Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the old V4L2 core videobuf kAPI was finally removed. All media
drivers should now be using VB2 kAPI
- new automotive driver: mgb4
- new platform video driver: npcm-video
- new sensor driver: mt9m114
- new TI driver used in conjunction with Cadence CSI2RX IP to bridge
TI-specific parts
- ir-rx51 was removed and the N900 DT binding was moved to the
pwm-ir-tx generic driver
- drop atomisp-specific ov5693, using the upstream driver instead
- the camss driver has gained RDI3 support for VFE 17x
- the atomisp driver now detects ISP2400 or ISP2401 at run time. No
need to set it up at build time anymore
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
media: venus: Fix firmware path for resources
media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
media: venus: hfi_parser: Add check to keep the number of codecs within range
media: venus: hfi: add checks to handle capabilities from firmware
media: venus: hfi: fix the check to handle session buffer requirement
media: venus: hfi: add checks to perform sanity on queue pointers
media: platform: cadence: select MIPI_DPHY dependency
media: MAINTAINERS: Fix path for J721E CSI2RX bindings
media: cec: meson: always include meson sub-directory in Makefile
media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
media: mediatek: vcodec: using encoder device to alloc/free encoder memory
media: imx-jpeg: notify source chagne event when the first picture parsed
media: cx231xx: Use EP5_BUF_SIZE macro
media: siano: Drop unnecessary error check for debugfs_create_dir/file()
media: mediatek: vcodec: Handle invalid encoder vsi
media: aspeed: Drop unnecessary error check for debugfs_create_file()
Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
Documentation: media: gen-errors.rst: fix confusing ENOTTY description
...
|
|
This patch fixes the following checkpatch.pl warnings in ipu3.c:
WARNING: Unnecessary ftrace-like logging - prefer using ftrace
+ dev_dbg(dev, "enter %s\n", __func__);
WARNING: Unnecessary ftrace-like logging - prefer using ftrace
+ dev_dbg(dev, "leave %s\n", __func__);
WARNING: Unnecessary ftrace-like logging - prefer using ftrace
+ dev_dbg(dev, "enter %s\n", __func__);
WARNING: Unnecessary ftrace-like logging - prefer using ftrace
+ dev_dbg(dev, "leave %s\n", __func__);
Fixes: 7fc7af649ca7 ("media: staging/intel-ipu3: Add imgu top level pci device driver")
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This fixes two smatch warnings:
drivers/staging/media/atomisp/pci/atomisp_cmd.c:2779 atomisp_cp_dvs_6axis_config() warn: missing unwind goto?
drivers/staging/media/atomisp/pci/atomisp_cmd.c:2878 atomisp_cp_morph_table() warn: missing unwind goto?
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
CC: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
The subdev .s_stream() operation shall not be called to start streaming
on an already started subdev, or stop streaming on a stopped subdev.
Remove the check that guards against that condition.
Also fixes a smatch warning:
drivers/staging/media/atomisp/i2c/atomisp-gc0310.c:446 gc0310_s_stream() warn: missing error code 'ret'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
CC: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
According to H6 user manual, resets should always be de-asserted before
clocks are enabled. This is also consistent with vendor driver.
Fixes: d5aecd289bab ("media: cedrus: Implement runtime PM")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Since commit 9bf19fbf0c8b ("media: v4l: async: Rework internal lists"), aka
v6.6-rc1~97^2~198, probing the tegra-video VI driver causes infinite
recursion due tegra_vi_graph_parse_one() calling itself until:
[ 1.571168] Insufficient stack space to handle exception!
...
[ 1.591416] Internal error: kernel stack overflow: 0 [#1] PREEMPT SMP ARM
...
[ 3.861013] of_phandle_iterator_init from __of_parse_phandle_with_args+0x40/0xf0
[ 3.868497] __of_parse_phandle_with_args from of_fwnode_graph_get_remote_endpoint+0x68/0xa8
[ 3.876938] of_fwnode_graph_get_remote_endpoint from fwnode_graph_get_remote_port_parent+0x30/0x7c
[ 3.885984] fwnode_graph_get_remote_port_parent from tegra_vi_graph_parse_one+0x7c/0x224
[ 3.894158] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224
[ 3.901459] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224
[ 3.908760] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224
[ 3.916061] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224
...
