| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
of_get_mac_address() returns a "const void*" pointer to a MAC address.
Lately, support to fetch the MAC address by an NVMEM provider was added.
But this will only work with platform devices. It will not work with
PCI devices (e.g. of an integrated root complex) and esp. not with DSA
ports.
There is an of_* variant of the nvmem binding which works without
devices. The returned data of a nvmem_cell_read() has to be freed after
use. On the other hand the return of_get_mac_address() points to some
static data without a lifetime. The trick for now, was to allocate a
device resource managed buffer which is then returned. This will only
work if we have an actual device.
Change it, so that the caller of of_get_mac_address() has to supply a
buffer where the MAC address is written to. Unfortunately, this will
touch all drivers which use the of_get_mac_address().
Usually the code looks like:
const char *addr;
addr = of_get_mac_address(np);
if (!IS_ERR(addr))
ether_addr_copy(ndev->dev_addr, addr);
This can then be simply rewritten as:
of_get_mac_address(np, ndev->dev_addr);
Sometimes is_valid_ether_addr() is used to test the MAC address.
of_get_mac_address() already makes sure, it just returns a valid MAC
address. Thus we can just test its return code. But we have to be
careful if there are still other sources for the MAC address before the
of_get_mac_address(). In this case we have to keep the
is_valid_ether_addr() call.
The following coccinelle patch was used to convert common cases to the
new style. Afterwards, I've manually gone over the drivers and fixed the
return code variable: either used a new one or if one was already
available use that. Mansour Moufid, thanks for that coccinelle patch!
<spml>
@a@
identifier x;
expression y, z;
@@
- x = of_get_mac_address(y);
+ x = of_get_mac_address(y, z);
<...
- ether_addr_copy(z, x);
...>
@@
identifier a.x;
@@
- if (<+... x ...+>) {}
@@
identifier a.x;
@@
if (<+... x ...+>) {
...
}
- else {}
@@
identifier a.x;
expression e;
@@
- if (<+... x ...+>@e)
- {}
- else
+ if (!(e))
{...}
@@
expression x, y, z;
@@
- x = of_get_mac_address(y, z);
+ of_get_mac_address(y, z);
... when != x
</spml>
All drivers, except drivers/net/ethernet/aeroflex/greth.c, were
compile-time tested.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "u16 CcxRmState[2];" array field in struct "rtllib_network" has 4
bytes in total while the operations performed on this array through-out
the code base are only 2 bytes.
The "CcxRmState" field is fed only 2 bytes of data using memcpy():
(In rtllib_rx.c:1972)
memcpy(network->CcxRmState, &info_element->data[4], 2)
With "info_element->data[]" being a u8 array, if 2 bytes are written
into "CcxRmState" (whose one element is u16 size), then the 2 u8
elements from "data[]" gets squashed and written into the first element
("CcxRmState[0]") while the second element ("CcxRmState[1]") is never
fed with any data.
Same in file rtllib_rx.c:2522:
memcpy(dst->CcxRmState, src->CcxRmState, 2);
The above line duplicates "src" data to "dst" but only writes 2 bytes
(and not 4, which is the actual size). Again, only 1st element gets the
value while the 2nd element remains uninitialized.
This later makes operations done with CcxRmState unpredictable in the
following lines as the 1st element is having a squashed number while the
2nd element is having an uninitialized random number.
rtllib_rx.c:1973: if (network->CcxRmState[0] != 0)
rtllib_rx.c:1977: network->MBssidMask = network->CcxRmState[1] & 0x07;
network->MBssidMask is also of type u8 and not u16.
Fix this by changing the type of "CcxRmState" from u16 to u8 so that the
data written into this array and read from it make sense and are not
random values.
NOTE: The wrong initialization of "CcxRmState" can be seen in the
following commit:
commit ecdfa44610fa ("Staging: add Realtek 8192 PCI wireless driver")
The above commit created a file `rtl8192e/ieee80211.h` which used to
have the faulty line. The file has been deleted (or possibly renamed)
with the contents copied in to a new file `rtl8192e/rtllib.h` along with
additional code in the commit 94a799425eee (tagged in Fixes).
Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Cc: stable@vger.kernel.org
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210323113413.29179-2-atulgopinathan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The variable "info_element" is of the following type:
struct rtllib_info_element *info_element
defined in drivers/staging/rtl8192e/rtllib.h:
struct rtllib_info_element {
u8 id;
u8 len;
u8 data[];
} __packed;
The "len" field defines the size of the "data[]" array. The code is
supposed to check if "info_element->len" is greater than 4 and later
equal to 6. If this is satisfied then, the last two bytes (the 4th and
5th element of u8 "data[]" array) are copied into "network->CcxRmState".
Right now the code uses "memcpy()" with the source as "&info_element[4]"
which would copy in wrong and unintended information. The struct
"rtllib_info_element" has a size of 2 bytes for "id" and "len",
therefore indexing will be done in interval of 2 bytes. So,
"info_element[4]" would point to data which is beyond the memory
allocated for this pointer (that is, at x+8, while "info_element" has
been allocated only from x to x+7 (2 + 6 => 8 bytes)).
This patch rectifies this error by using "&info_element->data[4]" which
correctly copies the last two bytes of "data[]".
NOTE: The faulty line of code came from the following commit:
commit ecdfa44610fa ("Staging: add Realtek 8192 PCI wireless driver")
The above commit created the file `rtl8192e/ieee80211/ieee80211_rx.c`
which had the faulty line of code. This file has been deleted (or
possibly renamed) with the contents copied in to a new file
`rtl8192e/rtllib_rx.c` along with additional code in the commit
94a799425eee (tagged in Fixes).
Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Cc: stable@vger.kernel.org
Signed-off-by: Atul Gopinathan <atulgopinathan@gmail.com>
Link: https://lore.kernel.org/r/20210323113413.29179-1-atulgopinathan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Some small staging and IIO driver fixes:
- MAINTAINERS changes for the move of the staging mailing list
- comedi driver fixes to get request_irq() to work correctly
- counter driver fixes for reported issues with iio devices
- tiny iio driver fixes for reported issues.
All of these have been in linux-next with no reported problems"
* tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vt665x: fix alignment constraints
staging: comedi: cb_pcidas64: fix request_irq() warn
staging: comedi: cb_pcidas: fix request_irq() warn
MAINTAINERS: move the staging subsystem to lists.linux.dev
MAINTAINERS: move some real subsystems off of the staging mailing list
iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
iio: hid-sensor-temperature: Fix issues of timestamp channel
iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
counter: stm32-timer-cnt: fix ceiling write max value
counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
iio: adc: ab8500-gpadc: Fix off by 10 to 3
iio:adc:stm32-adc: Add HAS_IOMEM dependency
iio: adis16400: Fix an error code in adis16400_initial_setup()
iio: adc: adi-axi-adc: add proper Kconfig dependencies
iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask
iio: hid-sensor-prox: Fix scale not correct issue
iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
|
|
Removing 2 instances of alignment warnings
drivers/staging/vt6655/rxtx.h:153:1: warning: alignment 1 of ‘struct vnt_cts’ is less than 2 [-Wpacked-not-aligned]
drivers/staging/vt6655/rxtx.h:163:1: warning: alignment 1 of ‘struct vnt_cts_fb’ is less than 2 [-Wpacked-not-aligned]
The root cause seems to be that _because_ struct ieee80211_cts is marked as __aligned(2),
this requires any encapsulating struct to also have an alignment of 2.
