summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)AuthorFilesLines
2021-03-11spi: cadence: set cqspi to the driver_data field of struct deviceMeng Li1-0/+1
When initialize cadence qspi controller, it is need to set cqspi to the driver_data field of struct device, because it will be used in function cqspi_remove/suspend/resume(). Otherwise, there will be a crash trace as below when invoking these finctions. Fixes: 31fb632b5d43 ("spi: Move cadence-quadspi driver to drivers/spi/") Cc: stable@vger.kernel.org Signed-off-by: Meng Li <Meng.Li@windriver.com> Link: https://lore.kernel.org/r/20210311091220.3615-1-Meng.Li@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-23Merge tag 'powerpc-5.12-1' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - A large series adding wrappers for our interrupt handlers, so that irq/nmi/user tracking can be isolated in the wrappers rather than spread in each handler. - Conversion of the 32-bit syscall handling into C. - A series from Nick to streamline our TLB flushing when using the Radix MMU. - Switch to using queued spinlocks by default for 64-bit server CPUs. - A rework of our PCI probing so that it happens later in boot, when more generic infrastructure is available. - Two small fixes to allow 32-bit little-endian processes to run on 64-bit kernels. - Other smaller features, fixes & cleanups. Thanks to: Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang Fan, Christophe Leroy, Christopher M. Riedl, Fabiano Rosas, Florian Fainelli, Frederic Barrat, Ganesh Goudar, Hari Bathini, Jiapeng Chong, Joseph J Allen, Kajol Jain, Markus Elfring, Michal Suchanek, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pingfan Liu, Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan Das, Stephen Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, and Zheng Yongjun. * tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (188 commits) powerpc/perf: Adds support for programming of Thresholding in P10 powerpc/pci: Remove unimplemented prototypes powerpc/uaccess: Merge raw_copy_to_user_allowed() into raw_copy_to_user() powerpc/uaccess: Merge __put_user_size_allowed() into __put_user_size() powerpc/uaccess: get rid of small constant size cases in raw_copy_{to,from}_user() powerpc/64: Fix stack trace not displaying final frame powerpc/time: Remove get_tbl() powerpc/time: Avoid using get_tbl() spi: mpc52xx: Avoid using get_tbl() powerpc/syscall: Avoid storing 'current' in another pointer powerpc/32: Handle bookE debugging in C in syscall entry/exit powerpc/syscall: Do not check unsupported scv vector on PPC32 powerpc/32: Remove the counter in global_dbcr0 powerpc/32: Remove verification of MSR_PR on syscall in the ASM entry powerpc/syscall: implement system call entry/exit logic in C for PPC32 powerpc/32: Always save non volatile GPRs at syscall entry powerpc/syscall: Change condition to check MSR_RI powerpc/syscall: Save r3 in regs->orig_r3 powerpc/syscall: Use is_compat_task() powerpc/syscall: Make interrupt.c buildable on PPC32 ...
2021-02-23Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-3/+2
Pull ARM updates from Russell King: - Generalise byte swapping assembly - Update debug addresses for STI - Validate start of physical memory with DTB - Do not clear SCTLR.nTLSMD in decompressor - amba/locomo/sa1111 devices remove method return type is void - address markers for KASAN in page table dump * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void amba: Make use of bus_type functions amba: Make the remove callback return void vfio: platform: simplify device removal amba: reorder functions amba: Fix resource leak for drivers without .remove ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions ARM: 9051/1: vdso: remove unneded extra-y addition ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible ARM: 9049/1: locomo: make locomo bus's remove callback return void ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void ARM: 9047/1: smp: remove unused variable ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB ARM: 9042/1: debug: no uncompress debugging while semihosting ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
2021-02-22Merge tag 'spi-v5.12' of ↵Linus Torvalds32-2434/+2272
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The main focus of this release from a framework point of view has been spi-mem where we've acquired support for a few new hardware features which enable better performance on suitable hardware. Otherwise mostly thanks to Arnd's cleanup efforts on old platforms we've removed several obsolete drivers which just about balance out the newer drivers we've added this cycle. Summary: - Allow drivers to flag if they are unidirectional. - Support for DTR mode and hardware acceleration of dummy cycles in spi-mem. - Support for Allwinder H616, Intel Lightning Mountain, nVidia Tegra QuadSPI, Realtek RTL838x and RTL839x. - Removal of obsolete EFM32, Txx9 and SIRF Prima and Atlas drivers" * tag 'spi-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (76 commits) spi: Skip zero-length transfers in spi_transfer_one_message() spi: dw: Avoid stack content exposure spi: cadence-quadspi: Use spi_mem_dtr_supports_op() spi: spi-mem: add spi_mem_dtr_supports_op() spi: atmel-quadspi: Disable the QSPI IP at suspend() spi: pxa2xx: Add IDs for the controllers found on Intel Lynxpoint spi: pxa2xx: Fix the controller numbering for Wildcat Point spi: Change provied to provided in the file spi.h spi: mediatek: add set_cs_timing support spi: support CS timing for HW & SW mode spi: add power control when set_cs_timing spi: stm32: make spurious and overrun interrupts visible spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC spi: stm32: defer probe for reset spi: stm32: driver uses reset controller only at init spi: stm32h7: ensure message are smaller than max size spi: stm32: use bitfield macros spi: stm32: do not mandate cs_gpio spi: stm32: properly handle 0 byte transfer spi: clps711xx: remove redundant white-space ...
