summaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)AuthorFilesLines
2021-09-11Merge tag 'thermal-v5.15-rc1' of ↵Linus Torvalds13-13/+1054
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add the tegra3 thermal sensor and fix the compilation testing on tegra by adding a dependency on ARCH_TEGRA along with COMPILE_TEST (Dmitry Osipenko) - Fix the error code for the exynos when devm_get_clk() fails (Dan Carpenter) - Add the TCC cooling support for AlderLake platform (Sumeet Pawnikar) - Add support for hardware trip points for the rcar gen3 thermal driver and store TSC id as unsigned int (Niklas Söderlund) - Replace the deprecated CPU-hotplug functions get_online_cpus() and put_online_cpus (Sebastian Andrzej Siewior) - Add the thermal tools directory in the MAINTAINERS file (Daniel Lezcano) - Fix the Makefile and the cross compilation flags for the userspace 'tmon' tool (Rolf Eike Beer) - Allow to use the IMOK independently from the GDDV on Int340x (Sumeet Pawnikar) - Fix the stub thermal_cooling_device_register() function prototype which does not match the real function (Arnd Bergmann) - Make the thermal trip point optional in the DT bindings (Maxime Ripard) - Fix a typo in a comment in the core code (Geert Uytterhoeven) - Reduce the verbosity of the trace in the SoC thermal tegra driver (Dmitry Osipenko) - Add the support for the LMh (Limit Management hardware) driver on the QCom platforms (Thara Gopinath) - Allow processing of HWP interrupt by adding a weak function in the Intel driver (Srinivas Pandruvada) - Prevent an abort of the sensor probe is a channel is not used (Matthias Kaehlcke) * tag 'thermal-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used thermal/drivers/intel: Allow processing of HWP interrupt dt-bindings: thermal: Add dt binding for QCOM LMh thermal/drivers/qcom: Add support for LMh driver firmware: qcom_scm: Introduce SCM calls to access LMh thermal/drivers/tegra-soctherm: Silence message about clamped temperature thermal: Spelling s/scallbacks/callbacks/ dt-bindings: thermal: Make trips node optional thermal/core: Fix thermal_cooling_device_register() prototype thermal/drivers/int340x: Use IMOK independently tools/thermal/tmon: Add cross compiling support thermal/tools/tmon: Improve the Makefile MAINTAINERS: Add missing userspace thermal tools to the thermal section thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions. thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int thermal/drivers/rcar_gen3_thermal: Add support for hardware trip points drivers/thermal/intel: Add TCC cooling support for AlderLake platform thermal/drivers/exynos: Fix an error code in exynos_tmu_probe() thermal/drivers/tegra: Correct compile-testing of drivers thermal/drivers/tegra: Add driver for Tegra30 thermal sensor
2021-09-09thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not usedMatthias Kaehlcke1-0/+6
adc_tm5_register_tzd() registers the thermal zone sensors for all channels of the thermal monitor. If the registration of one channel fails the function skips the processing of the remaining channels and returns an error, which results in _probe() being aborted. One of the reasons the registration could fail is that none of the thermal zones is using the channel/sensor, which hardly is a critical error (if it is an error at all). If this case is detected emit a warning and continue with processing the remaining channels. Fixes: ca66dca5eda6 ("thermal: qcom: add support for adc-tm5 PMIC thermal monitor") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reported-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210823134726.1.I1dd23ddf77e5b3568625d80d6827653af071ce19@changeid
2021-09-09thermal/drivers/intel: Allow processing of HWP interruptSrinivas Pandruvada2-1/+9
Add a weak function to process HWP (Hardware P-states) notifications and move updating HWP_STATUS MSR to this function. This allows HWP interrupts to be processed by the intel_pstate driver in HWP mode by overriding the implementation. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210820024006.2347720-1-srinivas.pandruvada@linux.intel.com
2021-09-08Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge more updates from Andrew Morton: "147 patches, based on 7d2a07b769330c34b4deabeed939325c77a7ec2f. Subsystems affected by this patch series: mm (memory-hotplug, rmap, ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan), alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib, checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig, selftests, ipc, and scripts" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits) scripts: check_extable: fix typo in user error message mm/workingset: correct kernel-doc notations ipc: replace costly bailout check in sysvipc_find_ipc() selftests/memfd: remove unused variable Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH configs: remove the obsolete CONFIG_INPUT_POLLDEV prctl: allow to setup brk for et_dyn executables pid: cleanup the stale comment mentioning pidmap_init(). kernel/fork.c: unexport get_{mm,task}_exe_file coredump: fix memleak in dump_vma_snapshot() fs/coredump.c: log if a core dump is aborted due to changed file permissions nilfs2: use refcount_dec_and_lock() to fix potential UAF nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group nilfs2: fix NULL pointer in nilfs_##name##_attr_release nilfs2: fix memory leak in nilfs_sysfs_create_device_group trap: cleanup trap_init() init: move usermodehelper_enable() to populate_rootfs() ...
