summaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)AuthorFilesLines
2016-05-26Merge branch 'next' of ↵Linus Torvalds24-670/+2243
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Introduce generic ADC thermal driver, based on OF thermal (Laxman Dewangan) - Introduce new thermal driver for Tango chips (Marc Gonzalez) - Rockchip driver support for RK3399, RK3366, and some fixes (Caesar Wang, Elaine Zhang and Shawn Lin) - Add CPU power cooling model to Mediatek thermal driver (Dawei Chien) - Wider usage of dev_thermal_zone_of_sensor_register (Eduardo Valentin) - TI thermal driver gained a new maintainer (Keerthy). - Enabled powerclamp driver by checking CPU feature and package cstate counter instead of CPU whitelist (Jacob Pan) - Various fixes on thermal governor, OF thermal, Tegra, and RCAR * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (50 commits) thermal: tango: initialize TEMPSI_CFG thermal: rockchip: use the usleep_range instead of udelay thermal: rockchip: add the notes for better reading thermal: rockchip: Support RK3366 SoCs in the thermal driver thermal: rockchip: handle the power sequence for tsadc controller thermal: rockchip: update the tsadc table for rk3399 thermal: rockchip: fixes the code_to_temp for tsadc driver thermal: rockchip: disable thermal->clk in err case thermal: tegra: add Tegra132 specific SOC_THERM driver thermal: fix ptr_ret.cocci warnings thermal: mediatek: Add cpu dynamic power cooling model. thermal: generic-adc: Add ADC based thermal sensor driver thermal: generic-adc: Add DT binding for ADC based thermal sensor thermal: tegra: fix static checker warning thermal: tegra: mark PM functions __maybe_unused thermal: add temperature sensor support for tango SoC thermal: hisilicon: fix IRQ imbalance enabling thermal: hisilicon: support to use any sensor thermal: rcar: Remove binding docs for r8a7794 thermal: tegra: add PM support ...
2016-05-18Merge branches 'thermal-core', 'thermal-intel' and 'thermal-soc' into nextZhang Rui23-669/+2236
2016-05-17thermal: tango: initialize TEMPSI_CFGMarc Gonzalez1-0/+1
TEMPSI_CFG is not equal to 0 at reset. It must be initialized. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: rockchip: use the usleep_range instead of udelayCaesar Wang1-2/+2
Documentation/timers/timers-howto.txt recommends to use usleep_range on delays > 10usec. The usleep_range indeed reduces CPU load, since the udelay will busy wait for enough loop cycles to achieve the desired delay. Fixes commit b06c52db39fd ("thermal: rockchip: handle the power sequence for tsadc controller"). Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Suggested-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: rockchip: add the notes for better readingCaesar Wang1-21/+53
To update the notes for keeping in mind that quickly in case someone re-read this driver in the future. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: rockchip: Support RK3366 SoCs in the thermal driverElaine Zhang1-0/+28
The RK3366 SoCs have two Temperature Sensors, channel 0 is for CPU channel 1 is for GPU. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: rockchip: handle the power sequence for tsadc controllerCaesar Wang1-5/+82
This adds the grf property to handle the tsadc power sequence on rockchip some SoCs. Verified on rk3399 can work with this patch on now. while true; do grep "" /sys/class/thermal/thermal_zone[0-1]/temp sleep .5; done /sys/class/thermal/thermal_zone0/temp:40555 /sys/class/thermal/thermal_zone1/temp:41111 /sys/class/thermal/thermal_zone0/temp:40555 /sys/class/thermal/thermal_zone1/temp:41111 /sys/class/thermal/thermal_zone0/temp:40555 /sys/class/thermal/thermal_zone1/temp:41666 /sys/class/thermal/thermal_zone0/temp:40555 /sys/class/thermal/thermal_zone1/temp:41111 /sys/class/thermal/thermal_zone0/temp:40555 /sys/class/thermal/thermal_zone1/temp:41111 /sys/class/thermal/thermal_zone0/temp:40555 Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: rockchip: update the tsadc table for rk3399Caesar Wang1-34/+34
This patch fixes the incorrect conversion table. The Code to Temperature mapping is updated based on sillcon results. Fixes commit b0d70338bca22cb14 ("thermal: rockchip: Support the RK3399 SoCs in thermal driver"). Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: rockchip: fixes the code_to_temp for tsadc driverCaesar Wang1-2/+2
We should judge the table.id[mid].code insearch algorithm on matter the adc value increment or decrement. Or otherwise, the temperature return the incorrect value in some cases. [ 1.438589] adc_val=402,temp=-40000 [ 1.438903] adc_val=403,temp=-39375 [ 1.439217] adc_val=404,temp=-38750 ... [ 1.441102] adc_val=410,temp=-40000 [ 1.441416] adc_val=411,temp=-34445 [ 1.441737] adc_val=412,temp=-33889 ... Let's fix it right now. Fixes commit 020ba95dbbbe ("thermal: rockchip: Add the sort mode for adc value increment or decrement"). Reported-by: Rocky Hao <rocky.hao@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: rockchip: disable thermal->clk in err caseShawn Lin1-1/+3
Disable thermal->clk when enabling pclk fails in resume routine. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: add Tegra132 specific SOC_THERM driverWei Ni4-0/+207
