summaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)AuthorFilesLines
2023-04-12scsi: target: core: Fix invalid memory accessMaurizio Lombardi1-4/+3
nr_attrs should start counting from zero, otherwise we will end up dereferencing an invalid memory address. $ targetcli /loopback create general protection fault RIP: 0010:configfs_create_file+0x12/0x70 Call Trace: <TASK> configfs_attach_item.part.0+0x5f/0x150 configfs_attach_group.isra.0+0x49/0x120 configfs_mkdir+0x24f/0x4d0 vfs_mkdir+0x192/0x240 do_mkdirat+0x131/0x160 __x64_sys_mkdir+0x48/0x70 do_syscall_64+0x5c/0x90 Fixes: 31177b74790c ("scsi: target: core: Add RTPI attribute for target port") Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20230407130033.556644-1-mlombard@redhat.com Acked-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-03scsi: target: core: Remove unused 'prod_len' variableTom Rix1-5/+0
clang with W=1 reports: drivers/target/target_core_spc.c:229:6: error: variable 'prod_len' set but not used [-Werror,-Wunused-but-set-variable] u32 prod_len; ^ This variable is not used so remove it. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230329132421.1809362-1-trix@redhat.com Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-04-01Merge branch '6.3/scsi-fixes' into 6.4/scsi-stagingMartin K. Petersen1-5/+7
Pull in the fixes branch to resolve an mpi3mr conflict reported by sfr. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: target: tcm_loop: Remove redundant driver match functionLizhe1-7/+0
If there is no driver match function, the driver core assumes that each candidate pair (driver, device) matches. See driver_match_device(). pseudo_lld_bus_match() always returns 1 and is therefore equivalent to not registering a match function. Remove it. Signed-off-by: Lizhe <sensor1010@163.com> Link: https://lore.kernel.org/r/20230319043518.297490-1-sensor1010@163.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25Merge patch series "Constify most SCSI host templates"Martin K. Petersen1-1/+1
Bart Van Assche <bvanassche@acm.org> says: It helps humans and the compiler if it is made explicit that SCSI host templates are not modified. Hence this patch series that constifies most SCSI host templates. Please consider this patch series for the next merge window. Link: https://lore.kernel.org/r/20230322195515.1267197-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: target: tcm-loop: Declare SCSI host template constBart Van Assche1-1/+1
Make it explicit that the SCSI host template is not modified. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230322195515.1267197-79-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25Merge patch series "target: TMF and recovery fixes"Martin K. Petersen8-106/+204
Mike Christie <michael.christie@oracle.com> says: The following patches apply over Martin's 6.4 branches and Linus's tree. They fix a couple regressions in iscsit that occur when there are TMRs executing and a connection is closed. It also includes Dimitry's fixes in related code paths for cmd cleanup when ERL2 is used and the write pending hang during conn cleanup. This version of the patchset brings it back to just regressions and fixes for bugs we have a lot of users hitting. I'm going to fix isert and get it hooked into iscsit properly in a second patchset, because this one was getting so large. I've also moved my cleanup type of patches for a 3rd patchset. Link: https://lore.kernel.org/r/20230319015620.96006-1-michael.christie@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: target: iscsi: Handle abort for WRITE_PENDING cmdsDmitry Bogdanov1-0/+11
Sometimes an initiator does not send data for a WRITE command and tries to abort it. The abort hangs waiting for frontend driver completion. iSCSI driver waits for data and that timeout eventually initiates connection reinstatment. The connection closing releases the commands in the connection, but those aborted commands still did not handle the abort and did not decrease a command ref counter. Because of that the connection reinstatement hangs indefinitely and prevents re-login for that initiator. Add handling in TCM of the abort for the WRITE_PENDING commands at connection closing moment to make it possible to release them. Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> [mnc: Rebase and expand comment] Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230319015620.96006-10-michael.christie@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: target: iscsit: Fix TAS handling during conn cleanupMike Christie1-7/+9
