between force complete and ISR scsi: megaraid: Fix up debug message in megaraid_abort_and_reset() scsi: aic79xx: Fix up NULL command in ahd_done() scsi: message: fusion: Initialize return value in mptfc_bus_reset() scsi: mpt3sas: Fix loop logic scsi: snic: Remove useless code in snic_dr_clean_pending_req() scsi: core: Add comment to target_destroy in scsi_host_template scsi: core: Clean up scsi_dev_queue_ready() scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler() scsi: target: core: Fix kernel-doc comment scsi: pmcraid: Fix kernel-doc comment scsi: core: Handle depopulation and restoration in progress scsi: ufs: core: Add support for parsing OPP scsi: ufs: core: Add OPP support for scaling clocks and regulators scsi: ufs: dt-bindings: common: Add OPP table scsi: scsi_debug: Add param to control sdev's allow_restart scsi: scsi_debug: Add debugfs interface to fail target reset scsi: scsi_debug: Add new error injection type: Reset LUN failed ...
2023-10-25scsi: mpt3sas: Fix loop logicRanjan Kumar1-2/+2
The retry loop continues to iterate until the count reaches 30, even after receiving the correct value. Exit loop when a non-zero value is read. Fixes: 4ca10f3e3174 ("scsi: mpt3sas: Perform additional retries if doorbell read returns 0") Cc: stable@vger.kernel.org Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20231020105849.6350-1-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-10-17scsi: mpt3sas: Fix in error pathTomas Henzl1-1/+3
The driver should be deregistered as misc driver after PCI registration failure. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20231015114529.10725-1-thenzl@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-31scsi: mpt3sas: Remove volatile qualifierRanjan Kumar3-6/+6
Remove reduntant volatile qualifier. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20230829090020.5417-3-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-31scsi: mpt3sas: Perform additional retries if doorbell read returns 0Ranjan Kumar2-13/+34
The driver retries certain register reads 3 times if the returned value is 0. This was done because the controller could return 0 for certain registers if other registers were being accessed concurrently by the BMC. In certain systems with increased BMC interactions, the register values returned can be 0 for longer than 3 retries. Change the retry count from 3 to 30 for the affected registers to prevent problems with out-of-band management. Fixes: b899202901a8 ("scsi: mpt3sas: Add separate function for aero doorbell reads") Cc: stable@vger.kernel.org Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20230829090020.5417-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-12scsi: mpt3sas: Fix an issue when driver is being removedTomas Henzl1-2/+2
Warnings may be logged during driver removal: mpt3sas 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT .., Fix this by deallocating DMA memory later. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230403184736.6399-1-thenzl@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-12scsi: mpt3sas: Remove HBA BIOS version in the kernel logRanjan Kumar1-8/+2
This is done to avoid ambiguity between BIOS and UEFI versions. Management tools can be used for getting accurate firmware version information. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20230322092713.6961-1-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-01Merge branch '6.3/scsi-fixes' into 6.4/scsi-stagingMartin K. Petersen2-7/+12
Pull in the fixes branch to resolve an mpi3mr conflict reported by sfr. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: mpt3sas: Don't print sense pool info twiceJerry Snitselaar1-5/+0
_base_allocate_sense_dma_pool() already prints out the sense pool information, so don't print it a second time after calling it in _base_allocate_memory_pools(). In addition the version in _base_allocate_memory_pools() was using the wrong size value, sz, which was last assigned when doing some nvme calculations instead of sense_sz to determine the pool size in kilobytes. Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: MPT-FusionLinux.pdl@broadcom.com Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Fixes: 970ac2bb70e7 ("scsi: mpt3sas: Force sense buffer allocations to be within same 4 GB region") Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20230324193204.567932-1-jsnitsel@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25Merge patch series "Constify most SCSI host templates"Martin K. Petersen1-2/+2
Bart Van Assche <bvanassche@acm.org> says: It helps humans and the compiler if it is made explicit that SCSI host templates are not modified. Hence this patch series that constifies most SCSI host templates. Please consider this patch series for the next merge window. Link: https://lore.kernel.org/r/20230322195515.1267197-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: mpt3sas: Declare SCSI host template constBart Van Assche1-2/+2