add Tegra132 specific SOC_THERM driver. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: fix ptr_ret.cocci warningskbuild test robot1-4/+1
drivers/thermal/tango_thermal.c:86:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci CC: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: generic-adc: Add ADC based thermal sensor driverLaxman Dewangan3-0/+193
In some of platform, thermal sensors like NCT thermistors are connected to the one of ADC channel. The temperature is read by reading the voltage across the sensor resistance via ADC. Lookup table for ADC read value to temperature is referred to get temperature. ADC is read via IIO framework. Add support for thermal sensor driver which read the voltage across sensor resistance from ADC through IIO framework. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: fix static checker warningWei Ni1-4/+1
There has a static checker warning: warn: variable dereferenced before check 'dev' (see line 222) Since check 'dev' is unnecessary, so remove this check. Fixes: ee6d79f202a4 ("thermal: tegra: add thermtrip function") Signed-off-by: Wei Ni <wni@nvidia.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: mark PM functions __maybe_unusedArnd Bergmann1-2/+2
After the PM support has been added to this driver, we get a harmless warning when that support is disabled at compile time: drivers/thermal/tegra/soctherm.c:641:12: error: 'soctherm_resume' defined but not used [-Werror=unused-function] static int soctherm_resume(struct device *dev) This marks the two PM functions as __maybe_unused to shut up the warning. This is preferred over adding an #ifdef around them, as it is harder to get wrong, and provides better compile-time coverage. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: a134b4143b65 ("thermal: tegra: add PM support") Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: add temperature sensor support for tango SoCMarc Gonzalez3-0/+121
The Tango thermal driver provides support for the primitive temperature sensor embedded in Tango chips since the SMP8758. This sensor only generates a 1-bit signal to indicate whether the die temperature exceeds a programmable threshold. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: hisilicon: fix IRQ imbalance enablingLeo Yan1-3/+4
When register sensors into thermal zone during initialization phase, it reports error for IRQ imbalance enabling: [ 2.040713] WARNING: at kernel/irq/manage.c:513 [ 2.040719] Modules linked in: [ 2.040721] [ 2.040729] CPU: 1 PID: 804 Comm: irq/33-hisi_the Not tainted 4.5.0-rc4+ #505 [ 2.040732] Hardware name: HiKey Development Board (DT) [ 2.040736] task: ffffffc03ae82580 ti: ffffffc0379c8000 task.ti: ffffffc0379c8000 [ 2.040745] PC is at __enable_irq+0x74/0x84 [ 2.040749] LR is at __enable_irq+0x74/0x84 This warning is for IRQ imbalance enabling, which is caused by enable_irq() twice. During sensor's initialization it tries to enable IRQ, the driver will call thermal_zone_of_sensor_register() to bind sensors and read sensor's temperature. But at this moment the flag "data->irq_enabled" has been not initialized as correct state, so it finally introduces the function enabled_irq() to be called twice. In essentially this is caused by the flag "data->irq_enabled" is inconsistent with real hardware IRQ enabling state. So this patch is to fix this issue, firstly init "irq_enabled" flag before binding sensors to thermal zone. Also change to use the function irq_get_irqchip_state() to read back real interrupt line state. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: hisilicon: support to use any sensorLeo Yan1-13/+20
In current code sensor driver registers all 4 sensors together and if any of them has not bound to thermal zone successfully then driver will return failure for driver's initialization. As a result, if DT binds thermal zone with only one sensor, then the thermal driver will not work well anymore. So this patch is to fix this issue. It allows the thermal sensor driver can register any number sensors at initialization phase, and fix up code for other related code to skip related sensor's accessing if the sensor has not been enabled in initialization phase. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: add PM supportWei Ni1-0/+46
Add suspend/resume function in soctherm driver. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: handle HW initialization in one funcotionWei Ni1-41/+44
Handle HW initialization in one function soctherm_init(), so that the codes are more clear. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: handle clocks in one functionWei Ni1-15/+36
Handle clock enable/disable codes in one function soctherm_clk_enable(), so that the codes are more clear. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: add thermtrip functionWei Ni4-5/+216
Add support for hardware critical thermal limits to the SOC_THERM driver. It use the Linux thermal framework to create critical trip temp, and set it to SOC_THERM hardware. If these limits are breached, the chip will reset, and if appropriately configured, will turn off the PMIC. This support is critical for safe usage of the chip. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: of-thermal: allow setting trip_temp on hardwareWei Ni1-0/+8
