summaryrefslogtreecommitdiff
path: root/drivers/sh/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2014-08-22sh: intc: Confine SH_INTC to platforms that need itGeert Uytterhoeven1-2/+1
Currently the sh-intc driver is compiled on all SuperH and non-multiplatform SH-Mobile platforms, while it's only used on a limited number of platforms: - SuperH: SH2(A), SH3(A), SH4(A)(L) (all but SH5) - ARM: sh7372, sh73a0 Drop the "default y" on SH_INTC, make all CPU platforms that use it select it, and protect all sub-options by "if SH_INTC" to fix this. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-05-12drivers: sh: compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTIGeert Uytterhoeven1-6/+8
If the kernel is built to support multi-ARM configuration with shmobile support built in, then drivers/sh is not built. This contains the PM runtime code in drivers/sh/pm_runtime.c, which implicitly enables the module clocks for all devices, and thus is quite essential. Without this, the state of clocks depends on implicit reset state, or on the bootloader. If ARCH_SHMOBILE_MULTI then build the drivers/sh directory, but ensure that bits that may conflict (drivers/sh/clk if the common clock framework is enabled) or are not used (drivers/sh/intc), are not built. Also, only enable the PM runtime code when actually running on a shmobile SoCs that needs it. ARCH_SHMOBILE_MULTI was added a while ago by commit efacfce5f8a523457e9419a25d52fe39db00b26a ("ARM: shmobile: Introduce ARCH_SHMOBILE_MULTI"), but drivers/sh was compiled for both ARCH_SHMOBILE_LEGACY and ARCH_SHMOBILE_MULTI until commit bf98c1eac1d4a6bcf00532e4fa41d8126cd6c187 ("ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY"). Inspired by a patch from Ben Dooks <ben.dooks@codethink.co.uk>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-01-25sh-pfc: Move driver from drivers/sh/ to drivers/pinctrl/Laurent Pinchart1-1/+0
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2012-07-10sh: pfc: Shuffle PFC support core.Paul Mundt1-2/+2
This follows the intc/clk changes and shuffles the PFC support code under its own directory. This will facilitate better code sharing, and allow us to trim down the exported interface by quite a margin. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-20sh: pfc: Make gpio chip support optional where possible.Paul Mundt1-1/+2
This implements some Kconfig knobs for ensuring that the PFC gpio chip can be disabled or built as a module in the cases where it's optional, or forcibly enabled in cases where it's not. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-20sh: pfc: Split out gpio chip support.Paul Mundt1-1/+1
This implements a bit of rework for the PFC code, making the core itself slightly more pluggable and moving out the gpio chip handling completely. The API is preserved in such a way that platforms that depend on it for early configuration are still able to do so, while making it possible to migrate to alternate interfaces going forward. This is the first step of chainsawing necessary to support the pinctrl API, with the eventual goal being able to decouple pin function state from the gpio API while retaining gpio chip tie-in for gpio pin functions only, relying on the pinctrl/pinmux API for non-gpio function demux. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-12sh: also without PM_RUNTIME pm_runtime.o must be builtGuennadi Liakhovetski1-1/+1
When CONFIG_PM_RUNTIME is off, drivers/sh/pm_runtime.o still has to be built on sh platforms, because then it provides means to statically switch on device PM clocks. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-18sh: Kill off remaining private runtime PM bits.Paul Mundt1-11/+1
This kills of the now unused runtime PM stub in favour of the generic one. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-17sh: sh7723: use runtime PM implementation, common with arm/mach-shmobileGuennadi Liakhovetski1-1/+2
Switch sh7723 to a runtime PM implementation, common with ARM-based sh-mobile platforms. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-17sh: sh7722: use runtime PM implementation, common with arm/mach-shmobileGuennadi Liakhovetski1-0/+1
Switch sh7722 to a runtime PM implementation, common with ARM-based sh-mobile platforms. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-17sh: sh7724: use runtime PM implementation, common with arm/mach-shmobileGuennadi Liakhovetski1-0/+1
Switch sh7724 to a runtime PM implementation, common with ARM-based sh-mobile platforms. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11drivers: sh: Generalize runtime PM platform stub.Paul Mundt1-0/+8
