Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"The bulk of the changes here are related to refactoring and expanding
the KUnit tests for string helper and fortify behavior.
Some trivial strncpy replacements in fs/ were carried in my tree. Also
some fixes to SCSI string handling were carried in my tree since the
helper for those was introduce here. Beyond that, just little fixes
all around: objtool getting confused about LKDTM+KCFI, preparing for
future refactors (constification of sysctl tables, additional
__counted_by annotations), a Clang UBSAN+i386 crash fix, and adding
more options in the hardening.config Kconfig fragment.
Summary:
- selftests: Add str*cmp tests (Ivan Orlov)
- __counted_by: provide UAPI for _le/_be variants (Erick Archer)
- Various strncpy deprecation refactors (Justin Stitt)
- stackleak: Use a copy of soon-to-be-const sysctl table (Thomas
Weißschuh)
- UBSAN: Work around i386 -regparm=3 bug with Clang prior to
version 19
- Provide helper to deal with non-NUL-terminated string copying
- SCSI: Fix older string copying bugs (with new helper)
- selftests: Consolidate string helper behavioral tests
- selftests: add memcpy() fortify tests
- string: Add additional __realloc_size() annotations for "dup"
helpers
- LKDTM: Fix KCFI+rodata+objtool confusion
- hardening.config: Enable KCFI"
* tag 'hardening-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (29 commits)
uapi: stddef.h: Provide UAPI macros for __counted_by_{le, be}
stackleak: Use a copy of the ctl_table argument
string: Add additional __realloc_size() annotations for "dup" helpers
kunit/fortify: Fix replaced failure path to unbreak __alloc_size
hardening: Enable KCFI and some other options
lkdtm: Disable CFI checking for perms functions
kunit/fortify: Add memcpy() tests
kunit/fortify: Do not spam logs with fortify WARNs
kunit/fortify: Rename tests to use recommended conventions
init: replace deprecated strncpy with strscpy_pad
kunit/fortify: Fix mismatched kvalloc()/vfree() usage
scsi: qla2xxx: Avoid possible run-time warning with long model_num
scsi: mpi3mr: Avoid possible run-time warning with long manufacturer strings
scsi: mptfusion: Avoid possible run-time warning with long manufacturer strings
fs: ecryptfs: replace deprecated strncpy with strscpy
hfsplus: refactor copy_name to not use strncpy
reiserfs: replace deprecated strncpy with scnprintf
virt: acrn: replace deprecated strncpy with strscpy
ubsan: Avoid i386 UBSAN handler crashes with Clang
ubsan: Remove 1-element array usage in debug reporting
...
|
|
Pull block updates from Jens Axboe:
- Add a partscan attribute in sysfs, fixing an issue with systemd
relying on an internal interface that went away.
- Attempt #2 at making long running discards interruptible. The
previous attempt went into 6.9, but we ended up mostly reverting it
as it had issues.
- Remove old ida_simple API in bcache
- Support for zoned write plugging, greatly improving the performance
on zoned devices.
- Remove the old throttle low interface, which has been experimental
since 2017 and never made it beyond that and isn't being used.
- Remove page->index debugging checks in brd, as it hasn't caught
anything and prepares us for removing in struct page.
- MD pull request from Song
- Don't schedule block workers on isolated CPUs
* tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux: (84 commits)
blk-throttle: delay initialization until configuration
blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW
block: fix that util can be greater than 100%
block: support to account io_ticks precisely
block: add plug while submitting IO
bcache: fix variable length array abuse in btree_iter
bcache: Remove usage of the deprecated ida_simple_xx() API
md: Revert "md: Fix overflow in is_mddev_idle"
blk-lib: check for kill signal in ioctl BLKDISCARD
block: add a bio_await_chain helper
block: add a blk_alloc_discard_bio helper
block: add a bio_chain_and_submit helper
block: move discard checks into the ioctl handler
block: remove the discard_granularity check in __blkdev_issue_discard
block/ioctl: prefer different overflow check
null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION()
block: fix and simplify blkdevparts= cmdline parsing
block: refine the EOF check in blkdev_iomap_begin
block: add a partscan sysfs attribute for disks
block: add a disk_has_partscan helper
...
|
|
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
Information is stored in mr_sas_port->phy_mask, values larger then size of
this field shouldn't be allowed.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20240226151013.8653-1-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.2
This patch set contains updates to log messaging, a bug fix related to
unloading of the driver, clean up patches regarding the abuse of a
global spinlock, and support for 32 byte CDBs.
