summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2018-08-26Merge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds2-32/+11
Pull IDA updates from Matthew Wilcox: "A better IDA API: id = ida_alloc(ida, GFP_xxx); ida_free(ida, id); rather than the cumbersome ida_simple_get(), ida_simple_remove(). The new IDA API is similar to ida_simple_get() but better named. The internal restructuring of the IDA code removes the bitmap preallocation nonsense. I hope the net -200 lines of code is convincing" * 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits) ida: Change ida_get_new_above to return the id ida: Remove old API test_ida: check_ida_destroy and check_ida_alloc test_ida: Convert check_ida_conv to new API test_ida: Move ida_check_max test_ida: Move ida_check_leaf idr-test: Convert ida_check_nomem to new API ida: Start new test_ida module target/iscsi: Allocate session IDs from an IDA iscsi target: fix session creation failure handling drm/vmwgfx: Convert to new IDA API dmaengine: Convert to new IDA API ppc: Convert vas ID allocation to new IDA API media: Convert entity ID allocation to new IDA API ppc: Convert mmu context allocation to new IDA API Convert net_namespace to new IDA API cb710: Convert to new IDA API rsxx: Convert to new IDA API osd: Convert to new IDA API sd: Convert to new IDA API ...
2018-08-22osd: Convert to new IDA APIMatthew Wilcox1-15/+7
Slightly simpler code. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-08-22sd: Convert to new IDA APIMatthew Wilcox1-17/+4
Allows us to remove an explicit spinlock. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-08-16Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds163-3704/+4590
Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: mpt3sas, lpfc, qla2xxx, hisi_sas, smartpqi, megaraid_sas, arcmsr. In addition, with the continuing absence of Nic we have target updates for tcmu and target core (all with reviews and acks). The biggest observable change is going to be that we're (again) trying to switch to mulitqueue as the default (a user can still override the setting on the kernel command line). Other major core stuff is the removal of the remaining Microchannel drivers, an update of the internal timers and some reworks of completion and result handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: core: use blk_mq_run_hw_queues in scsi_kick_queue scsi: ufs: remove unnecessary query(DM) UPIU trace scsi: qla2xxx: Fix issue reported by static checker for qla2x00_els_dcmd2_sp_done() scsi: aacraid: Spelling fix in comment scsi: mpt3sas: Fix calltrace observed while running IO & reset scsi: aic94xx: fix an error code in aic94xx_init() scsi: st: remove redundant pointer STbuffer scsi: qla2xxx: Update driver version to 10.00.00.08-k scsi: qla2xxx: Migrate NVME N2N handling into state machine scsi: qla2xxx: Save frame payload size from ICB scsi: qla2xxx: Fix stalled relogin scsi: qla2xxx: Fix race between switch cmd completion and timeout scsi: qla2xxx: Fix Management Server NPort handle reservation logic scsi: qla2xxx: Flush mailbox commands on chip reset scsi: qla2xxx: Fix unintended Logout scsi: qla2xxx: Fix session state stuck in Get Port DB scsi: qla2xxx: Fix redundant fc_rport registration scsi: qla2xxx: Silent erroneous message scsi: qla2xxx: Prevent sysfs access when chip is down scsi: qla2xxx: Add longer window for chip reset ...
2018-08-14Merge SCSI_IOCTL_SEND_COMMAND cleanup branch.Linus Torvalds1-9/+0
Nobody commented on this patch back in July. So now it gets merged. * SCSI_IOCTL_SEND_COMMAND cleanup: scsi sg: remove incorrect scsi command checking logic
2018-08-14Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-blockLinus Torvalds10-158/+27
Pull block updates from Jens Axboe: "First pull request for this merge window, there will also be a followup request with some stragglers. This pull request contains: - Fix for a thundering heard issue in the wbt block code (Anchal Agarwal) - A few NVMe pull requests: * Improved tracepoints (Keith) * Larger inline data support for RDMA (Steve Wise) * RDMA setup/teardown fixes (Sagi) * Effects log suppor for NVMe target (Chaitanya Kulkarni) * Buffered IO suppor for NVMe target (Chaitanya Kulkarni) * TP4004 (ANA) support (Christoph) * Various NVMe fixes - Block io-latency controller support. Much needed support for properly containing block devices. (Josef) - Series improving how we handle sense information on the stack (Kees) - Lightnvm fixes and updates/improvements (Mathias/Javier et al) - Zoned device support for null_blk (Matias) - AIX partition fixes (Mauricio Faria de Oliveira) - DIF checksum code made generic (Max Gurtovoy) - Add support for discard in iostats (Michael Callahan / Tejun) - Set of updates for BFQ (Paolo) - Removal of async write support for bsg (Christoph) - Bio page dirtying and clone fixups (Christoph) - Set of bcache fix/changes (via Coly) - Series improving blk-mq queue setup/teardown speed (Ming) - Series improving merging performance on blk-mq (Ming) - Lots of other fixes and cleanups from a slew of folks" * tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits) blkcg: Make blkg_root_lookup() work for queues in bypass mode bcache: fix error setting writeback_rate through sysfs interface null_blk: add lock drop/acquire annotation Blk-throttle: reduce tail io latency when iops limit is enforced block: paride: pd: mark expected switch fall-throughs block: Ensure that a request queue is dissociated from the cgroup controller block: Introduce blk_exit_queue() blkcg: Introduce blkg_root_lookup() block: Remove two superfluous #include directives blk-mq: count the hctx as active before allocating tag block: bvec_nr_vecs() returns value for wrong slab bcache: trivial - remove tailing backslash in macro BTREE_FLAG bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section bcache: set max writeback rate when I/O request is idle bcache: add code comments for bset.c bcache: fix mistaken comments in request.c bcache: fix mistaken code comments in bcache.h bcache: add a comment in super.c bcache: avoid unncessary cache prefetch bch_btree_node_get() bcache: display rate debug parameters to 0 when writeback is not running ...
