summaryrefslogtreecommitdiff
path: root/drivers/soc
AgeCommit message (Collapse)AuthorFilesLines
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar1-0/+1
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-24Merge tag 'armsoc-drivers' of ↵Linus Torvalds19-54/+632
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs. A handful of driver changes this time around. The larger changes are: - Reset drivers for hi3660 and zx2967 - AHCI driver for Davinci, acked by Tejun and brought in here due to platform dependencies - Cleanups of atmel-ebi (External Bus Interface) - Tweaks for Rockchip GRF (General Register File) usage (kitchensink misc register range on the SoCs) - PM domains changes for support of two new ZTE SoCs (zx296718 and zx2967)" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits) soc: samsung: pmu: Add register defines for pad retention control reset: make zx2967 explicitly non-modular reset: core: fix reset_control_put soc: samsung: pm_domains: Read domain name from the new label property soc: samsung: pm_domains: Remove message about failed memory allocation soc: samsung: pm_domains: Remove unused name field soc: samsung: pm_domains: Use full names in subdomains registration log sata: ahci-da850: un-hardcode the MPY bits sata: ahci-da850: add a workaround for controller instability sata: ahci: export ahci_do_hardreset() locally sata: ahci-da850: implement a workaround for the softreset quirk sata: ahci-da850: add device tree match table sata: ahci-da850: get the sata clock using a connection id soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register memory: atmel-ebi: Enable the SMC clock if specified soc: samsung: pmu: Remove unused and duplicated defines memory: atmel-ebi: Properly handle multiple reference to the same CS memory: atmel-ebi: Fix the test to enable generic SMC logic soc: samsung: pm_domains: Add new Exynos5433 compatible soc: samsung: pmu: Add dummy support for Exynos5433 SoC ...
2017-02-24Merge tag 'armsoc-soc' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "In the SoC branch we normally collect classic arch/arm/mach-* contents, i.e. C code changes for SoC platforms. This release cycle the diffstat is quite nice, in that we're removing 3x the amount of code that's being added. The main reason for this is that there's a removal of camera drivers for Freescale i.MX chips (driver was removed so the device registration isn't needed any more). There's also removal of display initialization code for OMAP that is no longer needed. The rest are mostly minor tweaks and cleanups; constification on Samsung platforms, cleanup of ux500 platform data, purge of other unused platform data/device seutp on i.MX and other good stuff. New SoC support this cycle is for two Allwinner platforms, H2+ and V3s" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits) ARM: ux500: remove deleted file from Makefile ARM: ep93xx: Disable TS-72xx watchdog before uncompressing ARM: ux500: cut some platform data MAINTAINERS: Update for the current location of the bcm2835 tree. ARM: davinci: remove BUG_ON() from da850_register_sata() ARM: davinci: da850: model the SATA refclk ARM: davinci: da850: add con_id for the SATA clock ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA arm: mvebu: support for SMP on 98DX3336 SoC dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property soc: dove: constify reset_control_ops structures ARM: mv78xx0: fix possible PCI buffer overflow MAINTAINERS: transfer maintainership for the EZX platform ARM: shmobile: rcar-gen2: Add more register documentation ARM: tegra: paz00: Fix __initdata placement ARM: OMAP: clock: Remove unused mpurate cmdline option ARM: davinci: add skeleton for pdata-quirks arm: sunxi: add support for V3s SoC ARM: OMAP2+: omap_hwmod: Add support for earlycon arm: hisi: drop extern hip01_cpu_die ...