2021-09-08thermal/drivers/devfreq_cooling: use HZ macrosDaniel Lezcano1-1/+1
HZ unit conversion macros are available in units.h, use them and remove the duplicate definition. The new macro uses a unsigned long type which is already the type in the current code via the 'freq' variable. Link: https://lkml.kernel.org/r/20210816114732.1834145-4-daniel.lezcano@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Christian Eggers <ceggers@arri.de> Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Lukasz Luba <lukasz.luba@arm.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-02Merge tag 'platform-drivers-x86-v5.15-1' of ↵Linus Torvalds3-0/+533
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "Highlights: - Move all the Intel drivers into their own subdir(s) (mostly Kate's work) - New meraki-mx100 platform driver - Asus WMI driver enhancements, including support for /sys/firmware/acpi/platform_profile - New BIOS SAR driver for Intel M.2 WWAM modems - Alder Lake support for the Intel PMC driver - A whole bunch of cleanups + fixes all over the place" * tag 'platform-drivers-x86-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits) platform/x86: dell-smbios-wmi: Add missing kfree in error-exit from run_smbios_call platform/x86: dell-smbios-wmi: Avoid false-positive memcpy() warning platform/x86: ISST: use semi-colons instead of commas platform/x86: asus-wmi: Fix "unsigned 'retval' is never less than zero" smatch warning platform/x86: asus-wmi: Delete impossible condition platform/x86: hp_accel: Convert to be a platform driver platform/x86: hp_accel: Remove _INI method call platform/mellanox: mlxbf-pmc: fix kernel-doc notation platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake PCH platform/x86/intel: pmc/core: Add Alder Lake low power mode support for pmc core platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver platform/x86: intel-wmi-thunderbolt: Move to intel sub-directory platform/x86: intel-wmi-sbl-fw-update: Move to intel sub-directory platform/x86: intel-vbtn: Move to intel sub-directory platform/x86: intel_oaktrail: Move to intel sub-directory platform/x86: intel_int0002_vgpio: Move to intel sub-directory platform/x86: intel-hid: Move to intel sub-directory platform/x86: intel_atomisp2: Move to intel sub-directory platform/x86: intel_speed_select_if: Move to intel sub-directory ...
2021-08-25thermal: intel: Allow processing of HWP interruptSrinivas Pandruvada2-1/+9
Add a weak function to process HWP (Hardware P-states) notifications and move updating HWP_STATUS MSR to this function. This allows HWP interrupts to be processed by the intel_pstate driver in HWP mode by overriding the implementation. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-08-18thermal/drivers/qcom: Add support for LMh driverThara Gopinath3-0/+243
Driver enabling various pieces of Limits Management Hardware(LMh) for cpu cluster0 and cpu cluster1 namely kick starting monitoring of temperature, current, battery current violations, enabling reliability algorithm and setting up various temperature limits. The following has been explained in the cover letter. I am including this here so that this remains in the commit message as well. LMh is a hardware infrastructure on some Qualcomm SoCs that can enforce temperature and current limits as programmed by software for certain IPs like CPU. On many newer LMh is configured by firmware/TZ and no programming is needed from the kernel side. But on certain SoCs like sdm845 the firmware does not do a complete programming of the h/w. On such soc's kernel software has to explicitly set up the temperature limits and turn on various monitoring and enforcing algorithms on the hardware. Tested-by: Steev Klimaszewski <steev@kali.org> # Lenovo Yoga C630 Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210809191605.3742979-3-thara.gopinath@linaro.org
2021-08-17thermal/drivers/intel: Move intel_menlow to thermal driversSrinivas Pandruvada3-0/+533
Moved drivers/platform/x86/intel_menlow.c to drivers/thermal/intel. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20210816035356.1955982-1-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-08-14thermal/drivers/tegra-soctherm: Silence message about clamped temperatureDmitry Osipenko1-2/+2
The Tegra soctherm driver prints message about the clamped temperature trip each time when thermal core disables the low/high trip. The message is confusing and creates illusion that driver is malfunctioning. Turn that noisy info message into a debug message. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210712002353.17276-1-digetx@gmail.com
2021-08-14thermal/drivers/int340x: Use IMOK independentlySumeet Pawnikar1-1/+13
Some chrome platform requires IMOK method in coreboot. But these platforms don't use GDDV data vault in coreboot. As per current code flow, to enable and use IMOK only, we need to have GDDV support as well in coreboot. This patch removes the dependency for IMOK from GDDV to enable and use IMOK independently. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210716163946.3142-1-sumeet.r.pawnikar@intel.com
2021-08-14thermal/drivers/intel_powerclamp: Replace deprecated CPU-hotplug functions.Sebastian Andrzej Siewior1-2/+2
The functions get_online_cpus() and put_online_cpus() have been deprecated during the CPU hotplug rework. They map directly to cpus_read_lock() and cpus_read_unlock(). Replace deprecated CPU-hotplug functions with the official version. The behavior remains unchanged. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amitk@kernel.org> Cc: linux-pm@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210803141621.780504-20-bigeasy@linutronix.de
2021-08-14thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned intNiklas Söderlund1-3/+4
