summaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)AuthorFilesLines
2013-11-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-16/+9
Pull networking fixes from David Miller: "Mostly these are fixes for fallout due to merge window changes, as well as cures for problems that have been with us for a much longer period of time" 1) Johannes Berg noticed two major deficiencies in our genetlink registration. Some genetlink protocols we passing in constant counts for their ops array rather than something like ARRAY_SIZE(ops) or similar. Also, some genetlink protocols were using fixed IDs for their multicast groups. We have to retain these fixed IDs to keep existing userland tools working, but reserve them so that other multicast groups used by other protocols can not possibly conflict. In dealing with these two problems, we actually now use less state management for genetlink operations and multicast groups. 2) When configuring interface hardware timestamping, fix several drivers that simply do not validate that the hwtstamp_config value is one the driver actually supports. From Ben Hutchings. 3) Invalid memory references in mwifiex driver, from Amitkumar Karwar. 4) In dev_forward_skb(), set the skb->protocol in the right order relative to skb_scrub_packet(). From Alexei Starovoitov. 5) Bridge erroneously fails to use the proper wrapper functions to make calls to netdev_ops->ndo_vlan_rx_{add,kill}_vid. Fix from Toshiaki Makita. 6) When detaching a bridge port, make sure to flush all VLAN IDs to prevent them from leaking, also from Toshiaki Makita. 7) Put in a compromise for TCP Small Queues so that deep queued devices that delay TX reclaim non-trivially don't have such a performance decrease. One particularly problematic area is 802.11 AMPDU in wireless. From Eric Dumazet. 8) Fix crashes in tcp_fastopen_cache_get(), we can see NULL socket dsts here. Fix from Eric Dumzaet, reported by Dave Jones. 9) Fix use after free in ipv6 SIT driver, from Willem de Bruijn. 10) When computing mergeable buffer sizes, virtio-net fails to take the virtio-net header into account. From Michael Dalton. 11) Fix seqlock deadlock in ip4_datagram_connect() wrt. statistic bumping, this one has been with us for a while. From Eric Dumazet. 12) Fix NULL deref in the new TIPC fragmentation handling, from Erik Hugne. 13) 6lowpan bit used for traffic classification was wrong, from Jukka Rissanen. 14) macvlan has the same issue as normal vlans did wrt. propagating LRO disabling down to the real device, fix it the same way. From Michal Kubecek. 15) CPSW driver needs to soft reset all slaves during suspend, from Daniel Mack. 16) Fix small frame pacing in FQ packet scheduler, from Eric Dumazet. 17) The xen-netfront RX buffer refill timer isn't properly scheduled on partial RX allocation success, from Ma JieYue. 18) When ipv6 ping protocol support was added, the AF_INET6 protocol initialization cleanup path on failure was borked a little. Fix from Vlad Yasevich. 19) If a socket disconnects during a read/recvmsg/recvfrom/etc that blocks we can do the wrong thing with the msg_name we write back to userspace. From Hannes Frederic Sowa. There is another fix in the works from Hannes which will prevent future problems of this nature. 20) Fix route leak in VTI tunnel transmit, from Fan Du. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) genetlink: make multicast groups const, prevent abuse genetlink: pass family to functions using groups genetlink: add and use genl_set_err() genetlink: remove family pointer from genl_multicast_group genetlink: remove genl_unregister_mc_group() hsr: don't call genl_unregister_mc_group() quota/genetlink: use proper genetlink multicast APIs drop_monitor/genetlink: use proper genetlink multicast APIs genetlink: only pass array to genl_register_family_with_ops() tcp: don't update snd_nxt, when a socket is switched from repair mode atm: idt77252: fix dev refcnt leak xfrm: Release dst if this dst is improper for vti tunnel netlink: fix documentation typo in netlink_set_err() be2net: Delete secondary unicast MAC addresses during be_close be2net: Fix unconditional enabling of Rx interface options net, virtio_net: replace the magic value ping: prevent NULL pointer dereference on write to msg_name bnx2x: Prevent "timeout waiting for state X" bnx2x: prevent CFC attention bnx2x: Prevent panic during DMAE timeout ...