Fixes: 2faf12c57efe ("staging: vt665x: fix alignment constraints")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Edmundo Carmona Antoranz <eantoranz@gmail.com>
Link: https://lore.kernel.org/r/20210316181736.2553318-1-eantoranz@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was
implemented. We can safely remove it, because the kernel has grown
to have many more reliable mechanisms to determine if device is
supported or not.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
request_irq() wont accept a name which contains slash so we need to
repalce it with something else -- otherwise it will trigger a warning
and the entry in /proc/irq/ will not be created
since the .name might be used by userspace and we don't want to break
userspace, so we are changing the parameters passed to request_irq()
[ 1.565966] name 'pci-das6402/16'
[ 1.566149] WARNING: CPU: 0 PID: 184 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0
[ 1.568923] RIP: 0010:__xlate_proc_name+0x93/0xb0
[ 1.574200] Call Trace:
[ 1.574722] proc_mkdir+0x18/0x20
[ 1.576629] request_threaded_irq+0xfe/0x160
[ 1.576859] auto_attach+0x60a/0xc40 [cb_pcidas64]
Suggested-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210315195814.4692-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
request_irq() wont accept a name which contains slash so we need to
repalce it with something else -- otherwise it will trigger a warning
and the entry in /proc/irq/ will not be created
since the .name might be used by userspace and we don't want to break
userspace, so we are changing the parameters passed to request_irq()
[ 1.630764] name 'pci-das1602/16'
[ 1.630950] WARNING: CPU: 0 PID: 181 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0
[ 1.634009] RIP: 0010:__xlate_proc_name+0x93/0xb0
[ 1.639441] Call Trace:
[ 1.639976] proc_mkdir+0x18/0x20
[ 1.641946] request_threaded_irq+0xfe/0x160
[ 1.642186] cb_pcidas_auto_attach+0xf4/0x610 [cb_pcidas]
Suggested-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210315195914.4801-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the dpaa2-switch driver has basic I/O capabilities on the
switch port net_devices and multiple bridging domains are supported,
move the driver out of staging.
The dpaa2-switch driver is placed right next to the dpaa2-eth driver
since, in the near future, they will be sharing most of the data path.
I didn't implement code reuse in this patch series because I wanted to
keep it as small as possible.
Also, the README is removed from staging with the intention to add
proper rst documentation afterwards to actually match was is supported
by the driver.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Each time a switch port joins a bridge, it will start to use a FDB table
common with all the other switch ports that are under the same bridge.
This means that any VLAN added prior to a bridge join, will retain its
previous FDB table destination. With this patch, I choose to restrict
when a switch port can change it's upper device (either join or leave)
so that the driver does not have to delete all the previously installed
VLANs from the previous FDB and add them into the new one.
Thus, in the PRECHANGEUPPER notification we check if there are any VLAN
type upper devices and if that's true, deny the CHANGEUPPER.
This way, the user is not restricted in the topology but rather in the
order in which the setup is done: it must first create the bridging
domain layout and after that add the necessary VLAN devices if
necessary. The teardown is similar, the VLAN devices will need to be
destroyed prior to a change in the bridging layout.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Upon leaving a bridge, any MAC addresses learnt on the switch port prior
to this point have to be removed so that we preserve the bridging domain
configuration.
Restructure the dpaa2_switch_port_fdb_dump() function in order to have a
common dpaa2_switch_fdb_iterate() function between the FDB dump callback
and the fast age procedure. To accomplish this, add a new callback -
dpaa2_switch_fdb_cb_t - which will be called on each MAC addr and,
depending on the situation, will either dump the FDB entry into a
netlink message or will delete the address from the FDB table, in case
of the fast-age.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The DPAA2 Switch is not capable to handle traffic in a VLAN unaware
fashion, thus the previous handling of both the accepted upper devices
and the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING flag was wrong.
Fix this by checking if the bridge that we are joining is indeed VLAN
aware, if not return an error. Also, the RX VLAN filtering feature is
defined as 'on [fixed]' and the .ndo_vlan_rx_add_vid() and
.ndo_vlan_rx_kill_vid() callbacks are implemented just by recreating a
switchdev_obj_port_vlan object and then calling the same functions used
on the switchdev notifier path.
In addition, changing the vlan_filtering flag to 0 on a bridge under
which a DPAA2 switch interface is present is not supported, thus
rejected when SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING is received with
such a request.