The TSC id and number of TSC ids should be stored as unsigned int as they can't be negative. Fix the datatype of the loop counter 'i' and rcar_gen3_thermal_tsc.id to reflect this. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210804091818.2196806-3-niklas.soderlund+renesas@ragnatech.se
2021-08-14thermal/drivers/rcar_gen3_thermal: Add support for hardware trip pointsNiklas Söderlund1-4/+99
All supported hardware except V3U is capable of generating interrupts to the CPU when the temperature go below or above a set value. Use this to implement support for the set_trip() feature of the thermal core on supported hardware. The V3U have its interrupts routed to the ECM module and therefore can not be used to implement set_trip() as the driver can't be made aware of when the interrupt triggers. Each TSC is capable of tracking up-to three different temperatures while only two are needed to implement the tracking of the thermal window. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210804091818.2196806-2-niklas.soderlund+renesas@ragnatech.se
2021-08-14drivers/thermal/intel: Add TCC cooling support for AlderLake platformSumeet Pawnikar1-0/+2
Add tcc cooling support for the AlderLake platform. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210809115635.10100-1-sumeet.r.pawnikar@intel.com
2021-08-14thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()Dan Carpenter1-0/+1
This error path return success but it should propagate the negative error code from devm_clk_get(). Fixes: 6c247393cfdd ("thermal: exynos: Add TMU support for Exynos7 SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210810084413.GA23810@kili
2021-08-14thermal/drivers/tegra: Correct compile-testing of driversDmitry Osipenko1-1/+1
All Tegra thermal drivers support compile-testing, but the drivers are not available for compile-testing because the whole Kconfig meny entry depends on ARCH_TEGRA, missing the alternative COMPILE_TEST dependency option. Correct the Kconfig entry. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210617072403.3487-1-digetx@gmail.com
2021-08-14thermal/drivers/tegra: Add driver for Tegra30 thermal sensorDmitry Osipenko3-0/+681
All NVIDIA Tegra30 SoCs have a two-channel on-chip sensor unit which monitors temperature and voltage of the SoC. Sensors control CPU frequency throttling, which is activated by hardware once preprogrammed temperature level is breached, they also send signal to Power Management controller to perform emergency shutdown on a critical overheat of the SoC die. Add driver for the Tegra30 TSENSOR module, exposing it as a thermal sensor. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # Asus TF201T Tested-by: Ihor Didenko <tailormoon@rambler.ru> # Asus TF300T Tested-by: Ion Agorria <ion@agorria.com> # Asus TF201T Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210616190417.32214-4-digetx@gmail.com
2021-07-10Merge tag 'thermal-v5.14-rc1' of ↵Linus Torvalds18-299/+895
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add rk3568 sensor support (Finley Xiao) - Add missing MODULE_DEVICE_TABLE for the Spreadtrum sensor (Chunyan Zhang) - Export additionnal attributes for the int340x thermal processor (Srinivas Pandruvada) - Add SC7280 compatible for the tsens driver (Rajeshwari Ravindra Kamble) - Fix kernel documentation for thermal_zone_device_unregister() and use devm_platform_get_and_ioremap_resource() (Yang Yingliang) - Fix coefficient calculations for the rcar_gen3 sensor driver (Niklas Söderlund) - Fix shadowing variable rcar_gen3_ths_tj_1 (Geert Uytterhoeven) - Add missing of_node_put() for the iMX and Spreadtrum sensors (Krzysztof Kozlowski) - Add tegra3 thermal sensor DT bindings (Dmitry Osipenko) - Stop the thermal zone monitoring when unregistering it to prevent a temperature update without the 'get_temp' callback (Dmitry Osipenko) - Add rk3568 DT bindings, convert bindings to yaml schemas and add the corresponding compatible in the Rockchip sensor (Ezequiel Garcia) - Add the sc8180x compatible for the Qualcomm tsensor (Bjorn Andersson) - Use the find_first_zero_bit() function instead of custom code (Andy Shevchenko) - Fix the kernel doc for the device cooling device (Yang Li) - Reorg the processor thermal int340x to set the scene for the PCI mmio driver (Srinivas Pandruvada) - Add PCI MMIO driver for the int340x processor thermal driver (Srinivas Pandruvada) - Add hwmon sensors for the mediatek sensor (Frank Wunderlich) - Fix warning for return value reported by Smatch for the int340x thermal processor (Srinivas Pandruvada) - Fix wrong register access and decoding for the int340x thermal processor (Srinivas Pandruvada) * tag 'thermal-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (23 commits) thermal/drivers/int340x/processor_thermal: Fix tcc setting thermal/drivers/int340x/processor_thermal: Fix warning for return value thermal/drivers/mediatek: Add sensors-support thermal/drivers/int340x/processor_thermal: Add PCI MMIO based thermal driver thermal/drivers/int340x/processor_thermal: Split enumeration and processing part thermal: devfreq_cooling: Fix kernel-doc thermal/drivers/intel/intel_soc_dts_iosf: Switch to use find_first_zero_bit() dt-bindings: thermal: tsens: Add sc8180x compatible dt-bindings: rockchip-thermal: Support the RK3568 SoC compatible dt-bindings: thermal: convert rockchip-thermal to json-schema thermal/core/thermal_of: Stop zone device before unregistering it dt-bindings: thermal: Add binding for Tegra30 thermal sensor thermal/drivers/sprd: Add missing of_node_put for loop iteration thermal/drivers/imx_sc: Add missing of_node_put for loop iteration thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1 thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations thermal/drivers/st: Use devm_platform_get_and_ioremap_resource() thermal/core: Correct function name thermal_zone_device_unregister() dt-bindings: thermal: tsens: Add compatible string to TSENS binding for SC7280 thermal/drivers/int340x: processor_thermal: Export additional attributes ...