2013-11-20genetlink: make multicast groups const, prevent abuseJohannes Berg1-16/+8
Register generic netlink multicast groups as an array with the family and give them contiguous group IDs. Then instead of passing the global group ID to the various functions that send messages, pass the ID relative to the family - for most families that's just 0 because the only have one group. This avoids the list_head and ID in each group, adding a new field for the mcast group ID offset to the family. At the same time, this allows us to prevent abusing groups again like the quota and dropmon code did, since we can now check that a family only uses a group it owns. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-20genetlink: pass family to functions using groupsJohannes Berg1-1/+2
This doesn't really change anything, but prepares for the next patch that will change the APIs to pass the group ID within the family, rather than the global group ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14Merge branch 'next' of ↵Linus Torvalds4-12/+38
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "This time we only have a few changes as there are no soc thermal changes from Eduardo. The only big change is the introduction of TMON, a tool to help visualize, tune, and test the thermal subsystem. The rest is mostly cleanups and fixes all over. Specifics: - introduce TMON, a tool base on thermal sysfs I/F. It can be used to visualize, tune and test the thermal subsystem. - fix a zone/cooling device binding problem, when both thermal zone bind parameters and .bind() callback are available" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: tools/thermal: Introduce tmon, a tool for thermal subsystem thermal: Fix binding problem when there is thermal zone params thermal: cpu_cooling: fix return value check in cpufreq_cooling_register() Thermal: Check for validity before doing kfree thermal/intel_powerclamp: Add newer CPU models Thermal: Tidy up error handling in powerclamp_init thermal: Kconfig: cosmetic fixes ACPI/thermal : Remove zone disabled warning typo in drivers/thermal/Kconfig: lpatform instead of platform
2013-11-07Merge branches 'intel_powerclamp', 'tmon' and 'misc' of .git into nextZhang Rui11-30/+72
2013-11-06thermal: Fix binding problem when there is thermal zone paramsNi Wade1-3/+4
The thermal zone params can be used to set governor to specific thermal governor for thermal zone device. But if the thermal zone params has only governor name without thermal bind params, then the thermal zone device will not be binding to cooling device. Because tz->ops->bind operator is not invoked in bind_tz() and bind_cdev() when there is thermal zone params. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Jinyoung Park <jinyoungp@nvidia.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-11-06thermal: cpu_cooling: fix return value check in cpufreq_cooling_register()Wei Yongjun1-2/+2
In case of error, the function thermal_cooling_device_register() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-10-28Merge branch 'pm-cpufreq'Rafael J. Wysocki1-1/+0
* pm-cpufreq: (167 commits) cpufreq: create per policy rwsem instead of per CPU cpu_policy_rwsem intel_pstate: Add Baytrail support intel_pstate: Refactor driver to support CPUs with different MSR layouts cpufreq: Implement light weight ->target_index() routine PM / OPP: rename header to linux/pm_opp.h PM / OPP: rename data structures to dev_pm equivalents PM / OPP: rename functions to dev_pm_opp* cpufreq / governor: Remove fossil comment cpufreq: exynos4210: Use the common clock framework to set APLL clock rate cpufreq: exynos4x12: Use the common clock framework to set APLL clock rate cpufreq: Detect spurious invocations of update_policy_cpu() cpufreq: pmac64: enable cpufreq on iMac G5 (iSight) model cpufreq: pmac64: provide cpufreq transition latency for older G5 models cpufreq: pmac64: speed up frequency switch cpufreq: highbank-cpufreq: Enable Midway/ECX-2000 exynos-cpufreq: fix false return check from "regulator_set_voltage" speedstep-centrino: Remove unnecessary braces acpi-cpufreq: Add comment under ACPI_ADR_SPACE_SYSTEM_IO case cpufreq: arm-big-little: use clk_get instead of clk_get_sys cpufreq: exynos: Show a list of available frequencies ... Conflicts: drivers/devfreq/exynos/exynos5_bus.c
2013-10-21Merge branch 'x86_pkg_temp' of .git into for-rcZhang Rui1-6/+8
2013-10-21Revert "drivers: thermal: parent virtual hwmon with thermal zone"Zhang Rui1-1/+1
Commit b82715fdd4a5407f56853b24d387d484dd9c3b5b introduces a 'device' subdirectory under /sys/class/hwmon/hwmonX/ directory, for the thermal_zone hwmon devices. And this results in different handling by libsensors. The problem is reported and discussed in this thread http://marc.info/?l=linux-pm&m=138229306109596&w=2 This patch reverts commit b82715fdd4a5407f56853b24d387d484dd9c3b5b. Reported-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-10-16cpufreq: remove CONFIG_CPU_FREQ_TABLEViresh Kumar1-1/+0
CONFIG_CPU_FREQ_TABLE will be always enabled when cpufreq framework is used, as cpufreq core depends on it. So, we don't need this CONFIG option anymore as it is not configurable. Remove CONFIG_CPU_FREQ_TABLE and update its users. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-15drivers: thermal: allow ti-soc-thermal run without pcb zoneEduardo Valentin1-0/+1
