summaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)AuthorFilesLines
2016-02-11thermal: cpu_cooling: fix out of bounds access in time_in_idleJavi Merino1-6/+8
In __cpufreq_cooling_register() we allocate the arrays for time_in_idle and time_in_idle_timestamp to be as big as the number of cpus in this cpufreq device. However, in get_load() we access this array using the cpu number as index, which can result in an out of bound access. Index time_in_idle{,_timestamp} using the index in the cpufreq_device's allowed_cpus mask, as we do for the load_cpu array in cpufreq_get_requested_power() Reported-by: Nicolas Boichat <drinkcat@chromium.org> Cc: Amit Daniel Kachhap <amit.kachhap@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Tested-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-10thermal: allow u8500-thermal driver to be a moduleArnd Bergmann1-2/+2
When the thermal subsystem is a loadable module, the u8500 driver fails to build: drivers/thermal/built-in.o: In function `db8500_thermal_probe': db8500_thermal.c:(.text+0x96c): undefined reference to `thermal_zone_device_register' drivers/thermal/built-in.o: In function `db8500_thermal_work': db8500_thermal.c:(.text+0xab4): undefined reference to `thermal_zone_device_update' This changes the symbol to a tristate, so Kconfig can track the dependency correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-10thermal: allow spear-thermal driver to be a moduleArnd Bergmann1-1/+1
When the thermal subsystem is a loadable module, the spear driver fails to build: drivers/thermal/built-in.o: In function `spear_thermal_exit': spear_thermal.c:(.text+0xf8): undefined reference to `thermal_zone_device_unregister' drivers/thermal/built-in.o: In function `spear_thermal_probe': spear_thermal.c:(.text+0x230): undefined reference to `thermal_zone_device_register' This changes the symbol to a tristate, so Kconfig can track the dependency correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-10thermal: spear: use __maybe_unused for PM functionsArnd Bergmann1-4/+2
The spear thermal driver hides its suspend/resume function conditionally based on CONFIG_PM, but references them based on CONFIG_PM_SLEEP, so we get a warning if the former is set but the latter is not: thermal/spear_thermal.c:58:12: warning: 'spear_thermal_suspend' defined but not used [-Wunused-function] thermal/spear_thermal.c:75:12: warning: 'spear_thermal_resume' defined but not used [-Wunused-function] This removes the #ifdef and instead uses a __maybe_uninitialized annotation to avoid the warning and improve compile-time coverage. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-10thermal: rcar: enable to use thermal-zone on DTKuninori Morimoto1-5/+40
This patch enables to use thermal-zone on DT if it was calles as "renesas,rcar-thermal-gen2". Previous style (= non thermal-zone) is still supported by "renesas,rcar-thermal" to keep compatibility for "git bisect". Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-02-10thermal: of: use for_each_available_child_of_node for child iteratorLaxman Dewangan1-15/+3
Use for_each_available_child_of_node() for iterating over each available child instead of iterating over each child and then checking their status. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-24Merge branch 'next' of ↵Linus Torvalds7-39/+297
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "The top merge commit was re-generated yesterday because two topic branches were dropped from this pull request in the last minute due to some unaddressed comments. All the other material has been in linux-next for quite a while. Specifics: - Enhance thermal core to handle unexpected device cooling states after fresh boot and system resume. From Zhang Rui and Chen Yu. - Several fixes and cleanups on Rockchip and RCAR thermal drivers. From Caesar Wang and Kuninori Morimoto. - Add Broxton support for Intel processor thermal reporting device driver. From Amy Wiles" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: trip_point_temp_store() calls thermal_zone_device_update() thermal: rcar: rcar_thermal_get_temp() return error if strange temp thermal: rcar: check irq possibility in rcar_thermal_irq_xxx() thermal: rcar: check every rcar_thermal_update_temp() return value thermal: rcar: move rcar_thermal_dt_ids to upside thermal: rockchip: Support the RK3399 SoCs in thermal driver thermal: rockchip: Support the RK3228 SoCs in thermal driver dt-bindings: rockchip-thermal: Support the RK3228/RK3399 SoCs compatible thermal: rockchip: fix a trivial typo Thermal: Enable Broxton SoC thermal reporting device thermal: constify pch_dev_ops structure Thermal: do thermal zone update after a cooling device registered Thermal: handle thermal zone device properly during system sleep Thermal: initialize thermal zone device correctly
