summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)AuthorFilesLines
2021-06-03spi: stm32-qspi: Always wait BUSY bit to be cleared in stm32_qspi_wait_cmd()Patrice Chotard1-1/+4
In U-boot side, an issue has been encountered when QSPI source clock is running at low frequency (24 MHz for example), waiting for TCF bit to be set didn't ensure that all data has been send out the FIFO, we should also wait that BUSY bit is cleared. To prevent similar issue in kernel driver, we implement similar behavior by always waiting BUSY bit to be cleared. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210603073421.8441-1-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-02spi: spi-zynq-qspi: Fix some wrong goto jumps & missing error codezpershuai1-3/+4
In zynq_qspi_probe function, when enable the device clock is done, the return of all the functions should goto the clk_dis_all label. If num_cs is not right then this should return a negative error code but currently it returns success. Signed-off-by: zpershuai <zpershuai@gmail.com> Link: https://lore.kernel.org/r/1622110857-21812-1-git-send-email-zpershuai@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-01spi: Cleanup on failure of initial setupLukas Wunner5-19/+54
Commit c7299fea6769 ("spi: Fix spi device unregister flow") changed the SPI core's behavior if the ->setup() hook returns an error upon adding an spi_device: Before, the ->cleanup() hook was invoked to free any allocations that were made by ->setup(). With the commit, that's no longer the case, so the ->setup() hook is expected to free the allocations itself. I've identified 5 drivers which depend on the old behavior and am fixing them up hereinafter: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c spi-omap2-mcspi.c spi-pxa2xx.c Importantly, ->setup() is not only invoked on spi_device *addition*: It may subsequently be called to *change* SPI parameters. If changing these SPI parameters fails, freeing memory allocations would be wrong. That should only be done if the spi_device is finally destroyed. I am therefore using a bool "initial_setup" in 4 of the affected drivers to differentiate between the invocation on *adding* the spi_device and any subsequent invocations: spi-bitbang.c spi-fsl-spi.c spi-omap-uwire.c spi-omap2-mcspi.c In spi-pxa2xx.c, it seems the ->setup() hook can only fail on spi_device addition, not any subsequent calls. It therefore doesn't need the bool. It's worth noting that 5 other drivers already perform a cleanup if the ->setup() hook fails. Before c7299fea6769, they caused a double-free if ->setup() failed on spi_device addition. Since the commit, they're fine. These drivers are: spi-mpc512x-psc.c spi-pl022.c spi-s3c64xx.c spi-st-ssc4.c spi-tegra114.c (spi-pxa2xx.c also already performs a cleanup, but only in one of several error paths.) Fixes: c7299fea6769 ("spi: Fix spi device unregister flow") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: Saravana Kannan <saravanak@google.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # pxa2xx Link: https://lore.kernel.org/r/f76a0599469f265b69c371538794101fa37b5536.1622149321.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-24spi: bcm2835: Fix out-of-bounds access with more than 4 slavesLukas Wunner1-2/+8
Commit 571e31fa60b3 ("spi: bcm2835: Cache CS register value for ->prepare_message()") limited the number of slaves to 3 at compile-time. The limitation was necessitated by a statically-sized array prepare_cs[] in the driver private data which contains a per-slave register value. The commit sought to enforce the limitation at run-time by setting the controller's num_chipselect to 3: Slaves with a higher chipselect are rejected by spi_add_device(). However the commit neglected that num_chipselect only limits the number of *native* chipselects. If GPIO chipselects are specified in the device tree for more than 3 slaves, num_chipselect is silently raised by of_spi_get_gpio_numbers() and the result are out-of-bounds accesses to the statically-sized array prepare_cs[]. As a bandaid fix which is backportable to stable, raise the number of allowed slaves to 24 (which "ought to be enough for anybody"), enforce the limitation on slave ->setup and revert num_chipselect to 3 (which is the number of native chipselects supported by the controller). An upcoming for-next commit will allow an arbitrary number of slaves. Fixes: 571e31fa60b3 ("spi: bcm2835: Cache CS register value for ->prepare_message()") Reported-by: Joe Burmeister <joe.burmeister@devtank.co.uk> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v5.4+ Cc: Phil Elwell <phil@raspberrypi.com> Link: https://lore.kernel.org/r/75854affc1923309fde05e47494263bde73e5592.1621703210.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-21spi: sc18is602: implement .max_{transfer,message}_size() for the controllerVladimir Oltean1-0/+7