This patch changes the behavior of TI SoC thermal driver when there is a PCB thermal zone. Instead of reporting an error code when reading from PCB temperature sensor fails, this patch will make the driver attempt to compose the hotspot extrapolation based on bandgap readings only. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-10-15thermal: exynos: Provide initial setting for TMU's test MUX address at ↵Lukasz Majewski4-0/+13
Exynos4412 The commit d0a0ce3e77c795258d47f9163e92d5031d0c5221 ("thermal: exynos: Add missing definations and code cleanup") has removed setting of test MUX address value at TMU configuration setting. This field is not present on Exynos4210 and Exynos5 SoCs. However on Exynos4412 SoC it is required to set this field after reset because without it TMU shows maximal available temperature, which causes immediate platform shutdown. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-10-15thermal: exynos: Provide separate TMU data for Exynos4412Lukasz Majewski4-12/+37
Up till now Exynos5250 and Exynos4412 had the same definitions for TMU data. Following commit changes that, by introducing separate exynos4412_default_tmu_data structure. Since Exynos4412 was chronologically first, the corresponding name for TMU registers and default data was renamed. Additionally, new SOC_ARCH_EXYNOS4412 type has been defined. Moreover, the SOC_ARCH_EXYNOS name has been changed to SOC_ARCH_EXYNOS5250. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-10-15thermal: exynos: Remove check for thermal device pointer at ↵Lukasz Majewski1-2/+0
exynos_report_trigger() The commit 4de0bdaa9677d11406c9becb70c60887c957e1f0 ("thermal: exynos: Add support for instance based register/unregister") broke check for presence of therm_dev at global thermal zone in exynos_report_trigger(). The resulting wrong test prevents thermal_zone_device_update() call, which calls handlers for situation when trip points are passed. Such behavior prevents thermal driver from proper reaction (when TMU interrupt is raised) in a situation when overheating is detected at TMU hardware. It turns out, that after exynos thermal subsystem redesign (at v3.12) this check is not needed, since it is not possible to register thermal zone without valid thermal device. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-10-14Thermal: Check for validity before doing kfreedurgadoss.r@intel.com1-1/+2
The thermal_release function is called whenever any device belonging to 'thermal' class unregisters. This function performs kfree(cdev) without any check. In cases where there are more device registrations other than just 'thermal_zone' and 'cooling_device' this might accidently free memory allocated them silently; and cause memory errors. This patch changes this behavior by doing kfree(cdev) only when the device pointer belongs to a real cdev i.e. cooling_device. Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-10-09thermal/intel_powerclamp: Add newer CPU modelsJacob Pan1-0/+5
This will enable intel_powerclamp driver on newer Intel CPUs including some Ivy Bridge and Haswell processors. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-10-09Thermal: Tidy up error handling in powerclamp_initdurgadoss.r@intel.com1-3/+21
This patch * adds missing kfree() for cpu_clamping_mask * adds return value checking for alloc_percpu() * unregister hotcpu notifier in exit path Signed-off-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-10-09thermal: Kconfig: cosmetic fixesLuka Perkov1-2/+3
Fix typo, finish sentence and add missing dots. Signed-off-by: Luka Perkov <luka@openwrt.org> CC: Randy Dunlap <rdunlap@infradead.org> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-09-25Thermal: x86_pkg_temp: change spin lockSrinivas Pandruvada1-6/+8
x86_pkg_temp receives thermal notifications via a callback from a therm_throt driver, where thermal interrupts are processed. This callback is pkg_temp_thermal_platform_thermal_notify. Here to avoid multiple interrupts from cores in a package, we disable the source and also set a variable to avoid scheduling delayed work function. This variable is protected via spin_lock_irqsave. On one buggy platform, we still receiving interrupts even if the source is disabled. This can cause deadlock/lockdep warning, when interrupt is generated while under spinlock in work function. Change spin_lock to spin_lock_irqsave and spin_unlock to spin_unlock_irqrestore as the data it is trying to protect can also be modified in a notification call called from interrupt handler. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-09-25typo in drivers/thermal/Kconfig: lpatform instead of platformRegid Ichira1-1/+1
Applied to the HEAD of linux.git, VERSION = 3 PATCHLEVEL = 11 SUBLEVEL = 0 Signed-off-by: Regid Ichira <regid23@nt1.in> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-09-03drivers: thermal: add check when unregistering cpu coolingEduardo Valentin1-1/+5
This patch avoids NULL pointer accesses while unregistering cpu cooling devices, in case a NULL pointer is received. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-09-03thermal: thermal_core: allow binding with limits on bind_paramsEduardo Valentin1-4/+15
