| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit e118df492320176af94deec000ae034cc92be754 ]
Smatch reports a warning as follows:
drivers/scsi/snic/snic_disc.c:307 snic_tgt_create() warn:
'&tgt->list' not removed from list
If device_add() fails in snic_tgt_create(), tgt will be freed, but
tgt->list will not be removed from snic->disc.tgt_list, then list traversal
may cause UAF.
Remove from snic->disc.tgt_list before free().
Fixes: c8806b6c9e82 ("snic: driver for Cisco SCSI HBA")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221117035100.2944812-1-cuigaosheng1@huawei.com
Acked-by: Narsimhulu Musini <nmusini@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4155658cee394b22b24c6d64e49247bf26d95b92 ]
fcoe_init() calls fcoe_transport_attach(&fcoe_sw_transport), but when
fcoe_if_init() fails, &fcoe_sw_transport is not detached and leaves freed
&fcoe_sw_transport on fcoe_transports list. This causes panic when
reinserting module.
BUG: unable to handle page fault for address: fffffbfff82e2213
RIP: 0010:fcoe_transport_attach+0xe1/0x230 [libfcoe]
Call Trace:
<TASK>
do_one_initcall+0xd0/0x4e0
load_module+0x5eee/0x7210
...
Fixes: 78a582463c1e ("[SCSI] fcoe: convert fcoe.ko to become an fcoe transport provider driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221115092442.133088-1-chenzhongjin@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6f108bffc3708ddcff72324f7d40dfcd0204894 ]
ipr_init() will not call unregister_reboot_notifier() when
pci_register_driver() fails, which causes a WARNING. Call
unregister_reboot_notifier() when pci_register_driver() fails.
notifier callback ipr_halt [ipr] already registered
WARNING: CPU: 3 PID: 299 at kernel/notifier.c:29
notifier_chain_register+0x16d/0x230
Modules linked in: ipr(+) xhci_pci_renesas xhci_hcd ehci_hcd usbcore
led_class gpu_sched drm_buddy video wmi drm_ttm_helper ttm
drm_display_helper drm_kms_helper drm drm_panel_orientation_quirks
agpgart cfbft
CPU: 3 PID: 299 Comm: modprobe Tainted: G W
6.1.0-rc1-00190-g39508d23b672-dirty #332
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:notifier_chain_register+0x16d/0x230
Call Trace:
<TASK>
__blocking_notifier_chain_register+0x73/0xb0
ipr_init+0x30/0x1000 [ipr]
do_one_initcall+0xdb/0x480
do_init_module+0x1cf/0x680
load_module+0x6a50/0x70a0
__do_sys_finit_module+0x12f/0x1c0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: f72919ec2bbb ("[SCSI] ipr: implement shutdown changes and remove obsolete write cache parameter")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221113064513.14028-1-shangxiaojing@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6d773f93a49e0eda88a903a2a6542ca83380eb1 ]
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id
string array"), the name of device is allocated dynamically, it needs be
freed when device_register() returns error.
As comment of device_register() says, one should use put_device() to give
up the reference in the error path. Fix this by calling put_device(), then
the name can be freed in kobject_cleanup(), and sdbg_host is freed in
sdebug_release_adapter().
When the device release is not set, it means the device is not initialized.
We can not call put_device() in this case. Use kfree() to free memory.
Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221112131010.3757845-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 47b6a122c7b69a876c7ee2fc064a26b09627de9d ]
If device_register() returns an error, the name allocated by dev_set_name()
needs to be freed. As the comment of device_register() says, one should use
put_device() to give up the reference in the error path. Fix this by
calling put_device(), then the name can be freed in kobject_cleanup().
The 'fcf' is freed in fcoe_fcf_device_release(), so the kfree() in the
error path can be removed.
The 'ctlr' is freed in fcoe_ctlr_device_release(), so don't use the error
label, just return NULL after calling put_device().
Fixes: 9a74e884ee71 ("[SCSI] libfcoe: Add fcoe_sysfs")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221112094310.3633291-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07f2ca139d9a7a1ba71c4c03997c8de161db2346 ]
As 'alloc_len' is user controlled data, if user tries to allocate memory
larger than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack
trace and messes up dmesg with a warning.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: 7db0e0c8190a ("scsi: scsi_debug: Fix buffer size of REPORT ZONES command")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221112070612.2121535-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed0f17b748b20271cb568c7ca0b23b120316a47d ]
As 'vnum' is controlled by user, so if user tries to allocate memory larger
than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack trace and
messes up dmesg with a warning.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: c3e2fe9222d4 ("scsi: scsi_debug: Implement VERIFY(10), add VERIFY(16)")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221112070031.2121068-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fda34a5d304d0b98cc967e8763b52221b66dc202 ]
If hpsa_sas_port_add_rphy() returns an error, the 'rphy' allocated in
sas_end_device_alloc() needs to be freed. Address this by calling
sas_rphy_free() in the error path.
