| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The only caller of issue_probereq_ex does not check the return value. We
can remove it and make issue_probereq_ex a void function.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20221126154253.178275-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The skb is delivered to netif_rx() in rtllib_monitor_rx(), which may free it,
after calling this, dereferencing skb may trigger use-after-free.
Found by Smatch.
Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20221123081253.22296-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
int_log is initialized and incremented but never evaluated. Remove
resulting dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/e2edcde052cc3c47e6e6b94d09e460b8cf6a49a8.1669156825.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ChannelAccessSetting is never used. Remove resulting dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/b88a31954532f47a4caf9abfcad8e20b32a618cc.1669156825.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
initialized_at_probe is initialized and never used. Remove resulting dead
code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/4855b2dd5b7296b0eb10e697f605fb820e1dfc7b.1669156825.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
skb_aggQ is initialized, never used and purged. Remove resulting dead
code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/3197be3cb412eea1c662a5bec1b1afda2cee675d.1669156825.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
AcmMethod is initialized and never changed. The evaluation will always
have the same result. Remove resulting dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/7d73a66184e13d5f8d4af7d21564032247a7e923.1669156825.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We cannot dereference the "skb" pointer after calling
ieee80211_monitor_rx(), because it is a use after free.
Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y33BArx3k/aw6yv/@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tools/lib/bpf/ringbuf.c
927cbb478adf ("libbpf: Handle size overflow for ringbuf mmap")
b486d19a0ab0 ("libbpf: checkpatch: Fixed code alignments in ringbuf.c")
https://lore.kernel.org/all/20221121122707.44d1446a@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
2nd set of IIO new device support, cleanups etc for 6.2
Includes a few late breaking fixes for old issues.
Contains a large set of conversions from i2c probe() to probe_new()
as part of an attempt to finally get rid of the old style probe().
New devices support
* adi,ad74115
- New driver for this complex input/output device with 16 bit ADCs,
14 bit DACs amongst other features.
- A few tidy ups / removal of unused data patches followed.
* adi,adf4377
- New driver for this dual output integer-N phased locked loop and VCO
chip.
* maxim,max30208
- New driver for this high accuracy digital temperature sensor.
* st,lsm6dsx
- Support for LSM6DS016IS (chip specific data)
- Support for ISM330IS (id entry only)
Minor cleanups etc
* adi,adis
- Fix a deadlock on device instance specific mutex.
- Tidy up by calling unlocked form of __adis_initial_startup() in all
cases and dropping the locked version.
* adi,ad4130
- Reference spi-peripehral-props.yaml in the dt-binding.
* adi,ad74413r
- Fix a bug brought on by integer promotion of signed value to unsigned type.
- Add an spi_device_id table to allow module autoloading to work.
- Add support for reset pin.
* adi,ad7606_par
- devm_platform_get_and_ioremap_resource() instead of opencoding.
* adi,ad7923
- Add dt-bindings docs for ad7927 via a fallback to ad7928 and do similar
for ad7924.
* adi,ltc2983
- Drop a now unneeded $ref for -nanoamp property as dt-schema no covers this
unit.
* maxim,max11410
- Fix mask due to repeated use of VREFN instead of one of them being VREFP.
* qcom,spmi-iadc
- Add fallback compatibles to dt-binding.
* renesas,rzg2l
- Document use for RZ/Five SoC.
* st,stm32-adc
- Improved calibration support with error logging and a debugfs
interface to read back the result.
* ti,adc128s052
- Fix an issue with missing data members in the adc128_of_match table that
meant all device were being handled as adc128s052 ADCs.