[ 4.857892] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224
[ 4.865193] tegra_vi_graph_parse_one from tegra_vi_graph_parse_one+0x144/0x224
[ 4.872494] tegra_vi_graph_parse_one from tegra_vi_init+0x574/0x6d4
[ 4.878842] tegra_vi_init from host1x_device_init+0x84/0x15c
[ 4.884594] host1x_device_init from host1x_video_probe+0xa0/0x114
[ 4.890770] host1x_video_probe from really_probe+0xe0/0x400
The reason is the mentioned commit changed tegra_vi_graph_find_entity() to
search for an entity in the done notifier list:
> @@ -1464,7 +1464,7 @@ tegra_vi_graph_find_entity(struct tegra_vi_channel *chan,
> struct tegra_vi_graph_entity *entity;
> struct v4l2_async_connection *asd;
>
> - list_for_each_entry(asd, &chan->notifier.asc_list, asc_entry) {
> + list_for_each_entry(asd, &chan->notifier.done_list, asc_entry) {
> entity = to_tegra_vi_graph_entity(asd);
> if (entity->asd.match.fwnode == fwnode)
> return entity;
This is not always correct, being tegra_vi_graph_find_entity() called in
three locations, in this order:
1. tegra_vi_graph_parse_one() -- called while probing
2. tegra_vi_graph_notify_bound() -- the .bound notifier op
3. tegra_vi_graph_build() -- called in the .complete notifier op
Locations 1 and 2 are called before moving the entity from waiting_list to
done_list, thus they won't find what they are looking for in
done_list. Location 3 happens afterwards and thus it is not broken, however
it means tegra_vi_graph_find_entity() should not search in the same list
every time.
The error appears at step 1: tegra_vi_graph_parse_one() iterates
recursively until it finds the entity already notified, which now never
happens.
Fix by passing the specific notifier list pointer to
tegra_vi_graph_find_entity() instead of the channel, so each caller can
search in whatever list is correct.
Also improve the tegra_vi_graph_find_entity() comment.
Fixes: 9bf19fbf0c8b ("media: v4l: async: Rework internal lists")
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Sakari Ailus: Wrapped some long lines.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The current Kconfig symbol dependencies allow having the following Kconfig
symbol values
CONFIG_IPU_BRIDGE=m
CONFIG_VIDEO_IPU3_CIO2=y
CONFIG_CIO2_BRIDGE=n
This does not work as the IPU bridge API is conditional to
IS_ENABLED(CONFIG_IPU_BRIDGE). Fix this by changing the dependencies so
that CONFIG_IPU_BRIDGE can be separately selected.
The CONFIG_CIO2_BRIDGE symbol becomes redundant as a result and is
removed.
Fixes: 2545a2c02ba1 ("media: ipu3-cio2: allow ipu_bridge to be a module again")
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Let the V4L2 core fill this in.
Fixes this warning:
drivers/staging/media/deprecated/atmel/atmel-isc-base.c: In function 'isc_querycap':
drivers/staging/media/deprecated/atmel/atmel-isc-base.c:496:28: warning: '%s' directive output may be truncated writing up to 35 bytes into a region of size 23 [-Wformat-truncation=]
496 | "platform:%s", isc->v4l2_dev.name);
| ^~
drivers/staging/media/deprecated/atmel/atmel-isc-base.c:495:9: note: 'snprintf' output between 10 and 45 bytes into a destination of size 32
495 | snprintf(cap->bus_info, sizeof(cap->bus_info),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
496 | "platform:%s", isc->v4l2_dev.name);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Don't rely on a define, let the compiler use the actual
field size.