2016-01-23Merge branches 'thermal-intel', 'thermal-suspend-fix' and 'thermal-soc' into ↵Zhang Rui5-38/+286
next
2016-01-07thermal: trip_point_temp_store() calls thermal_zone_device_update()Kuninori Morimoto1-1/+5
trip_point_temp_store() updates trip temperature. It should call thermal_zone_device_update() immediately. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-07thermal: rcar: rcar_thermal_get_temp() return error if strange tempKuninori Morimoto1-1/+11
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-07thermal: rcar: check irq possibility in rcar_thermal_irq_xxx()Kuninori Morimoto1-4/+5
Current rcar thermal driver sometimes checks irq possibility when it calls rcar_thermal_irq_enable/disable(), but sometimes not. This patch checks it inside rcar_thermal_irq_enable/disable(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-07thermal: rcar: check every rcar_thermal_update_temp() return valueKuninori Morimoto1-10/+12
Every rcar_thermal_update_temp() return value will be checked. And also, rcar_thermal_get_temp() always call rcar_thermal_update_temp() by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-07thermal: rcar: move rcar_thermal_dt_ids to upsideKuninori Morimoto1-6/+6
This patch is prepare for of-thermal support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-07thermal: rockchip: Support the RK3399 SoCs in thermal driverCaesar Wang1-0/+66
The RK3399 SoCs have two Temperature Sensors, channel 0 is for CPU. channel 1 is for GPU. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-07thermal: rockchip: Support the RK3228 SoCs in thermal driverCaesar Wang1-0/+81
The RK3228 SoCs has one Temperature Sensor, channel 0 is for CPU. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-01-07thermal: rockchip: fix a trivial typoCaesar Wang1-12/+13
This patchset trys to dictate unified format for driver. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-12-29Thermal: Enable Broxton SoC thermal reporting deviceAmy Wiles1-0/+10
Signed-off-by: Amy Wiles <amy.l.wiles@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-12-29thermal: constify pch_dev_ops structureJulia Lawall1-1/+1
The pch_dev_ops structure is never modified. It is only stored in a field that is already declared as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-12-29Thermal: do thermal zone update after a cooling device registeredChen Yu1-1/+13
When a new cooling device is registered, we need to update the thermal zone to set the new registered cooling device to a proper state. This fixes a problem that the system is cool, while the fan devices are left running on full speed after boot, if fan device is registered after thermal zone device. Here is the history of why current patch looks like this: https://patchwork.kernel.org/patch/7273041/ CC: <stable@vger.kernel.org> #3.18+ Reference:https://bugzilla.kernel.org/show_bug.cgi?id=92431 Tested-by: Manuel Krause <manuelkrause@netscape.net> Tested-by: szegad <szegadlo@poczta.onet.pl> Tested-by: prash <prash.n.rao@gmail.com> Tested-by: amish <ammdispose-arch@yahoo.com> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com>
2015-12-29Thermal: handle thermal zone device properly during system sleepZhang Rui1-0/+42
Current thermal code does not handle system sleep well because 1. the cooling device cooling state may be changed during suspend 2. the previous temperature reading becomes invalid after resumed because it is got before system sleep 3. updating thermal zone device during suspending/resuming is wrong because some devices may have already been suspended or may have not been resumed. Thus, the proper way to do this is to cancel all thermal zone device update requirements during suspend/resume, and after all the devices have been resumed, reset and update every registered thermal zone devices. This also fixes a regression introduced by: Commit 19593a1fb1f6 ("ACPI / fan: convert to platform driver") Because, with above commit applied, all the fan devices are attached to the acpi_general_pm_domain, and they are turned on by the pm_domain automatically after resume, without the awareness of thermal core. CC: <stable@vger.kernel.org> #3.18+ Reference: https://bugzilla.kernel.org/show_bug.cgi?id=78201 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=91411 Tested-by: Manuel Krause <manuelkrause@netscape.net> Tested-by: szegad <szegadlo@poczta.onet.pl> Tested-by: prash <prash.n.rao@gmail.com> Tested-by: amish <ammdispose-arch@yahoo.com> Tested-by: Matthias <morpheusxyz123@yahoo.de> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com>