Fixes: d04e62b9d63a ("hpsa: add in sas transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221111043012.1074466-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4ef174a3ad9b5d73c1b6573e244ebba2b0d86eac ]
hpsa_sas_port_add_phy() does:
...
sas_phy_add() -> may return error here
sas_port_add_phy()
...
Whereas hpsa_free_sas_phy() does:
...
sas_port_delete_phy()
sas_phy_delete()
...
If hpsa_sas_port_add_phy() returns an error, hpsa_free_sas_phy() can not be
called to free the memory because the port and the phy have not been added
yet.
Replace hpsa_free_sas_phy() with sas_phy_free() and kfree() to avoid kernel
crash in this case.
Fixes: d04e62b9d63a ("hpsa: add in sas transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221110151129.394389-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 78316e9dfc24906dd474630928ed1d3c562b568e ]
In mpt3sas_transport_port_add(), if sas_rphy_add() returns error,
sas_rphy_free() needs be called to free the resource allocated in
sas_end_device_alloc(). Otherwise a kernel crash will happen:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108
CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G W 6.1.0-rc1+ #189
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x54/0x3d0
lr : device_del+0x37c/0x3d0
Call trace:
device_del+0x54/0x3d0
attribute_container_class_device_del+0x28/0x38
transport_remove_classdev+0x6c/0x80
attribute_container_device_trigger+0x108/0x110
transport_remove_device+0x28/0x38
sas_rphy_remove+0x50/0x78 [scsi_transport_sas]
sas_port_delete+0x30/0x148 [scsi_transport_sas]
do_sas_phy_delete+0x78/0x80 [scsi_transport_sas]
device_for_each_child+0x68/0xb0
sas_remove_children+0x30/0x50 [scsi_transport_sas]
sas_rphy_remove+0x38/0x78 [scsi_transport_sas]
sas_port_delete+0x30/0x148 [scsi_transport_sas]
do_sas_phy_delete+0x78/0x80 [scsi_transport_sas]
device_for_each_child+0x68/0xb0
sas_remove_children+0x30/0x50 [scsi_transport_sas]
sas_remove_host+0x20/0x38 [scsi_transport_sas]
scsih_remove+0xd8/0x420 [mpt3sas]
Because transport_add_device() is not called when sas_rphy_add() fails, the
device is not added. When sas_rphy_remove() is subsequently called to
remove the device in the remove() path, a NULL pointer dereference happens.
Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221109032403.1636422-1-yangyingliang@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9c9ff300e0de07475796495d86f449340d454a0c ]
The hpda_alloc_ctlr_info() allocates h and its field reply_map. However, in
hpsa_init_one(), if alloc_percpu() failed, the hpsa_init_one() jumps to
clean1 directly, which frees h and leaks the h->reply_map.
Fix by calling hpda_free_ctlr_info() to release h->replay_map and h instead
free h directly.
Fixes: 8b834bff1b73 ("scsi: hpsa: fix selection of reply queue")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221122015751.87284-1-yuancan@huawei.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 216e179724c1d9f57a8ababf8bd7aaabef67f01b ]
As 'lbdof_blen' is coming from user, if the size in kzalloc() is >=
MAX_ORDER then we hit a warning.
Call trace:
sg_ioctl
sg_ioctl_common
scsi_ioctl
sg_scsi_ioctl
blk_execute_rq
blk_mq_sched_insert_request
blk_mq_run_hw_queue
__blk_mq_delay_run_hw_queue
__blk_mq_run_hw_queue
blk_mq_sched_dispatch_requests
__blk_mq_sched_dispatch_requests
blk_mq_dispatch_rq_list
scsi_queue_rq
scsi_dispatch_cmd
scsi_debug_queuecommand
schedule_resp
resp_write_scat
If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc()
will definitely fail. It creates a stack trace and messes up dmesg. The
user controls the size here so if they specify a too large size it will
fail.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: 481b5e5c7949 ("scsi: scsi_debug: add resp_write_scat function")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221111100526.1790533-1-harshit.m.mogalapalli@oracle.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 978b7922d3dca672b41bb4b8ce6c06ab77112741 ]
If there is a race between scsi_done() and scsi_timeout() and if
scsi_timeout() loses the race, scsi_timeout() should not reset the request
timer. Hence change the return value for this case from BLK_EH_RESET_TIMER
into BLK_EH_DONE.
