| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree updates from Jiri Kosina:
"Usual rocket science stuff from trivial.git"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
neighbour.h: fix comment
sched: Fix warning on make htmldocs caused by wait.h
slab: struct kmem_cache is protected by slab_mutex
doc: Fix typo in USB Gadget Documentation
of/Kconfig: Spelling s/one/once/
mkregtable: Fix sscanf handling
lp5523, lp8501: comment improvements
thermal: rcar: comment spelling
treewide: fix comments and printk msgs
IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart()
Documentation: update /proc/uptime field description
Documentation: Fix size parameter for snprintf
arm: fix comment header and macro name
asm-generic: uaccess: Spelling s/a ny/any/
mtd: onenand: fix comment header
doc: driver-model/platform.txt: fix a typo
drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text
doc: Fix typo (acces_process_vm -> access_process_vm)
treewide: Fix typos in printk
drivers/gpu/drm/qxl/Kconfig: reformat the help text
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here's the big USB pull request for 3.14-rc1
Lots of little things all over the place, and the usual USB gadget
updates, and XHCI fixes (some for an issue reported by a lot of
people). USB PHY updates as well as chipidea updates and fixes.
All of these have been in the linux-next tree with no reported issues"
* tag 'usb-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (318 commits)
usb: chipidea: udc: using MultO at TD as real mult value for ISO-TX
usb: chipidea: need to mask INT_STATUS when write otgsc
usb: chipidea: put hw_phymode_configure before ci_usb_phy_init
usb: chipidea: Fix Internal error: : 808 [#1] ARM related to STS flag
usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28
usb: chipidea: add freescale imx28 special write register method
usb: ehci: add freescale imx28 special write register method
usb: core: check for valid id_table when using the RefId feature
usb: cdc-wdm: resp_count can be 0 even if WDM_READ is set
usb: core: bail out if user gives an unknown RefId when using new_id
usb: core: allow a reference device for new_id
usb: core: add sanity checks when using bInterfaceClass with new_id
USB: image: correct spelling mistake in comment
USB: c67x00: correct spelling mistakes in comments
usb: delete non-required instances of include <linux/init.h>
usb:hub set hub->change_bits when over-current happens
Revert "usb: chipidea: imx: set CI_HDRC_IMX28_WRITE_FIX for imx28"
xhci: Set scatter-gather limit to avoid failed block writes.
xhci: Avoid infinite loop when sg urb requires too many trbs
usb: gadget: remove unused variable in gr_queue_int()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here's the big tty/serial driver pull request for 3.14-rc1
There are a number of n_tty fixes and cleanups, and some serial driver
bugfixes, and we got rid of one obsolete driver, making this series
remove more lines than added, always a nice surprise.
All of these have been in linux-next with no reports of issues"
* tag 'tty-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (60 commits)
tty/serial: at91: disable uart timer at start of shutdown
serial: 8250: enable UART_BUG_NOMSR for Tegra
tty/serial: at91: reset rx_ring when port is shutdown
tty/serial: at91: fix race condition in atmel_serial_remove
tty/serial: at91: Handle shutdown more safely
serial: sirf: correct condition for fetching dma buffer into tty
serial: sirf: provide pm entries of uart_ops
serial: sirf: use PM macro initialize PM functions
serial: clps711x: Enable driver compilation with COMPILE_TEST
serial: clps711x: Add support for N_IRDA line discipline
tty: synclink: avoid sleep_on race
tty/amiserial: avoid interruptible_sleep_on
tty: delete non-required instances of include <linux/init.h>
tty: an overflow of multiplication in drivers/tty/cyclades.c
serial: Remove old SC26XX driver
serial: add support for 200 v3 series Titan card
serial: 8250: Fix initialisation of Quatech cards with the AMCC PCI chip
tty: Removing the deprecated function tty_vhangup_locked()
TTY/n_gsm: Removing the wrong tty_unlock/lock() in gsm_dlci_release()
tty/serial: at91: document clock properties
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver tree changes from Greg KH:
"Here's the big drivers/staging/ update for 3.14-rc1
Lots and lots of cleanups, IIO driver updates are also mixed in here
due to the subsystem still crossing staging and drivers/iio/, and the
dwc2 driver is moved out of staging. There's a new driver (rts5208),
which ends up making us adding more lines than removing, but overall
there was lots of work toward moving code out of here, which was good
All of this has been in linux-next with no reported issues"
* tag 'staging-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1084 commits)
lustre: delete linux/lustre_debug.h
staging: lustre: remove some unused debug macros
usb: dwc2: move device tree bindings doc to correct place
staging: vt6656: sparse fixes: iwctl_giwgenie use memcpy.