Allow SPI peripherals attached to this controller to know what is the maximum transfer size and message size, so they can limit their transfer lengths properly in case they are otherwise capable of larger transfer sizes. For the sc18is602, this is 200 bytes in both cases, since as far as I understand, it isn't possible to tell the controller to keep the chip select asserted after the STOP command is sent. The controller can support SPI messages larger than 200 bytes if cs_change is set for individual transfers such that the portions with chip select asserted are never longer than 200 bytes. What is not supported is just SPI messages with a continuous chip select larger than 200. I don't think it is possible to express this using the current API, so drivers which do send SPI messages with cs_change can safely just look at the max_transfer_size limit. An example of user for this is sja1105_xfer() in drivers/net/dsa/sja1105/sja1105_spi.c which sends by default 64 * 4 = 256 byte transfers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210520131238.2903024-3-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-21spi: sc18is602: don't consider the chip select byte in sc18is602_check_transferVladimir Oltean1-1/+1
For each spi_message, the sc18is602 I2C-to-SPI bridge driver checks the length of each spi_transfer against 200 (the size of the chip's internal buffer) minus hw->tlen (the number of bytes transferred so far). The first byte of the transferred data is the Function ID (the SPI slave's chip select) and as per the documentation of the chip: https://www.nxp.com/docs/en/data-sheet/SC18IS602B.pdf the data buffer is up to 200 bytes deep _without_ accounting for the Function ID byte. However, in sc18is602_txrx(), the driver keeps the Function ID as part of the buffer, and increments hw->tlen from 0 to 1. Combined with the check in sc18is602_check_transfer, this prevents us from issuing a transfer that has exactly 200 bytes in size, but only 199. Adjust the check function to reflect that the Function ID is not part of the 200 byte deep data buffer. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210520131238.2903024-2-olteanv@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-18Merge tag 'v5.13-rc2' into spi-5.13Mark Brown5-27/+16
Linux 5.13-rc2
2021-05-14spi: Don't have controller clean up spi device before driver unbindSaravana Kannan1-3/+3
When a spi device is unregistered and triggers a driver unbind, the driver might need to access the spi device. So, don't have the controller clean up the spi device before the driver is unbound. Clean up the spi device after the driver is unbound. Fixes: c7299fea6769 ("spi: Fix spi device unregister flow") Reported-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Saravana Kannan <saravanak@google.com> Tested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210505164734.175546-1-saravanak@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-12spi: Assume GPIO CS active high in ACPI caseAndy Shevchenko1-4/+18
Currently GPIO CS handling, when descriptors are in use, doesn't take into consideration that in ACPI case the default polarity is Active High and can't be altered. Instead we have to use the per-chip definition provided by SPISerialBus() resource. Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors") Cc: Liguang Zhang <zhangliguang@linux.alibaba.com> Cc: Jay Fang <f.fangjian@huawei.com> Cc: Sven Van Asbroeck <thesven73@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Xin Hao <xhao@linux.alibaba.com> Link: https://lore.kernel.org/r/20210511140912.30757-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-12spi: sprd: Add missing MODULE_DEVICE_TABLEChunyan Zhang1-0/+1
MODULE_DEVICE_TABLE is used to extract the device information out of the driver and builds a table when being compiled. If using this macro, kernel can find the driver if available when the device is plugged in, and then loads that driver and initializes the device. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20210512093534.243040-1-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-10spi: take the SPI IO-mutex in the spi_set_cs_timing methodLeilk Liu1-2/+7