When registering a thermal zone device using platform information via bind_params, the thermal framework will always perform the cdev binding using the lowest and highest limits (THERMAL_NO_LIMIT). This patch changes the data structures so that it is possible to inform what are the desired limits for each trip point inside a bind_param. The way the binding is performed is also changed so that it uses the new data structure. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-09-03drivers: thermal: make usage of CONFIG_THERMAL_HWMON optionalEduardo Valentin1-3/+5
When registering a new thermal_device, the thermal framework will always add a hwmon sysfs interface. This patch adds a flag to make this behavior optional. Now when registering a new thermal device, the caller can optionally inform if hwmon interface is desirable. This can be done by means of passing a thermal_zone_params.no_hwmon == true. In order to keep same behavior as of today, all current calls will by default create the hwmon interface. Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-acpi@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: Zhang Rui <rui.zhang@intel.com> Suggested-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-09-03drivers: thermal: parent virtual hwmon with thermal zoneEduardo Valentin1-1/+1
When creating virtual hwmon devices based out of thermal zone devices, the virtual devices won't have parents. This patch changes the code so that the parent of virtual hwmon devices is the thermal zone device that they are based of. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-09-03thermal: hwmon: move hwmon support to single fileEduardo Valentin5-254/+331
In order to improve code organization, this patch moves the hwmon sysfs support to a file named thermal_hwmon. This helps to add extra support for hwmon without scrambling the code. In order to do this move, the hwmon list head is now using its own locking. Before, the list used the global thermal locking. Also, some minor changes in the code were required, as recommended by checkpatch.pl. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-29thermal: exynos: Clean up non-DT remnantsSachin Kamat2-19/+13
Commit 1cd1ecb6 ("thermal: exynos: Remove non DT based support") cleaned up some non-DT code. However, there were few more things needed for complete cleanup to make this driver DT only. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-29thermal: exynos: Fix potential NULL pointer dereferenceSachin Kamat1-3/+3
NULL pointer was being dereferenced in its own error message. Changed it to the correct device pointer. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-29thermal: exynos: Fix typos in KconfigSachin Kamat1-5/+5
Fixes some trivial typos. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-29thermal: ti-soc-thermal: Ensure to compute thermal trendRanganath Krishnan1-1/+5
Workaround to compute thermal trend even when update interval is not set. This patch will ensure to compute the thermal trend when bandgap counter delay is not set. Signed-off-by: Ranganath Krishnan <ranganath@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-29thermal: ti-soc-thermal: Set the bandgap mask counter delay valueRanganath Krishnan1-0/+7
Set the bandgap mask counter_delay with the polling_delay value on registering the thermal zone. This patch will ensure to get the correct update interval for computing the thermal trend. Signed-off-by: Ranganath Krishnan <ranganath@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-29thermal: ti-soc-thermal: Initialize counter_delay field for TI DRA752 sensorsRanganath Krishnan1-0/+5
Initialize MPU, GPU, CORE, DSPEVE and IVA thermal sensors of DRA752 bandgap with the counter delay mask. Signed-off-by: Ranganath Krishnan <ranganath@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-15Merge branch 'fixes' of .git into nextZhang Rui1-11/+21
2013-08-15thermal: step_wise: return instance->target by defaultEduardo Valentin1-11/+18
In case the trend is not changing or when there is no request for throttling, it is expected that the instance would not change its requested target. This patch improves the code implementation to cover for this expected behavior. With current implementation, the instance will always reset to cdev.cur_state, even in not expected cases, like those mentioned above. This patch changes the step_wise governor implementation of get_target so that we accomplish: (a) - default value will be current instance->target, so we do not change the thermal instance target unnecessarily. (b) - the code now it is clear about what is the intention. There is a clear statement of what are the expected outcomes (c) - removal of hardcoded constants, now it is put in use the THERMAL_NO_TARGET macro. (d) - variable names are also improved so that reader can clearly understand the difference between instance cur target, next target and cdev cur_state. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reported-by: Ruslan Ruslichenko <ruslan.ruslichenko@ti.com> Signed-of-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-15thermal: step_wise: cdev only needs update on a new target stateShawn Guo1-0/+3
The cooling device only needs update on a new target state. Since we already check old target in thermal_zone_trip_update(), we can do one more check to see if it's a new target state. If not, we can reasonably save some uncecesary code execution. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-15Merge branches 'exynos', 'imx' and 'fixes' of .git into nextZhang Rui4-0/+555
