summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)AuthorFilesLines
2018-04-16Merge tag 'scsi-fixes' of ↵Linus Torvalds18-82/+109
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of minor (and safe changes) that didn't make the initial pull request plus some bug fixes. The status handling code is actually a running regression from the previous merge window which had an incomplete fix (now reverted) and most of the remaining bug fixes are for problems older than the current merge window" [ Side note: this merge also takes the base kernel git repository to 6+ million objects for the first time. Technically we hit it a couple of merges ago already if you count all the tag objects, but now it reaches 6M+ objects reachable from HEAD. I was joking around that that's when I should switch to 5.0, because 3.0 happened at the 2M mark, and 4.0 happened at 4M objects. But probably not, even if numerology is about as good a reason as any. - Linus ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: devinfo: Add Microsoft iSCSI target to 1024 sector blacklist scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler() scsi: dpt_i2o: Use after free in I2ORESETCMD ioctl scsi: core: Make scsi_result_to_blk_status() recognize CONDITION MET scsi: core: Rename __scsi_error_from_host_byte() into scsi_result_to_blk_status() Revert "scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()" scsi: aacraid: Insure command thread is not recursively stopped scsi: qla2xxx: Correct setting of SAM_STAT_CHECK_CONDITION scsi: qla2xxx: correctly shift host byte scsi: qla2xxx: Fix race condition between iocb timeout and initialisation scsi: qla2xxx: Avoid double completion of abort command scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failure scsi: scsi_dh: Don't look for NULL devices handlers by name scsi: core: remove redundant assignment to shost->use_blk_mq
2018-04-11sr: get/drop reference to device in revalidate and check_eventsJens Axboe1-4/+15
We can't just use scsi_cd() to get the scsi_cd structure, we have to grab a live reference to the device. For both callbacks, we're not inside an open where we already hold a reference to the device. This fixes device removal/addition under concurrent device access, which otherwise could result in the below oops. NULL pointer dereference at 0000000000000010 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: sr 12:0:0:0: [sr2] scsi-1 drive scsi_debug crc_t10dif crct10dif_generic crct10dif_common nvme nvme_core sb_edac xl sr 12:0:0:0: Attached scsi CD-ROM sr2 sr_mod cdrom btrfs xor zstd_decompress zstd_compress xxhash lzo_compress zlib_defc sr 12:0:0:0: Attached scsi generic sg7 type 5 igb ahci libahci i2c_algo_bit libata dca [last unloaded: crc_t10dif] CPU: 43 PID: 4629 Comm: systemd-udevd Not tainted 4.16.0+ #650 Hardware name: Dell Inc. PowerEdge T630/0NT78X, BIOS 2.3.4 11/09/2016 RIP: 0010:sr_block_revalidate_disk+0x23/0x190 [sr_mod] RSP: 0018:ffff883ff357bb58 EFLAGS: 00010292 RAX: ffffffffa00b07d0 RBX: ffff883ff3058000 RCX: ffff883ff357bb66 RDX: 0000000000000003 RSI: 0000000000007530 RDI: ffff881fea631000 RBP: 0000000000000000 R08: ffff881fe4d38400 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000000001b6 R12: 000000000800005d R13: 000000000800005d R14: ffff883ffd9b3790 R15: 0000000000000000 FS: 00007f7dc8e6d8c0(0000) GS:ffff883fff340000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 0000003ffda98005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? __invalidate_device+0x48/0x60 check_disk_change+0x4c/0x60 sr_block_open+0x16/0xd0 [sr_mod] __blkdev_get+0xb9/0x450 ? iget5_locked+0x1c0/0x1e0 blkdev_get+0x11e/0x320 ? bdget+0x11d/0x150 ? _raw_spin_unlock+0xa/0x20 ? bd_acquire+0xc0/0xc0 do_dentry_open+0x1b0/0x320 ? inode_permission+0x24/0xc0 path_openat+0x4e6/0x1420 ? cpumask_any_but+0x1f/0x40 ? flush_tlb_mm_range+0xa0/0x120 do_filp_open+0x8c/0xf0 ? __seccomp_filter+0x28/0x230 ? _raw_spin_unlock+0xa/0x20 ? __handle_mm_fault+0x7d6/0x9b0 ? list_lru_add+0xa8/0xc0 ? _raw_spin_unlock+0xa/0x20 ? __alloc_fd+0xaf/0x160 ? do_sys_open+0x1a6/0x230 do_sys_open+0x1a6/0x230 do_syscall_64+0x5a/0x100 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-04-10scsi: devinfo: Add Microsoft iSCSI target to 1024 sector blacklistRoss Lagerwall1-1/+1