This patch is also adding the use of the switchdev_handle_port_attr_set
function so that we can iterate through all the lower devices of the
bridge that the notification was received on and actually catch if the
user is trying to change the vlan_filtering state. Since on a VLAN
filtering change the net_device is the bridge, we also move the
dpaa2_switch_port_dev_check call so that we do not return NOTIFY_DONE
right away.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the notifier blocks register into the module_init() step, instead of
object probe, so that all DPSW devices probed by the dpaa2-switch driver
can use the same notifiers.
This will enable us to have a more straightforward approach in
determining if an event is intended for an object managed by this driver
or not. Previously, the dpaa2_switch_port_dev_check() function was
forced to also check the notifier block beside the net_device_ops
structure to determine if the event is for us or not.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Until now, the DPAA2 switch was not capable to properly setup its
switching domains depending on the existence, or lack thereof, of a
upper bridge device. This meant that all switch ports of a DPSW object
were switching by default even though they were not under the same
bridge device.
Another issue was the inability to actually add the CPU in the flooding
domains (broadcast, unknown unicast etc) of a particular switch port.
This meant that a simple ping on a switch interface was not possible
since no broadcast ARP frame would actually reach the CPU queues.
This patch tries to fix exactly these problems by:
* Creating and managing a FDB table for each flooding domain. This means
that when a switch interface is not bridged it will use its own FDB
table. While in bridged mode all DPAA2 switch interfaces under the
same upper will use the same FDB table, thus leverage the same FDB
entries.
* Adding a new MC firmware command - dpsw_set_egress_flood() - through
which the driver can setup the flooding domains as needed. For
example, when the switch interface is standalone, thus not in a
bridge with any other DPAA2 switch port, it will setup its broadcast
and unknown unicast flooding domains to only include the control
interface (the queues that reach the CPU and the driver can dequeue
from). This flooding domain changes when the interface joins a bridge
and is configured to include, beside the control interface, all other
DPAA2 switch interfaces.
We impose a minimum limit of FDB tables available equal to the number of
switch interfaces so that we guarantee that, in the maximal
configuration - all interfaces are standalone, each switch port will
have a private FDB table. At the same time, we only probe DPSW objects
that have the flooding and broadcast replicators configured to be per
FDB (DPSW_*_PER_FDB). Without this, the dpaa2-switch driver would not
be able to configure multiple switching domains.
At probe time, a FDB table will be allocated for each port. At a bridge
join event, the switch port will either continue to use the current FDB
table (if it's the first dpaa2-switch port to join that bridge) or will
switch to use the FDB table associated with the port that it's already
under the bridge. If a FDB switch is necessary, the private FDB table
which was previously used will be returned to the pool of unused FDBs.
Upon a bridge leave, the switch port needs a private FDB table thus it
will search and get the first unused FDB table. This way, all the other
ports remaining under the bridge will continue to use the same FDB
table.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable the CTRL_IF of the switch object, now that all the pieces are in
place (buffer and queue management, interrupts, NAPI instances etc).
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement the .ndo_start_xmit() callback for the switch port interfaces.
For each of the switch ports, gather the corresponding queue
destination ID (QDID) necessary for Tx enqueueing.
We'll reserve 64 bytes for software annotations, where we keep a skb
backpointer used on the Tx confirmation side for releasing the allocated
memory. At the moment, we only support linear skbs.
Also, add support for the Tx confirmation path which for the most part
shares the code path with the normal Rx queue.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The dpaa2-ethsw supports only one Rx queue that is shared by all switch
ports. This means that information about which port was the ingress port
for a specific frame needs to be passed in metadata. In our case, the
Flow Context (FLC) field from the frame descriptor holds this
information. Besides the interface ID of the ingress port we also
receive the virtual QDID of the port. Below is a visual description of
the 64 bits of FLC.
63 47 31 15 0
+---------------------------------------------------+
| | | | |
| RESERVED | IF_ID | RESERVED | IF QDID |
| | | | |
+---------------------------------------------------+
Because all switch ports share the same Rx and Tx conf queues, NAPI
management takes into consideration when there is at least one switch
interface open to enable the NAPI instance.