2013-08-15Thermal/cpu_cooling: Return directly for the cpu out of allowed_cpus in the ↵Lan Tianyu1-0/+2
cpufreq_thermal_notifier() cpufreq_thermal_notifier() is to change the cpu's cpufreq in the allowed_cpus mask when associated thermal-cpufreq cdev's cooling state is changed. It's a cpufreq policy notifier handler and it will be triggered even if those cpus out of allowed_cpus has changed freq policy. cpufreq_thermal_notifier() checks the policy->cpu. If it belongs to allowed_cpus, change max_freq(default to 0) to the desire cpufreq value and pass 0 and max_freq to cpufreq_verify_within_limits() as cpufreq scope. But if not, do nothing and max_freq will remain 0. This will cause the cpufreq scope to become 0~0. This is not right. This patch is to return directly after finding cpu not belonging to allowed_cpus. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-15thermal: exynos_tmu: fix wrong error check for mapped memoryNaveen Krishna Chatradhi1-1/+1
The error check is checking for a "base" mapped memory base instead of "base_common". Fixing the same. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-15thermal: imx: implement thermal alarm interrupt handlingPhilipp Zabel1-13/+127
Enable automatic measurements at 10 Hz and use the alarm interrupt to react more quickly to sudden temperature changes above the passive or critical temperature trip points. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-15thermal: imx: dynamic passive and SoC specific critical trip pointsPhilipp Zabel1-10/+40
Set passive and critical trip point values depending on the maximum die temperature stored in the OCOTP fuses. This allows higher trip points for industrial and automotive rated i.MX6 SoCs. Also allow to configure the passive trip point from userspace. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-13thermal: exynos: Support for TMU regulator defined at device treeAmit Daniel Kachhap1-0/+23
TMU probe function now checks for a device tree defined regulator. For compatibility reasons it is allowed to probe driver even without this regulator defined. Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add hardware mode thermal calibration supportAmit Daniel Kachhap4-1/+44
This patch adds support for h/w mode calibration in the TMU controller. Soc's like 5440 support this features. The h/w bits needed for calibration setting are same as that of enum calibration_type. Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Fix to set the second point correction valueAmit Daniel Kachhap1-4/+9
This patch sets the second point trimming value according to the platform data if the register value is 0. Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add thermal configuration data for exynos5440 TMU sensorAmit Daniel Kachhap3-0/+82
This patch adds configuration data for exynos5440 soc. Also register definations for the controller are added. Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add driver support for exynos5440 TMU sensorAmit Daniel Kachhap4-9/+90
This patch modifies TMU controller to add changes needed to work with exynos5440 platform. This sensor registers 3 instance of the tmu controller with the thermal zone and hence reports 3 temperature output. This controller supports upto five trip points. For critical threshold the driver uses the core driver thermal framework for shutdown. Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Jungseok Lee <jays.lee@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add support to access common register for multistanceAmit Daniel Kachhap1-0/+20
This patch adds support to parse one more common set of TMU register. First set of register belongs to each instance of TMU and second set belongs to common TMU registers. Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: use device resource management infrastructureAmit Daniel Kachhap1-13/+23
This patch uses the device pointer stored in the configuration structure and converts to dev_* prints and devm API's. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add TMU features to check instead of using SOC typeAmit Daniel Kachhap3-11/+52
This patch adds several features supported by TMU as bitfields. This features varies across different SOC type and comparing the features present in the TMU is more logical than comparing the soc itself. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Add support to handle many instances of TMUAmit Daniel Kachhap5-118/+203
This patch adds support to handle multiple instances of the TMU controllers. This is done by removing the static structure to register with the core thermal and creating it dynamically for each instance of the TMU controller. The interrupt is made shared type to handle shared interrupts. Now since the ISR needs the core thermal framework to be registered so request_irq is moved after the core registration is done. Also the identifier of the TMU controller is extracted from device tree alias. This will be used for TMU specific initialisation. Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13thermal: exynos: Remove non DT based supportAmit Daniel Kachhap1-16/+1
Recently non DT support from Exynos platform is removed and hence removing non DT support from the driver also. This will help in easy maintainence. Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>