2018-08-14Merge branch 'work.open3' of ↵Linus Torvalds1-20/+4
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs open-related updates from Al Viro: - "do we need fput() or put_filp()" rules are gone - it's always fput() now. We keep track of that state where it belongs - in ->f_mode. - int *opened mess killed - in finish_open(), in ->atomic_open() instances and in fs/namei.c code around do_last()/lookup_open()/atomic_open(). - alloc_file() wrappers with saner calling conventions are introduced (alloc_file_clone() and alloc_file_pseudo()); callers converted, with much simplification. - while we are at it, saner calling conventions for path_init() and link_path_walk(), simplifying things inside fs/namei.c (both on open-related paths and elsewhere). * 'work.open3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits) few more cleanups of link_path_walk() callers allow link_path_walk() to take ERR_PTR() make path_init() unconditionally paired with terminate_walk() document alloc_file() changes make alloc_file() static do_shmat(): grab shp->shm_file earlier, switch to alloc_file_clone() new helper: alloc_file_clone() create_pipe_files(): switch the first allocation to alloc_file_pseudo() anon_inode_getfile(): switch to alloc_file_pseudo() hugetlb_file_setup(): switch to alloc_file_pseudo() ocxlflash_getfile(): switch to alloc_file_pseudo() cxl_getfile(): switch to alloc_file_pseudo() ... and switch shmem_file_setup() to alloc_file_pseudo() __shmem_file_setup(): reorder allocations new wrapper: alloc_file_pseudo() kill FILE_{CREATED,OPENED} switch atomic_open() and lookup_open() to returning 0 in all success cases document ->atomic_open() changes ->atomic_open(): return 0 in all success cases get rid of 'opened' in path_openat() and the helpers downstream ...
2018-08-12Merge tag 'scsi-fixes' of ↵Linus Torvalds7-49/+69
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Eight fixes. The most important one is the mpt3sas fix which makes the driver work again on big endian systems. The rest are mostly minor error path or checker issues and the vmw_scsi one fixes a performance problem" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: vmw_pvscsi: Return DID_RESET for status SAM_STAT_COMMAND_TERMINATED scsi: sr: Avoid that opening a CD-ROM hangs with runtime power management enabled scsi: mpt3sas: Swap I/O memory read value back to cpu endianness scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO scsi: fcoe: drop frames in ELS LOGO error path scsi: fcoe: fix use-after-free in fcoe_ctlr_els_send scsi: qedi: Fix a potential buffer overflow scsi: qla2xxx: Fix memory leak for allocating abort IOCB
2018-08-09scsi: core: use blk_mq_run_hw_queues in scsi_kick_queueJianchao Wang1-1/+1
We don't use blk-mq start/stop hw queue any more, so no reason to use blk_mq_start_hw_queues which does clear_bit, replace it with blk_mq_run_hw_queues. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-09scsi: ufs: remove unnecessary query(DM) UPIU traceOhad Sharabi1-7/+8
This patch removes redundant trace that occurs when sending Device Management(DM) request (fix behavior in commit 6667e6d91c88 ("scsi: ufs: add trace event for ufs upiu"). Since the function send_command is called also for DM request, UPIU trace for DM request is called twice- one identified as query_* the other as send/complete. Signed-off-by: Ohad Sharabi <ohad.sharabi@wdc.com> Fixes: 6667e6d91c88 ("scsi: ufs: add trace event for ufs upiu") Reviewed-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-09scsi: qla2xxx: Fix issue reported by static checker for ↵Quinn Tran1-0/+1
qla2x00_els_dcmd2_sp_done() This patch fixes following Smatch complaint: drivers/scsi/qla2xxx/qla_iocb.c:2647 qla2x00_els_dcmd2_sp_done() error: we previously assumed 'e' could be null (see line 2631) Fixes: 8777e4314d39 ("scsi: qla2xxx: Migrate NVME N2N handling into state machine") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-09scsi: aacraid: Spelling fix in commentDongliang Mu2-2/+2
requesed -> requested Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-09scsi: mpt3sas: Fix calltrace observed while running IO & resetSreekanth Reddy2-1/+2