Link: https://lore.kernel.org/r/20240429221547.6842-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update copyrights to 2024 for files modified in the 14.4.0.2 patch set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240429221547.6842-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Update lpfc version to 14.4.0.2
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240429221547.6842-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The driver's I/O path is updated to support 32 byte CDBs.
Changes to accommodate 32 byte CDBs include:
- Updating various size fields to allow for the larger 32 byte CDB.
- Starting the FCP command payload at an earlier offset in WQE submission
to fit the 32 byte CDB.
- Redefining relevant structs to __le32/__be32 data types for proper cpu
endianness macro usage.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240429221547.6842-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In attempt to reduce the amount of unnecessary phba->hbalock acquisitions
in the lpfc driver, change hba_flag into an unsigned long bitmask and use
clear_bit/test_bit bitwise atomic APIs instead of reliance on phba->hbalock
for synchronization.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240429221547.6842-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of using the generic object wide phba->hbalock, an explicit lock
should be used to synchronize mutations to the phba->active_rrq_list.
Update all accesses to the phba->active_rrq_list with a new
phba->rrq_list_lock.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240429221547.6842-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Device recovery logic is skipped when the RSCN processing flag is set.
However during rmmod, the flag is not cleared leading to unnecessary delays
in waiting for completions on a link that is being offlined.
Move clearing of the RSCN deferred flag to a refactored routine when called
from device recovery, and set the IA flag when issuing an abort during
unload.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240429221547.6842-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A struct scsi_cmnd already contains T10 DIF protection type information in
prot_type. So, instead of manually checking a CDBs' RD/WRPROTECT fields
with (byte[1] >> 5) utilize scsi_get_prot_type().
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240429221547.6842-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For diagnostic purposes, it is convenient to automatically log unexpected
CT MIB events without the need to set lpfc_log_verbose flags. So, change
lpfc_ct_handle_mibreq's logging level from KERN_INFO to KERN_WARNING.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240429221547.6842-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in bug fix update from 6.9/scsi-fixes to accommodate 14.4.0.2
series.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
I think the last use of this list was removed by
commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure
handling").
Build tested only.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240503232309.152320-1-linux@treblig.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
DebugFS output for fw_resource_count shows:
estimate exchange used[0] high water limit [1945] n estimate iocb2 used [0] high water limit [5141]
estimate exchange2 used[0] high water limit [1945]
Which shows incorrect display due to missing newline in seq_print().
[mkp: fix checkpatch warning about space before newline]
Fixes: 5f63a163ed2f ("scsi: qla2xxx: Fix exchange oversubscription for management commands")
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20240426020056.3639406-1-himanshu.madhani@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, we allocate a count-sized kernel buffer and copy count from
userspace to that buffer. Later, we use kstrtouint on this buffer but we
don't ensure that the string is terminated inside the buffer, this can
lead to OOB read when using kstrtouint. Fix this issue by using
memdup_user_nul instead of memdup_user.
Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-4-f1f1b53a10f4@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from
userspace to that buffer. Later, we use sscanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using sscanf. Fix this issue by using memdup_user_nul instead
of memdup_user.
Fixes: 9f30b674759b ("bfa: replace 2 kzalloc/copy_from_user by memdup_user")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-3-f1f1b53a10f4@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The prior strlcpy() replacement of strncpy() here (which was
later replaced with strscpy()) expected pinfo->model_num (and
pinfo->model_description) to be NUL-terminated, but it is possible
it was not, as the code pattern here shows vha->hw->model_number (and
vha->hw->model_desc) being exactly 1 character larger, and the replaced
strncpy() was copying only up to the size of the source character
array. Replace this with memtostr(), which is the unambiguous way to
convert a maybe not-NUL-terminated character array into a NUL-terminated
string.