2021-07-04thermal/drivers/int340x/processor_thermal: Fix tcc settingSrinivas Pandruvada1-8/+12
The following fixes are done for tcc sysfs interface: - TCC is 6 bits only from bit 29-24 - TCC of 0 is valid - When BIT(31) is set, this register is read only - Check for invalid tcc value - Error for negative values Fixes: fdf4f2fb8e899 ("drivers: thermal: processor_thermal_device: Export sysfs interface for TCC offset") Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: stable@vger.kernel.org Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210628215803.75038-1-srinivas.pandruvada@linux.intel.com
2021-07-04thermal/drivers/int340x/processor_thermal: Fix warning for return valueSrinivas Pandruvada1-1/+3
Fix smatch warnings: drivers/thermal/intel/int340x_thermal/processor_thermal_device_pci.c:258 proc_thermal_pci_probe() warn: missing error code 'ret' Use PTR_ERR to return failure of thermal_zone_device_register(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210628183232.62877-1-srinivas.pandruvada@linux.intel.com
2021-07-04thermal/drivers/mediatek: Add sensors-supportFrank Wunderlich1-0/+6
Add HWMON-support to mediateks thermal driver to allow lm-sensors userspace tools read soc temperature Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210608154530.70074-1-linux@fw-web.de
2021-07-04thermal/drivers/int340x/processor_thermal: Add PCI MMIO based thermal driverSrinivas Pandruvada4-1/+373
Add a new PCI driver which register a thermal zone and allows to get notification for threshold violation by a RW trip point. These notifications are delivered from the device using MSI based interrupt. The main difference between this new PCI driver and the existing one is that the temperature and trip points directly use PCI MMIO instead of using ACPI methods. This driver registers a thermal zone "TCPU_PCI" in addition to the legacy processor thermal device, which uses ACPI companion device to set name, temperature and trips. This driver is enabled for AlderLake. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210525204811.3793651-3-srinivas.pandruvada@linux.intel.com
2021-07-04thermal/drivers/int340x/processor_thermal: Split enumeration and processing partSrinivas Pandruvada5-259/+286
Remove enumeration part from the processor_thermal_device to two different modules. One for ACPI and one for PCI: ACPI enumeration: int3401_thermal PCI part: processor_thermal_device_pci_legacy The current processor_thermal_device now just implements interface functions to be used by the ACPI and PCI enumeration module. This is done by: 1. Make functions proc_thermal_add() and proc_thermal_remove() non static and export them for usage in other processor_thermal_device_pci_legacy.c and in int3401_thermal.c. 2. Move the sysfs file creation for TCC offset and power limit attribute group to the proc_thermal_add() from the individual enumeration callbacks for PCI and ACPI. 3. Create new interface functions proc_thermal_mmio_add() and proc_thermal_mmio_remove() which will be called from the processor_thermal_device_pci_legacy module. 4. Export proc_thermal_resume(), so that it can be used by power management callbacks. 5. Remove special check for double enumeration as it never happens. While here, fix some cleanup on error conditions in proc_thermal_add(). No functional changes are expected with this change. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210525204811.3793651-2-srinivas.pandruvada@linux.intel.com
2021-07-04thermal: devfreq_cooling: Fix kernel-docYang Li1-1/+1
Fix function name in devfreq_cooling.c comment to remove a warning found by kernel-doc. drivers/thermal/devfreq_cooling.c:479: warning: expecting prototype for devfreq_cooling_em_register_power(). Prototype was for devfreq_cooling_em_register() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1623223350-128104-1-git-send-email-yang.lee@linux.alibaba.com
2021-07-04thermal/drivers/intel/intel_soc_dts_iosf: Switch to use find_first_zero_bit()Andy Shevchenko1-7/+8
Switch to use find_first_zero_bit() instead of open-coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210618153451.89246-1-andriy.shevchenko@linux.intel.com
2021-07-04thermal/core/thermal_of: Stop zone device before unregistering itDmitry Osipenko1-0/+3
Zone device is enabled after thermal_zone_of_sensor_register() completion, but it's not disabled before senor is unregistered, leaving temperature polling active. This results in accessing a disabled zone device and produces a warning about this problem. Stop zone device before unregistering it in order to fix this "use-after-free" problem. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210616190417.32214-3-digetx@gmail.com