Although the block layer holds a reference on a request (req->ref) while
calling a timeout handler, restarting the timer (blk_add_timer()) while a
request is being completed is racy.
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221018202958.1902564-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b8a5376c321b4669f7ffabc708fd30c3970f3084 ]
Current handling of the srb_status is incorrect. Commit 52e1b3b3daa9
("scsi: storvsc: Correctly handle multiple flags in srb_status")
is based on srb_status being a set of flags, when in fact only the
2 high order bits are flags and the remaining 6 bits are an integer
status. Because the integer values of interest mostly look like flags,
the code actually works when treated that way.
But in the interest of correctness going forward, fix this by treating
the low 6 bits of srb_status as an integer status code. Add handling
for SRB_STATUS_INVALID_REQUEST, which was the original intent of commit
52e1b3b3daa9. Furthermore, treat the ERROR, ABORTED, and INVALID_REQUEST
srb status codes as essentially equivalent for the cases we care about.
There's no harm in doing so, and it isn't always clear which status code
current or older versions of Hyper-V report for particular conditions.
Treating the srb status codes as equivalent has the additional benefit
of ensuring that capacity change events result in an immediate rescan
so that the new size is known to Linux. Existing code checks SCSI
sense data for capacity change events when the srb status is ABORTED.
But capacity change events are also being observed when Hyper-V reports
the srb status as ERROR. Without the immediate rescan, the new size
isn't known until something else causes a rescan (such as running
fdisk to expand a partition), and in the meantime, tools such as "lsblk"
continue to report the old size.
Fixes: 52e1b3b3daa9 ("scsi: storvsc: Correctly handle multiple flags in srb_status")
Reported-by: Juan Tian <juantian@microsoft.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1668019722-1983-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ecb8c2580d37dbb641451049376d80c8afaa387f ]
From ZBC-1:
- RC BASIS = 0: The RETURNED LOGICAL BLOCK ADDRESS field indicates the
highest LBA of a contiguous range of zones that are not sequential write
required zones starting with the first zone.
- RC BASIS = 1: The RETURNED LOGICAL BLOCK ADDRESS field indicates the LBA
of the last logical block on the logical unit.
The current scsi_debug READ CAPACITY response does not comply with the
above if there are one or more sequential write required zones. SCSI
initiators need a way to retrieve the largest valid LBA from SCSI
devices. Reporting the largest valid LBA if there are one or more
sequential zones requires to set the RC BASIS field in the READ CAPACITY
response to one. Hence this patch.
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221102193248.3177608-1-bvanassche@acm.org
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 62fa3ce05d5d73c5eccc40b2db493f55fecfc446 ]
Fix an issue reported when performing a live migration when multipath is
configured with a short fast fail timeout of 5 seconds and also to have
no_path_retry set to fail. In this scenario, all paths would go into the
devloss state while the ibmvfc driver went through discovery to log back
in. On a loaded system, the discovery might take longer than 5 seconds,
which was resulting in all paths being marked failed, which then resulted
in a read only filesystem.
This patch changes the migration code in ibmvfc to avoid deleting rports at
all in this scenario, so we avoid losing all paths.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20221026181356.148517-1-brking@linux.vnet.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d7bebf2dfb0dc97aac1fbace0910e557ecdb16f ]
If transport_add_device() fails in sas_phy_add(), the kernel will crash
trying to delete the device in transport_remove_device() called from
sas_remove_host().
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108
CPU: 61 PID: 42829 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc1+ #173
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x54/0x3d0
lr : device_del+0x37c/0x3d0
Call trace:
device_del+0x54/0x3d0
attribute_container_class_device_del+0x28/0x38
transport_remove_classdev+0x6c/0x80
attribute_container_device_trigger+0x108/0x110
transport_remove_device+0x28/0x38
sas_phy_delete+0x30/0x60 [scsi_transport_sas]
do_sas_phy_delete+0x6c/0x80 [scsi_transport_sas]
device_for_each_child+0x68/0xb0
sas_remove_children+0x40/0x50 [scsi_transport_sas]
sas_remove_host+0x20/0x38 [scsi_transport_sas]
hisi_sas_remove+0x40/0x68 [hisi_sas_main]
hisi_sas_v2_remove+0x20/0x30 [hisi_sas_v2_hw]
platform_remove+0x2c/0x60
Fix this by checking and handling return value of transport_add_device()
in sas_phy_add().