The Rx path is common, for the most part, for both Rx and Tx conf with
the mention that each of them has its own consume function of a frame
descriptor. Dequeueing from a FQ, consuming dequeued store and also the
NAPI poll function is common between both queues.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Setup interrupts on the control interface queues. We do not force an
exact affinity between the interrupts received from a specific queue and
a cpu.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allocate and setup a buffer pool, needed on the Rx path of the control
interface. Also, define the Rx buffer size seen by the WRIOP from the
PAGE_SIZE buffers seeded.
Also, create the needed Rx rings for both frame queues used on the
control interface. On the Rx path, when a pull-dequeue operation is
performed on a software portal, available frame descriptors are put in a
ring - a DMA memory storage - for further usage.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce a new structure to hold all necessary info related to an RX
queue for the control interface and populate the FQ IDs.
We only have one Rx queue and one Tx confirmation queue on the control
interface, both shared by all the switch ports.
Also, increase the minimum version of the object supported by the driver
since for a basic switch driver support we'll be in need for some ABIs
added in the latest version of firmware.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the dpaa2-switch already listens for SWITCHDEV_FDB_ADD_TO_DEVICE /
SWITCHDEV_FDB_DEL_TO_DEVICE events emitted by the bridge, we don't need
the bridge bypass operations, and now is a good time to delete them. All
'bridge fdb' commands need the 'master' flag specified now.
In fact, having the obsolete .ndo_fdb_{add|del} callbacks would even
complicate the bridge leave/join procedures without any real benefit.
Every FDB entry is installed in an FDB ID as far as the hardware is
concerned, and the dpaa2-switch ports change their FDB ID when they join
or leave a bridge. So we would need to manually delete these FDB entries
when the FDB ID changes. That's because, unlike FDB entries added
through switchdev, where the bridge automatically deletes those on
leave, there isn't anybody who will remove the static FDB entries
installed via the bridge bypass operations upon a change in the upper
device.
Note that we still need .ndo_fdb_dump though. The dpaa2-switch does not
emit any interrupts when a new address is learnt, so we cannot keep the
bridge FDB in sync with the hardware FDB. Therefore, we need this
callback to get a chance to print the FDB entries that were dynamically
learnt by our hardware.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
By default, the DPSW object is configured with VLAN ID 1 in the VLAN
table, which all ports are member of. This entry in the VLAN table
selects the same FDB ID for all ports, meaning that forwarding between
ports is permitted. This is unlike the switchdev model, where each port
should operate as standalone by default.
To make the switch operate in standalone ports mode, we need the VLAN
table to select a unique FDB ID for each port. In order to do that, we
need to simply delete the VLAN 1 created automatically by firmware, and
let dpaa2_switch_port_init take over, by readding VLAN ID 1, but
pointing towards a unique FDB ID.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch is removing the current configuration of learning and
flooding states per switch port because they are essentially broken in
terms of integration with the switchdev APIs and the bridge
understanding of these states.
First of all, the learning state is a per switch port configuration
while the dpaa2-switch driver was using it to configure the entire
bridging domain. This is broken since the software learning state could
be out of sync with the hardware state when ports from the same bridging
domain are configured by the user with different learning parameters.
The BR_FLOOD flag has been misinterpreted as well. Instead of denoting
whether unicast traffic for which there is no FDB entry will be flooded
towards a given port, the dpaa2-switch used the flag to configure
whether or not a frame with an unknown destination received on a given
port should be flooded or not. In summary, it was used as ingress
setting instead of a egress one.
Also, remove the unnecessary call to dpsw_if_set_broadcast() and the API
definition. The HW default is to let all switch ports to be able to
flood broadcast traffic thus there is no need to call the API again.
Instead of trying to patch things up, just remove the support for the
moment so that we'll add it back cleanly once the driver is out of
staging.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 314fd52f01ead9528a5cda5a868425bb736d93a2.
It turns .h files into non-stand-alone when building, which might cause
problems in the long-run.
Reported-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Cc: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This code has a check to prevent read overflow but it needs another
check to prevent writing beyond the end of the ->ssid[] array.