2021-06-28Merge tag 'sched-core-2021-06-28' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler udpates from Ingo Molnar: - Changes to core scheduling facilities: - Add "Core Scheduling" via CONFIG_SCHED_CORE=y, which enables coordinated scheduling across SMT siblings. This is a much requested feature for cloud computing platforms, to allow the flexible utilization of SMT siblings, without exposing untrusted domains to information leaks & side channels, plus to ensure more deterministic computing performance on SMT systems used by heterogenous workloads. There are new prctls to set core scheduling groups, which allows more flexible management of workloads that can share siblings. - Fix task->state access anti-patterns that may result in missed wakeups and rename it to ->__state in the process to catch new abuses. - Load-balancing changes: - Tweak newidle_balance for fair-sched, to improve 'memcache'-like workloads. - "Age" (decay) average idle time, to better track & improve workloads such as 'tbench'. - Fix & improve energy-aware (EAS) balancing logic & metrics. - Fix & improve the uclamp metrics. - Fix task migration (taskset) corner case on !CONFIG_CPUSET. - Fix RT and deadline utilization tracking across policy changes - Introduce a "burstable" CFS controller via cgroups, which allows bursty CPU-bound workloads to borrow a bit against their future quota to improve overall latencies & batching. Can be tweaked via /sys/fs/cgroup/cpu/<X>/cpu.cfs_burst_us. - Rework assymetric topology/capacity detection & handling. - Scheduler statistics & tooling: - Disable delayacct by default, but add a sysctl to enable it at runtime if tooling needs it. Use static keys and other optimizations to make it more palatable. - Use sched_clock() in delayacct, instead of ktime_get_ns(). - Misc cleanups and fixes. * tag 'sched-core-2021-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits) sched/doc: Update the CPU capacity asymmetry bits sched/topology: Rework CPU capacity asymmetry detection sched/core: Introduce SD_ASYM_CPUCAPACITY_FULL sched_domain flag psi: Fix race between psi_trigger_create/destroy sched/fair: Introduce the burstable CFS controller sched/uclamp: Fix uclamp_tg_restrict() sched/rt: Fix Deadline utilization tracking during policy change sched/rt: Fix RT utilization tracking during policy change sched: Change task_struct::state sched,arch: Remove unused TASK_STATE offsets sched,timer: Use __set_current_state() sched: Add get_current_state() sched,perf,kvm: Fix preemption condition sched: Introduce task_is_running() sched: Unbreak wakeups sched/fair: Age the average idle time sched/cpufreq: Consider reduced CPU capacity in energy calculation sched/fair: Take thermal pressure into account while estimating energy thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure sched/fair: Return early from update_tg_cfs_load() if delta == 0 ...
2021-06-23Merge remote-tracking branch 'regulator/for-5.14' into regulator-nextMark Brown1-59/+4
2021-06-21thermal: Use generic HW-protection shutdown APIMatti Vaittinen1-59/+4
The hardware shutdown function was exported from kernel/reboot for other subsystems to use. Logic is copied from the thermal_core. The protection mutex is replaced by an atomic_t to allow calls also from an IRQ context. Also the WARN() was replaced by pr_emerg() based on discussions here: https://lore.kernel.org/lkml/YJuPwAZroVZ%2Fw633@alley/ and here: https://lore.kernel.org/linux-iommu/20210331093104.383705-4-geert+renesas@glider.be/ Use the exported API instead of implementing own just for the thermal_core. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/5531e89d9e710f5d10e7cdce3ee58957335b9e03.1622628333.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-18Merge branch 'sched/urgent' into sched/core, to resolve conflictsIngo Molnar1-4/+11
This commit in sched/urgent moved the cfs_rq_is_decayed() function: a7b359fc6a37: ("sched/fair: Correctly insert cfs_rq's to list on unthrottle") and this fresh commit in sched/core modified it in the old location: 9e077b52d86a: ("sched/pelt: Check that *_avg are null when *_sum are") Merge the two variants. Conflicts: kernel/sched/fair.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-06-17thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressureLukasz Luba1-1/+1
The thermal pressure signal gives information to the scheduler about reduced CPU capacity due to thermal. It is based on a value stored in a per-cpu 'thermal_pressure' variable. The online CPUs will get the new value there, while the offline won't. Unfortunately, when the CPU is back online, the value read from per-cpu variable might be wrong (stale data). This might affect the scheduler decisions, since it sees the CPU capacity differently than what is actually available. Fix it by making sure that all online+offline CPUs would get the proper value in their per-cpu variable when thermal framework sets capping. Fixes: f12e4f66ab6a3 ("thermal/cpu-cooling: Update thermal pressure in case of a maximum frequency capping") Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20210614191030.22241-1-lukasz.luba@arm.com
2021-06-14thermal/drivers/sprd: Add missing of_node_put for loop iterationKrzysztof Kozlowski1-6/+9
Early exits from for_each_available_child_of_node() should decrement the node reference counter. Reported by Coccinelle: drivers/thermal/sprd_thermal.c:387:1-23: WARNING: Function "for_each_child_of_node" should have of_node_put() before goto around lines 391. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210614192230.19248-2-krzysztof.kozlowski@canonical.com