staging: vt6656: sparse fixes: iwctl_siwgenie use memcpy.
staging: vt6656: sparse fixes ethtool_ioctl Use struct ifreq *
staging: vt6656: sparse fixes: dpc.c missing dpc.h
staging: lustre: libcfs_debug: small whitespace cleanups
staging: lustre: libcfs_debug.h: remove extra blank lines
staging: lustre: libcfs_debug.h: Align backslashes in macros
staging: lustre: libcfs_debug.h: align define values
staging: tidspbridge: adjust error return code (bugfix)
Staging: rts5139: rts51x_card: fixed style issues
staging: wlags49_h2: Fix "do not use C99 //" in wl_cs.h, wl_enc.h wl_main.h and wl_wext.h
Staging: rtl8188eu: Fixed "foo * bar" related coding style issues
Staging: rtl8188eu: Fixed required spaces after ',' and around '=' and '=='
staging: vt6655: Fix memory leak in wpa_ioctl()
imx-drm: parallel-display: honor 'native-mode' property when selecting video mode from DT
staging: drm/imx: don't drop crtc offsets when doing pageflip
staging: drm/imx: handle framebuffer offsets correctly
...
|
|
There was only one macro in here, LL_CDEBUG_PAGE(). So open code it in
the 2 places it was used so that the developer seeing it can see just
how horrid it really is, and they can remove it as I doubt it really is
ever needed anymore. But for now, keep the same functionality and
remove a whole file (with a duplicate name of other files in the lustre
repo, another confusion...)
Cc: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Odd page size checks aren't even being used, so delete them so no one
gets a bright idea to use them ever.
Cc: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
extra is in kernel space use memcpy.
sparse warning
iwctl.c:1595:42: warning: incorrect type in argument 1 (different address spaces)
iwctl.c:1595:42: expected void [noderef] <asn:1>*to
iwctl.c:1595:42: got char *extra
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
extra is in kernel space replace copy_from_user with
memcpy with no need to error check.
We already know that extra is valid by error checking
on wrq->length.
sparse warning
iwctl.c:1567:53: warning: incorrect type in argument 2 (different address spaces)
iwctl.c:1567:53: expected void const [noderef] <asn:1>*from
iwctl.c:1567:53: got char *extra
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace useraddr with direct point to struct ifreq->ifr_data
sparse warnings
main_usb.c:1443:44: warning: cast removes address space of expression
main_usb.c:1454:37: warning: incorrect type in argument 2 (different address spaces)
main_usb.c:1454:37: expected void const [noderef] <asn:1>*from
main_usb.c:1454:37: got void *useraddr
main_usb.c:1462:34: warning: incorrect type in argument 1 (different address spaces)
main_usb.c:1462:34: expected void [noderef] <asn:1>*to
main_usb.c:1462:34: got void *useraddr
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
sparse warnings
dpc.c:249:5: warning: symbol 'RXbBulkInProcessData' was not declared. Should it be static?
dpc.c:1295:6: warning: symbol 'RXvWorkItem' was not declared. Should it be static?
dpc.c:1321:6: warning: symbol 'RXvFreeRCB' was not declared. Should it be static?
dpc.c:1356:6: warning: symbol 'RXvMngWorkItem' was not declared. Should it be static?
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Just a few minor changes to make columns line up.
Signed-off-by: Salym Senyonga <salymsash@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch removes consecutive blank lines.
Signed-off-by: Salym Senyonga <salymsash@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Uniformly align backslashes to improve readability.
Signed-off-by: Salym Senyonga <salymsash@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Give all the constants a uniform alignment.
Signed-off-by: Salym Senyonga <salymsash@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The variable status is initialized to either 0 or an error code. Return
status to propagate the error value.