2021-02-21Merge tag 'acpi-5.12-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20210105, fix and clean up the handling of device properties, add support for setting global profile of the platform, clean up device enumeration, the CPPC library, the APEI support and more, update the documentation, consolidate the printing of messages in several places and make assorted janitorial changes. Specifics: - Update ACPICA code in the kernel to upstream revision 20201113 with changes as follows: * Remove the MTMR (Mid-Timer) table (Al Stone). * Remove the VRTC table (Al Stone). * Add type casts for string functions (Bob Moore). * Update all copyrights to 2021 (Bob Moore). * Fix exception code class checks (Maximilian Luz). * Clean up exception code class checks (Maximilian Luz). * Fix -Wfallthrough (Nick Desaulniers). - Add support for setting and reading global profile of the platform along with documentation (Mark Pearson, Hans de Goede, Jiaxun Yang). - Fix fwnode properties matching and clean up the code handling device properties and its documentation (Rafael Wysocki, Andy Shevchenko). - Clean up ACPI-based device enumeration code (Rafael Wysocki). - Clean up the CPPC support library code (Ionela Voinescu). - Clean up the APEI support code (Yang Li, Yazen Ghannam). - Update GPIO-related properties documentation (Flavio Suligoi). - Consolidate and clean up the printing of messages in several places (Rafael Wysocki). - Fix error code path in configfs handling code (Qinglang Miao). - Use DEVICE_ATTR_<RW|RO|WO> macros where applicable (Dwaipayan Ray). - Replace tests for !ACPI_FAILURE with tests for ACPI_SUCCESS in multiple places (Bjorn Helgaas)" * tag 'acpi-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits) ACPI: property: Satisfy kernel doc validator (part 2) ACPI: property: Satisfy kernel doc validator (part 1) ACPI: property: Make acpi_node_prop_read() static ACPI: property: Remove dead code ACPI: property: Fix fwnode string properties matching ACPI: OSL: Clean up printing messages ACPI: OSL: Rework acpi_check_resource_conflict() ACPI: APEI: ERST: remove unneeded semicolon ACPI: thermal: Clean up printing messages ACPI: video: Clean up printing messages ACPI: button: Clean up printing messages ACPI: battery: Clean up printing messages ACPI: AC: Clean up printing messages ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more ACPI: utils: Clean up printing messages ACPI: scan: Clean up printing messages ACPI: bus: Clean up printing messages ACPI: PM: Clean up printing messages ACPI: power: Clean up printing messages ACPI: APEI: Add is_generic_error() to identify GHES sources ...
