summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)AuthorFilesLines
2021-09-02Merge tag 'drivers-5.15' of ↵Linus Torvalds1-6/+35
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...
2021-09-01Merge tag 'driver-core-5.15-rc1' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core patches for 5.15-rc1. These do change a number of different things across different subsystems, and because of that, there were 2 stable tags created that might have already come into your tree from different pulls that did the following - changed the bus remove callback to return void - sysfs iomem_get_mapping rework Other than those two things, there's only a few small things in here: - kernfs performance improvements for huge numbers of sysfs users at once - tiny api cleanups - other minor changes All of these have been in linux-next for a while with no reported problems, other than the before-mentioned merge issue" * tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits) MAINTAINERS: Add dri-devel for component.[hc] driver core: platform: Remove platform_device_add_properties() ARM: tegra: paz00: Handle device properties with software node API bitmap: extend comment to bitmap_print_bitmask/list_to_buf drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI topology: use bin_attribute to break the size limitation of cpumap ABI lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list sysfs: Rename struct bin_attribute member to f_mapping sysfs: Invoke iomem_get_mapping() from the sysfs open callback debugfs: Return error during {full/open}_proxy_open() on rmmod zorro: Drop useless (and hardly used) .driver member in struct zorro_dev zorro: Simplify remove callback sh: superhyway: Simplify check in remove callback nubus: Simplify check in remove callback nubus: Make struct nubus_driver::remove return void kernfs: dont call d_splice_alias() under kernfs node lock kernfs: use i_lock to protect concurrent inode updates kernfs: switch kernfs to use an rwsem kernfs: use VFS negative dentry caching ...
2021-09-01Merge tag 'char-misc-5.15-rc1' of ↵Linus Torvalds2-10/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char/misc driver changes for 5.15-rc1. Lots of different driver subsystems are being updated in here, notably: - mhi subsystem update - fpga subsystem update - coresight/hwtracing subsystem update - interconnect subsystem update - nvmem subsystem update - parport drivers update - phy subsystem update - soundwire subsystem update and there are some other char/misc drivers being updated as well: - binder driver additions - new misc drivers - lkdtm driver updates - mei driver updates - sram driver updates - other minor driver updates. Note, there are no habanalabs driver updates in this pull request, that will probably come later before -rc1 is out in a different request. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits) Revert "bus: mhi: Add inbound buffers allocation flag" misc/pvpanic: fix set driver data VMCI: fix NULL pointer dereference when unmapping queue pair char: mware: fix returnvar.cocci warnings parport: remove non-zero check on count soundwire: cadence: do not extend reset delay soundwire: intel: conditionally exit clock stop mode on system suspend soundwire: intel: skip suspend/resume/wake when link was not started soundwire: intel: fix potential race condition during power down phy: qcom-qmp: Add support for SM6115 UFS phy dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings phy: qmp: Provide unique clock names for DP clocks lkdtm: remove IDE_CORE_CP crashpoint lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ coresight: Replace deprecated CPU-hotplug functions. Documentation: coresight: Add documentation for CoreSight config coresight: syscfg: Add initial configfs support coresight: config: Add preloaded configurations coresight: etm4x: Add complex configuration handlers to etmv4 coresight: etm-perf: Update to activate selected configuration ...