2021-06-14thermal/drivers/imx_sc: Add missing of_node_put for loop iterationKrzysztof Kozlowski1-0/+3
Early exits from for_each_available_child_of_node() should decrement the node reference counter. Reported by Coccinelle: drivers/thermal/imx_sc_thermal.c:93:1-33: WARNING: Function "for_each_available_child_of_node" should have of_node_put() before return around line 97. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210614192230.19248-1-krzysztof.kozlowski@canonical.com
2021-06-14thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1Geert Uytterhoeven1-3/+2
With -Wshadow: drivers/thermal/rcar_gen3_thermal.c: In function ‘rcar_gen3_thermal_probe’: drivers/thermal/rcar_gen3_thermal.c:310:13: warning: declaration of ‘rcar_gen3_ths_tj_1’ shadows a global declaration [-Wshadow] 310 | const int *rcar_gen3_ths_tj_1 = of_device_get_match_data(dev); | ^~~~~~~~~~~~~~~~~~ drivers/thermal/rcar_gen3_thermal.c:246:18: note: shadowed declaration is here 246 | static const int rcar_gen3_ths_tj_1 = 126; | ^~~~~~~~~~~~~~~~~~ To add to the confusion, the local variable has a different type. Fix the shadowing by renaming the local variable to ths_tj_1. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/9ea7e65d0331daba96f9a7925cb3d12d2170efb1.1623076804.git.geert+renesas@glider.be
2021-06-14thermal/drivers/rcar_gen3_thermal: Fix coefficient calculationsNiklas Söderlund1-1/+1
The fixed value of 157 used in the calculations are only correct for M3-W, on other Gen3 SoC it should be 167. The constant can be derived correctly from the static TJ_3 constant and the SoC specific TJ_1 value. Update the calculation be correct on all Gen3 SoCs. Fixes: 4eb39f79ef44 ("thermal: rcar_gen3_thermal: Update value of Tj_1") Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210605085211.564909-1-niklas.soderlund+renesas@ragnatech.se
2021-06-14thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()Yang Yingliang1-11/+2
Use devm_platform_get_and_ioremap_resource() to simplify code and remove error message which within devm_platform_get_and_ioremap_resource() already. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210605120205.2459578-1-yangyingliang@huawei.com
2021-06-12thermal/core: Correct function name thermal_zone_device_unregister()Yang Yingliang1-1/+1
Fix the following make W=1 kernel build warning: drivers/thermal/thermal_core.c:1376: warning: expecting prototype for thermal_device_unregister(). Prototype was for thermal_zone_device_unregister() instead Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210517051020.3463536-1-yangyingliang@huawei.com
2021-06-11thermal/drivers/int340x: processor_thermal: Export additional attributesSrinivas Pandruvada1-0/+55
Export additional attributes: ddr_data_rate (RO) : Show current DDR (Double Data Rate) data rate. rfi_restriction (RW) : Show or set current state for RFI (Radio Frequency Interference) protection. These attributes use mailbox commands to get/set information. Here command codes are: 0x0007: Read RFI restriction 0x0107: Read DDR data rate 0x0008: Write RFI restriction Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210517061441.1921901-3-srinivas.pandruvada@linux.intel.com
2021-06-11thermal/drivers/int340x: processor_thermal: Export mailbox interfaceSrinivas Pandruvada2-3/+11
Export the mailbox interface to be used by other modules. Also change command id and response from u8 to u32 data type. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210517061441.1921901-2-srinivas.pandruvada@linux.intel.com
2021-06-11thermal/drivers/sprd: Add missing MODULE_DEVICE_TABLEChunyan Zhang1-0/+1
MODULE_DEVICE_TABLE is used to extract the device information out of the driver and builds a table when being compiled. If using this macro, kernel can find the driver if available when the device is plugged in, and then loads that driver and initializes the device. Fixes: 554fdbaf19b18 ("thermal: sprd: Add Spreadtrum thermal driver support") Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210512093752.243168-1-zhang.lyra@gmail.com
2021-06-11thermal/drivers/rockchip: Support RK3568 SoCs in the thermal driverFinley Xiao1-0/+121
The RK3568 SoCs have two Temperature Sensors, channel 0 is for CPU, channel 1 is for GPU. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210506175514.168365-5-ezequiel@collabora.com
2021-06-06Merge tag 'x86_urgent_for_v5.13-rc5' of ↵Linus Torvalds1-4/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "A bunch of x86/urgent stuff accumulated for the last two weeks so lemme unload it to you. It should be all totally risk-free, of course. :-) - Fix out-of-spec hardware (1st gen Hygon) which does not implement MSR_AMD64_SEV even though the spec clearly states so, and check CPUID bits first. - Send only one signal to a task when it is a SEGV_PKUERR si_code type. - Do away with all the wankery of reserving X amount of memory in the first megabyte to prevent BIOS corrupting it and simply and unconditionally reserve the whole first megabyte. - Make alternatives NOP optimization work at an arbitrary position within the patched sequence because the compiler can put single-byte