Fixes: 527e9b704c3d ("scsi: qla2xxx: Use memcpy() and strlcpy() instead of strcpy() and strncpy()")
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240410023155.2100422-5-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The prior use of strscpy() here expected the manufacture_reply strings to
be NUL-terminated, but it is possible they are not, as the code pattern
here shows, e.g., edev->vendor_id being exactly 1 character larger than
manufacture_reply->vendor_id, and the strscpy() was copying only up to
the size of the source character array. Replace this with memtostr(),
which is the unambiguous way to convert a maybe not-NUL-terminated
character array into a NUL-terminated string.
Fixes: 2bd37e284914 ("scsi: mpi3mr: Add framework to issue MPT transport cmds")
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240410023155.2100422-4-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The variable 'i' is being assigned a value that is never read, the
following code path via the label ofld_err never refers to the
variable. The assignment is redundant and can be removed.
Cleans up clang scan warning:
drivers/scsi/bnx2fc/bnx2fc_tgt.c:132:5: warning: Value stored to 'i'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240415104311.484890-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The qedi_dbg_do_not_recover_cmd_read() function invokes sprintf() directly
on a __user pointer, which results into the crash.
To fix this issue, use a small local stack buffer for sprintf() and then
call simple_read_from_buffer(), which in turns make the copy_to_user()
call.
BUG: unable to handle page fault for address: 00007f4801111000
PGD 8000000864df6067 P4D 8000000864df6067 PUD 864df7067 PMD 846028067 PTE 0
Oops: 0002 [#1] PREEMPT SMP PTI
Hardware name: HPE ProLiant DL380 Gen10/ProLiant DL380 Gen10, BIOS U30 06/15/2023
RIP: 0010:memcpy_orig+0xcd/0x130
RSP: 0018:ffffb7a18c3ffc40 EFLAGS: 00010202
RAX: 00007f4801111000 RBX: 00007f4801111000 RCX: 000000000000000f
RDX: 000000000000000f RSI: ffffffffc0bfd7a0 RDI: 00007f4801111000
RBP: ffffffffc0bfd7a0 R08: 725f746f6e5f6f64 R09: 3d7265766f636572
R10: ffffb7a18c3ffd08 R11: 0000000000000000 R12: 00007f4881110fff
R13: 000000007fffffff R14: ffffb7a18c3ffca0 R15: ffffffffc0bfd7af
FS: 00007f480118a740(0000) GS:ffff98e38af00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4801111000 CR3: 0000000864b8e001 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x1a/0x60
? page_fault_oops+0x183/0x510
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x22/0x30
? memcpy_orig+0xcd/0x130
vsnprintf+0x102/0x4c0
sprintf+0x51/0x80
qedi_dbg_do_not_recover_cmd_read+0x2f/0x50 [qedi 6bcfdeeecdea037da47069eca2ba717c84a77324]
full_proxy_read+0x50/0x80
vfs_read+0xa5/0x2e0
? folio_add_new_anon_rmap+0x44/0xa0
? set_pte_at+0x15/0x30
? do_pte_missing+0x426/0x7f0
ksys_read+0xa5/0xe0
do_syscall_64+0x58/0x80
? __count_memcg_events+0x46/0x90
? count_memcg_event_mm+0x3d/0x60
? handle_mm_fault+0x196/0x2f0
? do_user_addr_fault+0x267/0x890
? exc_page_fault+0x69/0x150
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f4800f20b4d
Tested-by: Martin Hoyer <mhoyer@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Link: https://lore.kernel.org/r/20240415072155.30840-1-mrangankar@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Just rescanning a partition causes a print similar to the following to
appear:
[ 1.484964] sd 0:0:0:0: [sda] permanent stream count = 5
This is bothersome, so only print this message for an update.