In current of-thermal, the .set_trip_temp only support to set trip_temp for SW. But some sensors support to set trip_temp on hardware, so that can trigger interrupt, shutdown or any other events. This patch adds .set_trip_temp() callback in thermal_zone_of_device_ops{}, so that the sensor device can use it to set trip_temp on hardware. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: add a debugfs to show registersWei Ni2-3/+145
Add a debugfs interface to show register contents for debug. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: add Tegra210 specific SOC_THERM driverWei Ni5-0/+195
Add Tegra210 specific SOC_THERM driver. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: split tegra_soctherm driverWei Ni7-566/+754
Split most of the Tegra124 data and code into a Tegra124-specific file. Split most of the fuse-related code into a fuse-related source file. This is in preparation for adding a Tegra210-specific driver in a future patch. Beyond the maintainability improvements, this is intended to separate chip-specific ATE and characterization-related hacks into chip-specific files, in the hopes that they won't pollute code for other chips. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: get rid of PDIV/HOTSPOT hackWei Ni1-4/+15
Get rid of T124-specific PDIV/HOTSPOT hack. tegra-soctherm.c contained a hack to set the SENSOR_PDIV and SENSOR_HOTSPOT_OFFSET registers - it just did two writes of T124-specific opaque values. Convert these into a form that can be substituted on a per-chip basis, and into structure fields that have at least some independent meaning. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: combine sensor group-related dataWei Ni1-27/+118
Combine sensor group-related data structures into struct tegra_tsensor_group. This provides a single location for sensor group data storage. More sensor group data will be added in subsequent patches. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: tegra: move tegra thermal files into tegra directoryWei Ni5-11/+17
Move Tegra soctherm driver to tegra directory, it's easy to maintain and add more new function support for Tegra platforms. This will also help to split soctherm driver into common parts and chip specific data related parts. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: convert ti-thermal to use devm_thermal_zone_of_sensor_registerEduardo Valentin1-4/+1
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: convert tegra_thermal to use devm_thermal_zone_of_sensor_registerEduardo Valentin1-22/+9
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: convert rockchip_thermal to use devm_thermal_zone_of_sensor_registerEduardo Valentin1-13/+4
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-pm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-kernel@vger.kernel.org Tested-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: convert rcar_thermal to use devm_thermal_zone_of_sensor_registerEduardo Valentin1-1/+1
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: convert qcom-spmi to use devm_thermal_zone_of_sensor_registerEduardo Valentin1-2/+1
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: convert mtk_thermal to use devm_thermal_zone_of_sensor_registerEduardo Valentin1-10/+2
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: convert hisi_thermal to use devm_thermal_zone_of_sensor_registerEduardo Valentin1-3/+2
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: of: fix cleanup when building a thermal zoneUlises Brindis1-1/+1
of_node_put is iterating through all terms in the tbps array even though the bind has failed. We need to only iterate through the terms that have already passed the binding step. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ulises Brindis <brindisu@lab126.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-05-17thermal: x86_pkg_temp: Handle the FROZEN hot plug notifier actions.Richard Cochran1-1/+1
When performing a suspend operation, the kernel brings all of the non-boot CPUs offline, calling the hot plug notifiers with the flag, CPU_TASKS_FROZEN, set in the action code. Similarly, during resume, the CPUs are brought back online, but again the notifiers have the FROZEN flag set. While some very few drivers really need to treat suspend/resume specially, this driver unintentionally ignores the notifications. This patch changes the driver to cancel its work item when the CPU goes down, even during a suspend operation. As a result, the suspended state is no longer a special case. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Signed-off-by: Richard Cochran <rcochran@linutronix.de> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-16thermal: check validity get_trip_hyst function pointer in bang-bang governorMichele Di Giorgio1-1/+7