* tag 'iio-for-6.2b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (178 commits)
iio: addac: ad74413r: fix blank line after declaration warning
iio: addac: ad74115: remove unused ad74115_dac_slew_rate_hz_tbl
dt-bindings: iio: imu: st_lsm6dsx: add ism330is
iio: imu: st_lsm6dsx: add support to ISM330IS
iio: frequency: adf4377: add support for ADF4377
dt-bindings: iio: frequency: add adf4377 doc
dt-bindings: iio: adc: ad4130: use spi-peripheral-props.yaml
dt-bindings: iio: temperature: ltc2983: drop $ref for -nanoamp properties
dt-bindings: iio: adc: renesas,rzg2l-adc: Document RZ/Five SoC
iio: adc128s052: add proper .data members in adc128_of_match table
iio: adc: stm32-adc: add debugfs to read raw calibration result
iio: adc: stm32-adc: improve calibration error log
iio: adc: stm32-adc: smart calibration support
iio: addac: ad74413r: add support for reset-gpio
dt-bindings: iio: ad74413r: add optional reset-gpios
iio: addac: ad74413r: add spi_device_id table
dt-bindings: iio/adc: qcom,spmi-iadc: use double compatibles
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dso16is
iio: imu: st_lsm6dsx: add support to LSM6DSO16IS
iio: addac: add AD74115 driver
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, feature and cleanup for 6.2 (take2)
We have finally managed to take the mlock mutex entirely private so as
to avoid it being used for multiple purposes. Now it is just used to
protect device mode transitions (typically to and from buffered capture).
Includes merge of an immutable i2c branch to get the new
i2c_client_get_device_id() (thanks to Wolfram for providing the branch).
Based on rc3 to pick up some precursor fixes from early in the cycle and
avoid an unnecessarily messy history.
New device support
* adi,ad4310
- New driver to support this very flexible measurement device including
a 24 bit ADC. Later fix for documentation build issue.
* adi,adxl355
- Add support of the ADXL359 accelerometer.
* adi,ltc2983
- Support additional variants of the temperatures sensor:
LTC2984 with an EEPROM
LTC2985, LTC2986 with only 10 channels.
* invensense,icm42600
- Add support for icm42631 (needed only ID and WHOAMI)
* kionix,kx022a
- New driver for this 3 axis accelerometer.
* maxim,max11401
- New driver to support this 24-bit 10 channel ADC.
Includes some new ABI to support configuration of notch filters.
* mediatek,mt6370
- Add new driver to support the ADC part of the mt6370.
* st,lsm6dsx
- Add support for LSM6DSV accelerometer and gyroscope. Simple additional
of chip specific data and IDs.
- Add support for LSM6DSV16X accelerometer and gyroscope. Compatible with
features currently implemented for the LSM6DSV.
* st,stm32-adc
- Add support for stm32pm13x SoCs.
core / subsystem wide:
- Add new IIO_STATIC_CONST_DEVICE_ATTR() which is a dance necessary to
allow for the wrapping of attributes in the code that duplicates them
for multiple buffers.
- Harden against future issues with expectation that all buffer attributes
are iio_dev_attrs by changing the code to take an array of pointers
of the correct type.
- Last transitions of drivers to local locks rather than missuses of mlock.
- Add an iio_device_claim_buffer_mode() callback to avoid a race in the
max30100 driver without directly using mlock.
- Move mlock to the opaque IIO device structure to prevent misuse.
- Add missing spi_device_id tables to support auto loading of modules.
- Update some ADI maintainers in DT bindings.
- A few more moves of bus drivers and core module sets to export
name spaces.
- Extensive use of new devm_regulator_get_enable() and friends.
- Switch a bunch of i2c drivers to probe_new() including the bmp280
which makes use of the new i2c_client_get_device_id() helper to
simplify this change.
dt-bindings:
- More use of spi-peripheral-props.yaml.
Features
* freescale,mpl115
- Use runtime PM to implement shutdown GPIO support.
* melexis,mlx90632
- More sophisticated runtime power management
- Provide access to sampling frequency.
- Trivial follow up fixes.
* microchip,mcp3911
- Support control of PGA.
* st,lsm6dsx
- Add support for software triggers for cases where the IRQ lines
are not wired up.
* vishay,vcnl4000
- Add control of integration time.
Minor cleanups and fixes
* adi,ad4130
- Improve ABI documentation formatting.
- Kconfig dependency fixup.
* adi,ad5758
- Minor dt binding fix.
* adi,ad9834
- Tidy up line breaks.
* adi,ade7854
- Minor improvement in code clarity by replacing a ternary.
* adi,admv8818
- Harden code against hardware returning wrong values.
* adi,adxl355
- Warn only if unknown device ID detected to allow for fall back
device tree compatibles on future devices.
* adi,ltc2983
- dt-bindings clarifications and general improvements.
- Ensure DMA safe buffer for bulk writes without relying on current
regmap implementation choices.
* avago,adps9960
- Fix up a disconnect between event enable attributes and what was
enabled.