Fix a bug added in commit f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race"). If CMD_T_TAS is set on the se_cmd we must call iscsit_free_cmd() to do the last put on the cmd and free it, because the connection is down and we will not up sending the response and doing the put from the normal I/O path. Add a check for CMD_T_TAS in iscsit_release_commands_from_conn() so we now detect this case and run iscsit_free_cmd(). Fixes: f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race") Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230319015620.96006-9-michael.christie@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: target: Fix multiple LUN_RESET handlingMike Christie2-3/+24
This fixes a bug where an initiator thinks a LUN_RESET has cleaned up running commands when it hasn't. The bug was added in commit 51ec502a3266 ("target: Delete tmr from list before processing"). The problem occurs when: 1. We have N I/O cmds running in the target layer spread over 2 sessions. 2. The initiator sends a LUN_RESET for each session. 3. session1's LUN_RESET loops over all the running commands from both sessions and moves them to its local drain_task_list. 4. session2's LUN_RESET does not see the LUN_RESET from session1 because the commit above has it remove itself. session2 also does not see any commands since the other reset moved them off the state lists. 5. sessions2's LUN_RESET will then complete with a successful response. 6. sessions2's inititor believes the running commands on its session are now cleaned up due to the successful response and cleans up the running commands from its side. It then restarts them. 7. The commands do eventually complete on the backend and the target starts to return aborted task statuses for them. The initiator will either throw a invalid ITT error or might accidentally lookup a new task if the ITT has been reallocated already. Fix the bug by reverting the patch, and serialize the execution of LUN_RESETs and Preempt and Aborts. Also prevent us from waiting on LUN_RESETs in core_tmr_drain_tmr_list, because it turns out the original patch fixed a bug that was not mentioned. For LUN_RESET1 core_tmr_drain_tmr_list can see a second LUN_RESET and wait on it. Then the second reset will run core_tmr_drain_tmr_list and see the first reset and wait on it resulting in a deadlock. Fixes: 51ec502a3266 ("target: Delete tmr from list before processing") Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230319015620.96006-8-michael.christie@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: target: iscsit: Free cmds before session freeDmitry Bogdanov1-3/+3
Commands from recovery entries are freed after session has been closed. That leads to use-after-free at command free or NPE with such call trace: Time2Retain timer expired for SID: 1, cleaning up iSCSI session. BUG: kernel NULL pointer dereference, address: 0000000000000140 RIP: 0010:sbitmap_queue_clear+0x3a/0xa0 Call Trace: target_release_cmd_kref+0xd1/0x1f0 [target_core_mod] transport_generic_free_cmd+0xd1/0x180 [target_core_mod] iscsit_free_cmd+0x53/0xd0 [iscsi_target_mod] iscsit_free_connection_recovery_entries+0x29d/0x320 [iscsi_target_mod] iscsit_close_session+0x13a/0x140 [iscsi_target_mod] iscsit_check_post_dataout+0x440/0x440 [iscsi_target_mod] call_timer_fn+0x24/0x140 Move cleanup of recovery enrties to before session freeing. Reported-by: Forza <forza@tnonline.net> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230319015620.96006-7-michael.christie@oracle.com Reviewed-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: target: iscsit: Stop/wait on cmds during conn closeMike Christie1-0/+10
This fixes a bug added in commit f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race"). If we have multiple sessions to the same se_device we can hit a race where a LUN_RESET on one session cleans up the se_cmds from under another session which is being closed. This results in the closing session freeing its conn/session structs while they are still in use. The bug is: 1. Session1 has IO se_cmd1. 2. Session2 can also have se_cmds for I/O and optionally TMRs for ABORTS but then gets a LUN_RESET. 3. The LUN_RESET on session2 sees the se_cmds on session1 and during the drain stages marks them all with CMD_T_ABORTED. 4. session1 is now closed so iscsit_release_commands_from_conn() only sees se_cmds with the CMD_T_ABORTED bit set and returns immediately even though we have outstanding commands. 5. session1's connection and session are freed. 6. The backend request for se_cmd1 completes and it accesses the freed connection/session. This hooks the iscsit layer into the cmd counter code, so we can wait for all outstanding se_cmds before freeing the connection. Fixes: f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race") Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230319015620.96006-6-michael.christie@oracle.com Reviewed-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: target: iscsit: isert: Alloc per conn cmd counterMike Christie3-15/+15
