summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-fsl-spi.c
AgeCommit message (Collapse)AuthorFilesLines
2022-12-14spi: fsl_spi: Don't change speed while chipselect is activeChristophe Leroy1-3/+16
Commit c9bfcb315104 ("spi_mpc83xx: much improved driver") made modifications to the driver to not perform speed changes while chipselect is active. But those changes where lost with the convertion to tranfer_one. Previous implementation was allowing speed changes during message transfer when cs_change flag was set. At the time being, core SPI does not provide any feature to change speed while chipselect is off, so do not allow any speed change during message transfer, and perform the transfer setup in prepare_message in order to set correct speed while chipselect is still off. Reported-by: Herve Codina <herve.codina@bootlin.com> Fixes: 64ca1a034f00 ("spi: fsl_spi: Convert to transfer_one") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/8aab84c51aa330cf91f4b43782a1c483e150a4e3.1671025244.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown <broonie@kernel.org>
2022-09-14spi: fsl_spi: Convert to transfer_oneChristophe Leroy1-114/+43
Let the core handle all the chipselect bakery and replace transfer_one_message() by transfer_one() and prepare_message(). At the time being, there is fsl_spi_cs_control() to handle chipselects. That function handles both GPIO and non-GPIO chipselects. The GPIO chipselects will now be handled by the core directly, so only handle non-GPIO chipselects and hook it to ->set_cs Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/753266abafe81722d86c3ddb8bac8ef1cb00fe8c.1660829841.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-01spi: Cleanup on failure of initial setupLukas Wunner1-0/+4
Commit c7299fea6769 ("spi: Fix spi device unregister flow") changed the SPI core's behavior if the ->setup() hook returns an error upon adding an spi_device: Before, the ->cleanup() hook was invoked to free any allocations that were made by ->setup(). With the commit, that's no longer the case, so the ->setup() hook is expected to free the allocations itself. I've identified 5 drivers which depend on the old behavior and am fixing them up hereinafter: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c spi-omap2-mcspi.c spi-pxa2xx.c Importantly, ->setup() is not only invoked on spi_device *addition*: It may subsequently be called to *change* SPI parameters. If changing these SPI parameters fails, freeing memory allocations would be wrong. That should only be done if the spi_device is finally destroyed. I am therefore using a bool "initial_setup" in 4 of the affected drivers to differentiate between the invocation on *adding* the spi_device and any subsequent invocations: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c spi-omap2-mcspi.c In spi-pxa2xx.c, it seems the ->setup() hook can only fail on spi_device addition, not any subsequent calls. It therefore doesn't need the bool. It's worth noting that 5 other drivers already perform a cleanup if the ->setup() hook fails. Before c7299fea6769, they caused a double-free if ->setup() failed on spi_device addition. Since the commit, they're fine. These drivers are: spi-mpc512x-psc.c spi-pl022.c spi-s3c64xx.c spi-st-ssc4.c spi-tegra114.c (spi-pxa2xx.c also already performs a cleanup, but only in one of several error paths.) Fixes: c7299fea6769 ("spi: Fix spi device unregister flow") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Saravana Kannan <saravanak@google.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # pxa2xx Link: https://lore.kernel.org/r/f76a0599469f265b69c371538794101fa37b5536.1622149321.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-08spi: fsl: add missing iounmap() on error in of_fsl_spi_probe()Yang Yingliang1-5/+18
Add the missing iounmap() before return from of_fsl_spi_probe() in the error handling case. Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210401140350.1677925-1-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-01spi: fsl: invert spisel_boot signal on MPC8309Rasmus Villemoes1-1/+1
