summaryrefslogtreecommitdiff
path: root/drivers/spmi
AgeCommit message (Collapse)AuthorFilesLines
2022-09-30spmi: pmic-arb: increase SPMI transaction timeout delayDavid Collins1-1/+1
Increase the SPMI transaction timeout delay from 100 us to 1000 us in order to account for the slower execution time found on some simulator targets. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> Link: https://lore.kernel.org/r/1655004286-11493-11-git-send-email-quic_fenglinw@quicinc.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220930005019.2663064-10-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writesDavid Collins1-0/+5
The system crashes due to an access permission violation when writing to a PMIC peripheral which is not owned by the current ee. Add a check for PMIC arbiter version 5 for such invalid write requests and return an error instead of crashing the system. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> Link: https://lore.kernel.org/r/1655004286-11493-8-git-send-email-quic_fenglinw@quicinc.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220930005019.2663064-9-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30spmi: pmic-arb: correct duplicate APID to PPID mapping logicDavid Collins1-6/+7
Correct the way that duplicate PPID mappings are handled for PMIC arbiter v5. The final APID mapped to a given PPID should be the one which has write owner = APPS EE, if it exists, or if not that, then the first APID mapped to the PPID, if it exists. Fixes: 40f318f0ed67 ("spmi: pmic-arb: add support for HW version 5") Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> Link: https://lore.kernel.org/r/1655004286-11493-7-git-send-email-quic_fenglinw@quicinc.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220930005019.2663064-8-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30spmi: pmic-arb: add support to dispatch interrupt based on IRQ statusAshay Jaiswal1-0/+29
Current implementation of SPMI arbiter dispatches interrupt based on the Arbiter's accumulator status, in some cases the accumulator status may remain zero and the interrupt remains un-handled. Add logic to dispatch interrupts based Arbiter's IRQ status if the accumulator status is zero. Signed-off-by: Ashay Jaiswal <ashayj@codeaurora.org> Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> Link: https://lore.kernel.org/r/1655004286-11493-6-git-send-email-quic_fenglinw@quicinc.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220930005019.2663064-7-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30spmi: pmic-arb: check apid against limits before calling irq handlerDavid Collins1-3/+8
Check that the apid for an SPMI interrupt falls between the min_apid and max_apid that can be handled by the APPS processor before invoking the per-apid interrupt handler: periph_interrupt(). This avoids an access violation in rare cases where the status bit is set for an interrupt that is not owned by the APPS processor. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> Link: https://lore.kernel.org/r/1655004286-11493-5-git-send-email-quic_fenglinw@quicinc.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220930005019.2663064-6-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irqSubbaraman Narayanamurthy1-10/+5
Currently, cleanup_irq() is invoked when a peripheral's interrupt fires and there is no mapping present in the interrupt domain of spmi interrupt controller. The cleanup_irq clears the arbiter bit, clears the pmic interrupt and disables it at the pmic in that order. The last disable in cleanup_irq races with request_irq() in that it stomps over the enable issued by request_irq. Fix this by not writing to the pmic in cleanup_irq. The latched bit will be left set in the pmic, which will not send us more interrupts even if the enable bit stays enabled. When a client wants to request an interrupt, use the activate callback on the irq_domain to clear latched bit. This ensures that the latched, if set due to the above changes in cleanup_irq or when the bootloader leaves it set, gets cleaned up, paving way for upcoming interrupts to trigger. With this, there is a possibility of unwanted triggering of interrupt right after the latched bit is cleared - the interrupt may be left enabled too. To avoid that, clear the enable first followed by clearing the latched bit in the activate callback. Fixes: 6bc546e71e50 ("spmi: pmic-arb: cleanup unrequested irqs") Fixes: 02abec3616c1 ("spmi: pmic-arb: rename pa_xx to pmic_arb_xx and other cleanup") Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> [collinsd@codeaurora.org: fix merge conflict] Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> Link: https://lore.kernel.org/r/1655004286-11493-4-git-send-email-quic_fenglinw@quicinc.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220930005019.2663064-5-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30spmi: pmic-arb: handle spurious interruptFenglin Wu1-3/+11