Below kernel BUG was observed while running IOs with host reset (issued from application), mpt3sas_cm0: diag reset: SUCCESS ------------[ cut here ]------------ WARNING: CPU: 12 PID: 4336 at drivers/scsi/mpt3sas/mpt3sas_base.c:3282 mpt3sas_base_clear_st+0x3d/0x40 [mpt3sas] Modules linked in: macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun devlink ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat sb_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support dcdbas pcspkr joydev ipmi_ssif ses enclosure sg ipmi_devintf acpi_pad ipmi_msghandler acpi_power_meter mei_me lpc_ich wmi mei shpchp ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi uas usb_storage mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix mpt3sas libata crct10dif_pclmul crct10dif_common tg3 crc32c_intel i2c_core raid_class ptp scsi_transport_sas pps_core dm_mirror dm_region_hash dm_log dm_mod CPU: 12 PID: 4336 Comm: python Kdump: loaded Tainted: G W ------------ 3.10.0-875.el7.brdc.x86_64 #1 Hardware name: Dell Inc. PowerEdge R820/0YWR73, BIOS 1.5.0 03/08/2013 Call Trace: [<ffffffff9cf16583>] dump_stack+0x19/0x1b [<ffffffff9c891698>] __warn+0xd8/0x100 [<ffffffff9c8917dd>] warn_slowpath_null+0x1d/0x20 [<ffffffffc04f3f4d>] mpt3sas_base_clear_st+0x3d/0x40 [mpt3sas] [<ffffffffc05047d2>] _scsih_flush_running_cmds+0x92/0xe0 [mpt3sas] [<ffffffffc05095db>] mpt3sas_scsih_reset_handler+0x43b/0xaf0 [mpt3sas] [<ffffffff9c894829>] ? vprintk_default+0x29/0x40 [<ffffffff9cf10531>] ? printk+0x60/0x77 [<ffffffffc04f06c8>] ? _base_diag_reset+0x238/0x340 [mpt3sas] [<ffffffffc04f794d>] mpt3sas_base_hard_reset_handler+0x1ad/0x420 [mpt3sas] [<ffffffffc05132b9>] _ctl_ioctl_main.isra.12+0x11b9/0x1200 [mpt3sas] [<ffffffffc068d585>] ? xfs_file_aio_write+0x155/0x1b0 [xfs] [<ffffffff9ca1a4e3>] ? do_sync_write+0x93/0xe0 [<ffffffffc051337a>] _ctl_ioctl+0x1a/0x20 [mpt3sas] [<ffffffff9ca2fe90>] do_vfs_ioctl+0x350/0x560 [<ffffffff9ca1dec1>] ? __sb_end_write+0x31/0x60 [<ffffffff9ca30141>] SyS_ioctl+0xa1/0xc0 [<ffffffff9cf28715>] ? system_call_after_swapgs+0xa2/0x146 [<ffffffff9cf287d5>] system_call_fastpath+0x1c/0x21 [<ffffffff9cf28721>] ? system_call_after_swapgs+0xae/0x146 ---[ end trace 5dac5b98d89aaa3c ]--- ------------[ cut here ]------------ kernel BUG at block/blk-core.c:1476! invalid opcode: 0000 [#1] SMP Modules linked in: macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun devlink ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat sb_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support dcdbas pcspkr joydev ipmi_ssif ses enclosure sg ipmi_devintf acpi_pad ipmi_msghandler acpi_power_meter mei_me lpc_ich wmi mei shpchp ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi uas usb_storage mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix mpt3sas libata crct10dif_pclmul crct10dif_common tg3 crc32c_intel i2c_core raid_class ptp scsi_transport_sas pps_core dm_mirror dm_region_hash dm_log dm_mod CPU: 12 PID: 4336 Comm: python Kdump: loaded Tainted: G W ------------ 3.10.0-875.el7.brdc.x86_64 #1 Hardware name: Dell Inc. PowerEdge R820/0YWR73, BIOS 1.5.0 03/08/2013 task: ffff903fc96e0fd0 ti: ffff903fb1eec000 task.ti: ffff903fb1eec000 RIP: 0010:[<ffffffff9cb19ec0>] [<ffffffff9cb19ec0>] blk_requeue_request+0x90/0xa0 RSP: 0018:ffff903c6b783dc0 EFLAGS: 00010087 RAX: ffff903bb67026d0 RBX: ffff903b7d6a6140 RCX: dead000000000200 RDX: ffff903bb67026d0 RSI: ffff903bb6702580 RDI: ffff903bb67026d0 RBP: ffff903c6b783dd8 R08: ffff903bb67026d0 R09: ffffd97e80000000 R10: ffff903c658bac00 R11: 0000000000000000 R12: ffff903bb6702580 R13: ffff903fa9a292f0 R14: 0000000000000246 R15: 0000000000001057 FS: 00007f7026f5b740(0000) GS:ffff903c6b780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f298877c004 CR3: 00000000caf36000 CR4: 00000000000607e0 Call Trace: <IRQ> [<ffffffff9cca68ff>] __scsi_queue_insert+0xbf/0x110 [<ffffffff9cca79ca>] scsi_io_completion+0x5da/0x6a0 [<ffffffff9cc9ca3c>] scsi_finish_command+0xdc/0x140 [<ffffffff9cca6aa2>] scsi_softirq_done+0x132/0x160 [<ffffffff9cb240c6>] blk_done_softirq+0x96/0xc0 [<ffffffff9c89a905>] __do_softirq+0xf5/0x280 [<ffffffff9cf2bd2c>] call_softirq+0x1c/0x30 [<ffffffff9c82d625>] do_softirq+0x65/0xa0 [<ffffffff9c89ac85>] irq_exit+0x105/0x110 [<ffffffff9cf2d0a8>] smp_apic_timer_interrupt+0x48/0x60 [<ffffffff9cf297f2>] apic_timer_interrupt+0x162/0x170 <EOI> [<ffffffff9cca5f41>] ? scsi_done+0x21/0x60 [<ffffffff9cb5ac18>] ? delay_tsc+0x38/0x60 [<ffffffff9cb5ab5d>] __const_udelay+0x2d/0x30 [<ffffffffc04effde>] _base_handshake_req_reply_wait+0x8e/0x4a0 [mpt3sas] [<ffffffffc04f0b13>] _base_get_ioc_facts+0x123/0x590 [mpt3sas] [<ffffffffc04f06c8>] ? _base_diag_reset+0x238/0x340 [mpt3sas] [<ffffffffc04f7993>] mpt3sas_base_hard_reset_handler+0x1f3/0x420 [mpt3sas] [<ffffffffc05132b9>] _ctl_ioctl_main.isra.12+0x11b9/0x1200 [mpt3sas] [<ffffffffc068d585>] ? xfs_file_aio_write+0x155/0x1b0 [xfs] [<ffffffff9ca1a4e3>] ? do_sync_write+0x93/0xe0 [<ffffffffc051337a>] _ctl_ioctl+0x1a/0x20 [mpt3sas] [<ffffffff9ca2fe90>] do_vfs_ioctl+0x350/0x560 [<ffffffff9ca1dec1>] ? __sb_end_write+0x31/0x60 [<ffffffff9ca30141>] SyS_ioctl+0xa1/0xc0 [<ffffffff9cf28715>] ? system_call_after_swapgs+0xa2/0x146 [<ffffffff9cf287d5>] system_call_fastpath+0x1c/0x21 [<ffffffff9cf28721>] ? system_call_after_swapgs+0xae/0x146 Code: 83 c3 10 4c 89 e2 4c 89 ee e8 8d 21 04 00 48 8b 03 48 85 c0 75 e5 41 f6 44 24 4a 10 74 ad 4c 89 e6 4c 89 ef e8 b2 42 00 00 eb a0 <0f> 0b 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 RIP [<ffffffff9cb19ec0>] blk_requeue_request+0x90/0xa0 RSP <ffff903c6b783dc0> As a part of host reset operation, driver will flushout all IOs outstanding at driver level with "DID_RESET" result. To find which are all commands outstanding at the driver level, driver loops with smid starting from one to HBA queue depth and calls mpt3sas_scsih_scsi_lookup_get() to get scmd as shown below for (smid = 1; smid <= ioc->scsiio_depth; smid++) { scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid); if (!scmd) continue; But in mpt3sas_scsih_scsi_lookup_get() function, driver returns some scsi cmnds which are not outstanding at the driver level (possibly request is constructed at block layer since QUEUE_FLAG_QUIESCED is not set. Even if driver uses scsi_block_requests and scsi_unblock_requests, issue still persists as they will be just blocking further IO from scsi layer and not from block layer) and these commands are flushed with DID_RESET host bytes thus resulting into above kernel BUG. This issue got introduced by commit dbec4c9040ed ("scsi: mpt3sas: lockless command submission"). To fix this issue, we have modified the mpt3sas_scsih_scsi_lookup_get() to check for smid equals to zero (note: whenever any scsi cmnd is processing at the driver level then smid for that scsi cmnd will be non-zero, always it starts from one) before it returns the scmd pointer to the caller. If smid is zero then this function returns scmd pointer as NULL and driver won't flushout those scsi cmnds at driver level with DID_RESET host byte thus this issue will not be observed. [mkp: amended with updated fix from Sreekanth] Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Fixes: dbec4c9040ed ("scsi: mpt3sas: lockless command submission") Cc: stable@vger.kernel.org # v4.16+ Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-09scsi: aic94xx: fix an error code in aic94xx_init()Dan Carpenter1-1/+3
We accidentally return success instead of -ENOMEM on this error path. Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-09scsi: st: remove redundant pointer STbufferColin Ian King1-3/+0
Pointer STbuffer is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'STbuffer' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-06Merge tag 'v4.18-rc6' into for-4.19/block2Jens Axboe11-33/+90
Pull in 4.18-rc6 to get the NVMe core AEN change to avoid a merge conflict down the line. Signed-of-by: Jens Axboe <axboe@kernel.dk>
2018-08-03scsi: vmw_pvscsi: Return DID_RESET for status SAM_STAT_COMMAND_TERMINATEDJim Gill1-3/+8
Commands that are reset are returned with status SAM_STAT_COMMAND_TERMINATED. PVSCSI currently returns DID_OK | SAM_STAT_COMMAND_TERMINATED which fails the command. Instead, set hostbyte to DID_RESET to allow upper layers to retry. Tested by copying a large file between two pvscsi disks on same adapter while performing a bus reset at 1-second intervals. Before fix, commands sometimes fail with DID_OK. After fix, commands observed to fail with DID_RESET. Signed-off-by: Jim Gill <jgill@vmware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-03scsi: sr: Avoid that opening a CD-ROM hangs with runtime power management ↵Bart Van Assche1-8/+21