Commit 7a2da5d7960a ("spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode") broke our MPC8309 board by effectively inverting the boolean value passed to fsl_spi_cs_control. The SPISEL_BOOT signal is used as chipselect, but it's not a gpio, so we cannot rely on gpiolib handling the polarity. Adapt to the new world order by inverting the logic here. This does assume that the slave sitting at the SPISEL_BOOT is active low, but should that ever turn out not to be the case, one can create a stub gpiochip driver controlling a single gpio (or rather, a single "spo", special-purpose output). Fixes: 7a2da5d7960a ("spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode") Cc: stable@vger.kernel.org Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/r/20210130143545.505613-1-rasmus.villemoes@prevas.dk Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-14spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->modeChristophe Leroy1-3/+2
Commit 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors") broke fsl spi driver. As now we fully rely on gpiolib for handling the polarity of chip selects, the driver shall not alter the GPIO value anymore when SPI_CS_HIGH is not set in spi->mode. Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/6b51cc2bfbca70d3e9b9da7b7aa4c7a9d793ca0e.1610629002.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-30spi: fsl: fix use of spisel_boot signal on MPC8309Rasmus Villemoes1-3/+8
Commit 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors") broke the use of the SPISEL_BOOT signal as a chip select on the MPC8309. pdata->max_chipselect, which becomes master->num_chipselect, must be initialized to take into account the possibility that there's one more chip select in use than the number of GPIO chip selects. Cc: stable@vger.kernel.org # v5.4+ Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors") Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/r/20201127152947.376-1-rasmus.villemoes@prevas.dk Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-02spi: fsl: add missing __iomem annotationLuc Van Oostenryck1-9/+9
The field mspi->reg_base is annotated as an __iomem pointer. Good. However, this field is often assigned to a temporary variable: before being used. For example: struct fsl_spi_reg *reg_base = mspi->reg_base; But this variable is missing the __iomem annotation. So, add the missing __iomem and make sparse & the bot happier. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Link: https://lore.kernel.org/r/20200622162611.83694-1-luc.vanoostenryck@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-14spi: spi-fsl-spi: Fix checkpatch error "foo * bar" should be "foo *bar"Aishwarya R1-1/+1
This patch fixes checkpatch error "foo * bar" should be "foo *bar" Signed-off-by: Aishwarya R <aishwaryarj100@gmail.com> Link: https://lore.kernel.org/r/20200407122855.5531-1-aishwaryarj100@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-14spi: fsl: simplify error path in of_fsl_spi_probe()Christophe Leroy1-19/+8
No need to 'goto err;' for just doing a return. return directly from where the error happens. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/2a4a7e11b37cfa0558d68f0d35e90d6da858b059.1579017697.git.christophe.leroy@c-s.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-16spi: fsl: use platform_get_irq() instead of of_irq_to_resource()Christophe Leroy1-3/+3
Unlike irq_of_parse_and_map() which has a dummy definition on SPARC, of_irq_to_resource() hasn't. But as platform_get_irq() can be used instead and is generic, use it. Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: Mark Brown <broonie@kernel.org> Fixes: 3194d2533eff ("spi: fsl: don't map irq during probe") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/091a277fd0b3356dca1e29858c1c96983fc9cb25.1576172743.git.christophe.leroy@c-s.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2019-12-09spi: fsl: don't map irq during probeChristophe Leroy1-3/+2
With lastest kernel, the following warning is observed at startup: [ 1.500609] ------------[ cut here ]------------ [ 1.505225] remove_proc_entry: removing non-empty directory 'irq/22', leaking at least 'fsl_spi' [ 1.514234] WARNING: CPU: 0 PID: 1 at fs/proc/generic.c:682 remove_proc_entry+0x198/0x1c0 [ 1.522403] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.0-s3k-dev-02248-g93532430a4ff #2564 [ 1.530724] NIP: c0197694 LR: c0197694 CTR: c0050d80 [ 1.535762] REGS: df4a5af0 TRAP: 0700 Not tainted (5.4.0-02248-g93532430a4ff) [ 1.543818] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22028222 XER: 00000000 [ 1.550524] [ 1.550524] GPR00: c0197694 df4a5ba8 df4a0000 00000054 00000000 00000000 00004a38 00000010 [ 1.550524] GPR08: c07c5a30 00000800 00000000 00001032 22000208 00000000 c0004b14 00000000 [ 1.550524] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0830000 c07fc078 [ 1.550524] GPR24: c08e8ca0 df665d10 