Call handle_bad_irq() when the summary interrupt is fired spuriously. Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> Link: https://lore.kernel.org/r/1655004286-11493-3-git-send-email-quic_fenglinw@quicinc.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220930005019.2663064-4-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30spmi: pmic-arb: add a print in cleanup_irqAbhijeet Dharmapurikar1-0/+2
The cleanup_irq() was meant to clear and mask interrupts that were left enabled in the hardware but there was no interrupt handler registered for it. Add an error print when it gets invoked. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com> Link: https://lore.kernel.org/r/1655004286-11493-2-git-send-email-quic_fenglinw@quicinc.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220930005019.2663064-3-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-30drivers: spmi: Directly use ida_alloc()/free()keliu1-2/+2
Use ida_alloc()/ida_free() instead of deprecated ida_simple_get()/ida_simple_remove() . Signed-off-by: keliu <liuke94@huawei.com> Link: https://lore.kernel.org/r/20220527071338.2359733-1-liuke94@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220930005019.2663064-2-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-18spmi: add a helper to look up an SPMI device from a device nodeCaleb Connolly1-0/+17
The helper function spmi_device_from_of() takes a device node and returns the SPMI device associated with it. This is like of_find_device_by_node but for SPMI devices. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220429220904.137297-2-caleb.connolly@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-17spmi: spmi-pmic-arb: fix irq_set_type race conditionDavid Collins1-36/+140
The qpnpint_irq_set_type() callback function configures the type (edge vs level) and polarity (high, low, or both) of a particular PMIC interrupt within a given peripheral. To do this, it reads the three consecutive IRQ configuration registers, modifies the specified IRQ bit within the register values, and finally writes the three modified register values back to the PMIC. While a spinlock is used to provide mutual exclusion on the SPMI bus during the register read and write calls, there is no locking around the overall read, modify, write sequence. This opens up the possibility of a race condition if two tasks set the type of a PMIC IRQ within the same peripheral simultaneously. When the race condition is encountered, both tasks will read the old value of the registers and IRQ bits set by one of the tasks will be dropped upon the register write of the other task. This then leads to PMIC IRQs being enabled with an incorrect type and polarity configured. Such misconfiguration can lead to an IRQ storm that overwhelms the system and causes it to crash. This race condition and IRQ storm have been observed when using a pair of pm8941-pwrkey devices to handle PMK8350 pwrkey and resin interrupts. The independent devices probe asynchronously in parallel and can simultaneously request and configure PMIC IRQs in the same PMIC peripheral. For a good case, the IRQ configuration calls end up serialized due to timing deltas and the register read/write sequence looks like this: 1. pwrkey probe: SPMI read(0x1311): 0x00, 0x00, 0x00 2. pwrkey probe: SPMI write(0x1311): 0x80, 0x80, 0x80 3. resin probe: SPMI read(0x1311): 0x80, 0x80, 0x80 4. resin probe: SPMI write(0x1311): 0xC0, 0xC0, 0xC0 The final register states after both devices have requested and enabled their respective IRQs is thus: 0x1311: 0xC0 0x1312: 0xC0 0x1313: 0xC0 0x1314: 0x00 0x1315: 0xC0 For a bad case, the IRQ configuration calls end up occurring simultaneously and the race condition is encountered. The register read/write sequence then looks like this: 1. pwrkey probe: SPMI read(0x1311): 0x00, 0x00, 0x00 2. resin probe: SPMI read(0x1311): 0x00, 0x00, 0x00 3. pwrkey probe: SPMI write(0x1311): 0x80, 0x80, 0x80 4. resin probe: SPMI write(0x1311): 0x40, 0x40, 0x40 In this case, the final register states after both devices have requested and enabled their respective IRQs is thus: 0x1311: 0x40 0x1312: 0x40 0x1313: 0x40 0x1314: 0x00 