The Windows Server 2016 iSCSI target doesn't work with the Linux kernel initiator since the kernel started sending larger requests by default, nor does it implement the block limits VPD page. Apply the sector limit workaround for these targets. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: KY Srinivasan <kys@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler()Dan Carpenter1-4/+4
Smatch marks skb->data as untrusted so it complains that there is a potential overflow here: drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:2111 t4_uld_rx_handler() error: buffer overflow 'cxgb4i_cplhandlers' 239 <= 255. In this case, skb->data comes from the hardware or firmware so it's not going to overflow unless there is a firmware bug. [mkp: fixed braces] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: dpt_i2o: Use after free in I2ORESETCMD ioctlDan Carpenter1-5/+8
Here is another use after free if we reset the card. The adpt_hba_reset() function frees "pHba" on error. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: core: Make scsi_result_to_blk_status() recognize CONDITION METBart Van Assche1-0/+9
Ensure that CONDITION MET and other non-zero status values that indicate success are translated into BLK_STS_OK. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Lee Duncan <lduncan@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: core: Rename __scsi_error_from_host_byte() into ↵Bart Van Assche1-9/+9
scsi_result_to_blk_status() Since the next patch will modify this function such that it checks more than just the host byte of the SCSI result, rename __scsi_error_from_host_byte() into scsi_result_to_blk_status(). This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Lee Duncan <lduncan@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10Revert "scsi: core: return BLK_STS_OK for DID_OK in ↵Bart Van Assche1-2/+0
__scsi_error_from_host_byte()" The description of commit e39a97353e53 is wrong: it mentions that commit 2a842acab109 introduced a bug in __scsi_error_from_host_byte() although that commit did not change the behavior of that function. Additionally, commit e39a97353e53 introduced a bug: it causes commands that fail with hostbyte=DID_OK and driverbyte=DRIVER_SENSE to be completed with BLK_STS_OK. Hence revert that commit. Fixes: e39a97353e53 ("scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()") Reported-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Lee Duncan <lduncan@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: aacraid: Insure command thread is not recursively stoppedDave Carroll2-1/+4
If a recursive IOP_RESET is invoked, usually due to the eh_thread handling errors after the first reset, be sure we flag that the command thread has been stopped to avoid an Oops of the form; [ 336.620256] CPU: 28 PID: 1193 Comm: scsi_eh_0 Kdump: loaded Not tainted 4.14.0-49.el7a.ppc64le #1 [ 336.620297] task: c000003fd630b800 task.stack: c000003fd61a4000 [ 336.620326] NIP: c000000000176794 LR: c00000000013038c CTR: c00000000024bc10 [ 336.620361] REGS: c000003fd61a7720 TRAP: 0300 Not tainted (4.14.0-49.el7a.ppc64le) [ 336.620395] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 22084022 XER: 20040000 [ 336.620435] CFAR: c000000000130388 DAR: 0000000000000000 DSISR: 40000000 SOFTE: 1 [ 336.620435] GPR00: c00000000013038c c000003fd61a79a0 c0000000014c7e00 0000000000000000 [ 336.620435] GPR04: 000000000000000c 000000000000000c 9000000000009033 0000000000000477 [ 336.620435] GPR08: 0000000000000477 0000000000000000 0000000000000000 c008000010f7d940 [ 336.620435] GPR12: c00000000024bc10 c000000007a33400 c0000000001708a8 c000003fe3b881d8 [ 336.620435] GPR16: c000003fe3b88060 c000003fd61a7d10 fffffffffffff000 000000000000001e [ 336.620435] GPR20: 0000000000000001 c000000000ebf1a0 0000000000000001 c000003fe3b88000 [ 336.620435] GPR24: 0000000000000003 0000000000000002 c000003fe3b88840 c000003fe3b887e8 [ 336.620435] GPR28: c000003fe3b88000 c000003fc8181788 0000000000000000 c000003fc8181700 [ 336.620750] NIP [c000000000176794] exit_creds+0x34/0x160 [ 336.620775] LR [c00000000013038c] __put_task_struct+0x8c/0x1f0 [ 336.620804] Call Trace: [ 336.620817] [c000003fd61a79a0] [c000003fe3b88000] 0xc000003fe3b88000 (unreliable) [ 336.620853] [c000003fd61a79d0] [c00000000013038c] __put_task_struct+0x8c/0x1f0 [ 336.620889] [c000003fd61a7a00] [c000000000171418] kthread_stop+0x1e8/0x1f0 [ 336.620922] [c000003fd61a7a40] [c008000010f7448c] aac_reset_adapter+0x14c/0x8d0 [aacraid] [ 336.620959] [c000003fd61a7b00] [c008000010f60174] aac_eh_host_reset+0x84/0x100 [aacraid] [ 336.621010] [c000003fd61a7b30] [c000000000864f24] scsi_try_host_reset+0x74/0x180 [ 336.621046] [c000003fd61a7bb0] [c000000000867ac0] scsi_eh_ready_devs+0xc00/0x14d0 [ 336.625165] [c000003fd61a7ca0] [c0000000008699e0] scsi_error_handler+0x550/0x730 [ 336.632101] [c000003fd61a7dc0] [c000000000170a08] kthread+0x168/0x1b0 [ 336.639031] [c000003fd61a7e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4 [ 336.645971] Instruction dump: [ 336.648743] 384216a0 7c0802a6 fbe1fff8 f8010010 f821ffd1 7c7f1b78 60000000 60000000 [ 336.657056] 39400000 e87f0838 f95f0838 7c0004ac <7d401828> 314affff 7d40192d 40c2fff4 [ 336.663997] -[ end trace 4640cf8d4945ad95 ]- So flag when the thread is stopped by setting the thread pointer to NULL. Signed-off-by: Dave Carroll <david.carroll@microsemi.com> Reviewed-by: Raghava Aditya Renukunta <raghavaaditya.renukunta@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: qla2xxx: Correct setting of SAM_STAT_CHECK_CONDITIONJohannes Thumshirn1-3/+3
Bart reports that in qla_isr.c's qla2x00_handle_dif_error we're wrongly shifting the SAM_STAT_CHECK_CONDITION by one instead of directly ORing it onto the SCSI command's result. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: qla2xxx: correctly shift host byteJohannes Thumshirn1-1/+1
The SCSI host byte has to be shifted by 16 not 6. As Bart pointed out this patch does not change any functionality because DID_OK == 0, but a wrong shift is irritating for the reviewer. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: qla2xxx: Fix race condition between iocb timeout and initialisationBen Hutchings8-31/+45
qla2x00_init_timer() calls add_timer() on the iocb timeout timer, which means the timeout function pointer and any data that the function depends on must be initialised beforehand. Move this initialisation before each call to qla2x00_init_timer(). In some cases qla2x00_init_timer() initialises a completion structure needed by the timeout function, so move the call to add_timer() after that. Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-10scsi: qla2xxx: Avoid double completion of abort commandBen Hutchings1-2/+2
qla2x00_tmf_sp_done() now deletes the timer that will run qla2x00_tmf_iocb_timeout(), but doesn't check whether the timer already expired. Check the return value from del_timer() to avoid calling complete() a second time. Fixes: 4440e46d5db7 ("[SCSI] qla2xxx: Add IOCB Abort command asynchronous ...") Fixes: 1514839b3664 ("scsi: qla2xxx: Fix NULL pointer crash due to active ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-09scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failureBill Kuzeja1-23/+21