2021-08-26Merge remote-tracking branch 'spi/for-5.15' into spi-nextMark Brown19-438/+1176
2021-08-26Merge remote-tracking branch 'spi/for-5.14' into spi-linusMark Brown3-14/+18
2021-08-26spi: spi-zynq-qspi: use wait_for_completion_timeout to make ↵Quanyang Wang1-4/+4
zynq_qspi_exec_mem_op not interruptible The function wait_for_completion_interruptible_timeout will return -ERESTARTSYS immediately when receiving SIGKILL signal which is sent by "jffs2_gcd_mtd" during umounting jffs2. This will break the SPI memory operation because the data transmitting may begin before the command or address transmitting completes. Use wait_for_completion_timeout to prevent the process from being interruptible. Fixes: 67dca5e580f1 ("spi: spi-mem: Add support for Zynq QSPI controller") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Link: https://lore.kernel.org/r/20210826005930.20572-1-quanyang.wang@windriver.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-26spi: sprd: Add ADI r3 supportChunyan Zhang1-50/+165
ADI r3p0 is used on SC9863 and UMS512 SoCs. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/20210826091549.2138125-3-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-26spi: sprd: Fix the wrong WDG_LOAD_VALChunyan Zhang1-1/+1
Use 50ms as default timeout value and the time clock is 32768HZ. The original value of WDG_LOAD_VAL is not correct, so this patch fixes it. Fixes: ac1775012058 ("spi: sprd: Add the support of restarting the system") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20210826091549.2138125-2-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24spi: davinci: invoke chipselect callbackMatija Glavinic Pecotic1-7/+1
Davinci needs to configure chipselect on transfer. Fixes: 4a07b8bcd503 ("spi: bitbang: Make chipselect callback optional") Signed-off-by: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nokia.com> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Link: https://lore.kernel.org/r/735fb7b0-82aa-5b9b-85e4-53f0c348cc0e@nokia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24spi: sprd: fill offset only to RD_CMD register for reading from slave deviceChunyan Zhang1-6/+5
RD_CMD can accept slave address offset only, higher bits are reserved. Writing the whole slave address including slave base seems unnecessary. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20210824070212.2089255-3-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24spi: sprd: Make sure offset not equal to slave address sizeChunyan Zhang1-1/+1
The slave register offset shouldn't equal to the max slave address which ADI can support to access. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20210824070212.2089255-2-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-24spi: sprd: Pass offset instead of physical address to adi_read/_write()Chunyan Zhang1-61/+44
The register offset would be added a physical address base and then pass to the function sprd_adt_read()/_write() each time before calling them. So we can do that within these two functions instead, that would make the code more clear. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20210824070212.2089255-1-zhang.lyra@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23spi: rockchip-sfc: Fix assigned but never used return error codesColin Ian King1-2/+2
Currently there are two places where the error return variable ret is being assigned -ETIMEDOUT on timeout errors and this value is not being returned. Fix this by returning -ETIMEDOUT rather than redundantly assiging it to ret. Addresses-Coverity: ("Unused value") Fixes: 0b89fc0a367e ("spi: rockchip-sfc: add rockchip serial flash controller") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210818141051.36320-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-23spi: rockchip-sfc: Remove redundant IO operationsJon Lin1-2/+2
Coherent dma buffer is uncached and memcpy is enough. Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210821124925.6066-1-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-20spi: stm32: fix excluded_middle.cocci warningskernel test robot1-2/+1
drivers/spi/spi-stm32.c:915:23-25: WARNING !A || A && B is equivalent to !A || B Condition !A || A && B is equivalent to !A || B. Generated by: scripts/coccinelle/misc/excluded_middle.cocci Fixes: 7ceb0b8a3ced ("spi: stm32: finalize message either on dma callback or EOT") CC: Alain Volmat <alain.volmat@foss.st.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Reviewed-by: Alain Volmat <alain.volmat@foss.st.com> Link: https://lore.kernel.org/r/20210713191004.GA14729@5eb5c2cbef84 Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-19spi: coldfire-qspi: Use clk_disable_unprepare in the remove functionChristophe JAILLET1-1/+1