0x1315: 0xC0 This corresponds to the resin IRQ being configured for both rising and falling edges, as expected. However, the pwrkey IRQ is misconfigured as level type with both polarity high and low set to disabled. The PMIC IRQ triggering hardware treats this particular register configuration as if level low triggering is enabled. The raw pwrkey IRQ signal is low when the power key is not being pressed. Thus, the pwrkey IRQ begins firing continuously in an IRQ storm. Fix the race condition by holding the spmi-pmic-arb spinlock for the duration of the read, modify, write sequence performed in the qpnpint_irq_set_type() function. Split the pmic_arb_read_cmd() and pmic_arb_write_cmd() functions each into three parts so that hardware register IO is decoupled from spinlock locking. This allows a new function pmic_arb_masked_write() to be added which locks the spinlock and then calls register IO functions to perform SPMI read and write commands in a single atomic operation. Link: https://lore.kernel.org/r/20211118034719.28971-1-quic_collinsd@quicinc.com Signed-off-by: David Collins <quic_collinsd@quicinc.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20211216190812.1574801-7-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17spmi: mediatek: Add support for MT8195James Lo1-0/+88
Add spmi support for MT8195. Refine indent in spmi-mtk-pmif.c. Link: https://lore.kernel.org/r/20211119034613.32489-5-james.lo@mediatek.com Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: James Lo <james.lo@mediatek.com> Signed-off-by: Henry Chen <henryc.chen@mediatek.com> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20211216190812.1574801-6-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17spmi: mediatek: Add support for MT6873/8192James Lo3-0/+466
Add spmi support for MT6873/8192. Refine indent in spmi-mtk-pmif.c. Link: https://lore.kernel.org/r/20211119034613.32489-4-james.lo@mediatek.com Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: James Lo <james.lo@mediatek.com> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20211216190812.1574801-5-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17spmi: pmic-arb: Add sid and address to error messagesStephen Boyd1-8/+9
It's useful to know what particular device/component is having trouble accessing the bus. Add the sid and address to error messages here so that debugging is a little simpler. Link: https://lore.kernel.org/r/20210920234849.3614036-1-swboyd@chromium.org Cc: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Cc: satya priya <skakit@codeaurora.org> Reviewed-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Reviewed-by: Satya Priya <skakit@codeaurora.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20211216190812.1574801-2-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: Make remove callback return voidUwe Kleine-König1-2/+1
The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-25spmi: hisi-spmi-controller: move driver from stagingMauro Carvalho Chehab3-0/+377
The Hisilicon 6421v600 SPMI driver is ready for mainstream. So, move it from staging. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/35b9f9169889c1f4d51eff8bf2035450c9e02576.1624606660.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-12spmi: spmi-pmic-arb: Fix hw_irq overflowSubbaraman Narayanamurthy1-3/+2
Currently, when handling the SPMI summary interrupt, the hw_irq number is calculated based on SID, Peripheral ID, IRQ index and APID. This is then passed to irq_find_mapping() to see if a mapping exists for this hw_irq and if available, invoke the interrupt handler. Since the IRQ index uses an "int" type, hw_irq which is of unsigned long data type can take a large value when SID has its MSB set to 1 and the type conversion happens. Because of this, irq_find_mapping() returns 0 as there is no mapping for this hw_irq. This ends up invoking cleanup_irq() as if the interrupt is spurious whereas it is actually a valid interrupt. Fix this by using the proper data type (u32) for id. Cc: stable@vger.kernel.org Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Link: https://lore.kernel.org/r/1612812784-26369-1-git-send-email-subbaram@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20210212031417.3148936-1-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-10spmi: Add driver shutdown supportHsin-Hsiung Wang1-0/+9
Add new shutdown() method. Use it in the standard driver model style. Link: https://lore.kernel.org/r/1603187810-30481-2-git-send-email-hsin-hsiung.wang@mediatek.com Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20201210023344.2838141-4-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-10spmi: fix some coding style issues at the spmi coreMauro Carvalho Chehab1-1/+4