A simplified version of the semantic patch that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
identifier i;
constant c;
@@
-T i;
<... when != i
-i = c;
...>
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
fixed coding style issues, long lines and
extra parentheses on return statement
Signed-off-by: Morgan Creekmore <morgan.creekmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
and wl_wext.h
This patch fixed "Error: do not use C99 //" found by
checkpatch.pl in multiple files within wlags49_h2.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes all "foo * bar", "foo*bar", "foo* bar" checkpatch.pl errors for
rtl8188eu.
Signed-off-by: Tim Jester-Pfadt <t.jp@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes all spaces required after ',' and around '=' aswell as '=='
checkpatch.pl errors for rtl8188eu.
Signed-off-by: Tim Jester-Pfadt <t.jp@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a memory leak in the wpa_ioctl() error handling path so that 'param' is
also freed correctly in case of an unsupported ioctl.
Detected by Coverity: CID 144380.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
mode from DT
This patch allows to select a specific video mode from a list of modes
defined in DT by setting the 'native-mode' property appropriately.
Since all current users of this driver have only one mode defined in
their .dts files, the patch does not change the behaviour of this
driver on the affected platforms.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
CRTC offsets are only set with the initial modeset, any
subseqent pageflips assume them to be kept the same, so
we need to remember the current state until another modeset
changes it.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We didn't take the pixel format into account, so x-direction
offsets were off by a factor of 2 or 4 for 16bpp and 32bpp
framebuffers.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Even though we do not enable the hardware double buffering feature
right now, set the second base address pointer (EBA1) as well to
increase robustness.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch for ni_mio_common.c removes extra whitespace causing
checkpatch.pl warnings.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch for ni_mio_common.c fixes several indentation warnings from
checkpatch.pl.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch for ni_mio_common.c removes many unneccesary braces to fix
checkpatch.pl warnings.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds Comedi driver for Humusoft MF634 (PCIe) and
MF624 (PCI) data acquisition cards. The legacy card Humusoft
MF614 is not supported. More info about the cards may be found
at http://humusoft.cz/produkty/datacq/
The driver was tested with both cards. Everything seems to work
properly. Just the basic functionality of the card (DIO, ADC, DAC)
is supported by this driver.
Signed-off-by: Rostislav Lisovy <lisovy@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DWC2 driver should now be in good enough shape to move out of
staging. I have stress tested it overnight on RPI running mass
storage and Ethernet transfers in parallel, and for several days
on our proprietary PCI-based platform.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixed spelling typo in comment and printks
withing staging/bcm.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are leaks of resources allocated by wlan_setup() and usb_dev refcnt
on failure paths in prism2sta_probe_usb().
The patch adds appropriate deallocations and removes invalid code
from hfa384x_corereset() failure handling.
unregister_wlandev() is wrong because it is not registered yet.
hfa384x_destroy() is just noop in init state.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed a coding style issues.
Signed-off-by: Michal Kwiatkowski <michaelflowersky@geekingspree.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch for 8255.c fixes a spacing warning found by checkpatch.pl.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes two spaces at the start of the line aswell as all space after
opening parenthesis and space before closeing parenthesis checkpatch.pl warnings
in rtw_mlme.h
Signed-off-by: Tim Jester-Pfadt <t.jp@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix sparse warnings for undeclared symbols not marked static like:
148:6: warning: symbol 'enqueue_mgmt' was not declared. Should it be static?
166:16: warning: symbol 'dequeue_mgmt' was not declared. Should it be static?
Signed-off-by: Anmol Sarma <me@anmolsarma.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes the following sparse warning:
27:5: warning: symbol 'rtl8180_rates' was not declared. Should it be static?
Signed-off-by: Anmol Sarma <me@anmolsarma.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix sparse warnings for undeclared symbols not marked static like:
390:6: warning: symbol 'buffer_free' was not declared. Should it be static?
1031:5: warning: symbol 'ComputeTxTime' was not declared. Should it be static?
Signed-off-by: Anmol Sarma <me@anmolsarma.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The
will cause several issues:
- NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan
instead of lower device which misses the necessary txq synchronization for
lower device such as txq stopping or frozen required by dev watchdog or
control path.
- dev_hard_start_xmit() was called with NULL txq which bypasses the net device
watchdog.