df60ea98 c07c9db8 00000001 df5d5ae3 df5d5a80 df43f8e3 [ 1.585327] NIP [c0197694] remove_proc_entry+0x198/0x1c0 [ 1.590628] LR [c0197694] remove_proc_entry+0x198/0x1c0 [ 1.595829] Call Trace: [ 1.598280] [df4a5ba8] [c0197694] remove_proc_entry+0x198/0x1c0 (unreliable) [ 1.605321] [df4a5bd8] [c0067acc] unregister_irq_proc+0x5c/0x70 [ 1.611238] [df4a5bf8] [c005fbc4] free_desc+0x3c/0x80 [ 1.616286] [df4a5c18] [c005fe2c] irq_free_descs+0x70/0xa8 [ 1.621778] [df4a5c38] [c033d3fc] of_fsl_spi_probe+0xdc/0x3cc [ 1.627525] [df4a5c88] [c02f0f64] platform_drv_probe+0x44/0xa4 [ 1.633350] [df4a5c98] [c02eee44] really_probe+0x1ac/0x418 [ 1.638829] [df4a5cc8] [c02ed3e8] bus_for_each_drv+0x64/0xb0 [ 1.644481] [df4a5cf8] [c02ef950] __device_attach+0xd4/0x128 [ 1.650132] [df4a5d28] [c02ed61c] bus_probe_device+0xa0/0xbc [ 1.655783] [df4a5d48] [c02ebbe8] device_add+0x544/0x74c [ 1.661096] [df4a5d88] [c0382b78] of_platform_device_create_pdata+0xa4/0x100 [ 1.668131] [df4a5da8] [c0382cf4] of_platform_bus_create+0x120/0x20c [ 1.674474] [df4a5df8] [c0382d50] of_platform_bus_create+0x17c/0x20c [ 1.680818] [df4a5e48] [c0382e88] of_platform_bus_probe+0x9c/0xf0 [ 1.686907] [df4a5e68] [c0751404] __machine_initcall_cmpcpro_cmpcpro_declare_of_platform_devices+0x74/0x1a4 [ 1.696629] [df4a5e98] [c072a4cc] do_one_initcall+0x8c/0x1d4 [ 1.702282] [df4a5ef8] [c072a768] kernel_init_freeable+0x154/0x204 [ 1.708455] [df4a5f28] [c0004b2c] kernel_init+0x18/0x110 [ 1.713769] [df4a5f38] [c00122ac] ret_from_kernel_thread+0x14/0x1c [ 1.719926] Instruction dump: [ 1.722889] 2c030000 4182004c 3863ffb0 3c80c05f 80e3005c 388436a0 3c60c06d 7fa6eb78 [ 1.730630] 7fe5fb78 38840280 38634178 4be8c611 <0fe00000> 4bffff6c 3c60c071 7fe4fb78 [ 1.738556] ---[ end trace 05d0720bf2e352e2 ]--- The problem comes from the error path which calls irq_dispose_mapping() while the IRQ has been requested with devm_request_irq(). IRQ doesn't need to be mapped with irq_of_parse_and_map(). The only need is to get the IRQ virtual number. For that, use of_irq_to_resource() instead of the irq_of_parse_and_map()/irq_dispose_mapping() pair. Fixes: 500a32abaf81 ("spi: fsl: Call irq_dispose_mapping in err path") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/518cfb83347d5372748e7fe72f94e2e9443d0d4a.1575905123.git.christophe.leroy@c-s.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-28spi: fsl: Handle the single hardwired chipselect caseLinus Walleij1-2/+12
The Freescale MPC8xxx had a special quirk for handling a single hardwired chipselect, the case when we're using neither GPIO nor native chip select: when inspecting the device tree and finding zero "cs-gpios" on the device node the code would assume we have a single hardwired chipselect that leaves the device always selected. This quirk is not handled by the new core code, so we need to check the "cs-gpios" explicitly in the driver and set pdata->max_chipselect = 1 which will later fall through to the SPI master ->num_chipselect. Make sure not to assign the chip select handler in this case: there is no handling needed since the chip is always selected, and this is what the old code did as well. Cc: Christophe Leroy <christophe.leroy@c-s.fr> Reported-by: Christophe Leroy <christophe.leroy@c-s.fr> Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> (No tested the Link: https://lore.kernel.org/r/20191128083718.39177-3-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-28spi: fsl: Fix GPIO descriptor supportLinus Walleij1-0/+1
This makes the driver actually support looking up GPIO descriptor. A coding mistake in the initial descriptor support patch was that it was failing to turn on the very feature it was implementing. Mea culpa. Cc: Christophe Leroy <christophe.leroy@c-s.fr> Reported-by: Christophe Leroy <christophe.leroy@c-s.fr> Fixes: 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/20191128083718.39177-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-15spi: use new `spi_transfer_delay_exec` helper where straightforwardAlexandru Ardelean1-2/+1
For many places in the spi drivers, using the new `spi_transfer_delay` helper is straightforward. It's just replacing: ``` if (t->delay_usecs) udelay(t->delay_usecs); ``` with `spi_transfer_delay(t)` which handles both `delay_usecs` and the new `delay` field. This change replaces in all places (in the spi drivers) where this change is simple. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20190926105147.7839-10-alexandru.ardelean@analog.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-28spi: fsl: Convert to use CS GPIO descriptorsLinus Walleij1-168/+25