Fixes: c7ebbbce366c ("[SCSI] SAS transport class")
Suggested-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221107124828.115557-1-yangyingliang@huawei.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]
If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2331ce6126be8864b39490e705286b66e2344aac ]
Userspace can currently write to sysfs to transition sdev_state to RUNNING
or OFFLINE from any source state. This causes issues because proper
transitioning out of some states involves steps besides just changing
sdev_state, so allowing userspace to change sdev_state regardless of the
source state can result in inconsistencies; e.g. with ISCSI we can end up
with sdev_state == SDEV_RUNNING while the device queue is quiesced. Any
task attempting I/O on the device will then hang, and in more recent
kernels, iscsid will hang as well.
More detail about this bug is provided in my first attempt:
https://groups.google.com/g/open-iscsi/c/PNKca4HgPDs/m/CXaDkntOAQAJ
Link: https://lore.kernel.org/r/20220924000241.2967323-1-ushankar@purestorage.com
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Suggested-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This reverts commit 84f7a9de0602704bbec774a6c7f7c8c4994bee9c.
Because it introduces a problem that rq->__data_len is set to the wrong
value.
before the patch:
1) nr_bytes = rq->__data_len
2) rq->__data_len = sdp->sector_size
3) scsi_init_io()
4) rq->__data_len = nr_bytes
after the patch:
1) rq->__data_len = sdp->sector_size
2) scsi_init_io()
3) rq->__data_len = rq->__data_len -> __data_len is wrong
It will cause that io can only complete one segment each time, and the io
will requeue in scsi_io_completion_action(), which will cause severe
performance degradation.
Scsi write same is removed in commit e383e16e84e9 ("scsi: sd: Remove
WRITE_SAME support") from mainline, hence this patch is only needed for
stable kernels.
Fixes: 84f7a9de0602 ("scsi: sd: Remove a local variable")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0b863257c17c5f57a41e0a48de140ed026957a63 upstream.
One of the sysfs values reported for supported_speeds was not valid (20Gb/s
reported instead of 64Gb/s). Instead of driver internal speed mask
definition, use speed mask defined in transport_fc for reporting
host->supported_speeds.
Link: https://lore.kernel.org/r/20220927115946.17559-1-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7eff437b5ee1309b34667844361c6bbb5c97df05 ]
The original code will "goto out_disable_device" and call
pci_disable_device() if pci_enable_device() fails. The kernel will generate
a warning message like "3w-9xxx 0000:00:05.0: disabling already-disabled
device".
We shouldn't disable a device that failed to be enabled. A simple return is
fine.
Link: https://lore.kernel.org/r/20220829110115.38789-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 57569c37f0add1b6489e1a1563c71519daf732cf ]
Fix a NULL pointer crash that occurs when we are freeing the socket at the
same time we access it via sysfs.
The problem is that:
1. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() take
the frwd_lock and do sock_hold() then drop the frwd_lock. sock_hold()
does a get on the "struct sock".
2. iscsi_sw_tcp_release_conn() does sockfd_put() which does the last put
on the "struct socket" and that does __sock_release() which sets the
sock->ops to NULL.
3. iscsi_sw_tcp_conn_get_param() and iscsi_sw_tcp_host_get_param() then
call kernel_getpeername() which accesses the NULL sock->ops.
Above we do a get on the "struct sock", but we needed a get on the "struct
socket". Originally, we just held the frwd_lock the entire time but in
commit bcf3a2953d36 ("scsi: iscsi: iscsi_tcp: Avoid holding spinlock while
calling getpeername()") we switched to refcount based because the network
layer changed and started taking a mutex in that path, so we could no
longer hold the frwd_lock.
Instead of trying to maintain multiple refcounts, this just has us use a
mutex for accessing the socket in the interface code paths.
