summaryrefslogtreecommitdiff
path: root/drivers/spi/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2022-05-26Merge tag 'arm-multiplatform-5.19-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARMv4T/v5 multiplatform support from Arnd Bergmann: "This series has been 12 years in the making, it mostly finishes the work that was started with the founding of Linaro to clean up platform support in the kernel. The largest change here is a cleanup of the omap1 platform, which is the final ARM machine type to get converted to the common-clk subsystem. All the omap1 specific drivers are now made independent of the mach/*.h headers to allow the platform to be part of a generic ARMv4/v5 multiplatform kernel. The last bit that enables this support is still missing here while we wait for some last dependencies to make it into the mainline kernel through other subsystems. The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost at the point of allowing multiplatform kernels, this work gets completed here along with a few additional cleanup. At the same time, the s3c24xx and s3c64xx are now deprecated and expected to get removed in the future. The PXA and OMAP1 bits are in a separate branch because of dependencies. Once both branches are merged, only the three Intel StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels, and there are no plans to include these" * tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits) ARM: ixp4xx: Consolidate Kconfig fixing issue ARM: versatile: Add missing of_node_put in dcscb_init ARM: config: Refresh IXP4xx config after multiplatform ARM: omap1: add back omap_set_dma_priority() stub ARM: omap: fix missing declaration warnings ARM: omap: fix address space warnings from sparse ARM: spear: remove include/mach/ subdirectory ARM: davinci: remove include/mach/ subdirectory ARM: omap2: remove include/mach/ subdirectory integrator: remove empty ap_init_early() ARM: s3c: fix include path MAINTAINERS: omap1: Add Janusz as an additional maintainer ARM: omap1: htc_herald: fix typos in comments ARM: OMAP1: fix typos in comments ARM: OMAP1: clock: Remove noop code ARM: OMAP1: clock: Remove unused code ARM: OMAP1: clock: Fix UART rate reporting algorithm ARM: OMAP1: clock: Fix early UART rate issues ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF ARM: omap1: fix build with no SoC selected ...
2022-05-16spi: spi-mem: Convert Aspeed SMC driver to spi-memCédric Le Goater1-0/+11
This SPI driver adds support for the Aspeed static memory controllers of the AST2600, AST2500 and AST2400 SoCs using the spi-mem interface. * AST2600 Firmware SPI Memory Controller (FMC) . BMC firmware . 3 chip select pins (CE0 ~ CE2) . Only supports SPI type flash memory . different segment register interface . single, dual and quad mode. * AST2600 SPI Flash Controller (SPI1 and SPI2) . host firmware . 2 chip select pins (CE0 ~ CE1) . different segment register interface . single, dual and quad mode. * AST2500 Firmware SPI Memory Controller (FMC) . BMC firmware . 3 chip select pins (CE0 ~ CE2) . supports SPI type flash memory (CE0-CE1) . CE2 can be of NOR type flash but this is not supported by the driver . single, dual mode. * AST2500 SPI Flash Controller (SPI1 and SPI2) . host firmware . 2 chip select pins (CE0 ~ CE1) . single, dual mode. * AST2400 New Static Memory Controller (also referred as FMC) . BMC firmware . New register set . 5 chip select pins (CE0 ∼ CE4) . supports NOR flash, NAND flash and SPI flash memory. . single, dual and quad mode. Each controller has a memory range on which flash devices contents are mapped. Each device is assigned a window that can be changed at bootime with the Segment Address Registers. Each SPI flash device can then be accessed in two modes: Command and User. When in User mode, SPI transfers are initiated with accesses to the memory segment of a device. When in Command mode, memory operations on the memory segment of a device generate SPI commands automatically using a Control Register for the settings. This initial patch adds support for User mode. Command mode needs a little more work to check that the memory window on the AHB bus fits the device size. It will come later when support for direct mapping is added. Single and dual mode RX transfers are supported. Other types than SPI are not supported. Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Tao Ren <rentao.bupt@gmail.com> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220509175616.1089346-4-clg@kaod.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-09spi: spi-imx: replace struct spi_imx_data::bitbang by pointer to struct ↵Marc Kleine-Budde1-1/+0
spi_controller There's no need to embed the struct spi_bitbang into our private data (struct spi_imx_data), the spi core is flexible enough, so that we only need a pointer to the allocated struct spi_controller. This is also a preparation patch to add PIO based polling support to the driver. Co-developed-by: David Jander <david@protonic.nl> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20220502175457.1977983-8-mkl@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-27spi: add driver for MTK SPI NAND Flash InterfaceChuanhong Guo1-0/+10
This driver implements support for the SPI-NAND mode of MTK NAND Flash Interface as a SPI-MEM controller with pipelined ECC capability. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/20220424032527.673605-3-gch981213@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-25spi: ingenic: Add support for new Ingenic SoCs.周琰杰 (Zhou Yanjie)1-2/+2