This converts the Freescale SPI master driver to use GPIO descriptors for chip select handling. The Freescale (fsl) driver has a lot of quirks to look up "gpios" rather than "cs-gpios" from the device tree. After the prior patch that will make gpiolib return the GPIO descriptor for "gpios" in response to a request for "cs-gpios", this code can be cut down quite a bit. The driver has custom handling of chip select rather than using the core (which may be possible but not done in this patch) so it still needs to refer directly to spi->cs_gpiod to set the chip select. Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190804003539.985-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-10Merge tag 'spi-fix-v5.2-rc4' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small set of fixes here. One core fix for error handling when we fail to set up the hardware before initiating a transfer and another one reverting a change in the core which broke Raspberry Pi in common use cases as part of some optimization work. There's also a couple of driver specific fixes" * tag 'spi-fix-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: abort spi_sync if failed to prepare_transfer_hardware spi: spi-fsl-spi: call spi_finalize_current_message() at the end spi: bitbang: Fix NULL pointer dereference in spi_unregister_master spi: Fix Raspberry Pi breakage
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-22spi: spi-fsl-spi: call spi_finalize_current_message() at the endChristophe Leroy1-1/+1
spi_finalize_current_message() shall be called once all actions are finished, otherwise the last actions might step over a newly started transfer. Fixes: c592becbe704 ("spi: fsl-(e)spi: migrate to generic master queueing") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-02spi: spi-fsl-spi: automatically adapt bits-per-word in cpu modeRasmus Villemoes1-0/+16
Taking one interrupt for every byte is rather slow. Since the controller is perfectly capable of transmitting 32 bits at a time, change t->bits_per-word to 32 when the length is divisible by 4 and large enough that the reduced number of interrupts easily compensates for the one or two extra fsl_spi_setup_transfer() calls this causes. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-02spi: spi-fsl-spi: allow changing bits_per_word while CS is still activeRasmus Villemoes1-5/+6
Commit c9bfcb315104 (spi_mpc83xx: much improved driver) introduced logic to ensure bits_per_word and speed_hz stay the same for a series of spi_transfers with CS active, arguing that The current driver may cause glitches on SPI CLK line since one must disable the SPI controller before changing any HW settings. This sounds quite reasonable. So this is a quite naive attempt at relaxing this sanity checking to only ensure that speed_hz is constant - in the faint hope that if we do not causes changes to the clock-related fields of the SPMODE register (DIV16 and PM), those glitches won't appear. The purpose of this change is to allow automatically optimizing large transfers to use 32 bits-per-word; taking one interrupt for every byte is extremely slow. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-01spi: spi-fsl-spi: relax message sanity checking a littleRasmus Villemoes1-3/+5
The comment says that we should not allow changes (to bits_per_word/speed_hz) while CS is active, and indeed the code below does fsl_spi_setup_transfer() when the ->cs_change of the previous spi_transfer was set (and for the very first transfer). So the sanity checking is a bit too strict - we can change it to follow the same logic as is used by the actual transfer loop. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-01spi: spi-fsl-spi: remove always-true conditional in fsl_spi_do_one_msgRasmus Villemoes1-6/+4
__spi_validate() in the generic SPI code sets ->speed_hz and ->bits_per_word to non-zero values, so this condition is always true. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-18spi: spi-fsl-spi: support use of the SPISEL_BOOT signal on MPC8309Rasmus Villemoes1-5/+35
The MPC8309 has a dedicated signal, SPISEL_BOOT, usually used as chip select for the flash device from which the bootloader is loaded. It is not an ordinary gpio, but is simply controlled via the SPI_CS register in the system configuration. To allow accessing such a spi slave, we need to teach fsl_spi_cs_control() how to control the SPISEL_BOOT signal. To distinguish the gpio-controlled slaves, continue to have those use chip_select values of 0..ngpios-1, and use chip_select == ngpios for the boot flash. I'm not too happy with all the ifdeffery, but it seems to be necessary for guarding the sysdev/fsl_soc.h and use of get_immrbase() (spi-fsl-lib.c already contains similar ifdeffery). Googling suggests that the MPC8306 is similar, with the SPI_CS register at the same offset. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-26Merge remote-tracking branches 'spi/topic/devprop', 'spi/topic/fsl', ↵Mark Brown1-1/+2