Link: https://lore.kernel.org/r/20220907221700.10302-1-michael.christie@oracle.com
Fixes: bcf3a2953d36 ("scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 46ba53c30666717cb06c2b3c5d896301cd00d0c0 ]
When executing SMP task failed, the smp_execute_task_sg() calls del_timer()
to delete "slow_task->timer". However, if the timer handler
sas_task_internal_timedout() is running, the del_timer() in
smp_execute_task_sg() will not stop it and a UAF will happen. The process
is shown below:
(thread 1) | (thread 2)
smp_execute_task_sg() | sas_task_internal_timedout()
... |
del_timer() |
... | ...
sas_free_task(task) |
kfree(task->slow_task) //FREE|
| task->slow_task->... //USE
Fix by calling del_timer_sync() in smp_execute_task_sg(), which makes sure
the timer handler have finished before the "task->slow_task" is
deallocated.
Link: https://lore.kernel.org/r/20220920144213.10536-1-duoming@zju.edu.cn
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 592642e6b11e620e4b43189f8072752429fc8dc3 upstream.
Few vport parameters were displayed by systool as 'Unknown' or 'NULL'.
Copy speed, supported_speed, frame_size and update port_type for NPIV port.
Link: https://lore.kernel.org/r/20220919134434.3513-1-njavali@marvell.com
Cc: stable@vger.kernel.org
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6022f210461fef67e6e676fd8544ca02d1bcfa7a upstream.
The passthrough structure is declared off of the stack, so it needs to be
set to zero before copied back to userspace to prevent any unintentional
data leakage. Switch things to be statically allocated which will fill the
unused fields with 0 automatically.
Link: https://lore.kernel.org/r/YxrjN3OOw2HHl9tx@kroah.com
Cc: stable@kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: hdthky <hdthky0@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fbfe96869b782364caebae0445763969ddb6ea67 ]
In __qedf_probe(), if qedf->cdev is NULL which means
qed_ops->common->probe() failed, then the program will goto label err1, and
scsi_host_put() will free lport->host pointer. Because the memory qedf
points to is allocated by libfc_host_alloc(), it will be freed by
scsi_host_put(). However, the if statement below label err0 only checks
whether qedf is NULL but doesn't check whether the memory has been freed.
So a UAF bug can occur.
There are two ways to reach the statements below err0. The first one is
described as before, "qedf" should be set to NULL. The second one is goto
"err0" directly. In the latter scenario qedf hasn't been changed and it has
the initial value NULL. As a result the if statement is not reachable in
any situation.
The KASAN logs are as follows:
[ 2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0
[ 2.312969]
[ 2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 2.312969] Call Trace:
[ 2.312969] dump_stack_lvl+0x59/0x7b
[ 2.312969] print_address_description+0x7c/0x3b0
[ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0
[ 2.312969] __kasan_report+0x160/0x1c0
[ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0
[ 2.312969] kasan_report+0x4b/0x70
[ 2.312969] ? kobject_put+0x25d/0x290
[ 2.312969] kasan_check_range+0x2ca/0x310
[ 2.312969] __qedf_probe+0x5dcf/0x6bc0
[ 2.312969] ? selinux_kernfs_init_security+0xdc/0x5f0
[ 2.312969] ? trace_rpm_return_int_rcuidle+0x18/0x120
[ 2.312969] ? rpm_resume+0xa5c/0x16e0
[ 2.312969] ? qedf_get_generic_tlv_data+0x160/0x160
[ 2.312969] local_pci_probe+0x13c/0x1f0
[ 2.312969] pci_device_probe+0x37e/0x6c0
Link: https://lore.kernel.org/r/20211112120641.16073-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Co-developed-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This reverts commit 24cd0b9bfdff126c066032b0d40ab0962d35e777.
1) commit 4e89dce72521 ("iommu/iova: Retry from last rb tree node if
iova search fails") tries to fix that iova allocation can fail while
there are still free space available. This is not backported to 5.10
stable.
2) commit fce54ed02757 ("scsi: hisi_sas: Limit max hw sectors for v3
HW") fix the performance regression introduced by 1), however, this
is just a temporary solution and will cause io performance regression
because it limit max io size to PAGE_SIZE * 32(128k for 4k page_size).
3) John Garry posted a patchset to fix the problem.
4) The temporary solution is reverted.
It's weird that the patch in 2) is backported to 5.10 stable alone,
while the right thing to do is to backport them all together.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e0e0747de0ea3dd87cdbb0393311e17471a9baf1 ]
Fix the incorrect return value check of dma_get_required_mask(). Due to
this incorrect check, the driver was always setting the DMA mask to 63 bit.