2021-02-21Merge tag 'arm-platform-removal-v5.12' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC platform removals from Arnd Bergmann: "There are a lot of platforms that have not seen any interesting code changes in the past five years or more. I made a list and asked around which ones are no longer in use, and received confirmation about six ARM platforms and the TI C6x architecture that have all reached the end of their life upstream, with no known users remaining: - efm32 - added in 2011, first Cortex-M, no notable changes after 2013 - picoxcell - added in 2011, abandoned after 2012 acquisition - prima2 - added in 20111, no notable changes since 2015 - tango - added in 2015, sporadic changes until 2017, but abandoned - u300 - added in 2009, no notable changes since 2013 - zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes - arch/c6x - added in 2011, but work stalled soon after that A number of other platforms on the original list turned out to still have users. In some cases there are out-of-tree patches and users that plan to contribute them in the future, in other cases the code is complete and works reliably" Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/ * tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: remove u300 platform ARM: remove tango platform ARM: remove zte zx platform ARM: remove sirf prima2/atlas platforms c6x: remove architecture MAINTAINERS: Remove deleted platform efm32 ARM: drop efm32 platform ARM: Remove PicoXcell platform support ARM: dts: Remove PicoXcell platforms
2021-02-15Merge branches 'acpi-misc', 'acpi-cppc', 'acpi-docs', 'acpi-config' and ↵Rafael J. Wysocki1-1/+1
'acpi-apei' * acpi-misc: ACPI: Test for ACPI_SUCCESS rather than !ACPI_FAILURE ACPI: Use DEVICE_ATTR_<RW|RO|WO> macros * acpi-cppc: ACPI: CPPC: initialise vaddr pointers to NULL ACPI: CPPC: add __iomem annotation to generic_comm_base pointer ACPI: CPPC: remove __iomem annotation for cpc_reg's address * acpi-docs: Documentation: ACPI: add new rule for gpio-line-names * acpi-config: ACPI: configfs: add missing check after configfs_register_default_group() * acpi-apei: ACPI: APEI: ERST: remove unneeded semicolon ACPI: APEI: Add is_generic_error() to identify GHES sources
2021-02-12Merge remote-tracking branch 'spi/for-5.12' into spi-nextMark Brown28-2423/+2244
2021-02-12spi: Skip zero-length transfers in spi_transfer_one_message()Nicolas Saenz Julienne1-1/+1
With the introduction of 26751de25d25 ("spi: bcm2835: Micro-optimise FIFO loops") it has become apparent that some users might initiate zero-length SPI transfers. A fact the micro-optimization omitted, and which turned out to cause crashes[1]. Instead of changing the micro-optimization itself, use a bigger hammer and skip zero-length transfers altogether for drivers using the default transfer_one_message() implementation. Reported-by: Phil Elwell <phil@raspberrypi.com> Fixes: 26751de25d25 ("spi: bcm2835: Micro-optimise FIFO loops") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> [1] https://github.com/raspberrypi/linux/issues/4100 Link: https://lore.kernel.org/r/20210211180820.25757-1-nsaenzjulienne@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-12spi: dw: Avoid stack content exposureKees Cook1-1/+1
Since "data" is u32, &data is a "u32 *" type, which means pointer math will move in u32-sized steps. This was meant to be a byte offset, so cast &data to "char *" to aim the copy into the correct location. Seen with -Warray-bounds (and found by Coverity): In file included from ./include/linux/string.h:269, from ./arch/powerpc/include/asm/paca.h:15, from ./arch/powerpc/include/asm/current.h:13, from ./include/linux/mutex.h:14, from ./include/linux/notifier.h:14, from ./include/linux/clk.h:14, from drivers/spi/spi-dw-bt1.c:12: In function 'memcpy', inlined from 'dw_spi_bt1_dirmap_copy_from_map' at drivers/spi/spi-dw-bt1.c:87:3: ./include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset 4 is out of the bounds [0, 4] of object 'data' with type 'u32' {aka 'unsigned int'} [-Warray-bounds] 20 | #define __underlying_memcpy __builtin_memcpy | ^ ./include/linux/fortify-string.h:191:9: note: in expansion of macro '__underlying_memcpy' 191 | return __underlying_memcpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~ drivers/spi/spi-dw-bt1.c: In function 'dw_spi_bt1_dirmap_copy_from_map': drivers/spi/spi-dw-bt1.c:77:6: note: 'data' declared here 77 | u32 data; | ^~~~ Addresses-Coverity: CID 1497771 Out-of-bounds access Fixes: abf00907538e ("spi: dw: Add Baikal-T1 SPI Controller glue driver") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20210211203714.1929862-1-keescook@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-11spi: cadence-quadspi: Use spi_mem_dtr_supports_op()Pratyush Yadav1-59/+4