enabled Surround scsi_execute() calls with scsi_autopm_get_device() and scsi_autopm_put_device(). Note: removing sr_mutex protection from the scsi_cd_get() and scsi_cd_put() calls is safe because the purpose of sr_mutex is to serialize cdrom_*() calls. This patch avoids that complaints similar to the following appear in the kernel log if runtime power management is enabled: INFO: task systemd-udevd:650 blocked for more than 120 seconds. Not tainted 4.18.0-rc7-dbg+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. systemd-udevd D28176 650 513 0x00000104 Call Trace: __schedule+0x444/0xfe0 schedule+0x4e/0xe0 schedule_preempt_disabled+0x18/0x30 __mutex_lock+0x41c/0xc70 mutex_lock_nested+0x1b/0x20 __blkdev_get+0x106/0x970 blkdev_get+0x22c/0x5a0 blkdev_open+0xe9/0x100 do_dentry_open.isra.19+0x33e/0x570 vfs_open+0x7c/0xd0 path_openat+0x6e3/0x1120 do_filp_open+0x11c/0x1c0 do_sys_open+0x208/0x2d0 __x64_sys_openat+0x59/0x70 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Maurizio Lombardi <mlombard@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <stable@vger.kernel.org> Tested-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-03scsi: mpt3sas: Swap I/O memory read value back to cpu endiannessSreekanth Reddy1-8/+8
Swap the I/O memory read value back to cpu endianness before storing it in a data structures which are defined in the MPI headers where u8 components are not defined in the endianness order. In this area from day one mpt3sas driver is using le32_to_cpu() & cpu_to_le32() APIs. But in commit cf6bf9710c (mpt3sas: Bug fix for big endian systems) we have removed these APIs before reading I/O memory which we should haven't done it. So in this patch I am correcting it by adding these APIs back before accessing I/O memory. Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-03scsi: Check sense buffer size at build timeKees Cook1-3/+3
To avoid introducing problems like those fixed in commit f7068114d45e ("sr: pass down correctly sized SCSI sense buffer"), this creates a macro wrapper for scsi_execute() that verifies the size of the sense buffer similar to what was done for command string sizes in commit 3756f6401c30 ("exec: avoid gcc-8 warning for get_task_comm"). Another solution could be to add a length argument to scsi_execute(), but this function already takes a lot of arguments and Jens was not fond of that approach. Additionally, this moves the SCSI_SENSE_BUFFERSIZE definition into scsi_device.h, and removes a redundant include for scsi_device.h from scsi_cmnd.h. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-03block: Switch struct packet_command to use struct scsi_sense_hdrKees Cook1-13/+9
There is a lot of needless struct request_sense usage in the CDROM code. These can all be struct scsi_sense_hdr instead, to avoid any confusion over their respective structure sizes. This patch is a lot of noise changing "sense" to "sshdr", but the final code is more readable to distinguish between "sense" meaning "struct request_sense" and "sshdr" meaning "struct scsi_sense_hdr". Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-03scsi: build scsi_common.o for all scsi passthrough request usersChristoph Hellwig1-1/+1
Split scsi_common.o out of SCSI so that non-SCSI users can pull it in easily for future sense buffer helper usage. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-03scsi: cxlflash: Drop unused sense buffersKees Cook2-11/+4
This removes the unused sense buffer in read_cap16() and write_same16(). Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-02scsi: qla2xxx: Update driver version to 10.00.00.08-kHimanshu Madhani1-1/+1
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Migrate NVME N2N handling into state machineQuinn Tran12-126/+413