this patch takes the io_mutex to prevent an unprotected HW register modification in the set_cs_timing callback. Fixes: 4cea6b8cc34e ("spi: add power control when set_cs_timing") Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> Link: https://lore.kernel.org/r/20210508060214.1485-1-leilk.liu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-10spi: spi-fsl-dspi: Fix a resource leak in an error handling pathChristophe JAILLET1-1/+3
'dspi_request_dma()' should be undone by a 'dspi_release_dma()' call in the error handling path of the probe function, as already done in the remove function Fixes: 90ba37033cb9 ("spi: spi-fsl-dspi: Add DMA support for Vybrid") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/d51caaac747277a1099ba8dea07acd85435b857e.1620587472.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-30Merge tag 'sound-5.13-rc1' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "No surprises in this development cycle, and most of work is about the fixes and the improvements of the existing code, while a new LED control layer and a few new drivers have been introduced. Here are some highlights: Core: - A common mute-LED framework was introduced. It is used by HD-audio for now, more adaption will follow later. The former "Mic Mute-LED Mode" mixer control has been replaced with the corresponding sysfs now. - User-control management was changed to count consumed bytes instead of capping by number of elements; this will allow more controls in the normal usage pattern while avoiding the possible memory exhaustion DoS ASoC: - Continued refactoring and cleanups in ASoC core and generic card drivers - Wide range of small cppcheck and warning fixes - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358 accessory detection, and Realtek RT1019, RT1316, RT711 and RT715 USB-audio: - Continued improvements and fixes of the implicit feedback mode, including better support for Pioneer and Roland/BOSS devices HD-audio: - Default back to non-buffer preallocation on x86 - Cirrus codec improvements, more quirks for Realtek codecs Others: - New virtio sound driver - FireWire Bebob updates" * tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits) ALSA: hda/conexant: Re-order CX5066 quirk table entries ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices ALSA: hda/realtek: Re-order ALC662 quirk table entries ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries ALSA: hda/realtek: Re-order ALC269 HP quirk table entries ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries ALSA: usb-audio: Remove redundant assignment to len ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx ALSA: virtio: fix kernel-doc ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB ALSA: sb: Fix two use after free in snd_sb_qsound_build ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer ...
2021-04-29spi: spi-zynq-qspi: Fix stack violation bugKaren Dombroski1-4/+3
When the number of bytes for the op is greater than one, the read could run off the end of the function stack and cause a crash. This patch restores the behaviour of safely reading out of the original opcode location. Signed-off-by: Karen Dombroski <karen.dombroski@marsbioimaging.com> Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Link: https://lore.kernel.org/r/20210429053802.17650-3-amit.kumar-mahapatra@xilinx.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-29spi: spi-zynq-qspi: Fix kernel-doc warningAmit Kumar Mahapatra1-1/+1
Fix kernel-doc warning. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Link: https://lore.kernel.org/r/20210429053802.17650-2-amit.kumar-mahapatra@xilinx.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-28spi: altera: Make SPI_ALTERA_CORE invisibleGeert Uytterhoeven1-1/+1
The SPI_ALTERA_CORE config symbol controls compilation of the Altera SPI Controller core code. It is already selected by all of its users, so there is no reason to make it visible, unless compile-testing. Fixes: b0c3d9354de1f87e ("spi: altera: separate core code from platform code") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/f0cb8e66baba4506db6f42fca74dc51b76883507.1619534253.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-28spi: Fix spi device unregister flowSaravana Kannan1-6/+12