Fixes: a2c60d42d97c ("staging: r8188eu: Add files for new driver - part 16")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YEHymwsnHewzoam7@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "ie_len" is a value in the 1-255 range that comes from the user. We
have to cap it to ensure that it's not too large or it could lead to
memory corruption.
Fixes: 9a7fe54ddc3a ("staging: r8188eu: Add source files for new driver - part 1")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YEHyQCrFZKTXyT7J@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need to cap len at IW_ESSID_MAX_SIZE (32) to avoid memory corruption.
This can be controlled by the user via the ioctl.
Fixes: 5f53d8ca3d5d ("Staging: add rtl8192SU wireless usb driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YEHoAWMOSZBUw91F@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The pcl726 driver has an "interrupt" subdevice that supports Comedi
asynchronous commands, placing a value in the Comedi buffer for each
interrupt. The subdevice uses Comedi's 16-bit sample format but the
interrupt handler is calling `comedi_buf_write_samples()` with the
address of a 32-bit integer `&s->state`. On bigendian machines, this
will copy 2 bytes from the wrong end of the 32-bit integer. This isn't
really a problem since `s->state` will always be 0 for this subdevice,
but clean it up by using a 16-bit variable initialized to 0 to pass the
value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210223143055.257402-15-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ni_65xx driver has an "interrupt" subdevice that supports Comedi
asynchronous commands, placing a value in the Comedi buffer for each
interrupt. The subdevice uses Comedi's 16-bit sample format but the
interrupt handler is calling `comedi_buf_write_samples()` with the
address of a 32-bit integer `&s->state`. On bigendian machines, this
will copy 2 bytes from the wrong end of the 32-bit integer. This isn't
really a problem since `s->state` will always be 0 for this subdevice,
but clean it up by using a 16-bit variable initialized to 0 to pass the
value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210223143055.257402-14-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ni_6527 driver has an "interrupt" subdevice that supports Comedi
asynchronous commands, placing a value in the Comedi buffer for each
interrupt. The subdevice uses Comedi's 16-bit sample format but the
interrupt handler is calling `comedi_buf_write_samples()` with the
address of a 32-bit integer `&s->state`. On bigendian machines, this
will copy 2 bytes from the wrong end of the 32-bit integer. This isn't
really a problem since `s->state` will always be 0 for this subdevice,
but clean it up by using a 16-bit variable initialized to 0 to pass the
value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210223143055.257402-13-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The comedi_parport driver has an "interrupt" subdevice that supports
Comedi asynchronous commands, placing a value in the Comedi buffer for
each interrupt. The subdevice uses Comedi's 16-bit sample format but
the interrupt handler is calling `comedi_buf_write_samples()` with the
address of a 32-bit integer `&s->state`. On bigendian machines, this
will copy 2 bytes from the wrong end of the 32-bit integer. This isn't
really a problem since `s->state` will always be 0 for this subdevice,
but clean it up by using a 16-bit variable initialized to 0 to pass the
value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210223143055.257402-12-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Amplicon PC36AT/PCI236 common driver has an "interrupt" subdevice
that supports Comedi asynchronous commands, placing a value in the
Comedi buffer for each interrupt. The subdevice uses Comedi's 16-bit
sample format but the interrupt handler is calling
`comedi_buf_write_samples()` with the address of a 32-bit integer
`&s->state`. On bigendian machines, this will copy 2 bytes from the
wrong end of the 32-bit integer. This isn't really a problem since
`s->state` will always be 0 for this subdevice, but clean it up by using
a 16-bit variable initialized to 0 to pass the value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210223143055.257402-11-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format. However, the call to
`comedi_buf_write_samples()` is passing the address of a 32-bit integer
parameter. On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value. Fix it by changing the type of the parameter
holding the sample value to `unsigned short`.
[Note: the bug was introduced in commit edf4537bcbf5 ("staging: comedi:
pcl818: use comedi_buf_write_samples()") but the patch applies better to
commit d615416de615 ("staging: comedi: pcl818: introduce
pcl818_ai_write_sample()").]