Remove all uses of the V4L2_SUBDEV_NAME_SIZE define and also
drop the define itself.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
This resolves a lot of the string truncate compiler warnings.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Fixes these compiler warnings:
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c: In function 'ia_css_debug_pipe_graph_dump_stage':
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2786:66: warning: '\n' directive output may be truncated writing 2 bytes into a region of size between 0 and 198 [-Wformat-truncation=]
2786 | "%s\\n%s\\n%s",
| ^~~
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2785:49: note: 'snprintf' output between 5 and 302 bytes into a destination of size 200
2785 | snprintf(enable_info, sizeof(enable_info),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2786 | "%s\\n%s\\n%s",
| ~~~~~~~~~~~~~~~
2787 | enable_info1, enable_info2,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
2788 | enable_info3);
| ~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2772:66: warning: '\n' directive output may be truncated writing 2 bytes into a region of size between 0 and 198 [-Wformat-truncation=]
2772 | "%s\\n%s\\n%s",
| ^~~
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2771:49: note: 'snprintf' output between 5 and 302 bytes into a destination of size 200
2771 | snprintf(enable_info, sizeof(enable_info),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2772 | "%s\\n%s\\n%s",
| ~~~~~~~~~~~~~~~
2773 | enable_info1, enable_info2,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
2774 | enable_info3);
| ~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2749:92: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=]
2749 | snprintf(enable_info, sizeof(enable_info), "%s\\n%s",
| ^
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2749:41: note: 'snprintf' output between 3 and 201 bytes into a destination of size 200
2749 | snprintf(enable_info, sizeof(enable_info), "%s\\n%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2750 | enable_info1, enable_info2);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
If CONFIG_FORTIFY_SOURCE=y, then this warning is produced:
In file included from ./include/linux/string.h:254,
from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/cpumask.h:5,
from ./arch/x86/include/asm/msr.h:11,
from ./arch/x86/include/asm/processor.h:23,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:9,
from ./include/linux/preempt.h:79,
from ./include/linux/spinlock.h:56,
from ./include/linux/mmzone.h:8,
from ./include/linux/gfp.h:7,
from ./include/linux/slab.h:16,
from ./drivers/staging/media/atomisp//include/hmm/hmm.h:26,
from drivers/staging/media/atomisp/pci/sh_css_params.c:26:
In function ‘fortify_memcpy_chk’,
inlined from ‘sh_css_store_sp_group_to_ddr’ at drivers/staging/media/atomisp/pci/sh_css_params.c:3736:3:
./include/linux/fortify-string.h:592:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()?
[-Wattribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The reason is that the memcpy copies two fields (each a u8), when the source
pointer points to the first field. It's a bit unexpected, so just make this
explicit.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
After recent improvements to atomisp driver, the atomisp driver
now works fine with the standard ov5693 driver.
Drop the no longer necessary atomisp specific atomisp-ov5693
sensor driver.
Link: https://lore.kernel.org/r/20230813152645.45834-2-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
ov5693 sensor modules have a VCM, but for unknown reasons
the sensor fails to start streaming when instantiating
a VCM i2c-client (and the runtime-pm link between VCM
and sensor).
Disable the VCM for now, until this is resolved.
Link: https://lore.kernel.org/r/20230813152645.45834-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Endpoint matching is now handled by the v4l2-core and drivers no longer
should set v4l2_subdev.fwnode to the endpoint fwnode.
Link: https://lore.kernel.org/r/20230812133628.355812-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Drop the VIDEO_ATOMISP_ISP2401 Kconfig option and the -DISP2401
cflags.
This is no longer necessary since all ISP2400 vs ISP2401 differences
are now dealt with at runtime.
Many thanks to Kate Hsuan for all her work on this.
Link: https://lore.kernel.org/r/20230812133523.355581-2-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
by it
ia_css_debug_dump_debug_info() is defined but never called anywhere,
drop it.
Also drop all the other ia_css_debug_dump_* functions only called by
ia_css_debug_dump_debug_info(), as well as *_get_state() functions only
used by those.
Link: https://lore.kernel.org/r/20230812133523.355581-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Replace:
if (!IS_ISP2401 || (IS_ISP2401 && xxx))
with:
if (!IS_ISP2401 || xxx)
If the right side of the '||' needs to be evaluated then it is
already known that IS_ISP2401 is true, so no need to check for it.
Link: https://lore.kernel.org/r/20230812104612.38806-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Here is the last step of #ifdef ISP2401 removal work. Since the driver
became generic, this part of the code was no longer needed and can
be removed.
Link: https://lore.kernel.org/r/20230802095606.1298152-13-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Removed #ifdef ISP2401 to make the driver generic.
Link: https://lore.kernel.org/r/20230802095606.1298152-12-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Removed #ifdef ISP2401 to allow the destroy function can destroy the
data of both types of ISP.