1.Since it would be dangerous to specify a newer SoC's compatible string as the fallback of an older SoC's compatible string, we add support for the "ingenic,jz4775-spi" compatible string in the driver. This will permit to support the JZ4775 by having: compatible = "ingenic,jz4775-spi"; Instead of doing: compatible = "ingenic,jz4775-spi", "ingenic,jz4780-spi"; 2.Add support for probing the spi-ingenic driver on the X1000 SoC from Ingenic. From the X1000 SoC onwards, the maximum frequency allowed by the SSI module of Ingenic SoCs has been changed from 54MHz to 50MHz. So "max_speed_hz" is introduced in "jz_soc_info" to set different maximum frequency values. 3.Add support for probing the spi-ingenic driver on the X2000 SoC from Ingenic. The X2000 SoC has only one native chip select line, so "max_native_cs" is introduced in "jz_soc_info" to set different maximum number of native chip select lines. 4.Because of the introduction of support for the X-series SoCs, the current driver is not only applicable to the JZ-series SoCs, so the description texts has been modified to avoid misunderstanding. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/1650724725-93758-4-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-21ARM: omap1: move perseus spi pinconf to board fileArnd Bergmann1-1/+1
The driver has always had a FIXME about this, and it seems like this trivial code move avoids a mach header inclusion, so just do it. With that out of the way, and the header file inclusions changed to global files, the driver can also be compile-tested on other platforms. Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-25Merge tag 'mtd/changes-for-5.18' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "There has been a lot of activity in the MTD subsystem recently, with a number of SPI-NOR cleanups as well as the introduction of ECC engines that can be used by SPI controllers (hence a few SPI patches in here). Core MTD changes: - Replace the expert mode symbols with a single helper - Fix misuses of of_match_ptr() - Remove partid and partname debugfs files - tests: Fix eraseblock read speed miscalculation for lower partition sizes - TRX parser: Allow to use on MediaTek MIPS SoCs MTD driver changes: - spear_smi: use GFP_KERNEL - mchp48l640: Add SPI ID table - mchp23k256: Add SPI ID table - blkdevs: Avoid soft lockups with some mtd/spi devices - aspeed-smc: Improve probe resilience Hyperbus changes: - HBMC_AM654 should depend on ARCH_K3 NAND core changes: - ECC: - Add infrastructure to support hardware engines - Add a new helper to retrieve the ECC context - Provide a helper to retrieve a pilelined engine device NAND-ECC changes: - Macronix ECC engine: - Add Macronix external ECC engine support - Support SPI pipelined mode - Make two read-only arrays static const - Fix compile test issue Raw NAND core changes: - Fix misuses of of_match_node() - Rework of_get_nand_bus_width() - Remove of_get_nand_on_flash_bbt() wrapper - Protect access to rawnand devices while in suspend - bindings: Document the wp-gpios property Rax NAND controller driver changes: - atmel: Fix refcount issue in atmel_nand_controller_init - nandsim: - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern - Merge repeat codes in ns_switch_state - Replace overflow check with kzalloc to single kcalloc - rockchip: Fix platform_get_irq.cocci warning - stm32_fmc2: Add NAND Write Protect support - pl353: Set the nand chip node as the flash node - brcmnand: Fix sparse warnings in bcma_nand - omap_elm: Remove redundant variable 'errors' - gpmi: - Support fast edo timings for mx28 - Validate controller clock rate - Fix controller timings setting - brcmnand: - Add BCMA shim - BCMA controller uses command shift of 0 - Allow platform data instantation - Add platform data structure for BCMA - Allow working without interrupts - Move OF operations out of brcmnand_init_cs() - Avoid pdev in brcmnand_init_cs() - Allow SoC to provide I/O operations - Assign soc as early as possible Onenand changes: - Check for error irq SPI-NAND core changes: - Delay a little bit the dirmap creation - Create direct mapping descriptors for ECC operations SPI-NAND driver changes: - macronix: Use random program load SPI NOR core changes: - Move vendor specific code out of the core into vendor drivers. - Unify all function and object names in the vendor modules. - Make setup() callback optional to improve readability. - Skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash declaration. SPI changes: - Macronix SPI controller: - Fix the transmit path - Create a helper to configure the controller before an operation - Create a helper to ease the start of an operation - Add support for direct mapping - Add support for pipelined ECC operations - spi-mem: - Introduce a capability structure - Check the controller extra capabilities - cadence-quadspi/mxic: Provide capability structures - Kill the spi_mem_dtr_supports_op() helper - Add an ecc parameter to the spi_mem_op structure Binding changes: - Dropped mtd/cortina,gemini-flash.txt - Convert BCM47xx partitions to json-schema - Vendor prefixes: Clarify Macronix prefix - SPI NAND: Convert spi-nand description file to yaml - Raw NAND chip: Create a NAND chip description - Raw NAND controller: - Harmonize the property types - Fix a comment in the examples - Fix the reg property description - Describe Macronix NAND ECC engine - Macronix SPI controller: - Document the nand-ecc-engine property - Convert to yaml - The interrupt property is not mandatory" * tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (104 commits) mtd: nand: ecc: mxic: Fix compile test issue mtd: nand: mxic-ecc: make two read-only arrays static const mtd: hyperbus: HBMC_AM654 should depend on ARCH_K3 mtd: core: Remove partid and partname debugfs files dt-bindings: mtd: partitions: convert BCM47xx to the json-schema mtd: tests: Fix eraseblock read speed miscalculation for lower partition sizes mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init mtd: rawnand: rockchip: fix platform_get_irq.cocci warning mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set mtd: spi-nor: renumber flags mtd: spi-nor: slightly change code style in spi_nor_sr_ready() mtd: spi-nor: spansion: rename vendor specific functions and defines mtd: spi-nor: spansion: convert USE_CLSR to a manufacturer flag mtd: spi-nor: move all spansion specifics into spansion.c mtd: spi-nor: spansion: slightly rework control flow in late_init() mtd: spi-nor: micron-st: rename vendor specific functions and defines mtd: spi-nor: micron-st: convert USE_FSR to a manufacturer flag mtd: spi-nor: move all micron-st specifics into micron-st.c mtd: spi-nor: xilinx: correct the debug message mtd: spi-nor: xilinx: rename vendor specific functions and defines ...