* bosch,bma400
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* cosmic,cc10001
- Fully devm managed probe() and related tidying up.
* meas,ms5611
- Add an example of spi-max-frequency.
* meleixs,mlx90632
- Tidy up confusing error return value.
- Style improvements.
* multiplexer
- Switch to dev_err_probe() from open coded EPROBE_DEFER handling.
* qcom,spmi-vadc
- Minor dt binding improvements.
* rockchip,saradc
- Add ID for rv1126.
* semtech,sx9360
- Add SAMM0208 ACPI ID. Doesn't appear to be a valid vendor prefix
but is in the wild.
* st,lsm6dsx
- Factor out common code as _device_set_enable().
- Fix up wrong docs after LSM6DSV addition.
* st,stm32-adc
- Manage the min sampling time on all internal channels.
* trig,sysfs
- Improve error labels.
* tag 'iio-for-6.2a-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (146 commits)
iio: pressure: bmp280: convert to i2c's .probe_new()
iio: imu: st_lsm6dsx: fix LSM6DSV sensor description
iio: adc: ad4130: depend on GPIOLIB
staging: iio: meter: replace ternary operator by if condition
iio: light: apds9960: Fix iio_event_spec structures
dt-bindings: iio: imu: Add inv_icm42600 documentation
iio: imu: inv_icm42600: Add support for icm42631
dt-bindings: iio: adc: rockchip-saradc: Add saradc for rv1126
dt-bindings: iio: dac: adi,ad5758: Drop 'contains' from 'adi,dc-dc-mode'
dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsv16x
iio: imu: st_lsm6dsx: add support to LSM6DSV16X
iio: proximity: sx9360: Add a new ACPI hardware ID
iio: temperature: mlx90632: Add missing static marking on devm_pm_ops
iio: temperature: mlx90632: Add error handling for devm_pm_runtime_enable()
iio: temperature: ltc2983: support more parts
dt-bindings: iio: temperature: ltc2983: support more parts
dt-bindings: iio: temperature: ltc2983: use generic node name in example
dt-bindings: iio: temperature: ltc2983: describe broken mux delay property
dt-bindings: iio: temperature: ltc2983: refine descriptions
dt-bindings: iio: temperature: ltc2983: change default excitation for custom thermistors
...
|
|
The cacheflush import is never used, so it is safe to remove it as an
import.
Signed-off-by: Ian Cowan <ian@linux.cowan.aero>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The imx7-media-csi driver, currently in staging, is ready for
prime-time. The staging TODO file lists a few items specific to that
driver, that are already addressed (the "all of the above" part) or can
be addressed later:
- The frame interval monitoring support is a software mechanism to
monitor the device for unexpected stalls, and should be part of the
V4L2 core if desired.
- Restricting the support media bus formats based on the SoC integration
only aims at reducing userspace confusion by not enumerating options
that are known not to be possible, it won't cause regressions if
handled later.
Move the description of the media bus format restriction TODO item to
the driver, drop the other TODO items, and move the driver out of
staging.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The imx8mq-mipi-csi2 driver targets SoCs that also run the
imx7-media-csi driver, but they are distinct. Decouple them in Kconfig
to prepare for destaging of the imx7-media-csi driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Commit 9babbbaaeb87 ("media: imx: imx7-media-csi: Use dual sampling for
YUV 1X16") set BIT_MIPI_DOUBLE_CMPNT in the CR18 register for 16-bit YUV
formats in imx7_csi_configure(). The CR18 register is always updated
with read-modify-write cycles, so if a 16-bit YUV format is selected,
the bit will stay set forever, even if the format is changed. Fix it by
clearing the bit at the beginning of the imx7_csi_configure() function.
While at it, swap two of the bits being cleared to match the MSB to LSB
order. This doesn't cause any functional change.
Fixes: 9babbbaaeb87 ("media: imx: imx7-media-csi: Use dual sampling for YUV 1X16")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
All the phys variables and structure fields store a DMA address, not a
physical address. Even if the two are effectively identical on all
platforms where this driver is used due to the lack of IOMMU, rename the
variables to dma_addr to make their usage clearer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The phys variable is only used as a local loop variable in
imx7_csi_setup_vb2_buf(), with each entry in the array being used in the
corresponding iteration of the loop only. Move it to loop scope,
simplifying the array to a single variable.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The CSI hardware compatible with this driver handles buffers using a
ping-pong mechanism with two sets of destination addresses. Normally,
when an interrupt comes in to signal the completion of one buffer, say
FB1, it assigns the next buffer in the queue to the next FB1, and the
hardware starts to capture into FB2 in the meantime.