'clk_prepare_enable()' is used in the probe, so 'clk_disable_unprepare()' should be used in the remove function to be consistent. Fixes: 499de01c5c0b ("spi: coldfire-qspi: Use clk_prepare_enable and clk_disable_unprepare") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ee91792ddba61342b0d3284cd4558a2b0016c4e7.1629319838.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-18spi: tegra20-slink: remove spi_master_put() in tegra_slink_remove()Yang Yingliang1-2/+0
spi_master_put() is already called in spi_unregister_master(), or it will lead a double decrement refcount. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20210810142230.2220453-1-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-17spi: rockchip-sfc: add rockchip serial flash controllerChris Morgan3-0/+707
Add the rockchip serial flash controller (SFC) driver. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20210812134546.31340-3-jon.lin@rock-chips.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-16spi: orion: Prevent incorrect chip select behaviourNathan Rossi1-6/+16
When clearing the chip-select mask, the controller will switch to chip selecting the native CS0 line. Because the control register chip-select mask is not updated in a single write this will cause undesirable chip-selection of CS0 even when requesting to select other native chip-select lines. This is additionally problematic as the chip-select may still be asserted. With the ARMADA 38x SoC the controller will assert both the desired native chip-select and CS0. To avoid any undesirable behaviour with the chip-select lines, update the control register with a single write. This avoids selecting CS0 and causes the (de-)assert to apply at the same time. Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Link: https://lore.kernel.org/r/20210816050228.3223661-1-nathan@nathanrossi.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-12Merge tag 'imx-ecspi-5.15' of ↵Arnd Bergmann1-6/+35
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX eCSPI errata handling for 5.15: It includes all required changes for handling i.MX6/7 eCSPI errata ERR009165, which causes FIFO transfer to be sent twice in DMA mode. Both SPI and DMA maintainers agree to merge it through arm-soc tree. * tag 'imx-ecspi-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dmaengine: imx-sdma: add terminated list for freed descriptor in worker dmaengine: imx-sdma: add uart rom script dma: imx-sdma: add i.mx6ul compatible name dmaengine: imx-sdma: remove ERR009165 on i.mx6ul spi: imx: remove ERR009165 workaround on i.mx6ul spi: imx: fix ERR009165 dmaengine: imx-sdma: add mcu_2_ecspi script dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script dmaengine: imx-sdma: remove duplicated sdma_load_context Revert "dmaengine: imx-sdma: refine to load context only once" Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores" Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core" Link: https://lore.kernel.org/r/20210809071838.GF30984@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-12spi: mxic: add missing bracesYang Yingliang1-1/+2
Fix the following waring: drivers/spi/spi-mxic.c: In function ‘mxic_spi_mem_exec_op’: drivers/spi/spi-mxic.c:401:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation] if (op->data.dir == SPI_MEM_DATA_IN) ^~ drivers/spi/spi-mxic.c:403:4: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’ if (op->data.dtr) ^~ Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Zhengxun Li <zhengxunli@mxic.com.tw> Link: https://lore.kernel.org/r/20210810142405.2221540-1-yangyingliang@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-10spi: spi-pic32: Fix issue with uninitialized dma_slave_configTony Lindgren1-0/+1
Depending on the DMA driver being used, the struct dma_slave_config may need to be initialized to zero for the unused data. For example, we have three DMA drivers using src_port_window_size and dst_port_window_size. If these are left uninitialized, it can cause DMA failures. For spi-pic32, this is probably not currently an issue but is still good to fix though. Fixes: 1bcb9f8ceb67 ("spi: spi-pic32: Add PIC32 SPI master driver") Cc: Purna Chandra Mandal <purna.mandal@microchip.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210810081727.19491-2-tony@atomide.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-10spi: spi-fsl-dspi: Fix issue with uninitialized dma_slave_configTony Lindgren1-0/+1
Depending on the DMA driver being used, the struct dma_slave_config may need to be initialized to zero for the unused data. For example, we have three DMA drivers using src_port_window_size and dst_port_window_size. If these are left uninitialized, it can cause DMA failures. For spi-fsl-dspi, this is probably not currently an issue but is still good to fix though. Fixes: 90ba37033cb9 ("spi: spi-fsl-dspi: Add DMA support for Vybrid") Cc: Sanchayan Maity <maitysanchayan@gmail.com> Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210810081727.19491-1-tony@atomide.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-09spi: mediatek: fix build warnning in set cs timingMason Zhang1-6/+6