2022-02-15mtd: spi-nor / spi / MFD: Convert intel-spi to SPI MEMMark Brown1-0/+39
Merge series from Mika Westerberg <mika.westerberg@linux.intel.com>: Based on discussion on the patch I sent some time ago here: http://lists.infradead.org/pipermail/linux-mtd/2021-June/086867.html it turns out that the preferred way to deal with the SPI flash controller drivers is through SPI MEM which is part of Linux SPI subsystem. This series does that for the intel-spi driver. This also renames the driver to follow the convention used in the SPI subsystem. The first patch improves the write protection handling to be slightly more safer. The following two patches do the conversion itself. Note the Intel SPI flash controller only allows commands such as read, write and so on and it internally uses whatever addressing etc. it figured from the SFDP on the flash device. base-commit: e783362eb54cd99b2cac8b3a9aeac942e6f6ac07
2022-02-14mtd: spi-nor: intel-spi: Convert to SPI MEMMika Westerberg1-0/+39
The preferred way to implement SPI-NOR controller drivers is through SPI subsubsystem utilizing the SPI MEM core functions. This converts the Intel SPI flash controller driver over the SPI MEM by moving the driver from SPI-NOR subsystem to SPI subsystem and in one go make it use the SPI MEM functions. The driver name will be changed from intel-spi to spi-intel to match the convention used in the SPI subsystem. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mauro Lima <mauro.lima@eclypsium.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220209122706.42439-3-mika.westerberg@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-10spi: mxic: Add support for pipelined ECC operationsMiquel Raynal1-0/+1
Some SPI-NAND chips do not have a proper on-die ECC engine providing error correction/detection. This is particularly an issue on embedded devices with limited resources because all the computations must happen in software, unless an external hardware engine is provided. These external engines are new and can be of two categories: external or pipelined. Macronix is providing both, the former being already supported. The second, however, is very SoC implementation dependent and must be instantiated by the SPI host controller directly. An entire subsystem has been contributed to support these engines which makes the insertion into another subsystem such as SPI quite straightforward without the need for a lot of specific functions. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/linux-mtd/20220202144536.393792-1-miquel.raynal@bootlin.com
2022-01-25spi: Add spi driver for Sunplus SP7021Li-hao Kuo1-0/+11
Add spi driver for Sunplus SP7021. Signed-off-by: Li-hao Kuo <lhjeff911@gmail.com> Link: https://lore.kernel.org/r/37998e515d561e762ee30d0ac4fca25a948e0c5c.1642494310.git.lhjeff911@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-15spi: xlp: Remove Netlogic XLP variantsRob Herring1-6/+5
Netlogic XLP was removed in commit 95b8a5e0111a ("MIPS: Remove NETLOGIC support"). With those gone, the single platform left to support is Cavium ThunderX2. Remove the Netlogic variant and DT support. For simplicity, the existing kconfig name is retained. Cc: Mark Brown <broonie@kernel.org> Cc: linux-spi@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211109161325.2203564-1-robh@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-27Merge series "add support for Cadence's XSPI controller" from Parshuram ↵Mark Brown1-0/+12
Thombare <pthombar@cadence.com>: This patch series adds support for Cadence's XSPI controller. It supports 3 work modes. 1. ACMD (auto command) work mode ACMD name is because it uses auto command engine in the controller. It further has 2 modes PIO and CDMA (command DMA). The CDMA work mode is dedicated for high-performance application where very low software overhead is required. In this mode the Command Engine is programmed by the series of linked descriptors stored in system memory. These descriptors provide commands to execute and store status information for finished commands. The PIO mode work mode is dedicated for single operation where constructing a linked list of descriptors would require too much effort. 2. STIG (Software Triggered Instruction Generator) work mode In STIG mode, controller sends low-level instructions to memory. Each instruction is 128-bit width. There is special instruction DataSequence which carries information about data phase. Driver uses Slave DMA interface to transfer data as only this interface can be used in STIG work mode. 3. Direct work mode This work mode allows sending data without invoking any command through the slave interface. Currently only STIG work mode is enabled, remaining work modes will be added later. Changes since v5: 1. Added adjust_op_size to adjust op size according to sdma size. Changes since v4: 1. Changed reg region names and lengths as suggested by Rob. Changes since v3: 1. Removed ACMD PIO mode. 2. Return IRQ_HANDLED only for handled interrupts. 3. DT binding changes. Changes since v2: 1. Removed extra lock around exec_op. 2. Removed PHY parameters setting from the driver, those will be handled by bootstrap pins available in the controller. Changes since v1: 1. Use ACMD PIO work mode for NOR read, program and erase operations, for everything else use STIG(Software Triggered Instruction Generator) work mode. 2. Changes suggested by Lukas. Parshuram Thombare (2): spi: cadence: add dt-bindings documentation for Cadence XSPI controller spi: cadence: add support for Cadence XSPI controller .../devicetree/bindings/spi/cdns,xspi.yaml | 77 +++ drivers/spi/Kconfig | 12 + drivers/spi/Makefile | 1 + drivers/spi/spi-cadence-xspi.c | 640 +++++++++++++++++++++ 4 files changed, 730 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/cdns,xspi.yaml create mode 100644 drivers/spi/spi-cadence-xspi.c -- 2.7.4
2021-09-27spi: s3c64xx: describe driver in KConfigKrzysztof Kozlowski1-2/+3
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210924133114.111777-1-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-27spi: cadence: add support for Cadence XSPI controllerParshuram Thombare1-0/+12