This patch fixes regression introduced for the N2N support for FC-NVMe. For FC-NVMe with N2N connection, instead of FW initiating the Login, Driver starts Login process. This patch migrates that new process from a standalone path into existing session management state machine. With this state change now driver will not wait for pull NPort ID from FW. Fixes: edd05de197592 ("scsi: qla2xxx: Changes to support N2N logins") Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Save frame payload size from ICBQuinn Tran3-7/+5
Save frame payload size from init control block. This field/data is used to register with switch database. This allows the init control block temp buf to be reused. [mkp: remove unused variable] Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Fix stalled reloginHimanshu Madhani2-1/+2
This patch sets and clears FCF_ASYNC_{SENT|ACTIVE} flags to prevent stalling of relogin attempt. Once flag are correctly set/cleared, relogin timer can retry relogin attempt for driver to continue login. Fixes: fa83e65885b9 ("scsi: qla2xxx: ensure async flags are reset correctly") Cc: stable@vger.kernel.org #4.17 Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Fix race between switch cmd completion and timeoutQuinn Tran3-20/+58
Fix race condition between switch cmd completion and timeout timer. Timer has popped triggers command free. On IOCB completion, stale sp point was reused. Instead, an abort will be sent to FW to nudge the command out of FW where the normal completion will take place. RIP: 0010:qla2x00_chk_ms_status+0xf3/0x1b0 [qla2xxx] Call Trace: <IRQ> qla24xx_els_ct_entry.isra.15+0x1d4/0x2b0 [qla2xxx] qla24xx_msix_rsp_q+0x39/0xf0 [qla2xxx] qla24xx_process_response_queue+0xbc/0x2b0 [qla2xxx] qla24xx_msix_rsp_q+0x8a/0xf0 [qla2xxx] __handle_irq_event_percpu+0xa0/0x1f0 Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Fix Management Server NPort handle reservation logicQuinn Tran4-2/+32
After selecting the NPort handle/loop_id, set a bit in the loop_id_map to prevent others from selecting the same NPort handle. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Flush mailbox commands on chip resetQuinn Tran4-5/+74
Flush pending mailbox commands on chip reset. Wake up command that's waiting for an interrupt and wait for mailbox counters to go to zero. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Fix unintended LogoutQuinn Tran1-1/+2
During normal IO, FW can return IO with 'port unavailble' status. Driver would send a LOGO to remote port for session resync. On an off chance, a PLOGI could arrive before sending the LOGO. This patch will skip sendiing LOGO if a PLOGI just came in. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Fix session state stuck in Get Port DBQuinn Tran1-3/+6
This patch sets discovery state back to GNL (Get Name List) when session is stuck at GPDB (Get Port DataBase). This will allow state machine to retry login and move session state ahead in discovery. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Fix redundant fc_rport registrationQuinn Tran1-14/+11
Prevent multiple registrations with transport layer for the same remote port. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Silent erroneous messageQuinn Tran1-0/+9
Driver uses shadow pointer instead of Mirror pointer for firmware dump collection. Skip those entries for Mirror pointers for Request/Response queue from firmware dump template reading. Following messages are printed in log messages: qla27xx_fwdt_entry_t268: unknown buffer 4 qla27xx_fwdt_entry_t268: unknown buffer 5 This patch fixes these error messages by adding skip_entry() to not read them from template. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Prevent sysfs access when chip is downQuinn Tran3-7/+34
Prevent user from sending commands through sysfs while firmware is not running or reset is in progress. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Add longer window for chip resetQuinn Tran2-1/+6
qla2x00_reset_active only covers the window of turning the chip off. Add check to cover turning chip on. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Fix login retry countQuinn Tran5-63/+70
Login retry count was not properly decrementing which lead to endless retry. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Fix N2N link re-connectQuinn Tran7-108/+181