2017-02-23Merge tag 'rproc-v4.11' of git://github.com/andersson/remoteprocLinus Torvalds3-0/+209
Pull remoteproc updates from Bjorn Andersson: "This introduces support for booting the dedicated sensor core in the Qualcomm MSM8996, updates the Qualcomm ADSP and Hexagon drivers to utilize SMD subdevice helpers for properly handle shutdowns and restarts of the remoteproc, add virtio support to the ST remoteproc and refactor the Qualcomm Hexagon driver to handle variations between platforms. The support code for parsing, loading and authenticating Qualcomm firmware files (MDT) is refactored and move to drivers/soc/qcom, to allow for non-remoteproc drivers to utilize this. Finally it brings some cleanups to the remoteproc core" * tag 'rproc-v4.11' of git://github.com/andersson/remoteproc: (27 commits) remoteproc: qcom: mdt_loader: Use signed type for offset remoteproc: st: add virtio communication support remoteproc: st: correct probe error management remoteproc: Modify the function names remoteproc: Reduce asynchronous request_firmware to auto-boot only remoteproc: Drop qcom_scm_pas_supported() from adsp_probe() MAINTAINERS: Add missing rpmsg include path remoteproc: qcom: Use common SMD edge handler remoteproc: qcom: wcnss: Make SMD handling common remoteproc: Move qcom_mdt_loader into drivers/soc/qcom remoteproc: qcom: mdt_loader: Refactor MDT loader remoteproc: qcom: mdt_loader: Don't overwrite firmware object remoteproc: qcom: Extract non-mdt related helper remoteproc: qcom: q6v5: Decouple driver from MDT loader remoteproc: qcom: q6v5: Remove mss supply from 8916 remoteproc: qcom: fix initializers for qcom_mss_reg_res array remoteproc: Drop firmware_loading_complete remoteproc: Add RPROC_DELETED state remoteproc: Move rproc_delete_debug_dir() to rproc_del() remoteproc: qcom: Add SLPI rproc support to load and boot slpi proc. ...
2017-02-22remoteproc: qcom: mdt_loader: Use signed type for offsetBjorn Andersson1-1/+1
In the transition from using rproc_da_to_va(), the type of the load offset became unsigned. This causes the subsequent check to let negative values less than p_memsz + mem_size through and we write outside of the buffer. Change the type back to a signed value to catch this. Fixes: 7f0dd07a9b29 ("remoteproc: qcom: mdt_loader: Refactor MDT loader") Fixes: e7fd25226295 ("remoteproc: qcom: q6v5: Decouple driver from MDT loader") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-02-07Merge tag 'samsung-drivers-soc-pm-domains-4.11' of ↵Arnd Bergmann1-10/+14
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Pull "soc: samsung: pm_domains for v4.11" from Krzysztof Kozłowski: Improve the PM domains driver for Exynos by displaying a user-friendly name of power domain. Till now, the name of node from DT was used which mostly is just "power-domain". We need more than that. * tag 'samsung-drivers-soc-pm-domains-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: pm_domains: Read domain name from the new label property soc: samsung: pm_domains: Remove message about failed memory allocation soc: samsung: pm_domains: Remove unused name field soc: samsung: pm_domains: Use full names in subdomains registration log
2017-02-06remoteproc: Move qcom_mdt_loader into drivers/soc/qcomBjorn Andersson3-0/+209
With the remoteproc parts cleaned out of the MDT loader we can move it to drivers/soc/qcom. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-31soc: samsung: pm_domains: Read domain name from the new label propertyMarek Szyprowski1-2/+10
Device tree nodes for each power domain should use generic "power-domain" name, so using it as a domain name doesn't give much benefits. This patch adds support for human readable names defined in 'label' property. Such names are visible to userspace and makes debugging much easier. When no 'label' property is found, driver keeps using the name constructed from full node name. Suggested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-31soc: samsung: pm_domains: Remove message about failed memory allocationMarek Szyprowski1-2/+0
Memory subsystem already prints message about failed memory allocation, there is no need to do it in the drivers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-31soc: samsung: pm_domains: Remove unused name fieldMarek Szyprowski1-4/+2
Name is now in generic pm domain structure, so there is no need to duplicate it in private data. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-31soc: samsung: pm_domains: Use full names in subdomains registration logMarek Szyprowski1-2/+2
Device tree none name for each power domain should be "power-domain", so use a bit more descriptive full node name in messages about subdomain registration. This way the following meaningless message: power-domain has as child subdomain: power-domain. is changed to a bit more meaningful one: /soc/power-domain@105c40a0 has as child subdomain: /soc/power-domain@105c4020. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-30Merge tag 'v4.10-rc6' into develLinus Walleij1-0/+1
Linux 4.10-rc6 Resolved conflicts in: drivers/pinctrl/pinctrl-amd.c drivers/pinctrl/samsung/pinctrl-exynos.c