this patch fixed the build warnning in set cs timing. Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com> Link: https://lore.kernel.org/r/20210809055911.17538-1-Mason.Zhang@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-09spi: mxic: patch for octal DTR mode supportZhengxun Li1-11/+30
Driver patch for octal DTR mode support. Owing to the spi_mem_default_supports_op() is not support dtr operation. Based on commit <539cf68cd51b> (spi: spi-mem: add spi_mem_dtr_supports_op()) add spi_mem_dtr_supports_op() to support dtr and keep checking the buswidth and command bytes. Signed-off-by: Zhengxun Li <zhengxunli@mxic.com.tw> Link: https://lore.kernel.org/r/1628054827-458-1-git-send-email-zhengxunli@mxic.com.tw Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-09spi: tegra20-slink: Don't use resource-managed spi_register helperDmitry Osipenko1-1/+5
Don't use resource-managed spi_register helper to correct the driver removal order and make it to match the error unwinding order of the probe function. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210731192731.5869-2-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-09spi: tegra20-slink: Improve runtime PM usageDmitry Osipenko1-48/+25
The Tegra SPI driver supports runtime PM, which controls the clock enable state, but the clk is also enabled separately from the RPM at the driver probe time, and thus, stays always on. Fix it. Runtime PM now is always available on Tegra, hence there is no need to check the RPM presence in the driver anymore. Remove these checks. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210731192731.5869-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-09Merge 5.14-rc5 into driver-core-nextGreg Kroah-Hartman6-19/+53
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-09Merge 5.14-rc5 into char-misc-nextGreg Kroah-Hartman6-19/+53
We need the fixes in here as well, and resolves some merge issues with the mhi codebase. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-06Merge tag 'spi-fix-v5.14-rc4' of ↵Linus Torvalds6-19/+53
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small collection of fixes for SPI, small mostly driver specific things plus a fix for module autoloading which hadn't been working properly for DT systems" * tag 'spi-fix-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: cadence-quadspi: Fix check condition for DTR ops spi: mediatek: Fix fifo transfer spi: imx: mx51-ecspi: Fix CONFIGREG delay comment spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculation spi: update modalias_show after of_device_uevent_modalias support spi: meson-spicc: fix memory leak in meson_spicc_remove spi: spi-mux: Add module info needed for autoloading
2021-08-05spi: cadence-quadspi: Fix check condition for DTR opsApurva Nandan1-3/+18
buswidth and dtr fields in spi_mem_op are only valid when the corresponding spi_mem_op phase has a non-zero length. For example, SPI NAND core doesn't set buswidth when using SPI_MEM_OP_NO_ADDR phase. Fix the dtr checks in set_protocol() and suppports_mem_op() to ignore empty spi_mem_op phases, as checking for dtr field in empty phase will result in false negatives. Signed-off-by: Apurva Nandan <a-nandan@ti.com> Link: https://lore.kernel.org/r/20210716232504.182-3-a-nandan@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-05spi: modify set_cs_timing parameterMason Zhang2-50/+65
This patch modified set_cs_timing parameter, no need pass in spi_delay to set_cs_timing callback. By the way, we modified the mediatek and tegra114 spi driver to fix build err. In mediatek spi driver, We have support set absolute time not clk_count, and call this function in prepare_message not user's API. Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com> Link: https://lore.kernel.org/r/20210804133746.6742-1-Mason.Zhang@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-05spi: move cs spi_delay to spi_deviceMason Zhang1-3/+3
As we know, spi core layer has removed spi_set_cs_timing() API. So this patch moved spi_delay for cs_timing from spi_controller to spi_device, because cs timing should be set by spi_device but not controller. Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com> Link: https://lore.kernel.org/r/20210804133716.32040-1-Mason.Zhang@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-05misc: gehc-achc: new driverSebastian Reichel1-1/+0