Use the newly introduced spi_mem_dtr_supports_op() to check DTR op support. This means the buswidth check does not need to be replicated. It also happens to fix a bug where STR ops with a 2-byte opcode would be reported as supported. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20210204141218.32229-2-p.yadav@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-11spi: spi-mem: add spi_mem_dtr_supports_op()Pratyush Yadav1-3/+19
spi_mem_default_supports_op() rejects DTR ops by default to ensure that the controller drivers that haven't been updated with DTR support continue to reject them. It also makes sure that controllers that don't support DTR mode at all (which is most of them at the moment) also reject them. This means that controller drivers that want to support DTR mode can't use spi_mem_default_supports_op(). Driver authors have to roll their own supports_op() function and mimic the buswidth checks. See spi-cadence-quadspi.c for example. Or even worse, driver authors might skip it completely or get it wrong. Add spi_mem_dtr_supports_op(). It provides a basic sanity check for DTR ops and performs the buswidth requirement check. Move the logic for checking buswidth in spi_mem_default_supports_op() to a separate function so the logic is not repeated twice. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20210204141218.32229-1-p.yadav@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-11spi: atmel-quadspi: Disable the QSPI IP at suspend()Tudor Ambarus1-0/+1
It is safer to disable the QSPI IP at suspend, in order to avoid possible impact of glitches on the internal FSMs. This is a theoretical fix, there were no problems seen as of now. Tested on sama5d2 and sam9x60 versions of the IP. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20210210135428.204134-1-tudor.ambarus@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-11spi: mpc52xx: Avoid using get_tbl()Christophe Leroy1-6/+6
get_tbl() is confusing as it returns the content TBL register on PPC32 but the concatenation of TBL and TBU on PPC64. Use mftb() instead. This will allow the removal of get_tbl() in a following patch. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/99bf008e2970de7f8ed3225cda69a6d06ae1a644.1612866360.git.christophe.leroy@csgroup.eu
2021-02-10spi: pxa2xx: Add IDs for the controllers found on Intel LynxpointAndy Shevchenko1-0/+2
Add IDs for the controllers found on Intel Lynxpoint. In particular it's Macbook Air 6,2 devices. Cc: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210208163816.22147-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-10spi: pxa2xx: Fix the controller numbering for Wildcat PointAndy Shevchenko1-8/+19
Wildcat Point has two SPI controllers and added one is actually second one. Fix the numbering by adding the description of the first one. Fixes: caba248db286 ("spi: spi-pxa2xx-pci: Add ID and driver type for WildcatPoint PCH") Cc: Leif Liddy <leif.liddy@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210208163816.22147-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-08spi: mediatek: add set_cs_timing supportleilk.liu1-16/+56
this patch add set_cs_timing support for HW CS mode. Signed-off-by: leilk.liu <leilk.liu@mediatek.com> Link: https://lore.kernel.org/r/20210207030953.9297-4-leilk.liu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-08spi: support CS timing for HW & SW modeleilk.liu1-3/+6
this patch supports the controller's HW CS and SW CS via use cs_gpio. Signed-off-by: leilk.liu <leilk.liu@mediatek.com> Link: https://lore.kernel.org/r/20210207030953.9297-3-leilk.liu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-08spi: add power control when set_cs_timingleilk.liu1-3/+22
As to set_cs_timing takes effect immediately, power spi is needed when call spi_set_cs_timing. Signed-off-by: leilk.liu <leilk.liu@mediatek.com> Link: https://lore.kernel.org/r/20210207030953.9297-2-leilk.liu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32: make spurious and overrun interrupts visibleAlain Volmat1-11/+4
We do not expect to receive spurious interrupts so rise a warning if it happens. RX overrun is an error condition that signals a corrupted RX stream both in dma and in irq modes. Report the error and abort the transfer in either cases. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-9-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SECAmelie Delaunay1-3/+1
Replace SPI_1HZ_NS private constant with NSEC_PER_SEC, which is easier to read and understand. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-8-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32: defer probe for resetAlain Volmat1-2/+8
Defer the probe operation when a reset controller device is expected but have not yet been probed. This change replaces use of devm_reset_control_get_exclusive() with devm_reset_control_get_optional_exclusive() as reset controller is optional which is now explicitly stated. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-7-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32: driver uses reset controller only at initEtienne Carriere1-6/+5