In case of N2N connect, sg_reset for bus/device/host was causing driver and firmware state to go out of sync. This patch fixes this link instablity when reconnect is attempted after link flap. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: qla2xxx: Cleanup for N2N codeHimanshu Madhani2-137/+0
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: sym53c8xx: remove some redundant variablesColin Ian King2-6/+1
Variables scriptb0 and dp_sgmin are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'scriptb0' set but not used [-Wunused-but-set-variable] warning: variable 'dp_sgmin' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: csiostor: update csio_get_flash_params()Arjun Vynipadath1-13/+102
- Updates csio_get_flash_params() to take care of ISSI, Macronix and Winbond FLASH parts. - Assume flash part size to be 4MB if it cannot be identified Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: core: Avoid that SCSI device removal through sysfs triggers a deadlockBart Van Assche1-2/+18
A long time ago the unfortunate decision was taken to add a self-deletion attribute to the sysfs SCSI device directory. That decision was unfortunate because self-deletion is really tricky. We can't drop that attribute because widely used user space software depends on it, namely the rescan-scsi-bus.sh script. Hence this patch that avoids that writing into that attribute triggers a deadlock. See also commit 7973cbd9fbd9 ("[PATCH] add sysfs attributes to scan and delete scsi_devices"). This patch avoids that self-removal triggers the following deadlock: ====================================================== WARNING: possible circular locking dependency detected 4.18.0-rc2-dbg+ #5 Not tainted ------------------------------------------------------ modprobe/6539 is trying to acquire lock: 000000008323c4cd (kn->count#202){++++}, at: kernfs_remove_by_name_ns+0x45/0x90 but task is already holding lock: 00000000a6ec2c69 (&shost->scan_mutex){+.+.}, at: scsi_remove_host+0x21/0x150 [scsi_mod] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&shost->scan_mutex){+.+.}: __mutex_lock+0xfe/0xc70 mutex_lock_nested+0x1b/0x20 scsi_remove_device+0x26/0x40 [scsi_mod] sdev_store_delete+0x27/0x30 [scsi_mod] dev_attr_store+0x3e/0x50 sysfs_kf_write+0x87/0xa0 kernfs_fop_write+0x190/0x230 __vfs_write+0xd2/0x3b0 vfs_write+0x101/0x270 ksys_write+0xab/0x120 __x64_sys_write+0x43/0x50 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (kn->count#202){++++}: lock_acquire+0xd2/0x260 __kernfs_remove+0x424/0x4a0 kernfs_remove_by_name_ns+0x45/0x90 remove_files.isra.1+0x3a/0x90 sysfs_remove_group+0x5c/0xc0 sysfs_remove_groups+0x39/0x60 device_remove_attrs+0x82/0xb0 device_del+0x251/0x580 __scsi_remove_device+0x19f/0x1d0 [scsi_mod] scsi_forget_host+0x37/0xb0 [scsi_mod] scsi_remove_host+0x9b/0x150 [scsi_mod] sdebug_driver_remove+0x4b/0x150 [scsi_debug] device_release_driver_internal+0x241/0x360 device_release_driver+0x12/0x20 bus_remove_device+0x1bc/0x290 device_del+0x259/0x580 device_unregister+0x1a/0x70 sdebug_remove_adapter+0x8b/0xf0 [scsi_debug] scsi_debug_exit+0x76/0xe8 [scsi_debug] __x64_sys_delete_module+0x1c1/0x280 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&shost->scan_mutex); lock(kn->count#202); lock(&shost->scan_mutex); lock(kn->count#202); *** DEADLOCK *** 2 locks held by modprobe/6539: #0: 00000000efaf9298 (&dev->mutex){....}, at: device_release_driver_internal+0x68/0x360 #1: 00000000a6ec2c69 (&shost->scan_mutex){+.+.}, at: scsi_remove_host+0x21/0x150 [scsi_mod] stack backtrace: CPU: 10 PID: 6539 Comm: modprobe Not tainted 4.18.0-rc2-dbg+ #5 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_circular_bug.isra.34+0x213/0x221 __lock_acquire+0x1a7e/0x1b50 lock_acquire+0xd2/0x260 __kernfs_remove+0x424/0x4a0 kernfs_remove_by_name_ns+0x45/0x90 remove_files.isra.1+0x3a/0x90 sysfs_remove_group+0x5c/0xc0 sysfs_remove_groups+0x39/0x60 device_remove_attrs+0x82/0xb0 device_del+0x251/0x580 __scsi_remove_device+0x19f/0x1d0 [scsi_mod] scsi_forget_host+0x37/0xb0 [scsi_mod] scsi_remove_host+0x9b/0x150 [scsi_mod] sdebug_driver_remove+0x4b/0x150 [scsi_debug] device_release_driver_internal+0x241/0x360 device_release_driver+0x12/0x20 bus_remove_device+0x1bc/0x290 device_del+0x259/0x580 device_unregister+0x1a/0x70 sdebug_remove_adapter+0x8b/0xf0 [scsi_debug] scsi_debug_exit+0x76/0xe8 [scsi_debug] __x64_sys_delete_module+0x1c1/0x280 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe See also https://www.mail-archive.com/linux-scsi@vger.kernel.org/msg54525.html. Fixes: ac0ece9174ac ("scsi: use device_remove_file_self() instead of device_schedule_callback()") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: lpfc: update driver version to 12.0.0.6James Smart1-1/+1