The code that fixes the crashes in the following commit introduced a small memory leak: commit 6a2cf8d3663e ("scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure") Fixing this requires a bit of reworking, which I've explained. Also provide some code cleanup. There is a small window in qla2x00_probe_one where if qla2x00_alloc_queues fails, we end up never freeing req and rsp and leak 0xc0 and 0xc8 bytes respectively (the sizes of req and rsp). I originally put in checks to test for this condition which were based on the incorrect assumption that if ha->rsp_q_map and ha->req_q_map were allocated, then rsp and req were allocated as well. This is incorrect. There is a window between these allocations: ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp); goto probe_hw_failed; [if successful, both rsp and req allocated] base_vha = qla2x00_create_host(sht, ha); goto probe_hw_failed; ret = qla2x00_request_irqs(ha, rsp); goto probe_failed; if (qla2x00_alloc_queues(ha, req, rsp)) { goto probe_failed; [if successful, now ha->rsp_q_map and ha->req_q_map allocated] To simplify this, we should just set req and rsp to NULL after we free them. Sounds simple enough? The problem is that req and rsp are pointers defined in the qla2x00_probe_one and they are not always passed by reference to the routines that free them. Here are paths which can free req and rsp: PATH 1: qla2x00_probe_one ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp); [req and rsp are passed by reference, but if this fails, we currently do not NULL out req and rsp. Easily fixed] PATH 2: qla2x00_probe_one failing in qla2x00_request_irqs or qla2x00_alloc_queues probe_failed: qla2x00_free_device(base_vha); qla2x00_free_req_que(ha, req) qla2x00_free_rsp_que(ha, rsp) PATH 3: qla2x00_probe_one: failing in qla2x00_mem_alloc or qla2x00_create_host probe_hw_failed: qla2x00_free_req_que(ha, req) qla2x00_free_rsp_que(ha, rsp) PATH 1: This should currently work, but it doesn't because rsp and rsp are not set to NULL in qla2x00_mem_alloc. Easily remedied. PATH 2: req and rsp aren't passed in at all to qla2x00_free_device but are derived from ha->req_q_map[0] and ha->rsp_q_map[0]. These are only set up if qla2x00_alloc_queues succeeds. In qla2x00_free_queues, we are protected from crashing if these don't exist because req_qid_map and rsp_qid_map are only set on their allocation. We are guarded in this way: for (cnt = 0; cnt < ha->max_req_queues; cnt++) { if (!test_bit(cnt, ha->req_qid_map)) continue; PATH 3: This works. We haven't freed req or rsp yet (or they were never allocated if qla2x00_mem_alloc failed), so we'll attempt to free them here. To summarize, there are a few small changes to make this work correctly and (and for some cleanup): 1) (For PATH 1) Set *rsp and *req to NULL in case of failure in qla2x00_mem_alloc so these are correctly set to NULL back in qla2x00_probe_one 2) After jumping to probe_failed: and calling qla2x00_free_device, explicitly set rsp and req to NULL so further calls with these pointers do not crash, i.e. the free queue calls in the probe_hw_failed section we fall through to. 3) Fix return code check in the call to qla2x00_alloc_queues. We currently drop the return code on the floor. The probe fails but the caller of the probe doesn't have an error code, so it attaches to pci. This can result in a crash on module shutdown. 4) Remove unnecessary NULL checks in qla2x00_free_req_que, qla2x00_free_rsp_que, and the egregious NULL checks before kfrees and vfrees in qla2x00_mem_free. I tested this out running a scenario where the card breaks at various times during initialization. I made sure I forced every error exit path in qla2x00_probe_one. Cc: <stable@vger.kernel.org> # v4.16 Fixes: 6a2cf8d3663e ("scsi: qla2xxx: Fix crashes in qla2x00_probe_one on probe failure") Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-09scsi: scsi_dh: Don't look for NULL devices handlers by nameJohannes Thumshirn1-0/+3
Currently scsi_dh_lookup() doesn't check for NULL as a device name. This combined with nvme over dm-mpath results in the following messages emitted by device-mapper: device-mapper: multipath: Could not failover device 259:67: Handler scsi_dh_(null) error 14. Let scsi_dh_lookup() fail fast on NULL names. [mkp: typo fix] Cc: <stable@vger.kernel.org> # v4.16 Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-09scsi: core: remove redundant assignment to shost->use_blk_mqColin Ian King1-1/+0