Make it explicit that the SCSI host template is not modified. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230322195515.1267197-55-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-10scsi: mpt3sas: Drop redundant pci_enable_pcie_error_reporting()Bjorn Helgaas2-6/+0
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since commit f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230307182842.870378-9-helgaas@kernel.org Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: MPT-FusionLinux.pdl@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-08scsi: mpt3sas: Fix NULL pointer access in mpt3sas_transport_port_add()Wenchao Hao1-2/+12
Port is allocated by sas_port_alloc_num() and rphy is allocated by either sas_end_device_alloc() or sas_expander_alloc(), all of which may return NULL. So we need to check the rphy to avoid possible NULL pointer access. If sas_rphy_add() returned with failure, rphy is set to NULL. We would access the rphy in the following lines which would also result NULL pointer access. Fixes: 78316e9dfc24 ("scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()") Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Link: https://lore.kernel.org/r/20230225100135.2109330-1-haowenchao2@huawei.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-23Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-1/+4
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas). The major core change is a rework to remove the two helpers around scsi_execute_cmd and use it as the only submission interface along with other minor fixes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits) scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param() scsi: ufs: core: Fix device management cmd timeout flow scsi: aic94xx: Add missing check for dma_map_single() scsi: smartpqi: Replace one-element array with flexible-array member scsi: mpt3sas: Fix a memory leak scsi: qla2xxx: Remove the unused variable wwn scsi: ufs: core: Fix kernel-doc syntax scsi: ufs: core: Add hibernation callbacks scsi: snic: Fix memory leak with using debugfs_lookup() scsi: ufs: core: Limit DMA alignment check scsi: Documentation: Correct spelling scsi: Documentation: Correct spelling scsi: target: Documentation: Correct spelling scsi: aacraid: Allocate cmd_priv with scsicmd scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5 scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference scsi: ufs: core: Enable DMA clustering scsi: ufs: exynos: Fix the maximum segment size scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096 ...
2023-02-09scsi: mpt3sas: Fix a memory leakTomas Henzl1-0/+3
Add a forgotten kfree(). Fixes: dbec4c9040ed ("scsi: mpt3sas: lockless command submission") Link: https://lore.kernel.org/r/20230207152159.18627-1-thenzl@redhat.com Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-19scsi: mpt3sas: Demote log level for trace buffer allocation to infoPaul Menzel1-1/+1
Linux logs the error below: $ dmesg --level=err | grep mpt [ 7.647675] mpt3sas_cm0: Trace buffer memory 2048 KB allocated This state does not denote an error condition (and also no warning), so demote the level from error to info. Cc: it+linux-scsi@molgen.mpg.de Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/r/20230103150438.45922-1-pmenzel@molgen.mpg.de Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-12-30Merge branch '6.2/mpt-mpi' into 6.2/scsi-fixesMartin K. Petersen1-2/+1
Pull in Broadcom MPI/MPT fixes that conflicted with patch resolution upstream. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-12-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-0/+2
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (target, ufs, smartpqi, lpfc). There are some core changes, mostly around reworking some of our user context assumptions in device put and moving some code around. The remaining updates are bug fixes and minor changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits) scsi: sg: Fix get_user() in call sg_scsi_ioctl() scsi: megaraid_sas: Fix some spelling mistakes in comment scsi: core: Use SCSI_SCAN_INITIAL in do_scsi_scan_host() scsi: core: Use SCSI_SCAN_RESCAN in __scsi_add_device() scsi: ufs: ufs-mediatek: Remove unnecessary return code scsi: ufs: core: Fix the polling implementation scsi: libsas: Do not export sas_ata_wait_after_reset() scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset scsi: libsas: Add smp_ata_check_ready_type() scsi: Revert "scsi: hisi_sas: Don't send bcast events from HW during nexus HA reset" scsi: Revert "scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()" scsi: ufs: ufs-mediatek: Modify the return value scsi: ufs: ufs-mediatek: Remove unneeded code scsi: device_handler: alua: Call scsi_device_put() from non-atomic context scsi: device_handler: alua: Revert "Move a scsi_device_put() call out of alua_check_vpd()" scsi: snic: Fix possible UAF in snic_tgt_create() scsi: qla2xxx: Initialize vha->unknown_atio_[list, work] for NPIV hosts scsi: qla2xxx: Remove duplicate of vha->iocb_work initialization scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails scsi: sd: Use 16-byte SYNCHRONIZE CACHE on ZBC devices ...