This patch adds driver for Cadence's XSPI controller. It supports 3 work modes. 1. ACMD (auto command) work mode ACMD name is because it uses auto command engine in the controller. It further has 2 modes PIO and CDMA (command DMA). The CDMA work mode is dedicated for high-performance application where very low software overhead is required. In this mode the Command Engine is programmed by the series of linked descriptors stored in system memory. These descriptors provide commands to execute and store status information for finished commands. The PIO mode work mode is dedicated for single operation where constructing a linked list of descriptors would require too much effort. 2. STIG (Software Triggered Instruction Generator) work mode In STIG mode, controller sends low-level instructions to memory. Each instruction is 128-bit width. There is special instruction DataSequence which carries information about data phase. Driver uses Slave DMA interface to transfer data as only this interface can be used in STIG work mode. 3. Direct work mode This work mode allows sending data without invoking any command through the slave interface. Currently only STIG work mode is enabled, remaining work modes will be added later. Signed-off-by: Konrad Kociolek <konrad@cadence.com> Signed-off-by: Jayshri Pawar <jpawar@cadence.com> Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Acked-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/1632038734-23999-1-git-send-email-pthombar@cadence.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13SPI: add Ingenic JZ47xx driver.Artur Rojek1-0/+9
Add a driver to support the SPI controller found in Ingenic SoCs. Co-developed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Link: https://lore.kernel.org/r/20210830230139.21476-3-contact@artur-rojek.eu Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-17spi: rockchip-sfc: add rockchip serial flash controllerChris Morgan1-0/+12
Add the rockchip serial flash controller (SFC) driver. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20210812134546.31340-3-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-04spi: stm32-qspi: Fix W=1 build warningPatrice Chotard1-0/+1
Fix the following compilation warning using W=1 build: arm-linux-gnueabi-ld: drivers/spi/spi-stm32-qspi.o: in function `stm32_qspi_poll_status': Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210604075009.25914-1-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-28spi: altera: Make SPI_ALTERA_CORE invisibleGeert Uytterhoeven1-1/+1
The SPI_ALTERA_CORE config symbol controls compilation of the Altera SPI Controller core code. It is already selected by all of its users, so there is no reason to make it visible, unless compile-testing. Fixes: b0c3d9354de1f87e ("spi: altera: separate core code from platform code") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/f0cb8e66baba4506db6f42fca74dc51b76883507.1619534253.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20spi: altera: Add DFL bus driver for Altera API ControllerMatthew Gerlach1-0/+9
This patch adds a Device Feature List (DFL) bus driver for the Altera SPI Master controller. The SPI master is connected to an Intel SPI Slave to Avalon Bridge inside an Intel MAX10 BMC Chip. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Link: https://lore.kernel.org/r/20210416165720.554144-3-matthew.gerlach@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20spi: altera: separate core code from platform codeMatthew Gerlach1-1/+8
In preparation of adding support for a new bus type, separate the core spi-altera code from the platform driver code. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Link: https://lore.kernel.org/r/20210416165720.554144-2-matthew.gerlach@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-31spi: Add HiSilicon SPI Controller Driver for Kunpeng SoCsJay Fang1-0/+10
This driver supports SPI Controller for HiSilicon Kunpeng SoCs. This driver supports SPI operations using FIFO mode of transfer. DMA is not supported, and we just use IRQ mode for operation completion notification. Only ACPI firmware is supported. Signed-off-by: Jay Fang <f.fangjian@huawei.com> Link: https://lore.kernel.org/r/1616836200-45827-1-git-send-email-f.fangjian@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-22Merge tag 'spi-v5.12' of ↵Linus Torvalds1-22/+11
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The main focus of this release from a framework point of view has been spi-mem where we've acquired support for a few new hardware features which enable better performance on suitable hardware. Otherwise mostly thanks to Arnd's cleanup efforts on old platforms we've removed several obsolete drivers which just about balance out the newer drivers we've added this cycle. Summary: - Allow drivers to flag if they are unidirectional. - Support for DTR mode and hardware acceleration of dummy cycles in spi-mem. - Support for Allwinder H616, Intel Lightning Mountain, nVidia Tegra QuadSPI, Realtek RTL838x and RTL839x. - Removal of obsolete EFM32, Txx9 and SIRF Prima and Atlas drivers" * tag 'spi-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (76 commits) spi: Skip zero-length transfers in spi_transfer_one_message() spi: dw: Avoid stack content exposure spi: cadence-quadspi: Use spi_mem_dtr_supports_op() spi: spi-mem: add spi_mem_dtr_supports_op() spi: atmel-quadspi: Disable the QSPI IP at suspend() spi: pxa2xx: Add IDs for the controllers found on Intel Lynxpoint spi: pxa2xx: Fix the controller numbering for Wildcat Point spi: Change provied to provided in the file spi.h spi: mediatek: add set_cs_timing support spi: support CS timing for HW & SW mode spi: add power control when set_cs_timing spi: stm32: make spurious and overrun interrupts visible spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC spi: stm32: defer probe for reset spi: stm32: driver uses reset controller only at init spi: stm32h7: ensure message are smaller than max size spi: stm32: use bitfield macros spi: stm32: do not mandate cs_gpio spi: stm32: properly handle 0 byte transfer spi: clps711xx: remove redundant white-space ...