In a buffer underrun situation, in the above example without loss of
generality, if a new buffer is queued before the interrupt for FB1 comes
in, we can program the buffer into FB2 (which is programmed with a dummy
buffer, as there is a buffer underrun).
This of course races with the interrupt that signals FB1 completion, as
once that interrupt comes in, we are no longer guaranteed that the
programming of FB2 was in time and must assume it was too late. This
race is resolved partly by locking the programming of FB2. If it came
after the interrupt for FB1, then the variable that is used to determine
which FB to program would have been swapped by the interrupt handler.
This alone isn't sufficient, however, because the interrupt could still
be generated (thus the hardware starts capturing into the other fb)
while the fast-tracking routine has the irq lock. Thus, after
programming the fb register to fast-track the buffer, the isr also must
be checked to confirm that an interrupt didn't come in the meantime. If
it has, we must assume that programming the register for the
fast-tracked buffer was not in time, and queue the buffer normally.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
<linux/gcd.h> is not needed for this driver. Remove the corresponding
#include.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The list contains the Bayer scale index, and rational fraction of it.
The struct u32_fract is suitable type to hold that. Convert the driver
to use latter instead of former.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The ov2680_720p_30fps register init list used for the 1296x736 resolution
sets the hsize register to 1296 and the vsize register to 736.
This is actually the right thing to do when combined with the atomISP2
because the ISP requires 16 bytes padding leaving userspace to see
1280x720.
But the resolution list entries for this was incorrectly reporting
the resolution being send to the ISP as already being 1280x720,
leaving usespace to see 1274x704 as resolution.
Worse then userspace seeing a weird resolution selecting the
1280x720 sensor resolution (which in reality is sending 1296x736)
to the ISP was causing the ISP to hang on Cherry Trail based tablets
(Bay Trail works fine for some reason).
This commit also adds a bunch of comments annotating what
the various register writes the init lists are doing.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_ospm_dphy_up() is an empty function now and
atomisp_ospm_dphy_down() contains a couple of checks + goto done
statements which don't matter since the function always ends up at
the done label regardless and then it does 1 pci-config write.
Move the single pci-config write directly to atomisp_power_off()
and remove the atomisp_ospm_dphy_up()/_down() functions.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The only thing which atomisp_ospm_dphy_down() does is disable the CSI
pins, but if we failed to probe the ISP then these will never have
been enabled (because the ISP never started streaming).
So the atomisp_ospm_dphy_down() call in the probe error path is
unnecessary, remove it.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_css_init() is always called after calling atomisp_power_on()
either directly or through getting a runtime-pm reference.
Likewise atomisp_css_uninit() is always called after calling
atomisp_power_off().
Move the call site of these 2 functions to inside atomisp_power_on() /
atomisp_power_off() to make this more explicit.
Note this makes atomisp_reset() also set isp_fatal_error on
atomisp_power_on() errors, where as before it only did this on
atomisp_css_init() errors. This behavior change is for the better,
since power-on failing is pretty fatal too.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_suspend() contains a 1:1 copy of atomisp_runtime_suspend() and
the same goes for the resume() functions.
Rename the runtime functions to atomisp_power_on()/_off() and use these
as runtime-pm handlers as well as helper in other places to remove
the code duplication.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Remove the unnecessary sw_contex.power_state checks:
1. atomisp_freq_scaling() and atomisp_stop_streaming() only run when the
ISP is powered up through runtime-pm, so the checks are not necessary
2. atomisp_mrfld_pre_power_down() and atomisp_runtime_resume() are only
called through the driver-core pm handling code which already
guarantees they are not called when already powered down / up.
3. atomisp_isr() also checks isp->css_initialized which only gets set
by atomisp_css_init() which runs *after* powering up the ISP and which
gets cleared by atomisp_css_uninit() *before* powering down the ISP.