Fixes: 4f53138fffc2 ("scsi: sd: Translate data lifetime information")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240412094407.496251-1-john.g.garry@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Stop calling smp_processor_id() from preemptible code in
qedf_execute_tmf90. This results in BUG_ON() when running an RT kernel.
[ 659.343280] BUG: using smp_processor_id() in preemptible [00000000] code: sg_reset/3646
[ 659.343282] caller is qedf_execute_tmf+0x8b/0x360 [qedf]
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Signed-off-by: John Meneghini <jmeneghi@redhat.com>
Link: https://lore.kernel.org/r/20240403150155.412954-1-jmeneghi@redhat.com
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
struct Scsi_Host private data contains pointer to struct ctlr_info.
Restore allocation of only 8 bytes to store pointer in struct Scsi_Host
private data area.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: bbbd25499100 ("scsi: hpsa: Fix allocation size for scsi_host_alloc()")
Signed-off-by: Yuri Karpov <YKarpov@ispras.ru>
Link: https://lore.kernel.org/r/20240312170447.743709-1-YKarpov@ispras.ru
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
zero-address to new port"
Xingui Yang <yangxingui@huawei.com> says:
This series is to solve the problem of a BUG() when adding phy with
zero address to a new port.
Link: https://lore.kernel.org/r/20240312141103.31358-1-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
As of commit 7d1d86518118 ("[SCSI] libsas: fix false positive 'device
attached' conditions"), reset the phy->entacted_sas_addr address to a
zero-address when the link rate is less than 1.5G.
Currently we find that when a new device is attached, and the link rate is
less than 1.5G, but the device type is not NO_DEVICE, for example: the link
rate is SAS_PHY_RESET_IN_PROGRESS and the device type is stp. After setting
the phy->entacted_sas_addr address to the zero address, the port will
continue to be created for the phy with the zero-address, and other phys
with the zero-address will be tried to be added to the new port:
[562240.051197] sas: ex 500e004aaaaaaa1f phy19:U:0 attached: 0000000000000000 (no device)
// phy19 is deleted but still on the parent port's phy_list
[562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached
[562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 0000000000000000 (stp)
[562240.062680] port-7:7:0: trying to add phy phy-7:7:19 fails: it's already part of another port
Therefore, it should be the same as sas_get_phy_attached_dev(). Only when
device_type is SAS_PHY_UNUSED, sas_address is set to the 0 address.
Fixes: 7d1d86518118 ("[SCSI] libsas: fix false positive 'device attached' conditions")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20240312141103.31358-5-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We found that when ex_phy was attached and added to the parent wide port,
ex_phy->port was not set, resulting in sas_unregister_devs_sas_addr() not
calling sas_port_delete_phy() when deleting the phy, and the deleted phy
was still on the parent wide port's phy_list.
When we use sas_port_add_ex_phy() to set ex_phy->port to solve the above
problem, we find that after all the phys of the parent_port are removed and
the number of phy becomes 0, the parent_port will not be set to NULL. This
causes the freed parent port to be used when attaching a new ex_phy in
sas_ex_add_parent_port().