Remove reset controller device reference from the device private structure since it is used only at probe time and can be discarded once used to reset the SPI device. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-6-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32h7: ensure message are smaller than max sizeAlain Volmat1-0/+14
Ensure that messages given to transfer_one handler can actually be handled by it. For that purpose rely on the SPI framework spi_split_transfers_maxsize function to split messages whenever necessary. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-5-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32: use bitfield macrosAmelie Delaunay1-36/+18
To avoid defining shift and mask separately and hand-coding the bit manipulation, use the bitfield macros. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-4-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32: do not mandate cs_gpioAlain Volmat1-6/+0
CS gpios is not mandatory, the driver should allow working even when CS are not given. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-3-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-05spi: stm32: properly handle 0 byte transferAlain Volmat1-0/+4
On 0 byte transfer request, return straight from the xfer function after finalizing the transfer. Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/1612551572-495-2-git-send-email-alain.volmat@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-04Merge series "spi: Add support for Realtek RTL838x/RTL839x SoC SPI" from ↵Mark Brown2-0/+210
Bert Vermeulen <bert@biot.com>: v5: - Changed SoC compatible to list exact models v4: - Added SoC series-specific compatible matches. v3: - Added cpu_relax() to busy loop. - Dropped .remove callback from driver struct. - Use (variations of) realtek-rtl as prefix. - Dropped Kconfig entry, and use MACH_REALTEK_RTL setting to build the driver, since there's no point booting without the SPI-connected flash. v2: - Rewrote from spi-nor driver to regular spi driver, implementing only set_cs() and transfer_one(). (Thanks Chuanhong Guo!) Bert Vermeulen (2): dt-bindings: spi: Realtek RTL838x/RTL839x SPI controller spi: realtek-rtl: Add support for Realtek RTL838x/RTL839x SPI controllers .../bindings/spi/realtek,rtl-spi.yaml | 41 ++++ drivers/spi/Makefile | 1 + drivers/spi/spi-realtek-rtl.c | 209 ++++++++++++++++++ 3 files changed, 251 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/realtek,rtl-spi.yaml create mode 100644 drivers/spi/spi-realtek-rtl.c -- 2.25.1
2021-02-04spi: clps711xx: remove redundant white-spaceJunhao He1-1/+1
Remove redundant white-space, no functional change. Signed-off-by: Junhao He <hejunhao2@hisilicon.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/1612436886-42839-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-04spi: realtek-rtl: Add support for Realtek RTL838x/RTL839x SPI controllersBert Vermeulen2-0/+210
This driver likely also supports earlier (RTL8196) and later (RTL93xx) SoCs. The SPI hardware in these SoCs is specifically intended for connecting NOR bootflash chips, and only used for that in dozens of examined devices. However boiled down to basics, it's really just a half-duplex SPI controller. The hardware appears to have a vestigial second chip-select control, but it hasn't been seen in the wild and is thus not supported. Signed-off-by: Bert Vermeulen <bert@biot.com> Link: https://lore.kernel.org/r/20210120135928.246054-3-bert@biot.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-03spi: spi-synquacer: fix set_cs handlingMasahisa Kojima1-0/+4
When the slave chip select is deasserted, DMSTOP bit must be set. Fixes: b0823ee35cf9 ("spi: Add spi driver for Socionext SynQuacer platform") Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210201073109.9036-1-jassisinghbrar@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-02-02amba: Make the remove callback return voidUwe Kleine-König1-3/+2
All amba drivers return 0 in their remove callback. Together with the driver core ignoring the return value anyhow, it doesn't make sense to return a value here. Change the remove prototype to return void, which makes it explicit that returning an error value doesn't work as expected. This simplifies changing the core remove callback to return void, too. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # for drivers/memory Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> # for hwtracing/coresight Acked-By: Vinod Koul <vkoul@kernel.org> # for dmaengine Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Takashi Iwai <tiwai@suse.de> # for sound Acked-by: Vladimir Zapolskiy <vz@mleia.com> # for memory/pl172 Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2021-02-01spi: fsl: invert spisel_boot signal on MPC8309Rasmus Villemoes1-1/+1