2021-01-21spi: remove sirf prima/atlas driverArnd Bergmann1-7/+0
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Link: https://lore.kernel.org/r/20210120161658.3820610-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-20ARM: remove u300 platformArnd Bergmann1-1/+0
The Ericsson U300 platform was one of two ARM929 based SoC platforms for mobile phones in ST-Ericsson after the merger of Ericsson with ST-NXP into ST-Ericsson, the other one being the ST Nomadik. The platform was not widely adopted in Linux based systems and was replaced with the far superior ST-Ericsson U8500 in 2011, but Linus Walleij kept maintaining the code for the whole time. Linus continues to use the Nomadik machine, but decided to drop u300 from the kernel as part of this year's spring cleaning. Thanks for having maintained it all these years. Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/lkml/CACRpkdbJkiHR9FSfJTH_5d_qRU1__dRXHM1TL40iqNRKbGQfrQ@mail.gmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-15Merge series "Remove ARM platform efm32" from Uwe Kleine-König ↵Mark Brown1-7/+0
<u.kleine-koenig@pengutronix.de> Uwe Kleine-König <uwe.kleine-koenig@pengutronix.de>: From: Uwe Kleine-König <uwe.kleine-koenig@pengutronix.de> Hello, there are no known active users of the efm32 platform. Given that the only machine that is supported has only 4 MiB of RAM its use is also quite limited. Back then it served as the platform to develop ARMv7-M support in Linux which was quite fun and still is a blissful memory. Still given that the code serves no purpose and this probably won't change anytime soon, remove all platform support. I'm unsure what to do with the device tree bindings. Should we delete them, too? Best regards Uwe Uwe Kleine-König (7): ARM: drop efm32 platform clk: Drop unused efm32gg driver clocksource: Drop unused efm32 timer code spi: Drop unused efm32 bus driver i2c: Drop unused efm32 bus driver tty: Drop unused efm32 serial driver MAINTAINERS: Remove deleted platform efm32 MAINTAINERS | 7 - arch/arm/Kconfig | 10 +- arch/arm/Kconfig.debug | 17 - arch/arm/Makefile | 1 - arch/arm/boot/dts/Makefile | 2 - arch/arm/boot/dts/efm32gg-dk3750.dts | 88 --- arch/arm/boot/dts/efm32gg.dtsi | 177 ----- arch/arm/configs/efm32_defconfig | 98 --- arch/arm/include/debug/efm32.S | 45 -- arch/arm/mach-efm32/Makefile | 2 - arch/arm/mach-efm32/Makefile.boot | 4 - arch/arm/mach-efm32/dtmachine.c | 16 - arch/arm/mm/Kconfig | 1 - drivers/clk/Makefile | 1 - drivers/clk/clk-efm32gg.c | 84 --- drivers/clocksource/Kconfig | 9 - drivers/clocksource/Makefile | 1 - drivers/clocksource/timer-efm32.c | 278 -------- drivers/i2c/busses/Kconfig | 7 - drivers/i2c/busses/Makefile | 1 - drivers/i2c/busses/i2c-efm32.c | 469 ------------- drivers/spi/Kconfig | 7 - drivers/spi/Makefile | 1 - drivers/spi/spi-efm32.c | 462 ------------ drivers/tty/serial/Kconfig | 13 - drivers/tty/serial/Makefile | 1 - drivers/tty/serial/efm32-uart.c | 852 ----------------------- include/linux/platform_data/efm32-spi.h | 15 - include/linux/platform_data/efm32-uart.h | 19 - include/uapi/linux/serial_core.h | 3 - 30 files changed, 1 insertion(+), 2690 deletions(-) delete mode 100644 arch/arm/boot/dts/efm32gg-dk3750.dts delete mode 100644 arch/arm/boot/dts/efm32gg.dtsi delete mode 100644 arch/arm/configs/efm32_defconfig delete mode 100644 arch/arm/include/debug/efm32.S delete mode 100644 arch/arm/mach-efm32/Makefile delete mode 100644 arch/arm/mach-efm32/Makefile.boot delete mode 100644 arch/arm/mach-efm32/dtmachine.c delete mode 100644 drivers/clk/clk-efm32gg.c delete mode 100644 drivers/clocksource/timer-efm32.c delete mode 100644 drivers/i2c/busses/i2c-efm32.c delete mode 100644 drivers/spi/spi-efm32.c delete mode 100644 drivers/tty/serial/efm32-uart.c delete mode 100644 include/linux/platform_data/efm32-spi.h delete mode 100644 include/linux/platform_data/efm32-uart.h base-commit: 5c8fe583cce542aa0b84adc939ce85293de36e5e -- 2.29.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2021-01-15spi: Drop unused efm32 bus driverUwe Kleine-König1-7/+0
Support for this machine was just removed, so drop the now unused spi bus driver, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210114151630.128830-5-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-13spi: cadence-quadspi: Add QSPI support for Intel LGM SoCRamuthevar Vadivel Murugan1-1/+1
Add QSPI controller support for Intel LGM SoC. Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Link: https://lore.kernel.org/r/20201124041840.31066-2-vadivel.muruganx.ramuthevar@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-06spi: tegra210-quad: Add support for Tegra210 QSPI controllerSowjanya Komatineni1-0/+9
Tegra SoC has a Quad SPI controller starting from Tegra210. This patch adds support for Tegra210 QSPI controller. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1608585459-17250-5-git-send-email-skomatineni@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-05spi: txx9: Remove driverThomas Bogendoerfer1-6/+0
CPU support for TX49xx is getting removed, so remove support SPI driver for it. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: https://lore.kernel.org/r/20210105140305.141401-5-tsbogend@alpha.franken.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04spi: renesas rpc-if: Update Add RZ/G2 to Kconfig descriptionAdam Ford1-1/+1