2022-11-26scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()Yang Yingliang1-0/+2
In mpt3sas_transport_port_add(), if sas_rphy_add() returns error, sas_rphy_free() needs be called to free the resource allocated in sas_end_device_alloc(). Otherwise a kernel crash will happen: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G W 6.1.0-rc1+ #189 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x54/0x3d0 lr : device_del+0x37c/0x3d0 Call trace: device_del+0x54/0x3d0 attribute_container_class_device_del+0x28/0x38 transport_remove_classdev+0x6c/0x80 attribute_container_device_trigger+0x108/0x110 transport_remove_device+0x28/0x38 sas_rphy_remove+0x50/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_rphy_remove+0x38/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_remove_host+0x20/0x38 [scsi_transport_sas] scsih_remove+0xd8/0x420 [mpt3sas] Because transport_add_device() is not called when sas_rphy_add() fails, the device is not added. When sas_rphy_remove() is subsequently called to remove the device in the remove() path, a NULL pointer dereference happens. Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221109032403.1636422-1-yangyingliang@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: mpt3sas: Remove usage of dma_get_required_mask() APISreekanth Reddy1-2/+1
Remove the usage of dma_get_required_mask() API. Directly set the DMA mask to 63/64 if the system is a 64bit machine. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Link: https://lore.kernel.org/r/20221028091655.17741-2-sreekanth.reddy@broadcom.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-25scsi: mpt3sas: re-do lost mpt3sas DMA mask fixSreekanth Reddy1-1/+1
This is a re-do of commit e0e0747de0ea ("scsi: mpt3sas: Fix return value check of dma_get_required_mask()"), which I ended up undoing in a mis-merge in commit 62e6e5940c0c ("Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi"). The original commit message was scsi: mpt3sas: Fix return value check of dma_get_required_mask() Fix the incorrect return value check of dma_get_required_mask(). Due to this incorrect check, the driver was always setting the DMA mask to 63 bit. Link: https://lore.kernel.org/r/20220913120538.18759-2-sreekanth.reddy@broadcom.com Fixes: ba27c5cf286d ("scsi: mpt3sas: Don't change the DMA coherent mask after allocations") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> and this fix was lost when I mis-merged the conflict with commit 9df650963bf6 ("scsi: mpt3sas: Don't change DMA mask while reallocating pools"). Reported-by: Juergen Gross <jgross@suse.com> Fixes: 62e6e5940c0c ("Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi") Link: https://lore.kernel.org/all/CAHk-=wjaK-TxrNaGtFDpL9qNHL1MVkWXO1TT6vObD5tXMSC4Zg@mail.gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-10-07Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds6-27/+387
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr, mpt3sas, target). The biggest change (from my biased viewpoint) being that the mpi3mr now attached to the SAS transport class, making it the first fusion type device to do so. Beyond the usual bug fixing and security class reworks, there aren't a huge number of core changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername() scsi: mpi3mr: Remove unnecessary cast scsi: stex: Properly zero out the passthrough command structure scsi: mpi3mr: Update driver version to 8.2.0.3.0 scsi: mpi3mr: Fix scheduling while atomic type bug scsi: mpi3mr: Scan the devices during resume time scsi: mpi3mr: Free enclosure objects during driver unload scsi: mpi3mr: Handle 0xF003 Fault Code scsi: mpi3mr: Graceful handling of surprise removal of PCIe HBA scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernels scsi: mpi3mr: Support new power management framework scsi: mpi3mr: Update mpi3 header files scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use" scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use" scsi: wd33c93: Remove dead code related to the long-gone config WD33C93_PIO scsi: core: Add I/O timeout count for SCSI device scsi: qedf: Populate sysfs attributes for vport scsi: pm8001: Replace one-element array with flexible-array member scsi: 3w-xxxx: Replace one-element array with flexible-array member scsi: hptiop: Replace one-element array with flexible-array member in struct hpt_iop_request_ioctl_command() ...