- dev_hard_start_xmit() does not check txq everywhere which will lead a crash
when tso is disabled for lower device.
Fix this by explicitly introducing a new param for .ndo_select_queue() for just
selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also
extended to accept this parameter and dev_queue_xmit_accel() was used to do l2
forwarding transmission.
With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need
to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep
a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of
dev_queue_xmit() to do the transmission.
In the future, it was also required for macvtap l2 forwarding support since it
provides a necessary synchronization method.
Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: e1000-devel@lists.sourceforge.net
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to the dummy driver for basic carveout and chunk heaps.
Since we're generating these heaps at module_init, and we want
this driver to be generic enough to be tested on any arch, we
don't have the ability to alloc bootmem, so both of these heaps
are conventionally allocated using alloc_pages(), which limits us
to 4M in size.
Should look into using CMA for heap allocation eventually, but
this provides enough to test the basic functionality of the
heaps.
Cc: Colin Cross <ccross@android.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jesse Barker <jesse.barker@arm.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Provide a basic dummy driver to register the ion device
and to install basic SYSTEM and SYSTEM_CONTIG heaps.
This allows for basic testing with ION without having
access to drivers or systems that have been enabled to use
ION.
Cc: Colin Cross <ccross@android.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jesse Barker <jesse.barker@arm.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Comedi core now reports that a device has been attached so that
the driver itself won't need to do it any longer. The driver now
just outputs the offset of the ADC converter which is a soft indicator
of the health of the board and also the user can grep this value
from the kernel log easier for debugging purposes.
Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function usbduxsigma_getstatusinfo() returns a negative
value in case there has been a communication error with
the board. This should always work and if this communication
fails then there is something seriously wrong with the board.
This is now returned to the caller so that it can
terminte the auto attachement. The return command also prevents
printing out the offset value in case of a fault.
Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added success message to the driver autoconfig and error
message in case it fails. A success message is required
so that the user can find out which comedi driver has been
associated with which udev device. This also makes troubleshooting
much easier when more than one card is in the computer or
there is a mix of USB and PCI devices.
As Ian suggested we should report both the driver and the board
which might have different names, especially if one driver covers a
range of different boards.
Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
`comedi_free_board_dev()` is called (via `comedi_auto_unconfig()` -->
`comedi_release_hardware_device()`) when an auto-configured comedi
device is removed. This destroys the main sysfs class device and then
calls `comedi_device_cleanup()` to clean up the comedi device. For
comedi devices that have comedi subdevices that asynchronous commands,
the clean up involves destroying the sysfs class devices associated with
those subdevices.
There is a bug in the above sequence because the sysfs class devices
associated with the comedi subdevices are children of the sysfs class
device associated with the main comedi device. Therefore they will have
been automatically destroyed when the main sysfs class device is
destroyed. When they are destroyed again as part of the clean-up, they
will not be found, leading to a warning and a stack trace similar to
this:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 1213 at fs/sysfs/group.c:214
sysfs_remove_group+0x4e/0xa7()