2017-01-30Merge tag 'samsung-drivers-soc-pmu-4.11-2' of ↵Olof Johansson4-5/+14
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/drivers Continuation of improvements for Exynos PM drivers for v4.11: 1. Add support for Exynos5433 to Power Management Unit (PMU) and Power Domains drivers. 2. Cleanups of duplicated and unused defines. * tag 'samsung-drivers-soc-pmu-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register soc: samsung: pmu: Remove unused and duplicated defines soc: samsung: pm_domains: Add new Exynos5433 compatible soc: samsung: pmu: Add dummy support for Exynos5433 SoC Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'zte-pd-4.11' of ↵Olof Johansson7-0/+389
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers ZTE PM domain driver support for 4.11: - It includes a series which adds DT bindings and PM domain driver for PCU (Power Control Unit) block found on ZTE ZX2967 family SoC. * tag 'zte-pd-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: zte: pm_domains: Add support for zx296718 soc: zte: pm_domains: Prepare for supporting ARMv8 zx2967 family soc: zte: Add header for PM domains specifiers MAINTAINERS: add zx2967 SoC drivers to ARM ZTE architecture dt-bindings: zte: add bindings document for zx2967 power domain controller Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'omap-for-v4.11/drivers-signed' of ↵Olof Johansson1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers Just a single wkup_m3_ipc clean-up for v4.11 merge window. We don't currently have anything else for drivers/soc to merge, but I'd expect that to change as soon as we can start moving PM code into drivers with the recently posted SRAM changes. Anyways, sent as a separate pull request to make it easy to group the ARM SoC pull requests. * tag 'omap-for-v4.11/drivers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: soc: ti: wkup_m3_ipc: Drop wait from wkup_m3_rproc_boot_thread Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'keystone_soc_for_4.11' of ↵Olof Johansson3-31/+13
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers Couple of minor cleanups for Navigator drivers for 4.11 * tag 'keystone_soc_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: soc: ti: knav: cleanup includes and sort header files soc: ti: knav_dma: fix typos in trace message Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-30Merge tag 'v4.11-armsoc-drivers1' of ↵Olof Johansson4-6/+202
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/drivers Some extensions to the power-domain driver to support domains in hiword registers (write-mask in upper 16bit) and domain-definitions for the rk3328 soc. Secondly a "driver" that attaches to the already existing grf nodes and is able to set static defaults for settings that cannot really be attached to any specific subsystem. Most GRF settings can already be set from drivers using them, but there are some behavioural settings like the mmc/jtag switch that cannot. As the commit message states this is really meant as a last line of defence for things that neither belong to a subsystem nor to the Having this here allows arm64 socs to have this as well and also moves another bit of code out of the arm32 mach-rockchip. * tag 'v4.11-armsoc-drivers1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: rockchip: drop rk3288 jtag/mmc switch handling soc: rockchip: add driver handling grf setup dt-bindings: add used but undocumented rockchip grf compatible values soc: rockchip: power-domain: add power domain support for rk3328 dt-bindings: add binding for rk3328 power domains dt-bindings: power: add RK3328 SoCs header for idle-request soc: rockchip: power-domain: Support domain control in hiword-registers Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-27soc: dove: constify reset_control_ops structuresBhumika Goyal1-1/+1
Declare reset_control_ops as const as they are only stored in the ops field of a reset_controller_dev structure. This field is of type const struct reset_control_ops *, so reset_control_ops structures having this property can be declared as const. Done using Coccinelle: @r1 disable optional_qualifier@ identifier i; position p; @@ static struct reset_control_ops i@p={...}; @ok1@ identifier r1.i; position p; struct reset_controller_dev x; @@ x.ops=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct reset_control_ops i; File size before: drivers/soc/dove/pmu.o text data bss dec hex filename 2447 112 16 2575 a0f drivers/soc/dove/pmu.o File size after: drivers/soc/dove/pmu.o text data bss dec hex filename 2479 80 16 2575 a0f drivers/soc/dove/pmu.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-01-27soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION registerKrzysztof Kozlowski2-3/+3
The register ARM_L2_OPTION (0x2608 in Exynos4 and Exynos5 PMU) was defined twice. Both names were used in the Exynos542x code. Simplify this. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-27soc: samsung: pm_domains: Add new Exynos5433 compatibleChanwoo Choi1-0/+7