Link: https://lore.kernel.org/r/20220913120538.18759-2-sreekanth.reddy@broadcom.com
Fixes: ba27c5cf286d ("scsi: mpt3sas: Don't change the DMA coherent mask after allocations")
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d6adc251dd2fede6aaaf6c39f7e4ad799eda3758 ]
According to the MPI specification, PCIe SGL buffers can not cross a 4 GB
boundary.
While allocating, if any buffer crosses the 4 GB boundary, then:
- Release the already allocated memory pools; and
- Reallocate them by changing the DMA coherent mask to 32-bit
Link: https://lore.kernel.org/r/20210305102904.7560-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: e0e0747de0ea ("scsi: mpt3sas: Fix return value check of dma_get_required_mask()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit da6d507f5ff328f346b3c50e19e19993027b8ffd upstream.
Add the missing destroy_workqueue() before return from
lpfc_sli4_driver_resource_setup() in the error path.
Link: https://lore.kernel.org/r/20220823044237.285643-1-yangyingliang@huawei.com
Fixes: 3cee98db2610 ("scsi: lpfc: Fix crash on driver unload in wq free")
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 991df3dd5144f2e6b1c38b8d20ed3d4d21e20b34 upstream.
Fix the following use-after-free warning which is observed during
controller reset:
refcount_t: underflow; use-after-free.
WARNING: CPU: 23 PID: 5399 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0
Link: https://lore.kernel.org/r/20220906134908.1039-2-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8c499e49240bd93628368c3588975cfb94169b8b ]
When allocating log_to_span fails, kfree(instance->ctrl_context) is called
twice. Remove redundant call.
Link: https://lore.kernel.org/r/1659424729-46502-1-git-send-email-kanie@linux.alibaba.com
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 53661ded2460b414644532de6b99bd87f71987e9 ]
This partially reverts commit d2b292c3f6fd ("scsi: qla2xxx: Enable ATIO
interrupt handshake for ISP27XX")
For some workloads where the host sends a batch of commands and then
pauses, ATIO interrupt coalesce can cause some incoming ATIO entries to be
ignored for extended periods of time, resulting in slow performance,
timeouts, and aborted commands.
Disable interrupt coalesce and re-enable the dedicated ATIO MSI-X
interrupt.
Link: https://lore.kernel.org/r/97dcf365-89ff-014d-a3e5-1404c6af511c@cybernetics.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d957e7ffb2c72410bcc1a514153a46719255a5da upstream.
storvsc_error_wq workqueue should not be marked as WQ_MEM_RECLAIM as it
doesn't need to make forward progress under memory pressure. Marking this
workqueue as WQ_MEM_RECLAIM may cause deadlock while flushing a
non-WQ_MEM_RECLAIM workqueue. In the current state it causes the following
warning:
[ 14.506347] ------------[ cut here ]------------
[ 14.506354] workqueue: WQ_MEM_RECLAIM storvsc_error_wq_0:storvsc_remove_lun is flushing !WQ_MEM_RECLAIM events_freezable_power_:disk_events_workfn
[ 14.506360] WARNING: CPU: 0 PID: 8 at <-snip->kernel/workqueue.c:2623 check_flush_dependency+0xb5/0x130
[ 14.506390] CPU: 0 PID: 8 Comm: kworker/u4:0 Not tainted 5.4.0-1086-azure #91~18.04.1-Ubuntu
[ 14.506391] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022
[ 14.506393] Workqueue: storvsc_error_wq_0 storvsc_remove_lun
[ 14.506395] RIP: 0010:check_flush_dependency+0xb5/0x130
<-snip->
[ 14.506408] Call Trace:
[ 14.506412] __flush_work+0xf1/0x1c0
[ 14.506414] __cancel_work_timer+0x12f/0x1b0
[ 14.506417] ? kernfs_put+0xf0/0x190
[ 14.506418] cancel_delayed_work_sync+0x13/0x20
[ 14.506420] disk_block_events+0x78/0x80
[ 14.506421] del_gendisk+0x3d/0x2f0
[ 14.506423] sr_remove+0x28/0x70
[ 14.506427] device_release_driver_internal+0xef/0x1c0
[ 14.506428] device_release_driver+0x12/0x20
[ 14.506429] bus_remove_device+0xe1/0x150
[ 14.506431] device_del+0x167/0x380
[ 14.506432] __scsi_remove_device+0x11d/0x150
[ 14.506433] scsi_remove_device+0x26/0x40
[ 14.506434] storvsc_remove_lun+0x40/0x60
[ 14.506436] process_one_work+0x209/0x400
[ 14.506437] worker_thread+0x34/0x400
[ 14.506439] kthread+0x121/0x140
[ 14.506440] ? process_one_work+0x400/0x400
[ 14.506441] ? kthread_park+0x90/0x90
[ 14.506443] ret_from_fork+0x35/0x40
[ 14.506445] ---[ end trace 2d9633159fdc6ee7 ]---
Link: https://lore.kernel.org/r/1659628534-17539-1-git-send-email-ssengar@linux.microsoft.com
Fixes: 436ad9413353 ("scsi: storvsc: Allow only one remove lun work item to be issued per lun")
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6d17a112e9a63ff6a5edffd1676b99e0ffbcd269 upstream.