2022-10-07Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linuxLinus Torvalds1-3/+2
Pull block updates from Jens Axboe: - NVMe pull requests via Christoph: - handle number of queue changes in the TCP and RDMA drivers (Daniel Wagner) - allow changing the number of queues in nvmet (Daniel Wagner) - also consider host_iface when checking ip options (Daniel Wagner) - don't map pages which can't come from HIGHMEM (Fabio M. De Francesco) - avoid unnecessary flush bios in nvmet (Guixin Liu) - shrink and better pack the nvme_iod structure (Keith Busch) - add comment for unaligned "fake" nqn (Linjun Bao) - print actual source IP address through sysfs "address" attr (Martin Belanger) - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang) - handle effects after freeing the request (Keith Busch) - copy firmware_rev on each init (Keith Busch) - restrict management ioctls to admin (Keith Busch) - ensure subsystem reset is single threaded (Keith Busch) - report the actual number of tagset maps in nvme-pci (Keith Busch) - small fabrics authentication fixups (Christoph Hellwig) - add common code for tagset allocation and freeing (Christoph Hellwig) - stop using the request_queue in nvmet (Christoph Hellwig) - set min_align_mask before calculating max_hw_sectors (Rishabh Bhatnagar) - send a rediscover uevent when a persistent discovery controller reconnects (Sagi Grimberg) - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi) - MD pull request via Song: - Various raid5 fix and clean up, by Logan Gunthorpe and David Sloan. - Raid10 performance optimization, by Yu Kuai. - sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu) - IO scheduler switching quisce fix (Keith) - s390/dasd block driver updates (Stefan) - support for recovery for the ublk driver (ZiyangZhang) - rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph) - blk-mq and null_blk map fixes (Bart) - various bcache fixes (Coly, Jilin, Jules) - nbd signal hang fix (Shigeru) - block writeback throttling fix (Yu) - optimize the passthrough mapping handling (me) - prepare block cgroups to being gendisk based (Christoph) - get rid of an old PSI hack in the block layer, moving it to the callers instead where it belongs (Christoph) - blk-throttle fixes and cleanups (Yu) - misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj, Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming, Miaohe, Bart, Coly, Gaosheng * tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits) sbitmap: fix lockup while swapping block: add rationale for not using blk_mq_plug() when applicable block: adapt blk_mq_plug() to not plug for writes that require a zone lock s390/dasd: use blk_mq_alloc_disk blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep nvmet: don't look at the request_queue in nvmet_bdev_set_limits nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all blk-mq: use quiesced elevator switch when reinitializing queues block: replace blk_queue_nowait with bdev_nowait nvme: remove nvme_ctrl_init_connect_q nvme-loop: use the tagset alloc/free helpers nvme-loop: store the generic nvme_ctrl in set->driver_data nvme-loop: initialize sqsize later nvme-fc: use the tagset alloc/free helpers nvme-fc: store the generic nvme_ctrl in set->driver_data nvme-fc: keep ctrl->sqsize in sync with opts->queue_size nvme-rdma: use the tagset alloc/free helpers nvme-rdma: store the generic nvme_ctrl in set->driver_data nvme-tcp: use the tagset alloc/free helpers nvme-tcp: store the generic nvme_ctrl in set->driver_data ...