While preparing to port the HiSilicon 6421v600 SPMI driver, I noticed some coding style issues at the SPMI core. Address them. Link: https://lore.kernel.org/r/fec878502147336cbf2cf86e476e9dd797cd7e6f.1601360391.git.mchehab+huawei@kernel.org Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20201210023344.2838141-3-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-10spmi: get rid of a warning when built with W=1Mauro Carvalho Chehab1-4/+1
The SPMI core complaing with this warning when built with W=1: drivers/spmi/spmi.c: In function ‘spmi_controller_remove’: drivers/spmi/spmi.c:548:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] 548 | int dummy; | ^~~~~ As the dummy var isn't needed, remove it. Link: https://lore.kernel.org/r/aacfd03835b7d1b3b6c21665b44000fe7242e535.1601360391.git.mchehab+huawei@kernel.org Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20201210023344.2838141-2-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-10spmi: pmic-arb: Set lockdep class for hierarchical irq domainsStephen Boyd1-0/+4
I see the following lockdep splat in the qcom pinctrl driver when attempting to suspend the device. WARNING: possible recursive locking detected 5.4.11 #3 Tainted: G W -------------------------------------------- cat/3074 is trying to acquire lock: ffffff81f49804c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 but task is already holding lock: ffffff81f1cc10c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&irq_desc_lock_class); lock(&irq_desc_lock_class); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by cat/3074: #0: ffffff81f01d9420 (sb_writers#7){.+.+}, at: vfs_write+0xd0/0x1a4 #1: ffffff81bd7d2080 (&of->mutex){+.+.}, at: kernfs_fop_write+0x12c/0x1fc #2: ffffff81f4c322f0 (kn->count#337){.+.+}, at: kernfs_fop_write+0x134/0x1fc #3: ffffffe411a41d60 (system_transition_mutex){+.+.}, at: pm_suspend+0x108/0x348 #4: ffffff81f1c5e970 (&dev->mutex){....}, at: __device_suspend+0x168/0x41c #5: ffffff81f1cc10c0 (&irq_desc_lock_class){-.-.}, at: __irq_get_desc_lock+0x64/0x94 stack backtrace: CPU: 5 PID: 3074 Comm: cat Tainted: G W 5.4.11 #3 Hardware name: Google Cheza (rev3+) (DT) Call trace: dump_backtrace+0x0/0x174 show_stack+0x20/0x2c dump_stack+0xc8/0x124 __lock_acquire+0x460/0x2388 lock_acquire+0x1cc/0x210 _raw_spin_lock_irqsave+0x64/0x80 __irq_get_desc_lock+0x64/0x94 irq_set_irq_wake+0x40/0x144 qpnpint_irq_set_wake+0x28/0x34 set_irq_wake_real+0x40/0x5c irq_set_irq_wake+0x70/0x144 pm8941_pwrkey_suspend+0x34/0x44 platform_pm_suspend+0x34/0x60 dpm_run_callback+0x64/0xcc __device_suspend+0x310/0x41c dpm_suspend+0xf8/0x298 dpm_suspend_start+0x84/0xb4 suspend_devices_and_enter+0xbc/0x620 pm_suspend+0x210/0x348 state_store+0xb0/0x108 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x4c/0x64 kernfs_fop_write+0x15c/0x1fc __vfs_write+0x54/0x18c vfs_write+0xe4/0x1a4 ksys_write+0x7c/0xe4 __arm64_sys_write+0x20/0x2c el0_svc_common+0xa8/0x160 el0_svc_handler+0x7c/0x98 el0_svc+0x8/0xc Set a lockdep class when we map the irq so that irq_set_wake() doesn't warn about a lockdep bug that doesn't exist. Fixes: 12a9eeaebba3 ("spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chips") Cc: Douglas Anderson <dianders@chromium.org> Cc: Brian Masney <masneyb@onstation.org> Cc: Lina Iyer <ilina@codeaurora.org> Cc: Maulik Shah <mkshah@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20200121183748.68662-1-swboyd@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner2-18/+2
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-14spmi: pmic-arb: select IRQ_DOMAIN_HIERARCHY in KconfigBrian Masney1-1/+1
Select IRQ_DOMAIN_HIERARCHY for pmic-arb in Kconfig since this driver uses the version 2 IRQ interfaces. IRQ_DOMAIN_HIERARCHY selects IRQ_DOMAIN, so it can be removed from here. Signed-off-by: Brian Masney <masneyb@onstation.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-09spmi: pmic-arb: revert "validate type when mapping IRQ"Brian Masney1-14/+7
Validation of the IRQ type was added to spmi pmic-arb, however spmi-mpp in device tree still uses IRQ_TYPE_NONE. This commit caused the spmi-mpp probe to fail since platform_irq_count() would return 0. Correct this by backing out the previous patch. Signed-off-by: Brian Masney <masneyb@onstation.org> Fixes: 135ef21ab064 ("spmi: pmic-arb: validate type when mapping IRQ") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-24spmi: pmic-arb: revert "disassociate old virq if hwirq mapping already exists"Brian Masney1-5/+0