Link lost is treated as fatal error with commit c99b9b230149 ("scsi: ufs:
Treat link loss as fatal error"), but the event isn't registered as
interrupt source. Enable it.
Link: https://lore.kernel.org/r/1659404551-160958-1-git-send-email-kwmad.kim@samsung.com
Fixes: c99b9b230149 ("scsi: ufs: Treat link loss as fatal error")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f8191d40aa612981ce897e66cda6a88db8df17bb ]
Malformed user input to debugfs results in buffer overflow crashes. Adapt
input string lengths to fit within internal buffers, leaving space for NULL
terminators.
Link: https://lore.kernel.org/r/20220701211425.2708-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 58d1c124cd79ea686b512043c5bd515590b2ed95 upstream.
When a mix of FCP-2 (tape) and non-FCP-2 targets are present, FCP-2 target
state was incorrectly transitioned when both of the targets were gone. Fix
this by ignoring state transition for FCP-2 targets.
Link: https://lore.kernel.org/r/20220616053508.27186-7-njavali@marvell.com
Fixes: 44c57f205876 ("scsi: qla2xxx: Changes to support FCP2 Target")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2416ccd3815ba1613e10a6da0a24ef21acfe5633 upstream.
FCP-2 devices were not coming back online once they were lost, login
retries exhausted, and then came back up. Fix this by accepting RSCN when
the device is not online.
Link: https://lore.kernel.org/r/20220616053508.27186-10-njavali@marvell.com
Fixes: 44c57f205876 ("scsi: qla2xxx: Changes to support FCP2 Target")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f260694e6463b63ae550aad25ddefe94cb1904da upstream.
Clear wait for mailbox interrupt flag to prevent stale mailbox:
Feb 22 05:22:56 ltcden4-lp7 kernel: qla2xxx [0135:90:00.1]-500a:4: LOOP UP detected (16 Gbps).
Feb 22 05:22:59 ltcden4-lp7 kernel: qla2xxx [0135:90:00.1]-d04c:4: MBX Command timeout for cmd 69, ...
To fix the issue, driver needs to clear the MBX_INTR_WAIT flag on purging
the mailbox. When the stale mailbox completion does arrive, it will be
dropped.
Link: https://lore.kernel.org/r/20220616053508.27186-11-njavali@marvell.com
Fixes: b6faaaf796d7 ("scsi: qla2xxx: Serialize mailbox request")
Cc: Naresh Bannoth <nbannoth@in.ibm.com>
Cc: Kyle Mahlkuch <Kyle.Mahlkuch@ibm.com>
Cc: stable@vger.kernel.org
Reported-by: Naresh Bannoth <nbannoth@in.ibm.com>
Tested-by: Naresh Bannoth <nbannoth@in.ibm.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5304673bdb1635e27555bd636fd5d6956f1cd552 upstream.
For 8G adapters, multi-queue was enabled accidentally. Make sure
multi-queue is not enabled.
Link: https://lore.kernel.org/r/20220616053508.27186-5-njavali@marvell.com
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47ccb113cead905bdc236571bf8ac6fed90321b3 upstream.
A direct attach tape device, when gets swapped with another, was not
discovered. Fix this by looking at loop map and reinitialize link if there
are devices present.
Link: https://lore.kernel.org/linux-scsi/baef87c3-5dad-3b47-44c1-6914bfc90108@cybernetics.com/
Link: https://lore.kernel.org/r/20220713052045.10683-8-njavali@marvell.com
Cc: stable@vger.kernel.org
Reported-by: Tony Battersby <tonyb@cybernetics.com>
Tested-by: Tony Battersby <tonyb@cybernetics.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 69695aeaa6621bc49cdd7a8e5a8d1042461e496e ]
Correct a SOP READ and WRITE DMA flags for some requests.