Link: https://lore.kernel.org/r/20230802095606.1298152-11-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
sh_css_config_input_network() is renamed to
sh_css_config_input_network_2400() and sh_css_config_input_network_2401()
since a generic driver should cover the implementation for both types.
Link: https://lore.kernel.org/r/20230802095606.1298152-10-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Removed #ifdef ISP2401 to expose ia_css_stream_configure_rx() for ISP2400.
Link: https://lore.kernel.org/r/20230802095606.1298152-9-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Removed #ifdef ISP2401 to make the driver generic. The uncessary codes
were removed and the types of the ISP is determines in runtime.
Link: https://lore.kernel.org/r/20230802095606.1298152-8-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Removed #ifdef ISP2401 to expose the necessary functions for ISP2401 and
also make the driver generic.
Link: https://lore.kernel.org/r/20230802095606.1298152-7-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
ia_css_mipi_frame_enable_check_on_size()
ia_css_mipi_frame_enable_check_on_size() wasn't used by any functions.
So, it can be removed.
Link: https://lore.kernel.org/r/20230802095606.1298152-6-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
generic
Removed #ifdef ISP2401 to make code to be generic. The driver flow is
determined in runtime.
Link: https://lore.kernel.org/r/20230802095606.1298152-5-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
generic
Removed #ifdef ISP2401 to make the driver generic.
Link: https://lore.kernel.org/r/20230802095606.1298152-4-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Removed #ifdef ISP2401 to make the driver generic. The driver flow is
determined in runtime.
Link: https://lore.kernel.org/r/20230802095606.1298152-3-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
generic
Remove #ifdef from the code and made the code generic. The raw image
configuration was determined during runtime.
Link: https://lore.kernel.org/r/20230802095606.1298152-2-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
ia_css_isys_240?_init() are only used inside the C file where they are
declared, mark them as static fixing:
drivers/staging/media/atomisp/pci/runtime/isys/src/isys_init.c:24:20:
warning: no previous prototype for 'ia_css_isys_2400_init'
24 | input_system_err_t ia_css_isys_2400_init(void)
| ^~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/runtime/isys/src/isys_init.c:87:20:
warning: no previous prototype for 'ia_css_isys_2401_init'
87 | input_system_err_t ia_css_isys_2401_init(void)
| ^~~~~~~~~~~~~~~~~~~~~
Closes: https://lore.kernel.org/oe-kbuild-all/202307152046.rvhFGrbz-lkp@intel.com/
Link: https://lore.kernel.org/r/20230715170906.3627-3-hdegoede@redhat.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
isp2400_input_system_local.h defines 2 aliases for MIPI_FORMAT_2400_CUSTOM0
MIPI_FORMAT_JPEG, which is entirely unused and MIPI_FORMAT_BINARY_8 which
is used once in ia_css_isys_2400_set_fmt_type().
Drop these aliases and directly use MIPI_FORMAT_2400_CUSTOM0 in
ia_css_isys_2400_set_fmt_type().
Link: https://lore.kernel.org/r/20230715170906.3627-2-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
isys_public.h is empty, remove it.
Link: https://lore.kernel.org/r/20230715170906.3627-1-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The original implementation distinguishes and initiates atomisp during
compiler time. This commit allows isys_init to initiate isys for both types
of atomisp in a generic manner.
Link: https://lore.kernel.org/r/20230713100231.308923-12-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The conflicts of variable declarations were resolved through previous
commits so the #if defined(ISP2401) can be removed.
Link: https://lore.kernel.org/r/20230713100231.308923-11-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Since a generic driver should support every type of atomisp, all the
codes need to be compiled. The ISP2401 flag controls the Makefile to build
the binary file for ISP2400 and ISP2401. Therefore, this section of
Makefile should be removed allowing all the necessary codes can be built.
Moreover, some parts of "removing #ifdef ISP2401" works are related to it
so they were also removed here.
Link: https://lore.kernel.org/r/20230713100231.308923-10-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Removed #if defined(ISP2401) to make driver generic.
Link: https://lore.kernel.org/r/20230713100231.308923-9-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Removed #if defined(ISP2401) to make driver generic.