This has iscsit allocate a per conn cmd counter and converts iscsit/isert to use it instead of the per session one. Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230319015620.96006-5-michael.christie@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: target: Pass in cmd counter to use during cmd setupMike Christie3-23/+23
Allow target_get_sess_cmd() users to pass in the cmd counter they want to use. Right now we pass in the session's cmd counter but in a subsequent commit iSCSI will switch from per session to per conn. Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230319015620.96006-4-michael.christie@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: target: Move cmd counter allocationMike Christie4-42/+39
iSCSI needs to allocate its cmd counter per connection for MCS support where we need to stop and wait on commands running on a connection instead of per session. This moves the cmd counter allocation to target_setup_session() which is used by drivers that need the stop+wait behavior per session. xcopy doesn't need stop+wait at all, so we will be OK moving the cmd counter allocation outside of transport_init_session(). Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230319015620.96006-3-michael.christie@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-25scsi: target: Move sess cmd counter to new structMike Christie2-40/+97
iSCSI needs to wait on outstanding commands like how SRP and the FC/FCoE drivers do. It can't use target_stop_session() because for MCS support we can't stop the entire session during recovery because if other connections are OK then we want to be able to continue to execute I/O on them. Move the per session cmd counters to a new struct so iSCSI can allocate them per connection. The xcopy code can also just not allocate in the future since it doesn't need to track commands. Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230319015620.96006-2-michael.christie@oracle.com Reviewed-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-17Merge patch series "add virtual remote fabric"Martin K. Petersen12-126/+361
Dmitry Bogdanov <d.bogdanov@yadro.com> says: The patchset is based on 6.4/scsi-staging branch. The first 11 patches are just a refactoring to reduce code duplication in fabric drivers. They make several callouts be optional in fabric ops. Make a default implementation of the optional ops and remove such implementations in the fabric drivers. The last patch is a new virtual remote fabric driver. It has a valueble sence with patchset "scsi: target: make RTPI an TPG identifier" to configure RPTI on remote/tpgt_x same as on tpgt_y on other nodes in a storage cluster. That allows to report the same ports in RTPG from each node and to have a clusterwide tpg/acl/lun view in kernel. Link: https://lore.kernel.org/r/20230313181110.20566-1-d.bogdanov@yadro.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-17scsi: target: Add virtual remote targetDmitry Bogdanov6-0/+300
Create virtual remote target module. This can be used to see a whole ACL/LUN/TPG configuration from all nodes in storage cluster. For example, it permits setting up remote ports in ALUA port groups. To report all ports in a cluster in REPORT TARGET PORT GROUP command. Suggested-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20230313181110.20566-13-d.bogdanov@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-17scsi: target: fcoe: Remove default fabric ops calloutsDmitry Bogdanov3-21/+0
Remove callouts that are identical to the default implementations in TCM Core. Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20230313181110.20566-7-d.bogdanov@yadro.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-17scsi: target: sbp: Remove default fabric ops calloutsDmitry Bogdanov1-31/+0
Remove callouts that are identical to the default implementations in TCM Core. Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20230313181110.20566-6-d.bogdanov@yadro.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-17scsi: target: loop: Remove default fabric ops calloutsDmitry Bogdanov1-41/+0
Remove callouts that are identical to the default implementations in TCM Core. Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20230313181110.20566-5-d.bogdanov@yadro.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-17scsi: target: Add default fabric ops calloutsDmitry Bogdanov1-33/+61