Fixes: d615416de615 ("staging: comedi: pcl818: introduce pcl818_ai_write_sample()")
Cc: <stable@vger.kernel.org> # 4.0+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210223143055.257402-10-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format. However, the call to
`comedi_buf_write_samples()` is passing the address of a 32-bit integer
variable. On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value. Fix it by changing the type of the variable
holding the sample value to `unsigned short`.
Fixes: 1f44c034de2e ("staging: comedi: pcl711: use comedi_buf_write_samples()")
Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210223143055.257402-9-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format. However, the calls to
`comedi_buf_write_samples()` are passing the address of a 32-bit integer
variable. On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value. Fix it by changing the type of the variable
holding the sample value to `unsigned short`.
Fixes: de88924f67d1 ("staging: comedi: me4000: use comedi_buf_write_samples()")
Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210223143055.257402-8-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format. However, the call to
`comedi_buf_write_samples()` is passing the address of a 32-bit integer
variable. On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value. Fix it by changing the type of the variable
holding the sample value to `unsigned short`.
[Note: the bug was introduced in commit 1700529b24cc ("staging: comedi:
dmm32at: use comedi_buf_write_samples()") but the patch applies better
to the later (but in the same kernel release) commit 0c0eadadcbe6e
("staging: comedi: dmm32at: introduce dmm32_ai_get_sample()").]
Fixes: 0c0eadadcbe6e ("staging: comedi: dmm32at: introduce dmm32_ai_get_sample()")
Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210223143055.257402-7-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format. However, the call to
`comedi_buf_write_samples()` is passing the address of a 32-bit integer
variable. On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value. Fix it by changing the type of the variable
holding the sample value to `unsigned short`.
Fixes: ad9eb43c93d8 ("staging: comedi: das800: use comedi_buf_write_samples()")
Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210223143055.257402-6-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format. However, the call to
`comedi_buf_write_samples()` is passing the address of a 32-bit integer
variable. On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value. Fix it by changing the type of the variable
holding the sample value to `unsigned short`.
Fixes: d1d24cb65ee3 ("staging: comedi: das6402: read analog input samples in interrupt handler")
Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210223143055.257402-5-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The analog input subdevice supports Comedi asynchronous commands that
use Comedi's 16-bit sample format. However, the calls to
`comedi_buf_write_samples()` are passing the address of a 32-bit integer
variable. On bigendian machines, this will copy 2 bytes from the wrong
end of the 32-bit value. Fix it by changing the type of the variables
holding the sample value to `unsigned short`. The type of the `val`
parameter of `pci1710_ai_read_sample()` is changed to `unsigned short *`
accordingly. The type of the `val` variable in `pci1710_ai_insn_read()`
is also changed to `unsigned short` since its address is passed to
`pci1710_ai_read_sample()`.
Fixes: a9c3a015c12f ("staging: comedi: adv_pci1710: use comedi_buf_write_samples()")
Cc: <stable@vger.kernel.org> # 4.0+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210223143055.257402-4-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The digital input subdevice supports Comedi asynchronous commands that
read interrupt status information. This uses 16-bit Comedi samples (of
which only the bottom 8 bits contain status information). However, the
interrupt handler is calling `comedi_buf_write_samples()` with the
address of a 32-bit variable `unsigned int status`. On a bigendian
machine, this will copy 2 bytes from the wrong end of the variable. Fix
it by changing the type of the variable to `unsigned short`.
Fixes: a8c66b684efa ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions")
Cc: <stable@vger.kernel.org> #4.0+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210223143055.257402-3-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Change-Of-State (COS) subdevice supports Comedi asynchronous
commands to read 16-bit change-of-state values. However, the interrupt
handler is calling `comedi_buf_write_samples()` with the address of a
32-bit integer `&s->state`. On bigendian architectures, it will copy 2
bytes from the wrong end of the 32-bit integer. Fix it by transferring
the value via a 16-bit integer.
Fixes: 6bb45f2b0c86 ("staging: comedi: addi_apci_1032: use comedi_buf_write_samples()")
Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20210223143055.257402-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The user can specify a "req->essid_len" of up to 255 but if it's
over IW_ESSID_MAX_SIZE (32) that can lead to memory corruption.