2022-09-25scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use"Damien Le Moal1-6/+7
This reverts commit 7ab4d2441b952977556672c2fe3f4c2a698cbb37 as it is breaking the mpt3sas driver on big-endian machines. Link: https://lore.kernel.org/r/20220916130111.168195-3-damien.lemoal@opensource.wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-25scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use"Damien Le Moal1-5/+5
This reverts commit b4efbec4c2a75b619fae4e8768be379e88c78687 as it is breaking the mpt3sas driver on big-endian machines. Link: https://lore.kernel.org/r/20220916130111.168195-2-damien.lemoal@opensource.wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-16scsi: mpt3sas: Fix return value check of dma_get_required_mask()Sreekanth Reddy1-1/+1
Fix the incorrect return value check of dma_get_required_mask(). Due to this incorrect check, the driver was always setting the DMA mask to 63 bit. Link: https://lore.kernel.org/r/20220913120538.18759-2-sreekanth.reddy@broadcom.com Fixes: ba27c5cf286d ("scsi: mpt3sas: Don't change the DMA coherent mask after allocations") Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-07scsi: mpt3sas: Fix use-after-free warningSreekanth Reddy1-1/+1
Fix the following use-after-free warning which is observed during controller reset: refcount_t: underflow; use-after-free. WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 Link: https://lore.kernel.org/r/20220906134908.1039-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-01scsi: mpt3sas: Update driver version to 43.100.00.00Sreekanth Reddy1-2/+2
Update driver version to 43.100.00.00. Link: https://lore.kernel.org/r/20220825075457.16422-5-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-01scsi: mpt3sas: Increase cmd_per_lun to 128Sreekanth Reddy1-1/+1
With cmd_per_lun value 7, a higher number of cache lines (map_nr) are needed while allocating sdev->budget_map which is not reasonable and hence increase the cmd_per_lun value to 128. Link: https://lore.kernel.org/r/20220825075457.16422-4-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-01scsi: mpt3sas: Fix trace buffer registration failedSreekanth Reddy1-0/+4
The ExtendedType field was set to 1 in the diag buffer register command and hence MPT Endpoint firmware is failing the request with Invalid Field IOCStatus. memset the request frame to zero before framing the diag buffer register command. Link: https://lore.kernel.org/r/20220825075457.16422-3-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-01scsi: mpt3sas: Don't change DMA mask while reallocating poolsSreekanth Reddy1-7/+14
When a pool crosses the 4GB boundary region then before reallocating pools change the coherent DMA mask to 32 bits and keep the normal DMA mask set to 63/64 bits. Link: https://lore.kernel.org/r/20220825075457.16422-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-01scsi: mpt3sas: Prevent error handler escalation when device removedSreekanth Reddy1-0/+13
If SCSI error handling is taking place for timed out I/Os on a drive and the corresponding drive is removed, then stop escalating to higher level of reset by returning the TUR with "I_T NEXUS LOSS OCCURRED" sense key. Link: https://lore.kernel.org/r/20220816080801.13929-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-01scsi: mpt3sas: Disable MPI2_FUNCTION_FW_DOWNLOAD for ATTO devicesBradley Grove1-0/+8
Disable firmware download for ATTO devices where it is not supported. Link: https://lore.kernel.org/r/20220805174609.14830-2-bgrove@attotech.com Co-developed-by: Rob Crispo <rcrispo@attotech.com> Signed-off-by: Rob Crispo <rcrispo@attotech.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-09-01scsi: mpt3sas: Add support for ATTO ExpressSAS H12xx GT devicesBradley Grove5-6/+333
Add ATTO's PCI IDs and modify the driver to handle the unique NVRAM structure used by ATTO's devices. Link: https://lore.kernel.org/r/20220805174609.14830-1-bgrove@attotech.com Co-developed-by: Rob Crispo <rcrispo@attotech.com> Signed-off-by: Rob Crispo <rcrispo@attotech.com> Signed-off-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-08-22block: Change the return type of blk_mq_map_queues() into voidBart Van Assche1-3/+2
Since blk_mq_map_queues() and the .map_queues() callbacks always return 0, change their return type into void. Most callers ignore the returned value anyway. Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Wang <jasowang@redhat.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Acked-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Link: https://lore.kernel.org/r/20220815170043.19489-3-bvanassche@acm.org [axboe: fold in fix from Bart] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2-6/+5
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi, mpi3mr). The main driver change that might cause issues on down the road is the conversion of some of our oldest surviving drivers to the DMA API (should only affect m68k). The only major core change is the rework of async resume; the rest are either completely trivial or for updating deprecated APIs" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits) scsi: target: Remove XDWRITEREAD emulated support scsi: megaraid: Remove the static variable initialisation scsi: ch: Do not initialise statics to 0 scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot" scsi: target: iscsi: Do not require target authentication scsi: target: iscsi: Allow AuthMethod=None scsi: target: iscsi: Support base64 in CHAP scsi: target: iscsi: Add support for extended CDB AHS scsi: ufs: dt-bindings: Add SC8280XP binding scsi: target: iscsi: Fix clang -Wformat warnings scsi: ufs: core: Read device property for ref clock scsi: libsas: Resume SAS host for phy reset or enable via sysfs scsi: hisi_sas: Modify v3 HW SATA completion error processing scsi: hisi_sas: Relocate DMA unmap of SMP task scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw() scsi: mpi3mr: Delete a stray tab scsi: mpi3mr: Unlock on error path scsi: mpi3mr: Reduce VD queue depth on detecting throttling scsi: mpi3mr: Resource Based Metering ...