Commit 7a2da5d7960a ("spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode") broke our MPC8309 board by effectively inverting the boolean value passed to fsl_spi_cs_control. The SPISEL_BOOT signal is used as chipselect, but it's not a gpio, so we cannot rely on gpiolib handling the polarity. Adapt to the new world order by inverting the logic here. This does assume that the slave sitting at the SPISEL_BOOT is active low, but should that ever turn out not to be the case, one can create a stub gpiochip driver controlling a single gpio (or rather, a single "spo", special-purpose output). Fixes: 7a2da5d7960a ("spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode") Cc: stable@vger.kernel.org Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Link: https://lore.kernel.org/r/20210130143545.505613-1-rasmus.villemoes@prevas.dk Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-27ACPI: Test for ACPI_SUCCESS rather than !ACPI_FAILUREBjorn Helgaas1-1/+1
The double negative makes it hard to read "if (!ACPI_FAILURE(status))". Replace it with "if (ACPI_SUCCESS(status))". Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-27spi: hisi-sfc-v3xx: add address mode checkYicong Yang1-1/+24
The address mode is either 3 or 4 for the controller, which is configured by the firmware and cannot be modified in the OS driver. Get the firmware configuration and add address mode check in the .supports_op() to block invalid operations. Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Acked-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1611740450-47975-3-git-send-email-yangyicong@hisilicon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-25spidev: Add cisco device compatibleDaniel Walker1-0/+1
Add compatible string for Cisco device present on the Cisco Petra platform. Signed-off-by: Daniel Walker <danielwa@cisco.com> Cc: xe-linux-external@cisco.com Link: https://lore.kernel.org/r/20210121231237.30664-2-danielwa@cisco.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-22spi: spi-au1550: Fix various whitespace warningscorentin1-10/+12
Signed-off-by: corentin <corentin.noel56@gmail.com> Link: https://lore.kernel.org/r/20210122082040.30788-1-corentin.noel.external@stormshield.eu Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-22spi: spi-au1550: quoted string breakcorentin1-6/+5
Signed-off-by: corentin <corentin.noel56@gmail.com> Link: https://lore.kernel.org/r/20210122113052.40429-1-corentin.noel56@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-21spi: remove sirf prima/atlas driverArnd Bergmann3-1244/+0
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Link: https://lore.kernel.org/r/20210120161658.3820610-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-21spi: atmel: Put allocated master before returnPan Bian1-1/+1
The allocated master is not released. Goto error handling label rather than directly return. Fixes: 5e9af37e46bc ("spi: atmel: introduce probe deferring") Signed-off-by: Pan Bian <bianpan2016@163.com> Fixes: 5e9af37e46bc ("spi: atmel: introduce probe deferring") Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20210120050025.25426-1-bianpan2016@163.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-21spi: spi-mpc52xx: Use new structure for SPI transfer delaysSergiu Cuciurean1-1/+3
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org> Link: https://lore.kernel.org/r/20200227143931.20688-1-sergiu.cuciurean@analog.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-21spi: spi-au1550: Add suffix "int" to all "unsigned"corentin1-10/+10
Signed-off-by: corentin <corentin.noel56@gmail.com> Link: https://lore.kernel.org/r/20210121145236.26460-1-corentin.noel.external@stormshield.eu Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-20spi: altera: Fix memory leak on error pathPan Bian1-1/+2
Release master that have been previously allocated if the number of chipselect is invalid. Fixes: 8e04187c1bc7 ("spi: altera: add SPI core parameters support via platform data.") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20210120082635.49304-1-bianpan2016@163.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-20ARM: remove u300 platformArnd Bergmann1-1/+0
The Ericsson U300 platform was one of two ARM929 based SoC platforms for mobile phones in ST-Ericsson after the merger of Ericsson with ST-NXP into ST-Ericsson, the other one being the ST Nomadik. The platform was not widely adopted in Linux based systems and was replaced with the far superior ST-Ericsson U8500 in 2011, but Linus Walleij kept maintaining the code for the whole time. Linus continues to use the Nomadik machine, but decided to drop u300 from the kernel as part of this year's spring cleaning. Thanks for having maintained it all these years. Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/lkml/CACRpkdbJkiHR9FSfJTH_5d_qRU1__dRXHM1TL40iqNRKbGQfrQ@mail.gmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-19spi: imx: Don't print error on -EPROBEDEFERGuido Günther1-1/+1