Now that spmi-gpio is a proper hierarchical IRQ chip, and all in-tree users of device tree have been updated, we can now drop the hack that was introduced to disassociate the old Linux virq if a hwirq mapping already exists. That patch was introduced to not break git bisect for any existing boards. Driver was tested using gpio-keys and iadc/vadc on the LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-24spmi: pmic-arb: validate type when mapping IRQBrian Masney1-7/+14
qpnpint_irq_domain_map did not validate the IRQ type and this can cause IRQs to not work as expected if an unsupported type (such as IRQ_TYPE_NONE) is passed in. Now that spmi-gpio is a hierarchical IRQ controller, and all device tree bindings have been updated, add additional validation to the type field. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-24spmi: pmic-arb: disassociate old virq if hwirq mapping already existsBrian Masney1-0/+5
Check to see if the hwirq is already associated with another virq on this IRQ domain. If so, then disassociate it before associating the hwirq with the new virq. This is a temporary hack that is needed in order to not break git bisect for existing boards. The next patch in this series converts spmi-gpio to be a hierarchical IRQ chip, then there are several patches to update all of the device tree files, and finally this patch will be reverted within the same patch series. IRQs for spmi-gpio are all initially setup without an IRQ hierarchy on pmic-arb when mfd/qcom-spmi-pmic.c is probed (via the devm_of_platform_populate call) due to the interrupts property in device tree. Once spmi-gpio is converted to be a hierarchical IRQ chip in the next patch, existing users of gpio[d]_to_irq() will call pmic_gpio_to_irq(), and that will use the new IRQ chip code in spmi-gpio that sets up the IRQ in an IRQ hierarchy. The hwirq is now associated with two Linux virqs and interrupts will not work as expected. This patch corrects that issue. Driver was tested using gpio-keys and iadc/vadc on the LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-24spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical IRQ chipsBrian Masney1-20/+47
Convert the spmi-pmic-arb IRQ code to use the version 2 IRQ interface in order to support hierarchical IRQ chips. This is necessary so that spmi-gpio can be setup as a hierarchical IRQ chip with pmic-arb as the parent. IRQ chips in device tree should be usable from the start without the consumer having to make an additional call to gpio[d]_to_irq() to get the proper IRQ on the parent. The old qpnpint_irq_domain_map function would hardcode the handler as handle_level_irq, however qpnpint_irq_set_type would later override the handler. Properly set the handler when the IRQ is mapped. This new code doesn't return an error for IRQ_TYPE_NONE and preserves the existing behavior of using handle_level_irq since there are some broken device tree bindings that need to be corrected first. Driver was tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-28spmi: pmic-arb: Move the ownership check to irq_chip callbackKiran Gunda1-7/+19
Check the irq ownership in the irq_request_resources callback instead of checking it during the irq mapping. This can prevent installing the flow handler for the interrupt that is not owned by the EE and allow the irq translation during the gpio driver probe. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Tested-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28spmi: Convert to using %pOF instead of full_nameRob Herring1-8/+6
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28spmi: pmic-arb: Remove checking opc value not less than 0Fenglin Wu1-2/+2
The opc parameter in pmic_arb_write_cmd() function is defined with type u8 and it's always greater than or equal to 0. Checking that it's not less than 0 is redundant and it can cause a forbidden warning during compilation. Remove the check. Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28spmi: pmic-arb: add support for HW version 5David Collins1-22/+214
Add support for version 5 of the SPMI PMIC arbiter. It utilizes different offsets for registers than those found on version 3. Also, the procedure to determine if writing and IRQ access is allowed for a given PPID changes for version 5. Signed-off-by: David Collins <collinsd@codeaurora.org> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28spmi: pmic-arb: fix a possible null pointer dereferenceKiran Gunda1-2/+2