'spi/topic/fsl-dspi', 'spi/topic/imx' and 'spi/topic/lantiq' into spi-next
2017-03-13spi: fsl: Call irq_dispose_mapping in err pathLiu Xiang1-1/+2
Irq_dispose_mapping should be called in err path to release the resources that irq_of_parse_and_map requested. Signed-off-by: Liu Xiang <liu.xiang6@zte.com.cn> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-17spi: fsl: Combine substrings for two messagesMarkus Elfring1-6/+6
The script "checkpatch.pl" pointed information out like the following. WARNING: quoted string split across lines Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-17spi: fsl: Use kcalloc() in of_fsl_spi_get_chipselects()Markus Elfring1-1/+1
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus reuse the corresponding function "kcalloc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-17spi: fsl: Use kmalloc_array() in of_fsl_spi_get_chipselects()Markus Elfring1-1/+2
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-30spi: fsl-(e)spi: Fix checking return value of devm_ioremap_resourceAxel Lin1-2/+2
devm_ioremap_resource() returns ERR_PTR on error. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-28spi: fsl-(e)spi: simplify cleanup codeHeiner Kallweit1-11/+7
Now that most cleanup is done automatically the remove functions can be significantly simplified. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-28spi: fsl-(e)spi: migrate to using devm_ functions to simplify cleanupHeiner Kallweit1-13/+8
Migrate fsl-espi and fsl-spi to using the managed devm_ functions for resource handling. This simplifies the cleanup. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-15Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-05spi: fsl-spi: remove unused variable assignmentHeiner Kallweit1-1/+0
Remove an unused variable assignment. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-05spi: spi-fsl-spi: Return an error code in fsl_spi_do_one_msg()Fabio Estevam1-1/+1
Since commit c592becbe704127 ("spi: fsl-(e)spi: migrate to generic master queueing") the function fsl_spi_do_one_msg() is not void anymore, so return an error code to avoid the following buid warning: drivers/spi/spi-fsl-spi.c: In function 'fsl_spi_do_one_msg': >> drivers/spi/spi-fsl-spi.c:374:4: warning: 'return' with no value, in function returning non-void [-Wreturn-type] return; ^ Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-03spi: fsl-(e)spi: migrate to generic master queueingHeiner Kallweit1-8/+6
Migrates the fsl-(e)spi driver to use the generic master queuing. Avoids the "master is unqueued, this is deprecated" warning. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20spi: drop owner assignment from platform_driversWolfram Sang1-2/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-03Merge remote-tracking branches 'spi/topic/davinci', 'spi/topic/doc', ↵Mark Brown1-11/+11
'spi/topic/dw' and 'spi/topic/fsl' into spi-next
2014-09-29spi: fsl: Sort include headers alphabeticallyXiubo Li1-11/+11
Sort all the include headers alphabetically for the freescale spi drivers. If the inlcude headers sorted out of order, maybe the best logical choice is to append new ones after the exist ones, while this may create a lot of potential for duplicates and conflicts for each diffenent changes will add new headers in the same location. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-01spi: fsl: Don't use devm_kzalloc in master->setup callbackAxel Lin1-3/+7