Fixes: 13a9930d15b4 ("staging: ks7010: add driver from Nanonote extra-repository")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YD4fS8+HmM/Qmrw6@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Function r8712_sitesurvey_cmd calls memcpy without checking the length.
A user could control that length and trigger a buffer overflow.
Fix by checking the length is within the maximum allowed size.
Signed-off-by: Lee Gibson <leegib@gmail.com>
Link: https://lore.kernel.org/r/20210301132648.420296-1-leegib@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Function _rtl92e_wx_set_scan calls memcpy without checking the length.
A user could control that length and trigger a buffer overflow.
Fix by checking the length is within the maximum allowed size.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Gibson <leegib@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210226145157.424065-1-leegib@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The memdup_user() function does not necessarily return a NUL terminated
string so this can lead to a read overflow. Switch from memdup_user()
to strndup_user() to fix this bug.
Fixes: c6dc001f2add ("staging: r8712u: Merging Realtek's latest (v2.6.6). Various fixes.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YDYSR+1rj26NRhvb@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When RTLLIB_CRYPTO_TKIP is enabled and CRYPTO is disabled,
Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for CRYPTO_MICHAEL_MIC
Depends on [n]: CRYPTO [=n]
Selected by [m]:
- RTLLIB_CRYPTO_TKIP [=m] && STAGING [=y] && RTLLIB [=m]
WARNING: unmet direct dependencies detected for CRYPTO_LIB_ARC4
Depends on [n]: CRYPTO [=n]
Selected by [m]:
- RTLLIB_CRYPTO_TKIP [=m] && STAGING [=y] && RTLLIB [=m]
- RTLLIB_CRYPTO_WEP [=m] && STAGING [=y] && RTLLIB [=m]
This is because RTLLIB_CRYPTO_TKIP selects CRYPTO_MICHAEL_MIC and
CRYPTO_LIB_ARC4, without depending on or selecting CRYPTO,
despite those config options being subordinate to CRYPTO.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Link: https://lore.kernel.org/r/20210222180607.399753-1-julianbraha@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted stuff pile - no common topic here"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
whack-a-mole: don't open-code iminor/imajor
9p: fix misuse of sscanf() in v9fs_stat2inode()
audit_alloc_mark(): don't open-code ERR_CAST()
fs/inode.c: make inode_init_always() initialize i_ino to 0
vfs: don't unnecessarily clone write access for writable fds
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull Simple Firmware Interface (SFI) support removal from Rafael Wysocki:
"Drop support for depercated platforms using SFI, drop the entire
support for SFI that has been long deprecated too and make some
janitorial changes on top of that (Andy Shevchenko)"
* tag 'sfi-removal-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/platform/intel-mid: Update Copyright year and drop file names
x86/platform/intel-mid: Remove unused header inclusion in intel-mid.h
x86/platform/intel-mid: Drop unused __intel_mid_cpu_chip and Co.
x86/platform/intel-mid: Get rid of intel_scu_ipc_legacy.h
x86/PCI: Describe @reg for type1_access_ok()
x86/PCI: Get rid of custom x86 model comparison
sfi: Remove framework for deprecated firmware
cpufreq: sfi-cpufreq: Remove driver for deprecated firmware
media: atomisp: Remove unused header
mfd: intel_msic: Remove driver for deprecated platform
x86/apb_timer: Remove driver for deprecated platform
x86/platform/intel-mid: Remove unused leftovers (vRTC)
x86/platform/intel-mid: Remove unused leftovers (msic)
x86/platform/intel-mid: Remove unused leftovers (msic_thermal)
x86/platform/intel-mid: Remove unused leftovers (msic_power_btn)
x86/platform/intel-mid: Remove unused leftovers (msic_gpio)
x86/platform/intel-mid: Remove unused leftovers (msic_battery)
x86/platform/intel-mid: Remove unused leftovers (msic_ocd)
x86/platform/intel-mid: Remove unused leftovers (msic_audio)
platform/x86: intel_scu_wdt: Drop mistakenly added const
|