The first assignment to shost->use_blk_mq is redundant as it is overwritten by the following statement. Remove this redundant code. Detected by CoverityScan, CID#1466993 ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-04-06Merge tag 'scsi-for-linus' of ↵Linus Torvalds154-10408/+5293
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is mostly updates of the usual drivers: arcmsr, qla2xx, lpfc, ufs, mpt3sas, hisi_sas. In addition we have removed several really old drivers: sym53c416, NCR53c406a, fdomain, fdomain_cs and removed the old scsi_module.c initialization from all remaining drivers. Plus an assortment of bug fixes, initialization errors and other minor fixes" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (168 commits) scsi: ufs: Add support for Auto-Hibernate Idle Timer scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entries scsi: qla2xxx: fx00 copypaste typo scsi: qla2xxx: fix error message on <qla2400 scsi: smartpqi: update driver version scsi: smartpqi: workaround fw bug for oq deletion scsi: arcmsr: Change driver version to v1.40.00.05-20180309 scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter ready scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection. scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug scsi: qla2xxx: Update driver version to 10.00.00.06-k scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan scsi: qla2xxx: Cleanup code to improve FC-NVMe error handling scsi: qla2xxx: Fix FC-NVMe IO abort during driver reset scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSY scsi: qla2xxx: Remove nvme_done_list scsi: qla2xxx: Return busy if rport going away scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB change scsi: qla2xxx: Add FC-NVMe abort processing scsi: qla2xxx: Add changes for devloss timeout in driver ...
2018-04-06Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-blockLinus Torvalds13-21/+18
Pull block layer updates from Jens Axboe: "It's a pretty quiet round this time, which is nice. This contains: - series from Bart, cleaning up the way we set/test/clear atomic queue flags. - series from Bart, fixing races between gendisk and queue registration and removal. - set of bcache fixes and improvements from various folks, by way of Michael Lyle. - set of lightnvm updates from Matias, most of it being the 1.2 to 2.0 transition. - removal of unused DIO flags from Nikolay. - blk-mq/sbitmap memory ordering fixes from Omar. - divide-by-zero fix for BFQ from Paolo. - minor documentation patches from Randy. - timeout fix from Tejun. - Alpha "can't write a char atomically" fix from Mikulas. - set of NVMe fixes by way of Keith. - bsg and bsg-lib improvements from Christoph. - a few sed-opal fixes from Jonas. - cdrom check-disk-change deadlock fix from Maurizio. - various little fixes, comment fixes, etc from various folks" * tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits) blk-mq: Directly schedule q->timeout_work when aborting a request blktrace: fix comment in blktrace_api.h lightnvm: remove function name in strings lightnvm: pblk: remove some unnecessary NULL checks lightnvm: pblk: don't recover unwritten lines lightnvm: pblk: implement 2.0 support lightnvm: pblk: implement get log report chunk lightnvm: pblk: rename ppaf* to addrf* lightnvm: pblk: check for supported version lightnvm: implement get log report chunk helpers lightnvm: make address conversions depend on generic device lightnvm: add support for 2.0 address format lightnvm: normalize geometry nomenclature lightnvm: complete geo structure with maxoc* lightnvm: add shorten OCSSD version in geo lightnvm: add minor version to generic geometry lightnvm: simplify geometry structure lightnvm: pblk: refactor init/exit sequences lightnvm: Avoid validation of default op value lightnvm: centralize permission check for lightnvm ioctl ...