The SPI driver for the Renesas RPC-IF is present on the RZ/G2 Series. Add that to the description. Suggested-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210102115412.3402059-3-aford173@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-27spi: dw-bt1: Fix undefined devm_mux_control_get symbolSerge Semin1-2/+2
I mistakenly added the select attributes to the SPI_DW_BT1_DIRMAP config instead of having them defined in SPI_DW_BT1. If the kernel doesn't have the MULTIPLEXER and MUX_MMIO configs manually enabled and the SPI_DW_BT1_DIRMAP config hasn't been selected, Baikal-T1 SPI device will always fail to be probed by the driver. Fix that and the error reported by the test robot: >> ld.lld: error: undefined symbol: devm_mux_control_get >>> referenced by spi-dw-bt1.c >>> spi/spi-dw-bt1.o:(dw_spi_bt1_sys_init) in archive drivers/built-in.a by moving the MULTIPLEXER/MUX_MMIO configs selection to the SPI_DW_BT1 config. Link: https://lore.kernel.org/lkml/202011161745.uYRlekse-lkp@intel.com/ Link: https://lore.kernel.org/linux-spi/20201116040721.8001-1-rdunlap@infradead.org/ Fixes: abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201127144612.4204-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-1/+1
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-09spi: dw: Add Baikal-T1 SPI Controller glue driverSerge Semin1-0/+28
Baikal-T1 is equipped with three DW APB SSI-based MMIO SPI controllers. Two of them are pretty much normal: with IRQ, DMA, FIFOs of 64 words depth, 4x CSs, but the third one as being a part of the Baikal-T1 System Boot Controller has got a very limited resources: no IRQ, no DMA, only a single native chip-select and Tx/Rx FIFO with just 8 words depth available. In order to provide a transparent initial boot code execution the Boot SPI controller is also utilized by an vendor-specific IP-block, which exposes an SPI flash direct mapping interface. Since both direct mapping and SPI controller normal utilization are mutual exclusive only one of these interfaces can be used to access an external SPI slave device. That's why a dedicated mux is embedded into the System Boot Controller. All of that is taken into account in the Baikal-T1-specific DW APB SSI glue driver implemented by means of the DW SPI core module. Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201007235511.4935-22-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-09spi: dw: Add memory operations supportSerge Semin1-0/+1
Aside from the synchronous Tx-Rx mode, which has been utilized to create the normal SPI transfers in the framework of the DW SSI driver, DW SPI controller supports Tx-only and EEPROM-read modes. The former one just enables the controller to transmit all the data from the Tx FIFO ignoring anything retrieved from the MISO lane. The later mode is so called write-then-read operation: DW SPI controller first pushes out all the data from the Tx FIFO, after that it'll automatically receive as much data as has been specified by means of the CTRLR1 register. Both of those modes can be used to implement the memory operations supported by the SPI-memory subsystem. The memory operation implementation is pretty much straightforward, except a few peculiarities we have had to take into account to make things working. Since DW SPI controller doesn't provide a way to directly set and clear the native CS lane level, but instead automatically de-asserts it when a transfer going on, we have to make sure the Tx FIFO isn't empty during entire Tx procedure. In addition we also need to read data from the Rx FIFO as fast as possible to prevent it' overflow with automatically fetched incoming traffic. The denoted peculiarities get to cause even more problems if DW SSI controller is equipped with relatively small FIFO and is connected to a relatively slow system bus (APB) (with respect to the SPI bus speed). In order to workaround the problems for as much as it's possible, the memory operation execution procedure collects all the Tx data into a single buffer and disables the local IRQs to speed the write-then-optionally-read method up. Note the provided memory operations are utilized by default only if a glue driver hasn't provided a custom version of ones and this is not a DW APB SSI controller with fixed automatic CS toggle functionality. Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201007235511.4935-18-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-13Merge tag 'samsung-soc-s3c-5.10' of ↵Olof Johansson1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung S3C24xx and S3C64xx machine code cleanup for v5.10 Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it also touches files shared with S5Pv210 and Exynos. This is mostly Arnd Bergmann work which Krzysztof Kozlowski took over, rebased and polished. The goal is to cleanup, merge and finally make the Samsung S3C24xx and S3C64xx architectures multiplatform. The multiplatform did not happen yet here - just cleaning up and merging into one arch/arm/mach-s3c directory. However this is step forward for multiplatform or at least to keep this code still maintainable. This pulls also branch with changes for Samsung SoC sound drivers from