There are several callouts in target fabric ops that most of fabric drivers fill with a function returning the same value. Stop requiring such callouts to exist in the ops, fill them in TCM Core. Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20230313181110.20566-2-d.bogdanov@yadro.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-10scsi: target: core: Add RTPI attribute for target portDmitry Bogdanov2-6/+52
RELATIVE TARGET PORT IDENTIFIER can be read and configured via configfs: $ echo 0x10 > $TARGET/tpgt_N/rtpi RTPI can be changed only on disabled target ports. Co-developed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20230301084512.21956-5-d.bogdanov@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-10scsi: target: core: Drop device-based RTPIRoman Bolshakov3-48/+0
The code is not needed since target port-based RTPI allocation replaced it. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20230301084512.21956-4-d.bogdanov@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-10scsi: target: core: Use RTPI from target portRoman Bolshakov5-11/+11
Replace all references to RTPI from LUN field to se_portal_group field. It introduces consistent reporting of RTPI for all LUNs and all target ports. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20230301084512.21956-3-d.bogdanov@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-10scsi: target: core: Add RTPI field to target portDmitry Bogdanov3-5/+60
SAM-5 4.6.5.2 (Relative Port Identifier attribute) defines the attribute as unique across SCSI target ports. The change introduces RTPI attribute to se_portal group. The value is unique across all enabled SCSI target ports. It also limits number of SCSI target ports to 65535. Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20230301084512.21956-2-d.bogdanov@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-07scsi: target: iscsi: Fix an error message in iscsi_check_key()Maurizio Lombardi1-5/+7
The first half of the error message is printed by pr_err(), the second half is printed by pr_debug(). The user will therefore see only the first part of the message and will miss some useful information. Link: https://lore.kernel.org/r/20230214141556.762047-1-mlombard@redhat.com Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-24Merge tag 'mm-stable-2023-02-20-13-37' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - Daniel Verkamp has contributed a memfd series ("mm/memfd: add F_SEAL_EXEC") which permits the setting of the memfd execute bit at memfd creation time, with the option of sealing the state of the X bit. - Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset() thread-safe for pmd unshare") which addresses a rare race condition related to PMD unsharing. - Several folioification patch serieses from Matthew Wilcox, Vishal Moola, Sidhartha Kumar and Lorenzo Stoakes - Johannes Weiner has a series ("mm: push down lock_page_memcg()") which does perform some memcg maintenance and cleanup work. - SeongJae Park has added DAMOS filtering to DAMON, with the series "mm/damon/core: implement damos filter". These filters provide users with finer-grained control over DAMOS's actions. SeongJae has also done some DAMON cleanup work. - Kairui Song adds a series ("Clean up and fixes for swap"). - Vernon Yang contributed the series "Clean up and refinement for maple tree". - Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It adds to MGLRU an LRU of memcgs, to improve the scalability of global reclaim. - David Hildenbrand has added some userfaultfd cleanup work in the series "mm: uffd-wp + change_protection() cleanups". - Christoph Hellwig has removed the generic_writepages() library function in the series "remove generic_writepages". - Baolin Wang has performed some maintenance on the compaction code in his series "Some small improvements for compaction". - Sidhartha Kumar is doing some maintenance work on struct page in his series "Get rid of tail page fields". - David Hildenbrand contributed some cleanup, bugfixing and generalization of pte management and of pte debugging in his series "mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with swap PTEs". - Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation flag in the series "Discard __GFP_ATOMIC". - Sergey Senozhatsky has improved zsmalloc's memory utilization with his series "zsmalloc: make zspage chain size configurable". - Joey Gouly has added prctl() support for prohibiting the creation of writeable+executable mappings. The previous BPF-based approach had shortcomings. See "mm: In-kernel support for memory-deny-write-execute (MDWE)". - Waiman Long did some kmemleak cleanup and bugfixing in the series "mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF". - T.J. Alumbaugh has contributed some MGLRU cleanup work in his series "mm: multi-gen LRU: improve". - Jiaqi Yan has provided some enhancements to our memory error statistics reporting, mainly by presenting the statistics on a per-node basis. See the series "Introduce per NUMA node memory error statistics". - Mel Gorman has a second and hopefully final shot at fixing a CPU-hog regression in compaction via his series "Fix excessive CPU usage during compaction". - Christoph Hellwig does some vmalloc maintenance work in the series "cleanup vfree and vunmap". - Christoph Hellwig has removed block_device_operations.rw_page() in ths series "remove ->rw_page". - We get some maple_tree improvements and cleanups in Liam Howlett's series "VMA tree type safety and remove __vma_adjust()". - Suren Baghdasaryan has done some work on the maintainability of our vm_flags handling in the series "introduce vm_flags modifier functions". - Some pagemap cleanup and generalization work in Mike Rapoport's series "mm, arch: add generic implementation of pfn_valid() for FLATMEM" and "fixups for generic implementation of pfn_valid()" - Baoquan He has done some work to make /proc/vmallocinfo and /proc/kcore better represent the real state of things in his series "mm/vmalloc.c: allow vread() to read out vm_map_ram areas". - Jason Gunthorpe rationalized the GUP system's interface to the rest of the kernel in the series "Simplify the external interface for GUP". - SeongJae Park wishes to migrate people from DAMON's debugfs interface over to its sysfs interface. To support this, we'll temporarily be printing warnings when people use the debugfs interface. See the series "mm/damon: deprecate DAMON debugfs interface". - Andrey Konovalov provided the accurately named "lib/stackdepot: fixes and clean-ups" series. - Huang Ying has provided a dramatic reduction in migration's TLB flush IPI rates with the series "migrate_pages(): batch TLB flushing". - Arnd Bergmann has some objtool fixups in "objtool warning fixes". * tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits) include/linux/migrate.h: remove unneeded externs mm/memory_hotplug: cleanup return value handing in do_migrate_range() mm/uffd: fix comment in handling pte markers mm: change to return bool for isolate_movable_page() mm: hugetlb: change to return bool for isolate_hugetlb() mm: change to return bool for isolate_lru_page() mm: change to return bool for folio_isolate_lru() objtool: add UACCESS exceptions for __tsan_volatile_read/write kmsan: disable ftrace in kmsan core code kasan: mark addr_has_metadata __always_inline mm: memcontrol: rename memcg_kmem_enabled() sh: initialize max_mapnr m68k/nommu: add missing definition of ARCH_PFN_OFFSET mm: percpu: fix incorrect size in pcpu_obj_full_size() maple_tree: reduce stack usage with gcc-9 and earlier mm: page_alloc: call panic() when memoryless node allocation fails mm: multi-gen LRU: avoid futile retries migrate_pages: move THP/hugetlb migration support check to simplify code migrate_pages: batch flushing TLB migrate_pages: share more code between _unmap and _move ...
2023-02-23Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-7/+5
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, libsas). The major core change is a rework to remove the two helpers around scsi_execute_cmd and use it as the only submission interface along with other minor fixes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (142 commits) scsi: ufs: core: Fix an error handling path in ufshcd_read_desc_param() scsi: ufs: core: Fix device management cmd timeout flow scsi: aic94xx: Add missing check for dma_map_single() scsi: smartpqi: Replace one-element array with flexible-array member scsi: mpt3sas: Fix a memory leak scsi: qla2xxx: Remove the unused variable wwn scsi: ufs: core: Fix kernel-doc syntax scsi: ufs: core: Add hibernation callbacks scsi: snic: Fix memory leak with using debugfs_lookup() scsi: ufs: core: Limit DMA alignment check scsi: Documentation: Correct spelling scsi: Documentation: Correct spelling scsi: target: Documentation: Correct spelling scsi: aacraid: Allocate cmd_priv with scsicmd scsi: ufs: qcom: dt-bindings: Add SM8550 compatible string scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW version major 5 scsi: ufs: qcom: fix platform_msi_domain_free_irqs() reference scsi: ufs: core: Enable DMA clustering scsi: ufs: exynos: Fix the maximum segment size scsi: ufs: exynos: Fix DMA alignment for PAGE_SIZE != 4096 ...