If "core" memory resource is not specified, then the driver could end up dereferencing a null pointer. Fix this issue. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28spmi: pmic-arb: return __iomem pointer instead of offsetKiran Gunda1-42/+51
Modify the pmic_arb version ops to return an __iomem pointer to the address instead of an offset. That way we do not need to care about the base address changes in the new HW version. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28spmi: pmic-arb: use irq_chip callback to set spmi irq wakeup capabilityKiran Gunda1-4/+9
Currently the driver sets the pmic arbiter core interrupt as wakeup capable irrespective of the child irqs which causes the system to wakeup unnecessarily. To fix this, set the core interrupt as wakeup capable only if any of the child irqs request for it. Do this by marking it as wakeup capable in the irq_set_wake callback. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28spmi: pmic-arb: return the value instead of passing by pointerKiran Gunda1-42/+40
Returning the output value from a function, when it is possible, is the better and cleaner way than passing it by the pointer. Hence, modify the ppid_to_apid mapping function to return apid instead of passing it by a pointer. While at it, pass the ppid as function parameter to ppid_to_apid mapping function instead of passing the sid and addr. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28spmi: pmic-arb: replace the writel_relaxed with __raw_writelKiran Gunda1-1/+1
Replace the writel_relaxed with __raw_writel to avoid byte swapping in pmic_arb_write_data() function. That way the code is independent of the CPU endianness. Fixes: 111a10bf3e53 ("spmi: pmic-arb: rename spmi_pmic_arb_dev to spmi_pmic_arb") Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28spmi: pmic-arb: fix memory allocation for mapping_tableKiran Gunda1-6/+5
Allocate the correct memory size (max_pmic_peripherals) for the mapping_table that holds the apid to ppid mapping. Also use a local variable for mapping_table for better alignment of the code. Fixes: 987a9f128b8a ("spmi: pmic-arb: Support more than 128 peripherals") Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28spmi: pmic-arb: optimize qpnpint_irq_set_type functionKiran Gunda1-12/+12
Optimize the qpnpint_irq_set_type() by using a local variable to hold the handler type. Also clean up other variable usage. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28spmi: pmic-arb: clean up pmic_arb_find_apid functionKiran Gunda1-7/+6
Clean up the pmic_arb_find_apid() by using the local variables to improve the code readability. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28spmi: pmic-arb: rename pa_xx to pmic_arb_xx and other cleanupKiran Gunda1-209/+209
This patch cleans up the following. - Rename the "pa" to "pmic_arb". - Rename the spmi_pmic_arb *dev to spmi_pmic_arb *pmic_arb. - Rename the pa_{read,write}_data() functions to pmic_arb_{read,write}_data(). - Rename channel to APID. - Rename the HWIRQ_*() macros to hwirq_to_*(). Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28spmi: pmic-arb: remove the read/write access checksKiran Gunda1-70/+5
The access mode checks for peripheral ownership for read/write permissions should not be required. Every peripheral enabled for this master is expected to have a read/write permissions. If there is any such invalid access due to wrong configuration in boot loader or device tree files, then it should be fixed in those locations. Hence, remove the access mode checks from the driver. Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17spmi: pmic-arb: Always allocate ppid_to_apid tableStephen Boyd1-10/+7
After commit 7f1d4e58dabb ("spmi: pmic-arb: optimize table lookups") we always need the ppid_to_apid table regardless of the version of pmic arbiter we have. Otherwise, we will try to deref the array when we don't allocate it on v2 hardware like the msm8974 SoCs. Cc: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Cc: Kiran Gunda <kgunda@codeaurora.org> Fixes: 7f1d4e58dabb ("spmi: pmic-arb: optimize table lookups") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-17spmi: Include OF based modalias in device ueventBjorn Andersson1-0/+12
Include the OF-based modalias in the uevent sent when registering SPMI devices, so that user space has a chance to autoload the kernel module for the device. Tested-by: Rob Clark <robdclark@gmail.com> Reported-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03spmi: spmi-pmic-arb: enable the SPMI interrupt as a wakeup sourceKiran Gunda1-0/+1