broonie/sound because the cleanups there were part of this series and all further patches depend on them. * tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits) ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup ARM: s3c: Cleanup from old plat-samsung include ARM: s3c: make headers local if possible ARM: s3c: move into a common directory ARM: s3c24xx: stop including mach/hardware.h from mach/io.h cpufreq: s3c24xx: move low-level clk reg access into platform code cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh ARM: s3c: remove cpufreq header dependencies cpufreq: s3c24xx: split out registers fbdev: s3c2410fb: remove mach header dependency ARM: s3c24xx: bast: avoid irq_desc array usage ARM: s3c24xx: spi: avoid hardcoding fiq number in driver ARM: s3c24xx: include mach/irqs.h where needed ARM: s3c24xx: move s3cmci pinctrl handling into board files ARM: s3c24xx: move iis pinctrl config into boards ARM: s3c24xx: move spi fiq handler into platform ARM: s3c: adc: move header to linux/soc/samsung ARM: s3c24xx: move irqchip driver back into platform ARM: s3c24xx: move regs-spi.h into spi driver ARM: s3c64xx: remove mach/hardware.h ... Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-07spi: qup: Allow for compile-testing on !ARMAlex Dewar1-1/+1
There seems no reason to restrict testing to ARM, so remove this constraint to improve test coverage. Build-tested with allyesconfig on x86. Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Link: https://lore.kernel.org/r/20200904163709.110975-1-alex.dewar90@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-08-19ARM: s5pv210: don't imply CONFIG_PLAT_SAMSUNGArnd Bergmann1-1/+1
The plat-samsung directory and mach-s5pv210 can be build completely independently, so split the two Kconfig symbols CONFIG_PLAT_SAMSUNG and CONFIG_ARCH_S5PV210. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20200806182059.2431-18-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-08-03spi: Prevent adding devices below an unregistering controllerLukas Wunner1-0/+3
CONFIG_OF_DYNAMIC and CONFIG_ACPI allow adding SPI devices at runtime using a DeviceTree overlay or DSDT patch. CONFIG_SPI_SLAVE allows the same via sysfs. But there are no precautions to prevent adding a device below a controller that's being removed. Such a device is unusable and may not even be able to unbind cleanly as it becomes inaccessible once the controller has been torn down. E.g. it is then impossible to quiesce the device's interrupt. of_spi_notify() and acpi_spi_notify() do hold a ref on the controller, but otherwise run lockless against spi_unregister_controller(). Fix by holding the spi_add_lock in spi_unregister_controller() and bailing out of spi_add_device() if the controller has been unregistered concurrently. Fixes: ce79d54ae447 ("spi/of: Add OF notifier handler") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v3.19+ Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Link: https://lore.kernel.org/r/a8c3205088a969dc8410eec1eba9aface60f36af.1596451035.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22spi: lantiq: Add support to Lightning Mountain SoCDilip Kota1-2/+2
Add support to SPI controller on Intel Atom based Lightning Mountain SoC which reuses Lantiq SPI controller IP. Signed-off-by: Dilip Kota <eswara.kota@linux.intel.com> Link: https://lore.kernel.org/r/4d61a75381aca9479f9fc15d07a7b05534da6bb3.1594957019.git.eswara.kota@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: Fix SPI NOR and SPI NAND acronymsTudor Ambarus1-5/+5
The industry refers to these flash types as "SPI NOR" and "SPI NAND". Be consistent and use the same acronyms. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200716051144.568606-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-17spi: atmel-quadspi: Use optimezed memcpy_fromio()/memcpy_toio()Tudor Ambarus1-1/+1
Optimezed mem*io operations are defined for LE platforms, use them. The ARM and !ARCH_EBSA110 dependencies for COMPILE_TEST were added only for the _memcpy_fromio()/_memcpy_toio() functions. Drop these dependencies. Tested unaligned accesses on both sama5d2 and sam9x60 QSPI controllers using SPI NOR flashes, everything works ok. The following performance improvement can be seen when running mtd_speedtest: sama5d2_xplained (mx25l25635e) - before: mtd_speedtest: eraseblock write speed is 983 KiB/s mtd_speedtest: eraseblock read speed is 6150 KiB/s - after: mtd_speedtest: eraseblock write speed is 1055 KiB/s mtd_speedtest: eraseblock read speed is 20144 KiB/s sam9x60ek (sst26vf064b) - before: mtd_speedtest: eraseblock write speed is 4770 KiB/s mtd_speedtest: eraseblock read speed is 8062 KiB/s - after: mtd_speedtest: eraseblock write speed is 4524 KiB/s mtd_speedtest: eraseblock read speed is 21186 KiB/s Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200716043139.565734-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-19Merge series "mtd: spi-nor: Move cadence-qaudspi to spi-mem framework" from ↵Mark Brown1-0/+11