2022-07-27scsi: mpt3sas: Stop fw fault watchdog work item during system shutdownDavid Jeffery1-0/+1
During system shutdown or reboot, mpt3sas will reset the firmware back to ready state. However, the driver leaves running a watchdog work item intended to keep the firmware in operational state. This causes a second, unneeded reset on shutdown and moves the firmware back to operational instead of in ready state as intended. And if the mpt3sas_fwfault_debug module parameter is set, this extra reset also panics the system. mpt3sas's scsih_shutdown needs to stop the watchdog before resetting the firmware back to ready state. Link: https://lore.kernel.org/r/20220722142448.6289-1-djeffery@redhat.com Fixes: fae21608c31c ("scsi: mpt3sas: Transition IOC to Ready state during shutdown") Tested-by: Laurence Oberman <loberman@redhat.com> Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-08Merge branch '5.19/scsi-fixes' into 5.20/scsi-stagingMartin K. Petersen1-11/+12
Bring in fixes to resolve a merge conflict in the lpfc driver update. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-22scsi: mpt3sas: Remove flush_scheduled_work() callTetsuo Handa1-1/+0
It seems to me that mpt3sas driver is using dedicated workqueues and is not calling schedule{,_delayed}_work{,_on}(). Then, there will be no work to flush using flush_scheduled_work(). Link: https://lore.kernel.org/r/f3b97c7c-1094-4e46-20d8-4321716d6f3f@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-22scsi: mpt3sas: Fix whitespace and spelling mistakeZhang Jiaming1-4/+4
There is a spelling mistake in _base_sas_ioc_info(). Change 'cant' to 'can't'. Also fix up whitespace. Link: https://lore.kernel.org/r/20220617101103.3162-1-jiaming@nfschina.com Signed-off-by: Zhang Jiaming <jiaming@nfschina.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-22scsi: mpt3sas: Fix typo in commentRen Yu1-1/+1
Spelling mistake in comment: non-succesfull -> non-successful. Link: https://lore.kernel.org/r/20220617081557.9009-1-renyu@nfschina.com Signed-off-by: Ren Yu <renyu@nfschina.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-08scsi: mpt3sas: Fix out-of-bounds compiler warningHelge Deller1-11/+12
I'm facing this warning when building for the parisc64 architecture: drivers/scsi/mpt3sas/mpt3sas_base.c: In function ‘_base_make_ioc_operational’: drivers/scsi/mpt3sas/mpt3sas_base.c:5396:40: warning: array subscript ‘Mpi2SasIOUnitPage1_t {aka struct _MPI2_CONFIG_PAGE_SASIOUNIT_1}[0]’ is partly outside array bounds of ‘unsigned char[20]’ [-Warray-bounds] 5396 | (le16_to_cpu(sas_iounit_pg1->SASWideMaxQueueDepth)) ? drivers/scsi/mpt3sas/mpt3sas_base.c:5382:26: note: referencing an object of size 20 allocated by ‘kzalloc’ 5382 | sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); | ^~~~~~~~~~~~~~~~~~~~~~~ The problem is, that only 20 bytes are allocated with kmalloc(), which is sufficient to hold the bytes which are needed. Nevertheless, gcc complains because the whole Mpi2SasIOUnitPage1_t struct is 32 bytes in size and thus doesn't fit into those 20 bytes. This patch simply allocates all 32 bytes (instead of 20) and thus avoids the warning. There is no functional change introduced by this patch. While touching the code I cleaned up to calculation of max_wideport_qd, max_narrowport_qd and max_sata_qd to make it easier readable. Test successfully tested on a HP C8000 PA-RISC workstation with 64-bit kernel. Link: https://lore.kernel.org/r/YpZ197iZdDZSCzrT@p100 Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-20scsi: mpt3sas: Update driver version to 42.100.00.00Sreekanth Reddy1-2/+2