When an SPI device is unregistered, the spi->controller->cleanup() is called in the device's release callback. That's wrong for a couple of reasons: 1. spi_dev_put() can be called before spi_add_device() is called. And it's spi_add_device() that calls spi_setup(). This will cause clean() to get called without the spi device ever being setup. 2. There's no guarantee that the controller's driver would be present by the time the spi device's release function gets called. 3. It also causes "sleeping in atomic context" stack dump[1] when device link deletion code does a put_device() on the spi device. Fix these issues by simply moving the cleanup from the device release callback to the actual spi_unregister_device() function. [1] - https://lore.kernel.org/lkml/CAHp75Vc=FCGcUyS0v6fnxme2YJ+qD+Y-hQDQLa2JhWNON9VmsQ@mail.gmail.com/ Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210426235638.1285530-1-saravanak@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-27Merge tag 'cfi-v5.13-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull CFI on arm64 support from Kees Cook: "This builds on last cycle's LTO work, and allows the arm64 kernels to be built with Clang's Control Flow Integrity feature. This feature has happily lived in Android kernels for almost 3 years[1], so I'm excited to have it ready for upstream. The wide diffstat is mainly due to the treewide fixing of mismatched list_sort prototypes. Other things in core kernel are to address various CFI corner cases. The largest code portion is the CFI runtime implementation itself (which will be shared by all architectures implementing support for CFI). The arm64 pieces are Acked by arm64 maintainers rather than coming through the arm64 tree since carrying this tree over there was going to be awkward. CFI support for x86 is still under development, but is pretty close. There are a handful of corner cases on x86 that need some improvements to Clang and objtool, but otherwise works well. Summary: - Clean up list_sort prototypes (Sami Tolvanen) - Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)" * tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arm64: allow CONFIG_CFI_CLANG to be selected KVM: arm64: Disable CFI for nVHE arm64: ftrace: use function_nocfi for ftrace_call arm64: add __nocfi to __apply_alternatives arm64: add __nocfi to functions that jump to a physical address arm64: use function_nocfi with __pa_symbol arm64: implement function_nocfi psci: use function_nocfi for cpu_resume lkdtm: use function_nocfi treewide: Change list_sort to use const pointers bpf: disable CFI in dispatcher functions kallsyms: strip ThinLTO hashes from static functions kthread: use WARN_ON_FUNCTION_MISMATCH workqueue: use WARN_ON_FUNCTION_MISMATCH module: ensure __cfi_check alignment mm: add generic function_nocfi macro cfi: add __cficanonical add support for Clang CFI
2021-04-27Merge tag 'spi-v5.13' of ↵Linus Torvalds49-632/+1488
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The only core work for SPI this time around is the completion of the conversion to the new style method for specifying transfer delays, meaning we can cope with what most controllers support more directly using conversions in the core rather than open coding in drivers. Otherwise it's a good stack of cleanups and fixes plus a few new drivers. Summary: - Completion of the conversion to new style transfer delay configuration - Introduction and use of module_parport_driver() helper, merged here as there's no parport tree - Support for Altera SoCs on DFL buses, NXP i.MX8DL, HiSilicon Kunpeng, MediaTek MT8195" * tag 'spi-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (113 commits) spi: Rename enable1 to activate in spi_set_cs() spi: Convert Freescale QSPI binding to json schema spi: stm32-qspi: fix debug format string spi: tools: make a symbolic link to the header file spi.h spi: fsi: add a missing of_node_put spi: Make error handling of gpiod_count() call cleaner spidev: Add Micron SPI NOR Authenta device compatible spi: brcm,spi-bcm-qspi: convert to the json-schema spi: altera: Add DFL bus driver for Altera API Controller spi: altera: separate core code from platform code spi: stm32-qspi: Fix compilation warning in ARM64 spi: Handle SPI device setup callback failure. spi: sync up initial chipselect state spi: stm32-qspi: Add dirmap support spi: stm32-qspi: Trigger DMA only if more than 4 bytes to transfer spi: stm32-qspi: fix pm_runtime usage_count counter spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op spi: spi-zynqmp-gqspi: Resolved slab-out-of-bounds bug spi: spi-zynqmp-gqspi: fix hang issue when suspend/resume ...