Vignesh Raghavendra <vigneshr@ti.com>: This series is a subset of "[PATCH v12 0/4] spi: cadence-quadspi: Add support for the Cadence QSPI controller" by Ramuthevar,Vadivel MuruganX <vadivel.muruganx.ramuthevar@linux.intel.com> that intended to move cadence-quadspi driver to spi-mem framework Those patches were trying to accomplish too many things in a single set of patches and need to split into smaller patches. This is reduced version of above series. Changes that are intended to make migration easy are split into separate patches. Patches 1 to 3 drop features that cannot be supported under spi-mem at the moment (backward compatibility is maintained). Patch 4-5 are trivial cleanups. Patch 6 does the actual conversion to spi-mem and patch 7 moves the driver to drivers/spi folder. I have tested both INDAC mode (used by non TI platforms like Altera SoCFPGA) and DAC mode (used by TI platforms) on TI EVMs. Patches to move move bindings over to "Documentation/devicetree/bindings/spi/" directory and also conversion of bindig doc to YAML will be posted separately. Support for Intel platform would follow that. Resend v3: Rebased onto v5.7-c1 v3: Split handling of probe deferral into separate patch (out of 5/6) Split dropping of redundant WREN to separate patch (out of 5/6) Fix a possible memleak due to lack of spi_master_put() Parse all SPI slave nodes in cqspi_setup_flash() Address misc comments from Tudor on v2 Rebase onto latest spi-nor/next v2: Rework patch 1/6 to keep "cdns,is-decoded-cs" property supported. Ramuthevar Vadivel Murugan (2): mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework spi: Move cadence-quadspi driver to drivers/spi/ Vignesh Raghavendra (6): mtd: spi-nor: cadence-quadspi: Make driver independent of flash geometry mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on failure mtd: spi-nor: cadence-quadspi: Fix error path on failure to acquire reset lines mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel mtd: spi-nor: cadence-quadspi: Drop redundant WREN in erase path drivers/mtd/spi-nor/controllers/Kconfig | 11 - drivers/mtd/spi-nor/controllers/Makefile | 1 - drivers/spi/Kconfig | 11 + drivers/spi/Makefile | 1 + .../spi-cadence-quadspi.c} | 541 +++++++----------- 5 files changed, 222 insertions(+), 343 deletions(-) rename drivers/{mtd/spi-nor/controllers/cadence-quadspi.c => spi/spi-cadence-quadspi.c} (74%) base-commit: b3a9e3b9622ae10064826dccb4f7a52bd88c7407 -- 2.26.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
2020-06-19spi: Move cadence-quadspi driver to drivers/spi/Ramuthevar Vadivel Murugan1-0/+11
Now that cadence-quadspi has been converted to use spi-mem framework, move it under drivers/spi/ Update license header to match SPI subsystem style Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20200601070444.16923-9-vigneshr@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-19spi: altera: use regmap-mmio instead of direct mmio register accessXu Yilun1-0/+1
This patch adds support for regmap. It makes preparation for supporting different ways to access the registers. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Reviewed-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/1592531021-11412-2-git-send-email-yilun.xu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16Merge series "spi: bcm63xx: add BMIPS support" from Álvaro Fernández Rojas ↵Mark Brown1-2/+2
<noltari@gmail.com>: BCM63xx SPI and HSSPI controller are present on several BMIPS SoCs (BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268). v2: use devm_reset_control_get_exclusive Álvaro Fernández Rojas (4): spi: bcm63xx-spi: add reset support spi: bcm63xx-spi: allow building for BMIPS spi: bcm63xx-hsspi: add reset support spi: bcm63xx-hsspi: allow building for BMIPS drivers/spi/Kconfig | 4 ++-- drivers/spi/spi-bcm63xx-hsspi.c | 17 +++++++++++++++++ drivers/spi/spi-bcm63xx.c | 17 +++++++++++++++++ 3 files changed, 36 insertions(+), 2 deletions(-) -- 2.27.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2020-06-16spi: add Renesas RPC-IF driverSergei Shtylyov1-0/+6
Add the SPI driver for the Renesas RPC-IF. It's the "front end" driver using the "back end" APIs in the main driver to talk to the real hardware. We only implement the 'spi-mem' interface -- there's no need to implement the usual SPI driver methods... Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Link: https://lore.kernel.org/r/1ece0e6c-71af-f0f1-709e-571f4b0b4853@cogentembedded.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16spi: bcm63xx-hsspi: allow building for BMIPSÁlvaro Fernández Rojas1-1/+1
bcm63xx-hsspi controller is present on several BMIPS SoCs (BCM6318, BCM6328, BCM6362 and BCM63268). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200615090943.2936839-5-noltari@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16spi: bcm63xx-spi: allow building for BMIPSÁlvaro Fernández Rojas1-1/+1
bcm63xx-spi controller is present on several BMIPS SoCs (BCM6358, BCM6362, BCM6368 and BCM63268). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200615090943.2936839-3-noltari@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-05-29spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI coreSerge Semin1-3/+6
Seeing all of the DW SPI driver components like DW SPI DMA/PCI/MMIO depend on the DW SPI core code it's better to use the if-endif conditional kernel config statement to signify that common dependency. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-13-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-23 23:15:48 +0300