2018-04-05Merge branch 'for-linus' of ↵Linus Torvalds4-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: kfifo: fix inaccurate comment tools/thermal: tmon: fix for segfault net: Spelling s/stucture/structure/ edd: don't spam log if no EDD information is present Documentation: Fix early-microcode.txt references after file rename tracing: Block comments should align the * on each line treewide: Fix typos in printk GenWQE: Fix a typo in two comments treewide: Align function definition open/close braces
2018-04-04Merge branch 'fixes' into miscJames Bottomley40-389/+416
Somewhat nasty merge due to conflicts between "33b28357dd00 scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan" and "2b5b96473efc scsi: qla2xxx: Fix FC-NVMe LUN discovery" Merge is non-trivial and has been verified by Qlogic (Cavium) Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
2018-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller10-147/+125
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28blk-mq: Allow PCI vector offset for mapping queuesKeith Busch2-2/+2
The PCI interrupt vectors intended to be associated with a queue may not start at 0; a driver may allocate pre_vectors for special use. This patch adds an offset parameter so blk-mq may find the intended affinity mask and updates all drivers using this API accordingly. Cc: Don Brace <don.brace@microsemi.com> Cc: <qla2xxx-upstream@qlogic.com> Cc: <linux-scsi@vger.kernel.org> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-28Merge tag 'scsi-fixes' of ↵Linus Torvalds10-147/+125
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two driver fixes (ibmvfc, iscsi_tcp) and a USB fix for devices that give the wrong return to Read Capacity and cause a huge log spew. The remaining five patches all try to fix commit 84676c1f21e8 ("genirq/affinity: assign vectors to all possible CPUs") which broke the non-mq I/O path" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi_tcp: set BDI_CAP_STABLE_WRITES when data digest enabled scsi: sd: Remember that READ CAPACITY(16) succeeded scsi: ibmvfc: Avoid unnecessary port relogin scsi: virtio_scsi: unify scsi_host_template scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity scsi: core: introduce force_blk_mq scsi: megaraid_sas: fix selection of reply queue scsi: hpsa: fix selection of reply queue
2018-03-27treewide: Fix typos in printkMasanari Iida2-3/+3
This patch fixes spelling typos found in printk. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-26treewide: Align function definition open/close bracesJoe Perches2-2/+2
Some functions definitions have either the initial open brace and/or the closing brace outside of column 1. Move those braces to column 1. This allows various function analyzers like gnu complexity to work properly for these modified functions. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller17-139/+180
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22scsi: ufs: Add support for Auto-Hibernate Idle TimerAdrian Hunter4-0/+112
UFS host controllers may support an autonomous power management feature called the Auto-Hibernate Idle Timer. The timer is set to the number of microseconds of idle time before the UFS host controller will autonomously put the link into Hibernate state. That will save power at the expense of increased latency. Any access to the host controller interface registers will automatically put the link out of Hibernate state. So once configured, the feature is transparent to the driver. Expose the Auto-Hibernate Idle Timer value via SysFS to allow users to choose between power efficiency or lower latency. Set a default value of 150 ms. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entriesStanislav Nijnikov1-45/+47
Read from these files will return the integer value of the chosen power management level now. Separate entries were added to show the target UFS device and UIC link states. The description of the possible power managements levels was added to the ABI file. The on-write behaviour of these entries wasn't changed. [mkp: typo] Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: fx00 copypaste typoMeelis Roos1-1/+1
Fix an obvious copy-paste error in freeing QLAFX00 response queue - the code checked for rsp->ring but freed rsp->ring_fx00. [mkp: applied by hand] Signed-off-by: Meelis Roos <mroos@linux.ee> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: fix error message on <qla2400Meelis Roos2-6/+14