General Electric Healthcare's PPD has a secondary processor from NXP's Kinetis K20 series. That device has two SPI chip selects: The main interface's behaviour depends on the loaded firmware and is currently unused. The secondary interface can be used to update the firmware using EzPort protocol. This is implemented by this driver using the kernel's firmware API. The firmware is being flashed into non-volatile flash memory, so it is enough to flash it once and not on every boot. Flashing will wear the flash memory (it has a life time of at least 10k programming cycles). At the same time only occasional FW updates are expected (like e.g. a BIOS update). Thus the firmware update is triggered via sysfs instead of doing it in the driver's probe routine like many other drivers. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20210802172309.164365-4-sebastian.reichel@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05Merge tag 'fpga-for-5.15' of ↵Greg Kroah-Hartman1-9/+12
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next Moritz writes: FPGA Manager changes for 5.15-rc1 FPGA Manager - Colin's change is a simple spelling cleanup. DFL - Martin's fist change exposes DFL feature revision to client drivers - Martin's second change modifies a SPI driver to populate different spi_board_info modaliases based on the DFL feature revision All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my for-next branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: spi: spi-altera-dfl: support n5010 feature revision fpga: dfl: expose feature revision from struct dfl_device fpga: Fix spelling mistake "eXchnage" -> "exchange" in Kconfig
2021-08-04Merge series "arm: ep93xx: CCF conversion" from Nikita Shubin ↵Mark Brown1-2/+2
<nikita.shubin@maquefel.me>: This series series of patches converts ep93xx to Common Clock Framework. It consists of preparation patches to use clk_prepare_enable where it is needed, instead of clk_enable used in ep93xx drivers prior to CCF and a patch converting mach-ep93xx/clock.c to CCF. Link: https://lore.kernel.org/patchwork/cover/1445563/ Link: https://lore.kernel.org/patchwork/patch/1435884/ v1->v2: - added SoB Alexander Sverdlin (7): iio: ep93xx: Prepare clock before using it spi: spi-ep93xx: Prepare clock before using it Input: ep93xx_keypad: Prepare clock before using it video: ep93xx: Prepare clock before using it dmaengine: ep93xx: Prepare clock before using it ASoC: cirrus: i2s: Prepare clock before using it pwm: ep93xx: Prepare clock before using it Nikita Shubin (1): ep93xx: clock: convert in-place to COMMON_CLK arch/arm/Kconfig | 2 +- arch/arm/mach-ep93xx/clock.c | 975 ++++++++++++++----------- arch/arm/mach-ep93xx/core.c | 2 +- arch/arm/mach-ep93xx/soc.h | 42 +- drivers/dma/ep93xx_dma.c | 6 +- drivers/iio/adc/ep93xx_adc.c | 6 +- drivers/input/keyboard/ep93xx_keypad.c | 4 +- drivers/pwm/pwm-ep93xx.c | 12 +- drivers/spi/spi-ep93xx.c | 4 +- drivers/video/fbdev/ep93xx-fb.c | 4 +- sound/soc/cirrus/ep93xx-i2s.c | 12 +- 11 files changed, 605 insertions(+), 464 deletions(-) base-commit: 64376a981a0e2e57c46efa63197c2ebb7dab35df -- 2.26.2
2021-08-03spi: bcm2835aux: use 'unsigned int' instead of 'unsigned'Jason Wang1-2/+2
Prefer 'unsigned int' to bare use of 'unsigned'. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Link: https://lore.kernel.org/r/20210731133342.432575-1-wangborong@cdjrlc.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-03spi: spi-ep93xx: Prepare clock before using itAlexander Sverdlin1-2/+2
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch to Common Clock Framework, otherwise the following is visible: WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:1011 clk_core_enable+0x9c/0xbc Enabling unprepared ep93xx-spi.0 ... Hardware name: Cirrus Logic EDB9302 Evaluation Board ... clk_core_enable clk_core_enable_lock ep93xx_spi_prepare_hardware __spi_pump_messages __spi_sync spi_sync spi_sync_transfer.constprop.0 regmap_spi_write _regmap_raw_write_impl _regmap_bus_raw_write _regmap_update_bits regmap_update_bits_base cs4271_component_probe snd_soc_component_probe soc_probe_component snd_soc_bind_card edb93xx_probe ... spi_master spi0: failed to prepare transfer hardware: -108 Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210726140001.24820-3-nikita.shubin@maquefel.me Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-03spi: imx: Implement support for CS_WORDUwe Kleine-König1-0/+10
This only works when the native chipselect is in use. On a board with a Ti ADS7950 8 channel ADC. This patch reduces the time to read out all channels once from 280 us to 20 us. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210727124226.5571-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02spi: mediatek: Fix fifo transferGuenter Roeck1-14/+5