NOPs for alignment anywhere in the sequence (32-bit retpoline), vs our previous assumption that the NOPs are only appended. - Force-disable ENQCMD[S] instructions support and remove update_pasid() because of insufficient protection against FPU state modification in an interrupt context, among other xstate horrors which are being addressed at the moment. This one limits the fallout until proper enablement. - Use cpu_feature_enabled() in the idxd driver so that it can be build-time disabled through the defines in disabled-features.h. - Fix LVT thermal setup for SMI delivery mode by making sure the APIC LVT value is read before APIC initialization so that softlockups during boot do not happen at least on one machine. - Mark all legacy interrupts as legacy vectors when the IO-APIC is disabled and when all legacy interrupts are routed through the PIC" * tag 'x86_urgent_for_v5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sev: Check SME/SEV support in CPUID first x86/fault: Don't send SIGSEGV twice on SEGV_PKUERR x86/setup: Always reserve the first 1M of RAM x86/alternative: Optimize single-byte NOPs at an arbitrary position x86/cpufeatures: Force disable X86_FEATURE_ENQCMD and remove update_pasid() dmaengine: idxd: Use cpu_feature_enabled() x86/thermal: Fix LVT thermal setup for SMI delivery mode x86/apic: Mark _all_ legacy interrupts when IO/APIC is missing
2021-05-31x86/thermal: Fix LVT thermal setup for SMI delivery modeBorislav Petkov1-4/+11
There are machines out there with added value crap^WBIOS which provide an SMI handler for the local APIC thermal sensor interrupt. Out of reset, the BSP on those machines has something like 0x200 in that APIC register (timestamps left in because this whole issue is timing sensitive): [ 0.033858] read lvtthmr: 0x330, val: 0x200 which means: - bit 16 - the interrupt mask bit is clear and thus that interrupt is enabled - bits [10:8] have 010b which means SMI delivery mode. Now, later during boot, when the kernel programs the local APIC, it soft-disables it temporarily through the spurious vector register: setup_local_APIC: ... /* * If this comes from kexec/kcrash the APIC might be enabled in * SPIV. Soft disable it before doing further initialization. */ value = apic_read(APIC_SPIV); value &= ~APIC_SPIV_APIC_ENABLED; apic_write(APIC_SPIV, value); which means (from the SDM): "10.4.7.2 Local APIC State After It Has Been Software Disabled ... * The mask bits for all the LVT entries are set. Attempts to reset these bits will be ignored." And this happens too: [ 0.124111] APIC: Switch to symmetric I/O mode setup [ 0.124117] lvtthmr 0x200 before write 0xf to APIC 0xf0 [ 0.124118] lvtthmr 0x10200 after write 0xf to APIC 0xf0 This results in CPU 0 soft lockups depending on the placement in time when the APIC soft-disable happens. Those soft lockups are not 100% reproducible and the reason for that can only be speculated as no one tells you what SMM does. Likely, it confuses the SMM code that the APIC is disabled and the thermal interrupt doesn't doesn't fire at all, leading to CPU 0 stuck in SMM forever... Now, before 4f432e8bb15b ("x86/mce: Get rid of mcheck_intel_therm_init()") due to how the APIC_LVTTHMR was read before APIC initialization in mcheck_intel_therm_init(), it would read the value with the mask bit 16 clear and then intel_init_thermal() would replicate it onto the APs and all would be peachy - the thermal interrupt would remain enabled. But that commit moved that reading to a later moment in intel_init_thermal(), resulting in reading APIC_LVTTHMR on the BSP too late and with its interrupt mask bit set. Thus, revert back to the old behavior of reading the thermal LVT register before the APIC gets initialized. Fixes: 4f432e8bb15b ("x86/mce: Get rid of mcheck_intel_therm_init()") Reported-by: James Feeney <james@nurealm.net> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lkml.kernel.org/r/YKIqDdFNaXYd39wz@zn.tnic
2021-05-27thermal/drivers/qcom: Fix error code in adc_tm5_get_dt_channel_data()Yang Yingliang1-1/+1
Return -EINVAL when args is invalid instead of 'ret' which is set to zero by a previous successful call to a function. Fixes: ca66dca5eda6 ("thermal: qcom: add support for adc-tm5 PMIC thermal monitor") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210527092640.2070555-1-yangyingliang@huawei.com
2021-05-24thermal/ti-soc-thermal: Fix kernel-docYang Li1-1/+1
Fix function name in ti-bandgap.c kernel-doc comment to remove a warning. drivers/thermal/ti-soc-thermal/ti-bandgap.c:787: warning: expecting prototype for ti_bandgap_alert_init(). Prototype was for ti_bandgap_talert_init() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1621851963-36548-1-git-send-email-yang.lee@linux.alibaba.com
2021-05-14thermal/drivers/intel: Initialize RW trip to THERMAL_TEMP_INVALIDSrinivas Pandruvada2-1/+5