Add a new compatible string for Exynos5433 because it uses the 0xf value instead of 0x7 for domain on/off registers. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-26soc: samsung: pmu: Add dummy support for Exynos5433 SoCMarek Szyprowski1-2/+4
Add compatible for Exynos5433 SoC, so the driver will bind and let other drivers to use PMU regmap. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-20soc: samsung: pmu: Remove messages for failed memory allocationMarek Szyprowski1-3/+1
Memory subsystem already prints message about failed memory allocation, there is no need to do it in the driver. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-20soc: samsung: pmu: Use of_device_get_match_data helperMarek Szyprowski1-5/+2
Replace custom code with generic helper to retrieve driver data. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-20soc: samsung: pmu: Provide global function to get PMU regmapMarek Szyprowski1-0/+11
PMU is something like a SoC wide service, so add a helper function to get PMU regmap. This will be used by other Exynos device drivers. This way it can be avoided to model this dependency in device tree (as phandles to PMU node) for almost every device in the SoC. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2017-01-13soc: ti: wkup_m3_ipc: Fix error return code in wkup_m3_ipc_probe()Wei Yongjun1-0/+1
Fix to return a negative error code from the kthread_run() error handling case instead of 0, as done elsewhere in this function. Fixes: cdd5de500b2c ("soc: ti: Add wkup_m3_ipc driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-11soc: zte: pm_domains: Add support for zx296718Baoyou Xie2-0/+183
This patch introduces the power domain driver of zx296718 which belongs to zte's zx2967 family. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-11soc: zte: pm_domains: Prepare for supporting ARMv8 zx2967 familyBaoyou Xie6-0/+206
The ARMv8 zx2967 family (296718, 296716 etc) uses different value for controlling the power domain on/off registers, Choose the value depending on the compatible. Multiple domains are prepared for the family, this patch prepares the common functions. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-06soc: ti: knav: cleanup includes and sort header filesMurali Karicheri2-29/+11
This patch cleanup the code to remove unnecessary header files and also sort the header files. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-01-06soc: ti: knav_dma: fix typos in trace messageMurali Karicheri1-2/+2
This patch fixes some typos in the trace message Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2017-01-06soc: ti: wkup_m3_ipc: Drop wait from wkup_m3_rproc_boot_threadSarangdhar Joshi1-2/+0
The function wkup_m3_rproc_boot_thread waits for asynchronous firmware loading to parse the resource table before calling rproc_boot(). However, as the resource table parsing has been moved to rproc_boot(), there's no need to wait for the asynchronous firmware loading completion. So, drop this. CC: Dave Gerlach <d-gerlach@ti.com> CC: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Suman Anna <s-anna@ti.com> Signed-off-by: Sarangdhar Joshi <spjoshi@codeaurora.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-06soc: rockchip: add driver handling grf setupHeiko Stuebner3-0/+145
The General Register Files are an area of registers containing a lot of single-bit settings for numerous components as well full components like usbphy control. Therefore all used components are accessed via the syscon provided by the grf nodes or from the sub-devices created through the simple-mfd created from the grf node. Some settings are not used by anything but will need to be set up according to expectations on the kernel side. Best example is the force_jtag setting, which defaults to on and results in the soc switching the pin-outputs between jtag and sdmmc automatically depending on the card-detect status. This conflicts heavily with how the dw_mmc driver expects to do its work and also with the clock-controller, which has most likely deactivated the jtag clock due to it being unused. So far the handling of this setting was living in the mach-rockchip code for the arm32-based rk3288 but that of course doesn't work for arm64 socs and would also look ugly for further arm32 socs. Also always disabling this setting is quite specific to linux and its subsystems, other operating systems might prefer other settings, so that the bootloader cannot really set a sane default for all. So introduce a top-level driver for the grf that handles these settings that need to be a certain way but nobody cares about. Other needed settings might surface in the future and can then be added here, but only as a last option. Ideally general GRF settings should be handled in the driver needing them. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2017-01-05soc: rockchip: power-domain: add power domain support for rk3328Elaine Zhang1-0/+29
The rk3328 uses the newly introduced support for power-domain control in hiword-mask registers. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-01-05soc: rockchip: power-domain: Support domain control in hiword-registersElaine Zhang1-6/+28