device_add() expects that any memory allocated via devm_* API is only done in the device's probe function. Fix below boot warning: [ 3.092348] WARNING: at drivers/base/dd.c:286 [ 3.096637] Modules linked in: [ 3.099697] CPU: 0 PID: 25 Comm: kworker/u2:1 Tainted: G W 3.16.1-s3k-drv-999-svn5771_knld-999 #158 [ 3.109610] Workqueue: deferwq deferred_probe_work_func [ 3.114736] task: c787f020 ti: c790c000 task.ti: c790c000 [ 3.120062] NIP: c01df158 LR: c01df144 CTR: 00000000 [ 3.124983] REGS: c790db30 TRAP: 0700 Tainted: G W (3.16.1-s3k-drv-999-svn5771_knld-999) [ 3.134162] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22002082 XER: 20000000 [ 3.140703] [ 3.140703] GPR00: 00000001 c790dbe0 c787f020 00000044 00000054 00000308 c056da0e 20737069 [ 3.140703] GPR08: 33323736 000ebfe0 00000308 000ebfdf 22002082 00000000 c046c5a0 c046c608 [ 3.140703] GPR16: c046c614 c046c620 c046c62c c046c638 c046c648 c046c654 c046c68c c046c6c4 [ 3.140703] GPR24: 00000000 00000000 00000003 c0401aa0 c0596638 c059662c c054e7a8 c7996800 [ 3.170102] NIP [c01df158] driver_probe_device+0xf8/0x334 [ 3.175431] LR [c01df144] driver_probe_device+0xe4/0x334 [ 3.180633] Call Trace: [ 3.183093] [c790dbe0] [c01df144] driver_probe_device+0xe4/0x334 (unreliable) [ 3.190147] [c790dc10] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.195741] [c790dc40] [c01df5fc] device_attach+0xcc/0xf8 [ 3.201076] [c790dc60] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.206666] [c790dc80] [c01db9f8] device_add+0x270/0x564 [ 3.211923] [c790dcc0] [c0219e84] spi_add_device+0xc0/0x190 [ 3.217427] [c790dce0] [c021a79c] spi_register_master+0x720/0x834 [ 3.223455] [c790dd40] [c021cb48] of_fsl_spi_probe+0x55c/0x614 [ 3.229234] [c790dda0] [c01e0d2c] platform_drv_probe+0x30/0x74 [ 3.234987] [c790ddb0] [c01df18c] driver_probe_device+0x12c/0x334 [ 3.241008] [c790dde0] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.246602] [c790de10] [c01df5fc] device_attach+0xcc/0xf8 [ 3.251937] [c790de30] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.257536] [c790de50] [c01de9d8] deferred_probe_work_func+0x98/0xe0 [ 3.263816] [c790de70] [c00305b8] process_one_work+0x18c/0x440 [ 3.269577] [c790dea0] [c0030a00] worker_thread+0x194/0x67c [ 3.275105] [c790def0] [c0039198] kthread+0xd0/0xe4 [ 3.279911] [c790df40] [c000c6d0] ret_from_kernel_thread+0x5c/0x64 [ 3.285970] Instruction dump: [ 3.288900] 80de0000 419e01d0 3b7b0038 3c60c046 7f65db78 38635264 48211b99 813f00a0 [ 3.296559] 381f00a0 7d290278 3169ffff 7c0b4910 <0f000000> 93df0044 7fe3fb78 4bfffd4d Reported-by: leroy christophe <christophe.leroy@c-s.fr> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2014-06-06spi: fsl-spi: Make of_device_id array constJingoo Han1-1/+1
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-14spi: fsl-spi: Fix memory leakAxel Lin1-1/+1
mpc8xxx_spi_probe() has set master->cleanup = mpc8xxx_spi_cleanup, however current code overrides the setting in fsl_spi_probe() and set master->cleanup = fsl_spi_cleanup. Thus the memory allocated for cs is not freed anywhere. Convert to use devm_kzalloc to fix the memory leak. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-11Merge remote-tracking branches 'spi/fix/complete', 'spi/fix/efm32', ↵Mark Brown1-1/+2
'spi/fix/omap2-mcspi' and 'spi/fix/qup' into spi-linus
2014-04-03spi: Always check complete callback before calling itAxel Lin1-1/+2
Since commit 1e25cd4729bd "spi: Do not require a completion", this checking is required to prevent NULL pointer dereference. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-23spi: fsl-spi: Convert to let spi core validate xfer->bits_per_wordAxel Lin1-6/+4
Set bits_per_word_mask so spi core will reject transfers that attempt to use an unsupported bits_per_word value. fsl_spi_grlib_probe() may update mpc8xxx_spi->max_bits_per_word setting. So set master->bits_per_word_mask after fsl_spi_grlib_probe(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-04spi: fsl: Fix problem with multi message transfersStefan Roese1-5/+15
When used via spidev with more than one messages to tranfer via SPI_IOC_MESSAGE the current implementation would return with -EINVAL, since bits_per_word and speed_hz are set in all transfer structs. And in the 2nd loop status will stay at -EINVAL as its not overwritten again via fsl_spi_setup_transfer(). This patch changes this behavious by first checking if one of the messages uses different settings. If this is the case the function will return with -EINVAL. If not, the messages are transferred correctly. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang1-1/+1
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-05Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-08-29spi: use dev_get_platdata()Jingoo Han1-6/+7
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-15PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.Rusty Russell1-1/+1
Sweep of the simple cases. Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>