2021-04-23spi: Rename enable1 to activate in spi_set_cs()Andy Shevchenko1-5/+4
The enable1 is confusing name. Change it to clearly show what is the intention behind it. No functional changes. Fixes: 25093bdeb6bc ("spi: implement SW control for CS times") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210420131846.75983-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-22spi: stm32-qspi: fix debug format stringArnd Bergmann1-1/+1
Printing size_t needs a special %zx format modifier to avoid a warning like: drivers/spi/spi-stm32-qspi.c:481:41: note: format string is defined here 481 | dev_dbg(qspi->dev, "%s len = 0x%x offs = 0x%llx buf = 0x%p\n", __func__, len, offs, buf); Patrice already tried to fix this, but picked %lx instead of %zx, which fixed some architectures but broke others in the same way. Using %zx works everywhere. Fixes: 18674dee3cd6 ("spi: stm32-qspi: Add dirmap support") Fixes: 1b8a7d4282c0 ("spi: stm32-qspi: Fix compilation warning in ARM64") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210422134955.1988316-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21spi: fsi: add a missing of_node_putChristophe JAILLET1-1/+3
'for_each_available_child_of_node' performs an of_node_get on each iteration, so a return from the middle of the loop requires an of_node_put. Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/504e431b900341249d331b868d90312cf41f415a.1618947919.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-21spi: Make error handling of gpiod_count() call cleanerAndy Shevchenko1-6/+7
Each time we call spi_get_gpio_descs() the num_chipselect is overwritten either by new value or by the old one. This is an extra operation in case gpiod_count() returns an error. Besides that it slashes the error handling of gpiod_count(). Refactor the code to make error handling of gpiod_count() call cleaner. Note, that gpiod_count() never returns 0, take this into account as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210420164040.40055-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20Merge series "spi: altera: Add DFL bus support for Altera SPI" from ↵Mark Brown5-163/+401
matthew.gerlach@linux.intel.com Matthew Gerlach <matthew.gerlach@linux.intel.com>: From: Matthew Gerlach <matthew.gerlach@linux.intel.com> This patch set adds Device Feature List (DFL) bus support for the Altera SPI Master controller. Patch 1 separates spi-altera.c into spi-altera-core.c and spi-altera-platform.c. Patch 2 adds spi-altera-dfl.c. Matthew Gerlach (2): spi: altera: separate core code from platform code spi: altera: Add DFL bus driver for Altera API Controller drivers/spi/Kconfig | 18 +- drivers/spi/Makefile | 4 +- drivers/spi/spi-altera-core.c | 222 ++++++++++++++++++++++ drivers/spi/spi-altera-dfl.c | 204 ++++++++++++++++++++ drivers/spi/spi-altera-platform.c | 172 +++++++++++++++++ drivers/spi/spi-altera.c | 378 -------------------------------------- include/linux/spi/altera.h | 21 +++ 7 files changed, 639 insertions(+), 380 deletions(-) create mode 100644 drivers/spi/spi-altera-core.c create mode 100644 drivers/spi/spi-altera-dfl.c create mode 100644 drivers/spi/spi-altera-platform.c delete mode 100644 drivers/spi/spi-altera.c -- 1.8.3.1
2021-04-20spidev: Add Micron SPI NOR Authenta device compatibleShivamurthy Shastri1-0/+1
Add compatible string for Micron SPI NOR Authenta device. Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com> Link: https://lore.kernel.org/r/20210419204015.1769-1-sshivamurthy@micron.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20spi: altera: Add DFL bus driver for Altera API ControllerMatthew Gerlach3-0/+214
This patch adds a Device Feature List (DFL) bus driver for the Altera SPI Master controller. The SPI master is connected to an Intel SPI Slave to Avalon Bridge inside an Intel MAX10 BMC Chip. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Link: https://lore.kernel.org/r/20210416165720.554144-3-matthew.gerlach@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20spi: altera: separate core code from platform codeMatthew Gerlach4-163/+187
In preparation of adding support for a new bus type, separate the core spi-altera code from the platform driver code. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Link: https://lore.kernel.org/r/20210416165720.554144-2-matthew.gerlach@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-20spi: stm32-qspi: Fix compilation warning in ARM64Patrice Chotard1-1/+1