New Rockchips SoCs may have their power-domain control in registers using a writemask-based access scheme (upper 16bit being the write mask). So add a DOMAIN_M type and handle this case accordingly. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-12-16Merge tag 'powerpc-4.10-1' of ↵Linus Torvalds11-192/+202
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for the kexec_file_load() syscall, which is a prereq for secure and trusted boot. - Prevent kernel execution of userspace on P9 Radix (similar to SMEP/PXN). - Sort the exception tables at build time, to save time at boot, and store them as relative offsets to save space in the kernel image & memory. - Allow building the kernel with thin archives, which should allow us to build an allyesconfig once some other fixes land. - Build fixes to allow us to correctly rebuild when changing the kernel endian from big to little or vice versa. - Plumbing so that we can avoid doing a full mm TLB flush on P9 Radix. - Initial stack protector support (-fstack-protector). - Support for dumping the radix (aka. Linux) and hash page tables via debugfs. - Fix an oops in cxl coredump generation when cxl_get_fd() is used. - Freescale updates from Scott: "Highlights include 8xx hugepage support, qbman fixes/cleanup, device tree updates, and some misc cleanup." - Many and varied fixes and minor enhancements as always. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz, Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin, Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain" [ And thanks to Michael, who took time off from a new baby to get this pull request done. - Linus ] * tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits) powerpc/fsl/dts: add FMan node for t1042d4rdb powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb powerpc/fsl/dts: add QMan and BMan nodes on t1024 powerpc/fsl/dts: add QMan and BMan nodes on t1023 soc/fsl/qman: test: use DEFINE_SPINLOCK() powerpc/fsl-lbc: use DEFINE_SPINLOCK() powerpc/8xx: Implement support of hugepages powerpc: get hugetlbpage handling more generic powerpc: port 64 bits pgtable_cache to 32 bits powerpc/boot: Request no dynamic linker for boot wrapper soc/fsl/bman: Use resource_size instead of computation soc/fsl/qe: use builtin_platform_driver powerpc/fsl_pmc: use builtin_platform_driver powerpc/83xx/suspend: use builtin_platform_driver powerpc/ftrace: Fix the comments for ftrace_modify_code powerpc/perf: macros for power9 format encoding powerpc/perf: power9 raw event format encoding powerpc/perf: update attribute_group data structure powerpc/perf: factor out the event format field powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown ...
2016-12-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds11-251/+1042
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, including a couple of newly added drivers: - A new driver for the power management controller on TI Keystone - Support for the prerelease "SCPI" firmware protocol that ended up being shipped by Amlogic in their GXBB SoC. - A soc_device can now be matched using a glob from inside the kernel, when another driver wants to know the specific chip it is running on and cannot find out from DT, firmware or hardware. - Renesas SoCs now support identification through the soc_device interface, both in user space and kernel. - Renesas r8a7743 and r8a7745 gain support for their system controller - A new checking module for the ARM "PSCI" (not to be confused with "SCPI" mentioned above) firmware interface. - A new driver for the Tegra GMI memory interface - Support for the Tegra firmware interfaces with their power management controllers As usual, the updates for the reset controller framework are merged here, as they tend to touch multiple SoCs as well, including a new driver for the Oxford (now Broadcom) OX820 chip and the Tegra bpmp interface. The existing drivers for Atmel, Qualcomm, NVIDIA, TI Davinci, and Rockchips SoCs see some further updates" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits) misc: sram: remove useless #ifdef drivers: psci: Allow PSCI node to be disabled drivers: psci: PSCI checker module soc: renesas: Identify SoC and register with the SoC bus firmware: qcom: scm: Return PTR_ERR when devm_clk_get fails firmware: qcom: scm: Remove core, iface and bus clocks dependency dt-bindings: firmware: scm: Add MSM8996 DT bindings memory: da8xx-ddrctl: drop the call to of_flat_dt_get_machine_name() bus: da8xx-mstpri: drop the call to of_flat_dt_get_machine_name() ARM: shmobile: Document DT bindings for Product Register soc: renesas: rcar-sysc: add R8A7745 support reset: Add Tegra BPMP reset driver dt-bindings: firmware: Allow child nodes inside the Tegra BPMP dt-bindings: Add power domains to Tegra BPMP firmware firmware: tegra: Add BPMP support firmware: tegra: Add IVC library dt-bindings: firmware: Add bindings for Tegra BPMP mailbox: tegra-hsp: Use after free in tegra_hsp_remove_doorbells() mailbox: Add Tegra HSP driver firmware: arm_scpi: add support for pre-v1.0 SCPI compatible ...