This patch fixes IO traps caught by hardware when mailbox command fails on qla2200. The error handler assumes newer firmware that is available on 2400 and newer HBA-s. This causes ugly crashes on sparc64. Fix it with separate debug prints on different firmware generations like most other places do. [mkp: updated based on feedback from Himanshu] Signed-off-by: Meelis Roos <mroos@linux.ee> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: smartpqi: update driver versionDon Brace1-3/+3
Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Gerry Morong <gerry.morong@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: smartpqi: workaround fw bug for oq deletionKevin Barnett1-36/+3
Skip deleting PQI operational queues when there is an error creating a new queue group. It's not really necessary to delete the queues anyway because they get deleted during the PQI reset that is part of the error recovery path. Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: arcmsr: Change driver version to v1.40.00.05-20180309Ching Huang1-1/+1
Change driver version to v1.40.00.05-20180309 Signed-off-by: Ching Huang <ching2048@areca.com.tw> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter readyChing Huang1-0/+10
Sleep to avoid CPU stuck too long for waiting adapter ready. Signed-off-by: Ching Huang <ching2048@areca.com.tw> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection.Ching Huang1-0/+80
Handle adapter removed due to thunderbolt cable disconnection. Signed-off-by: Ching Huang <ching2048@areca.com.tw> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter ↵Ching Huang1-1/+1
hot-plug Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug. Signed-off-by: Ching Huang <ching2048@areca.com.tw> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: Update driver version to 10.00.00.06-khimanshu.madhani@cavium.com1-1/+1
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scanQuinn Tran5-71/+229
This patch combines FCP and FC-NVMe scan into single scan when driver detects FC-NVMe capability on same port. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: Cleanup code to improve FC-NVMe error handlingDarren Trapp2-51/+29
This patch cleans up ABTS handling for FC-NVMe by - Removing allocation of sp, instead pass the sp pointer for abort IOCB - Fix error handling from Trasport failure - set outstanding_cmds array to NULL for nvme completion Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: Fix FC-NVMe IO abort during driver resetDarren Trapp3-7/+14
Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSYDarren Trapp3-4/+18
Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: Remove nvme_done_listDarren Trapp6-22/+2
Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: Return busy if rport going awayDarren Trapp3-12/+24
This patch adds mechanism to return EBUSY if rport is going away to prevent exhausting FC-NVMe layer's retry counter. Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB changeDarren Trapp3-5/+3
On a port db changes, this patch will set n2n_ae flag for N2N connection when requesting for Report ID Acquition MBX, instead of Loop Initialization or point to point asynchronous events. Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: Add FC-NVMe abort processingDarren Trapp2-18/+19
Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: Add changes for devloss timeout in driverDarren Trapp7-90/+87
Add support for error recovery within devloss timeout, now that FC-NVMe transport support devloss timeout. Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: Set IIDMA and fcport state before qla_nvme_register_remote()Darren Trapp1-2/+3
Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: Remove unneeded message and minor cleanup for FC-NVMehimanshu.madhani@cavium.com1-8/+3
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: qla2xxx: Restore ZIO threshold settingDarren Trapp1-5/+0
Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-22scsi: devinfo: remove dasd devices from the scsi subsystemXose Vazquez Perez1-10/+0
Only present through ccw bus. [mkp: applied by hand] Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com> Cc: Takahiro Yasui <takahiro.yasui@hitachivantara.com> Cc: Anthony Cheung <anthony.cheung@hpe.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: s390 ML <linux-s390@vger.kernel.org> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: device-mapper development <dm-devel@redhat.com> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>