2023-02-22Merge tag 'net-next-6.3' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
2023-02-10mm: replace vma->vm_flags direct modifications with modifier callsSuren Baghdasaryan1-1/+1
Replace direct modifications to vma->vm_flags with calls to modifier functions to be able to track flag changes and to keep vma locking correctness. [akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo] Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjun Roy <arjunroy@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Lorenzo Stoakes <lstoakes@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Minchan Kim <minchan@google.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Peter Oskolkov <posk@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Punit Agrawal <punit.agrawal@bytedance.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Song Liu <songliubraving@fb.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-03target: use bvec_set_page to initialize bvecsChristoph Hellwig1-12/+6
Use the bvec_set_page helper to initialize bvecs. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20230203150634.3199647-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+2
Conflicts: drivers/net/ethernet/intel/ice/ice_main.c 418e53401e47 ("ice: move devlink port creation/deletion") 643ef23bd9dd ("ice: Introduce local var for readability") https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/ https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/ drivers/net/ethernet/engleder/tsnep_main.c 3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues") 25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock") https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/ net/netfilter/nf_conntrack_proto_sctp.c 13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"") a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths") f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets") https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/ https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-23net/sock: Introduce trace_sk_data_ready()Peilin Ye1-0/+2
As suggested by Cong, introduce a tracepoint for all ->sk_data_ready() callback implementations. For example: <...> iperf-609 [002] ..... 70.660425: sk_data_ready: family=2 protocol=6 func=sock_def_readable iperf-609 [002] ..... 70.660436: sk_data_ready: family=2 protocol=6 func=sock_def_readable <...> Suggested-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-14scsi: target: target_core_pscsi: Convert to scsi_execute_cmd()Mike Christie1-7/+5
scsi_execute_req() is going to be removed. Convert pscsi to scsi_execute_cmd(). Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-01-14scsi: target: core: Fix warning on RT kernelsMaurizio Lombardi1-2/+2
Calling spin_lock_irqsave() does not disable the interrupts on realtime kernels, remove the warning and replace assert_spin_locked() with lockdep_assert_held(). Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230110125310.55884-1-mlombard@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-12-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds10-86/+1053
Pull SCSI updates from James Bottomley: "Updates to the usual drivers (target, ufs, smartpqi, lpfc). There are some core changes, mostly around reworking some of our user context assumptions in device put and moving some code around. The remaining updates are bug fixes and minor changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (138 commits) scsi: sg: Fix get_user() in call sg_scsi_ioctl() scsi: megaraid_sas: Fix some spelling mistakes in comment scsi: core: Use SCSI_SCAN_INITIAL in do_scsi_scan_host() scsi: core: Use SCSI_SCAN_RESCAN in __scsi_add_device() scsi: ufs: ufs-mediatek: Remove unnecessary return code scsi: ufs: core: Fix the polling implementation scsi: libsas: Do not export sas_ata_wait_after_reset() scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset scsi: libsas: Add smp_ata_check_ready_type() scsi: Revert "scsi: hisi_sas: Don't send bcast events from HW during nexus HA reset" scsi: Revert "scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()" scsi: ufs: ufs-mediatek: Modify the return value scsi: ufs: ufs-mediatek: Remove unneeded code scsi: device_handler: alua: Call scsi_device_put() from non-atomic context scsi: device_handler: alua: Revert "Move a scsi_device_put() call out of alua_check_vpd()" scsi: snic: Fix possible UAF in snic_tgt_create() scsi: qla2xxx: Initialize vha->unknown_atio_[list, work] for NPIV hosts scsi: qla2xxx: Remove duplicate of vha->iocb_work initialization scsi: fcoe: Fix transport not deattached when fcoe_if_init() fails scsi: sd: Use 16-byte SYNCHRONIZE CACHE on ZBC devices ...