So all the checks are unnecessary, remove them as well as the
sw_contex.power_state field itself.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_css_suspend() is a 1:1 copy of atomisp_css_uninit() and
atomisp_css_resume() is a 1:1 copy of atomisp_css_init().
Remove the 2 copies and have their one caller just call
atomisp_css_uninit() / atomisp_css_init() instead.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_css_uninit() only runs when all streams are stopped and
atomisp_css_stop() already clears the config, so the clearing
of the config can be dropped from atomisp_css_uninit().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_mrfld_power_down()/_up() are unnecessary wrappers around
atomisp_mrfld_power() remove them and just call atomisp_mrfld_power()
directly.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
atomisp_reset()
atomisp_reset() calls atomisp_mrfld_power_down() after calling
atomisp_runtime_suspend(), which already calls
atomisp_mrfld_power_down() itself.
And the some goes for atomisp_runtime_resume() / atomisp_mrfld_power_up().
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
After the conversion to videobuf2 userptr support is no longer needed,
drop it.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
After the conversion to videobuf2 a bunch of ia_css_frame_*()
functions are unused, remove them.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Remove atomisp_css_yuvpp_configure_viewfinder(), it is not used anywhere.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Remove ia_css_pipe_get_acc_stage_desc() and sh_css_flush(),
after removing the accelerator /dev/video# node and related ioctls
these are no longer used.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
streaming
atomisp_release() was taking pipe->vb_queue_mutex + isp->mutex at the
same time. But if the /dev/video# node is closed while still streaming
then vb2_queue_release() will call atomisp_stop_streaming() which takes
isp->mutex itself, leading to a deadlock.
To fix this only take isp->mutex after cleaning up the v4l2_fh /
the vb2_queue. While at it switch to vb2_fop_release() which will take
pipe->vb_queue_mutex for us, which also resolves a FIXME comment.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
I managed to trigger an atomisp_css_start() error by pushing my test
system towards an OOM situation, this resulted in the following errors:
atomisp-isp2 0000:00:03.0: alloc pages err...
atomisp-isp2 0000:00:03.0: hmm_bo_alloc_pages failed.
atomisp-isp2 0000:00:03.0: stream[0] start error.
But it is not entirely clear what the root cause of
the "alloc pages err..." error is. I suspect the root cause is
alloc_pages_bulk_array() failing. Add a log message to make
the root cause more clear if this is hit again.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
I managed to trigger an atomisp_css_start() error by pushing my test system
towards an OOM situation, this triggered the following WARN_ON() in
__vb2_queue_cancel() in videobuf2-core.c:
/*
* If you see this warning, then the driver isn't cleaning up properly
* after a failed start_streaming(). See the start_streaming()
* documentation in videobuf2-core.h for more information how buffers
* should be returned to vb2 in start_streaming().
*/
if (WARN_ON(atomic_read(&q->owned_by_drv_count))) {
Fix this by calling atomisp_flush_video_pipe() to return any queued buffers
back to the videobuf2-core on an atomisp_css_start() error.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
With the accel code gone this is unused, remove it.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The ATOMISP_ACC_* custom ioctls and the ACC device node have been removed
in commit a5c17adbadcb ("media: atomisp: Remove the ACC device node").
This means that pipe_configs[pipe_id].acc_extension now never gets set
which causes atomisp_compat_css20.c: __create_pipe() to always skip
creation of pipes with a pipe_id of IA_CSS_PIPE_ID_ACC / a mode of
IA_CSS_PIPE_MODE_ACC.
This allows removing of the acc_pipe creation / handling code
from mainly sh_css.c and a bunch of other places.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
has exp_id xx' log messages
Standard v4l2 userspace apps do not consume the s3a statistics block
data. Until we have a userspace consumer for this (libcamera), which
might also involve changing the API for this, lower the log level
of these messages to dev_dbg() to avoid them filling up the logs.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Depending on which order userspace makes various v4l2 calls, the sensor
might still be powered down when set_fmt is called.
What should really happen here is delay the writing of the mode-related
registers till streaming is started, but for now use the same quick fix
as the atomisp_ov2680 code and call power_up() from set_fmt() in
combination with keeping track of the power-state to avoid doing the
power-up sequence twice.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Remove the complicated __atomisp_get_pipe() helper, atomisp_buf_done()
only needs the pipe pointer in cases where it has a frame, so we can
simply get the pipe from the frame using the vb_to_pipe() helper.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Make atomisp_g_fmt_cap() default to YUV420 so that it matches with what
atomisp_try_fmt_cap() and atomisp_queue_setup() do when they need to
pick a default pixelformat.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The atomisp_try_fmt() call in atomisp_try_fmt_cap() replaces
the pixelformat passed by userspace with the sensors native pixelformat.