This fixes warnings detected when compiling in ARM64. Introduced by 'commit 18674dee3cd6 ("spi: stm32-qspi: Add dirmap support")' Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210420082103.1693-1-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-19Merge series "spi: stm32-qspi: Fix and update" from ↵Mark Brown1-22/+84
<patrice.chotard@foss.st.com> Patrice Chotard <patrice.chotard@foss.st.com>: From: Patrice Chotard <patrice.chotard@foss.st.com> Christophe Kerello (1): spi: stm32-qspi: fix pm_runtime usage_count counter Patrice Chotard (2): spi: stm32-qspi: Trigger DMA only if more than 4 bytes to transfer spi: stm32-qspi: Add dirmap support drivers/spi/spi-stm32-qspi.c | 106 +++++++++++++++++++++++++++-------- 1 file changed, 84 insertions(+), 22 deletions(-) -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
2021-04-19spi: Handle SPI device setup callback failure.Joe Burmeister1-1/+8
If the setup callback failed, but the controller has auto_runtime_pm and set_cs, the setup failure could be missed. Signed-off-by: Joe Burmeister <joe.burmeister@devtank.co.uk> Link: https://lore.kernel.org/r/20210419130631.4586-1-joe.burmeister@devtank.co.uk Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-19spi: sync up initial chipselect stateDavid Bauer1-8/+8
When initially probing the SPI slave device, the call for disabling an SPI device without the SPI_CS_HIGH flag is not applied, as the condition for checking whether or not the state to be applied equals the one currently set evaluates to true. This however might not necessarily be the case, as the chipselect might be active. Add a force flag to spi_set_cs which allows to override this early exit condition. Set it to false everywhere except when called from spi_setup to sync up the initial CS state. Fixes commit d40f0b6f2e21 ("spi: Avoid setting the chip select if we don't need to") Signed-off-by: David Bauer <mail@david-bauer.net> Link: https://lore.kernel.org/r/20210416195956.121811-1-mail@david-bauer.net Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-19spi: stm32-qspi: Add dirmap supportPatrice Chotard1-16/+67
Add stm32_qspi_dirmap_read() and stm32_qspi_dirmap_create() to get dirmap support. Update the exec_op callback which doens't allow anymore memory map access. Memory map access are only available through the dirmap_read callback. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210419121541.11617-4-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-19spi: stm32-qspi: Trigger DMA only if more than 4 bytes to transferPatrice Chotard1-2/+3
In order to optimize accesses to spi flashes, trigger a DMA only if more than 4 bytes has to be transferred. DMA transfer preparation's cost becomes negligible above 4 bytes to transfer. Below this threshold, indirect transfer give more throughput. mtd_speedtest shows that page write throughtput increases : - from 779 to 853 KiB/s (~9.5%) with s25fl512s SPI-NOR. - from 5283 to 5666 KiB/s (~7.25%) with Micron SPI-NAND. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Link: https://lore.kernel.org/r/20210419121541.11617-3-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-19spi: stm32-qspi: fix pm_runtime usage_count counterChristophe Kerello1-4/+14
pm_runtime usage_count counter is not well managed. pm_runtime_put_autosuspend callback drops the usage_counter but this one has never been increased. Add pm_runtime_get_sync callback to bump up the usage counter. It is also needed to use pm_runtime_force_suspend and pm_runtime_force_resume APIs to handle properly the clock. Fixes: 9d282c17b023 ("spi: stm32-qspi: Add pm_runtime support") Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210419121541.11617-2-patrice.chotard@foss.st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-16spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single failsQuanyang Wang1-6/+20
The spi controller supports 44-bit address space on AXI in DMA mode, so set dma_addr_t width to 44-bit to avoid using a swiotlb mapping. In addition, if dma_map_single fails, it should return immediately instead of continuing doing the DMA operation which bases on invalid address. This fixes the following crash which occurs in reading a big block from flash: [ 123.633577] zynqmp-qspi ff0f0000.spi: swiotlb buffer is full (sz: 4194304 bytes), total 32768 (slots), used 0 (slots) [ 123.644230] zynqmp-qspi ff0f0000.spi: ERR:rxdma:memory not mapped [ 123.784625] Unable to handle kernel paging request at virtual address 00000000003fffc0 [ 123.792536] Mem abort info: [ 123.795313] ESR = 0x96000145 [ 123.798351] EC = 0x25: DABT (current EL), IL = 32 bits [ 123.803655] SET = 0, FnV = 0 [ 123.806693] EA = 0, S1PTW = 0 [ 123.809818] Data abort info: [ 123.812683] ISV = 0, ISS = 0x00000145 [ 123.816503] CM = 1, WnR = 1 [ 123.819455] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000805047000 [ 123.825887] [00000000003fffc0] pgd=0000000803b45003, p4d=0000000803b45003, pud=0000000000000000 [ 123.834586] Internal error: Oops: 96000145 [#1] PREEMPT SMP Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20210416004652.2975446-6-quanyang.wang@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-16spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_opQuanyang Wang1-10/+4