2022-11-25use less confusing names for iov_iter direction initializersAl Viro2-3/+3
READ/WRITE proved to be actively confusing - the meanings are "data destination, as used with read(2)" and "data source, as used with write(2)", but people keep interpreting those as "we read data from it" and "we write data to it", i.e. exactly the wrong way. Call them ITER_DEST and ITER_SOURCE - at least that is harder to misinterpret... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-11-25[target] fix iov_iter_bvec() "direction" argumentAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-11-24scsi: target: core: Fix hard lockup when executing a compare-and-write commandMaurizio Lombardi1-6/+16
While handling an I/O completion for the compare portion of a COMPARE_AND_WRITE command, it may happen that the compare_and_write_callback function submits new bio structs while still in softirq context. Low level drivers like md raid5 do not expect their make_request call to be used in softirq context, they call into schedule() and create a deadlocked system. __schedule at ffffffff873a0807 schedule at ffffffff873a0cc5 raid5_get_active_stripe at ffffffffc0875744 [raid456] raid5_make_request at ffffffffc0875a50 [raid456] md_handle_request at ffffffff8713b9f9 md_make_request at ffffffff8713bacb generic_make_request at ffffffff86e6f14b submit_bio at ffffffff86e6f27c iblock_submit_bios at ffffffffc0b4e4dc [target_core_iblock] iblock_execute_rw at ffffffffc0b4f3ce [target_core_iblock] __target_execute_cmd at ffffffffc1090079 [target_core_mod] compare_and_write_callback at ffffffffc1093602 [target_core_mod] target_cmd_interrupted at ffffffffc108d1ec [target_core_mod] target_complete_cmd_with_sense at ffffffffc108d27c [target_core_mod] iblock_complete_cmd at ffffffffc0b4e23a [target_core_iblock] dm_io_dec_pending at ffffffffc00db29e [dm_mod] clone_endio at ffffffffc00dbf07 [dm_mod] raid5_align_endio at ffffffffc086d6c2 [raid456] blk_update_request at ffffffff86e6d950 scsi_end_request at ffffffff87063d48 scsi_io_completion at ffffffff87063ee8 blk_complete_reqs at ffffffff86e77b05 __softirqentry_text_start at ffffffff876000d7 This problem appears to be an issue between target_cmd_interrupted() and compare_and_write_callback(). target_cmd_interrupted() calls the se_cmd's transport_complete_callback function pointer if the se_cmd is being stopped or aborted, and CMD_T_ABORTED was set on the se_cmd. When calling compare_and_write_callback(), the success parameter was set to false. target_cmd_interrupted() seems to expect this means the callback will do cleanup that does not require a process context. But compare_and_write_callback() ignores the parameter if there was I/O done for the compare part of COMPARE_AND_WRITE. Since there was data, the function continued on, passed the compare, and issued a write while ignoring the value of the success parameter. The submit of a bio for the write portion of the COMPARE_AND_WRITE then causes schedule to be unsafely called from the softirq context. Fix the bug in compare_and_write_callback by jumping to the out label if success == "false", after checking if we have been called by transport_generic_request_failure(); The command is being aborted or stopped so there is no need to submit the write bio for the write part of the COMPARE_AND_WRITE command. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20221121092703.316489-1-mlombard@redhat.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: target: iscsi: Fix a race condition between login_work and the login ↵Maurizio Lombardi1-2/+10
thread In case a malicious initiator sends some random data immediately after a login PDU; the iscsi_target_sk_data_ready() callback will schedule the login_work and, at the same time, the negotiation may end without clearing the LOGIN_FLAGS_INITIAL_PDU flag (because no additional PDU exchanges are required to complete the login). The login has been completed but the login_work function will find the LOGIN_FLAGS_INITIAL_PDU flag set and will never stop from rescheduling itself; at this point, if the initiator drops the connection, the iscsit_conn structure will be freed, login_work will dereference a released socket structure and the kernel crashes. BUG: kernel NULL pointer dereference, address: 0000000000000230 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod] RIP: 0010:_raw_read_lock_bh+0x15/0x30 Call trace: iscsi_target_do_login_rx+0x75/0x3f0 [iscsi_target_mod] process_one_work+0x1e8/0x3c0 Fix this bug by forcing login_work to stop after the login has been completed and the socket callbacks have been restored. Add a comment to clearify the return values of iscsi_target_do_login() Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20221115125638.102517-1-mlombard@redhat.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: target: core: Change the way target_xcopy_do_work() sets restiction on ↵Anastasia Kovaleva2-45/+54