The runtime PM platform support stub in use by ARM-based SH/R-Mobile platforms contains nothing that's specifically ARM-related and instead of wholly generic to anything using the clock framework. The recent runtime PM changes interact rather badly with the lazy disabling of clocks late in the boot process through the clock framework, leading to situations where the runtime suspend/resume paths are entered without a clock being actively driven due to having been lazily gated off. In order to correct this we can trivially tie in the aforementioned stub as a general fallback for all SH platforms that don't presently have their own runtime PM implementations (the corner case being SH-based SH-Mobile platforms, which have their own stub through the hwblk API -- which in turn has bitrotted and will be subsequently adapted to use the same stub as everyone else), regardless of whether the platforms choose to define power domains of their own or not. This fixes up regressions for clock framework users who also build in runtime PM support without any specific power domains of their own, which was previously causing the serial console to be lost when warring with lazy clock disabling. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-18sh: clkfwk: Shuffle around to match the intc split up.Paul Mundt1-4/+3
This shuffles the clock framework code around to a drivers/sh/clk subdir, to follow the intc split up. This will make it easier to subsequently break things out as well as plug in different helpers for non-CPG users. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05sh: intc: Split up the INTC code.Paul Mundt1-1/+1
This splits up the sh intc core in to something more vaguely resembling a subsystem. Most of the functionality was alread fairly well compartmentalized, and there were only a handful of interdependencies that needed to be resolved in the process. This also serves as future-proofing for the genirq and sparseirq rework, which will make some of the split out functionality wholly generic, allowing things to be killed off in place with minimal migration pain. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-20ARM: mach-shmobile: Use shared clock frameworkMagnus Damm1-2/+3
Teach SH-Mobile ARM how to make use of the shared SH clock framework. This commit is one atomic switch that dumps the local hackery and instead links in the shared clock framework code in drivers/sh. A few local functions are kept in clock.c. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13sh: move sh clock-cpg.c contents to drivers/sh/clk-cpg.cMagnus Damm1-0/+1
Move the CPG helpers to drivers/sh/clk-cpg.c V2. This to allow SH-Mobile ARM to share the code with SH. All functions except the legacy CPG stuff is moved. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-13sh: move sh clock.c contents to drivers/sh/clk.Magnus Damm1-0/+1
This patch is V2 of the SH clock framework move from arch/sh/kernel/cpu/clock.c to drivers/sh/clk.c. All code except the following functions are moved: clk_init(), clk_get() and clk_put(). The init function is still kept in clock.c since it depends on the SH-specific machvec implementation. The symbols clk_get() and clk_put() already exist in the common ARM clkdev code, those symbols are left in the SH tree to avoid duplicating them for SH-Mobile ARM. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-30sh: Break out SuperH PFC codeMagnus Damm1-0/+1
This file breaks out the SuperH PFC code from arch/sh/kernel/gpio.c + arch/sh/include/asm/gpio.h to drivers/sh/pfc.c + include/linux/sh_pfc.h. Similar to the INTC stuff. The non-SuperH specific file location makes it possible to share the code between multiple architectures. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01sh: Move the shared INTC code out to drivers/sh/Paul Mundt1-1/+1
The INTC code will be re-used across different architectures, so move this out to drivers/sh/ and include/linux/sh_intc.h respectively. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21sh: Add maple bus support for the SEGA Dreamcast.Adrian McMenamin1-2/+2
The Maple bus is SEGA's proprietary serial bus for peripherals (keyboard, mouse, controller etc). The bus is capable of some (limited) hotplugging and operates at up to 2 M/bits. Drivers of one sort or another existed/exist for 2.4 and a rudimentary port, which didn't support the 2.6 device driver model was also in existence. This driver - for the bus logic itself and for the keyboard (other drivers will follow) are based on the code and concepts of those old drivers but have lots of completely rewritten parts. I have the maple bus code as a built in now as that seems the sane and rational way to handle something like that - you either want the bus or you don't. Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2005-04-17Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+6
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!