After commit 81ad4276b505 ("Thermal: Ignore invalid trip points") all user_space governor notifications via RW trip point is broken in intel thermal drivers. This commits marks trip_points with value of 0 during call to thermal_zone_device_register() as invalid. RW trip points can be 0 as user space will set the correct trip temperature later. During driver init, x86_package_temp and all int340x drivers sets RW trip temperature as 0. This results in all these trips marked as invalid by the thermal core. To fix this initialize RW trips to THERMAL_TEMP_INVALID instead of 0. Cc: <stable@vger.kernel.org> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210430122343.1789899-1-srinivas.pandruvada@linux.intel.com
2021-05-05Merge tag 'thermal-v5.13-rc1' of ↵Linus Torvalds27-371/+706
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Remove duplicate error message for the amlogic driver (Tang Bin) - Fix spellos in comments for the tegra and sun8i (Bhaskar Chowdhury) - Add the missing fifth node on the rcar_gen3 sensor (Niklas Söderlund) - Remove duplicate include in ti-bandgap (Zhang Yunkai) - Assign error code in the error path in the function thermal_of_populate_bind_params() (Jia-Ju Bai) - Fix spelling mistake in a comment 'disabed' -> 'disabled' (Colin Ian King) - Use the device name instead of auto-numbering for a better identification of the cooling device (Daniel Lezcano) - Improve a bit the division accuracy in the power allocator governor (Jeson Gao) - Enable the missing third sensor on msm8976 (Konrad Dybcio) - Add QCom tsens driver co-maintainer (Thara Gopinath) - Fix memory leak and use after free errors in the core code (Daniel Lezcano) - Add the MDM9607 compatible bindings (Konrad Dybcio) - Fix trivial spello in the copyright name for Hisilicon (Hao Fang) - Fix negative index array access when converting the frequency to power in the energy model (Brian-sy Yang) - Add support for Gen2 new PMIC support for Qcom SPMI (David Collins) - Update maintainer file for CPU cooling device section (Lukasz Luba) - Fix missing put_device on error in the Qcom tsens driver (Guangqing Zhu) - Add compatible DT binding for sm8350 (Robert Foss) - Add support for the MDM9607's tsens driver (Konrad Dybcio) - Remove duplicate error messages in thermal_mmio and the bcm2835 driver (Ruiqi Gong) - Add the Thermal Temperature Cooling driver (Zhang Rui) - Remove duplicate error messages in the Hisilicon sensor driver (Ye Bin) - Use the devm_platform_ioremap_resource_byname() function instead of a couple of corresponding calls (dingsenjie) - Sort the headers alphabetically in the ti-bandgap driver (Zhen Lei) - Add missing property in the DT thermal sensor binding (Rafał Miłecki) - Remove dead code in the ti-bandgap sensor driver (Lin Ruizhe) - Convert the BRCM DT bindings to the yaml schema (Rafał Miłecki) - Replace the thermal_notify_framework() call by a call to the thermal_zone_device_update() function. Remove the function as well as the corresponding documentation (Thara Gopinath) - Add support for the ipq8064-tsens sensor along with a set of cleanups and code preparation (Ansuel Smith) - Add a lockless __thermal_cdev_update() function to improve the locking scheme in the core code and governors (Lukasz Luba) - Fix multiple cooling device notification changes (Lukasz Luba) - Remove unneeded variable initialization (Colin Ian King) * tag 'thermal-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (55 commits) thermal/drivers/mtk_thermal: Remove redundant initializations of several variables thermal/core/power allocator: Use the lockless __thermal_cdev_update() function thermal/core/fair share: Use the lockless __thermal_cdev_update() function thermal/core/fair share: Lock the thermal zone while looping over instances thermal/core/power_allocator: Update once cooling devices when temp is low thermal/core/power_allocator: Maintain the device statistics from going stale thermal/core: Create a helper __thermal_cdev_update() without a lock dt-bindings: thermal: tsens: Document ipq8064 bindings thermal/drivers/tsens: Add support for ipq8064-tsens thermal/drivers/tsens: Drop unused define for msm8960 thermal/drivers/tsens: Replace custom 8960 apis with generic apis thermal/drivers/tsens: Fix bug in sensor enable for msm8960 thermal/drivers/tsens: Use init_common for msm8960 thermal/drivers/tsens: Add VER_0 tsens version thermal/drivers/tsens: Convert msm8960 to reg_field thermal/drivers/tsens: Don't hardcode sensor slope Documentation: driver-api: thermal: Remove thermal_notify_framework from documentation thermal/core: Remove thermal_notify_framework iwlwifi: mvm: tt: Replace thermal_notify_framework dt-bindings: thermal: brcm,ns-thermal: Convert to the json-schema ...
2021-04-23thermal/drivers/mtk_thermal: Remove redundant initializations of several ↵Colin Ian King1-6/+6
variables Several variables are being initialized with values that is never read and being updated later with a new value. The initializations are redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422120412.246291-1-colin.king@canonical.com
2021-04-23thermal/core/power allocator: Use the lockless __thermal_cdev_update() functionLukasz Luba1-2/+1
Use the new helper function and avoid unnecessery second lock/unlock, which was present in old approach with thermal_cdev_update(). Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210422153624.6074-4-lukasz.luba@arm.com