max I/O To determine how many blocks sends in one command, the minimum value is selected from the hw_max_sectors of both devices. In target_xcopy_do_work, hw_max_sectors are used as blocks, not sectors; it also ignores the fact that sectors can be of different sizes, for example 512 and 4096 bytes. Because of this, a number of blocks can be transmitted that the device will not be able to accept. Change the selection of max transmission size into bytes. Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com> Link: https://lore.kernel.org/r/20221114102500.88892-4-a.kovaleva@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: target: core: Make hw_max_sectors store the sectors amount in blocksAnastasia Kovaleva1-1/+3
By default, hw_max_sectors stores its value in 512 blocks in iblock, despite the fact that the block size can be 4096 bytes. Change hw_max_sectors to store the number of sectors in hw_block_size blocks. Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com> Link: https://lore.kernel.org/r/20221114102500.88892-3-a.kovaleva@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: target: core: Send max transfer length in blocksAnastasia Kovaleva3-4/+5
A MAXIMUM TRANSFER LENGTH value indicates the maximum transfer length in logical blocks that the device server accepts for a single command. Fix function sending the length in sectors instead of blocks. This patch also removes the special casing for fileio in block_size_store since this logic in now unified in spc_emulate_evpd_b0() for all backends. Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com> Link: https://lore.kernel.org/r/20221114102500.88892-2-a.kovaleva@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: target: tcm_loop: Fix possible name leak in tcm_loop_setup_hba_bus()Yang Yingliang1-1/+2
If device_register() fails in tcm_loop_setup_hba_bus(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(). The 'tl_hba' will be freed in tcm_loop_release_adapter(), so it don't need goto error label in this case. Fixes: 3703b2c5d041 ("[SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221115015042.3652261-1-yangyingliang@huawei.com Reviewed-by: Mike Christie <michael.chritie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-08scsi: target: Use kstrtobool() instead of strtobool()Christophe JAILLET2-15/+17
strtobool() is the same as kstrtobool(). However, the latter is more used within the kernel. In order to remove strtobool() and slightly simplify kstrtox.h, switch to the other function name. While at it, include the corresponding header file (<linux/kstrtox.h>) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/fcddc0a53b4fc6e3c2e93592d3f61c5c63121855.1667336095.git.christophe.jaillet@wanadoo.fr Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-08scsi: target: core: Remove unused variable 'unit_serial_len'Colin Ian King1-6/+2
Variable 'unit_serial_len' is just being assigned and it's never used anywhere else. Remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20221101105326.31037-1-colin.i.king@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-27scsi: target: core: Dynamically set DPO and FUA in usage_bitsDmitry Bogdanov1-2/+32
libiscsi tests check the support of DPO & FUA bits in usage bits of RSOC response. This patch adds support for dynamic usage bits for each opcode. Set support of DPO & FUA bits in usage_bits of RSOC response depending on support DPOFUA in the backstore device. Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20220906103421.22348-7-d.bogdanov@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-27scsi: target: core: Check emulate_3pc for RECEIVE COPYDmitry Bogdanov1-0/+6
RECEIVE COPY RESULTS is an opcode from 3rd party copy command set and shall be rejected if emulate_3pc attribute is off like EXTENDED COPY. Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20220906103421.22348-6-d.bogdanov@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-10-27scsi: target: core: Add emulate_rsoc attributeDmitry Bogdanov3-0/+33
Allow support for RSOC to be turned off via the emulate_rsoc attibute. This is just for testing purposes. Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Link: https://lore.kernel.org/r/20220906103421.22348-5-d.bogdanov@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>