This update corrects DMA direction issues with SCSI commands removed from
the controller's internal lookup table.
Currently, SCSI READ BLOCK LIMITS (0x5) was removed from the controller
lookup table and exposed a DMA direction flag issue.
SCSI READ BLOCK LIMITS was recently removed from our controller lookup
table so the controller uses the respective IU flag field to set the DMA
data direction. Since the DMA direction is incorrect the FW never completes
the request causing a hang.
Some SCSI commands which use SCSI READ BLOCK LIMITS
* sg_map
* mt -f /dev/stX status
After updating controller firmware, users may notice their tape units
failing. This patch resolves the issue.
Also, the AIO path DMA direction is correct.
The DMA direction flag is a day-one bug with no reported BZ.
Fixes: 6c223761eb54 ("smartpqi: initial commit of Microsemi smartpqi driver")
Link: https://lore.kernel.org/r/165730605618.177165.9054223644512926624.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6c96a3c7d49593ef15805f5e497601c87695abc9 upstream.
While requesting a new mailbox command, driver does not write any data to
unused registers. Initialize the unused register value to zero while
requesting a new mailbox command to prevent stale entry access by firmware.
Link: https://lore.kernel.org/r/20220713052045.10683-4-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bikash Hazarika <bhazarika@marvell.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cf3b4fb655796674e605268bd4bfb47a47c8bce6 upstream.
Replace display field with the correct field.
Link: https://lore.kernel.org/r/20220713052045.10683-3-njavali@marvell.com
Fixes: 8777e4314d39 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bikash Hazarika <bhazarika@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3455607fd7be10b449f5135c00dc306b85dc0d21 upstream.
When a SCSI device is removed while in active use, currently sg will
immediately return -ENODEV on any attempt to wait for active commands that
were sent before the removal. This is problematic for commands that use
SG_FLAG_DIRECT_IO since the data buffer may still be in use by the kernel
when userspace frees or reuses it after getting ENODEV, leading to
corrupted userspace memory (in the case of READ-type commands) or corrupted
data being sent to the device (in the case of WRITE-type commands). This
has been seen in practice when logging out of a iscsi_tcp session, where
the iSCSI driver may still be processing commands after the device has been
marked for removal.
Change the policy to allow userspace to wait for active sg commands even
when the device is being removed. Return -ENODEV only when there are no
more responses to read.
Link: https://lore.kernel.org/r/5ebea46f-fe83-2d0b-233d-d0dcb362dd0a@cybernetics.com
Cc: <stable@vger.kernel.org>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5bc7b01c513a4a9b4cfe306e8d1720cfcfd3b8a3 upstream.
This fixes the regression of NVMe discovery failure during driver load
time.
This reverts commit 6a45c8e137d4e2c72eecf1ac7cf64f2fdfcead99.
Link: https://lore.kernel.org/r/20220713052045.10683-2-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a3435afba87dc6cd83f5595e7607f3c40f93ef01 upstream.
In ufshcd_populate_vreg(), we should hold the reference returned by
of_parse_phandle() and then use it to call of_node_put() for refcount
balance.
Link: https://lore.kernel.org/r/20220719071529.1081166-1-windhl@126.com
Fixes: aa4976130934 ("ufs: Add regulator enable support")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fce54ed027577517df1e74b7d54dc2b1bd536887 ]
If the controller is behind an IOMMU then the IOMMU IOVA caching range can
affect performance, as discussed in [0].
Limit the max HW sectors to not exceed this limit. We need to hardcode the
value until a proper DMA mapping API is available.
[0] https://lore.kernel.org/linux-iommu/20210129092120.1482-1-thunder.leizhen@huawei.com/
Link: https://lore.kernel.org/r/1655988119-223714-1-git-send-email-john.garry@huawei.com
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 566d3c57eb526f32951af15866086e236ce1fc8a ]
When a write command to a sequential write required or sequential write
preferred zone result in the zone write pointer reaching the end of the
zone, the zone condition must be set to full AND the number of implicitly
or explicitly open zones updated to have a correct accounting for zone
resources. However, the function zbc_inc_wp() only sets the zone condition
to full without updating the open zone counters, resulting in a zone state
machine breakage.
Introduce the helper function zbc_set_zone_full() and use it in
zbc_inc_wp() to correctly transition zones to the full condition.
Link: https://lore.kernel.org/r/20220608011302.92061-1-damien.lemoal@opensource.wdc.com
Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