Update driver version to 42.100.00.00. Link: https://lore.kernel.org/r/20220511072621.30657-2-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-20scsi: mpt3sas: Fix junk chars displayed while printing ChipNameSreekanth Reddy1-1/+1
Terminate string after copying 16 bytes of ChipName data from Manufacturing Page0 to prevent %s from printing junk characters. Link: https://lore.kernel.org/r/20220511072621.30657-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-05-02scsi: mpt3sas: Use cached ATA Information VPD pageMartin K. Petersen1-10/+8
We now cache VPD page 0x89 (ATA Information) so there is no need to request it from the hardware. Make mpt3sas use the cached page. Link: https://lore.kernel.org/r/20220302053559.32147-2-martin.petersen@oracle.com Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-26scsi: mpt3sas: Fix adapter replyPostRegisterIndex declarationDamien Le Moal2-5/+6
The replyPostRegisterIndex array of struct MPT3SAS_ADAPTER stores iomem resource addresses. Fix its declaration to annotate it with __iomem to avoid sparse warnings for writel() calls using the stored addresses. Link: https://lore.kernel.org/r/20220307234854.148145-6-damien.lemoal@opensource.wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-26scsi: mpt3sas: Fix event callback log_code value handlingDamien Le Moal1-3/+3
In mpt3sas_scsih_event_callback(), fix a sparse warning when testing the event log code value by replacing the use of a pointer to the address storing the event log code with a log code local variable. Doing so, le32_to_cpu() is used when the log code value is assigned, avoiding a sparse warning. Link: https://lore.kernel.org/r/20220307234854.148145-5-damien.lemoal@opensource.wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-26scsi: mpt3sas: Fix ioc->base_readl() useDamien Le Moal1-7/+6
The functions _base_readl_aero() and _base_readl() used for an adapter base_readl() method are implemented using a regular readl() call which internally performs a conversion to CPU endianness (le32_to_cpu()) of the values read. The users of the ioc base_readl() method should thus not convert again the values read using le16_to_cpu(). Fixing this removes sparse warnings. Link: https://lore.kernel.org/r/20220307234854.148145-4-damien.lemoal@opensource.wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-26scsi: mpt3sas: Fix writel() useDamien Le Moal1-5/+5
writel() internally executes cpu_to_le32() to convert the value being written to little endian. The caller should thus not use this conversion function for the value passed to writel(). Remove the cpu_to_le32() calls in _base_put_smid_scsi_io_atomic(), _base_put_smid_fast_path_atomic(), _base_put_smid_hi_priority_atomic() _base_put_smid_default_atomic() and _base_handshake_req_reply_wait(). Link: https://lore.kernel.org/r/20220307234854.148145-3-damien.lemoal@opensource.wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-26scsi: mpt3sas: Fix _ctl_set_task_mid() TaskMID checkDamien Le Moal1-5/+6
The TaskMID field of struct Mpi2SCSITaskManagementRequest_t is a 16-bit little endian value. Fix the search loop in _ctl_set_task_mid() to add a cpu_to_le16() conversion before checking the value of TaskMID to avoid sparse warnings. While at it, simplify the search loop code to remove an unnecessarily complicated if condition. Link: https://lore.kernel.org/r/20220307234854.148145-2-damien.lemoal@opensource.wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-08 19:24:09 +0300