sysfs group ffffffff817504c0 not found for kobject 'comedi4_subd0'
Modules linked in: nfsd auth_rpcgss oid_registry exportfs nfs_acl lockd
bridge stp llc sunrpc fuse binfmt_misc cpufreq_userspace sr_mod
snd_hda_codec_analog cdrom powernow_k8 kvm_amd kvm amplc_pci230(C)
8255(C) comedi(C) pcmcia xhci_hcd ehci_pci pcmcia_core ohci_pci ohci_hcd
ehci_hcd usbcore snd_hda_intel snd_hda_codec snd_pcm k8temp
snd_page_alloc 8139too snd_timer snd soundcore mii usb_common forcedeth
pata_amd
CPU: 1 PID: 1213 Comm: kworker/u4:6 Tainted: G C
3.13.0-rc5-ija1+ #20
Hardware name: System manufacturer System Product Name/M2N-E, BIOS ASUS
M2N-E ACPI BIOS Revision 5001 03/23/2010
Workqueue: sysfsd sysfs_schedule_callback_work
0000000000000000 ffff8800bf17fb38 ffffffff814672ce ffff8800bf17fb80
ffff8800bf17fb70 ffffffff8103470b ffffffff8114f780 0000000000000000
ffffffff817504c0 ffff8800bf39f410 ffff880139b68670 ffff8800bf17fbd0
Call Trace:
[<ffffffff814672ce>] dump_stack+0x45/0x56
[<ffffffff8103470b>] warn_slowpath_common+0x7a/0x93
[<ffffffff8114f780>] ? sysfs_remove_group+0x4e/0xa7
[<ffffffff8103476b>] warn_slowpath_fmt+0x47/0x49
[<ffffffff8114e92d>] ? sysfs_get_dirent_ns+0x5e/0x66
[<ffffffff8114f780>] sysfs_remove_group+0x4e/0xa7
[<ffffffff8132aac0>] dpm_sysfs_remove+0x37/0x3b
[<ffffffff81323781>] device_del+0x3e/0x173
[<ffffffff813238c3>] device_unregister+0xd/0x18
[<ffffffff8132392e>] device_destroy+0x33/0x37
[<ffffffffa0212086>] comedi_free_subdevice_minor+0x80/0x92 [comedi]
[<ffffffffa02128bb>] comedi_device_detach+0x79/0x152 [comedi]
[<ffffffffa020f223>] comedi_device_cleanup+0x36/0x57 [comedi]
[<ffffffffa020f275>] comedi_free_board_dev+0x31/0x3c [comedi]
[<ffffffffa0211f2a>] comedi_release_hardware_device+0x5a/0x73 [comedi]
[<ffffffffa0212547>] comedi_auto_unconfig+0xe/0x10 [comedi]
[<ffffffffa021357c>] comedi_pci_auto_unconfig+0x10/0x12 [comedi]
[<ffffffff811d2335>] pci_device_remove+0x40/0x8a
[<ffffffff813261d0>] __device_release_driver+0x84/0xda
[<ffffffff81326244>] device_release_driver+0x1e/0x2b
[<ffffffff811cdcb5>] pci_stop_bus_device+0x44/0x87
[<ffffffff811cdde2>] pci_stop_and_remove_bus_device+0xd/0x18
[<ffffffff811d3f3d>] remove_callback+0x20/0x2f
[<ffffffff8114d1f7>] sysfs_schedule_callback_work+0xf/0x70
[<ffffffff81049498>] process_one_work+0x1d6/0x34c
[<ffffffff81049a5f>] worker_thread+0x1cf/0x2b5
[<ffffffff81049890>] ? rescuer_thread+0x258/0x258
[<ffffffff8104e0e6>] kthread+0xd6/0xde
[<ffffffff8104e010>] ? kthread_create_on_node+0x160/0x160
[<ffffffff81472cbc>] ret_from_fork+0x7c/0xb0
[<ffffffff8104e010>] ? kthread_create_on_node+0x160/0x160
---[ end trace 94722aa2936a7adf ]---
To correct the bug, rearrange `comedi_free_board_dev()` to destroy the
main sysfs class device *after* the clean-up operation.
Thanks to Bernd Porr for finding the bug and his initial attempt to fix
it.
Reported-by: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes a style issue regarding asterisk placement in
das1800.c and das6402.c found by checkpatch.pl.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
White space clean
Remove unneeded comments.
Camel case changes
pDevice,
byRTSRsvType
byPktType
cbFrameLength
wCurrentRate
uRrvTime
uRTSTime
uCTSTime
uAckTime
uDataTime
} -> {
priv,
rsv_type
pkt_type
frame_lenght
current_rate
rrv_time
rts_time
cts_time
ack_time
data_time
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
White space clean.
Remove unneeded comments.
Camel case changes
pDevice
byPktType
cbFrameLength
wRate
bNeedAck
uDataTime
uAckTime
} -> {
priv
pkt_type
frame_length
rate
need_ack
data_time
ack_time
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the "dma-coherent" property is present in the device tree, the driver will
not perform cache invalidations. This feature significantly improves data
throughput and reduces CPU load.
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The previous "compatible" string was poorly chosen, but remains in the
match list to support existing DTBs. There is no risk for a naming clash.
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
interruptible_sleep_on is racy and going away. This replaces the
use in the gdm72xx driver with the appropriate
wait_event_interruptible_lock_irq.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