2015-12-29Thermal: initialize thermal zone device correctlyZhang Rui3-4/+33
After thermal zone device registered, as we have not read any temperature before, thus tz->temperature should not be 0, which actually means 0C, and thermal trend is not available. In this case, we need specially handling for the first thermal_zone_device_update(). Both thermal core framework and step_wise governor is enhanced to handle this. And since the step_wise governor is the only one that uses trends, so it's the only thermal governor that needs to be updated. CC: <stable@vger.kernel.org> #3.18+ Tested-by: Manuel Krause <manuelkrause@netscape.net> Tested-by: szegad <szegadlo@poczta.onet.pl> Tested-by: prash <prash.n.rao@gmail.com> Tested-by: amish <ammdispose-arch@yahoo.com> Tested-by: Matthias <morpheusxyz123@yahoo.de> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com>
2015-12-09x86/platform/iosf_mbi: Remove duplicate definitionsAndy Shevchenko2-53/+51
The read and write opcodes are global for all units on SoC and even across Intel SoCs. Remove duplication of corresponding constants. At the same time convert all current users. No functional change. Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Boon Leong Ong <boon.leong.ong@intel.com> Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-24imx: thermal: use CPU temperature grade info for thresholdsTim Harvey1-15/+41
The IMX6Q/IMX6DL SoC's have a 2-bit temperature grade stored in OTP which is valid for all IMX6 SoC's (despite the fact that the IMXSDLRM and IMXSXRM do not document this - this has been proven via tests as well as verified by Freescale FAE). Instead of assuming a fixed 85C for passive cooling threshold and 105C for critical use the thermal grade for these configurations. We will set the critical to maxT - 5C and passive to maxT - 10C. Cc: Anson Huang <b20788@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Jon Nettleton <jon@solid-run.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> ---- v3: - rebase against linux-soc-thermal.git - added ack's from Shawn and Jon v2: - remove check for IMX6Q and update comments: The OTP values have been tested on IMX6SOLO, IMX6DUALLITE, and IMX6SX and Freescale FAE has shared data with me that the OTP settings are the same and that the reference manuals will reflect this in their next updates. - set critical to max - 5C - set passive to max - 10C - display max temp in info - do not allow passive to be set above critical Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-24Revert "thermal: qcom_spmi: allow compile test"Arnd Bergmann1-1/+1
This just caused build errors: warning: (QCOM_SPMI_TEMP_ALARM) selects REGMAP_SPMI which has unmet direct dependencies (SPMI) drivers/built-in.o: In function `regmap_spmi_ext_gather_write': :(.text+0x609b0): undefined reference to `spmi_ext_register_write' :(.text+0x609f0): undefined reference to `spmi_ext_register_writel' While it's generally a good idea to allow compile testing, in this case, it just doesn't work, so reverting the patch that introduced the compile-test variant seems the most appropriate solution. Note that SPMI also has a 'depends on ARCH_QCOM || COMPILE_TEST' statement, so we should be able to enable SPMI on all architectures for compile testing already. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cb7fb4d34202 ("thermal: qcom_spmi: allow compile test") Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-16thermal: rcar_thermal: remove redundant operationKuninori Morimoto1-28/+21
Probe error operation and remove operation are same. Let's use same function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-16thermal: of-thermal: Reduce log level for message when can't fine thermal zoneJiada Wang1-1/+1
Some systems register thermal zone by themself and don't need to have thermal zones node in DT. Therefore reduce the log level from ERROR to DEBUG when thermal zone node can't be find in of_thermal_destroy_zones(). Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: power_allocator: Use temperature reading from tzKapileshwar Singh1-17/+7