Link: https://lore.kernel.org/r/20230713100231.308923-8-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
driver generic
Removed #if defined(ISP2401) to make code generic.
Link: https://lore.kernel.org/r/20230713100231.308923-7-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Removed #if defined(ISP2401) to make code generic.
Link: https://lore.kernel.org/r/20230713100231.308923-6-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
generic
Removed #if defined(2401) to make the driver generic.
Link: https://lore.kernel.org/r/20230713100231.308923-5-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Included necessary input system header files (local, private, public
scopes) for both types of atomisp. There is also a conflict of
declaration issue so the unused input_system_state_s is removed.
Link: https://lore.kernel.org/r/20230713100231.308923-4-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The original mipi_format_t represents the MIPI format settings for both
atomisp with the same name and the enum member was controlled by #if
defined(ISP2401). However, if we want to make this driver generic, this
enum should be individually defined for them.
Since the format type is redefined, the format setting function
ia_css_isys_set_fmt_type() should be reworked for ISP2400 and ISP2401
called ia_css_isys_2400_set_fmt_type() and ia_css_isys_2401_set_fmt_type()
.
Additionally, the function called is_mipi_format_yuv420() isn't used by any
functions so it can be removed.
Link: https://lore.kernel.org/r/20230713100231.308923-3-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This portion of debug code was based on a structure for both ISP2400 and
2401 with the same name and controlled by #if defined(ISP2401). This
structure was only used to dump the status of atomisp. So, to make the
driver generic, this part of debug codes can be removed.
Link: https://lore.kernel.org/r/20230713100231.308923-2-hpa@redhat.com
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The v4l2_ctrl_s_ctrl(asd->run_mode) call in atomisp_subdev_init_struct()
gets immediately overridden by a second call directly after
atomisp_subdev_init_struct() is called.
And the second call in atomisp_open() also is not helpful.
ATOMISP_RUN_MODE_PREVIEW is the default and if changed controls
are supposed to stay changed over an open/close of the /dev/video#
node. So drop both calls.
Link: https://lore.kernel.org/r/20230619105212.303653-7-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Remove the support to update a V4L2_CID_RUN_MODE run-mode control
on sensors when changing the atomisp run-mode or directly by calling
the custom ATOMISP_IOC_S_SENSOR_RUNMODE IOCTL.
No sensor drivers implement this and having custom controls / IOCTLs
is undesirable.
Even if there was such a control on sensors then userspace should directly
talk to the sensor v4l2-subdev, rather than relying on a custom IOCTLs
on the output /dev/video# node to pass this through to the senor.
Link: https://lore.kernel.org/r/20230619105212.303653-6-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add some higher resolutions to the fixed list of resolutions which
atomisp_enum_framesizes() uses on sensors which can do cropping and can
thus make any resolution that will fit.
This is useful for higher resolution sensors like the 2560x1920 ov5693
sensor.
Note the highest resolutions added here are 1920x<height> because
the atomisp firmware does not support widths > 1920 with the default
asd->run_mode->val == ATOMISP_RUN_MODE_PREVIEW setting.
Link: https://lore.kernel.org/r/20230619105212.303653-5-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
2/3th to 5/8th
Change atomisp_enum_framesizes() cut off for too small resolutions
from 2/3th to 5/8th this results in more resolutions being available
with some sensors.
E.g. this allows using 800x600 with a 1280x960 sensor.
Link: https://lore.kernel.org/r/20230619105212.303653-4-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The pipeline firmware-binaries used in previed mode have
ia_css_binary_xinfo.output.max_width set to 1920.
This causes ia_css_binary_find() to fail when trying to set a higher
resolution resulting in the dump_stack() call in ia_css_binary_find()
triggering and resulting in the try_fmt() or set_fmt() IOCTL failing.
Fix this by clamping the width to max 1920 when in preview mode.
Link: https://lore.kernel.org/r/20230619105212.303653-3-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fix missing v4l2_fh_release() in atomisp_open()'s
"if (pipe->users)" error exit path.
Closes: https://lore.kernel.org/r/202306180511.XWN0Hr7F-lkp@intel.com/
Link: https://lore.kernel.org/r/20230619105212.303653-1-hdegoede@redhat.com
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|