Use sas_port_add_ex_phy() instead of sas_port_add_phy() to set ex_phy->port
when ex_phy is added to the parent port, and set ex_dev->parent_port to
NULL when the number of phy on the port becomes 0.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20240312141103.31358-4-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move sas_add_parent_port() to sas_expander.c and rename it to
sas_ex_add_parent_port() as it is only used in this file.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20240312141103.31358-3-yangxingui@huawei.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This moves the process of adding ex_phy to a port into a new helper.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20240312141103.31358-2-yangxingui@huawei.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The only user of blk_revalidate_disk_zones() second argument was the
SCSI disk driver (sd). Now that this driver does not require this
update_driver_data argument, remove it to simplify the interface of
blk_revalidate_disk_zones(). Also update the function kdoc comment to
be more accurate (i.e. there is no gendisk ->revalidate method).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-21-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The zone append emulation of the scsi disk driver was the only driver
using BLK_STS_ZONE_RESOURCE. With this code removed,
BLK_STS_ZONE_RESOURCE is now unused. Remove this macro definition and
simplify blk_mq_dispatch_rq_list() where this status code was handled.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-20-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Set the request queue of a TYPE_ZBC device as needing zone append
emulation by setting the device queue max_zone_append_sectors limit to
0. This enables the block layer generic implementation provided by zone
write plugging. With this, the sd driver will never see a
REQ_OP_ZONE_APPEND request and the zone append emulation code
implemented in sd_zbc.c can be removed.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-14-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Christoph Hellwig <hch@lst.de> says:
Hi all,
this series converts the SCSI midlayer and LLDDs to use atomic queue
limits API. It is pretty straight forward, except for the mpt3mr
driver which does really weird and probably already broken things by
setting limits from unlocked device iteration callbacks.
I will probably defer the (more complicated) ULD changes to the next
merge window as they would heavily conflict with Damien's zone write
plugging series. With that the series could go in through the SCSI
tree if Jens' ACKs the core block layer bits.
Link: https://lore.kernel.org/r/20240409143748.980206-1-hch@lst.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Switch to the ->device_configure method instead of ->slave_configure and
update the block limits on the passed in queue_limits instead of using the
per-limit accessors.
Note that mpi3mr also updates the limits from an event handler that
iterates all SCSI devices. This is also updated to use the queue_limits,
but the complete locking of this path probably means it already is
completely broken and needs a proper audit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-22-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Switch to the ->device_configure method instead of ->slave_configure and
update the block limits on the passed in queue_limits instead of using the
per-limit accessors.
Note that mpi3mr also updates the limits from an event handler that
iterates all SCSI devices. This is also updated to use the queue_limits,
but the complete locking of this path probably means it already is
completely broken and needs a proper audit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240410042759.GA2637@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Switch to the ->device_configure method instead of ->slave_configure and
update the block limits on the passed in queue_limits instead of using the
per-limit accessors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-21-hch@lst.de
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Switch to the ->device_configure method instead of ->slave_configure and
update the block limits on the passed in queue_limits instead of using the
per-limit accessors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-17-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Switch to the ->device_configure method instead of ->slave_configure and
update the block limits on the passed in queue_limits instead of using the
per-limit accessors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-16-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Switch to the ->device_configure method instead of ->slave_configure and
update the block limits on the passed in queue_limits instead of using the
per-limit accessors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-15-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Switch to the ->device_configure method instead of ->slave_configure and
update the block limits on the passed in queue_limits instead of using the
per-limit accessors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-13-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Switch to the ->device_configure method instead of ->slave_configure and
update the block limits on the passed in queue_limits instead of using the
per-limit accessors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-12-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This is a version of ->slave_configure that also takes a queue_limits
structure that the caller applies, and thus allows drivers to reconfigure
the queue using the atomic queue limits API.
In the long run it should also replace ->slave_configure entirely as there
is no need to have two different methods here, and the slave name in
addition to being politically charged also has no basis in the SCSI
standards or the kernel code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-11-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Switch scsi_add_lun() to use the atomic queue limits API to update the
max_hw_sectors for devices with quirks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-10-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Get drivers out of the business of having to call the block layer DMA
alignment limits helpers themselves.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-8-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
While we really should be killing the block layer bounce buffering ASAP, I
even more urgently need to stop the drivers to fiddle with the limits from
->slave_configure. Add a no_highmem flag to the Scsi_Host to centralize
this setting and switch the remaining four drivers that use block layer
bounce buffering to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-7-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
fc_function_template
ibmvfc only supports a single segment for BSG FC passthrough. Instead of
having it set a queue limits after creating the BSG queues, add a field so
that the FC transport can set it before allocating the queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-6-hch@lst.de
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Turn __scsi_init_queue() into scsi_init_limits() which initializes
queue_limits structure that can be passed to blk_mq_alloc_queue().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-5-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|