All thermal governors use the temperature value stored in struct thermal_zone_device. thermal_zone_device->temperature power_allocator governor should not deviate from this and use the same. Cc: Javi Merino <javi.merino@arm.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Kurtz <djkurtz@chromium.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Javi Merino <javi.merino@arm.com> Reported-by: Sugumar Natarajan <sugumar.natarajan@arm.com> Signed-off-by: Kapileshwar Singh <kapileshwar.singh@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: Support the RK3368 SoCs in thermal driverCaesar Wang1-0/+72
The RK3368 SoCs support to 2 channel TS-ADC, the temperature criteria of each channel can be configurable. The system has two Temperature Sensors, channel 0 is for CPU, and channel 1 is for GPU. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: consistently use int for temperaturesCaesar Wang1-8/+8
As Temperature is currently represented as int not long in the thermal framework since use int intead of unsigned long/long to represent temperature to avoid bogus overheat detection when negative temperature reported. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: Add the sort mode for adc value increment or decrementCaesar Wang1-15/+53
The conversion table has the adc value and temperature. In fact, the adc value only has the increment or decrement mode in conversion table. Moment, we can add the sort mode to be better support the *code_to_temp* for differenr SoCs. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: improve the conversion functionCaesar Wang1-27/+55
We should make the conversion table in as a parameter since the different SoCs have the different conversionion table. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: trivial: fix typo in commitCaesar Wang1-9/+13
Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: better to compatible the driver for different SoCsCaesar Wang1-38/+48
The current driver is default to register the two thermal sensors in probe since some SoCs maybe only have one sensor for thermal. In some cases, the channel 0 is not always the cpu or gpu sensor. So add the channel can be configured for sensors. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-12thermal: rockchip: fix compile errorCaesar Wang1-0/+1
Missing a include file caused compile error. drivers/thermal/rockchip_thermal.c: In function 'rockchip_thermal_suspend': drivers/thermal/rockchip_thermal.c:720:2: error: implicit declaration of function 'pinctrl_pm_select_sleep_state' [-Werror=implicit-function-declaration] ... Fixes: 7e38a5b1daa1 ("thermal: rockchip: support the sleep pinctrl state to avoid glitches") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-11Merge branch 'next' of ↵Linus Torvalds13-68/+887
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal updates from Zhang Rui: - Implement generic devfreq cooling mechanism through frequency reduction for devices using devfreq. From Ørjan Eide and Javi Merino. - Introduce OMAP3 support on TI SoC thermal driver. From Pavel Mack and Eduardo Valentin. - A bounch of small fixes on devfreq_cooling, Exynos, IMX, Armada, and Rockchip thermal drivers. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (24 commits) thermal: exynos: Directly return 0 instead of using local ret variable thermal: exynos: Remove unneeded semicolon thermal: exynos: Use IS_ERR() because regulator cannot be NULL thermal: exynos: Fix first temperature read after registering sensor thermal: exynos: Fix unbalanced regulator disable on probe failure devfreq_cooling: return on allocation failure thermal: rockchip: support the sleep pinctrl state to avoid glitches in s2r dt-bindings: rockchip-thermal: Add the pinctrl states in this document thermal: devfreq_cooling: Make power a u64 thermal: devfreq_cooling: use a thermal_cooling_device for register and unregister thermal: underflow bug in imx_set_trip_temp() thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formula thermal: imx: register irq handler later in probe thermal: rockhip: fix setting thermal shutdown polarity thermal: rockchip: fix handling of invalid readings devfreq_cooling: add trace information thermal: Add devfreq cooling PM / OPP: get the voltage for all OPPs tools/thermal: tmon: use pkg-config also for CFLAGS linux/thermal.h: rename KELVIN_TO_CELSIUS to DECI_KELVIN_TO_CELSIUS ...