Which always gets replaced by V4L2_PIX_FMT_YUV420 by atomisp_adjust_fmt()
because raw sensor formats are not supported.
This needs to be fixed so that userspace which does a try_fmt call before
s_fmt does not end up always getting YUV420 even if it passed something
else into the try_fmt call.
To fix this restore the userspace requested pixelformat before
the atomisp_adjust_fmt() call. atomisp_adjust_fmt() will replace this
with V4L2_PIX_FMT_YUV420 in case an unsupported format is requested.
Note this relies on the "media: atomisp: Refactor atomisp_adjust_fmt()"
change, before that atomisp_adjust_fmt() would return -EINVAL for
unsupported pixelformats.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Refactor atomisp_adjust_fmt():
1. The block starting at "format_bridge = atomisp_get_format_bridge(...)"
and ending with "if (field == V4L2_FIELD_ANY) field = V4L2_FIELD_NONE;"
is duplicated. With only the second block:
a) Properly checking that format_bridge is not NULL; amd
b) Having the special handling for IA_CSS_FRAME_FORMAT_RAW
Remove the first block.
2. On a NULL return from atomisp_get_format_bridge(f->fmt.pix.pixelformat)
fall back to V4L2_PIX_FMT_YUV420 just like in the IA_CSS_FRAME_FORMAT_RAW
case. atomisp_adjust_fmt() is used in VIDIOC_TRY_FMT handling and that
should jusy pick a fmt rather then returning -EINVAL.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
called yet
camorama calls VIDIOC_REQBUFS(V4L2_MEMORY_MMAP) to test if MMAP support
works (this was added specifically because of the previously broken
MMAP support in atomisp).
Currently this fails because atomisp_get_css_frame_info() fails in this
case. Although it is weird to call VIDIOC_REQBUFS before VIDIOC_S_FMT,
it is allowed to do this.
Fix this not working by doing a S_FMT to V4L2_PIX_FMT_YUV420 + the highest
supported resolution.
Note this will cause camorama to use mmap mode, which means it will also
use libv4l2 to do format conversion. libv4l2 will pick V4L2_PIX_FMT_RGB565
as input format and this will lead to a garbled video display. This is
a libv4lconvert bug, the RGB565 -> RGB24 path in libv4lconvert assumes
that stride == width which is not true on the atomisp.
I've already send out a libv4lconvert fix for this. Also this can be worked
around by passing --dont-use-libv4l2 as argument to camorama.
Link: https://git.linuxtv.org/v4l-utils.git/commit/?id=aecfcfccfc2f78d7531456ffa5465666c6bc641e
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
To fix atomisp_queue_setup() sometimes failing it needs to be able to call
atomisp_set_fmt(), but atomisp_queue_setup() (VIDIOC_REQBUFS) does not get
passed a file handle by the videobuf2 core.
Partly revert commit b3be98f984d4 ("media: atomisp: Remove a couple of not
useful function wrappers") so that atomisp_set_fmt() can be used
without a file handle.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Convert atomisp to use videobuf2.
This fixes mmap not working and in general moving over to
the more modern videobuf2 is a good plan.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Several places rely on the [frame_]info member being the first member of
struct ia_css_frame, so that &frame->info will yield NULL when frame is
NULL (some places already explicitly check for a NULL frame pointer but
not nearly all).
For videobuf2 support the vb2_v4l2_buffer struct needs to be embedded
in the frame struct and it needs to be the first member. Breaking the
assumption that &frame->info will yield NULL when frame is NULL.
Add a ia_css_frame_get_info() helper to return either the ia_css_frame_info
struct embedded in the frame, or NULL when the frame pointer is NULL and
use this in places where a ia_css_frame_info ptr or NULL is expected.
To make sure that we catch all uses of the info field this patch also
renames the info field to frame_info.
This is a preparation patch for converting the driver to videobuf2.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use the new atomisp_flush_video_pipe() helper instead of open-coding it.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