2016-12-16Merge tag 'armsoc-fixes-nc' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-urgent fixes from Arnd Bergmann: "As usual, we queue up a few fixes that don't seem urgent enough to go in through -rc, or that just came a little too late given their size. The zx fixes make the platform finally boot on real hardware, the davinci and imx31 get the DT support working better for some of the machines that are still normally used with classic board files. One tegra fix is important for new bootloader versions, but the bug has been around for a while without anyone noticing. The other changes are mostly cosmetic" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits) arm64: tegra: Add missing Smaug revision arm64: tegra: Add VDD_GPU regulator to Jetson TX1 arm64: dts: zte: clean up gic-v3 redistributor properties arm64: dts: zx: Fix gic GICR property bus: vexpress-config: fix device reference leak soc: ti: qmss: fix the case when !SMP ARM: lpc32xx: drop duplicate header device.h ARM: ixp4xx: drop duplicate header gpio.h ARM: socfpga: fix spelling mistake in error message ARM: dts: imx6q-cm-fx6: fix fec pinctrl ARM: dts: imx7d-pinfunc: fix UART pinmux defines ARM: dts: imx6qp: correct LDB clock inputs ARM: OMAP2+: pm-debug: Use seq_putc() in two functions ARM: OMAP2+: Remove the omapdss_early_init_of() function mfd: tps65217: Fix mismatched interrupt number ARM: zx: Fix error handling ARM: spear: Fix error handling ARM: davinci: da850: Fix pwm name matching ARM: clk: imx31: properly init clocks for machines with DT clk: imx31: fix rewritten input argument of mx31_clocks_init() ...
2016-12-13Merge tag 'clk-for-linus' of ↵Linus Torvalds2-0/+97
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This is a fairly quiet release. We don't have any patches to the core framework. The only patch that can even be considered "core" adds another clk_get() variant. The rest of the changes are in drivers for various SoCs, and we have a few bits for ARM shmobile architecture code (dts and mach) due to the dependency we're breaking between shmobile architecture code and its clk driver. Those shmobile bits have also been pulled into arm-soc tree. Here's the summary: Core: - Support for devm_get_clk_from_child() used with DT bindings that have subnodes with the 'clocks' property New Drivers: - Allwinner A64 (sun50i) - i.MX imx6ull - Socionext's UniPhier SoC CPUs - Mediatek MT2701 SoCs - Rockchip rk1108 SoCs - Qualcomm MSM8994/MSM8992 SoCS - Qualcomm RPM Clocks - Hisilicon Hi3516CV300 and Hi3798CV200 CRG - Oxford Semiconductor OX820 and OX810SE SoCs - Renesas RZ/G1M and RZ/GIE SoCs - Renesas R-Car RST driver for mode pin states Updates: - Four Allwinner SoCs are migrated to the new style clk driver - Rockchip rk3399,rk3066 PLL optimizations - i.MX LVDS display glitch fixes and AV PLL precision improvements - Qualcomm MSM8996 GPU GDSCs, hw controlled GDSCs, and Alpha PLL support - Explicit demodularization of always builtin drivers - Freescale Qoriq ls1012a and ls1046a support - Exynos 5433 parent typo fix and critical clock tagging - Renesas r8a7743/r8a7745 CPG - Renesas R-Car M3-W CSI2/VIN/SYS-DMAC/(H)SCIF/I2C/DRIF/gfx support - stm32f4* LSI, LSE, RTC, and QSPI clocks - pxa27x and pxa25x cpufreq as clks - TI omap36xx sprz319 advisory 2.1 workaround - Broadcom bcm2835 rate change propogation to PLLH_AUX from VEC" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits) clk: bcm: Fix 'maybe-uninitialized' warning in bcm2835_clock_choose_div_and_prate() clk: add devm_get_clk_from_child() API clk: st: clk-flexgen: Unmap region obtained by of_iomap clk: keystone: pll: Unmap region obtained by of_iomap clk:mmp:clk-of-mmp2: Free memory and Unmap region obtained by kzalloc and of_iomap clk:mmp:clk-of-pxa910: Free memory and Unmap region obtained by kzmalloc and of_iomap clk: mmp: clk-of-pxa1928: Free memory obtained by kzalloc clk: cdce925: Fix limit check clk: bcm: Make COMMON_CLK_IPROC into a library clk: qoriq: added ls1012a clock configuration clk: ti: dra7: fix "failed to lookup clock node gmac_gmii_ref_clk_div" boot message clk: bcm: Allow rate change propagation to PLLH_AUX on VEC clock clk: bcm: Support rate change propagation on bcm2835 clocks clk: bcm2835: Avoid overwriting the div info when disabling a pll_div clk clk: ti: omap36xx: Work around sprz319 advisory 2.1 clk: clk-wm831x: fix a logic error clk: uniphier: add cpufreq data for LD11, LD20 SoCs clk: uniphier: add CPU-gear change (cpufreq) support clk: qcom: Put venus core0/1 gdscs to hw control mode clk: qcom: gdsc: Add support for gdscs with HW control ...