Currently the SPMI interrupt will not wake the device. Enable this interrupt as a wakeup source. Signed-off-by: Nicholas Troast <ntroast@codeaurora.org> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03spmi: pmic_arb: add support for PMIC bus arbiter v3Abhijeet Dharmapurikar1-50/+83
PMIC bus arbiter v3 supports 512 SPMI peripherals. Add the v3 operators to support this new arbiter version. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03spmi: pmic-arb: check apid enabled before calling the handlerAbhijeet Dharmapurikar1-3/+7
The driver currently invokes the apid handler (periph_handler()) once it sees that the summary status bit for that apid is set. However the hardware is designed to set that bit even if the apid interrupts are disabled. The driver should check whether the apid is indeed enabled before calling the apid handler. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03spmi: pmic_arb: use appropriate flow handlerAbhijeet Dharmapurikar1-0/+6
The current code uses handle_level_irq flow handler even if the trigger type of the interrupt is edge. This can lead to missing of an edge transition that happens when the interrupt is being handled. The level flow handler masks the interrupt while it is being handled, so if an edge transition happens at that time, that edge is lost. Use an edge flow handler for edge type interrupts which ensures that the interrupt stays enabled while being handled - at least until it triggers at which point the flow handler sets the IRQF_PENDING flag and only then masks the interrupt. That IRQF_PENDING state indicates an edge transition happened while the interrupt was being handled and the handler is called again. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-03spmi: pmic-arb: clear the latched status of the interruptAbhijeet Dharmapurikar1-2/+12
PMIC interrupts each have an internal latched status bit which is not visible from any register. This status bit is set as soon as the conditions specified in the interrupt type and polarity registers are met even if the interrupt is not enabled. When it is set, nothing else changes within the PMIC and no interrupt notification packets are sent. If the internal latched status bit is set when an interrupt is enabled, then the value is immediately propagated into the interrupt latched status register and an interrupt notification packet is sent out from the PMIC over SPMI. This PMIC hardware behavior can lead to a situation where the handler for a level triggered interrupt is called immediately after enable_irq() is called even though the interrupt physically triggered while it was disabled within the genirq framework. This situation takes place if the the interrupt fires twice after calling disable_irq(). The first time it fires, the level flow handler will mask and disregard it. Unfortunately, the second time it fires, the internal latched status bit is set within the PMIC and no further notification is received. When enable_irq() is called later, the interrupt is unmasked (enabled in the PMIC) which results in the PMIC immediately sending an interrupt notification packet out over SPMI. This breaks the semantics of level triggered interrupts within the genirq framework since they should be completely ignored while disabled. The PMIC internal latched status behavior also affects how interrupts are treated during suspend. While entering suspend, all interrupts not specified as wakeup mode are masked. Upon resume, these interrupts are unmasked. Thus if any of the non-wakeup PMIC interrupts fired while the system was suspended, then the PMIC will send interrupt notification packets out via SPMI as soon as they are unmasked during resume. This behavior violates genirq semantics as well since non-wakeup interrupts should be completely ignored during suspend. Modify the qpnpint_irq_unmask() function so that the interrupt latched status clear register is written immediately before the interrupt enable register. This clears the internal latched status bit of the interrupt so that it cannot trigger spuriously immediately upon being enabled. Also, while resuming an irq, an unmask could be called even if it was not previously masked. So, before writing these registers, check if the interrupt is already enabled within the PMIC. If it is, then no further register writes are required. This condition check ensures that a valid latched status register bit is not cleared until it is properly handled. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>