When handling op->addr, it is using the buffer "tmpbuf" which has been freed. This will trigger a use-after-free KASAN warning. Let's use temporary variables to store op->addr.val and op->cmd.opcode to fix this issue. Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20210416004652.2975446-5-quanyang.wang@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-16spi: spi-zynqmp-gqspi: Resolved slab-out-of-bounds bugAmit Kumar Mahapatra1-4/+6
During a transfer the driver filled the fifo with 4bytes, even if the data that needs to be transfer is less that 4bytes. This resulted in slab-out-of-bounds bug in KernelAddressSanitizer. This patch resolves slab-out-of-bounds bug by filling the fifo with the number of bytes that needs to transferred. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Link: https://lore.kernel.org/r/20210416004652.2975446-4-quanyang.wang@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-16spi: spi-zynqmp-gqspi: fix hang issue when suspend/resumeQuanyang Wang1-6/+14
After calling platform_set_drvdata(pdev, xqspi) in probe, the return value of dev_get_drvdata(dev) is a pointer to struct zynqmp_qspi but not struct spi_controller. A wrong structure type passing to the functions spi_controller_suspend/resume will hang the system. And we should check the return value of spi_controller_suspend, if an error is returned, return it to PM subsystem to stop suspend. Also, GQSPI_EN_MASK should be written to GQSPI_EN_OFST to enable the spi controller in zynqmp_qspi_resume since it was disabled in zynqmp_qspi_suspend before. Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20210416004652.2975446-3-quanyang.wang@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-16spi: spi-zynqmp-gqspi: fix clk_enable/disable imbalance issueQuanyang Wang1-39/+8
The clks "pclk" and "ref_clk" are enabled twice during the probe. The first time is in the function zynqmp_qspi_probe and the second time is in zynqmp_qspi_setup_op which is called by devm_spi_register_controller. Then calling zynqmp_qspi_remove (rmmod this module) to disable these clks will trigger a warning as below: [ 309.124604] Unpreparing enabled qspi_ref [ 309.128641] WARNING: CPU: 1 PID: 537 at drivers/clk/clk.c:824 clk_core_unprepare+0x108/0x110 Since pm_runtime works now, clks can be enabled/disabled by calling zynqmp_runtime_suspend/resume. So we don't need to enable these clks explicitly in zynqmp_qspi_setup_op. Remove them to fix this issue. And remove clk enabling/disabling in zynqmp_qspi_resume because there is no spi transfer operation so enabling ref_clk is redundant meanwhile pclk is not disabled for it is shared with other peripherals. Furthermore replace clk_enable/disable with clk_prepare_enable and clk_disable_unprepare in runtime_suspend/resume functions. Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20210416004652.2975446-2-quanyang.wang@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-15Merge branch 'for-5.12' of ↵Mark Brown3-8/+8
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.13
2021-04-15spi: spi-zynqmp-gqspi: Fix runtime PM imbalance in zynqmp_qspi_probeDinghao Liu1-2/+12
There is a PM usage counter decrement after zynqmp_qspi_init_hw() without any refcount increment, which leads to refcount leak.Add a refcount increment to balance the refcount. Also set auto_runtime_pm to resume suspended spi controller. Fixes: 9e3a000362aec ("spi: zynqmp: Add pm runtime support") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Tested-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20210415074644.24646-1-dinghao.liu@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-15spi: s3c64xx: constify driver/match dataKrzysztof Kozlowski1-11/+10
The match data (struct s3c64xx_spi_port_config) stored in of_device_id and platform_device_id tables is not modified by the driver and can be handled entirely in a const-way to increase the code safety. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Link: https://lore.kernel.org/r/20210414203343.203119-3-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-15spi: s3c64xx: correct kerneldoc of s3c64xx_spi_port_configKrzysztof Kozlowski1-1/+1