Bang-bang thermal governor uses trip point hysteresis to make decisions. Hysteresis is a required property in the device tree for trip points, but it is an optional thermal zone device operation. Hence, we need to check whether the function pointer is valid or not. If it is not available, we assume the hysteresis to be zero. Consequently, a highly varying temperature will make the governor continuosly switch a cooling device ON and OFF. CC: Zhang Rui <rui.zhang@intel.com> CC: Eduardo Valentin <edubezval@gmail.com> CC: Peter Feuerer <peter@piie.net> Signed-off-by: Michele Di Giorgio <michele.digiorgio@arm.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-11Thermal / ACPI / video: add INT3406 thermal driverAaron Lu4-25/+282
INT3406 ACPI device object resembles an ACPI video output device, but its _BCM is said to be deprecated and should not be used. So we will make use of the raw interface to do the actual cooling. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-07thermal: int340x: processor_thermal: support acpi notificationSrinivas Pandruvada1-31/+77
BIOS/EC can change PPCC element dynamically and inform OS about the change. When this driver receives notification, it will read PPCC element again. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-07thermal/powerclamp: remove cpu whitelistJacob Pan1-38/+9
Powerclamp works by aligning idle time to achieve package level idle states, aka cstates. As long as one of the package cstates is available, synchronized idle injection is meaningful. This patch replaces the CPU whitelist with CPU feature and package cstate counter check such that we don't have to modify this whitelist for every new CPU. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-04-28thermal: use %d to print S32 parametersLeo Yan1-1/+1
Power allocator's parameters are S32 type, so use %d to print them. Acked-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-28thermal: hisilicon: increase temperature resolutionLeo Yan1-2/+2
When calculate temperature, old code firstly do division and then convert to "millicelsius" unit. This will lose resolution and only can read back temperature with "Celsius" unit. So firstly scale step value to "millicelsius" and then do division, so finally we can increase resolution for temperature value. Also refine the calculation from temperature value to step value. Signed-off-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-21thermal: fix Mediatek thermal controller buildJohannes Berg1-0/+1
At least with CONFIG_COMPILE_TEST, there's no reason to assume that CONFIG_RESET_CONTROLLER is set, but the code for this controller requires it since it calls device_reset(). Make CONFIG_MTK_THERMAL properly depend on CONFIG_RESET_CONTROLLER. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-21thermal: consistently use int for trip tempWei Ni1-4/+4
The commit 17e8351a7739 consistently use int for temperature, however it missed a few in trip temperature and thermal_core. In current codes, the trip->temperature used "unsigned long" and zone->temperature used"int", if the temperature is negative value, it will get wrong result when compare temperature with trip temperature. This patch can fix it. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-21thermal: fix mtk_thermal build dependencyRandy Dunlap1-0/+1
Fix build errors when MTK_THERMAL=y and NVMEM=m by preventing that Kconfig combination. drivers/built-in.o: In function `mtk_thermal_probe': mtk_thermal.c:(.text+0xffa8f): undefined reference to `nvmem_cell_get' mtk_thermal.c:(.text+0xffabe): undefined reference to `nvmem_cell_read' mtk_thermal.c:(.text+0xffac9): undefined reference to `nvmem_cell_put' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: <linux-pm@vger.kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Hanyi Wu <hanyi.wu@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-21thermal: minor mtk_thermal.c cleanupsRandy Dunlap1-2/+1
Trivial cleanups: - delete one duplicate #include - end email address with closing '>' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Hanyi Wu <hanyi.wu@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-21thermal: power_allocator: req_range multiplication should be a 64 bit typeJavi Merino1-1/+1
req_range is declared as a u64 to cope with overflows in the multiplication of two u32. As both req_power and power_range are u32, we need to make sure the multiplication is done with u64 types. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-21thermal: of: add __init attributeJulia Lawall1-2/+2
Add __init attribute on a function that is only called from other __init functions and that is not inlined, at least with gcc version 4.8.4 on an x86 machine with allyesconfig. Currently, the function is put in the .text.unlikely segment. Declaring it as __init will cause it to be put in the .init.text and to disappear after initialization. The result of objdump -x on the function before the change is as follows: 0000000000000086 l F .text.unlikely 0000000000000739 thermal_of_build_thermal_zone And after the change it is as follows: 0000000000000000 l F .init.text 0000000000000734 thermal_of_build_thermal_zone Done with the help of Coccinelle. The semantic patch checks for local static non-init functions that are called from an __init function and are not called from any other function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>