2016-12-13Merge tag 'mmc-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds4-2/+259
Pull MMC updates from Ulf Hansson: "It's been an busy period for mmc. Quite some changes in the mmc core, two new mmc host drivers, some existing drivers being extended to support new IP versions and lots of other updates. MMC core: - Delete eMMC packed command support - Introduce mmc_abort_tuning() to enable eMMC tuning to fail gracefully - Introduce mmc_can_retune() to see if a host can be retuned - Re-work and improve the sequence when sending a CMD6 for mmc - Enable CDM13 polling when switching to HS and HS DDR mode for mmc - Relax checking for CMD6 errors after switch to HS200 - Re-factoring the code dealing with the mmc block queue - Recognize whether the eMMC card supports CMDQ - Fix 4K native sector check - Don't power off the card when starting the host - Increase MMC_IOC_MAX_BYTES to support bigger firmware binaries - Improve error handling and drop meaningless BUG_ONs() - Lots of clean-ups and changes to improve the quality of the code MMC host: - sdhci: Fix tuning sequence and clean-up the related code - sdhci: Add support to via DT override broken SDHCI cap register bits - sdhci-cadence: Add new driver for Cadence SD4HC SDHCI variant - sdhci-msm: Update clock management - sdhci-msm: Add support for eMMC HS400 mode - sdhci-msm: Deploy runtime/system PM support - sdhci-iproc: Extend driver support to newer IP versions - sdhci-pci: Add support for Intel GLK - sdhci-pci: Add support for Intel NI byt sdio - sdhci-acpi: Add support for 80860F14 UID 2 SDIO bus - sdhci: Lots of various small improvements and clean-ups - tmio: Add support for tuning - sh_mobile_sdhi: Add support for tuning - sh_mobile_sdhi: Extend driver to support SDHI IP on R7S72100 SoC - sh_mobile_sdhi: remove support for sh7372 - davinci: Use mmc_of_parse() to enable generic mmc DT bindings - meson: Add new driver to support GX platforms - dw_mmc: Deploy generic runtime/system PM support - dw_mmc: Lots of various small improvements As a part of the mmc changes this time, I have also pulled in an immutable branch/tag (soc-device-match-tag1) hosted by Geert Uytterhoeven, to share the implementation of the new soc_device_match() interface. This is needed by these mmc related changes: - mmc: sdhci-of-esdhc: Get correct IP version for T4240-R1.0-R2.0 - soc: fsl: add GUTS driver for QorIQ platforms" * tag 'mmc-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (136 commits) mmc: sdhci-cadence: add Cadence SD4HC support mmc: sdhci: export sdhci_execute_tuning() mmc: sdhci: Tidy tuning loop mmc: sdhci: Simplify tuning block size logic mmc: sdhci: Factor out tuning helper functions mmc: sdhci: Use mmc_abort_tuning() mmc: mmc: Introduce mmc_abort_tuning() mmc: sdhci: Always allow tuning to fall back to fixed sampling mmc: sdhci: Fix tuning reset after exhausting the maximum number of loops mmc: sdhci: Fix recovery from tuning timeout Revert "mmc: sdhci: Reset cmd and data circuits after tuning failure" mmc: mmc: Relax checking for switch errors after HS200 switch mmc: sdhci-acpi: support 80860F14 UID 2 SDIO bus mmc: sdhci-of-at91: remove bogus MMC_SDHCI_IO_ACCESSORS select mmc: sdhci-pci: Use ACPI to get max frequency for Intel NI byt sdio mmc: sdhci-pci: Add PCI ID for Intel NI byt sdio mmc: sdhci-s3c: add spin_unlock_irq() before calling clk_round_rate mmc: dw_mmc: display the clock message only one time when card is polling mmc: dw_mmc: add the debug message for polling and non-removable mmc: dw_mmc: check the "present" variable before checking flags ...