Update the driver version to 12.0.0.6 Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: lpfc: Remove lpfc_enable_pbde as module parameterJames Smart1-10/+2
Enablement of the PBDE optimization brought out some incompatible behaviors under error scenarios. Best to disable and remove the PBDE optimization. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: lpfc: Correct LCB ACCept payloadJames Smart1-0/+2
After memory allocation for the LCB response frame, the memory wasn't zero initialized, and not all fields are set. Thus garbage shows up in the payload. Fix by zeroing the memory at allocation. Also properly set the Capability field based on duration support. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: lpfc: Limit tracking of tgt queue depth in fast pathJames Smart6-53/+74
Performance is affected when target queue depth is tracked. An atomic counter is incremented on the submission path which competes with it being decremented on the completion path. In addition, multiple CPUs can simultaniously be manipulating this counter for the same ndlp. Reduce the overhead by only performing the target increment/decrement when the target queue depth is less than the overall adapter depth, thus is actually meaningful. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: lpfc: Fix driver crash when re-registering NVME rports.James Smart1-8/+14
During remote port loss fault testing, the driver crashed with the following trace: general protection fault: 0000 [#1] SMP RIP: ... lpfc_nvme_register_port+0x250/0x480 [lpfc] Call Trace: lpfc_nlp_state_cleanup+0x1b3/0x7a0 [lpfc] lpfc_nlp_set_state+0xa6/0x1d0 [lpfc] lpfc_cmpl_prli_prli_issue+0x213/0x440 lpfc_disc_state_machine+0x7e/0x1e0 [lpfc] lpfc_cmpl_els_prli+0x18a/0x200 [lpfc] lpfc_sli_sp_handle_rspiocb+0x3b5/0x6f0 [lpfc] lpfc_sli_handle_slow_ring_event_s4+0x161/0x240 [lpfc] lpfc_work_done+0x948/0x14c0 [lpfc] lpfc_do_work+0x16f/0x180 [lpfc] kthread+0xc9/0xe0 ret_from_fork+0x55/0x80 After registering a new remoteport, the driver is pulling an ndlp pointer from the lpfc rport associated with the private area of a newly registered remoteport. The private area is uninitialized, so it's garbage. Correct by pulling the the lpfc rport pointer from the entering ndlp point, then ndlp value from at rport. Note the entering ndlp may be replacing by the rport->ndlp due to an address change swap. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: lpfc: Fix list corruption on the completion queue.James Smart1-8/+36
Enabling list_debug showed the drivers txcmplq was suffering list corruption. The systems will eventually crash because the iocb free list gets crossed linked with the prings txcmplq. Most systems will run for a while after the corruption, but will eventually crash when a scsi eh reset occurs and the txcmplq is attempted to be flushed. The flush gets stuck in an endless loop. The problem is the abort handler does not hold the sli4 ring lock while validating the IO so the IO could complete while the driver is still preping the abort. The erroneously generated abort, when it completes, has pointers to the original IO that has already completed, and the IO manipulation (for the second time) corrupts the list. Correct by taking the ring lock early in the abort handler so the erroneous abort won't be sent if the io has/is completing. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-08-02scsi: lpfc: Fix sysfs Speed value on CNA portsJames Smart1-0/+18
CNA ports were showing speed as "unknown" even if the link is up. Add speed decoding for FCOE-based adapters. Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>