Correct the name of s3c64xx_spi_port_config structure in kerneldoc: drivers/spi/spi-s3c64xx.c:154: warning: expecting prototype for struct s3c64xx_spi_info. Prototype was for struct s3c64xx_spi_port_config instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Link: https://lore.kernel.org/r/20210414203343.203119-2-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-15spi: s3c64xx: simplify getting of_device_id match dataKrzysztof Kozlowski1-7/+3
Use of_device_get_match_data() to make the code slightly smaller and to remove the of_device_id table forward declaration. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Sylwester Nawrocki <snawrocki@kernel.org> Link: https://lore.kernel.org/r/20210414203343.203119-1-krzysztof.kozlowski@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-15spi: pxa2xx: Add support for Intel Alder Lake PCH-MJarkko Nikula1-0/+4
Add support for LPSS SPI on Intel Alder Lake PCH-M. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20210415135917.54144-1-jarkko.nikula@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-12Merge series "Minor updates for hisi-sfc-v3xx" from Yicong Yang ↵Mark Brown1-4/+3
<yangyicong@hisilicon.com>: This series fix a potential interrupt race condition and cleanup the ACPI protection for the driver. Change since v1: - reword the commit in patch #2 Link: https://lore.kernel.org/linux-spi/1617881505-51552-1-git-send-email-yangyicong@hisilicon.com/ Yicong Yang (2): spi: hisi-sfc-v3xx: fix potential irq race condition spi: hisi-sfc-v3xx: drop unnecessary ACPI_PTR and related ifendif protection drivers/spi/spi-hisi-sfc-v3xx.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) -- 2.8.1
2021-04-12spi: spi-zynqmp-gqspi: Fix missing unlock on error in zynqmp_qspi_exec_op()Wei Yongjun1-1/+3
Add the missing unlock before return from function zynqmp_qspi_exec_op() in the error handling case. Fixes: a0f65be6e880 ("spi: spi-zynqmp-gqspi: add mutex locking for exec_op") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20210412160025.194171-1-weiyongjun1@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-12spi: hisi-sfc-v3xx: drop unnecessary ACPI_PTR and related ifendif protectionYicong Yang1-4/+2
We use ACPI_PTR() and related ifendif protection for the id table. This is unnecessary as the struct acpi_device_id is defined in mod_devicetable.h and doesn't rely on ACPI. The driver doesn't use any ACPI apis, so it can be compiled in the ACPI=n case with no warnings. So remove the ACPI_PTR and related ifendif protection, also replace the header acpi.h with mod_devicetable.h. Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/1618228708-37949-3-git-send-email-yangyicong@hisilicon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-12spi: hisi-sfc-v3xx: fix potential irq race conditionYicong Yang1-0/+1
We mask the irq when the command completion is timeout. This won't stop the already running irq handler. Use sychronize_irq() after we mask the irq, to make sure there is no running handler. Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Link: https://lore.kernel.org/r/1618228708-37949-2-git-send-email-yangyicong@hisilicon.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-12Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki2-23/+11
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull OPP (Operating Performance Points) framework updates for v5.13 from Viresh Kumar: "This adds devm variants for OPP APIs and updates few of the users as well (Yangtao Li and Dmitry Osipenko)." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: memory: samsung: exynos5422-dmc: Convert to use resource-managed OPP API drm/panfrost: Convert to use resource-managed OPP API drm/lima: Convert to use resource-managed OPP API mmc: sdhci-msm: Convert to use resource-managed OPP API spi: spi-qcom-qspi: Convert to use resource-managed OPP API spi: spi-geni-qcom: Convert to use resource-managed OPP API serial: qcom_geni_serial: Convert to use resource-managed OPP API opp: Change return type of devm_pm_opp_attach_genpd() opp: Change return type of devm_pm_opp_register_set_opp_helper() opp: Add devres wrapper for dev_pm_opp_of_add_table opp: Add devres wrapper for dev_pm_opp_set_supported_hw opp: Add devres wrapper for dev_pm_opp_set_regulators opp: Add devres wrapper for dev_pm_opp_set_clkname
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-17 21:01:32 +0300