2016-12-10soc/fsl/qman: test: use DEFINE_SPINLOCK()Fabian Frederick1-1/+1
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Scott Wood <oss@buserror.net>
2016-12-05soc/fsl/bman: Use resource_size instead of computationWei Yongjun1-2/+1
Use resource_size function on resource object instead of explicit computation. Generated by: scripts/coccinelle/api/resource_size.cocci Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-12-05soc/fsl/qe: use builtin_platform_driverGeliang Tang1-5/+1
Use builtin_platform_driver() helper to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-12-02soc/fsl/qbman: Convert to hotplug state machineSebastian Andrzej Siewior1-27/+12
Install the callbacks via the state machine. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Scott Wood <oss@buserror.net> Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: rt@linutronix.de Cc: Roy Pledge <roy.pledge@nxp.com> Link: http://lkml.kernel.org/r/20161126231350.10321-21-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-02soc/fsl/qbman: Convert to hotplug state machineSebastian Andrzej Siewior1-30/+16
Install the callbacks via the state machine. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Scott Wood <oss@buserror.net> Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: rt@linutronix.de Cc: Roy Pledge <roy.pledge@nxp.com> Link: http://lkml.kernel.org/r/20161126231350.10321-20-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-01soc: ti: qmss: fix the case when !SMPGrygorii Strashko1-1/+1
The irq_set_affinity_hint() will always fail when !SMP and Networking will fail on Keystone 2 devices in this case. Hence, fix by ignoring IRQ affinity settings when !SMP. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-30Merge tag 'renesas-soc-match-for-v4.10' of ↵Arnd Bergmann2-0/+259
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers Merge "Renesas ARM Based SoC Match Updates for v4.10" from Simon Horman: * Identify SoC and register with the SoC bus * tag 'renesas-soc-match-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: Identify SoC and register with the SoC bus ARM: shmobile: Document DT bindings for Product Register Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-30Merge tag 'renesas-r8a7745-sysc-for-v4.10' of ↵Arnd Bergmann4-0/+37
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers Pull "Renesas ARM Based SoC r8a7745 SYSC Driver Updates for v4.10" from Simon Horman: * Add support for the r8a7745 SoC to rcar-sysc * tag 'renesas-r8a7745-sysc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: rcar-sysc: add R8A7745 support ARM: shmobile: r8a7745: add power domain index macros Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-29soc: fsl: fix section mismatch build warningsSudeep Holla1-2/+5
We get the following warning with the driver is compiled in: WARNING: modpost: Found 1 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' With CONFIG_DEBUG_SECTION_MISMATCH enabled, the details are reported: WARNING: vmlinux.o(.text+0x55d014): Section mismatch in reference from the function fsl_guts_probe() to the function .init.text:of_flat_dt_get_machine_name() The function fsl_guts_probe() references the function __init of_flat_dt_get_machine_name(). This is often because fsl_guts_probe lacks a __init annotation or the annotation of of_flat_dt_get_machine_name is wrong. This patch fixes the issue by using the normal DT/OF API rather than the of_flat_* one. Cc: Scott Wood <oss@buserror.net> Cc: Yangbo Lu <yangbo.lu@nxp.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29soc: fsl: add GUTS driver for QorIQ platformsyangbo lu4-2/+256
The global utilities block controls power management, I/O device enabling, power-onreset(POR) configuration monitoring, alternate function selection for multiplexed signals,and clock control. This patch adds a driver to manage and access global utilities block. Initially only reading SVR and registering soc device are supported. Other guts accesses, such as reading RCW, should eventually be moved into this driver as well. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-24soc/qman: Handle endianness of h/w descriptorsClaudiu Manoil4-39/+45
The hardware descriptors have big endian (BE) format. Provide proper endianness handling for the remaining descriptor fields, to ensure they are correctly accessed by non-BE CPUs too. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-11-23soc: renesas: Identify SoC and register with the SoC busGeert Uytterhoeven2-0/+259
Identify the SoC type and revision, and register this information with the SoC bus, so it is available under /sys/devices/soc0/, and can be checked where needed using soc_device_match(). Identification is done using the Product Register or Common Chip Code Register, as declared in DT (PRR only for now), or using a hardcoded fallback if missing. Example: Detected Renesas R-Car Gen2 r8a7791 ES1.0 ... # cat /sys/devices/soc0/{machine,family,soc_id,revision} Koelsch R-Car Gen2 r8a7791 ES1.0 Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>