2015-11-10remove abs64()Andrew Morton1-1/+1
Switch everything to the new and more capable implementation of abs(). Mainly to give the new abs() a bit of a workout. Cc: Michal Nazarewicz <mina86@mina86.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06Merge branches 'thermal-core', 'thermal-intel' and 'thermal-soc' into nextZhang Rui12-63/+884
2015-11-06Merge branch 'linus' of ↵Zhang Rui3-38/+54
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
2015-11-04thermal: exynos: Directly return 0 instead of using local ret variableKrzysztof Kozlowski1-2/+3
The 'ret' variable in exynos5440_tmu_initialize() is initialized to 0 and returned as is. Replace it with direct return statement. This also fixes coccinelle warning: drivers/thermal/samsung/exynos_tmu.c:611:5-8: Unneeded variable: "ret". Return "0" on line 654 Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-04thermal: exynos: Remove unneeded semicolonKrzysztof Kozlowski1-2/+2
Remove semicolons after switch statement. Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-04thermal: exynos: Use IS_ERR() because regulator cannot be NULLKrzysztof Kozlowski1-1/+1
The NULL check in probe's error path is not needed because in that time the regulator cannot be NULL (regulator_get() returns valid pointer or ERR_PTR). Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-04thermal: exynos: Fix first temperature read after registering sensorKrzysztof Kozlowski1-10/+17
Thermal core could not read the temperature after registering the thermal sensor with thermal_zone_of_sensor_register() because the driver was not yet initialized. The call trace looked like: exynos_tmu_probe() thermal_zone_of_sensor_register() of_thermal_set_mode() thermal_zone_device_update() exynos_get_temp() if (!data->tmu_read) return -EINVAL; exynos_map_dt_data() data->tmu_read = ... This produced an error in dmesg: thermal thermal_zone0: failed to read out thermal zone (-22) Register the thermal_zone_device later, after parsing Device Tree and enabling necessary clocks, but before calling exynos_tmu_initialize() which uses the registered thermal_zone_device. Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 3b6a1a805f34 ("thermal: samsung: core: Exynos TMU rework to use device tree for configuration") Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-04thermal: exynos: Fix unbalanced regulator disable on probe failureKrzysztof Kozlowski1-17/+17
During probe if the regulator could not be enabled, the error exit path would still disable it. This could lead to unbalanced counter of regulator enable/disable. The patch moves code for getting and enabling the regulator from exynos_map_dt_data() to probe function because it is really not a part of getting Device Tree properties. Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 5f09a5cbd14a ("thermal: exynos: Disable the regulator on probe failure") Cc: <stable@vger.kernel.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-04devfreq_cooling: return on allocation failureDan Carpenter1-1/+1
If the allocation fails then we can't continue. Fixes: a76caf55e5b3 ('thermal: Add devfreq cooling') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-03thermal: rockchip: support the sleep pinctrl state to avoid glitches in s2rCaesar Wang1-0/+4
When we come out of system suspend state (S3) the tsadc will have been reset and back at its default state. While reprogramming the tsadc it's possible that we'll glitch the output and unintentionally cause the "over temperature" GPIO to be asserted. Since the over temperature GPIO is often hooked up to something that will cause a reboot or shutdown in hardware, this glitch can be catastrophic on some boards. We'll add support for selecting the "sleep" pinctrl state at suspend time. Boards can use this to effectively disable the tsadc at suspend time and avoid glitches when the system is resumed. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-03Merge branch 'linus' of ↵Zhang Rui11-33/+835
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
2015-11-03thermal: devfreq_cooling: Make power a u64Javi Merino1-1/+1
The prototype of do_div() is: uint32_t do_div(uint64_t *n, uint32_t base); Make power u64 to avoid the following warning: drivers/thermal/devfreq_cooling.c: In function 'get_dynamic_power': drivers/thermal/devfreq_cooling.c:267:2: warning: comparison of distinct pointer types lacks a cast [enabled by default] drivers/thermal/devfreq_cooling.c:267:2: warning: right shift count >= width of type [enabled by default] drivers/thermal/devfreq_cooling.c:267:2: warning: passing argument 1 of '__div64_32' from incompatible pointer type [enabled by default] include/asm-generic/div64.h:35:17: note: expected 'uint64_t *' but argument is of type 'long unsigned int *' Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-11-03thermal: devfreq_cooling: use a thermal_cooling_device for register and ↵Javi Merino1-6/+10
unregister Be consistent with what other cooling devices do and return a struct thermal_cooling_device * on register. Also, for the unregister, accept a struct thermal_cooling_device * as parameter. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-10-30thermal: underflow bug in imx_set_trip_temp()Dan Carpenter1-1/+1
We recently changed this from unsigned long to int so it introduced an underflow bug. Fixes: 17e8351a7739 ('thermal: consistently use int for temperatures') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-10-30thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formulaNadav Haklai1-3/+3
Update the coefficients so the calculation will not overrun the unsigned long 32bits boundary Signed-off-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Victor Axelrod <victora@marvell.com> Reviewed-by: Neta Zur Hershkovits <neta@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>