Commit 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") claims that fifo RX mode was never handled, and adds the presumably missing code to the FIFO transfer function. However, the claim that receive data was not handled is incorrect. It was handled as part of interrupt handling after the transfer was complete. The code added with the above mentioned commit reads data from the receive FIFO before the transfer is started, which is wrong. This results in an actual transfer error on a Hayato Chromebook. Remove the code trying to handle receive data before the transfer is started to fix the problem. Fixes: 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") Cc: Peter Hess <peter.hess@ph-home.de> Cc: Frank Wunderlich <frank-w@public-files.de> Cc: Tzung-Bi Shih <tzungbi@google.com> Cc: Hsin-Yi Wang <hsinyi@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Hsin-Yi Wang <hsinyi@google.com> Tested-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210802030023.1748777-1-linux@roeck-us.net Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-29spi: spi-altera-dfl: support n5010 feature revisionMartin Hundebøll1-9/+12
The Max10 BMC on the Silicom n5010 PAC is slightly different than the existing BMCs, so use a dedicated feature revision detect it. Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Martin Hundebøll <mhu@silicom.dk> Signed-off-by: Moritz Fischer <mdf@kernel.org>
2021-07-28spi: imx: mx51-ecspi: Fix CONFIGREG delay commentMarek Vasut1-1/+1
For (2 * 1000000) / min_speed_hz < 10 to be true in naturals with zero, the min_speed_hz must be above 200000 (i.e. 200001 rounds down to 9, so the condition triggers). Update the comment. No functional change. Fixes: 6fd8b8503a0dc ("spi: spi-imx: Fix out-of-order CS/SCLK operation at low speeds") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Mark Brown <broonie@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210727160428.7673-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-27Merge 5.14-rc3 into driver-core-nextGreg Kroah-Hartman7-65/+90
We need the driver-core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-26spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculationMarek Vasut1-1/+15
The spi_imx->spi_bus_clk may be uninitialized and thus also zero in mx51_ecspi_prepare_message(), which would lead to division by zero in kernel. Since bitbang .setup_transfer callback which initializes the spi_imx->spi_bus_clk is called after bitbang prepare_message callback, iterate over all the transfers in spi_message, find the one with lowest bus frequency, and use that bus frequency for the delay calculation. Note that it is not possible to move this CONFIGREG delay back into the .setup_transfer callback, because that is invoked too late, after the GPIO chipselects were already configured. Fixes: 135cbd378eab ("spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210726100102.5188-1-marex@denx.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-23spi: imx: remove ERR009165 workaround on i.mx6ulRobin Gong1-3/+36
ERR009165 fixed on i.mx6ul/6ull/6sll. All other i.mx6/7 and i.mx8m/8mm still need this errata. Please refer to nxp official errata document from https://www.nxp.com/ . For removing workaround on those chips. Add new i.mx6ul type. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23spi: imx: fix ERR009165Robin Gong1-7/+3
Change to XCH mode even in dma mode, please refer to the below errata: https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-22spi: update modalias_show after of_device_uevent_modalias supportAndreas Schwab1-0/+4
Commit 3ce6c9e2617e ("spi: add of_device_uevent_modalias support") is incomplete, as it didn't update the modalias_show function to generate the of: modalias string if available. Fixes: 3ce6c9e2617e ("spi: add of_device_uevent_modalias support") Signed-off-by: Andreas Schwab <schwab@suse.de> Link: https://lore.kernel.org/r/mvmwnpi4fya.fsf@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-22spi: meson-spicc: fix memory leak in meson_spicc_removeDongliang Mu1-0/+2
In meson_spicc_probe, the error handling code needs to clean up master by calling spi_master_put, but the remove function does not have this function call. This will lead to memory leak of spicc->master. Reported-by: Dongliang Mu <mudongliangabcd@gmail.com> Fixes: 454fa271bc4e("spi: Add Meson SPICC driver") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Link: https://lore.kernel.org/r/20210720100116.1438974-1-mudongliangabcd@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-22spi: pxa2xx: Adapt reset_sccr1() to the case when no message availableAndy Shevchenko1-3/+10
In some cases reset_sccr1() can be called when no message available. This means that there is no associated chip to receive that message and hence no threshold needs to be set. Adapt the function to such cases. Fixes: 3bbdc083262d ("spi: pxa2xx: Reuse int_stop_and_reset() in couple of places") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210721121520.62605-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-22spi: spi-mux: Add module info needed for autoloadingUwe Kleine-König1-0/+8
With the spi device table udev can autoload the spi-mux module in the presence of an spi-mux device. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210721095321.2165453-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-29 17:24:58 +0300