This avoids [ 0.962538] spi_imx 30820000.spi: bitbang start failed with -517 durig driver probe. Fixes: 8197f489f4c4 ("spi: imx: Fix failure path leak on GPIO request error correctly") Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/0f51ab42e7c7a3452f2f8652794d81584303ea0d.1610987414.git.agx@sigxcpu.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-15Merge series "Remove ARM platform efm32" from Uwe Kleine-König ↵Mark Brown3-470/+0
<u.kleine-koenig@pengutronix.de> Uwe Kleine-König <uwe.kleine-koenig@pengutronix.de>: From: Uwe Kleine-König <uwe.kleine-koenig@pengutronix.de> Hello, there are no known active users of the efm32 platform. Given that the only machine that is supported has only 4 MiB of RAM its use is also quite limited. Back then it served as the platform to develop ARMv7-M support in Linux which was quite fun and still is a blissful memory. Still given that the code serves no purpose and this probably won't change anytime soon, remove all platform support. I'm unsure what to do with the device tree bindings. Should we delete them, too? Best regards Uwe Uwe Kleine-König (7): ARM: drop efm32 platform clk: Drop unused efm32gg driver clocksource: Drop unused efm32 timer code spi: Drop unused efm32 bus driver i2c: Drop unused efm32 bus driver tty: Drop unused efm32 serial driver MAINTAINERS: Remove deleted platform efm32 MAINTAINERS | 7 - arch/arm/Kconfig | 10 +- arch/arm/Kconfig.debug | 17 - arch/arm/Makefile | 1 - arch/arm/boot/dts/Makefile | 2 - arch/arm/boot/dts/efm32gg-dk3750.dts | 88 --- arch/arm/boot/dts/efm32gg.dtsi | 177 ----- arch/arm/configs/efm32_defconfig | 98 --- arch/arm/include/debug/efm32.S | 45 -- arch/arm/mach-efm32/Makefile | 2 - arch/arm/mach-efm32/Makefile.boot | 4 - arch/arm/mach-efm32/dtmachine.c | 16 - arch/arm/mm/Kconfig | 1 - drivers/clk/Makefile | 1 - drivers/clk/clk-efm32gg.c | 84 --- drivers/clocksource/Kconfig | 9 - drivers/clocksource/Makefile | 1 - drivers/clocksource/timer-efm32.c | 278 -------- drivers/i2c/busses/Kconfig | 7 - drivers/i2c/busses/Makefile | 1 - drivers/i2c/busses/i2c-efm32.c | 469 ------------- drivers/spi/Kconfig | 7 - drivers/spi/Makefile | 1 - drivers/spi/spi-efm32.c | 462 ------------ drivers/tty/serial/Kconfig | 13 - drivers/tty/serial/Makefile | 1 - drivers/tty/serial/efm32-uart.c | 852 ----------------------- include/linux/platform_data/efm32-spi.h | 15 - include/linux/platform_data/efm32-uart.h | 19 - include/uapi/linux/serial_core.h | 3 - 30 files changed, 1 insertion(+), 2690 deletions(-) delete mode 100644 arch/arm/boot/dts/efm32gg-dk3750.dts delete mode 100644 arch/arm/boot/dts/efm32gg.dtsi delete mode 100644 arch/arm/configs/efm32_defconfig delete mode 100644 arch/arm/include/debug/efm32.S delete mode 100644 arch/arm/mach-efm32/Makefile delete mode 100644 arch/arm/mach-efm32/Makefile.boot delete mode 100644 arch/arm/mach-efm32/dtmachine.c delete mode 100644 drivers/clk/clk-efm32gg.c delete mode 100644 drivers/clocksource/timer-efm32.c delete mode 100644 drivers/i2c/busses/i2c-efm32.c delete mode 100644 drivers/spi/spi-efm32.c delete mode 100644 drivers/tty/serial/efm32-uart.c delete mode 100644 include/linux/platform_data/efm32-spi.h delete mode 100644 include/linux/platform_data/efm32-uart.h base-commit: 5c8fe583cce542aa0b84adc939ce85293de36e5e -- 2.29.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2021-01-15spi: Drop unused efm32 bus driverUwe Kleine-König3-470/+0
Support for this machine was just removed, so drop the now unused spi bus driver, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210114151630.128830-5-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-15spi: cadence: cache reference clock rate during probeMichael Hennerich1-2/+4
The issue is that using SPI from a callback under the CCF lock will deadlock, since this code uses clk_get_rate(). Fixes: c474b38665463 ("spi: Add driver for Cadence SPI controller") Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210114154217.51996-1-alexandru.ardelean@analog.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-14spi: pxa2xx: Add support for Intel Alder Lake PCH-PJarkko Nikula1-0/+4
Add support for LPSS SPI on Intel Alder Lake PCH-P variant. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20210114144021.1820262-1-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-14spi: bcm2835aux: Call the dedicated transfer completion function.Vincent Pelletier1-1/+1
spi_finalize_current_transfer currently only calls "complete", so no functional change is expected. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Link: https://lore.kernel.org/r/2636096a3b40febf680f9fff33944a5480561df9.1610062884.git.plr.vincent@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>